Panasonic KX- TG2583B инструкция обслуживания

Panasonic World Wide Web address: http://www Panasonic corn for customers in the USA or Puerto Rico[...]

Before Initial Use Please read IMPORTANT SAFETY INSTRUCTIONS on page 80 before use. Read and understand all instructions. Thank you for purchasing your new Panasonic cordless telephone. Caller ID and Call Waiting Service, where available, are telephone company services After subscribing to Caller ID, this phone will display a caller’s name and ph[...]

For Best Performance Battery Charge A rechargeable Ni-Cd battery powers the handset Charge the battery for about 6 hours before initial use (p 11) Base Unit Location/Noise Calls are transmitted between the base unit and the handset using wireless radio waves For maximum distance and noise-free operation, the recommended base unit location is Away f[...]

Contents Location of Controls Displays Settings Connections Battery Charge Selecting the Dialing Mode Selecting the Line Mode Programmable Functions Setting the Auto Talk Feature Selecting the Ringer Volume Preparing the Answering System Greeting Message Programming Summary for the Answering System Day and Time Adjustment Selecting the Caller’s R[...]

Editing an Item in the Directory Erasing an Item from the Directory Intercom Transferring a Call Using the Intercom Special Features Automatic Security Code Setting For Call Waiting Service Users How to Use the PAUSE Button (For Analog PBX Line/Long Distance Service Users) Temporary Tone Dialing fFor Rotarv or Pulse Service Users) 50 51 52 53 54 54[...]

Location of Controls Base unit Antennas (p 3, 10) Button (p 52) IN USEKHARG (REDIAUPALBE) Button Button (p 54, 55) : (HOLD/RINGER] Button (p 18,29) blC (Microphone) (p 19, 28, 31, 52)[...]

[ NEW ME SS A G E ) Button (P 57) CALLER ID indicator (P 31, 33) ANSWER ON Indicator (p 56, 57, 59) ( ANSWER ON ) Button ( P 56) Ii?&@ Button (p 55) (G REETING / EDIT ) Buttoti (P 19,37) (STOP/EXIT) Button (p 19, 34, 48, 56, 57) (eriAae Button ( :p 20, 39, 5 Navigator Key uzmml,m) (p 20, 29, 34, 48, 57) 1,591[...]

I) Location of Controls Handset Display (p 9, 72) Headset Jack (p 70). . , (DIRECT) Button ( P 41,42) (m] Button (p 26, 31) (INTERCOM/CLEAR] Button (p 39, 45, 51, 52) ’ Navigator Key uxmml,Q) (P 15, 21, 27, 34, 44) Charge Contact (p 12) (Channel) Button (p 15, 21, 26,34,44,47) (m] Button (p 55) Charge Contact (p 12) [FLASH/CALL WAIT / PLAYBACK ) [...]

Displays Handset 2 @fYz2!q aThe display shows the dialed number, call status, programming options and directory items etc If you subscribe to a Caller ID service, caller information will I IIll be displayed (p 32) The number of new A calls will also be displayed 3 @JThe directory icon displays when storing or viewing the directory items (P 44, 47) [...]

Settings Connections from being disconnected Single-Line Telephone Jack (RJI 1C) Terone Line CordD Q Power Outlet (AC 120 V, 60 Hz) *USE ONLY WITH Panasonic AC ADAPTOR PQLVlO (Order No PQLVl OZ) *The AC adaptor must remain connected at all times (It is normal for the adaptor to feel warm during use ) *To connect a standard telephone on the same lin[...]

Battery Charge Place the handset on the base unit and charge for about 6 hours before initial use *The IN USE/CHARGE indicator lights and a beep sounds IN US lndica Battery strength You can check the battery strength on the handset display while the handset is on the base unit, while it is in use (making/answering a call etc ), or after viewing the[...]

I) Settings battery information After your Panasonic battery is fully charged (p 11) While in use (TALK) near the base unit* Up to 4 5 hours away from the base unit Up to 3 5 hours While not in use (Standby) I Uptoll days 1 *Within about 10 feet (3 m) l Battery life may be shortened depending on usage conditions, such as viewing the Caller ID Calle[...]

