Panasonic PT-EW530EL инструкция обслуживания

Operating Instructions Functional Manual LCD Projector Commercial Use Model No. PT -EZ570E PT -EZ570EL PT -EW630E PT -EW630EL PT -EW530E PT -EW530EL PT -EX600E PT -EX600EL PT -EX500E PT -EX500EL ENGLISH L V4A Thank you for purchasing this Panasonic Product. Before operating this product, please read the instructions carefully , and save this manual[...]

2 - ENGLISH Important Information Read this rst! W ARNING: THIS APP ARA TUS MUST BE EARTHED. W ARNING: T o prevent damage which may result in re or shock hazard, do not expose this appliance to rain or moisture. Machine Noise Information Ordinance 3. GSGV , January 18, 1991: The sound pressure level at the operator position is equal or less t[...]

Read this rst! ENGLISH - 3 Important Information IMPORT ANT : THE MOULDED PLUG (U.K. only) FOR YOUR SAFETY , PLEASE READ THE FOLLOWING TEXT CAREFULL Y . This appliance is supplied with a moulded three pin mains p lug for your safety and convenienc e. A 13 amp fuse is tted in this plug. Should the fuse need to be replaced, please ensure that t[...]

Read this rst! 4 - ENGLISH Important Information W ARNING: PO WER  The wall outlet or the circuit breaker shall be installed near the equipment and shall be easily accessible when problems occur . If the following problems occur , cut off the power supply immediately . Continued use of the projector in these conditions will result in re or[...]

Read this rst! ENGLISH - 5 Important Information W ARNING: Installation work (such as ceiling mount bracket) should only be carried out by a qualied technician. If installation is not carried out and secured correctly it can cause injury or accidents, such as electric shocks. Do not use anything other than an authorized ceiling mount bracket.[...]

Read this rst! 6 - ENGLISH Important Information W ARNING: ACCESSORI ES  Do not use or handle the batteries improperly , and refer to the following. Failure to observe this will cause burns, batteries to leak, overheat, explode or catch re. Use AAA/R03 or AAA/LR03 batteries. z Do not use unspecied batteries. z Do not disassemble dry cel[...]

Read this rst! ENGLISH - 7 Important Information T o remove the battery Remote Control Battery 1 . P r es s the g ui de an d l ift th e cover . 2. Re move th e batteri es. CAUTION: PO WER  When disconnecting the power cord, be sure to hold the power plug and power connector . If the power cord itself is pulled, the lead will become damaged, a[...]

Read this rst! 8 - ENGLISH Important Information T rademarks HDMI, the HDMI logo and High-Denition Multimedia Interface is a trademark or registered trademark of HDMI • Licensing LLC. PJLink™ is a trademark or pending trademark in Japan, the United States, and other countries and region. • RoomView and Crestron RoomV iew are registered [...]

ENGLISH - 9 With the Direct Power Of f function, you can disconnect the power cord from the wall outlet or turn of f the breaker even during projection. The inclusion of an HDMI terminal provides support for high quality video and HDMI audio. The digital zoom function allows you to focus on the crucial information during a presentation. The project[...]

10 - ENGLISH Important Information Preparation Getting Started Basic Operation Settings Maintenance Appendix Contents Be sure to read “Read this rst!”. ( pages 2 to 8) Important Information Read this rst! ........................................... 2 Contents ................................................... 1 0 Precautions for Use.....[...]

ENGLISH - 11 Important Information Preparation Getting Started Basic Operation Settings Maintenance Appendix Contents Image 1-10 ................................................................... 54 Image adjust............................................. 55 Contrast ........................................................................ 55 Brig[...]

12 - ENGLISH Important Information Precautions for Use Cautions when transporting When transporting the projector , hold it securely by its bottom and avoid z excessive vibration and impacts. Doing so may damage the internal parts and result in malfunctions. Y ou can also use the handle grip in the back of the projector when transporting. Do not tr[...]

Precautions for Use ENGLISH - 13 Important Information Cautio ns when s etting the pro jector s J When installing and using the projector with a method other than the oor standing installation using the z adjustable feet, x the projector using the ve screw holes for ceiling mounting (shown in the gure). (Screw diameter:M6, tapping depth[...]

Precautions for Use 14 - ENGLISH Important Information Security T a ke saf e t y mea sures against f ollow ing incident s. J Personal information being leaked via this product. z Unauthorized operation of this product by a malicious third party . z Interfering or stopping of this product by a malicious third party . z Security instruction ( J Æ pa[...]

