Panasonic AWHE60HE инструкция обслуживания

Operating Instructions <Operations and Settings> HD Integrated Camera VQT4M09A(E) M0712MS0 -FJ ENGLISH   HowtheOperatingInstructionsareconfigured <Basics>: The <Basics> describes the procedure for basic operation and installation. Before installing this unit, be sure to take the time to read through <Basics[...]

2 T rademarks and registered trademarks p  Microsoft ® , Windows ® , Windo ws ® 7, Inter net Explorer ® , ActiveX ® and DirectX ® are either registered tr ademarks or trademarks of Microsoft Cor poration in the United States and other countries. p  Intel ® and Intel ® Core TM are trademarks or registered trademarks of Intel Cor porati[...]

3 Contents Before use ........................................................................... 4 Overview .......................................................................... 4 Required personal computer environment ....................... 4 Disclaimer of warranty ...................................................... 5 Network security ..[...]

4 Bef ore use p w Overview p  This unit is a compact full HD camera integr ated with a pan-tilt head and f eaturing a 1/3-type full HD MOS sensor and digital signal processor (DSP). p  In addition to its optical 18  zoom lens , the unit comes with a 10  digital zoom to achie v e high-quality shooting that ov erflows with ambiance . p ?[...]

5 Bef ore use (contin ued) IMPOR T ANT p  Failure to pr ovide the required per sonal computer en vironment ma y slow do wn the delineation of the images on the screen, make it impossible f or the web bro wser to work and cause other kinds of prob lems. p  When using Microsoft ® Windows ® 7, ref er to the “Notes on Windows ® 7” (page 10[...]

6 Bef ore use (contin ued) p w Concerning the plug‑in viewer software p  This is necessary only when using a personal computer running Windows. In order to displa y the IP videos on this unit, the “Netw ork Camera Vie w4” plug-in view er software must be installed. Either install the software directly from the unit or clic k the [Install] [...]

7 Basic shooting operations 1 Set the subject brightness to the appropriate level. 2 T urn on the power of all the units and devices in the system. 3 Select the unit to be operated. Even when using only one unit, it m ust still be selected from the wireless remote control or controller . 4 Select the shooting mode. Select one of the f o[...]

8 Ho w to turn the po wer on and off p w T urning the power on When performing the operations using the wireless remote control 1 Set all the power s witches of the units and devices connected in the system to ON. p  This unit does not hav e a pow er switch. When power is supplied to it, the status displa y lamp will light up orange. The init[...]

9 How to turn the po wer on and off (continued) p w T urning the power off When performing the operations using the wireless remote control 1 Press one of the [CAM1] to [CAM4] buttons on the wireless remote control to select the unit. 2 Press the [ON/ST ANDBY] button on the wireless remote control f or 2 seconds. The unit’ s pow er is tur n[...]

10 Selecting the units Up to f our units can be operated using one wireless remote control. Up to five units and de vices can be operated using one controller . Select the unit (or units) to be operated from the wireless remote control or controller . Even when using only one unit, it m ust still be selected. When performing the operations using th[...]

11 Selecting the shooting modes (scene files) (continued) p w How to select the shooting mode When performing the operations using the wireless remote control 2, 8 4, 6, 7 3, 5, 7 1 1 Press the [CAM1], [CAM2], [CAM3] or [CAM4] button to select the unit. 2 Press the [MENU] button f or 2 seconds. The T op Menu is displa y ed. Top Menu Camera Sc[...]

12 Selecting the shooting modes (scene files) (continued) When performing the operations using the contr oller When the A W ‑RP655 is connected: 1 Press one of the [1] to [5] buttons of [CONTROL/PREVIEW MONIT OR OUT SEL] to select the unit which is to be operated. 2 Press the [MENU] button to set the LCD panel display to the men u mode . 3?[...]

13 Shooting When performing the operations using the wireless remote control p q Changing the camera’ s direction Moving the camera towar d the left or right (panning): Press the [  ] or [  ] button. Moving the camera up or down (tilting): Press the [  ] or [  ] button. Moving the camera diagonally: Press the [  ] or [  ] button[...]

14 What to do when encountering pr ob lems in the basic shooting operations If the trouble is not resolv ed by taking the action suggested below , refer to “T roubleshooting” (page 43 in the <Basics>). When performing the operations using the wireless remote control The unit does not move. p  Press the [CAM1], [CAM2], [CAM3] or [CAM4] [...]

