Palsonic TFTV-760 инструкция обслуживания

PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL: (02) 9313 7111 FAX: (02) 9313 7555 www.palsonic.com.au PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA: 1300 657 888 76CM CORDLESS REMOTE LCD TV/MONITOR MODEL: TFTV-760 OWNER'S MANUAL Type Tested Electrical Safety AS/NZS 3250 Lic 3250 Standards Australia APP No: N1733[...]

Contents Congratulations on your purchase of this Palsonic LCD TV/MONITOR. We recommend that your thoroughly read this manual before use to fully enjoy the many functions and excellent effects of this LCD TV/MONITOR. Retain this manual in an easily accessible location for future reference. Note: Screen displays and illustrations in this manual may [...]

Important Safety Cautions 2 When any unusual situation occurs, turn off the power supply at once and remove the plug from the wall outlet. Contact a qualified service department in your local area. Water and moisture - Do not use this product near water - for example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or nea[...]

3 This TV set can be operated on a power of ~240V 50Hz. You must not use a power supply of any other type. When relocating the product placed on a trolley, it must be moved with the utmost care. Sudden stops, excessive force and uneven floor surfaces can cause the product to fall from the trolley. The power cords must be routed properly to prevent [...]

To select input signal Channel up Volume up Volume down Identification of controls 4 Front Channel down To enter into MENU Power on/Standby Remote sensor Indicator[...]

5 Back Speaker outputs Antenna input Earphone jack PC audio line in S-video input VGA input HDTV YPbPr inputs ANT IN VIDEO S-VIDEO VGA R L R L PHONE LINE IN Pb Pr Y Cr Cb Y R L + - + - HDTV Video input DVD inputs DC input Audio inputs HDTV Audio inputs[...]

Still picture Volume down Zoom select To enter into MENU Input signal select Channel select Power on/Standby Channel down Sleep timer Volume up On-screen display Channel up Previous channel Clock/Timer setting Auto correct picture Sound Mute Identification of controls (continued) 6 Remote Control STILL Bass+ Bass - Treb- Treb+ OSD POSITION POWER CH[...]

Effective remote range Battery installation 7 Please install the batteries before using the remote control unit. Notes: When the remote control will not be used for a long period of time or when the batteries are worn out, remove the batteries. Do not throw the batteries into a fire. Dispose of used batteries in the specified manner. Do not drop, d[...]

Installation 8 Before using this equipment, please connect the AC power adaptor correctly. Optimum reception of colour requires a good signal and will generally mean that an outdoor aerial must be used. The exact type and position of the aerial will depend upon your particular area. Notes: Turn off the power firstly when you connect a outdoor anten[...]

ANT IN VIDEO S-VIDEO VGA R L R L PHONE LINE IN Pb Pr Y Cr Cb Y R L + - + - 9 To audio outputs To S-video input To video output To ANT output Video equipment without S-video terminal Video equipment with S-video terminal To ANT output Connecting video/audio equipment To ANT input Y Yellow (video) White (audio L/MONO) Red (audio R) W R Y R W Y R W R [...]

Installation (continued) 10 Connecting DVD Player and speakers To speaker To YCbCr outputs To audio outputs ANT IN VIDEO S-VIDEO VGA R L R L PHONE LINE IN Pb Pr Y Cr Cb Y R L + - + - W R White (audio L/MONO) Red (audio R, Cr) Green (Y) Blue (Cb) W R G B R G B W R To audio inputs R G B To YCbCr inputs DVD Player To speaker Red Black Red HDTV[...]

11 Connecting YPbPr terminals SET TOP BOX (Or other equipment with YPbPr output terminals) ANT IN VIDEO S-VIDEO VGA R L R L PHONE LINE IN Pb Pr Y Cr Cb Y R L + - + - White (audio L/MONO) Red (audio R, Pr) Green (Y) Blue (Pb) W R G B To YPbPr outputs To audio outputs To audio inputs To YPbPr inputs W R R G B W R R G B HDTV[...]

Installation (continued) 12 Connecting VGA interface To VGA output interface To VGA input interface To LINE out To LINE in Equipment with VGA output interface ANT IN VIDEO S-VIDEO VGA R L R L PHONE LINE IN Pb Pr Y Cr Cb Y R L + - + - HDTV[...]

13 Elevation adjustment You can adjust the angle of the LCD TV/Monitor as follows. The elevation can be adjusted from -5 0 to +10 0 . 10 0 -5 0[...]

Bass Treble Balance + + + - - - 25 25 25 <V-> or V+> key to change Brightness Contrast Color Sharpness Tint + + + + + - - - - - 50 50 50 50 50 Menu Introduction 14 There are four pages of MENU in TV, PC and YPbPr mode. In MENU operations, the CH / buttons are used to select item upwards or downwards; the VOL+/- buttons are used to adjust o[...]

15 Bass Treble Balance + + + - - - 25 25 25 <V-> or V+> key to change <V-> or V+> key to change <V-> or V+> key to change SOUND Press MENU button Press MENU button Press MENU button Press MENU button in PC mode To adjust picture's brightness and contrast in PC mode. (not affect picture in TV or AV mode) If the best p[...]

1. 2. 3. Notes: Turning On/Off 16 Turning On Turning Off Selecting input signal This TV set can automatically turn off by: 1. When there is no TV signal input for about 15 minutes; 2. Sleep timer; 3. Off timer. 1. 2. 3. Insert the output plug of the AC power adaptor into the DC power input of the unit. Press the power switch on AC power adaptor and[...]