Precautions for Use ENGLISH - 15 Important Information La mp J The luminous source of the projector is a mercury lamp with high internal pressure. A high pressure mercury lamp has following characteristics. The brightness of the lamp will decrease by duration of usage. z The lamp may burst with sound or shorten life by shock or chipping. z The life[...]

Precautions for Use 16 - ENGLISH Important Information Accessories Make sure the following accessories are provided with your projector . Numbers in the brackets ( ) show the number of accessories. Wireless/Wired remote control unit (x1) ヱヰヸユン ヰワ ヴヵモワュャヺ ヮヶヵユ ヰワ ヰョョ ヷヰロ ヷヰロ モヷチヮヶ?[...]

Precautions for Use ENGLISH - 17 Important Information Attention After unpacking the projector , discard the power cord cap and packaging material properly . z For lost accessories, consult your dealer . z The part numbers of accessories and separately sold components are subject to change without notice. z Store small parts in an appropriate manne[...]

18 - ENGLISH Preparation About Y our Projector Remote control (6) (4) (1) Remote control signal emitter (2) <POWER ON> button T urn the projector on. ( Æ page 37) (3) <SHUTTER>/<A V MUTE> button * <SHUTTER> button (Only for EZ570 series, EW630 series and EX600 series.) Close and open up the built-in shutter . * <A V MUTE[...]

About Y our Projector ENGLISH - 19 Preparation (15) (23) (20) * (22) (19) (14) (18) (16) (26) (17) (25) (24) (21) (14) <ECO> button Display the Eco management function. ( Æ page 43) (15) <P-TIMER> button Operate the P-timer function. ( Æ page 43) (16) <FREEZE > button Pauses the projected image and sound tentatively . ( Æ page [...]

About Y our Projector 20 - ENGLISH Preparation (1) Lens Release Button (2) Indicators ( Æ page 21) (3) Am b ient Luminance sensor ( Æ page 56) (4) Lamp cover ( Æ page 97) The lamp unit is located inside. (5) Speaker (6) Projection Lens (for PT -EZ570E, PT -EW630E, PT -EW530E, PT -EX600E and PT -EX500E) (7) Remote control signal receiver (Front &[...]

About Y our Projector ENGLISH - 21 Preparation Side control and Indicators (1) (2) (4) (5) (7) (6) (8) (9) (1) < > button T urn the projector on or off. (2) <MENU> button Displays the menu screen. ( Æ page 46) (3) <SHUTTER>/<A V MUTE> button * <SHUTTER> button (Only for EZ570 series, EW630 series and EX600 series.) Cl[...]

About Y our Projector 22 - ENGLISH Preparation Rear terminals (1) Remote control signal receiver (Back) The infrared remote receiver is also located in the front and top . (2) LAN Connect the LAN cable. (3) MONITOR OUT This terminal can be used to output the incoming analog RGB signal from INPUT 1-2 terminals to the other monitor . (4) RGB Connect [...]

ENGLISH - 23 Preparation Using Remote control Installing and Removing batteries Open the cover 1 ) Install batteries and close the cover 2 ) (Insert the – side rst.) Remove the batteries in the reverse order of z installation. Setting Remote control ID numbers When you use the system with multiple projectors, you can operate all the projectors[...]

24 - ENGLISH Getting Started Setting up Projection method Y ou can use the projector with any of the following 4 projection methods. T o set the desired method in the projector . J Setting on a desk/oor and projecting forward Mounting on the ceiling and J projecting forward Menu setting* 1 Menu setting* 1 Ceiling Off Rear Off Ceiling On Rear Off[...]

Setting up ENGLISH - 25 Getting Started Removing and attaching the projection lens When replacing the lens or using an optional lens, install the lens by following the instructions below . Ask the sales dealer for detailed information of the optional lens specications. Removing the lens J 1. Press and hold the <LENS> button or <LENS SHI[...]

Setting up 26 - ENGLISH Getting Started Screen size and throw distance Place the projector referring to the diagram on the right and the gures of throwing distance. Y ou can adjust the display size L (L W/L T) Screen L (L W/L T) SW Screen SH SW SD Projected image SH L (L W/L T) * 1 Projection distance (m) SH Height of the projection area (m) SW [...]