15 More ad v anced operations Manual shooting (see pages 16 to 19) p  Manual adjustment of f ocus p  Manual adjustment of iris p  Manual adjustment of shutter speed p  Manual adjustment of gain Preset memories (see pages 20 to 22) p  Up to 100 settings f or the camera direction (panning and tilting), zoom, f ocus, iris, gain up and w[...]

16 Manual shooting p w Manuall y adjusting the f ocus The lens f ocus can be adjusted manually . When performing the operations using the wireless remote control 1 Press the [M/FOCUS] button to s witch the focus to man ual adjustment. 2 Press the [F] or [N] button of [FOCUS] to adjust the focus. When the [F] button is pressed, the f ocus mov [...]

17 Manual shooting (continued) p w Manuall y adjusting the iris The lens iris can be adjusted manually . When performing the operations using the wireless remote control 1 Press the [M/IRIS] button to s witch the iris to manual adjustment. 2 Adjust the iris using the [IRIS +] or [IRIS –] button. Press the [IRIS +] button to adjust the lens [...]

18 Manual shooting (continued) p w Manuall y adjusting the shutter speed The shutter speed can be set using two methods. One is a method that specifies the time (where a time such as 1/250 sec. is designated), and the other is a method that specifies the frequency (where synchro scan, 60.24 Hz*, etc. is designated). When shooting a TV screen or PC [...]

19 Manual shooting (continued) p w Manuall y adjusting the gain There are two wa ys to adjust the gain. One wa y inv olves using the buttons on the wireless remote control or controller; the other wa y inv olv es using the Camera menu or W eb setting. The gain can be adjusted more precisely using the Camera menu or W eb setting. F or fur ther detai[...]

20 Preset memories This unit enables up to 100 settings f or the camera direction (panning and tilting), zoom, f ocus, iris, gain and white balance to be registered in its preset memories, and called. Howe v er , the number of settings that can be registered and called depends on the type of wireless remote control or controller that is used f or o[...]

21 Preset memories (continued) When performing the operations using the contr oller When the A W ‑RP655 is connected: Up to 50 settings can be registered and called. The [1] to [50] buttons of [TRA CING/PRESET MEMOR Y] correspond to the unit’ s preset memories No .1 to No .50. p q Registering the settings in the preset memories 1 Set to the [...]

22 Preset memories (continued) When the A W ‑RP555 is connected: Up to 10 settings can be registered and called. The [1] to [10] buttons of [PRESET] correspond to the unit’ s preset memories No.1 to No .10. p q Registering the settings in the preset memories 1 Display the picture to be shot on the monitor . Operate the [P AN/TIL T] le ver an[...]

23 White balance adjustment p w White balance adjustment In order f or the white to be reproduced accurately , the ratio between the three primar y colors (RGB) is adjusted. If the white balance has shifted out of adjustment, not only will the white be reproduced poorly but the color tones of the entire screen will also be degraded. p  This adju[...]

24 White balance adjustment (continued) 5 Press the [  ] or [  ] button to bring the cur sor to “A WB Mode”. 6 Press the [  ] button. “A WB Mode” star ts blinking. 7 Press the [  ] or [  ] button to c hange the A WB mode to be used to “A WB A” or “A WB B”, and press the [  ] button to enter the selection. [...]

25 White balance adjustment (continued) When the A W ‑RP50 is connected: Ref er to the Operating Instructions of the controller . p  White balance ma y not be correctly set if the lighting of the object is too weak. p  Since the unit has a built-in memory , the set white balance will remain in the memor y e ven if po wer is turned off. Ther[...]

26 White balance adjustment (continued) p q Manual adjustment (R gain and B gain adjustment) White balance can be adjusted manually . When performing the operations using the wireless remote control p  Steps 1 through 6 represent the procedure f or selecting the “A WB A” or “A WB B” memor y . The y need not be taken if a selection has al[...]

27 Blac k le vel (master pedestal) adjustment p w Blac k level (master pedestal) adjustment The blac k le vel can be adjusted when using a multiple number of cameras including the unit. Ask your dealer to perf or m this adjustment. (Use an oscilloscope or wa vef orm monitor for the adjustment.) Adjust the blac k le vel in accordance with the units [...]

28 Blac k level (master pedestal) adjustment (continued) When performing the operations using the contr oller When the A W ‑RP655 is connected: 1 Press the [IRIS] button se veral times to turn off its lamp. Set the iris to the manual ([MANU]) mode. 2 T urn the [FOCUS/IRIS] dial to stop down the lens iris. 3 Press the [R/B GAIN/PED] butto[...]