Selecting the Dialing Mode You can program the dialing mode using the handset near the base unit If you have touch tone service, set to “Tone” If rotary or pulse service is used, set to “Pulse” Your phone comes from the factory set to “Tone” Make sure the unit is in the standby mode initially. 1 2 3 4 5 6 7 Press (FUNCTI~N/EXIT/CH) Pres[...]

r) Settings Selecting the Line Mode If the line is connected to a low voltage system such as a PBX, set to “B” Otherwise the Call Waiting Caller ID Feature may not be used (p 54) Your phone comes from the factory set to “A” Use the handset near the base unit. Make sure the unit is in the standby mode initially. 1 2 3 4 5 6 7 Press (FUNCT~ON[...]

Programmable Functions You can program the following function items using the handset near the base unit The display shows the programming instructions See the corresponding pages for function details Make sure the unit is in the standby mode initially. Press (FUNCTI~N/EXIT/CH] <Function menu>* To store an item in the directory (p 44) Ringer [...]

e Programmable Functions Setting the Auto Talk Feature The Auto Talk feature allows you to answer a call by lifting the handset off the base unit without pressing (ml If you want to use this feature, turn the feature ON by programming Your phone comes from the factory set to OFF Make sure the unit is in the standby mode initially. 1 2 3 4 5 6 7 Pre[...]

Selecting the Ringer Volume With the handset You can set the handset ringer volume to HIGH, LOW or OFF If set to OFF, the handset will not ring Your phone comes from the factory set to HIGH Make sure the unit is in the standby mode initially. 1 Press (FUNCTI~NIEXITICH~ 2 Press @ or @ repeatedly until the arrow points to "Ringer volume" 3 [...]

I) Programmable Functions With the base unit You can set the base unit ringer volume to HIGH, LOW or OFF If set to OFF, the base unit will not ring Your phone comes from the factory set to HIGH Make sure the unit is in the standby mode initially (You can also select the ringer volume while a call is being received ) To select HIGH or LOW, press (HO[...]

Preparing the Answering System w Greeting Message You can record a personal greeting message of up to 2 minutes If a greeting message is not recorded, one of two pre-recorded greetings will be slaved when a call is received (II 201 irrg, incoming, etc ) are stored in cording time is about 15 minu To record a greeting message 1 Press and hold (GREET[...]

I) Preparing the Answering System To adjust the speaker volume: 9 levels (O-8) are available while using the answering system To increase, press &J To decrease, press @ Ex Level 8 Greeting message sample “Hello, this is (your name and/or number) Sorry I cannot take your call Please leave a message after the beep Thank you ” To erase the rec[...]

Programming Summary for the Answering System You can program the following functions using the handset near the base unit. Make sure the unit is in the standby mode initially. Press [FUNCTIONIEXITICH) v Press @ or @ to select “Program", and press FWD/EDIT (@ (Yes key) Press @I or @ to select “ TAD program", and press FWD/EDIT @ (Yes k[...]

I) Preparing the Answering System Day and Time Adjustment 1 2 3 4 5 6 7 8 Press (FUN~TI~N/EXITICH] Press @ or &J repeatedly until the arrow points to “ProgramV Press FWD/EDIT @ (Yes key) Press @ or @ repeatedly until the arrow points to "TAD program" Press FWD/EDIT @I (Yes key) *The base unit display shows programming options Press [...]

9 Press FWD/EDIT @ (Save key) *The unit announces the day/time The clock starts working *If 6 beeps sound, the setting is not correct Start again from step 5 *To return to the standby mode, press FUNCTION/EXIT/CH *In step 7, you cannot enter numbers greater than 12 Do not use military time. (To set 13 00 hours, enter “01 00”, and select “PM?[...]

I) Preparing the Answering System Selecting the Caller’s Recording Time You can select “1 minute”, “3 minutes” or “Greeting only” for the caller’s recording time Your phone comes from the factory set to “3 minutes” 1 Press [FUN~TIONIEXITKH) 2 Press @ or @ repeatedly until the arrow points to "Program" 3 Press FWINEDIT [...]

Selecting the Number of Rings You can select the number of times the unit rings before the answering system answers a call, from “2” to “7” or “Toll saver”* Your phone comes from the factory set to “Toll saver”* 1 Press (FUN~TI~N/E~IT/~H] 2 Press @ or @ repeatedly until the arrow points to "Program" 3 Press FWDIEDIT @ (Yes[...]

Making Calls With the Handset [TALK) QA3 [FUN~TI~N/EXIT/~H) (INTER~~M/~LEAR] (REDIAUPAUSE) 1 Press [TALK) I=-----1 2 Dial a phone number *The dialed number is displayed *After a few seconds, the display will show the length of the call and the battery strength ‘fl’.,,,,.,, 3 To hang up, press (TALK] or place the handset on the base unit I::i,,,[...]