Setting up ENGLISH - 27 Getting Started For the screen aspect ratio of 16:9 (Unit: m) z Lens type The standard zoom lens The lens of optional accessories Height position (H) * 2 Fixed-focus Lens Short Zoom Lens Long Zoom Lens Ultra Long Zoom Lens Model number of projection lens - - - ET -EL W21 ET -ELW20 ET -EL T20 ET -EL T21 Throw ratio * 1 1.7 ~ [...]

Setting up 28 - ENGLISH Getting Started J Projection distance by projection lens (for EW630 series and EW530 series) For the screen aspect ratio of 16:10 (Unit: m) z Lens type The standard zoom lens The lens of optional accessories Height position (H) * 2 Fixed-focus Lens Short Zoom Lens Long Zoom Lens Ultra Long Zoom Lens Model number of projectio[...]

Setting up ENGLISH - 29 Getting Started For the screen aspect ratio of 4:3 (Unit: m) z Lens type The standard zoom lens The lens of optional accessories Height position (H) * 2 Fixed- focus Lens Short Zoom Lens Long Zoom Lens Ultra Long Zoom Lens Model number of projection lens - - - ET -EL W21 ET -ELW20 ET -EL T20 ET -EL T21 Throw ratio * 1 2.0 ~ [...]

Setting up 30 - ENGLISH Getting Started For the screen aspect ratio of 4:3 (Unit: m) z Lens type The standard zoom lens The lens of optional accessories Height position (H) * 2 Fixed- focus Lens Short Zoom Lens Long Zoom Lens Ultra Long Zoom Lens Model number of projection lens - - - ET -EL W21 ET -EL W20 ET -EL T20 ET -EL T21 Throw ratio * 1 1.7 ~[...]

Setting up ENGLISH - 31 Getting Started If the projector is used with a screen size not listed in this manual, check the diagonal dimension (m) of your screen and calculation the projection distance using the following formula. Calculation formulas for projection distance by lens types J (for EZ570 series) Lens type Aspect ratio Projection distance[...]

Setting up 32 - ENGLISH Getting Started Calculation formulas for projection distance by lens types J (for EW630 series, EW530 series) Lens type Aspect ratio Projection distance (L) formula The standard zoom lens 16:10 Min. (L W) L= 0.141732 x SD(m) - 0.050400 Max. (L T) L= 0.241339 x SD(m) - 0.049700 16:9 Min. (L W) L= 0.145672 x SD(m) - 0.050400 M[...]

Setting up ENGLISH - 33 Getting Started Adjusting front adjustable feet The adjustable feet can be extended by turning it as shown in the gure. It is retracted by turning it in the opposite direction. (Projection angle can be adjusted vertically .) Attention Heated air comes out of the air exhaust port while the lamp is lit. Do not touch the air[...]

34 - ENGLISH Getting Started Connections Before connecting to the projector Read carefully the instruction manual for the device to be connected. z T urn off the power switch of the devices before connecting cables. z If any connection cable is not supplied with the device, or if no optional cable is available for connection of the z device, prepar[...]

ENGLISH - 35 Basic Operation Powering ON/OFF Connecting the power cord Be sure to insert the attached power cord securely to its base to prevent it from coming off. Power cord holder J A power cord holder is designed to prevent the AC power cord from coming off the projector . Please insert the power cord into the power cord holder correctly as Pic[...]

Powering ON/OFF 36 - ENGLISH Basic Operation ON(G)/ST ANDBY(R) indicator The <ON(G)/ST ANDBY(R)> indicator informs you the status of the power . Conrm the status of the <ON(G)/ ST ANDBY(R)> indicator before operating the projector . ヵユヮヱ ヰワ ⾷ヨ⾸ バ チヴヵモワュャヺ ⾷ン⾸ ョリロヵユン ヴラヶヵ?[...]

Powering ON/OFF ENGLISH - 37 Basic Operation Complete peripheral connections (with a 1 ) computer , VCR, etc.) before turning on the projector . Connect the projector ’s AC power cord into an 2 ) AC outlet. The <ON(G)/ST ANDBY(R)> indicator lights red. Press the < 3 ) > button on the side control o r the <POWER ON> button on the[...]

Powering ON/OFF 38 - ENGLISH Basic Operation Enter a PIN code PIN Code Input Dialog Box When using the side control J Press ▲▼ to enter a number . Press ► to x the number and move the red frame pointer to the next box. The number changes to  . If you xed an incorrect number , use the ◄ button to move the pointer to the number you w[...]

