Panasonic Multimedia Projection Display инструкция обслуживания

PT - 50L C 1 3 LSQT0738B Multimedia P rojection Displa y Operating Ins t ructions F or assistanc e, please call : 1 - 888 -VIEW PT V(84 3- 97 88) or send e-mail to : consumerproducts@panasonic.com or visit us at www .panasonic.com (USA) Three Impor tant Reasons to Register Y our Pro du c t I mm e di at el y! 1 Protect Y our New I nv e stme nt ... R[...]

2 For assistanc e, please call : 1- 88 8 -VIEW P T V( 84 3 - 9788) Note to C A T V System Installer: This reminder is provided to call t he CA T V system installer ’ s at tention to Ar ticle 820 - 40 of the N EC that pro vides guidelines for proper grounding and, in par ticular , speci fi es that the c able ground shall be connec ted to the grou[...]

3 Getting Start ed The lamp has a maximum life of about 10 000 hours. If use exceeds this fi gure, the possibility of lamp damage becomes greater . The lamp should be changed as soon as possible once the lamp warning message appears. If the lamp is damaged, please contact your nearest dealer . Due to the characteristics and use conditions of in di[...]

4 For assistanc e, please call : 1- 88 8 -VIEW P T V( 84 3 - 9788) W elcome to the Pana sonic family of cu stomers. W e hope th at you will ha ve man y years of e njoyment f rom yo ur ne w proj ection displ a y . T o obtain maxim um bene fi t f rom you r set, please re ad the se Instr uct ions before ma king a ny a djustm ents, an d retain them fo[...]

5 Getting Start ed To Start ! Use Now ! Enjoy More ! Other Information ! Getting Start ed T able of C onte nt s Basic Operation Advanced Op er a tion Information Important Safety Instructions.......................................................................................... 2 Optional E xter nal Equipment ....................................[...]

6 For assistanc e, please call : 1- 88 8 -VIEW P T V( 84 3 - 9788) R ecei v er L ocatio n This projection display is intended to be used wit h an op tional stand or enter tainment c enter . Consult your dealer for avail abl e o pti ons . Locate for c omfor table viewing. Avoid placing wher e sunlight or other bright light (including re fl ections)[...]

7 Getting Start ed A cc essories Requires t wo A A bat teries (supplied). 1 . T urn the T ransmit ter face down. Rem ove to p c over by pr es sin g down on mark ing and sliding cover of f in the direct ion indicated. 2. Install the bat teries as shown in the bat tery c ompar tment. (Polarit y + or - must match the markings in t he compar t ment ) .[...]

8 For assistanc e, please call : 1- 88 8 -VIEW P T V( 84 3 - 9788) Number keys When 6 is pressed, channel 6 is dis played in single screen. (P . 3 1 ) Illumi nated Remote C ontrol POWER button Press to turn t he projection display ON or OFF . (P . 22) MUTE button Press this but ton to mute the sound. ( P . 36) Mode Selection buttons Selects the ope[...]

9 Getting Start ed ASPECT button Changes the way the image is display e d. (P . 32) Light button Lights all buttons. T he selected mode but ton (T V , V CR , etc. ) fl ashes. TV/VIDEO button T oggles bet ween T V and VIDEO inputs. ( P . 35) Re duce s volu me. Changes to the next c hannel up . Increase volume. The sc reen below is display e d for 5[...]

10 For assistanc e, please call : 1- 88 8 -VIEW P T V( 84 3 - 9788) Con t r ols and T erminals on the pro jection displa y < FR ON T > LAM P i nd i ca to r This indicator lights up w hen there is a malfunct ion with the lamp unit. (P . 76) TEMP indicat or This indicator lights up w hen there is an abnormal tem per a ture in the unit. (P . 76)[...]