To dial after confirming the entered number 1 Dial a phone number @If you misdial, press INTERCOM/CLEAR and dial again 2 Press (TALK] *After a few seconds, the display will show the length of the call and the battery strength 3334444 3 To hang up, press (m) or place the handset on the base unit To redial after confirming the last number dialed Pres[...]

e Making Calls With the Base Unit (Digital Duplex Speakerphone) (REDIAUPAUSE) 1 2 3 4 M.IC and Indicator Press (DIGITAL sp-PHONE) *The DIGITAL SP-PHONE indicator lights Dial a phone number When the other patty answers, talk into the MIC (microphone) To hang up, press ( DI G ITAL SP-PHONE) *The indicator light goes out Off 00-00-00 *To switch to the[...]

Hands-free Digital Duplex Speakerphone For best performance, please note the following *Talk alternately with the caller in a quiet room *If the other party has difficulty hearing you, press @ to decrease the speaker volume *If the other party’s voice from the speaker cuts in/out during a conversation, press @I to decrease the speaker volume To a[...]

I) Making Calls Simultaneous Keypad Dialing You can use the base unit like a standard telephone After pressing (m] to make a call with the handset near the base unit, you can also dial using the base unit keypad 1 2 3 Handset Press (TALK] Base unit Dial a telephone number while hearing a dial tone on the handset *When the other party answers, talk [...]

Answering Calls When a call is received, the unit rings, "Incoming call" is displayed and the CALLER ID indicator flashes quickly If you subscribe to a Caller ID service, the calling party information will be displayed after the first ring (p 32) In order to view the Caller ID information, please wait until the second ring to answer a cal[...]

Caller ID Service This unit is compatible with a Caller ID service offered by your telephone company If you subscribe to a Caller ID service, the calling party’s information will be shown on the handset and base unit displays after the first ring The unit can record information of up to 50 different callers in the Caller List The Caller List info[...]

*Caller information cannot be displayed in the following cases -If the caller dialed from an area which does not provide a Caller ID service, the display will show “Out of area" --If the caller has requested not to display his/her information, the display will show “Private caller" *If your unit is connected to a PBX which does not su[...]

Using the Caller List Viewing the Caller List You can view the caller list with the handset or the base unit Caller List information includes the caller’s name and phone number, the time and date the call was received, and the number of times that caller called (P 35) Make sure the unit is in the standby mode initially. With the handset 1 Press @[...]

What “4” means When the display shows ‘V”, you have already viewed this calling information, answered the call, called back the caller or played back the message (p 57) If the same caller calls again, the call entry with “4” will be replaced with the new call entry If a caller calls more than once The number of times the same caller cal[...]

I) Using the Caller List Editing the Caller’s Phone Number You can edit a phone number into one of 4 patterns using the handset or the base unit Make sure the unit is in the standby mode initially. With the handset 1 2 3 4 5 Press @ or @ to enter the Caller List E Press @ or @ repeatedly to find the desired caller, and press FWD/EDIT @ 11:20A JAN[...]

With the base unit 1 Press Q or @ to enter the Caller List 2 Press Q or Q repeatedly to find the desired caller 3 Press (GREETING/EDIT] to select a pattern *Each time you press GREETING/EDIT , the number is rearranged into one of 4 different patterns *The order in which patterns 0-a are displayed depends on how the telephone number is displayed in [...]

I) Using the Caller List Storing Caller List Information in the Directory You can store names and phone numbers that are in the Caller List into the directory Storing must be carried out with the handset. Make sure the unit is in the standby mode initially. 1 Press @ or @ to enter the Caller List 2 Press @ or @ repeatedly to find the caller you wan[...]

Erasing Caller List Information After checking the Caller List, you can erase some or all of the entries with the handset or the base unit Make sure the unit is in the standby mode initially. To erase a specific caller from the Caller List With the handset: 1 EE;;-@;;;;;;;;, 2 Press @I or @I repeatedly to find the caller you want to erase from the [...]

II) Using the Caller List To erase all entries in the Caller List Before erasing all entries, make sure that “0 new call" is displayed 3 Press Q or @ to select ‘All clear" 4 Press FWD/EDIT @ (Yes key) or (INTERC~M/CLEAR] I All clear I *A beep sounds and all entries are erased 3 Press FJ or Q to select “All cleaF *A beep sounds and a[...]

