Panasonic KX-TDA100 инструкция обслуживания

KX-TD A100 Model KX-TD A200 Thank you f or purchasing a P anasonic Hybr id IP-PBX. Please read this manual carefully bef ore using this product and sav e this manual f or future use. KX-TD A100/KX-TD A200: PMPR Software File V ersion 3.0000 or later Hybrid IP-PBX Installation Manual SD Logo is a trademark.[...]

2 Installation Manual System Components System Components T able Category Model No. Description Shelves K X-TDA100 Basic Shelf KX-TDA200 Basic Shel f Main Processing Card Main Pr ocessi ng Card (M PR) MPR Option C ard KX-TDA0105 Mem or y Expa nsion Card (M EC) KX-TDA0196 Remote Card (RMT) CO Line Cards KX-T DA 0180 8-P or t Anal og T runk C ard (LC[...]

Installation Manual 3 A vailable Pr oprietary T elephones The Hy brid IP-PBX supp or ts all of th e P a nasoni c KX- T7000, K X-TD70 00, and KX-NT se r ies: • Digital/A nalog /IP propr ieta r y tel ephone s (e.g., KX-T 7625, K X-T7630, KX-T7 633, KX -T763 6, KX- NT136) • P or table statio ns (e.g., KX -TD7690 ) • DSS con soles (e.g. , KX-T764[...]

4 Installation Manual Impor tant Noti ce Pr ior to c onnectio n of this produc t, ple ase verif y that the i ntende d operating environment i s su ppor ted. Satisfactor y performan ce ca nnot be guarante ed for the following: – interop erability and comp atibil ity wi th all devices an d syste ms co nnecte d to thi s produ ct – proper operation[...]

Installation Manual 5 Impor tant Safety Instructions SAFETY REQUIREMENTS When us ing your tel ephone equi pment, basic s afety precautions should a lwa y s be follow e d to r educe the ri sk of fir e, electr ic shock and in jur y t o person s, inclu ding th e following: 1. Read and underst and al l instr uc tions. 2. F ol low all war nings a nd ins[...]

6 Installation Manual SA VE THESE INSTR UCTIONS[...]

Installation Manual 7 Precaution W ARNING DO NO T REMO VE SD MEMOR Y CARD WHILE PO WER IS SUPPLIED T O THE HYBRID . IP-PBX Doing so ma y cause the Hybrid IP-PBX to fail to star t when y ou tr y to restar t the system.[...]

8 Installation Manual • K ee p the un it awa y fro m heati ng applia nces and devices that ge nerate el ectr ical no ise suc h as fluores cent la mps, motors an d televisions. These no ise sour ces can inter f e re with th e performa nce of the Hybr id IP-PBX . • This unit sh ould be kept free of du st, mo isture, high temperat ure (mo re than [...]

Installation Manual 9 P assw ord Securit y W arning to the Administrator or Installer regarding the system pass wor d 1. Please provide all syste m pa ss wor ds to the custo mer . 2. T o av o id una uthor ized acce ss and possible abuse o f the PBX, keep the pas sw o rds se cret, and inform the custome r of th e impo r tanc e of th e passwords, and[...]

10 Installation Manual When y ou sh ip the pr oduct Careful ly pack and send it pr epai d, adequ ately in sure d and preferably in the or ig inal car ton. A ttach a postage -paid le tter , d etailing the symp tom, to th e outs ide of the car ton. DO NO T s end the pr oduct to the Executiv e or Re gional S ales o ffice s. They are NO T equip ped to [...]

Installation Manual 11 Intr oduction This Ins talla tion Ma nual is des igned to ser v e as an overall technic al re f e rence for the Panasonic Hyb r id IP- PBX, K X-TDA100/KX-TDA200. It provides instr ucti ons for installi ng the h ardware, and p rogramming t he Hybr id IP- PBX using the KX -TD A Maint enance Conso le. The Structure of thi s M an[...]

12 Installation Manual F .C.C. REQUIREMENTS AND RELEV ANT INFORMA TION 1. Notification to the T elephone Company This equ ipmen t complies with P ar t 68 of the FCC r ule s and the req uiremen ts adopt ed by the ACT A. On the side of this equip ment is a lab el that co ntains, am ong oth er in f o rm ation, a pro duct ident ifier in the f o rm at U[...]

Installation Manual 13 If your home ha s speci ally wire d alar m e quipm ent con necte d to the telepho ne line, ensu re the installa tion of thi s equipmen t does not di sable your alarm equipme nt. If you ha ve questions about what will disable ala r m eq uipme nt, consu lt your teleph one co mpany or a q ualifi ed inst alle r . Note This eq uip[...]

14 Installation Manual For Cell Station CA UTION Any changes or modi ficat ions not expressl y app rov ed by the par ty res ponsible for complianc e cou ld v o id use r's autho r ity to ope rate this device. Note This eq uipment h as bee n teste d and found to co mply wit h the limits f o r a Clas s B digi tal device, pursuan t to P ar t 1 5 o[...]

Installation Manual 15 T ab le of Contents 1 Syst em O utline ... ..... .... ..... ..... ..... ..... .... ........ .... ..... ..... ..... ..... .... ..... ..... ... 19 1.1 Syste m H ig hligh ts . ..... .... ..... .... .... ..... .... ..... ...... ..... .... .... ..... .... ..... .... ..... .... .... ....... .... ..... ... 2 0 1.1 .1 Sys tem H ighli[...]

16 Installation Manual 2.5.5 SLC8 Card (KX-TD A0173) ..... . ........ ............. . ....... .............. ............... .............. ............. . .... 96 2.5.6 EXT -CID Card (KX-TD A0168) ......... ............. ........... . ....... ........... ............ ........... . ....... ........ 98 2.5.7 SLC16 Card (KX-TD A0174) and MSLC16 Card [...]

Installation Manual 17 5.1 Revisio n His to ry. .... ..... .... ..... .... .... ..... .... ..... .... .... ....... .... ..... .... ..... .... ..... .... .... ..... .... ..... ... 186 5.1 .1 PMPR S oftwa re Fi le V ersion 1.1 xx x ... .... ..... .... .... ..... .... ..... .... ..... .... ....... .... .... ..... .... ..... ... 18 6 5.1 .2 PMPR S oftw[...]

18 Installation Manual[...]

Installation Manual 19 Section 1 System Outline This sec tion p rovides general informati on on the Hyb rid I P- PBX, includi ng the syst em cap acity an d spec ificati ons.[...]

1.1 System Highlights 20 Installation Manual 1.1 System Highlights 1.1.1 System Highlights Netw or king Features The Hy bri d IP-PBX s uppor ts the following pr ivate networ king features : TIE Line Service PBXs c an be con nected via p rivately leased t ele phone lin es for ming a private ne twork . These "TIE lines" provide a cos t-effe[...]

1.1 Syste m Highlights Installation Manual 21 Third- Party CTI A pplications The Hybr id IP- PBX sup por ts ind ustr y standa rd protoco ls, allowing thi rd-par ty CTI a pplicati ons to be integrated with the PB X and its extensions. V oice Mai l Features A V oice Proce ssing Sy stem (V PS) c an be connec ted to the Hybr id I P-PBX to provide V oic[...]

1.2 Basic Sy stem Construction 22 Installation Manual 1.2 Basic System Const ruction 1.2.1 Basic Shelf The bas ic shel f contains an MPR ca rd for controll ing the H ybr id IP- PBX. T o use the system, i nstal l a power supply unit (PSU ) in the P SU Sl ot and optiona l ser vice ca rds in the b asic s helf. Construction of the Basic Shelf KX-TDA100[...]

1.2 Basic Sy stem Construction Installation Manual 23 1.2.2 System C onnection Diagram Doorphone & Door Opener BGM/Music On Hold (MOH) Pager/ Speaker Voice Processing System KX-T7636/ KX-T7633 Remote PC PC Printer Router Private IP Network CO (Telephone Company) Lines Analog/PRI/T1 Hybrid IP-PBX SLT CS PS Wireless Phone Fax Machine PC USB APT D[...]

1.2 Basic Sy stem Construction 24 Installation Manual PS PC Radio Amplifier Pager/Speaker Doorphone & Door Opener SLT Wireless Phone Fax Machine Hybrid IP-PBX LAN Private IP Network Station Message Detail Recording (SMDR) PC Router T1 Line T1 Line (Digital CO Line) (Digital CO Line) T1 Line (Digital CO Line) DHLC8 (KX-TDA0170) CTI-LINK (KX-TDA0[...]

1.3 Optiona l Equipment Installation Manual 25 1.3 Optional Equipment 1.3. 1 Optio nal Equipme nt Model No. Model Name Description KX-TDA0103 L-T yp e P ower Supply Unit (PSU -L ) P ower Supply Uni t f o r KX-TDA200. T otal power output of 279 W . Safety Class 1 compli ant. KX-TDA0104 M-T yp e P ower Supp ly Uni t (PSU -M ) P ower Supply Unit for K[...]

1.3 Option al Equipment 26 Installation Manual Note F or the maximum number of o ptional se r vic e cards that can b e insta lled in the Hybri d IP-PBX, r efer to "1.4.3 Syst em Capaci ty". KX-TDA0181 16-P or t Analog T r unk Card (LCO T16) 16-por t analo g CO line card wi th 4 power failure transfer (PFT) ports. KX-TDA0187 T -1 T run k C[...]