29 Genloc k adjustment (A W ‑HE60S onl y) p w Genloc k adjustment The genlock adjustment is perf ormed to achiev e phase alignment by applying e xternal synchronization (genlock) when a multiple number of camer as will be used or when the unit will be used in combination with other de vices. This unit suppor ts the BBS signal as the genlock signa[...]

30 Genloc k adjustment (A W ‑HE60S onl y) (continued) p q Color phase adjustment The color phase adjustment must be perf ormed if the pictures are to be s witched using a video switcher or other de vice when the video output signals hav e been set as composite signals. It need not be perf or med when the video output signals hav e been set as com[...]

31 Genloc k adjustment (A W ‑HE60S onl y) (continued) When performing the operations using the contr oller These operations can be perf ormed using the camera menus b y follo wing the operation steps in “Basic operations” (pages 32 to 39). T o s witch between “BAR” (color bar display) and “CAM” (camera pictures), press the [MODE] or [[...]

32 Basic operations Camera menus are displa y ed on the monitor when the unit’ s settings are to be selected. The monitor is connected to the video signal output connector . The basic camera menu oper ations inv olve displa ying sub-menus from the T op Menu items, and selecting settings on the sub-menus. Some sub-menus ha ve menu items f or perf [...]

33 Basic operations (continued) Camera menu operation Wireless remote control Controller A W ‑RP655 A W‑RP555 A W ‑RP50 Returning to the previous menu With the cursor at the [Return] position, press the [  ] button. With the cursor at the [Return] position, press the jog dial (main). With the cursor at the [Return] position, press the [ITE[...]

34 Basic operations (continued) p w When perf orming the operations using the wireless remote contr ol 1 Press the [CAM1], [CAM2], [CAM3] or [CAM4] button to select the unit whic h is to be operated. 2 Press the [MENU] button f or 2 seconds. The T op Menu is displa y ed. 3 Press the [  ] or [  ] button to bring the cur sor to the ite[...]

35 Basic operations (continued) p w Contr ol ex er cised from the Multi‑Function Contr oller A W ‑RP655 For executing A WB. *1, *2 Jog dial (main) When the LCD is in the gain adjustment mode ([GAIN] button: MANU) Select the desired gain setting from GAIN 0 dB to 18 dB. *5 When the LCD is in the gain adjustment mode ([GAIN] button: A UT O) Selec[...]

36 Basic operations (continued) p q Procedure f or camera menu operation (A W ‑RP655) 1 Press one of the [1] to [5] buttons of [CONTROL/PREVIEW MONIT OR OUT SEL] to select the unit which is to be operated. 2 Press the [MENU] button to set the LCD panel display to the men u mode . 3 T urn the jog dial (main) until CAMERA SETTING appears, [...]

37 Basic operations (continued) p w Contr ol ex er cised from the Multi Hybrid Contr ol P anel A W ‑RP555 This is used to switch between the Day mode and Night mode. For switching the SCENE file (FullAuto, Manual1 to 3). For operating the camera menus. MENU: This operates in the same wa y as MENU on the camera. ITEM: This operates in the same wa [...]

38 Basic operations (continued) p q Procedure f or camera menu operation (A W ‑RP555) 1 Press one of the [1] to [5] buttons of [CONTROL] to select the unit whic h is to be operated. 2 Press the [MENU] button of the A W ‑RP555 for 2 seconds. The camera menu of the A W-HE60 is displa y ed on the monitor . 3 P erform one of the f ollowing[...]

39 Basic operations (continued) p w Contr ol ex er cised from the Remote Camera Contr oller A W ‑RP50 POWER ALARM F1 CAMERA OSD R/B GAIN R/B PED SYSTEM SETUP CAMERA SCENE/MODE DETAIL DELETE STORE PAGE MENU F2 EXIT USER2 USER1 PT ACTIVE AUTO IRIS AUTO HI LOW PTZ/FOCUS SPEED FOCUS/PUSH OAF TELE ZOOM WIDE CAMERA STATUS / SELECTION PRESET MEMORY / ME[...]

40 Camera menu items p w Setting the camera menu items When the unit’ s settings are to be selected, the camera menus are displa yed on the monitor . The monitor is connected to the video signal output connector . The basic camera menu oper ations inv olve displa ying sub-menus from the T op Menu items, and selecting settings on the sub-menus. So[...]

41 Camera menu items (continued) p w Camera screen (when FullA uto is selected) This menu is used f or the camera image settings. Camera Scene FullAuto Contrast Level 0 Day/Night Day Return Scene [FullA uto, Manual1, Manual2, Manual3] Selected here is the shooting mode that matches the shooting situation. Select the mode which best suits the pre va[...]