One-Touch Dialer You can store a phone number in the [DIRECT) button of the handset The stored number is dialed with a one-touch operation Storing a Phone Number in the DIRECT Button Make sure the unit is in the standby mode initially. 1 Press (FUNCTIONIEXITICH) 2 Press @ or &J repeatedly until the arrow points to "Program" 3 Press FW[...]

q One Touch Dialer Dialing the Stored Number in the DIRECT Button 1 Press [DIRECT] *The stored number is displayed 1234567890123456 789012 2 Press (TALK] l The number is dialed *You can also dial the stored number by pressing [TALK) then pressing (-1 (If your line has rotary or pulse service, any access numbers stored after pressing (TONE] will not[...]

Using the Directory You can store up to 50 names and phone numbers in the directory using the handset All directory items are sorted by the first word in alphabetical order Using the directory, you can make a call by selecting a name on the handset or base unit display Storing Names and Numbers in the Directory Storing must be carried out with the [...]

e Using the Directory 1 Press (FUNCTI~N/EXIT/CH) 2 While the arrow points to “Save directory", press FWDIEDIT @I (Yes key) *The display shows the number of stored items in the directory 3 Enter a name, up to 15 characters using the dialing buttons (p 45) *To move the cursor, press BACK @ or FWD/EDIT @ *If a name is not required, press @ (Nex[...]

Selecting Characters to Enter Names The handset dialing buttons (@ to @), BACK @I and FWD/EDIT @ can be used to enter letters and symbols The letters are printed on the dialing buttons Pressina each button selects a character as shown below W 0 To To move the cursor to the left move the cursor to the right *To enter another character using the same[...]

I) Using the Directory For example, to enter “Tom Jones”: 1 2 3 4 5 6 7 8 9 Press (FUNCTIONIEXITI~H) While the arrow points to “save directory", press FWD/EDIT @ (Yes key) Press (SJ Press @ six times, then press FWD/EDIT (@ to move the cursor to the right Press @I four times To Tom Press FWD/EDIT @ twice to enter a blank Tom Press Q Tom [...]

Finding Items in the Directory You can search the directory using the handset or the base unit Make sure the unit is in the standby mode initially. With the handset 3 Press l?J or &I repeatedly until the desired item is displayed *All directory items are stored in the order shown on the right To search for a name by initial @ Press the dialing [...]

I) Using the Directory With the base unit 1 2 3 Press &I or Q to enter the directory list Ei Press @ or Q *The first item is displayed E Press @I or @ repeatedly until the desired item is displayed *All directory items are stored in the order shown on the right To search for a name by initial @ Press the dialing button for the first letter of t[...]

Index table Dialing from the Directory Make sure the unit is in the standby mode initially. With the handset With the base unit 1 Press BACK @ or FWD/EDIT &J to enter the directory list Directory list VA b=Caller's list 2 Press FJ or Q *The first item is displayed 3 Press @ or @ repeatedly to find the directory item that you want to dial *[...]

I) Using the Directory Editing an Item in the Directory Programming must be carried out with the handset. Make sure the unit is in the standby mode initially. 1 2 3 4 5 6 7 8 Press BACK @ or FWD/EDIT @ to enter the directory list Press Q or Q *The first item is displayed Press @ or @ repeatedly to find the directory item you want to change, and pre[...]

Erasing an Item from the Directory You can erase an item using the handset or the base unit Make sure the unit is in the standby mode initially. With the handset 1 Press BACK @ or FWD/EDIT @ to enter the directory list With the base unit 1 Press @J or @J to enter the directory list 2 Press Q or &J *The first item is displayed 3 Press m or &[...]

Intercom A 2-way intercom is possible between the handset and the base unit Paging the base unit from the handset 1 2 3 Handset Press [INTERC~M/CLEARI Talk to the paged party after the beeps *“Intercom" is displayed Base unit When the other party’s voice is heard, answer using the MIC Handset To end the intercom, press (INTERcOM/CLEARI (IN[...]

During an intercom call: *Intercom calls can only be ended with the handset *If the handset user has difficulty hearing the base unit user, decrease the base unit speaker volume by pressing @ on the base unit *If an incoming call is received, the intercom call stops and the unit starts to ring To answer, press (TALK) or [DIGITAL SP-PHONE) Transferr[...]