1.4 Specific ations Installation Manual 27 1.4 Speci fications 1.4.1 Gen eral Description Control Bus Or igin al bus (16- bit, 8 M Hz, 10 megabytes p er s econd) Communic a tion Bus H.100 bus confor mity (1 024 time slot s) Switching Non-blocking P ower Input PSU-S 100 V AC to 130 V AC , 1.4 A/ 200 V AC to 240 V AC , 0.8 A , 50 Hz /60 Hz PSU- M 100[...]

1.4 Specific ations 28 Installation Manual Extension Connection Cable SL T 1-pair wire (T , R ) DPT 1-pair wire (D1, D2) or 2-pair wire ( T , R , D1, D2) APT 2-pair wir e (T , R , D1, D2) PT -interface CS 1-pair wire (D1, D2) DSS Conso le and Add-on K ey Modu le 1-pair wir e (D1, D2) Dimension KX-TD A100 334 mm (W ) × 390 mm (H) × 270 m m (D) (13[...]

1.4 Specific ations Installation Manual 29 1.4.2 Characteristics T erminal Equipment Loop Limit • PT: KX-T7600 ser ies DPT: 90 Ω ; all othe r DPTs /APTs : 40 Ω • SL T: 600 Ω includi ng set • Door ph one: 20 Ω • CS: 130 Ω ; PT -interface CS: 65 Ω Minimum Leakage Resistanc e 15 000 Ω minimum Maxim um Number of Extension Instrume[...]

1.4 Specific ations 30 Installation Manual 1.4.3 System Capacity Maxim um Optional Service Car ds Ther e are 2 ty pes of opt ion al ser vice ca rds for insta llation: • Cards i nstalle d in the slots o f the Hy brid IP-P BX • Cards m ounted on other optiona l ser vice cards Notes • Any card that exceeds the cap acity of the Hybr id IP- PBX wi[...]

1.4 Specific ations Installation Manual 31 The following numb er of opti onal s er vi ce car ds ca n be in stall ed in the var ious s lots of the Hy bri d IP-PB X. Card T y pe Maximum Number Installed in KX-TD A100 KX -TD A200 MPR 1 1 MPR Ca rd Slot CO Line C ard To t a l 6 *1 *1 When installing T1, PRI23, or IP-GW4 car ds, mak e sure that t he num[...]

1.4 Specific ations 32 Installation Manual Cards Mounted on Other Opt i onal Service Car ds The following number of option al ser vic e cards can b e mounte d on the spec ified oth er opti onal ser vi ce cards . Maxim um T erminal Equipment The following number of items of ter mi nal equip ment c an be s uppor ted by the Hybr id I P-PBX. F o r how [...]

1.4 Specific ations Installation Manual 33 MEC Car d Calculation Calcul ate the M EC figure fro m the type a nd total number of ite ms of e quipment to be con nected. If th e MEC figure e xc eeds 6 4 (for KX-TD A 100) or 128 ( f o r KX-TDA200), you need to instal l an M EC card . MEC Car d Calculation Calculation Exampl e (KX-TD A100) The tota l ME[...]

1.4 Specific ations 34 Installation Manual P o w er Supply Unit Selection Hybr id IP- PBX nee ds a power supp ly unit ( PSU) s uitable for its confi guration. Ca lculate t he load figure f rom the type and numbe r of item s of eq uipmen t to be c onnected , and de ter mine the typ e of PS U that will be requ ired. Load Figure Calculat ion PSU Capac[...]

1.4 Specific ations Installation Manual 35 Calculation Exampl e (KX-TD A200) The tota l load fi gure is 96. As this is be tween 6 4 and 128, you s hould install the PSU- M. Howe ver , if you expect e x pansion in the f uture, it m a y b e better to in stall the PSU- L. There i s no ha r m in i nstallin g a PS U that is larger than is requir ed for [...]

1.4 Specific ations 36 Installation Manual[...]

Installation Manual 37 Section 2 Installation Thi s secti on desc r ibes the pr ocedure s to i nstall the Hyb r id IP - PBX. Deta iled i nstr ucti ons for planning the in stallati on si te, insta lling th e shel v e s and option al s er vic e cards, a nd cabling of per ipheral e quipme nt are pr ovided. Fu r ther informa tion on system expansion an[...]

2.1 Bef ore Installation 38 Installation Manual 2.1 Bef ore Inst allation 2.1.1 Before Installation Pleas e read the f ol lowing notes co ncer ning inst allati on and co nnecti on before installi ng the Hy brid IP-PBX and t er minal equipmen t. Be sur e to comp ly wi th all app lica ble laws, regulatio ns, and guidel ines. Safety Ins talla tion Ins[...]

2.1 Bef ore Installation Installation Manual 39 3. A void using the sa me AC outlet for compu ters, telex es, and other offi ce eq uipmen t, as n oise generated by such equip ment may hamper system perform ance or inter rup t the sy stem. 4. Use 2-pai r teleph one ca bles when conn ecting P Ts. Use 1-pa ir te lephone c ables when conne cting SL Ts,[...]

2.2 Install ation of the Hybrid IP-PBX 40 Installation Manual 2.2 Insta llation of the Hybrid IP-PBX 2.2.1 Unpac kin g Unpack the box and check the i tems b elow: KX-TDA100 KX-TDA200 Main Unit 1 1 Metal Bra ck et 1 1 Scre w A 3 4 Scre w B (Blac k) 2 6 Ancho r Plug 3 4 Mini Pl ug (for pager and mus ic sourc e) 4 4 SD Me mor y Card 1 1[...]

2.2 Inst allation of the Hybrid IP-PBX Installation Manual 41 2.2.2 Names a nd Location s Inside V iew A. R UN Ind icator B. ALARM Indic ator C. USB P or t D. RS-232C P or t E. PSU Sl ot F. Null Slot (not available f or any option al ser vice car d) G. F ree Slo ts 1 to 6 (from the left ) H. MPR Card S lot I. F ree Slo ts 1 to 11 (from the le ft) K[...]

2.2 Install ation of the Hybrid IP-PBX 42 Installation Manual 2.2.3 Opening/Clo sing the Front Co ver Opening the Front Co ver 1. Inser t a flathe ad screwdr iver into th e opening (on th e left of the screw cover) and unla tch the screw cover . 2. T ur n the s crew counterclockwise to loosen . 3. Slide the front cov er to the r ight un til i t sto[...]

2.2 Inst allation of the Hybrid IP-PBX Installation Manual 43 Closing the Front Co ver 1. Hook the fr ont cover onto the she lf (lin e up the protr usi ons on the cover with the rec eptacle s on th e shelf). Then s lide the front cov er to the left un til it locks. 2. T ur n the s crew clockwise to tighten. 3. Secure the scre w cov er . Notes • F[...]

2.2 Install ation of the Hybrid IP-PBX 44 Installation Manual 2.2.4 Insta lling/Replacing the P ower Suppl y Unit Function Accessories and User -supplied Items Accessories (included): S c rews × 4, AC p ower co rd × 1 User-supplied (not incl ude d): Groundin g wire Note F or d etails ab out frame ground con nection, refer to "2.2.5 Fr am e G[...]

2.2 Inst allation of the Hybrid IP-PBX Installation Manual 45 4. T o pro tect the ba ck board from s tatic el ectr icity , do not tou ch par ts o n the ba ck board in the m ain unit and P SU . T o di scharg e stati c elec tric ity , touch ground or wear a gro unding strap . The f o llowing pr ocedures are for installing or replacing a PSU onl y . D[...]

2.2 Install ation of the Hybrid IP-PBX 46 Installation Manual 3. T ur n the 4 screws clockwise, in the order indi cated by the numb ers 1 to 4, to fix th e PSU. Replacing the P ower Suppl y Unit 1. Unplug the AC po wer cord. 2. T ur n the 4 screws counterc lockwise to loos en the m. Screws 1 3 2 4 Screws[...]

2.2 Inst allation of the Hybrid IP-PBX Installation Manual 47 3. Pull the re lease lev er in the dir ection of the ar row to disc onnect th e PSU from the ba ck board. 4. Replace th e PSU . 5. F ol low the ste ps in "Inst allin g the P ower Suppl y Unit". Release Lever Back Board Current PSU New PSU[...]

2.2 Install ation of the Hybrid IP-PBX 48 Installation Manual 2.2.5 Frame Ground Connection IMPOR T ANT Connect the frame of th e Hybrid IP-PBX to gr ound. • Be su re to c omply w ith app lica ble local re gulations (e.g., laws, guidelin es). • Prop er grounding (connec tion to ground) is ver y imp or tan t to pr otect the Hy bri d IP-PB X from[...]

2.2 Inst allation of the Hybrid IP-PBX Installation Manual 49 2.2.6 Install ing/Removing the Optiona l Service Cards CA UTION T o prote ct the back boar d from s tatic ele ctri city , do not touch p ar ts on the back board in th e main unit and on t he optiona l ser v ice ca rds. T o dis charge stati c electr icity , touch ground or wear a groundin[...]

2.2 Install ation of the Hybrid IP-PBX 50 Installation Manual 2. Holding th e card a s shown be low , push the rel ease lev er in the direc tion o f the arr ow so that th e card engage s securel y with the co nnecto r on the b ack board. 3. T ur n the 2 screws clockwise to fix the c ard in plac e. Note Make sure the screws are ti ghtened to gr ound[...]