Powering ON/OFF ENGLISH - 39 Basic Operation Press the < 1 ) > button on the side control o r the <ST ANDBY> button on the remote control, and Power off? appears on the screen. Press the < 2 ) > button on the side control o r the <ST ANDBY> button on the remote control again to turn off the projector . The <ON(G)/ ST ANDB[...]

40 - ENGLISH Basic Operation Projecting Check the connections of the peripheral devices and connection of the power cord ( Æ page 35) and switch on the power ( Æ page 37) to start the projector . Select the image and adjust the state of the image. Selecting the image Select an input signal. Side Control/Remote Control Operation J Y ou can press t[...]

ENGLISH - 41 Basic Operation Basic operations by using the remote control Using the SHUTTER/ A V MUTE button * <SHUTTER> button Only for EZ570 series, EW630 series and EX600 series This function allows you allows you to completely block out light to the screen. button Press the <SHUTTER * > button on the remote control. Note For details[...]

Basic operations by using the remote control 42 - ENGLISH Basic Operation Using the MENU button This function allows you to open or close the On- Screen Menu. button Press the <MENU> button on the remote control. Note For details, please refer to “Menu Navigation”. z ( Æ page 46) Using the AUTO PC ADJ button This function allows you to a[...]

Basic operations by using the remote control ENGLISH - 43 Basic Operation Using the P-TIMER button Press the <P-TIMER> button on the remote control to operate the Count up/Count down function. button Press <P-TIMER> button on the remote control. Note Press the <P-TIMER> button to start the count time. z Press the <P-TIMER> b[...]

Basic operations by using the remote control 44 - ENGLISH Basic Operation Using the KEYST ONE button This function allows you to correct keystone distortion. button For EW530 series and EX500 J series. Press the <KEYSTONE> button on the remote control. The Keystone dialog box appears. Press ▲▼ to correct keystone distortion. The keystone [...]

Basic operations by using the remote control ENGLISH - 45 Basic Operation Using the ZOOM +/- buttons Adjusts the zoom of the lens. buttons Press <ZOOM +/-> buttons on the remote control. Note For details, please refer to “Adjusting the image” z ( Æ page 40). Using the FOCUS +/- buttons This function allows you to to adjust focus of the i[...]

46 - ENGLISH Settings Menu Navigation Navigating through the menu Operating procedure J For example: PT -EZ570E Press the <MENU> button. 1 ) The Main Menu screen appears. Press ▲▼ to select the Main Menu 2 ) item. Select the desired item from the 9 items: [Input], [PC adjust], [Image select], [Image adjust], [Screen], [Sound], [Setting], [...]

Menu Navigation ENGLISH - 47 Settings Main menu The main menu consists of the following 9 menu items. When a main menu item is selected, the screen changes to a submenu selection screen. Input PC adjust Image select Image adjust Screen Sound Setting Information Network Sub menu The sub-menu screen of the selected main menu appears, and you can set [...]

Menu Navigation 48 - ENGLISH Settings Screen [ J ] Sub-menu item Factory default Page Normal - 58 Full - 58 Wide (16:9) - 58 Zoom - 58 T rue* 1 - 58 Natural wide* 2 - 58 Custom - 58 Custom adj. - 59 Digital zoom + * 1 - 59 Digital zoom - * 1 - 59 Keystone Store 59 Ceiling Off 60 Rear Off 60 Screen aspect* 2 Default(16:10) 60 Reset - 60 When input c[...]

ENGLISH - 49 Settings Input menu Select [Input] from the Main Menu (see “Navigating through the menu” on page 46), then select the item from the sub-menu. Input 1 Press ▲▼ to select [Input 1]. 1 ) Press ► to access the submenu. 2 ) Press ▲▼ to select [RGB(PC analog)], 3 ) [RGB(Scart)], [DVI-D], [DVI-D(HDCP)] or [HDMI]. Press the <E[...]

Input menu 50 - ENGLISH Settings Y , Pb/Cb, Pr/Cr Auto The projector automatically detects an incoming video signal, and adjusts itself to optimize its performance. Y , Pb/Cb, Pr/Cr SIGNAL FORMA T If the projector cannot reproduce proper video image, select a specific component video signal format among [480i], [576i], [480p], [576p], [720p], [1 03[...]