11 Getting Start ed < R EA R > VHF/UHF terminal (PP . 1 2- 1 4 ) Ve n t Note: Make sure the vents are not blocked. (This could cause damage.) Loc ati on of Cont rols Ve n t Component signal input 1- 4 ter mi nals (P . 16) AV out terminals (P . 1 7) Input 1, 2 ter mi nals (P . 15) RG B Input 1 terminal (PP . 1 8- 19 ) D igital Input ter minal [...]

12 For assistanc e, please call : 1- 88 8 -VIEW P T V( 84 3 - 9788) Co nnecting the Anten na / Cable to the RF in T er mi nal (No V CR) Antenna Connect ion For prop er rec ept ion of V HF / UHF c hann els, an ex ter nal a ntenn a is req uired . For best re cep tion a n outd oor ant enna is r eco mmen ded . When using “Nut type” RF coaxial cable[...]

13 Getting Start ed Cabl e Conn ec tion Use thi s con fi gura tion w hen co nnec ting t he proj ect ion di splay to a c abl e T V system. Notes: • Certain cable systems offset some channels to reduce interference or have Premium (scrambled) channels. A cable converter box is required for proper reception. Check with your local Cable company for [...]

14 For assistanc e, please call : 1- 88 8 -VIEW P T V( 84 3 - 9788) Use thi s con fi gura tion w hen con nec ting t he proj ect ion disp lay to a ca ble T V syste m using VCR. Note: When the RF coaxial cable is connected to the projection display VHF/UHF terminal via a cable box or VCR, set the TV channel to CH3 or CH4. This does not apply when si[...]

15 Getting Start ed Ho w to connect the “ 1 , 2, 3” Input T er mi nals Connects VC Rs and other p eripheral equipment Similar connec tions are available at the INPUT 1, 2, 3 input terminals. Notes: • Similar connections are available at the INPUT 1, 2, 3 input terminals. • Input 3 is located on the side of the unit. • Select the desired V[...]

16 For assistanc e, please call : 1- 88 8 -VIEW P T V( 84 3 - 9788) Ho w to con nect the C OMPONEN T VIDEO In put T er mi nals Notes: • Similar connections are available at the COMPONENT VIDEO INPUT 1-4 T erminals. • Select the desired COMPONENT VIDEO INPUT position by pressing the TV/VIDEO button. (P . 35) • Component video signals that can [...]

17 Getting Start ed Ho w to connect the A V Out T erminals The “ AV Out ” T erm inals ou tpu t the sa me sig nals a s the m ain pic ture on t he p rojec tion di splay scr een an d sound f rom th e spea ker at th at tim e, e.g. T V pro gra ms or sig nals f rom IN PUT 1 , 2 , 3 te rmin als. Notes: • Never connect the VIDEO IN and OUT terminals [...]

18 For assistanc e, please call : 1- 88 8 -VIEW P T V( 84 3 - 9788) RGB OUT AUDIO OUT COMPU TER Ho w to connect the R GB IN T erminals Notes: • Some PC models cannot be connected to the set. A conversion adapter is required to use the RGB cable (D-SUB 15P) to connect a Macintosh computer to the set. There is no need to use an adapter for computer[...]

19 Getting Start ed Installation RGB OUT AUDIO OUT Connecting a DTV Decod er to R GB I N RG B cable (D - SUB 15P ) Audio cable Notes: • Select the desired RGB input position by pressing the PC/MENU or TV/VIDEO button. (P . 35) • Similar connections are available at the RGB IN 1, 2 T erminals. M3 st ereo m in i pin DTV De coder[...]

20 For assistanc e, please call : 1- 88 8 -VIEW P T V( 84 3 - 9788) DIGIT AL IN T er minal P in Lay out s Connect ion por t view 81 16 17 9 24 Pin No. Signal name 1T . M . D . S D a t a 2 - 2T . M . D . S D a t a 2 + 3 T .M. D .S Dat a 2 Shield 4N C 5N C 6D D C C l o c k 7D D C D a t a 8N C 9T . M . D . S D a t a 1 - 10 T . M . D. S D a t a 1+ 11 T[...]