2.2 Inst allation of the Hybrid IP-PBX Installation Manual 51 Cover ing the Blank Sl ots Be sur e to cover each slo t in whi ch no opti onal ser vi ce car d is ins talled by usi ng a B lank Sl ot Cover . CA UTION F ailure to insta ll the Bl ank S lot Cover ma y ca use el ectroma gnetic i nterference.[...]

2.2 Install ation of the Hybrid IP-PBX 52 Installation Manual Handling of the Cables When c ables are co nnecte d to the Hybr id IP-P BX, r un the cables to ei ther the r ight or the left an d then towards the back of the s helf as sh own below . Note F or safety reasons, do n ot stretch, b end, or pinch t he AC pow e r co rd. 1 2 3 4[...]

2.2 Inst allation of the Hybrid IP-PBX Installation Manual 53 Remo vi ng the Op tional Servi ce Cards 1. T ur n the 2 s crews counter clockwise to loos en them. 2. Pull the releas e lev e r in th e dire ction o f the arrow to discon nect t he ca rd from the b ack board. Pu ll the card from t he shelf t o remove it. Screws Release Lever Back Board[...]

2.2 Install ation of the Hybrid IP-PBX 54 Installation Manual 2.2.7 T ypes of Connectors Connector T ype Pin Number Used f or (T wist ed pair cab le) • DHLC8 (KX-TD A01 70) • SLC8 (K X-TDA0173) • SLC16 ( KX-TD A 0174) • MSLC 16 (KX-TD A0175) • LCO T8 (KX-TD A0180) • LCO T 16 (KX-TDA0181) (T wist ed pair cab le) • CSIF4 (KX-TD A0143 ) [...]

2.2 Inst allation of the Hybrid IP-PBX Installation Manual 55 • IP-GW4 ( KX-T D A04 80) •B a s i c S h e l f •M P R •M P R Connector T ype Pin Number Used f or RS-232C 9 5 6 1 USB 2 1 3 4 Mini Plug 2 4[...]

2.2 Install ation of the Hybrid IP-PBX 56 Installation Manual 2.2.8 Attaching a Ferrite Core A ferrite core must be atta ched wh en: • connec ting IP-G W16 and IP-E XT16 c ards usin g an RJ 45 connec tor , or • connec ting extension c ards us ing an Amphe nol conn ector. The ferrite core is i ncluded with the card . When connecting an IP-GW16/I[...]

2.2 Inst allation of the Hybrid IP-PBX Installation Manual 57 If you need to o pen the f e rri te core, us e a flat head scr ewdriver to unlat ch the case of the ferrit e core.[...]

2.2 Install ation of the Hybrid IP-PBX 58 Installation Manual 2.2.9 Fastening Ampheno l Conne ctor An Amp henol 5 7JE-ty pe co nnector i s used on som e of the optional s er vi ce car ds. T o c onnect an A mpheno l connec tor , use the s pr ing la tch o r scr ew to fix the upper par t and use V elcro® tape to fix t he lower par t of the conne ctor[...]

2.2 Inst allation of the Hybrid IP-PBX Installation Manual 59 Amphenol Connector Pin Assignm ent Chart Below is an Amph enol co nnecto r pin assi gnment char t f or all optiona l ser vi ce card s that use th e Amphen ol connec tor . For more detail s, ref er to the app ropr iate sec tion in " 2.4 Inform ation a bout the CO Line C ards" an[...]

2.2 Install ation of the Hybrid IP-PBX 60 Installation Manual 2.2.10 W all Mounting (KX-TD A200) CA UTION • Make sure that t he wall the shelf will b e attac hed to is capable of suppor ting at lea st 4 times the weight of the sh elf. • Dri ve mounting screws i nto the wall. Be car eful to avoid touching any m etal laths, wi re laths or metal p[...]

2.2 Inst allation of the Hybrid IP-PBX Installation Manual 61 2. Hook the sh elf ont o the met al bracket, making sure th at the shel f slides down and ont o the hoo ked par ts of the metal brack e t. Use 2 s crews (B) to fix both s ides of th e shelf. T O P Screw (B)[...]

2.2 Install ation of the Hybrid IP-PBX 62 Installation Manual 2.2.11 W all Mounting (KX-TD A100) CA UTION • Make sure that t he wall the shelf will b e attac hed to is capable of suppor ting at lea st 4 times the weight of the sh elf. • Dri ve mounting screws i nto the wall. Be car eful to avoid touching any m etal laths, wi re laths or metal p[...]

2.2 Inst allation of the Hybrid IP-PBX Installation Manual 63 2. Hook the sh elf ont o the met al bracket, making sure th at the shel f slides down and ont o the hoo ked par ts of the metal brack e t. Use 2 s crews (B) to fix both s ides of th e shelf. TOP Screw (B)[...]

2.2 Install ation of the Hybrid IP-PBX 64 Installation Manual 2.2.12 Floor Standing (KX- TD A200 Only) Notes • Do not block the openin gs of the shelf. Allow spac e of at least 2 0 cm (8 in) above and 10 cm (4 in) at the sides of the sh elf. • Make sure that t he surface behi nd the s helf is flat and free of o bstac les, so that th e openi ngs[...]

2.2 Inst allation of the Hybrid IP-PBX Installation Manual 65 3. Lift the shel f , attach it to the meta l bracket, slide it backwards until it l ocks, and retain it with 2 scr ews (B). 4. Fix the fr ont cover on the shelf (refer to "2.2.3 Opening /Closing the Front Cov er") . Screws (B) Metal Bracket FRONT TO P 1 2[...]

2.2 Install ation of the Hybrid IP-PBX 66 Installation Manual 2.2.13 Surge Protector Installation Overvie w A mass ive electr ical surg e can be c aused if lightn ing s trikes a teleph one ca ble 10 m (33 ft) above ground, or if a teleph one line comes into c ontac t with a power li ne. A surge p rotector is a device that is co nnecte d to a CO lin[...]

2.2 Inst allation of the Hybrid IP-PBX Installation Manual 67 Outsid e Installation If you install a n extension ou tside of the buildin g, the following prec autions a re reco mmende d: a. Install the extension wire unde rground. b. Use a co nduit to protect the wire. Note The su rge prot ector for an e xten sion and CS is different from th at for[...]

2.2 Install ation of the Hybrid IP-PBX 68 Installation Manual 1. Connect the grounding r od to th e surge p rotector us ing a groun ding wir e with a cr oss-sec tional area of at least 1 .3 mm 2 . 2. Bur y the groundin g rod nea r the p rotector. The grounding wir e sho uld be as shor t as pos sible. 3. The grounding wir e should r un st raight to [...]

2.3 Inf ormation about the Main Proce ssing Card Installation Manual 69 2.3 I nf ormation about the Main Pr ocessing Car d 2.3.1 MPR Card Function Contains the ma in proc essor for all pr ocesse s, basic sh elf ma in protoc ol, time switch (TSW) contr ol, detecti on of s ystem c lock alar m , basi c sh elf power down alar m, and watchdo g timer ov [...]

2.3 Inf ormation about the Main Proce ssing Card 70 Installation Manual • A LITH IUM BA TTER Y IS USED IN THE MPR CARD . THERE IS A RISK OF EXPLOSION IF THE BA TTER Y IS REPLA CED WITH THE I N CORRE C T TYPE. DISPOSE OF USED BA TTERIES A CCORDI NG T O THE MA NUF ACTURER'S INSTR UCTIONS. LED Indications Indicati on Color Descrip tion BA TT A [...]

2.3 Inf ormation about the Main Proce ssing Card Installation Manual 71 2.3.2 MEC Car d (KX-TD A0105) Function Memo r y expansion c ard to inc rease system data st orage sp ace and d ouble the nu mber of DP Ts, using Digital XDP conn ection. T o be m ounted on the M PR card . Accessories a nd User-supplied Items Accesso ries (included): Screws × 2[...]

2.3 Inf ormation about the Main Proce ssing Card 72 Installation Manual 2.3.3 RMT Card (KX-TD A 0196) Function Analog modem car d for remote communi cation with the Hybr id IP -PBX. ITU- T V .90 sup por t . T o be m ounted on the MP R card. Accessories and User -supplied Items Accessories (included): Screws × 2 User-supplied (not incl ude d): none[...]

2.4 Inf ormation about the CO Line Car ds Installation Manual 73 2.4 I nf ormation a bout the CO Line Car ds 2.4.1 LCO T8 Card (KX-TD A0180) and L CO T16 Car d (KX- TD A0181) Function Accessories a nd User-supplied Items Accesso ries (included): Screws × 2 User- s upplied (not inc luded): Am phenol connec tor Notes • T o con nect th e Ampheno l [...]

2.4 I nform ati on a bou t th e CO Lin e Cards 74 Installation Manual Pin Assignments Amphenol Connector Note Pin assig nments for the pins 9 to 16 and 34 to 41 are for the LCOT16 card only . LED Indications No. Signal Name Function No. Sign a l Name Function 1 RA Ring por t 1 26 T A T ip por t 1 2 RB Ring por t 2 27 TB Tip por t 2 3 RC Ring p or t[...]