42 Camera menu items (continued) p w Contrast screen Contrast Contrast Mode Auto Contrast Level 0 Shutter Mode ---- Step/Synchro ---- Frame Mix ---- AutoF.Mix Max Gain 0dB Gain Auto AGC Max Gain 18dB Return Contrast Mode [A uto, Manual] This item is used to select whether the image brightness (contrast) is to be controlled automatically or manually[...]

43 Camera menu items (continued) p w Picture 1/2 screen Picture 1/2 Chroma Level 0 AWB Mode AWB A R Gain 0 B Gain 0 Detail High Flesh Tone Mode Off DNR High Return Chroma Le vel [–3 to +3] Set here is the color intensity (chroma le vel) of the images. A WB Mode [A TW , A WB A, A WB B] The white balance mode is selected here. Select the mode when [...]

44 Camera menu items (continued) p w Picture 2/2 screen Picture 2/2 Pedestal 0 DRS Off Gamma Type Normal Gamma Level Mid Back Light COMP. Off Day/Night Day Return P edestal [–10 to +10] This item is used to adjust the blac k le vel (adjust the pedestal) so that the dark par ts of the images are easier to see. These par ts become darker when a neg[...]

45 Camera menu items (continued) p w 16‑axis color matrix (These operations can be performed only when Manual1 to 3 has been selected as the Scene setting.) <Color Matrix 1/3 screen> Color Matrix 1/3 Matrix Select Normal [Saturation] [Phase] Axis01 ---- ---- Axis02 ---- ---- Axis03 ---- ---- Axis04 ---- ---- Axis05 ---- ---- Axis06 ---- ---[...]

46 Camera menu items (continued) p w System screen This menu has items that relate to the genloc k phase adjustment and camera’ s output image settings . System Genlock Output Other Return Genlock (A W ‑HE60S only) This displa ys the Genlock screen on which to perf orm the phase adjustments. With the A W -HE60H, this item cannot be selected. Ou[...]

47 Camera menu items (continued) p w Output screen Output Format 1080i Down CONV. Mode LetterBox HDMI Color YCbCr422 Return Format [1080/59.94p, 1080/59.94i, 720/59.94p, 480/59.94p, 480/59.94i, 1080/29.97PsF , 1080/50p, 1080/50i, 720/50p, 576/50p, 576/50i, 1080/25PsF] The video f or mat is changed on this screen. The f or mats of the images which c[...]

48 Camera menu items (continued) p q Changing the format When the f or mat is changed on the Output screen from its current setting, the F or mat change check screen appears . Format change chec k screen Format Do you want to set Format(1080/59.94i)? CANCEL O.K.  The f or mat to be set is displa yed within the parentheses on the screen. Field fr[...]

49 Camera menu items (continued) p w Other 1/2 screen Other 1/2 Install Position Desktop Preset Speed 10 Preset Scope Mode A Digital Zoom Disable Speed With Zoom POS. On Focus Mode Auto Focus ADJ With PTZ. ---- Return Install P osition [Desktop, Hanging] “Desktop” or “Hanging” is selected here as the method used to install the unit. Desktop[...]

50 Camera menu items (continued) p w Other 2/2 screen Other 2/2 Tally Enable Enable OSD Mix SDI /COMP Off ByBrowser Browser/Video On OSD Off With Tally Off OSD Status Off Wireless Control Enable Return T ally Enab le [Disable, Enable] “Enable” or “Disab le” is set here for the function which turns on or tur ns off the tally lamp using the t[...]

51 Camera menu items (continued) p w Maintenance screen Maintenance Firmware Version IP Network Initialize Return Firmware V er sion This is selected to displa y the Fir mware V ersion screen on which to check the v ersion of the firmware used. IP Network This is selected to displa y the IP Network screen on which the user can check the IP Address [...]

52 Camera menu items (continued) p w IP Netw ork screen IP Network IP Address 192.168. 0. 10 Subnet Mask 255.255.255. 0 Default Gateway 192.168. 0. 1 Return IP Address This is selected to displa y the IP address which has been set f or the unit. Subnet Mask This is selected to displa y the subnet mask which has been set f or the unit. Default Gatew[...]

53 Camera menu item tab le Menu Item Factory setting Selection items FullAuto Man ual1 to 3 T op Menu Camera Scene Scene FullAuto FullA uto FullAuto , Manual1, Manual2, Manual3 Contrast Contrast Mode Auto Auto Auto , Manual Contrast Le vel 0 0 –5 to +5 Day/Night Day Day Day , Night Shutter Mode ---- ---- Off , Step , Synchro Step/Synchro ( When ?[...]