21 Getting Start ed R GB / DIGIT AL IN signals that can be input The t able b elow li sts t he dif f erent t yp es of RGB / DI GIT A L IN sig nals t hat c an be inp ut . If a si gnal w hich di f fer s great ly fro m any of the t yp es list ed be low is inpu t , the p ictu re ima ge may not b e dis played co rre ctl y , o r a blac k bac kground may [...]

22 For assistanc e, please call : 1- 88 8 -VIEW P T V( 84 3 - 9788) Press the POWER but ton to turn the projection display on. (Refer to page 23 for “ T urning the Power ON and OFF ” .) Automatic Channel Setting is per formed. First , ch eck t he conn ect ion of t he Plug to t he Wall O utl et and t he Ant enna /Ca ble t o the R F in T er minal[...]

23 Basic Operation Always be sure to follow the proc edure given belo w to turn the project ion display power ON and OFF . • The lamp cooling fan will continue to operate for approximately 1 minute after the power is turned off. At the same time, the POWER indicator will blink Red. Press POWER on project ion display or remo te c ontrol to turn po[...]

24 For assistanc e, please call : 1- 88 8 -VIEW P T V( 84 3 - 9788) 2 Use the ▲ , ▼ but tons to select an item. Selec t MENU desired by pushing Lef t “ ◄ ” button or Right “ ► ” but ton. Use the ACTION but ton to set or go to ne x t menu screen. Pressing the ACT IO N but ton displa ys t he MENU scree n. Note: Depending on the signal[...]

25 Basic Operation Returning to the previous screen If RECALL is pressed w hile a menu screen is displayed , t he display will return to the previous screen. Adjust items Set an item INF O RMA T I O N s cr ee n P. 6 1 LA NG U A GE sel e ction scre en P. 6 1 CAPT ION menu V IDEO menu PP . 56-5 9 PP . 5 2- 53 CHA N N EL menu PP . 26-2 9 , 54 - 55 POS[...]

26 For assistanc e, please call : 1- 88 8 -VIEW P T V( 84 3 - 9788) Autom atic ally se arch es and a dds r ecei vable c hanne ls to me mor y. Press the ACTION but ton to display the MENU screen and selec t SET UP . Press to select CHAN NEL. Press to display the CH AN NEL. Press to select TV o r C AB L E. Press to select ANTE NNA. Press to select AU[...]

27 Basic Operation Notes: • After AUTO SET is fi nished, the lowest channel number added will be received. • Some channels with very weak signals may be locked into memory . If desired, these channels can be deleted man u al ly using the MANUAL SET feature. 4 Case 1 Case 2 When setup is complete, the lowest channel pict ure appears. If setup i[...]

28 For assistanc e, please call : 1- 88 8 -VIEW P T V( 84 3 - 9788) Use thi s set ting w hen cha nging set t ing of rec eiving c hanne ls or cha nging t he cha nnel di s play . 3 Press to select MANU AL SE T . Press to display the M ANUA L SET screen. Press the ACTION but ton to display the MENU screen and selec t SET UP . Press to select CHAN NEL.[...]

29 Basic Operation 4 Press to select c hannel. Repeat steps 4 to continue adding or deleting channels. Press to add channels to memor y . Press to select c hannel. Press to delete channels from memor y . Press to exit menu. Note: Some channels with very weak signals may be locked into memory . If desired, these channels can be deleted manually usin[...]

30 For assistanc e, please call : 1- 88 8 -VIEW P T V( 84 3 - 9788) Operation c an be done from the projection display . Press to select the desired volu me lev el. Press to select the desired channel. (Or use number keys ) Press to turn t he projection display on. Press to operate the projection display with the remote control. 1 2 3 4 Notes: • [...]