2.4 Inf ormation about the CO Line Car ds Installation Manual 75 2.4.2 CID8 Card (KX-TD A0193) Function 8-por t Caller ID signal ty pe FSK/FSK ( with Call Waiting Call er ID [Visua l Calle r ID])/DTMF . T o be mounte d on the LCOT8/LCO T 16 ca rds. Accessories a nd User-supplied Items Accesso ries (included): Screws × 2 User- s upplied (not inc lu[...]

2.4 I nform ati on a bou t th e CO Lin e Cards 76 Installation Manual 2.4.3 T1 Card (KX-TD A0187) Function 1-por t T1 CO line card . EIA/TIA stand ard com plian t. Accessories and User -supplied Items Accessories (included): n one User-supplied (not incl ude d): RJ45 co nnector Notes • Connect t his op tional s er vic e card to the CO l ine throu[...]

2.4 Inf ormation about the CO Line Car ds Installation Manual 77 Pin Assignments RJ45 Connector LED Indications No. Signal Name Level [V] Function 1 RX+ (+ ) Rec eiv e data (+ ) 2 RX- (-) Rec eive data (-) 3 Reser ved – – 4 TX- (-) T ransm it data (-) 5 TX+ (+) T ransmit data (+) 6-8 Reser ved – – Indication Color Description CARD ST A TUS [...]

2.4 I nform ati on a bou t th e CO Lin e Cards 78 Installation Manual 2.4.4 PRI23 Card (KX-TD A0290) Function 1-por t ISDN Pri mar y Rate In terface card (23 B channels ). NI (Nor th A meri can stan dard ISDN p rotocol) compl iant. Accessories and User -supplied Items Accessories (included): n one User-supplied (not incl ude d): RJ45 co nnector Not[...]

2.4 Inf ormation about the CO Line Car ds Installation Manual 79 Pin Assignments RJ45 Connector LED Indications No. Signal Name Level [V] Function 1 RX+ (+ ) Rec eiv e data (+ ) 2 RX- (-) Rec eive data (-) 3 Reser ved – – 4 TX- (-) T ransm it data (-) 5 TX+ (+) T ransmit data (+) 6-8 Reser ved – – Indication Color Description CARD ST A TUS [...]

2.4 I nform ati on a bou t th e CO Lin e Cards 80 Installation Manual 2.4.5 IP-GW4 Card (KX-TD A0480) Function 4-channe l V oIP gatewa y card. Compli ant with V oIP H.323 V . 2 prot ocol, and ITU-T G. 729a, an d G.723.1 CODEC metho ds. G3 f ax suppo r t. Accessories and User -supplied Items Accessories (included): C D-ROM (incl uding PC programming[...]

2.4 Inf ormation about the CO Line Car ds Installation Manual 81 LED Indications Indication Color Description CARD ST A TUS Gr een/Re d Card st atus indi catio n • OFF: P ower Off • Gree n ON: No r mal ( all por ts are i dle) • Gree n Flash ing (60 t imes per minute): No r mal ( a por t is in u se) • R ed ON: F a ult (inc ludes reset) • R[...]

2.4 I nform ati on a bou t th e CO Lin e Cards 82 Installation Manual 2.4.6 IP-GW4E Card (KX-TD A0484) Function 4-channe l V oIP gatewa y card. Compli ant with V oIP H.323 V . 2 prot ocol, and ITU-T G. 729a, G. 723.1, and G.711 CODEC m ethods. Accessories and User -supplied Items Accessories (included): C D-ROM (incl uding document ation for web pr[...]

2.4 Inf ormation about the CO Line Car ds Installation Manual 83 LED Indications Indication Color Description CARD ST A TUS Gr een/Re d Card st atus indi catio n • OFF: P ower Off • Gree n ON: No r mal ( all por ts are i dle) • Gree n Flash ing (60 t imes per minute): No r mal ( a por t is in u se) • R ed ON: F a ult (inc ludes reset) • R[...]

2.4 I nform ati on a bou t th e CO Lin e Cards 84 Installation Manual 2.4.7 IP-GW16 Card (KX-TD A0490) Function 16-chann el V oIP gatewa y car d. Com pliant wit h V oIP H.323 V .2 p rotocol , and ITU- T G.729a, G .723.1 , and G.711 CODEC m ethods. Accessories and User -supplied Items Accessories (included): Ferr ite cor e × 1, CD- ROM (including d[...]

2.4 Inf ormation about the CO Line Car ds Installation Manual 85 LED Indications Indication Color Description CARD ST A TUS Gr een/Re d Card st atus indi catio n • OFF: P ower Off • Gree n ON: No r mal ( all por ts are i dle) • Gree n Flash ing (60 t imes per minute): No r mal ( a por t is in u se) • R ed ON: F a ult (inc ludes reset) • R[...]

2.5 I nform ati on a bou t th e Ex tens ion Ca rds 86 Installation Manual 2.5 Inf ormation about the Extension Car ds 2.5.1 CSIF4 Ca r d (KX-TD A0143) a nd CSIF8 Card (KX-TD A0144) Function CSIF4: 4-p or t CS interface card for 4 CSs. CSIF8: 8-p or t CS interface card for 8 CSs. Accessories and User -supplied Items Accessories (included): n one Use[...]

2.5 Inf ormation about the Extension Card s Installation Manual 87 Editing the CS Name using the KX-TD A Maintenance Console While programming the Hyb rid IP-P BX, we st rongly reco mmend t hat you input a u nique reco gnizable CS name (ma ximum 20 characte rs) for each CS por t in use, and "(Reser ved)" or "(Not for CSIF4)" f o[...]

2.5 I nform ati on a bou t th e Ex tens ion Ca rds 88 Installation Manual LED Indications Indicati on Color Descrip tion CARD ST A TUS Green/Red Ca rd status indica tion • OFF: P ower Off • Green O N: Nor mal (all p or ts are idle) • Green F lashin g (60 times per minute): N or mal ( a por t is in u se) • Red ON: F aul t (includes reset) ?[...]

2.5 Inf ormation about the Extension Card s Installation Manual 89 2.5.2 DHLC8 Card (KX-TD A0170) Function 8-po r t di gital h ybrid e xtensi on car d for DPTs, APTs , SL Ts, D SS consol es, an d PT - interf ac e CSs, with 2 power f ai lure transfer (PFT) por ts. Accessories a nd User-supplied Items Accesso ries (included): S crews × 2, Ferrite co[...]

2.5 I nform ati on a bou t th e Ex tens ion Ca rds 90 Installation Manual Pin Assignments Amphenol Connector No. Signal Name Function No. Signal Name Function 1 RA SL T Ring por t 1 2 6 T A SL T Tip po r t 1 2 D2A PT Data p or t 1 (Low) 27 D 1A PT Data por t 1 (High) 3 Res er ved – 28 R ese r ved – 4 RB SL T Ring por t 2 2 9 TB SL T Tip po r t [...]

2.5 Inf ormation about the Extension Card s Installation Manual 91 LED Indications Indication Color Description CARD ST A TUS Gree n/ Orange/Red Card st atus i ndicatio n • OFF: P ower Off • Gree n ON: No r mal ( all por ts are i dle) • Gree n Flash ing (60 t imes per minute): No r mal ( a por t is in u se) • Orange F lashing : Detection of[...]

2.5 I nform ati on a bou t th e Ex tens ion Ca rds 92 Installation Manual 2.5.3 DLC8 Car d (KX-TD A0171) Function 8-por t digital extension card for DPTs, DSS c onsoles, and PT -interface CSs. Accessories and User -supplied Items Accessories (included): Screws × 2, F errite core × 1 User-supplied (not incl ude d): Ampheno l conn ector Notes • A[...]

2.5 Inf ormation about the Extension Card s Installation Manual 93 Pin Assignments Amphenol Connector LED Indications No. Signal Name Fun c tion No. Signa l Name Function 1 Reser ved – 26 Res er ved – 2 D2A Data por t 1 (Low) 27 D1A Data por t 1 ( High) 3-4 Reser ved – 28-29 R eser ved – 5 D2B Data por t 2 (Low) 30 D1B Data por t 2 ( High) [...]

2.5 I nform ati on a bou t th e Ex tens ion Ca rds 94 Installation Manual 2.5.4 DLC1 6 Car d (KX-TD A0172) Function 16-por t dig ital extension card f o r DPTs, DSS c onsoles, an d PT -inter f a ce CSs. Accessories and User -supplied Items Accessories (included): Screws × 2, F errite core × 1 User-supplied (not incl ude d): Ampheno l conn ector N[...]

2.5 Inf ormation about the Extension Card s Installation Manual 95 Pin Assignments Amphenol Connector LED Indications No. Signal Name Fun c tion No. Signa l Name Function 1 D2A Data por t 1 (Low) 26 D1A Data por t 1 ( High) 2 D2B Data por t 2 (Low) 27 D1B Data por t 2 ( High) 3 D2C Data por t 3 ( Low) 28 D 1C Data por t 3 ( High) 4 D2D Data por t 4[...]

2.5 I nform ati on a bou t th e Ex tens ion Ca rds 96 Installation Manual 2.5.5 SLC8 Card (KX-TD A 0173) Function 8-por t extension car d for SL Ts with 2 power failure transfer (PFT) po r ts. Accessories and User -supplied Items Accessories (included): Screws × 2, F errite core × 1 User-supplied (not incl ude d): Ampheno l conn ector Notes • A[...]

