Panasonic AW-DU600 инструкция обслуживания

Model A W - P Before attempting to connect, operate or adjust this product, please read these instructions completely. Dial Up Adapter[...]

2 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “danger[...]

3 Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Parts and their functions . . . . . . . . . . . . . . . . . . . . . . . . . 4 Control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Rear panel[...]

4 P arts and their functions $ Contr ol panel 2 1 3 4 5 1 POWER indicator This lights when power is supplied to the main unit and the POWER switch is set to ON. 2 POWER switch This is the unit’s power switch. 3 LCD panel This displays the current statuses and menu settings. 4 Operating keys These keys are used for dialing and to perform menu sett[...]

5 6 RS-232C CONTROL OUT connectors (P1 to P5) These connectors are used to connect the pan-tilt head system controlled with RS-232C. <Note> These connectors cannot be used in conjunction with the RS-422 CONTROL OUT connectors 7 . 7 RS-422 CONTROL OUT connectors (P1 to P5) These connectors are used to connect the pan-tilt head system controlle[...]

6 Connections T ransmitting system connections Connect the control panel When an AW-RP605 is used Turn off the power of all components before proceeding with the connections. O When an AW-RP301 or AW-RP501 is being used, connect the receiving pan-tilt head system to the P1 CONTROL OUT connector. O When an AW-RP505 or AW-RP605 is being used, it is p[...]

7 Connections Dial Up Adapter settings 1 Set this adapter to transmit mode. Press the key ( i ) to open the menu settings. When “Menu-1 Function” appears on the LCD panel, use the ! # keys and select Tx (transmit mode). STOP START START 2 MENU+ 2 Select the telephone line. Press the key ( i ) to change the menu setting item. When “Menu-2 Modu[...]

8 Receiving system connections Connections $ Connect the pan-tilt head system to the RS-232C CONTROL OUT connector: When an AW-PH300A is used and the connection distance is 10 m or less: When an AW-PH600 is used: Telephone line Telephone line Modem Modem AW-DU600 AW-DU600 AW-PS301 AW-PS301 AW-PS600 P-T CONTROL AW-CA50D15 (component) AW-CA50A15 (com[...]

9 Connections $ Connect the pan-tilt head system to the RS-422 CONTROL OUT connector: Use the RS-422 connector when the AW-PH350 is to be used as the pan-tilt head or when the connection distance between this adapter and the pan-tilt head is to exceed 10 m. When an AW-PH350 is used: When an AW-PH300A is used and the connection distance is more than[...]

10 Connections When an AW-PH600 is used and the connection distance is more than 10 m: Telephone line Modem AW-DU600 AW-PS301 AW-PS600 P-T CONTROL CAMERA CONTROL G/L video (BNC cable) Video (BNC cable) COMPONENT AW-CH600 AW-PH600 RS-232C/RS-422 converter 10 Base-T cable AC adapter AW-CA50D15 (component) AW-CA50A15 (composite) AW-CA24U10 AW-CA16U10 [...]

11 Connections Menu j 1 Function Tx Rx Direct Menu j 5 Output j 1 RS j 232C RS j 422 When the settings are completed, press the key ( i ) once again to exit the menu settings. START 2 MENU+ Receiving system connection procedure 1. Connect the AW-PS301 AC adapter to the DC 12V IN connector on this adapter. 3. Connect the telephone line to the line i[...]

12 Connections 0123456789 1: Press Start Making a call Make a call from the AW-DU600 of the transmitting system. 2. Use the number keys on this adapter to enter the desired number. The telephone number entered appears on the top section of the LCD panel. <Note> While the telephone line is being connected, none of the operating keys on the ada[...]

13 Connections $ Direct mode Control the pan-tilt head system directly using this adapter: 1. AW-DU600 AW-PS301 AW-CA50T29 (composite) AW-CA50C29 (component) AW-PH350 AW-PS300 10 Base-T cable Convertible camera[...]

14 Connections Connection procedure 2( : ): Up 8( ; ): Down 4( ! ): Left 6( # ): Right 1 (TELE): Zoom in 7 (WIDE): Zoom out 3 (FAR): Focus (long-distance) 9 (NEAR): Focus (close-up) 5 (BAR): Color bar output 0 (CAM): Camera thru output 3 Select the pan-tilt head system to be controlled. Press the key ( i ) to change the menu setting item. When “M[...]

15 Connections AW-DU600 Control panel AW-PS301 AW-PS301 AW-CA50T29 AW-PH350 AW-PS300 10 Base-T cable Convertible camera AW-DU600 AW-PS301 PC AW-CA50T29 AW-CA50T9 AW-PH350 AW-PS300 10 Base-T cable Convertible camera Control the pan-tilt head system using a control panel or PC: 2. Coaxial cable (5C-2V) 10Base-T cable <Note> AW-RP605 cannot be u[...]

16 Connections 2 Select the connector for input of control signals from the controller. Press the key ( i ) to change the menu setting item. “Menu-4 Input” appears on the LCD panel. Select the CONTROL OUT connector to be used using the ! # keys. When control is to be performed from a control panel, select RS-422 and select RS-232C when it is to[...]

17 ST ART 1 M1 2 M2 0 DEL CAM 5 M5 TELE 3 M3 FA R 78 WIDE 9 NEAR 4 M4 MENU CLEAR STOP MENU RECALL 6 BAR Menu settings O Press the key ( i ) and the first menu item will appear on the LCD. O Press the key ( i ) while a menu item is displayed on the LCD and the display will move to the next item. O Press the key ( i ) again and the last menu item wil[...]

18 Menu settings $ Dial memory Menu-6 Output-2 (Initial setting: P1) This setting selects which pan-tilt head system is to be controlled by this adapter when this adapter is in Direct mode. The pan-tilt head system connected to the RS-232C or RS-422 P1 connector is controlled. P1 P2 P3 P4 P5 The pan-tilt head system connected to the RS-232C or RS-4[...]

19 Attaching the rac k mounting adapters Changing the position of the rear panel To install the adapter in a rack, use the rack mounting adapters and four of the mounting screws (M4) supplied. 1 . Remove the three screws from the bottom panel and remove the blank panel. 2 . Remove the three screws from the rear panel and remove the rear panel. 3 . [...]

20 Attaching the joint angle adapter To attach the adapter to the controller, use the joint angle adapter, rack mounting adapter and mounting screws (M4 x 8) supplied. Rack mounting adapter Screw Joint angle adapters[...]

21 Specifications indicates safety information Power supply: DC 10.8V to DC 16V Power consumption: 5 W Permissible temperatures Storage: j 20˚C to 60˚C Operating: j 10˚C to 45˚C Standard: i 5˚C to 35˚C Permissible humidity Storage: 30% to 90% (without condensation) Weight: 3.7 lb (1.7 kg) Dimensions (W k H k D): 8-1/4 k 3-3/8 k 6-7/8 inch (21[...]

22[...]

23[...]

PANASONIC BROADCAST & TELEVISION SYSTEMS COMPANY UNIT COMPANY OF MATSUSHITA ELECTRIC CORPORATION OF AMERICA Executive Office: One Panasonic Way 4E-7, Secaucus, NJ 07094 (201) 348-7000 EASTERN ZONE: One Panasonic Way 4E-7, Secaucus, NJ 07094 (201) 348-7621 Southeast Region: 1225 Northbrook Parkway, Ste 1-160, Suwanee, GA 30024 (770) 338-6835 Cen[...]