Panasonic BT-LS1400P инструкция обслуживания

Before attempting to connect, operate or adjust this product, please read these instructions completely. BT -LS1400 P Liquid Crystal Video Monitor POWER INPUT SCAN BLUE MENU/ EXIT ENTER MEN U VOLUME Printed in Japan VQT0F29[...]

2 indicates safety information. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the [...]

3 indicates safety information. CAUTION: THE SOCKET-OUTLET SHALL BE INSTALLED NEAR THE EQUIPMENT AND SHALL BE EASILY ACCESSIBLE. ∫ THIS APPARATUS MUST BE GROUNDED To ensure safe operation the three-pin plug must be inserted only into a standard three-pin power outlet which is effectively grounded through normal house- hold wiring. Extension cords[...]

4 This product has been specially designed for commercial use. As such, it should be used and operated only by persons with related expertise. ¥ ¥ The liquid crystal parts are fabricated using high-precision technology. The screen has effective pixels that cover more than 99.99% of its area, but pixels may be missing or remain permanently lighted[...]

5 Power switch This is the main power switch. When the power is ON, the LED (green) above the switch lights. 1 2 INPUT selector button This is used to select the signal input, and each time it is pressed, the input is switched in the following sequence: LINE A > LINE B > CMPNT > SDI > LINE A. <Note> The SDI signal input can be sel[...]

6 Parts and their functions (rear panel) REMOTE connector This 9-pin, D-sub connector is for remote control purposes. < = SD-SDI connectors (optional) These are SD-SDI input connectors (BNC) with active thru output. > AC IN power socket This is the AC power socket. Connect the accessory power cord here. @ Screw hole for cable clamp This screw[...]

7 How to use the on-screen menus Press the MENU/EXIT button to display the main menu on the screen. PICTURE This menu is used to perform the settings relating to the picture. 1 2 VIDEO CONFIG This menu is used to perform aspect and component input level settings. 5 [INPUT] The currently selected signal—whether LINE A, LINE B, CMPNT or SDI (option[...]

8 [PICTURE MENU] MODE BROADCAST CONTRAST 60 BRIGHT 30 CHROMA 30 PHASE 30 SHARPNESS 30 AI OFF NR OFF COLOR TEMP D93 3D Y/C OFF [LORD FACTORY] MODE The video mode is selected here. ≥ BROADCAST This mode is set at the factory to best suit broadcast operations. ≥ GENERAL This mode applies the dynamic settings which were set at the factory for gener[...]

9 [SYSTEM CONFIG] BACKLIGHT 60 STATUS DISPLAY CONTINUE [INPUT SELECT] LINE B ON CMPNT ON SDI ON REMOTE OFF BACKLIGHT The backlight brightness is adjusted to a value from 0 to 60 here. 60 is the factory setting. STATUS DISPLAY The information displays during input switching and input signal system display are set here. ≥ CONTINUE The information r[...]

10 REMOTE specifications Pin No. 1 2 3 4 5 6 7 8 9 Signal Input switching function Aspect ratio switching function Standby function Tally function GND s s s s 54321 9 8 7 6 Connector (9P) In order to perform REMOTE operations, select ON as the setting for the REMOTE menu item on the SYSTEM CONFIG menu. The functions for REMOTE operations can be swi[...]

11 Rack mounting The unit can be mounted into a 19-inch standard rack (height: 7U size) if the optional rack-mounting adaptors (BT-MA1400G) are used. Refer to the following when attaching the adaptors. 2 Remove the six screws from the monitor. 3 Attach the BT-MA1400G rack mount adapter using the two screws which were removed in step 1 and six screw[...]

12 Maintenance ≥ ≥ Wipe off any dust or dirt on the monitor and LCD panel with a soft cloth. For stubborn dirt or stains, wipe the monitor and LCD panel with a cloth that has been lightly dampened with well-diluted kitchen detergent and wrung out thoroughly, then finish it off with a dry cloth. The monitor may malfunction if even one drop of wa[...]

13 Specifications Power supply: AC 100 V to 240 V, 50-60 Hz Power consumption : 0.98 A to 0.54 A indicates safety information. Dimensions (W a a H a a D): 14 a 12-1/8 a 2-13/16 inch (main unit only) (356 a 308.5 a 71.5 mm) 14 a 13-3/8 a 7-3/8 inch (with monitor stand) (356 a 340 a 187 mm) Weight: 10.5 lbs (4.6 kg) (main unit only) 12.4 lbs (5.6 kg)[...]

14 Memo[...]

15 Memo[...]

PANASONIC BROADCAST & TELEVISION SYSTEMS COMPANY UNIT COMPANY OF MATSUSHITA ELECTRIC CORPORATION OF AMERICA Executive Office: One Panasonic Way 4E-7, Secaucus, NJ 07094 (201) 348-7000 EASTERN ZONE: One Panasonic Way 4E-7, Secaucus, NJ 07094 (201) 348-7621 Southeast Region: 1225 Northbrook Parkway, Ste 1-160, Suwanee, GA 30024 (770) 338-6835 Cen[...]