54 Menu Item Factory setting Selection items FullAuto Man ual1 to 3 T op Menu Camera Scene Picture Color Matrix 2/3 Axis 12 Saturation ---- 0 –127 to +127 Phase ---- 0 –127 to +127 Color Matrix 3/3 Matrix Select ---- EBU Normal, EBU, NTSC , User Axis 13 Saturation ---- 0 –127 to +127 Phase ---- 0 –127 to +127 Axis 14 Saturation ---- 0 –12[...]

55 Contr ols and settings fr om web screen With a personal computer connected to the unit, it is possible to view the camer a’ s IP videos or select various settings from the web browser screen. The LAN crossov er cable is used when connecting a personal computer directly to the unit’ s LAN connector f or IP control, and the LAN straight cab le[...]

56 Contr ols and settings fr om web screen (contin ued) p w Displa ying the web screen using a personal computer The procedure is e xplained here using Windows screens (Internet Explorer), but it is the same when using the Mac (Saf ari)* screens. *: There may be differences in some parts of the screen displays. 1 Start the web browser of the per[...]

57 Contr ols and settings fr om web screen (contin ued) p  If the personal computer does not hav e the plug-in view er software already installed, an installation confirmation message is displayed bef ore the Liv e screen is displa yed. In a case like this , follo w the on-screen instructions to install the software . F or fur ther details, ref [...]

58 Contr ols and settings fr om web screen (contin ued) p w Live screen: Single display mode When the button is pressed, the displa y s witches to the live screen on which the camer a images are display ed and the camera’ s panning, tilting, z ooming, focusing and other functions can be controlled.  Multi‑Screen list box (Multi‑screen) The[...]

59 Contr ols and settings fr om web screen (contin ued)  OSD Menu Operation Use this to select whether the camera’ s on-screen displa ys are to be shown. It cancels the selection of the setting which is being changed. It restores the pre-change setting. Use these to perf or m the menu operations . The items are selected using the , , and butto[...]

60 Contr ols and settings fr om web screen (contin ued)  Main area (IP video display area) The IP video of the connected camera will be displa yed. While the tally lamp is on, the area frame will turn red. When the tally lamp is off , the display area will return to normal. The camera image can be z oomed in and out by oper ating the mouse wheel[...]

61 Contr ols and settings fr om web screen (contin ued)  Zoom Use this to enable or disab le the digital zoom. Use this to adjust the zoom (magnification) to 1.0  . Use this to adjust the zoom (magnification) in the Wide direction. Use this to adjust the zoom (magnification) in the T ele direction.  Focus Use this to s witch between auto a[...]

62 Contr ols and settings fr om web screen (continued) The f ollowing functions are suppor ted by Windo ws only .  SnapShot This function acquires still images from the videos displa yed on the Liv e screen. This closes the SnapShot screen.  Full‑screen display This function enables the full-screen displa y of images displa yed on the Liv e[...]

63 Contr ols and settings fr om web screen (continued) p w Live screen: Multi display mode In this mode, the images of a multiple n umber of cameras can be monitored on one screen (called the ‘multi screen’). The image of 4 cameras or max. 16 cameras can be monitored at one time. In order to use the multi screen, the cameras whose images are to[...]

64 Contr ols and settings fr om web screen (continued) p w Setup screen The settings f or the unit are selected on this screen. p  The setting menu operations can be perf ormed only by users whose access le vel is “1. Administrator”. F or the procedure used to set the access lev el, ref er to page 84. p q Basic screen Press the button to s w[...]

65 Contr ols and settings fr om web screen (continued)  Basic button When the Basic button is pressed, the Basic screen is displa yed in the area on the right. Camera title [0 to 20 half‑size characters] <Initial setting: A W -HE60> Input the name of the camera here. When the Set button is clic ked, the input name appears in the camera t[...]

66 Contr ols and settings fr om web screen (continued) p q Image screen IP video settings (Video over IP) The JPEG image and H.264 image settings as well as the settings related to image quality are selected on this screen.  Video over IP Monitoring mode IP Select this when using the IP video output VIDEO Select this when using VIDEO OUT 16 : 9 [...]

67 Contr ols and settings fr om web screen (continued) JPEG image settings The image refresh inter v al (refresh speed), image capture size (resolution) and image quality is set here . F or the settings related to H.264 images, ref er to “H.264 image settings”. Refresh interval (JPEG)* [1fps, 2fps, 3fps, 5fps, 6fps, 10fps, 15fps*, 30fps*] <I[...]