2.5 Inf ormation about the Extension Card s Installation Manual 97 Pin Assignments Amphenol Connector LED Indications No. Signal Name Fun c tion No. Signa l Name Function 1 RA Ring por t 1 26 T A Tip port 1 2-3 Reser ved – 27-28 R eser ved – 4 RB Ring por t 2 29 TB Tip po r t 2 5-6 Reser ved – 30-31 R eser ved – 7 RC Ring port 3 32 TC Tip p[...]

2.5 I nform ati on a bou t th e Ex tens ion Ca rds 98 Installation Manual 2.5.6 EXT -CID Car d (KX-TD A0168) Function Sends Caller ID signa ls to e xte nsion por t s. T o be m ounted on the S LC8 car d only . Accessories and User -supplied Items Accessories (included): Screws × 2 User-supplied (not incl ude d): none EXT-CID Card Screw SLC8 Card in[...]

2.5 Inf ormation about the Extension Card s Installation Manual 99 2.5.7 SLC16 Card (KX-TD A0174) and MSLC16 Card (KX- TD A0175) Function Accessories a nd User-supplied Items Accesso ries (included): S crews × 2, Ferrite core × 1 User- s upplied (not inc luded): Am phenol connec tor Notes • P anas onic SL T with Mes sage W aitin g Lamp (e.g., K[...]

2.5 I nform ati on a bou t th e Ex tens ion Ca rds 100 Installat ion Manual Pin Assignments Amphenol Connector LED Indications No. Signal Name Function No. Signal Name F unc tion 1 RA Ring por t 1 26 T A Tip port 1 2 RB Ring por t 2 27 TB Tip por t 2 3 RC Ring port 3 28 TC Tip po r t 3 4 RD Ring port 4 29 TD Tip po r t 4 5 RE Ring por t 5 30 TE Tip[...]

2.5 Inf ormation about the Extension Card s Installation Manual 101 2.5.8 IP-EXT16 Card (KX-TD A0470) Function 16-cha nnel V oIP extension card . Complian t with Panasonic prop r ietar y pr otocol, a nd IT U-T G.729a and G.711 CODEC m ethods. Accessories a nd User-supplied Items Accesso ries (included): Fe r r it e c o re × 1 User- s upplied (not [...]

2.5 I nform ati on a bou t th e Ex tens ion Ca rds 102 Installation Manual LED Indications Indicati on Color Descrip tion CARD ST A TUS Green/Red Ca rd status indica tion • OFF: P ower Off • Green O N: Nor mal (all p or ts are idle) • Green F lashin g (60 times per minute): N or mal ( a por t is in u se) • Red ON: F aul t (includes reset) ?[...]

2.6 Inf ormation about the Other Cards Installation Manual 103 2.6 Inf ormation about the Other Car d s 2.6.1 OPB3 C ar d (KX-TD A0190) Function Option al 3-sl ot bas e card for mount ing a m aximum of 3 optiona l ser vice ca rds from the following: •D P H 4 c a r d •E I O 4 c a r d • ECHO16 c ard •M S G 4 c a r d Accessories a nd User-supp[...]

2.6 I nform atio n ab out t he Ot her Cards 104 Installation Manual 2.6.2 DPH4 Card (KX-TD A0161) Function 4-por t door phone c ard for 4 door pho nes and 4 door openers. T o be mounted on the OPB3 c ard. Accessories and User -supplied Items Accessories (included): S crews × 3, 1 0-pin ter m inal block × 1 , 8-pin te r minal block × 1 User-suppl[...]

2.6 Inf ormation about the Other Cards Installation Manual 105 Pin Assignments 8-pin T erminal Bloc k 10-pin T erminal Bloc k No. Signal Name Function 1 DP4 Door pho ne 4 tran smit 2 com4 Door pho ne 4 r eceive 3 DP3 Door pho ne 3 tran smit 4 com3 Door pho ne 3 r eceive 5 DP2 Door pho ne 2 tran smit 6 com2 Door pho ne 2 r eceive 7 DP1 Door pho ne 1[...]

2.6 I nform atio n ab out t he Ot her Cards 106 Installation Manual 2.6.3 EIO4 Card (KX-T D A0164) Function 4-por t externa l input/ou tput ca rd. T o b e moun ted on the O PB3 card. Accessories and User -supplied Items Accessories (included): S crews × 3, 1 0-pin ter m inal block × 1 , 8-pin te r minal block × 1 User-supplied (not incl ude d): [...]

2.6 Inf ormation about the Other Cards Installation Manual 107 Pin Assignments 8-pin T erminal Bloc k 10-pin T erminal Bloc k No. Signal Name Function 1C 4 b C o n t r o l 4 2 C4 a Cont rol 4 c om 3C 3 b C o n t r o l 3 4 C3 a Cont rol 3 c om 5C 2 b C o n t r o l 2 6 C2 a Cont rol 2 c om 7C 1 b C o n t r o l 1 8 C1 a Cont rol 1 c om No. Signal Name[...]

2.6 I nform atio n ab out t he Ot her Cards 108 Installation Manual External Sen sor P ower to the externa l sensor is provided fro m the EIO4 ca rd and must be grounded through the EI O4 card as ind icated in the di agram below . A pai r of "se nsor" a nd "comm on" l ines a re conn ected t o the E IO4 car d for each e x ter nal[...]

2.6 Inf ormation about the Other Cards Installation Manual 109 2.6.4 EC HO16 Card (KX-TD A0166) Function 16-cha nnel car d for echo canc ella tion du ring conferences. T o be moun ted on th e OPB3 card . Accessories a nd User-supplied Items Accesso ries (included): Screws × 3 User- s upplied (not inc luded): no ne Note T o establish a conference c[...]

2.6 I nform atio n ab out t he Ot her Cards 110 Installation Manual 2.6.5 MSG4 Card (KX-TD A 0191) Function 4-cha nnel m essage car d. T o be mounted on the OPB3 c ard. Accessories and User -supplied Items Accessories (included): Screws × 3 User-supplied (not incl ude d): none Screw MSG4 Card OPB3 Card inside[...]

2.6 Inf ormation about the Other Cards Installation Manual 111 2.6.6 CTI-L INK Card (KX-TD A0410) Function Ether n et card for CTI co mmunica tion v ia 10BAS E-T p or t. CST A Phase 3 protoc ol co mpatible. Accessories a nd User-supplied Items Accesso ries (included): n one User- s upplied (not inc luded): RJ45 c onnector Notes • The max imum len[...]

2.6 I nform atio n ab out t he Ot her Cards 112 Installation Manual LED Indications Indicati on Color Descrip tion CARD ST A TUS Green/Red Ca rd status indica tion • OFF: P ower Off • Green O N: Nor mal • Red ON: F aul t (includes reset) • Red Fl ashing ( 60 times per minute): O ut of Se r vic e LINK ST A TUS Green Link s tatus ind ication [...]

2.7 Connectio n of Extensions Installation Manual 113 2.7 C onnection of Ex tensions 2.7.1 Ma xim um C abling Distances of the Extension Wiring (T wisted Cab le) Notice The max imum cabling di stance may vary depen ding on the co nditions. * The max imum cabling dis tance from the Hy bri d IP-PB X is the same e ven whe n the KX -T760 0 ser ies DPT [...]

2.7 Connecti on of Extensions 114 Installation Manual " " indica tes that the extension c ard sup por ts the te rm inal. PT -interface CS DPT APT DSS Console SL T DHLC8 Card MSLC16, S LC16, SLC8 Cards DLC16, DLC8 Ca rds[...]

2.7 Connectio n of Extensions Installation Manual 115 2.7.2 P aralle l Connection of the Extensio ns Any SL T can be con nected in parall el wit h an AP T or a DPT as follows. Note In additio n to an S L T , an an s wer ing machine, a fax machine or a m odem (PC ) can be conne cted i n parallel with an APT o r a DP T . With APT For parallel connec [...]

2.7 Connecti on of Extensions 116 Installation Manual Using an EXtr a Device P ort With KX -T7600 Series DPT With Other DPT T o DHLC8 card DPT SL T T o DHLC8 card To S LT 2-conductor wiring cord Connect pins "T" and "R". 4-conductor wiring cord Connect pins "T", "R", "D1" and "D2". T O MAI[...]

2.7 Connectio n of Extensions Installation Manual 117 2.7.3 Digital EXtra Device P o r t (Digital XDP) Connection A DPT can be connec ted to ano ther DPT on the Digital XDP co nnecti on. In add ition, if the DPT is co nnect ed to a DH LC8 card, it ca n also hav e an SL T con nected in P ara llel m ode or X DP mod e. Notes • Both DPT s must be K X[...]

2.7 Connecti on of Extensions 118 Installation Manual Using an EXtr a Device P ort SL T Master DPT Slave DPT 4-conductor wiring cord Connect pins "T", "R", "D1" and "D2". 2-conductor wiring cord Connect pins "T" and "R". 4-conductor wiring cord Connect pins "T", "R", &q[...]

2.7 Connectio n of Extensions Installation Manual 119 2.7.4 First P ar ty Ca ll Control CTI Connection CTI con nection b etween a P C and a KX -T7633/ T7636 DP T provides fir st par ty call c ontrol. The CTI connec tion is m ade v ia a USB i nterface (version 2.0), and us es the T A PI 2.1 protoco l. A USB M odule (KX-T76 01) must be conne cted to [...]