ENGLISH - 51 Settings AUT O PC adjust Select [PC adjust] from the Main Menu (see “Navigating through the menu” on page 46), then select the item from the sub-menu. Remote Control Side Control Auto PC adj. Auto PC adjustment function is provided to automatically adjust [Fine sync], [T otal dots], [Position H] and [Position V] to conform to your [...]

52 - ENGLISH Settings Manual PC adjust Select [PC adjust] from the Main Menu (see “Navigating through the menu” on page 46), then select the item from the sub-menu. Remote Control Side Control Some computers employ special signal formats which may not be tuned by Multi-scan system of this projector . Manual PC adjustment enables you to precisel[...]

Manual PC adjust ENGLISH - 53 Settings Current mode Press ▲▼ to select [Current mode]. 1 ) Press ► or the <ENTER> button to 2 ) enter the next submenu to show [ H-sync freq.] and [V -sync freq.] of the connected computer . Clamp Press ▲▼ to select [Clamp]. 1 ) Press the <ENTER> button to display 2 ) the adjustment dialog box .[...]

54 - ENGLISH Settings Image select Select [Image select] from the Main Menu (see “Navigating through the menu” on page 46), then select the item from the sub-menu. Remote Control Side Control Note When you changed the image mode in the [Image select] z menu, each item you have changed will return the factory default. Dynamic For viewing picture[...]

ENGLISH - 55 Settings Select [Image adjust] from the Main Menu (see “Navigating through the menu” on page 46), then select the item from the sub-menu. Remote Control Side Control Note Make sure you selected [Store] after adjusting settings. z Some settings can not be stored if not registered with [Store] function. After you changing the image m[...]

Image adjust 56 - ENGLISH Settings Color temp. Press ▲▼ to select [Color temp.]. 1 ) Press the <ENTER> button to display 2 ) the adjustment dialog box. Press ◄► to select the desired Color 3 ) temp. level. Y ou can select the desired [Color temp.] from z [XLow], [Low], [Mid] or [High]. Red Press ▲▼ to select [Red]. 1 ) Press the &[...]

Image adjust ENGLISH - 57 Settings Sharpness Press ▲▼ to select [Sharpness]. 1 ) Press the <ENTER> button to display 2 ) the adjustment dialog box . Press ◄► to adjust the setting value. 3 ) Operation Adjustment Adjustment range Press ►. increase the sharpness of the image Maximum value 31 Press ◄. decrease the sharpness of the im[...]

58 - ENGLISH Settings Screen Select [Screen] from the Main Menu (see “Navigating through the menu” on page 46), then select the item from the sub-menu. Remote Control Side Control Normal Provide the image to t the screen size while maintaining the aspect ratio of the input signal. Press ▲▼ to select [Normal] and then press the <ENTER&[...]

Screen ENGLISH - 59 Settings Custom adj. Adjust the screen scale and position manually with this function. Press ▲▼ to select [Custom adj.]. 1 ) Press ► or the <ENTER> button to 2 ) enter the next submenu. Press ▲▼ to choose the item you 3 ) want to adjust. Y ou can choose one from the items as below: z Scale H/V Adjust the Horizont[...]

Screen 60 - ENGLISH Settings Ceiling This function is used to project the image from a ceiling-mounted projector . Press ▲▼ to select [Ceiling] and then 1 ) press the <ENTER> button. Press ▲▼ to change the image. 2 ) When this function is set to [On], the picture will z be top/bottom and left/right reversed. Rear This function is used[...]

ENGLISH - 61 Settings Sound Select [Sound] from the Main Menu (see “Navigating through the menu” on page 46), then select the item from the sub-menu. Remote Control Side Control V olume Press ▲▼ to select [V olume] and then 1 ) press the <ENTER> button. Press ◄► to adjust the volume. 2 ) Press <ENTER> button to set the volum[...]

62 - ENGLISH Settings Setting Select [Setting] from the Main Menu (see “Navigating through the menu” on page 46), then select the item from the sub-menu. Remote Control Side Control Language Press ▲▼ to select [Language]. 1 ) Press ► or the <ENTER> button. 2 ) Press ▲▼ to select the desired 3 ) language. For example: PT -EZ570E [...]