Special Features Automatic Security Code Setting Each time you place the handset on the base unit, the unit automatically selects one of more than a million security codes These codes help prevent the unauthorized use of your telephone line by another cordless telephone user For Call Waiting Service Users Press (FLASH/CALL WAIT/PLAYBACK) or [CALL W[...]

Temporary Tone Dialing (For Rotary or Pulse Service Users) Press (TONE) before entering access numbers which require tone dialing *The dialing mode changes to tone You can enter numbers to access an answering service, electronic banking service, etc When you hang up, the mode will return to pulse *Access numbers entered after pressing (m) will not [...]

Automatic Answering Operation When the unit answers a call, a greeting message is played and the caller’s message is recorded While recording, “- Answering -" will flash on the base unit display Setting the Unit to Answer Calls *The indicator lights and “Answer set” is heard *The unit will announce the remaining recording time if it is[...]

Listening to Messages You can see the total number of recorded messages on the base unit display If the ANSWER ON indicator flashes, new messages have been recorded Listening to only new messages Press (NEW MESSAGE) briefly *The unit announces the number of new messages and plays them back Listening to all recorded messages Press and hold [NEW MESS[...]

r) Listening to Messages For Caller ID service users (p 32) During playback, the base unit display will show the name and/or number of the caller whose message is being played To call back the displayed number: During playback, lift the handset and press (TALK] within 10 seconds, or press [ DI G ITAL SP-PHONE) *The unit stops playback and automatic[...]

Erasing Messages The unit will announce the remaining recording time after playback, if it is less than 5 minutes New messages cannot be recorded when -“Memory full” is heard -“Message full” flashes on the base unit display -the ANSWER ON indicator flashes rapidly Erase some, or all, of the messages We recommend you erase unnecessary messag[...]

Remote Operation from a Touch Tone Phone You can operate the answering system from any touch tone phone A synthesized voice menu will guide you on how to operate the unit *To skip the voice menu and operate the I- unit directly, see page 64 Summary of remote operation ( P 62) Call your unit from a touch tone phone + Enter your remote code (p 61) du[...]

Setting the Remote Code The remote code prevents unauthorized people from accessing your unit and listening to your messages Choose any 24git number (00-99) The factory preset remote code is “11” If you do not program your own remote code, you can use “11” Use the handset near the base unit. Make sure the unit is in the standby mode initial[...]

I) Remote Operation from a Touch Tone Phone Voice Menu The shaded boxes are voice prompts Press 1 to play back all messages *[*-s[Fjm t Press Q [J Press 1 to play back new messages $ Press Q Press CiJ Press @ 62[...]

/ All Message Playback All recorded messages are played back At the end of the last message, “End of final message” is heard The unit will announce the remaining recording time if it is less than 5 minutes L I New Message Playback e Only new messages are played back At the end of the last message, “End of final message” is heard The unit [...]

* Remote Operation from a Touch Tone Phone Direct Remote Operation Once you have entered the remote code, you can also control your unit by direct commands instead of using the voice menu To end the remote operation, hang up anytime Direct commands NEW MESSAGE 0 4 *Only new messages are played back PLAY BACK ALL MESSAGE PLAY BACK *All messages are [...]

ANSWERING SYSTEM OFF @I *The unit hangs up and will not answer calls until turned on again Turning on the answering system Call your unit and wait for 15 rings *The unit will answer and the greeting message will be played *The answering system will turn on Hang up or enter the remote code for other options *When turning on the answering system usin[...]

Remote Operation with the Handset You can operate your answering system with the handset The announcements and recorded messages can only be heard with the handset (FLASH/CALL WAIT / PLAYBACK ] Summary of remote operation Press (FLASH/CALL WAIT~PLAYBACK] *The number of new messages is heard *“Remote operation" is displayed on the handset Ent[...]

Direct commands NEW MESSAGE 0 4 *Only new messages are played back PLAY BACK ALL MESSAGE PLAY BACK 0 5 *All messages are played back REPEAT 0 1 *The current message is repeated (During playback) *You can also press BACK @ to repeat a message SKIP (During playback) 0 2 *The current message is skipped The next message is played *YOU can also press FW[...]

Wall Mounting This unit can be mounted on a wall phone plate 1 Adjust the angle of the cradle I @Slide the lock switch to “RELEASE” @Rotate the cradle 90” until it faces straight @%de the lock switch to “LOCK” with the cradle facing straight up 2 Connect the AC adaptor 3 @Tuck the telephone line cord inside the wall mounting adaptor @Conn[...]