2.8 Conn ection of 2.4 GHz Portable Stations 120 Installation Manual 2.8 Connection of 2.4 GHz P or table Stat ions 2.8.1 Overview The following equipm ent is required t o conn ect the wireless system: CS: Cell Station (KX-TD A0142/KX- T0141) KX-TD A014 2 Using a CS IF Card This u nit deter mines the area cov e red by the wi rele ss syst em. Up to [...]

2.8 Conne ction of 2.4 GHz P ortable Station s Installation Manual 121 Please take into c onsiderati on the dista nce betwee n the CSs when s ite planni ng. Pl ease consult a cer t ified d ealer for detai ls. Howe ver , the requ ired dis tance between CS s may vary d ependi ng on the e nvironment of the insta llation site a nd condit ions i n whic [...]

2.8 Conn ection of 2.4 GHz Portable Stations 122 Installation Manual 2.8.2 Procedure Overvie w When c onnec ting the wireles s sys tem, us e extreme car e in cond ucting the si te su r ve y . An inco rrectly perform ed si te sur v ey ca n result in poo r se r vice ar ea, fr equent noise, and di scon nection o f call s. 1. In vestigate the installat[...]

2.8 Conne ction of 2.4 GHz P ortable Station s Installation Manual 123 4. Finish the site surve y Refer to "2.8.6 A fter Site Sur vey". a. Retur n al l DIP s w itches of each CS to t he OFF po sitio n, and s top supp lyin g power . b. T ur n off th e PS. 5. Connect the CS and PS to the Hybrid IP-PBX and test the operation Refer to "2[...]

2.8 Conn ection of 2.4 GHz Portable Stations 124 Installation Manual 2.8.3 Site Planning Choosi ng the best si te for th e CS require s careful planni ng and testing of es sential areas. The best locat ion may not always be conv en ient for inst allati on. Rea d the following infor matio n before insta lling the unit. Unde rs tandi ng Radi o W a ve[...]

2.8 Conne ction of 2.4 GHz P ortable Station s Installation Manual 125 Object Materi al T rans missi on T endency W all Co ncrete Th e thicker they are, the le ss radio wav es penetrate the m. Ferroconcrete Radio wav es ca n penetrat e them, but the more i ron there is, the more radio wav es a re refle cted. Window Glas s Radio wav es u sual ly pen[...]

2.8 Conn ection of 2.4 GHz Portable Stations 126 Installation Manual CS Co verage Area The example be low shows the s ize of the coverage area of 1 C S if it is in stall ed in an ar ea with no obs tacle s. Note Radio si gnal streng th lev el s are m easured duri ng the si te sur vey (refer to "2.8.5 Si te Sur vey"). Site Su r vey P repa r[...]

2.8 Conne ction of 2.4 GHz P ortable Station s Installation Manual 127 one CS bec omes weak . Howe ver , if a PS moves aw ay from a CS an d there ar e no CSs available for handov er , the PS may go out of range and the call could be lo st. If the sig nal from t he CS fades, due to the str u cture of t he building, the re may be some handover delay [...]

2.8 Conn ection of 2.4 GHz Portable Stations 128 Installation Manual 2.8.4 Before Site Survey Setting and Installing th e CS T em porarily f or Site Sur vey 1. Switch th e Radio Signal T est switch from O FF to ON. 2. Set t he CS n umber s wit ches as de sired. Note If more th an 1 CS is in Radio Si gnal T est mode, eac h CS mus t hav e a unique CS[...]

2.8 Conne ction of 2.4 GHz P ortable Station s Installation Manual 129 3. After se tting th e DIP switch, con nect an AC adaptor or batter y box to the CS us ing a p ower supply adaptor . Note The AC adaptor should be conne cted to a ver ticall y or iented or floor-mo unted AC outlet . Do not con nect the AC adaptor to a c eiling -mounted AC outlet[...]

2.8 Conn ection of 2.4 GHz Portable Stations 130 Installation Manual 2.8.5 Site Surv ey The P S has a Ra dio S ignal T est mo de that m onitor s the s tate of th e radio li nk to the CS. After in stall ing the CSs tem porari ly , set the PS to Ra dio Signa l T e st mode and mea sure each CS cover a ge are a. Then, r ecord the res ults on t he map o[...]

2.8 Conne ction of 2.4 GHz P ortable Station s Installation Manual 131 2. Measure the radio sig nal st rength by moving towards and awa y from the CS. a. Mov e t o the CS until the radio s ignal st rength lev el bec omes "12". b. Mov e away from th e CS and i dentify th e CS c ov erage a rea withi n which t he radio signal s trength lev e[...]

2.8 Conn ection of 2.4 GHz Portable Stations 132 Installation Manual b. Overlap the CS coverage areas of at l east 2 CSs at any lo catio n in the insta llati on site. c. Make sure that the radi o signal streng th lev el i s greater than "3" at any loc ation in the se r vic e area required by the user . Referri n g to the Stored Scan Data [...]

2.8 Conne ction of 2.4 GHz P ortable Station s Installation Manual 133 Deleting the Stored Scan Data Using the KX-TD7680 Using the KX-TD7690 Press 1, 9, and POWER for more than 2 seconds. 0 to 9, or # for all data Scan Data No. 1 9 T o the Desired Scan Data No. 2 Press 1, 9, and POWER for more than 2 seconds. 0 to 9, or # for all data Scan Data No.[...]

2.8 Conn ection of 2.4 GHz Portable Stations 134 Installation Manual 2.8.6 After Site Survey After o btaining the pr oper meas urement resu lts, ex i t Radi o Signal T est mode b ef o re conn ecting the CS to the Hybr id IP -PBX. 1. K eep pr essing the POWER button on the PS un til the P S is tur ned OFF . 2. Disconn ect the AC adaptor or bat ter y[...]

2.8 Conne ction of 2.4 GHz P ortable Station s Installation Manual 135 2.8.7 C onnecting a Cell Station to the Hybrid IP-PBX Using a CSI F Card Refer to the following e xam ple to c onnect a CS to th e Hybr id IP- PBX. Accessories a nd User-supplied Items for the CS Accesso ries (included): S crews × 2, Washers × 2 User- s upplied (not inc luded)[...]

2.8 Conn ection of 2.4 GHz Portable Stations 136 Installation Manual Using a DHLC/DLC Card Refer to the follo w ing example to connect a CS to t he Hybr id I P-PBX. Accessories and User -supplied Items f or the CS Accessories (included): S crews × 2, Washers × 2 User-supplied (not incl ude d): RJ11 co nnector Note F or d etails ab out DHLC card o[...]

2.8 Conne ction of 2.4 GHz P ortable Station s Installation Manual 137 Connecting the CS 1. Connect the cable from the CS IF/DHLC/DLC card to the CS. 2. P ass the cable through the groove of the CS (in any direc tion depe nding o n your preference). Modular T o CSIF/DHLC/DLC card T o CSIF/DHLC/DLC card TO MAIN UNIT / P ABX[...]

2.8 Conn ection of 2.4 GHz Portable Stations 138 Installation Manual Registering the PS The P S must be r egister ed to the Hybr id IP -PBX be f o re it ca n be us ed. Pr ogramming of both the PS a nd Hybr id IP- PBX is requ ired . A P T with multil ine d isplay (e.g., KX -T7636 6-line displ a y ) is requir ed to perform the Hybr id IP -PBX syst em[...]

2.8 Conne ction of 2.4 GHz P ortable Station s Installation Manual 139 PS Registratio n When the PS h as not bee n regis tered yet When reg ister ing t he PS for the fir st time, it is pos sible to select the des ired langu age for the displ a y . (Y ou do not nee d to ente r the PS system programming mode wh en regis ter ing for the firs t time.) [...]

2.8 Conn ection of 2.4 GHz Portable Stations 140 Installation Manual Setting the System Loc k When a s ystem l ock has been set, th e syste m lock password will be re quired for PS syste m setting . Using the KX-TD7680 Using the KX-TD7690 Choose "Enable/Disable". Select "SYSTEM LOCK". C.Tone 4 digits 4 digits ENABLE DISABLE Syst[...]

2.8 Conne ction of 2.4 GHz P ortable Station s Installation Manual 141 Setting the P erson al Identification Number (PIN) f or PS Registration T o pr ev ent re giste ring the P S to a wrong Hybr id I P-PBX, a PIN for PS registrati on ca n be set to th e Hyb r id IP-PBX. B efore registeri ng the PS to the Hyb rid IP -PBX, enter the P IN set to the H[...]

2.8 Conn ection of 2.4 GHz Portable Stations 142 Installation Manual PS T erminati on Confir m the following before cancelin g the PS r egistration: • The PS is tur ned on. • The PS is withi n range. If the regis tration information is still stored i n the PS Using the KX-TD7680 Using the KX-TD7690 T esting the Operation W alk aro und the ser v[...]

2.8 Conne ction of 2.4 GHz P ortable Station s Installation Manual 143 2.8.8 W all Mounting 1. Place the reference f or wall mount ing (on the follo w ing page) on the wall to mar k the 2 screw positi ons. 2. Install th e 2 sc rews and washer s (inc luded) i nto the wall . Notes • Make sure that th e screw heads a re at the s ame dis tance fro m [...]

