Panasonic BT-LH900A инструкция обслуживания

P Model No. BT - E LCD Video Monitor Operating Instructions VQT0X58-1 S0306W1106 -F @ Printed in Japan ENGLISH Before operating this product, please read the instructions carefully and save this manual for future use.[...]

2 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dan[...]

3 O Batteries are used for the main power source. At the end of their useful life, you should not throw them away. Instead, hand them in as small chemical waste. O Voor de primaire voeding en het reservegeheugen. Wanneer de batterij is uitgeput, mag u deze niet gewoon weggooien, maar dient u deze als klein chemisch afval weg te doen. Attention/Atte[...]

4 Precautions for use . . . . . . . . . . . . . . . . . . 4 Standard accessory . . . . . . . . . . . . . . . . . . 4 Optional unit . . . . . . . . . . . . . . . . . . . . . . . 4 Introduction . . . . . . . . . . . . . . . . . . . . . . . . 5 P arts and their functions . . . . . . . . . . . . . 6 Relocating the main controls . . . . . . . . . . 9 Su[...]

5 150 158 18 2 3 38 142 2-M3 218 46.5 65 65 38 4-M3 20.2 181 2-M3 142 38 142 181 Intr oduction Designed for use in broadcasting and commercial applications, the model BT-LH900A is a slim-line and lightweight liquid crystal video monitor with an 8.4-type liquid crystal screen. For use, secure it in place by, for instance, installing it in a rack by [...]

6 4 BLUE/ W W button This button is used to move the cursor or change settings while a menu is displayed. If there is no menu display, it turns the blue-only function ON or OFF. When this function is set to ON, only the blue components among the RGB components are displayed. HD ZOOM T ally lamps In the above illustration, the R (red) tally lamp is [...]

7 4 Image controls These controls are used to adjust the peaking/color phase, chroma, brightness and contrast. When a control is pushed in, it pops out to enable adjustment. When a numerical value is changed from the default setting, the lamp to the left of the control lights. The adjustments performed using these controls are valid only when the c[...]

8 P arts and their functions (continued) VIDEO OUT connector The video signals are output from this connector. Signals are passed through the : VIDEO IN connector and output from this connector. ; < SDI input connectors The SDI input signals are supplied to these connectors which support automatic HD/SD switching. = SDI output connector The SDI [...]

9 Relocating the main contr ols The main controls can be relocated to the bottom surface or right panel of the monitor depending on such factors as where and how the monitor will be used. <Note> Before relocating the main control, make absolutely sure that the power has been turned off. 1 Disconnect the cord connecting the main controls to th[...]

10 Suppl ying the po wer An Anton/Bauer or V-mount type of battery pack or an external DC power supply can be used to power this monitor. 1 Install the Anton/Bauer type of battery pack. Battery pack 1 Remove the battery holder. Battery holder 2 Install the accessory metal battery mount. Metal battery mount 3 Fix the V-mount type battery holder with[...]

11 Supplying the po wer (continued) Cosmetic scre ws A total of eight cosmetic screws are provided with the monitor for use at such times when the main controls have been relocated. (Refer to page 9) Since these screws also serve to protect the internal mechanisms, do not leave the screw holes empty but place the screws inside them and tighten them[...]

12 Ho w to use the on-screen menus Four kinds of information — menus, status displays, image control settings and battery voltage — can be displayed on the screen. Menu displa y This display appears when the MENU/EXIT button is pressed. If no further action is taken for the next 120 seconds, the display will be automatically cleared. The positi[...]

13 How to use the on-screen men us (continued) Battery v oltage displa y Concerning the signal f ormats The battery voltage information is displayed all the time when ON has been selected as the BATTERY REMAIN item setting on the OSD screen of the main menu. It indicates the voltage level of the battery. If an Anton/Bauer digital battery is being u[...]

14 Menu operations Menu operations MENU/EXIT button Use the HD ZOOM/ X button and BLUE/ W button to move the cursor, and select the desired menu using the FUNCTION/ENTER button. 1 2 When the MENU/EXIT button is pressed, the main menu appears on the screen. [ M A I N ] M A R K E R 4 V I D E O C O N F I G 4 S Y S T E M C O N F I G 4 O S D C O N F I G[...]

15 User data This monitor enables the menu settings and screen values which have been adjusted by the image controls to be saved in five user data files which can then be loaded as required. The following data can be saved and loaded as user data files: ≥ All menu settings (including the function settings of the buttons at the front of the monito[...]

16 MAIN MENU Menu configuration MARKER MARKER SELECT MARKER 16:9 MARKER 4:3 GAMMA SELECT SHARPNESS H SHARPNESS V BATTERY REMAIN STATUS DISPLAY CRCC MESSAGE MENU POSITION STATUS POSITION ROTARY POSITION COLOR TEMP. SHARPNESS MODE CONTROL LOCAL ENA BACKLIGHT TIME SD ASPECT I-P MODE MONO BACKLIGHT FUNCTION WFM HD ZOOM PEAKING/PHASE USER MODE LOAD GPI1[...]

17 MAIN MENU (continued) The underlined setting indicates the factory setting mode. Item Setting Description Item Setting Description MARKER SELECT MENU GPI For setting whether the marker display settings are to be performed using the menu or from the GPI connector. MENU : The operations are performed using the menu. Operations from the GPI connect[...]

