Oregon Scientific PE826 инструкция обслуживания

1 EN Pedometer With 7-Day Memory (Model: PE823) Pedometer With Pulse Meter (Model: PE826) Pedometer With Panic Alarm (Model: PE828) T alking Pedometer W ith FM Radio (Model: PE829) USER MANUAL CONTENTS Introduction ............................................................... 2 Key Features ........................................................[...]

2 EN INTRODUCTION Thank you for selecting an Oregon Scientific TM pedometer (PE823 / PE826 / PE828 / PE829). These unique products are ideal for monitoring your exercise routine. The pedometer counts the number of steps taken from one location to another , calculating the total distance covered and calories expended. Other key functions include tar[...]

3 EN PE829 – FRONT AND BACK VIEW 1. LCD screen 2. MODE / SET button 3. / button 4. RESET / / / button 5. / button 6. Belt clip 7. Battery door 8. Pulse meter 9. Pulse rate button 10. LED light button 11 . LED light 12. Panic alarm pin 13. Fastening clip and chord 14. Selects radio channel 15. Radio ON 16. / Scan up and down FM frequency 17. Incre[...]

4 EN LCD 1. Shows when in T arget Mode 2. Shows when in T imer Mode and flashes when you are in another display and timer is running 3. Shows when Auto Announcement is activated – PE829 only 4. Shows when talk function is operational – PE829 only 5. Shows when FM Radio is operational – PE829 only 6. Shows when keypad lock is enabled 7. Shows [...]

5 EN 2. Frequent up and down movements, such as standing up and/or sitting down; running, jumping, or ascending/ descending stairs or steep slopes. USEFUL TIPS When changing settings you can: • Press and hold / to speed through the setting options. • Press SET to bypass or confirm a setting and move on to the next one. During setting mode, if a[...]

6 EN T ARGET To set step, distance or calorie target: 1. Press MODE to navigate to T arget Mode. 2. Press and hold SET for 2 seconds to enter setting mode. 3. Press / to select STEP , DIST ANCE or CALORIES. 4. Press SET to confirm. 5. Press / to change the value of each digit, and SET to confirm and move on to the next setting. To use target: 1. On[...]

7 EN 2. Press and hold SET for 2 seconds to enter setting mode. 3. Press / to select countdown or count-up timer and press SET . If the countdown timer is selected you will need to set the hr:min:sec by pressing / to change a value and SET to confirm. To use timer: • Press to start / stop the timer . • Press and hold to reset the timer . • Pr[...]

8 EN The bar at the bottom of the display will indicate which day’s memory record you are looking at. CLEAR ALL RECORDS Press and hold RESET . CLOCK / USER PROFILE TO SET THE USER PROFILE FOR 1 ST TIME USE OR AFTER A BA TTERY CHANGE When the installation tape is removed to activate the pedometer and whenever the batteries are changed, the pedomet[...]

9 EN CHANGE INDIVIDUAL CLOCK OR USER PROFILE SETTINGS If after the initial setting of the clock / user profile (as detailed in previous section), you wish to change the clock time or edit one of the user profile settings, simply: 1. Press MODE to navigate to Clock or User Profile Mode. 2. Profile Mode only; use / to scroll to the setting you wish t[...]

10 EN 4. Relax and put the tip of your thumb or index finger on the pulse sensor . 5. Wa it for about 10 seconds until the word FINISH appears on the LCD panel. 6. Repeat 3-5 if the calibration fails. It’s highly recommended to calibrate your individual stress index baseline once a month or whenever you want to refer to your parameter in differen[...]

11 EN A large heart rate variation is an indication that the parasympathetic nervous system has a predominance, which generally corresponds to someone in a relaxed state. As for a smaller value, it indicates that the sympathetic nervous system is active, which is related to physical or mental stress. HOW TO USE P ANIC ALARM (A V AILABLE IN PE828 ON[...]

12 EN To change the volume level, press . To listen to a stored channel, press CH . Prolonged use of the FM Radio will significantly reduce battery life. T ALK FUNCTION (AV AILABLE IN PE829 ONL Y) The talk function is available for DAIL Y / T ARGET / TIMER / MEMORY and CLOCK modes. It will broadcast information related to the current LCD screen, fo[...]

13 EN PE823 / PE826 To change the battery: 1. Gently press down on button with a blunt stylus to release battery compartment. 2. Insert 1 x CR2032 battery . 3. Gently push back the battery compartment. PE828 To change the battery: 1. Unscrew to open the back cover . 2. Insert 1 x CR2032 and 1 x 12V battery . 3. Place the cover back and tighten the [...]

14 EN • Do not use rechargeable batteries with this product. • Remove the batteries if storing this product for a long period of time. • Do not scratch the LCD display . The contents of this user manual and technical specifications are subject to change without further notice. Images not drawn to scale. SPECIFICA TIONS TYPE DESCRIPTION Step c[...]

15 EN ABOUT OREGON SCIENTIFIC V isit our website ( www .oregonscientific.com) to learn more about Oregon Scientific products such as digital cameras; MP3 players; children’s electronic learning products and games; projection clocks; health and fitness gear; weather stations; and digital and conference phones. The website also includes contact inf[...]