Auto search Search Fine Tune Change Prog Current Prog Change to Prog Skip 12 15 ON CHANNEL SETTING <V-> or V+> key to change Fine Tuning Notes: Channel Preset 17 To enter into CHANNEL SETTING menu Manual Search Auto Search 1. Press MENU button repeatedly to display CHANNEL SETTING menu. 2. Press CH or CH button to select item. 3. Press VOL[...]

Channel Edit Channel Skipping You can skip unnecessary channels by using Skip function when you browse program by CH buttons. Use 0~9 digit buttons or CH buttons to select a unwanted channel firstly, then enter into CHANNEL SETTING menu and select Skip item. Press VOL+/- button to select ON to skip this channel. Now this channel will be skipped whe[...]

STILL Bass+ Bass - Treb- Treb+ OSD POSITION POWER CH CH VOL VOL + - P .M AUTO.ADJ DSP A V 0 8 7 4 5 1 2 3 6 9 - / -- MENU C.SYS ZOOM CLK SLP ENTER Press -/-- button repeatedly to display "--". Press 1-9 buttons. Press 0-9 buttons. - - -1 18 To select three-digit channel: To select two-digit channel: - Press 0-9 direct channel selector. Pr[...]

Using STILL button Picture Adjustment 20 Adjusting picture * Note: The item Tint is for NTSC only. Bright Contrast Saturation Sharpness Tint* Item VOL- VOL+ lighter stronger deeper sharper greenish darker weaker paler softer purplish 1. Press MENU button to display PICTURE SETTING menu. 2. Press CH button to select item. 3. Press VOL+/- button to a[...]

Notes: Sound 21 Adjusting Sound Adjusting Volume Muting the Sound Setting Sound mode Item Bass Treble Balance VOL- weaker weaker decreases the right channel VOL+ stronger stronger decreases the left channel 1. Press MENU button repeatedly to display SOUND menu. 2. Press CH button to select item. 3. Press VOL+/- button to adjust the selected item. Y[...]

System setting 22 Sound system Setting OSD Language Colour system STILL Bass+ Bass - Treb- Treb+ OSD POSITION POWER CH CH VOL VOL + - P .M AUTO.ADJ DSP A V 0 8 7 4 5 1 2 3 6 9 - / -- MENU C.SYS ZOOM CLK SLP ENTER <V-> or V+> key to change Color sys Sound sys Language OSD position Scaler mode OSD background AUTO BG Eng Upper Left Anamorphic[...]

STILL Bass+ Bass - Treb- Treb+ OSD POSITION POWER CH CH VOL VOL + - P .M AUTO.ADJ DSP A V 0 8 7 4 5 1 2 3 6 9 - / -- MENU C.SYS ZOOM CLK SLP ENTER Notes: Notes: Setting OSD position 23 Setting Scaler mode Setting OSD Background From the SETUP menu, press CH to select OSD position item. Press VOL- or VOL+ button to select an OSD position in your pre[...]

On Turn on 7 Turn on Channel Timer 24 Use CLK button STILL Bass+ Bass - Treb- Treb+ OSD POSITION POWER CH CH VOL VOL + - P .M AUTO.ADJ DSP A V 0 8 7 4 5 1 2 3 6 9 - / -- MENU C.SYS ZOOM CLK SLP ENTER Use SLP button Press SLP button repeatedly to set sleep time between: 0, 10, 20, 30, 60, 90,120,180,240 minutes. If you select 0 minute, it means the [...]

To enter into YPbPr mode Adjustments in YPbPr mode 25 Repeatedly press AV button on the remote control or SOURCE button on the set's panel until the screen display YPbPr, which indicates that the set is in YPbPr mode. Connect the YPbPr terminals to Set Top Box and make sure there is a signal input. In YPbPr mode when there is correct input sig[...]

To enter into PC mode Adjustments in PC mode 26 Repeatedly press AV button on the remote control or SOURCE button on the set's panel until the screen display PC , which indicates that the set is in PC mode. Please connect VGA input and be sure that there is VGA input signal. The signal format should be one of the follows: 640 x 480 @60Hz 640 x[...]

27 Adjusting brightness and contrast You can adjust bright and contrast in PC mode and this adjustment does not effect the brightness and contrast in TV and AV mode. When there is correct input signal, press MENU button and PICTURE SETTING menu appears. Use CH to select item and VOL+/- to adjust / If you can not obtain the best display after auto c[...]

Trouble shooting 28 Before calling service personnel, please check the following chart for a possible cause to the trouble you are experiencing. Power is not turned on. Poor colour, poor tint. Spots appear on the screen. Stripes appear on the screen. Be sure the power cord is plugged in. Contrast, colour, tint are not correctly adjusted. Possible i[...]

Specifications Power Supply for AC adaptor: Power Consumption: Dimensions (mm): Gross Weight (kg): SCREEN (cm): TV system & channel range. SYSTEM PAL-B/G Colour system: Sound output: Accessories ~240V 50Hz 160W 932 (W) x 553 (H) x 245 (D) 17.5 76 VHF 2-12 PAL BG, NTSC Playback 5W x 2 One remote controller; One AC adaptor; One VGA cable, One wal[...]

PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL: (02) 9313 7111 FAX: (02) 9313 7555 www.palsonic.com.au PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA: 1300 657 888 604-L32B13-00[...]