4 Connect the telephone line cord Mount the unit, then slide down *Raise the antennas 5 To charge the handset battery: Place the handset in the cradle as shown *The IN USE/CHARGE indicator lights IN USE/CHARGE Indicator 69[...]

Using the Belt Clip You can hang the handset on your belt or pocket using the belt clip To attach the belt clip To remove the belt clip Using an Optional Headset Plugging an optional headset into the handset allows a hands-free phone conversation Please use only the Panasonic KX-TCA88 headset To order call the accessories telephone number on page 2[...]

Battery Replacement If "Recharge battery" is displayed and/or “ 1 I 1” flashes after being fully charged, replace the battery with a new Panasonic P-P510 (N4HKGMBOOOOl) battery To order, call the accessories telephone number on page 2 1 2 3 4 Carefully insert a flat metal object in the slot, and push forward to release the lock Remove[...]

If the Following Appear... If the unit detects a problem, one of the following messages will be displayed on the handset or the base unit Handset display Not available The battery needs to be charged Place the handset on the base unit to charge the battery (P 11) The handset has lost communication with the base unit Place the handset on the base un[...]

Base unit display When the clock needs adjusting, the day and time flashes with “a” Adjust the clock (p 22) Your greeting message was not recorded correctly Record it again (p 19) If message memory is full, ‘Message full" will flash Erase some, or all, of the messages The display will be shown when the handset is[...]

Before Requesting Help Cordless Telephone Problem Remedv "No link to base. *You are too far from the base unit Move Place on cradle and closer and try again try again. ” is displayed *Place the handset on the base unit and and an alarm tone sounds try again *Plug in the AC adaptor *Raise the base unit antennas Static, sound cuts in/out, fade[...]

Problem Remedy The unit does not display the *YOU need to subscribe to a Caller ID caller’s name and/or phone service from a telephone company number *Other telephone equipment may be interfering with your phone Disconnect it and try again *Other electrical appliances connected to the same outlet may be interfering with the Caller ID information [...]

I) Before Requesting Help Problem Remedy You cannot have a conversation using the handset *When the headset is connected (p 70), you must use the headset to talk with the caller To have a normal cordless phone conversation, disconnect the headset You cannot have a conversation using the headset *Make sure that the headset is connected prw-b ( P 79)[...]

Problem Remedy You cannot operate the answering system with the handset *Someone is operating the answering system *You are too far from the base unit Move closer to the base unit *The unit is recording a message To answer the call, press (TALKJ While recording a greeting message, the unit starts to ring and stops recording *To answer the call, pre[...]

I) Before Requesting Help General Problem Remedy The unit does not work *Check the settings (p 10-14) *Charge the battery fully (p 11) *Clean the charge contacts and charge again (p 12) *Install the battery properly (p 71) *Place the handset on the base unit and unplug the AC adaptor to reset Plug in, and try again l Re-install the battery and plac[...]

Problem Remedy The IN USE/CHARGE indicator light does not go out while charging *This is normal If you cannot solve your problem *Call our customer call center at l-800-21 1 -PANA(7262) *Panasonic’s e-mail address for customer inquiries consumerproducts@panasonic corn for customers in the USA or Puerto Rico ONLY Adding Another Phone This unit wil[...]

Important Safety Instructions When using this unit, basic safety precautions should always be followed to reduce the risk of fire, electric shock, or personal injury 7 8 9 10 11 12 13 14 80 Read and understand all instructions Follow all warnings and instructions marked on this unit Unplug this unit from AC outlets before cleaning Do not use liquid[...]

CAUTION: To reduce the risk of fire or injury to persons, read and follow these instructions 1 Use only the battery(ies) specified 2 Do not dispose of the battery(ies) in a fire They may explode Check with local waste management codes for special disposal instructions 3 Do not open or mutilate the battery(ies) Released electrolyte is corrosive and [...]

FCC and Other Information If requested by the telephone company, inform them as follows FCC Registration No (found on the bottom of the unit) Ringer Equivalence OIB The particular telephone line to which the equipment is connected This unit must not be connected to a coin operated line If you are on a party line, check with your local telephone com[...]

CAUTION: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this device Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable prot[...]