Setting ENGLISH - 63 Settings Display This function decides whether to display On-Screen Displays. Press ▲▼ to select [Display]. 1 ) Press the <ENTER> button. 2 ) Press ▲▼ to switch 3 ) between each option as below . On Show all the On-Screen displays * 1 Countdown off Show the input image instead of the countdown when turning on the [...]

Setting 64 - ENGLISH Settings Attention Be sure to note the new Logo PIN code and keep it on z hand. If you lost the number , you could no longer change the Logo PIN code setting. Picture in Picture This function is used to project two images simultaneously by placing a separate small sub screen within or next to the main screen. Press ▲▼ to se[...]

Setting ENGLISH - 65 Settings HDMI setup This function is only used for HDMI input source. Press ▲▼ to select [HDMI setup]. 1 ) Press ► or the <ENTER> button. 2 ) The names for the output setting of Digital R/G/ z B vary from equipment to equipment. HDMI signal level J 64-940 When the output of Digital R/G/B equipment is set to Standard[...]

Setting 66 - ENGLISH Settings Simple mode This function decides whether to activate the simple mode. Press ▲▼ to select [Simple mode] and 1 ) then press the <ENTER> button. Press ▲▼ to switch between [On] and 2 ) [Off]. On Only the simple mode buttons are active. Off Simple mode function is off. Note W arning icon and z [Simple mode :[...]

Setting ENGLISH - 67 Settings Power management For reducing power consumption as well as maintaining the lamp life, the Power management function turns off the projection lamp when the projector is not operated for a certain period. Press ▲▼ to select [Power 1 ) management]. Press ► or the <ENTER> button to 2 ) access the submenu. Mode [...]

Setting 68 - ENGLISH Settings Execute J Press ▲▼ to select one among the 1 ) items as below and then press the <ENTER> button. Start It executes the count up or count down function.* 1 Reset Reset the P-timer values.* 2 Exit T o exit the P-timer operation. Press the <ENTER> button at Start and the *1 : indication ch anges into Stop.[...]

Setting ENGLISH - 69 Settings Press ▲▼ to select the desired items 1 ) as below . Permit the shutter operation from both the remote control and the projector's side control. Prohibit the shutter operation from the remote control. Prohibit the shutter operation from the side control. Prohibit the shutter operation from both the remote contr[...]

Setting 70 - ENGLISH Settings Filter counter This function is used to set the frequency of cleaning or replacing the lter unit. Press ▲▼ to select [Filter counter]. 1 ) Press ► or the <ENTER> button to 2 ) access the submenu items. Filter counter J Show the total accumulated time of the lter use timer setting. Filter counter remai[...]

ENGLISH - 71 Settings Information Select [Information] from the Main Menu (see “Navigating through the menu” on page 46), then select the item from the sub-menu. Remote Control Side Control Input Source Information Display The Information Menu is used for checking the status of the image signal being projected and the operation of the projector[...]

72 - ENGLISH Settings Network Select [Network] from the Main Menu (see “Navigating through the menu” on page 46), then select the item from the sub-menu. Remote Control Side Control Projector name Y ou can change the projector name to be displayed on the network. Press ▲▼ to select [Projector name]. 1 ) Press the <ENTER> button. 2 ) P[...]

Network ENGLISH - 73 Settings This projector supports the following application software from Crestron company . RoomView z ® Express Fusion RV z ™ RoomView z ® Server Edition "Crestron RoomView" is a system developed by Crestron Electronics, Inc. which collectively manage and control multiple system devices connected via the network,[...]

Network 74 - ENGLISH Settings Network connections The projector has a network fuction, and the following operations are available from the computer using the web browser control. Setting and adjustment of the projector . z Display of the projector status. z T ransmission of an E-mail message when there is a problem with the projector . z Note A LAN[...]

Network ENGLISH - 75 Settings Accessing from the W eb browser Activate the Web bro wser in the per sona l comput er . 1 ) Enter the IP ad dress set b y the projector into th e URL input eld of the Web bro wser . 2 ) Enter y our “ User name” and “ Password” . 3 ) z The facto r y default settings are user1 (user privile ges ) or admin 1 (a[...]

Network 76 - ENGLISH Settings Description of each item J 1 Page select ion tabs Click the se to switch pages. 2 M onitor infor mation but ton Click thi s item, and the status of the proje ctor is display ed. 3 Proj ector c ontrol butto n Click thi s item to displa y the proj ector c ontrol page. 4 D etailed set up but ton Click thi s item to displa[...]