31 Basic Operation Auto sh ut of f T o extend lamp life, if there is no signal to the set ’ s tuner for 5 minutes, the lamp will shut of f automati cally . Asp ect t y p es (P . 3 2) Rec eivable broad cast t y pes (P . 3 7) Chan ne l Chan ne l caption (P . 54 ) T V status display Using the num be r keys Example 1: T o select channel 1 25, fi r s[...]

32 For assistanc e, please call : 1- 88 8 -VIEW P T V( 84 3 - 9788) The co lor moni tor wi ll allow you to enjoy viewin g the p ictu re at it s ma ximum si ze, inclu ding wi de scre en cinema format picture. The aspect mode c hanges each time the ASPECT button is pres sed. Notes: • When a 1080i or 720p signal is being received, the mode is set to[...]

33 Basic Operation Notes: • The screen size changes if ID-1 is detected. (P . 57) • When ASPECT is in ZOOM mode, PIP feature cannot be used. (P . 40) ASPEC T C o nt ro ls Mode Picture Ex pla na tion NORMAL NOR MA L will display a 4:3 picture at its stand ard 4:3 size. JUST JUST mode will display a 4:3 picture at max i mum size but wit h aspect [...]

34 For assistanc e, please call : 1- 88 8 -VIEW P T V( 84 3 - 9788) When the SE A RCH / OPEN /C L OS E button is presse d during single screen. When a channel but ton is pressed during channel search. Sound from t he left sc reen is output from t he speak er s on the projection display set. Chann el searc h disp lays each c hann el, in ord er , as [...]

35 Basic Operation VC R DV D p l a ye r This equipment can also be co n nect ed to the rear terminals. See Connec tions for details. T ur ning the power on and s witching input mod es T urn the projection display on. 1 2 The input mo de changes each time this but ton is pressed. * No input mode is displayed for terminals with no equipment con nect [...]

36 For assistanc e, please call : 1- 88 8 -VIEW P T V( 84 3 - 9788) Press this but ton to mute the sound. Press again to reactivate sound. Sound is als o reactivated when p ower is turned of f or volume level is changed. Projection c an be switched bet ween a frozen (still) picture and a moving picture each t ime the FREEZE button on t he remote co[...]

37 Basic Operation The following are pos sible broadcast t ypes with t hei r acc ompanying on- screen displays. The signal being received is indic ated with a “ ” mar k while the se lec t ed audio mode is indic ated with an ar row . T o change the audio mode for these broadc asts, fol low t he “Selec t Audio Mode for T V V iewing” sec tion [...]

38 For assistanc e, please call : 1- 88 8 -VIEW P T V( 84 3 - 9788) Notes: • Sound from the Left screen is output from the speakers on the projection display set. • When the screen is split, signals of the Left screen are output from the rear monitor output terminal. • The left and right screens are processed by individual circuits and, there[...]

39 Basic Operation Swapping lef t and right screens Example: Du r i ng SP LI T SCR EEN NOR M A L Changing the channel of the right screen Press to swap. Example: Du r i ng SP LI T SCR EEN NOR M A L Note: When outside input is fi nished, the low est reg is tered c han nel number is displayed. F or fast er selection, press the SWAP but ton to change[...]

40 For assistanc e, please call : 1- 88 8 -VIEW P T V( 84 3 - 9788) Y ou can view t wo pictures simult aneously using t wo tuners and pic ture in picture ( PIP ) display function. Display P IP screen Press to split (T he previously selected screen appears on the M ain. ) • Returning to one screen. Press to return. Main scree n ( Mai n pic tu re )[...]

41 Basic Operation Swapping Main and PIP screens Press to swap. Changing the channel of the PIP screen Mov e PIP screen Y ou can move the PIP screen to four po si tions. Press re peat ed ly to select PIP position. Press to select the desire d channel. Example: Du r i ng Main sc reen NOR M AL Example: Du r i ng Main sc reen NOR M AL Select ing the s[...]