18 MAIN MENU (continued) T ypes of marker s 4:3 markers 13:9 markers 14:9 markers 95% area markers 93% area markers 90% area markers 80% area markers 95% area markers 93% area markers 90% area markers 88% area markers 80% area markers 4:3 markers (These appear when SD signals with a 4:3 aspect ratio are supplied.) Dotted lines are displayed as the [...]

19 MAIN MENU (continued) The underlined setting indicates the factory setting mode. Item Setting Description Item Setting Description GAMMA SELECT GPI NORMAL FILM For setting the gamma mode. GPI: This is the GPI setting. For details, refer to “ REMOTE specifications ” (page 23). NORMAL : The normal gamma mode is established. FILM: The film mode[...]

20 Item Setting Description GPI1-8 UNDEF MARKER1 ON/OFF MARKER2 ON/OFF MARKER BACK HALF MARKER BACK BLACK CENTER MARKER INPUT SEL. SDI1 INPUT SEL. SDI2 INPUT SEL. VIDEO INPUT SEL. YPBPR/RGB SD ASPECT HD ZOOM BACKLIGHT MIN. R.TALLY G.TALLY MONO ON/OFF GAMMA SELECT WFM ON/OFF For allocating particular functions to particular pins when remote control [...]

21 MAIN MENU (continued) INPUT SELECT Item Setting Description SDI1 * 1 OFF ON For setting whether the SDI 1 signals can be selected when the channels are to be switched using the INPUT button. OFF: The SDI 1 signals cannot be selected. ON: The SDI 1 signals can be selected. FORMAT AUTO 1080/60I 1080/50I 1080/30P 1080/25P 1080/24P 1080/24PsF 1035/6[...]

22 CONTR OL Item Setting Description CONTROL LOCAL REMOTE For selecting where the operations are to be initiated. LOCAL : Only operations initiated from the main controls can be performed. Remote control operations cannot be performed. REMOTE : Remote control operations can be performed, but no operations initiated by the main controls can be perfo[...]

23 List of functions allocated The function which can be allocated to the pins are listed below. REMO TE specifications Pin no. 1 2 3 4 5 6 7 8 9 Signal GPI1 GPI2 GPI3 GPI4 GND GPI5 GPI6 GPI7 GPI8 5 4 3 2 1 9 8 7 6 Connector (9P) This monitor can be operated by remote control using the GPI connector and RS-232C connector. The GPI connector takes pr[...]

24 REMO TE specifications (continued) RS-232C connector For the RS-232C connector pin layout and connections, refer to the figure below and tables on the right. <Note> The RS-232C remote control specifications of this BT- LH900A are not compatible with those of the conventional BT-LH900. If you wish to remotely control the BT-LH900A by using [...]

25 $ Setting command No. Command Explanation Data Response 1 IIS Input switch 0: SDI1 1: SDI2 2: VIDEO 3: YP B P R /RGB IIS 7 OMO Monochrome settings 1: OFF 2: ON OMO 8 DBR Remaining battery charge display 0: OFF 1: ON DBR Sharpness settings SHP0: LOW SHP1: HIGH SHH00-30: Horizontal sharpness settings SHV00-30: Vertical sharpness settings 15 IRF RG[...]

No. Command Explanation Data Response 26 REMO TE specifications (continued) 23 MLE Remote operation settings 0: DISENABLE 1: INPUT MLE 22 MCO Remote settings 0: LOCAL 1: REMOTE MCO 21 MAS SD aspect settings 0: 16:9 1: 4:3 MAS 20 MIP IP mode settings 0: MODE1 1: MODE2 MIP 19 MCT Color temperature settings 00: D56 01: D65 02: D93 10-73: USER0-63 MCT [...]

No. Command Explanation Data Response 27 12 QAS Aspect 0: 16:9 1: 4:3 O Outputs the aspect mode of the images now displayed on the screen. 13 QSF Format settings SD1 : SDI1 00: AUTO 01: 1080/60I 03: 1080/50I 04: 1080/30P 06: 1080/25P 07: 1080/24P 09: 1080/24PsF 11: 1035/60I 13: 720/60P 15: 720/60P ANAMO 17: 576/50I 19: 480/60I 23: 720/50P SD2 : SDI[...]

28 Maintenance and inspections ≥ Wipe off any dust or dirt on the monitor and LCD panel with a soft cloth. For stubborn dirt or stains, wipe the monitor and LCD panel with a cloth that has been lightly dampened with well-diluted kitchen detergent and wrung out thoroughly, then finish it off with a dry cloth. The monitor may malfunction if even on[...]

29 Specifications indicates safety information. Dimensions (W a H a D): 218 mm a 176 mm a 65 mm (8 5 / 8 inches a 6 15 / 16 inches a 2 9 / 16 inches) (When the main controls have been installed at the bottom of the monitor) Weight: 2.0 kg (4.4 lb) (main unit only) Ambient operating temperature: 0 ° C to 40 ° C (32 ° F to 104 ° F) Ambient operat[...]

30 Memo[...]

31 Memo[...]

P E Information on Disposal f or User s of W aste Electrical & Electr onic Equipment (private households) This symbol on the products and/or accompanying documents means that used electrical and electronic products should not be mixed with general household waste. For proper treatment, recovery and recycling, please take these products to desig[...]