Palsonic VCR9600 инструкция обслуживания

VCR-9600 OWNER’S MANUAL VIDEO CASSETTE RECORDER Type Tested Electrical Safety AS/NZS 3250 Lic 4168 Standards Australia[...]

How to Use This Manual Please read this Owner ’s Manual carefully before using the VCR and store it in a safe place for future reference. This Owner ’s Manual explains how to use your VCR and, in particular , using the remote control unit keys to control the VCR. Keys on the VCR itself that have the same label as their counterparts on the remot[...]

Remote control unit[...]

Front Panel REMOTE SENSOR Multi-display REC.button (REC/OTR) CHANNEL V/ buttons STOP/EJECT button FF button PLAY button REW button Cassette loading slot OPERATE/TIMER button Rear Panel AC Mains cord CLEAR button TEST SIGNAL switch AUDIO OUT Jack AUDIO IN Jack RF OUT socket CH ADJ (RF CHANNEL ADJUSTER) ANT. IN socket VIDEO IN Jack VIDEO OUT Jack Mul[...]

NOTICE: Unauthorized recording of copyrighted television programmes, films, video tapes and other materi- als may infringe on the rights of copyright owners and be contrary to copyright laws. WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER[...]

INTRODUCTION........................................... E-4 RemoteControl Operation....................... E-4 Video Cassette Tape............................... E-4 INSTALLATION............................................. E-5 Equipment Connection............................ E-5 TV Antenna......................................... E-5 Connection of[...]

. Remote Control Operation This VCR can be operated with the remote control from up to a distance of about 23 feet (7 meters) and within an angle of 15 degrees either side of center. There must be no obstacles between the remote control unit and the remote sensor of the VCR. Battery Installation Remove the battery cover on the rear of the unit. (Se[...]

Equipment Connection TV Antenna T o watch a picture from the VCR using this connection, it is necessary to set one of the TV channels as the "Video channel". See Preparations in V ideo Channel Setting (on Page 6). 1. Connect the antenna (or CATV) connector to the ANT. IN socket. 2. Connect the accessory coaxial cable between the RF OUT so[...]

Language Clock AMS Video Channel Setting Initial Settings This setting is necessary for RF connections (when the SCART cable is not used to connect this unit and the TV). This setting is not necessary for AV connections using the SCART cable. Start from the initial Settings in the next section. When the video channel setting is complete and you pre[...]

1. Set the On-screen Language 1. 2. 1. 2. 3. Initial Setting Up Select the language you want by using the buttons to display it inverted. When you press the MENU button, that language is set and the CLOCK SET screen appears automatically. Changing the Language after the Initial Settings Press the MENU buttonand call up the menu screen. Select the l[...]

Menu Screen/Mode Screen Using the Menu Screen When you press the MENU button, the menu screen is called up. When you press the MENU button again, the unit returns to the normal screen. Select the item you want by using the buttons to highlight its screen setting, then press the SHIFT> button to move to the selected screen. TIMER PROGRAM CHANNEL [...]

CHANNEL PRESET There are two ways to preset channels: Automatic tuning with AMS and manual tuning. AMS Operation Automatic tuning with AMS is executed during the initial settings, so normally it is not necessary. AMS is neces- sary at such times as when you take the unit to another region. See Initial Settings 3 AMS (Auto Memory Sys- tem) on Page7.[...]

Tuning with the Buttons 1. 2. Press the OPERATE/TIMER button to turn on the VCR. Press the buttons to select the position number to which the desired channel has been preset. P10 Notes Notes Tuning with the Number Buttons (Remote Control Only) For channels preset in single-digit position Press the 0 button, then the corresponding number button (1 t[...]

Basic Operation 1. 2. 3. 4. Press the OPERATE/TIMER button. Insert a cassette tape into the CASSETTE LOADING SLOT. Turn on the TV and select the channel for video viewing. Press the PLAY button to start playback. To stop playback: Press the STOP/EJECT button. To rewind a tape in Stop mode: Press the REW button. To advance a tape rapidly in Stop mod[...]

Search The Picture Search function is a convenient way to locate a desired portion of the tape quickly . Forward Search: To view high-speed pictures in the forward direction 1. In the Playback mode, press the FF button. 2. Press the FF button again to search faster. 3. To resume normal playback, press the PLAY button. Reverse Search: To view high-s[...]

1 Minute Skip With this feature you can skip over one minute’s worth of commercials recorded on a tape. Pressing the SKIP/ZERO RTN button in Play mode to forward search the tape for 60 seconds, then returns the VCR to Play mode. Pressing the SK/P/ZERO RTN button while it is fast forwarding through the commercials (Skip mode) will return the VCR t[...]

Basic Operation Auto Turn on System 1. 2. 3. 4. 5. Press the OPERATE/TIMER button. Press the buttons to select a desired channel to be recorded. Insert a cassette tape with a safety tab. Press the REC button to start recording. To finish recording, press the STOP/EJECTbutton. Checking the Picture Being Recorded Turn on the TV and tune to the channe[...]

One-touch Timer Recording (OTR) This allows you record for up to 5 hours with automatic turn-off. 1. 2. Press the REC button during recording. The VCR enters OTR mode. Select the recording duration by pressing the REC button repeatedly. The OTR indication appears on the TV screen. The OTR recording will start immediately. OTR 1:30 P23 OTR 0:30 2:00[...]

A maximum of 8 events can be programmed within a period of one month including the present day for timer recording. A timer recording can be activated at the same time on the same day every week, on every day or on weekdays, as well as on a particular day. Program example Current time and date August 20, 1995 (Sunday), 10:20 am This example records[...]

Hints on Programming In Step 4, you can select various "EV" (every week) recording of the same channel at the same time modes as well as recording on a particular day. Press the V button when the current day on the calendar blinks or press the button, exceeding the last day of the calendar (the day after one month). The DATE indication on[...]

Check the following list of problems and remedies before calling service personnel. The problem may be one you can solve yourself. SYMPTOM CAUSE REMEDY No power supply to the VCR. AC Mains Cord is not connected. Connect the AC Mains cord to the AC outlet. Power is on but the VCR does operate. Dew condensation inside the VCR. Leave the VCR with the [...]

SPECIFICATIONS GENERAL SECTION Power Requirements Power Consumption Dimensions (W x H x D) Weight Operating Temperature Operating Humidity Video Recording System Number of Video Heads Tape Speed Tape Format Record/Playback Time VIDEO SECTION Television System Modulation System Horizontal Resolution Input Level Output Level Signal-to-Noise Ratio AUD[...]

PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL:(02)9313 7111 FAX:(02)9313 7555 www.palsonic.com.au PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA: 1300 657 888[...]