42 For assistanc e, please call : 1- 88 8 -VIEW P T V( 84 3 - 9788) 4 Press the ACTION but ton to display the MENU screen and selec t ADJU ST . Press to select POSITION / SIZE. Press to display POSITION / SIZE. Press to adjust PO SI TI ON / SIZE. 2 3 Press to select the sc reen mode. 1 R GB input (D I GIT AL IN: H PO SITI ON / V POSITION only ) ZOO[...]

43 Advanced Op er a tion Notes: • This projection display is equipped with various screen modes. If a screen mode with a different aspect from the broad cast program is selected, image will appear differently . Select the proper screen mode with this in mind. • Be careful when using this projection display for commercial purposes or for public [...]

44 For assistanc e, please call : 1- 88 8 -VIEW P T V( 84 3 - 9788) 1 Press the ACTION but ton to display the MENU screen and selec t AD JUST . 2 Press to select AU DI O. Press to display AUDIO screen. 3 Press to select the menu to set each item. The sound level is au to mat i cal ly adjusted to suit the program sourc e. Emits the original sound. S[...]

45 Advanced Op er a tion Adjust the desired level b y listening to the sound. BASS Adjusts low sounds TREBLE Adjusts high sounds BALANCE Adjusts lef t and right volu mes 1 Repeat step 1 on page 44. 2 Press to select AUDIO A DJUST . Press to display AUDIO AD JUST screen. Press to select the menu to set each item. 3 Using BBE NOR MA L is displayed at[...]

46 For assistanc e, please call : 1- 88 8 -VIEW P T V( 84 3 - 9788) W ARM Warm co lor (more red ) Ideal for movies in low lighting c onditi ons. CINEMA See next page Note: There is little change when PICTURE is increased with a bright picture or reduced with a dark picture. 1 Press the ACTION but ton to display the MENU screen and selec t AD JUST .[...]

47 Advanced Op er a tion Adjust to desired level while viewing picture through the menu overlay . 2 Press to select PICTU RE A DJUST . Press to display PICTURE A DJU ST screen. Press to select the menu to set each item. 3 1 Repeat step 1 on page 46. Press to exit menu. 4 R GB/ DIG I T A L I N input NOR MA L returns all items to factor y default s. [...]

48 For assistanc e, please call : 1- 88 8 -VIEW P T V( 84 3 - 9788) Press the ACTION but ton to display the MENU screen and selec t SET UP . Press to select LO C K . Note: • Use a code that is easy to remember and record it in a safe place. This proj ect ion di splay has a b uilt- in V- Chip Control w hich al lows you to bloc k unwante d T V usag[...]

49 Advanced Op er a tion Setup US MO VIES Ratings 1 2 3 Perform “Enter Secret Code” step 1 on page 48. Press number ke ys to enter your secret code. Press to select US MOVIE S. Press to set Press to select CHANG E SET TINGS . Press to display the CHANGE SET TINGS screen. 4 Press to select VIEW NR PROG R A MS ? . Press to set “ YES” or “ N[...]

50 For assistanc e, please call : 1- 88 8 -VIEW P T V( 84 3 - 9788) Setup US T V PR OGR A MS Ratings 1 2 3 Perform “US MOVIES Ratings” step 1 on page 49. Press to select US T V PROG R A MS . Press to set. Press to select CHANG E SET TINGS . Press to display the CHANGE SET TINGS screen. 4 Press to select VIEW NR PROG R A MS ? . Press to set “ [...]

51 Advanced Op er a tion US TV PROGRAMS RA TINGS: Chart 1 Reset User ’ s Memory Functions <Whe n V - Ch ip Control is act ivated > T emporarily deactivate V -Chip control Enter y our sec ret code in the bloc king message screen. • V -Chip control is reactivated when power is turned off or power failure occurs. US TV PROGRAMS RA TINGS: Cha[...]