Network ENGLISH - 77 Settings Error information page J If [Erro r (Detail) ] is displayed in the self- diagnosi s informatio n display column on the [ Projector status] screen, clic k the par t to display the details of the er ror . Depending o n the nature of the er ror , t he projector m a y be plac ed in the standby mode fo r its own protecti on[...]

Network 78 - ENGLISH Settings Basic control page J T o move from another page, c lick [Projec tor contro l], then [Basi c control ]. 1 Power standby /on control 2 Us e these to selec t the input signals 3 Switch es image mode 4 T urn on o r off t he SHUT TER*/ A V M UTE* func tion * Whe n it displays SH UT TER , it is only fo r EZ570 se ries , EW6 [...]

Network ENGLISH - 79 Settings 5 Operat ions on Ke ystone* function 6 Operat ions on Lens shif t 7 Oper ations on Zoom 8 Oper ations on Focus 9 Oper ations on T est pat tern 1 0 Return to factor y default set ting * For EW53 0 serie s and EX5 00 ser ies, the < LEFT > an d <RIGHT > but tons will display in gray and are not available. 5 6 [...]

Network 80 - ENGLISH Settings Network cong page J Y ou c an change net work set tings on proj ector when c onnec ting with the administ rator authorit y . LAN settings z Click [ Detailed set up ] in the menu. 1 ) Click [ Change ] to change t he L AN settings. 2 ) z T o ret urn to th e previous w indow, click [ Back]. Complete the d etailed setti[...]

Network ENGLISH - 81 Settings Ping test page J This page makes it pos sible to check w hether the net work is c onnected to th e e- mail ser ver , POP se r ver , DNS ser ver , etc. Click [D etailed set up], then [Ping test] to displa y the Ping test page. Disp lay whic h app ears w hen t he conn ect ion was suc ces sful. D ispl ay which ap pea rs w[...]

Network 82 - ENGLISH Settings E-mail set up page J With thi s projector , i f a problem oc curs or i f the lamp usage tim e reaches a set value, an e- mail mess age can be sent to one or more p reset e- mail addres ses ( ma ximum t wo addresses ). Click [D etailed set up], then [E-mail set up] to display the E-mail setup page. 1 S elect Enable to u[...]

Network ENGLISH - 83 Settings E-mail set up page (continued) J 9 Enter the E- mail Address2 of your desired re cipient. 10 Select t he conditi ons for sending e - mail. MA IL CONTENT S : Sele ct [NO RMA L] or [SIMPLE]. ERROR : An er ror is detected by self- diagnosi s. L AMP RU NTIME: Remaining lamp ser vic e time has reach ed the value set in the [...]

Network 84 - ENGLISH Settings Contents of mail sent J Mail with the contents shown below is sent when the e-mail settings have z been established. === Panasonic projector report(CONFIGURE) === Projector Type : PT-EZ570 Serial No : 000000000 ----- E-mail setup data ----- TEMPERATURE WARNING SETUP MINIMUM TIME at [ 60] minutes interval INTAKE AIR TEM[...]

Network ENGLISH - 85 Settings Mail with the contents shown below is sent when an error has occurred. z === Panasonic projector report(ERROR) === Projector Type : PT-EZ570 Serial No : 000000000 ----- check system ----- MAIN CPU BUS [ OK ] FAN [ OK ] INTAKE AIR TEMPERATURE [ OK ] AROUND LAMP TEMPERATURE [ OK ] OPTICS MODULE TEMPERATURE [ OK ] LAMP RE[...]

Network 86 - ENGLISH Settings Change Password page J Click [Change pas sword]. 1 Administ rator 2 User Administrator mode 1 Account 2 Cur rent u ser na me inpu t eld 3 Cur rent p assword i nput  eld 4 N ew user n ame inp ut e ld 5 N ew pas sword inpu t eld 6 N ew pas sword inpu t eld (re - ent er for conrmation) 7 Bu tt on for exe[...]

Network ENGLISH - 87 Settings CRSTRON RoomV iew page J Y ou c an monitor or c ontrol the pr ojector using RoomView . T o display the operat ion page of Room View f rom Web Control scre en, acces s with the administ rator rights is required. ( The [CRESTRON Room View] button i s not display ed on the Web Contr ol screen fo r user rights. ) When you [...]