68 Contr ols and settings fr om web screen (continued) Image capture size [QV GA, V GA] <Initial setting: V GA> QV GA or V GA is selected here as the H.264 image resolution. T ransmission priority [Constant bit rate, Frame rate] <Initial setting: Constant bit rate> The transmission mode of the H.264 images is set here. Constant bit rate[...]

69 Contr ols and settings fr om web screen (continued) T ransmission type [Unicast port (A UT O), Unicast port (MANU AL), Multicast] <Initial setting: Unicast por t (A UT O)> The transmission system f or the H.264 images is selected here. Unicast por t (A UT O) With this setting, up to 14 users can access one camera at the same time. When sen[...]

70 Contr ols and settings fr om web screen (continued) Image  Image Image adjust When the Setup button is clic ked, the Image adjust screen is displa yed. Preset position When the Setup button is clic ked, the Preset position setting screen is displa yed.[...]

71 Contr ols and settings fr om web screen (continued) Image adjust screen When Scene is set to “FullAuto” When Scene is set to “Manual1 to 3” Step、Synchro の 仕向地による違い[...]

72 Contr ols and settings fr om web screen (continued)  Scene [FullA uto, Manual1, Man ual2, Manual3] Selected here is the shooting mode that matches the shooting situation. Select the mode which best suits the pre vailing shooting conditions and the user’ s pref erences. FullA uto In this mode, the optimum settings and adjustments f or the sh[...]

73 Contr ols and settings fr om web screen (continued)  Picture Chroma Le vel [–3 to +3] Set here is the color intensity (chroma le vel) of the images. A WB This is used to e xecute automatic white balance (A WB) to set the white balance. F or details, ref er to page 23. A WB Mode [A TW , A WB A, A WB B] The white balance mode is selected here[...]

74 Contr ols and settings fr om web screen (continued) Back Light COMP . [Off, On] “On” or “Off ” is set here f or the backlight compensation function. Under backlight conditions , the function prev ents darkening as a result of light striking the backs of subjects, and makes it possib le to shoot images in shade or shado w more brightly . [...]

75 Contr ols and settings fr om web screen (continued) User Color Matrix Setup screen The User Color Matrix Setup screen is display ed when “User” is selected as the “Color Matrix” setting on the Image adjust screen and the Setup button is clic ked. Axis 01 to Axis 16: Saturation [–127 to +127] The saturation of Axis 01 to Axis 16 can be [...]

76 Contr ols and settings fr om web screen (continued) Preset position setting screen  Preset This selects the preset position to be operated from the pull-down men u. This is used to register the current status in the preset position now selected on the pull-down menu. It does not function if “Home” has been selected on the pull-down menu. [...]

77 Contr ols and settings fr om web screen (continued)  Brightness Use this to make the image darker . It does not work during automatic adjustments. Use this to make the image lighter . It does not work during automatic adjustments. Use this to s witch the picture brightness adjustment between auto and manual.  Control pad and its buttons T [...]

78 Contr ols and settings fr om web screen (continued)  Preset Setting Preset Speed [1 to 30] There are 30 preset pan-tilt operation speeds when regenerating the camera direction and other inf ormation which are registered in the preset memor y . p  If a high value is selected f or the Preset Speed setting, the image on the screen ma y shake [...]

79 Contr ols and settings fr om web screen (continued) System screen This menu has items that relate to the genloc k phase adjustment and camera’ s output image settings.  Genlock (A W‑HE60S onl y) Horizontal Phase [–206 to +49] This is used to adjust the horizontal phase during genlock. Subcarrier Phase Coarse [0 ° to 315 ° ] This is us[...]

80 Contr ols and settings fr om web screen (continued)  Output This item’ s setting is reflected when the Set b utton is pressed. Format [1080/59.94p, 1080/59.94i, 720/59.94p, 480/59.94p, 480/59.94i, 1080/29.97PsF , 1080/50p, 1080/50i, 720/50p, 576/50p, 576/50i, 1080/25PsF] The video f or mat is changed on this screen. The f or mats of the ima[...]

81 Contr ols and settings fr om web screen (continued)  Other This item’ s setting is reflected when the Set b utton is pressed. Install P osition [Desktop, Hanging] “Desktop” or “Hanging” is selected here as the method used to install the unit. Desktop Stand-alone installation Hanging Suspended installation  When “Hanging” has [...]

82 Contr ols and settings fr om web screen (continued) OSD Mix Whether the camera menus , statuses and other displays are to be turned Off or On can be selected here for each output picture. SDI(HDMI)/COMP [Off, On, Off ByBrowser] Bro wser/Video [Off, On] Off The camera menus and statuses are not displa yed on the output pictures targeted b y the s[...]