52 For assistanc e, please call : 1- 88 8 -VIEW P T V( 84 3 - 9788) CA PT I O N MO D E Activates the On - Screen Close d Caption feature. When activated this feature will remain on until OFF is selected in this menu. Closed Caption Modes from which to Choose Caption Mode: CAP C1 or C2 A narration of selec ted T V programs is displayed. Check T V pr[...]

53 Advanced Op er a tion 1 2 Press the ACTION but ton to display the MENU screen and selec t SET UP . Press to select CAP TION. Press to display the CAPTI ON screen. Press re peat ed ly to selec t CC ON MU TE. Press to select CC ON MU TE. Press to exit menu. 3 CC O N M UTE Activates the On - Screen Closed Caption feature, when the MUT E button on t[...]

54 For assistanc e, please call : 1- 88 8 -VIEW P T V( 84 3 - 9788) Stat ion na mes , e.g. ABC, TNN, etc. so t hat t hey will ap pea r when a c hann el is sel ect ed. Choos e 24 pre set names. 1 2 Press the ACTION but ton to display the MENU screen and selec t SET UP . Press to select CHAN NEL. Press to display the SET U P CHA N NEL screen. Press t[...]

55 Advanced Op er a tion 1 2 Press the ACTION but ton to display the MENU screen and selec t SET UP . ON : Picture is displayed regardless of signal condition, and may not always be clear ly visible. OFF : Screen tur ns solid blue when signal is absent or weak. (Screen tur ns solid black dur ing PIP or SPLIT funct ions. ) Press to select CHAN NEL. [...]

56 For assistanc e, please call : 1- 88 8 -VIEW P T V( 84 3 - 9788) 1 2 Press the ACTION but ton to display the MENU screen and selec t SET UP . ON : When signal is noisy OFF : When signal is high - qualit y Press to select VIDEO . Press to display the VID EO screen. Press to set “ON ” or “OFF” . Press to select VIDEO NR . Press to exit men[...]

57 Advanced Op er a tion 1 2 Press the ACTION but ton to display the MENU screen and selec t SET UP . ON : When screen size speci fi cat ion signals are detected, screen size is automatically change d. OFF : The screen size is not au to mat i cal ly c hanged. (T urn OFF if this func tion does not op er ate prop erl y .) If t he re ceived sig nal c[...]

58 For assistanc e, please call : 1- 88 8 -VIEW P T V( 84 3 - 9788) 1 2 Press the ACTION but ton to display the MENU screen and selec t SET UP . VGA : When RG B / DIGIT AL I N input signal is VGA 60 Hz from PC. 48 0P : When RGB / DIGIT A L IN input signal is 48 0 P from other equipment. AUT O : VGA / 48 0P input signals are distinguishe d automatic[...]

59 Advanced Op er a tion 1 2 Press the ACTION but ton to display the MENU screen and selec t SET UP . ON : Usually set to ON. OFF : Set to OFF if picture appear s unnatural. Accu rate se para tio n of the p ict ure’ s b right ne ss and c olor si gnal s allows you to e njoy a beau ti ful pic ture . Press to select VIDEO . Press to display the VIDE[...]

60 For assistanc e, please call : 1- 88 8 -VIEW P T V( 84 3 - 9788) 1 2 Press the ACTION but ton to display the MENU screen and selec t SET UP . Press to select OT H ER . Press to display the O THER screen. Press re peat ed ly to select the desired time. Press to select SLE EP TIM ER. Press to exit menu. 3 The proj ect ion di splay c an be se t to [...]

61 Advanced Op er a tion 1 Press the ACTION but ton to display the MENU screen and selec t SET UP . Press re peat ed ly to selec t the desired L A NGUA G E. Press to select L A NGUAGE. Press to exit menu. 2 The la ngua ge of t he proj ect ion di splay is se t to Engli sh as th e fac tor y sett ing. T o s elec t one of 3 d if fer ent lang uag es for[...]