For product service *Panasonic Servicenters are listed in the servicenter directory *Call l-800-21 1 -PANA(7262) for the location of an authorized servicenter aPanasonic’s e-mail address for customer inquiries consumerproducts@panasonic corn for customers in the USA or Puerto Rico ONLY When you ship the product *Carefully pack your unit, preferab[...]

one 0 Wall Mounting Adaptor How to Set Up the Unit 1 Connect as shown. The AC Adaptor must remain connected 2 For maximum distance and noise-free operation, place the base unit in a HIGH and CENTRAL location with no obstructions or interference from electrical appliances Charge the battery for about 6 hours before initial use. Place the handset on [...]

How to Operate the Unit Raise the base unit antennas for best reception. Display (FUNCTI~N/E~~TICH) (FUNCTI~N/E~~TICH) [INTERCOM/CLEAR) ANSWER ON ANSWER ON lndicato lndicato IN USE/CHARGE lndicat IN USE/CHARGE lndicat CALLER ID lndicato CALLER ID lndicato (GREETING/EDIT II Charge Contacts I I I (D I G ITA L w-PHONE) MIC (Microphone) (STOPIEXIT] JEW[...]

With thghandset 7 Press ITALKJ. 2 Dial a phone number 3 To hang up, press (m] or place the handset on the base unit. *To dial after confirming the entered number, enter a phone number and press I=]. *If noise Interferes with the conversation, press FUNCTIONIEXITICH to select a clearer channel or move closer to the base unit. *To select the recerver[...]

Using the Directory You can store up to 50 names and phone numbers In the directory All directory items are sorted by the first word In alphabetical order Using the directory, you can make a call by selecting a name on the handset or base unit display To store names and phone numbers in the directory Use the handset near the base unit. Make sure th[...]

With the base unit 7 Press @I or @ to enter the directory list. 2 Press Q or Q. 3 Press @ or &I repeatedly to find the desired item. *To search for a name by Initial: Press the dialing button for the first letter of the desired name until any name with the same initial IS displayed. Press @ until the name IS displayed. 4 Press ( DI G ITAL w-PHo[...]

You can check who has called as follows. Ex. When you search from the most recent call: With the handset 1 Press FJ or Q. 2 Press #J repeatedly to find the desired caller elf there IS no name rnformation for a caller, the display will only show the phone number. *To return to the prevrous caller, press @. *When “b=Dxectory" IS displayed, you[...]

You can program the followrng functions using the handset near the base unit. The base unit display shows programmrng options or settings. Make sure the unit IS In the standby mode initially @ Setting the day/time (FUN~TIONIEXITICH) + Q or @ to select “Program" + I) FWD/EDIT @ ( Y es key) + @I or @ to select “ TAD program" + I) FWD/ED[...]

Recording a Greeting Message You can record a personal greeting message of up to 2 minutes. All messages (greeting, Incoming, etc.) are stored In digital memory The total recording time IS about 15 minutes. Press and hold (GREETING/EDIT) until a beep IS heard. Talk Into the MIC. When finrshed, press (STOP/EXITJ. *To check the greeting message, pres[...]

Caution-To comply with FCC RF exposure requirements, the base unit should be rnstalled with its antenna located at 20 cm or more from persons and handset should be carned with the specific belt-clip provided for the handset to ensure compliance. Other non-tested belt-clips or similar body-worn accessones may not comply, therefore, should be avoided[...]

3AB3311 IINH AlldUUOld IlNOdSIll LOOZ-LUU-008-L 3N1710H NV7d 3WD kWVOlSn3 33M-7701 ElflO JO 33N3IN3AN03 3H13Sn ipa.l!dXa SBLj h&ll?JJEM /(JO&3lZ~ ayj .~aue pnpold q~o.wa~a .moA 40 ameuuoyad doI panuguo3 sansse i~yl uqd S~!AJEJS papualxa Uij Hwuolsnj AlNO VSfl WI- all 1 BUSINESS REPLY MAIL ) FIRST-CLASS MAIL PERMIT NO 110 ELGIN IL POSTAGE WI[...]

THE CUSTOMER CARE PLAN OFFERS ALL OF THESE OUTSTANDING BENEFITS: q Labor to complete repairs 0 Replacement parts o Electronic or mechanical adjustments q Specified internal cleaning q Requested preventive maintenance q No hidden charges or deductibles Complete coverage for one low, up-front price q Coverage is transferable Service is performed by o[...]