83 Contr ols and settings fr om web screen (continued) p q Multi‑screen The cameras whose images are to be displa yed on the m ulti screen are set here. Multi‑screen setup  IP address [1 to 128 half‑size characters] <Initial setting: b lank> Input here the IP address of the camera whose images are to be displa yed on the multi screen[...]

84 Contr ols and settings fr om web screen (continued) p q User mng. The authorization of those users who can access the camera from a personal computer or A W -RP50 and those IP addresses, from which the camera can be accessed, is registered on this screen in order to restrict any other access. The screen itself consists of three tabs, “User aut[...]

85 Contr ols and settings fr om web screen (continued) Host auth. screen  Host auth. <Initial setting: Off> Host authorization is set to “On” or “Off ” here .  IP address <Initial setting: b lank> The IP address of the personal computer from which access to the camera is allow ed is input here. The host name cannot be inpu[...]

86 Contr ols and settings fr om web screen (continued) Priority stream Selected on this screen are the settings f or the prior ity stream which enables the images to be sent with no reduction in image quality or image refresh speed e ven when a multiple n umber of users are accessing the unit at the same time.  Priority stream Activation <Ini[...]

87 Contr ols and settings fr om web screen (continued) p q Server This screen has items that relate to the NTP ser v er addresses, por t numbers and other NTP server settings. NTP screen  Time adjustment <Initial setting: Off> Select one of the f ollowing settings as the time adjustment method. The time is adjusted by the method selected h[...]

88 Contr ols and settings fr om web screen (continued) p q Network This screen has items that relate to the network settings and SNMP (Simple Network Management Protocol). It consists of the two tabs of “Network” and “SNMP”. Network screen  IP network DHCP <Initial setting: Off> Whether the DHCP function is to be used is set by sel[...]

89 Contr ols and settings fr om web screen (continued) Subnet mask <Initial setting: 255.255.255.0> Input the unit’ s subnet mask here if the DHCP function is not going to be used. Default gatewa y <Initial setting: 192.168.0.1> Input the unit’ s def ault gatew ay if the DHCP function is not going to be used. p  Multiple IP addre[...]

90 Contr ols and settings fr om web screen (continued) SNMP screen The settings related to the SNMP function are selected on this screen. When the SNMP manager is used f or the connection, the unit’ s statuses can be check ed. When the SNMP function is to be used, consult with your netw ork administrator .  Community [0 to 32 half‑size chara[...]

91 Contr ols and settings fr om web screen (continued) p q Maintenance Among the various maintenance operations perf ormed on this screen are system log checks, system v ersion upgrading and initialization of the unit. The screen itself consists of f our tabs: “System log”, “Product inf o . ”, “Def ault reset” and “Back up”. System [...]

92 Contr ols and settings fr om web screen (continued) Product inf o. screen The versions of the unit’ s software can be check ed on this screen. The “Model no . ”, “MAC address”, “Serial no . ”, “Firmware version” and other inf ormation about the unit is display ed.  Model no. The unit’ s model number is displa y ed here. ?[...]

93 Contr ols and settings fr om web screen (continued)  Viewer software installation counter The number of plug-in vie wer software applications which hav e been installed automatically from the unit is displa yed b y this counter .  Firmware file 1 After consulting with y our dealer , do wnload the latest software to the hard disk of y ou[...]

94 Contr ols and settings fr om web screen (continued) Default reset screen The unit’ s setting data is initialized and the unit is restarted on this screen.  Reset to the default (Except the network settings) When the Ex ecute button is clic ked, the unit’ s settings are returned to their defaults. The f ollowing settings are not initialize[...]

95 Contr ols and settings fr om web screen (continued) Back up screen On this screen, the unit’ s settings can be sa ved to a personal computer or settings sa ved in a personal computer can be loaded into the unit f or use.  Download The unit’ s settings are sa ved in the personal computer . After displa ying the sav e destination dialog box[...]

96 Contr ols and settings fr om web screen (continued) p w Displa ying the web screen using a mobile terminal Connect the mobile terminal to the unit, and display the unit’ s images (MJPEG f or mat only). Refreshing to the latest images takes place automatically . Operations such as panning, tilting and zooming can also be perf or med from the mo[...]

97 Contr ols and settings fr om web screen (continued)  Preset When this button is pressed, the b uttons f or selecting the preset positions are displa yed on the screen. When one of the displa yed b uttons is pressed, the camera’ s pan/tilt position mo ves to the preset position that was registered ahead of time. The settings that are reprodu[...]