62 For assistanc e, please call : 1- 88 8 -VIEW P T V( 84 3 - 9788) Demo Mode F eature 1 2 Press the ACTION but ton to display the MENU screen and selec t SET UP . Press to select OT H ER . Press to display the OTHER screen. Press to set “ON ” or “OFF” . Press to select DEMO MODE. Press to exit menu. 3 F un cti on dem onst rat ions of t his[...]

63 Advanced Op er a tion Still im age d ata (JPEG) mad e wit h a digi tal c am era, d igit al vid eo ca mera , or PC c an be p layed back u sing an SD Card / PC Card . Displayable Image Formats: Baseline JPEG (8 0 x 6 0 ~ 5 1 2 0 x 3 84 0 pixels ) Notes: • Some parts of an image may not be displayed or the image may be displayed on a smaller scal[...]

64 For assistanc e, please call : 1- 88 8 -VIEW P T V( 84 3 - 9788) Index Area Folders and fi les are displayed here . Notes: • Up to 1 000 JPEG fi les can be displayed. (This number may be lower if subfolders, or fi les other than JPEG are included in the folder .) • Depending on JPEG fi le type, “JPEG” will be displayed instead of thu[...]

65 Advanced Op er a tion SINGLE A single image sele cted fr om the index area fi lls t he screen. Y ou c an also rotate t he image and view imag e informat ion. ( PP . 6 6 - 67) SLIDE Images are displayed one af ter an other as a slide show. Also, the S PEED and T ransit ion features (p. 67) c an be used. JP E G Viewer (SD Card / PC Card) Note: Fi[...]

66 For assistanc e, please call : 1- 88 8 -VIEW P T V( 84 3 - 9788) JP E G Viewer (SD Card / PC Card) Single Play Mode 1 Pre ss ▲▼ to selec t “SIN GLE, ” and press A CTION . Pre ss ▲▼ ◄ ► to move cursor to desired fi le in IND E X AREA . ( Pre ss ▲▼ ◄ ► to display next / previous page of 9 thum bnail fi les ) , Pre ss ACTI[...]

67 Advanced Op er a tion FILE P2000006 DATE 07/31/2003 JP E G Viewer (SD Card / PC Card) Slide Show Mo de 1 Press ▲▼ to select “SLIDE,” and press ACT I O N . Press ▲▼ ◄ ► to move cursor to desired fi le in Index Area. ( Press ▲▼ ◄ ► to display next/previous page of 9 thumbnail fi les). Press ACTION to display SLIDE MENU. P[...]

68 For assistanc e, please call : 1- 88 8 -VIEW P T V( 84 3 - 9788) • Please wait more than one hour for lamp replacement. [ If you need to replace the lamp more urgently ] • The projection display has a forced cooling feature. After the POWER button is turned OFF , and sometime during about the fi rst minute of the normal cooling fan operatio[...]

69 Information R emote C ontro l Quick Re ference Guide (Operati ng p eripheral equ ipmen t) Pr ogramming The Illuminated Remote Control Using Access Codes The remote control c an be preset for other manufacturers, by utilizing the REMOTE MODE SELEC TION BUTTONS for CAB LE , DT V , VCR , RC VR (a Rece iver or Ampli fi er ), DVD (DVD or CD ) , DBS [...]

70 For assistanc e, please call : 1- 88 8 -VIEW P T V( 84 3 - 9788) Setting to t he remote using the step and set me t hod (When code is not known): 3 4 1 2 Press and hold the POWER and ACTION but tons simultaneously fo r at lea st 5 sec onds . Af ter 5 sec onds, all the illuminated mode but tons will begin to fl ash. Then let go of the POWER and [...]

71 Information Infrared C odes Index The remote control is c apable of operating many brands of peripheral equipment. Refer to page 69 and 70 for programming procedures. Notes: • The remote control memory is limited and therefore some models may not operate. The remote control is not designed to control all features available in all models. • A[...]