2.8 Conn ection of 2.4 GHz Portable Stations 144 Installation Manual Reference for W all Mounting Please c opy this page and use as a reference for w al l mou nting. Note Make sure to set the pri nt size to co rresp ond with the si ze of this pa ge. If the di mension of the pa per output sti ll deviates sl ightly fro m the me asur ement indi cated [...]

2.9 Connection of Do orphones, Door Opener s, External Senso rs, and Externa l Relays Installation Manual 145 2.9 C onnection of Doo rphones, Door Opener s, Externa l Sensors, and Ext ernal Relays 2.9.1 Conn ection o f Doorphon es, Door Openers, External Sensors, and External Rela ys The Hybr id IP -PBX su ppor ts a maxi mum of 16 door p hones, 16 [...]

2.9 Connecti on of Doorphones, Door Openers , External Sensor s, and External Rela ys 146 Installation Manual 2. P ass the wires through the hole i n the base c ov e r , and attac h the base c over to a wall using 2 sc rews. Note T wo kinds of sc rews are incl uded w ith a KX-T308 65. Plea se cho ose the app ropr ia te kind for y o ur wall type. 3.[...]

2.9 Connection of Do orphones, Door Opener s, External Senso rs, and Externa l Relays Installation Manual 147 2. Attach the ter mi nal blocks to the co nnecto rs of the DPH4/E IO4 card on the Hy brid IP-P BX. T o door phones/ door openers/ e xter nal sensors/ e xter nal relays[...]

2.10 Connec tion of Pe ripherals 148 Installation Manual 2.10 Connection of P eripher als 2.10.1 Connection of P erip herals BGM/MOH The Hybr i d IP-PBX p rovides Background Mu sic and Musi c on Hold. Up to 2 exter nal mus ic sourc es (e.g., user-s uppli ed radios) c an be c onnected to the H ybr id I P-PBX . CA UTION • Wir ing sho uld be done c [...]

2.10 C onnection of P eripheral s Installation Manual 149 Pa g e r Up to 2 pag ing devices ( user- supplied ) ca n be co nnecte d to the Hybr id IP -PBX. CA UTION Exter na l P agi ng Jacks are SEL V por ts a nd sho uld only be con necte d to app rov ed SEL V devices. PC/Printer (via RS-232C) The Hy brid IP-PBX is e quippe d with an RS -232C interfa[...]

2.10 Connec tion of Pe ripherals 150 Installation Manual For con necting a printer/P C with a 25-pin RS-232C connecto r RS-232C Signals • Receive Data (RXD): …(input) Conv eys sign als from the pr i nter or t he PC. • T r ansmit Data ( TXD): …(out put) Conv eys si gnals fr om the unit to the pr inter o r the P C. A "Mark" cond iti[...]

2.10 C onnection of P eripheral s Installation Manual 151 PC/CT I Ser ver (via USB version 2. 0) The Hy brid IP-PBX is equi pped wi th a USB i nterface. This in terf a ce provide s co mmunication between th e Hybri d IP-PB X and a P C or a CT I ser ver . The PC is us ed for system programming, diagno stics and exter nal system databas e storage ( s[...]

2.11 P ower F ailure Connecti ons 152 Installation Manual 2.11 P ower F ailure Conn ections 2.11.1 P o wer Failure Connections When t he power su pply to the Hybr id I P-PBX fails, power failure transfer (PFT) wil l switch from the c urrent connec tion to the P ower F ail ure Conne ction . Refer to "2.4.1 P ower F a ilure T ran sfer" in t[...]

2.11 P ower Fa ilure Connections Installation Manual 153 RJ11 Connector Pin Assignments f or CO line Card PFT P orts 1 and 2 PFT P orts 3 and 4 (for LCO T16 car d only) RJ11 Connector Pin Assignments f or Extension Card PFT P orts 1 and 2 PFT P orts 3 and 4 (f or MSLC16/SLC16 card onl y) No. Signal Name Function 1 R2 Ring po r t 2 2 R1 Ring po r t [...]

2.12 Starting the Hybrid IP-PBX 154 Installation Manual 2.12 Star ting the Hybrid IP- PBX 2.12.1 Start ing the Hybrid IP-PBX CA UTION • SD Memor y Card must be ins er t ed in th e SD Me mor y C ard slo t of the M PR card before star tup. • Before touchin g the S ystem Ini tiali ze Switch, d ischarge s tatic electr ici ty by touch ing ground or [...]

2.12 Starting the Hybrid IP-PBX Installation Manual 155 2. Plug the AC power cord int o the Hyb rid I P-PBX a nd an AC outlet, and tur n on the Hybr id IP- PBX. Th e R UN in dicato r will f lash. Note F or s afety reasons, do not s tretch, b end, or pi nch the AC power cord. 3. While the R UN indicato r is flas hing, slide the Syste m Initial ize S[...]

2.12 Starting the Hybrid IP-PBX 156 Installation Manual Conf irmin g the CO Li ne Connect ion After ini tiali zatio n, program the Hybr id IP-P BX an d connec t CO line s to the Hybr id IP -PBX. T o con fir m that th e CO lines are su ccessf ully con necte d, dial [ ] [3] [7] + CO line number (3 di gits) on a PT , or pres s the P T's S- CO but[...]

Installation Manual 157 Section 3 Guide f or the KX-TD A Maintenance Console Explai ns the ins tall ation p rocedure, str uc ture, and bas ic informati on of th e KX-T D A M ainten ance Cons ole.[...]

3.1 Overvie w 158 Installation Manual 3.1 Ove r vie w 3.1.1 Overview KX-TDA Maintenance Consol e is des igned to ser ve as an overall system programming reference for the Hybr id IP- PBX. T o program and adminis ter th e Hybr id IP- PBX by PC, y o u need t o install the K X-TDA Mainten ance Cons ole on to the PC. This manual des cri bes overv iew a[...]

3.2 Conn ection Installation Manual 159 3.2 Connection 3.2.1 Connecti on Serial Interface Connection Note F or pin ass ignments and m aximum cabling dista nce, refer to "2.10.1 Con nectio n of P e riph erals". LAN Connection vi a CTI-LIN K Car d Note F or pin ass ignments and m aximum cabling distanc e, refer to "2.6.6 CTI -LINK Card[...]

3.2 Conn ection 160 Installation Manual External Modem Connection After con necti ng the Hybr id IP -PBX and the e x ter nal modem, set the power s wit ch of th e externa l mode m to "ON", th en the exter nal m odem wi ll be in itial ized with the d efault values. The following A T c ommand settings may be required for the m odem: • The[...]

3.3 Insta llation of the KX-TD A Maintenan ce Console Installation Manual 161 3.3 I nstalla t ion of the KX-TD A Maintenance Console 3.3.1 Ins talling a nd Star ting the KX-T D A Maintenance Co nsole System Requirements Required Operat ing Sy stem • Microsof t® Windows® 9 8 SE, Windows Me, Wind ows 2000, or Windows XP Minimum Har dware Requirem[...]

3.3 Install ation of the KX-TD A Maintena nce Console 162 Installation Manual Starting the KX-TD A Maintenance C onsole and Assigning the Basic Items (Q u ic k Setup) When you star t the KX-TDA Maintenanc e Conso le with the Ins taller Level P rogrammer Co de and co nnect to the Hy brid IP-PBX for the first time after initiali zatio n (with th e fa[...]

3.3 Insta llation of the KX-TD A Maintenan ce Console Installation Manual 163 7. Follow the instr uctio ns of t he wiz ard and a ssign th e basi c items ( Quick Set up). The program menu appea rs. Y ou ma y now begi n programming t he Hybr id IP-PB X.[...]

3.3 Install ation of the KX-TD A Maintena nce Console 164 Installation Manual Notes • Duri ng a l ong pr ogramming se ssion, it is highl y recom mended that you per iodi call y sav e the system dat a to the S D Memor y Card. If th e Hybr id IP -PBX under goes a s udden p ower f ailur e or if the system is res et for some reason , all the syst em [...]

Installation Manual 165 Section 4 T r oub leshooting This sec tion p rovides infor mation on the Hybr id I P-PBX and telephone troublesh ooting .[...]

4.1 T roub leshooting 166 Installation Manual 4.1 T r oublesh ooting 4.1.1 Installation PROBLE M PROB ABLE CA USE SOLUTION Extensi on doe s n ot operat e. Ba d extension c ard. • Exchang e the car d for a known working one . Bad conn ectio n between th e Hybr id IP-P BX an d telep hone. • T a ke the telep hone and pl ug it i nto the same extens[...]

4.1 T roub leshooting Installation Manual 167 The ALAR M indic ator on the front of the shelf tur n s on red . A majo r sys tem er ror oc curs i n the Hybr id IP-PBX . • See the error log usin g the K X-TDA Mainten ance Cons ole (re f e r to "4.1 .5 T rou bleshooting by Err or Log") . PRO B LEM PROB ABLE CA USE SOLUTION[...]

4.1 T roub leshooting 168 Installation Manual 4.1.2 Connection Connection between the Hybrid IP-PBX and a PT: Connection between the Hybrid IP-PBX and an SL T: Connection between the Hybrid IP-PBX and an SL T that is polar ity-sensitive: CA USE The T/R is connected to the D1/D2. SOLUTION Use the correct cord (the inner 2 wires are f or T/R and the [...]