98 Contr ols and settings fr om web screen (continued)  Iris When this button is pressed, the b uttons f or performing the iris operations are display ed on the screen. This s witches the iris between auto and manual. At the auto setting, the button label is g reen. This adjusts the mov ement of the iris in the “close” direction. This adjust[...]

99 Contr ols and settings fr om web screen (continued)  Camera menu (OSD menu) operation When this button is pressed, the b uttons f or performing the camera menu oper ations are display ed on the screen. At the same time, the camera men us are display ed on the unit’ s images. The unit’ s camera men u operations can be perf or med by pressi[...]

100 System log displa ys NTP‑related error displa ys Category Display Description of error Connection error No response from the NTP ser v er . p  The IP address of the ser v er may be incorrect. Check the server’ s IP address settings again. p  The NTP ser v er may be do wn. Consult your server administrator . Internal error Undefined er[...]

101 Limiter s This unit comes with settings (ref erred to as “limiters”) that restrict the panning and tilting movement r anges. Depending on where the unit has been installed, a subject which the user does not wish to be shot ma y be present in the mov ement ranges. In a case like this , the unit’ s shooting range can be limited by setting t[...]

102 Setting/releasing the limiter s p w Basic limiter operations 1 Press the [MENU] button. T ap the button (r ather than pressing it). When it is pressed f or 2 seconds, the camera menu will appear . If this happens, press the [MENU] b utton again for 2 seconds to clear the camera menu. Then star t again from step 1 . 2 Press the [  ], [ [...]

103 Setting/releasing the limiters (contin ued) p w Releasing the limiters The limiter positions that are set can be released by f ollowing the steps below . When the position is released, the tally lamp blinks twice . 1 Press one of the [CAM1] to [CAM4] buttons to select the unit. 2 Release the limiters b y taking the steps below . p  Rel[...]

104 Safe mode p w Concerning the safe mode The unit is equipped with a saf e mode for protection from damage. When a saf e mode is established, some or all of operations will no longer be accepted. T roub le‑triggered safe mode When the unit has detected trouble , the “troub le-triggered saf e mode” is established: In this mode , the unit’ [...]

105 Notes on Windows ® 7 When using Microsoft ® Windows ® 7, symptoms described in this document ma y happen. If any of them occurred, f ollow the instructions to solv e each problem. This document describes solutions for administrators .  If necessar y , install the viewer softw are. Ref er to the Operating Instructions of each device f or d[...]

106 Notes on Windows ® 7 (continued) p w Precautions when using Windo ws 7 Symptom 1 p  When accessing the web browser , the follo wing message is display ed on the inf or mation bar . “P op-up b lock ed. T o see this pop-up or additional options click here…” Solution Add the IP address of the product to “T rusted sites”, and perform [...]

107 Notes on Windows ® 7 (continued) Symptom 2 p  Easy IP Setup Software does not displa y the detected IP address. Solution Check the fire wall settings . If a fire wall is activ ated, set the web browser or Easy IP Setup Softw are to the “Allo w a program through Windows Fire wall” setting. 1 Open the control panel, and clic k “Syste[...]

108 Notes on Windows ® 7 (continued) Symptom 4 p  The screens of the administrator console or the windows of the bro wser are not displa yed properly . (Refer to the screenshot.) Solution Check the char acter size of the screenshot by clic king “ Display ” of “ P ersonaliz e ”. If the character size is set to “ Larger scale ”, set i[...]

109 Notes on Windows ® 7 (continued) Symptom 5 p  Screen is def or med. / When activ ating the compatibility view , par t of the screen is not display ed or a pop-up window appears to sa y that the screen is not display ed again. Solution Check “Displa y all websites in Compatibility Vie w” on the “Compatibility View Settings” windo w .[...]

110 Notes on Windows ® 7 (continued) Symptom 8 p  Software upgr ade is impossible e v en when selecting a file from the dialog box displa y ed from the window or tab to upgrade the software . Solution P erf orm the custom lev el setting on the “Security Settings” window . 1 Star t up the web bro wser , and click “T ools” on the menu [...]

111 未更新 Inde x p x A M M Access inter val .................................................... 71 M M Access lev el .................................................. 66, 67 M M AGC Max Gain .............................................. 40, 59 M M AutoF . Mix Max Gain ..................................... 40, 59 A utomatic adjustment (A WB) [...]

112 未更新 Index (contin ued) p x N Network ............................................................... 69 Network screen ................................................... 69 M M No ....................................................................... 73 M M NTP por t ............................................................. 68 NTP s[...]

113 Memo[...]

Web Site: http://panasonic.net © Panasonic Corporation 2012[...]