72 For assistanc e, please call : 1- 88 8 -VIEW P T V( 84 3 - 9788) CABL E CONVERTER B OX AND D VD , CD PLA YERS Infrared C od es Index DVD CBL Maker List (CBL ) Maker Set Up No. Maker Set Up No. ABC 124 PULSAR 105, 132 ARCHER 125, 132 PUSER 132 CABLEVIEW 105, 132 RCA 1 15 CITIZEN 105, 122 REALISTIC 132 CURTIS 1 12, 1 13 REGAL 1 12, 1 18, 140, 141,[...]

73 Information CA SSET TE P L A YERS , PERS ONAL V IDEO RE CORDERS , RECEIVERS, AMPL IFIERS, and DBS Infrared Codes Index DBS RCVR AUX Remo te Control Quick Reference Guide (Op erating p eripheral equipment) Maker List (T APE) Maker Set Up No. Maker Set Up No. AIW A 223, 224, 225 PHILIPS 222 DENON 231 PIONEER 204 FISHER 203 RCA 226, 227, 228 JENSEN[...]

74 For assistanc e, please call : 1- 88 8 -VIEW P T V( 84 3 - 9788) Quick Reference F unct ional Button Char t BUTTON MODE FUNCTION All Components T urns selected components On and Off TV Press to access Second Audio program MUTE TV CBL RCVR Mutes audio ASPECT TV DTV DBS Select picture size (ratio) to match programming format. TV/ VIDEO TV RCVR Sel[...]

75 Information Notes: • Not all functions listed may be controllable. • Some TV , Cable Box and DSS Receiver brands require you to turn on the power manually . Quick Reference F unct ional Button Char t BUTTON MODE FUNCTION PROG DTV DBS Delimiter between major and minor channel number TV VCR AUX (Cassette Deck) DVD CD RCVR PIP Move Rewind Skip [...]

76 For assistanc e, please call : 1- 88 8 -VIEW P T V( 84 3 - 9788) Before y ou call for ser vice, determine the symptoms and mak e a few simple checks as sho w n below . Symptoms Checks Page Power does not turn ON • Is the power plug plugged in? 22-23 Lamp does not light up. • If the Lamp will not light after turning on the power 2 or 3 times,[...]

77 Information Note: Design and Speci fi cations are subject to change without notice. Weight and Dimensions shown are approximate. PT -5 0L C 1 3 Power Source AC 1 20 V , 6 0 Hz Power Consumption Power ON : A pprox. 220 W ( When audio is at maximum) Power OFF : Approx. 0.4 W ( When co oling fan is stopped) LCD panels 0.9 ″ Poly silic on TF T L [...]

78 For assistanc e, please call : 1- 88 8 -VIEW P T V( 84 3 - 9788) T o ensure continued excellent per formanc e by this product, p eriodic cleaning is recommended. The unit c ontains many plastic par ts. For this reason DO N O T use benzine, thinner or other chemic als to clean the unit. Dust will ac cumulate on the picture screen. Please wipe w i[...]

79 Information P AN ASONI C CONSU MER ELECTRONIC S COM P A NY , DIVI SION OF MA TSUSHI T A ELE CTRIC COR POR A TION OF A MERI CA One Panasonic Way Secaucus, N ew Jersey 07 0 9 4 P AN ASONI C SALES COM P A NY , DIVISI ON OF M A TSUSHIT A ELECTRIC OF PU ERT O RICO, INC., Av e. 65 de Infantería, Km. 9.5 San Gabriel Indust rial Park, Carolina, Puer to[...]

Customer ’ Record The serial number of t his product c an be found on its back c ov er . Y ou should note this ser ial number in the space provided below and retain this book, plus your purchase re ceipt, as a permanent rec ord of your purchase to aid in identi fi c ation in the even t of t heft or loss, and for Warrant y Ser vice pur poses. Pan[...]