4.1 T roub leshooting Installation Manual 169 Connection between the central office and the Hybrid IP-PBX: CA USE CO line is connected to the T2/T1. CO line is connected to the T2/R1. SOLUTION Reconnect the CO line to the T1/R1 or T2/R2 of the telephone jack using 2-conductor wiring. T2 R1 T1 R2 CO line Hybr id IP-PBX Hybrid IP-PBX CO line T2 R1 T1[...]

4.1 T roub leshooting 170 Installation Manual 4.1.3 Operation PROBLE M PROB ABLE CA USE SOLUTION • When us ing the speaker phone on an A PT , nothing i s aud ible. • The HANDSET/HE ADSET select or is set t o the "HEADSE T" positi on. • Whe n the he adset is not us ed, se t the HANDSE T/HEADS ET selector to the "HANDSET" po[...]

4.1 T roub leshooting Installation Manual 171 • PS st ay s out of service when the CS status is changed from Out of Ser v ice to In Ser vice. • It may take about 20 s for CS to sta r t up after the status ha s been chang ed to In Ser vice. • W ait unt il the CS s tar ts up. PRO B LEM PROB ABLE CA USE SOLUTION[...]

4.1 T roub leshooting 172 Installation Manual 4.1.4 Using th e Reset Button If the Hyb r id IP-P BX does not ope rate proper ly , use the Res et But ton. Be f o re using the Res et But ton, tr y the sy stem feature agai n to co nfir m whe ther ther e definit ely i s a problem o r not. CA UTION In order to av oid poss ible corr uption of data on the[...]

4.1 T roub leshooting Installation Manual 173 4.1.5 T roub les hootin g b y Error Log When a m ajor sy stem e rror occur s in t he Hybr id IP- PBX, the A LARM i ndicator on the fr ont of the shelf tur ns on red, and the system logs t he error informa tion. Error Log Display Format Below is th e display format of t he err or log. T o see t he error [...]

4.1 T roub leshooting 174 Installation Manual 5 Sub Code Fi v e -digi t sub code (1XXYY ) 1: S helf n umber XX: Slot number KX-TDA100: 00 to 06 ( 00: MPR s lot; 01 to 06: F r ee slot) KX-TDA200: 00 to 11 ( 00: MPR s lot; 01 to 11: F r ee slot) YY : Physical por t number ( 01 to 16) F or OPB3 card , sub slo t number + por t number wi ll be displayed[...]

4.1 T roub leshooting Installation Manual 175 List o f Errors and Solu tions The tables below list the error s and thei r solu tions. When an error whose error code is ind icate d with "* " oc curs in the Hybr id I P-PBX, the ALA RM ind icato r on the fron t of the she lf tur ns on red, a nd the s ystem l ogs the er ror infor mation . Whe[...]

4.1 T roub leshooting 176 Installation Manual System Start-up and On-line Operation 220 Flas h ROM access err or • Detection of acces sing err or to Flash ROM of option al ser v ice c ard • See if th e corr espondin g optio nal ser v ice ca rd is inst alled prope r ly • Pull ou t and re- inser t the corresp ond ing op tional ser v ice car d ?[...]

4.1 T roub leshooting Installation Manual 177 011* DC power down • AC power do wn • P ower suppl y circ uit (PSU, back board) ma lfunc tion • Dete ction of over current (shor t circ uit on o ptional service cards) • Ch e ck the powe r supply syst em • See if th e AC cord is conne cted proper ly • Check the AC cord • Repla ce the AC co[...]

4.1 T roub leshooting 178 Installation Manual 023 Sy stem data file v e rsion e rror • Old system fi les on S D Memor y Ca rd • Defectiv e sy stem files on SD Memor y Ca rd • Restore the backup files • Re-ins tall the s oftware 024 Sy stem init ializatio n file v e rsion e rror 025 Card initializ ation file v ersion e rror 026 LCD fil e v e[...]

4.1 T roub leshooting Installation Manual 179 041* Ex pansi on Memor y Ca rd Fa i l u r e • MEC c ard is not p roper ly conne cted • See if th e corre sponding option al ser vic e car d is in stall ed pr operl y • Pull ou t and re- inser t the corre spond ing opt ional ser v ice c ard • Repla ce the corres pondi ng optional service card 090[...]

4.1 T roub leshooting 180 Installation Manual 231 LP R alive check error • Optiona l ser v ice card malfunction : DHLC, DLC , CSIF , T1, PRI, OPB3, CTI- LINK, IP-G W , SLC8, IP- EXT , LCO T • Back board malfun ction • MPR car d malf unctio n • See if th e corr espondin g optio nal ser v ice ca rd is inst alled prope r ly • Pull ou t and r[...]

4.1 T roub leshooting Installation Manual 181 310* P or t Link F ailur e • V oice Pr ocessi ng Syst em malfu nction • P or ts defective on optio nal ser v ice car d: DHLC, DLC • Check the V oice Pr ocessi ng Syste m • See if th e corre sponding option al ser vic e car d is in stall ed pr operl y • Repla ce the corres pondi ng optional ser[...]

4.1 T roub leshooting 182 Installation Manual 355 IP -unit al ive ch eck error • Optiona l ser v ice card malfun ction : IP-E XT • The IP-E XT car d will b e rebo oted automati cally if the error is tempo rar y • Repla ce the corres pondi ng IP- EXT card if th e card i s not star ted u p correc t ly 356 IP /TEL-unit communica tio n error 357 [...]

4.1 T roub leshooting Installation Manual 183 372 NDSS messag e over I PG W not ificatio n - caused by IPG W Tx reso urce limitati on • Optio nal s er vic e card malf unction: IP-GW • Ignore i f not frequ ent • Change the IP-GW card s tatus to O ut of Ser vic e, and then back to In Ser v ice 373 NDSS messag e over I PG W not ificatio n - caus[...]

4.1 T roub leshooting 184 Installation Manual 396 IP -GW Run • IP -GW is star ted from a remote m aintena nce PC • This i nforma tion is logge d when IP- GW is sta r ted from a re mote ma intena nce PC 510* SM DR disconnect • RS-232C cable not conne cted • Breaking of RS -232C c able • Pri nter (ter min al equipm ent) malfun ction • Che[...]

Installation Manual 185 Section 5 Appendix[...]

5.1 R evis ion H ist or y 186 Installation Manual 5.1 Revi sion History 5.1.1 PMPR Software File V er sio n 1.1xxx Ne w Options • System Comp onents T able New Contents • 2.7.3 Di gital EXtra Device P or t (Digital XDP) Con nection Change d Contents • 1.4.3 S ystem Cap acity • KX-TDA0105 M emor y Expans ion Car d (MEC) • KX-TDA0484 4-C ha[...]

5.1 Re vision History Installation Manual 187 5.1.2 PMPR Software F ile V ersion 2.0xxx Ne w Options • System C omponen ts T able Changed Co ntents • 1.4.3 Sy stem Cap acity • 2.9.1 Con necti on of Doo r phone s, Door Opener s, Exter nal S ensors, and Exter nal Relays • KX-TD A 0490 1 6-Channel V oIP Gatewa y Car d (IP-GW 16) • KX-TD A 04[...]

5.1 R evis ion H ist or y 188 Installation Manual 5.1.3 PMPR Software File V er sio n 3.0xxx Change d Contents • 1.4.3 S ystem Cap acity • 3.3.1 In stall ing and S tar ting the K X-TDA Maintenance Consol e[...]

Installation Manual 189 Inde x[...]

Index 190 Installation Manual Numerics 16-Chan nel Ec ho C anceller Ca rd (KX-TD A0166) 25, 109 16-Chan nel Vo IP Extens ion C ard (K X-TD A0470 ) 26, 10 1 16-Chan nel VoIP Ga teway Card (KX-TDA 0490) 26, 84 16-Port Ana log Trunk Ca rd (KX-TDA01 81) 26, 73 16-Port Digit al Extensi on Card (KX-T DA0172) 25, 94 16-Port Sin gle Line T elephon e Exte n[...]

Index Installation Manual 191 K KX-TD A Maint enanc e Console, Connec tion 159 KX-TD A Main tenanc e Cons ole, Ins tallatio n 161 KX-TD A Mai ntena nce Cons ole, Ove rview 158 KX-TD A Maint enance Con sole, Password Securit y 9 KX-TD A Mai ntena nce Cons ole, Qu ick Se tup 162 KX-TD A Maint enanc e Console, Syste m Requi rements 161 KX-TD A0103 (L-[...]

Index 192 Installation Manual TDA09 20) 26, 69 Sit e Plann ing, 2. 4 GHz Por tabl e Stati on 124 Site Survey, 2.4 GHz Port able Sta tion 130 Slave DPT, Digi tal XDP 117 SLC16 Card (KX-TDA017 4) 99 SLC8 Card (K X-TD A0173) 96 Spec ificat ions 27 Spec ificat ions, Cha ract eristic s 29 Spec ificat ions , Genera l Descrip tion 27 Spec ification s, Sy [...]

Index Installation Manual 193[...]

Panasonic Consumer Electronics Company, Division of Panasonic Corporation of North America One Panasonic Way, Secaucus, New Jersey 07094 Panasonic Puerto Rico, Inc. San Gabriel Industrial Park, Ave. 65 de Infantería, Km. 9.5, Carolina, Puerto Rico 00985 http://www.panasonic.com/csd Copyright: This material is copyrighted by Panasonic Communication[...]