Network 88 - ENGLISH Settings Info page Click Info on t he operation pa ge. 1 Proj ect or nam e Displays the name of the p rojector . 2 M ac Addr ess Displays the M A C address. 3 Resolution Displays the reso lution of the proje ctor . 4 L amp H ours Displays the lamp usag e time ( c onv er ted value ). 5 Power St atu s Displays the status of the p[...]

ENGLISH - 89 Maintenance About indicator status If an indicator turns on If a problem occurs within the projector , it will be notied with the temperature indicator <TEMP>, the lter indicator <FIL TER>, the shutter indicator <SHUTTER* /A V MUTE *>, and the lamp indicator <LAMP>. Check the status of the indicators and t[...]

About indicator status 90 - ENGLISH Maintenance When there is a problem with internal temperature J The status of the indicator is displayed with the following symbols.  : Off,  : On,  : Flashing,  : Off or On or Flashing Indicators Status of the projector <ON(G)/ ST ANDBY(R)> Green/Red/ Orange <TEMP> Red <FIL TER> Ora[...]

About indicator status ENGLISH - 91 Maintenance When there is a problem with internal power J The status of the indicator is displayed with the following symbols.  : Off,  : On,  : Flashing,  : Off or On or Flashing Indicators Status of the projector <ON(G)/ ST ANDBY(R)> Green/Red/ Orange <TEMP> Red <FIL TER> Orange &l[...]

About indicator status 92 - ENGLISH Maintenance When there is a problem with the lamp J The status of the indicator is displayed with the following symbols.  : Off,  : On,  : Flashing,  : Off or On or Flashing Indicators Status of the projector <ON(G)/ ST ANDBY(R)> Green/Red/ Orange <TEMP> Red <FIL TER> Orange <SHUT[...]

ENGLISH - 93 Maintenance Maintenance/replacement Filter cover [OPEN ▲▼ LOCK] Air filter unit Ta b Before cleaning/replacing the unit When you perform maintenance or replacement of the parts, make sure to turn off the power and disconnect z the power plug from the wall outlet. ( Æ pages 35, 39) Be sure to observe the procedure “T urning off t[...]

Maintenance/replacement 94 - ENGLISH Maintenance Clean the air lter unit 5 ) Removing the dust from the air lter unit z (i) Remove the dust from the air lter unit using a vacuum or other cleaner . If the dust persists after cleaning with a vacuum, wash the air lter unit in water . z W ashing the air lter unit z (i) Soak the air lt[...]

Maintenance/replacement ENGLISH - 95 Maintenance Replacing the unit Replacement of the air lter unit J T urn off the projector , and unplug the 1 ) AC power cord from the AC outlet. Clean up the dust on the projector and 2 ) around the air vents. Press ▼ downwards on the lter cover 3 ) to release the latch and open the lter cover . Pull [...]

Maintenance/replacement 96 - ENGLISH Maintenance J Lamp unit The lamp unit is a consumable component. Y ou can check the total usage time using Lamp runtime in the Information menu on page 71. It is recommended to ask an authorized engineer to replace the lamp unit. Contact your dealer . Consult your dealer to purchase a replacement lamp unit (ET -[...]

Maintenance/replacement ENGLISH - 97 Maintenance J Replacing the Lamp unit CAUTION: When the projector is mounted on a ceiling, do not work with your face close to the projector . z Attach the lamp unit and the lamp cover securely . z When you experience difculty in installing the lamp, remove it and try again. If you use force to install the z [...]

98 - ENGLISH Maintenance T roubleshooting Please check following points. For details, see the corresponding pages. Problem Cause Reference page Power does not turn on. The power cord may not be connected. z — No electric supply is at the wall outlet. z — The circuit breakers have tripped. z — I z s the <LAMP> indicator , <ON(G)/ST AN[...]

T roubleshooting ENGLISH - 99 Maintenance Problem Cause Reference page The picture does not display correctly . There may be a problem with the VCR or other signal source. z A signal which is not compatible with the projector is being input. z — 109-1 13 Picture from a computer does not appear . The cable may be longer than the optional cable. z [...]

100 - ENGLISH Appendix T echnical Information PJLink protocol The net work func tion of the p rojector suppo r ts P J Link class 1 , and the P J Link protocol c an be used to per fo rm projec tor setting and p rojector st atus quer y operations f rom a com puter . Control commands J The followi ng table lists t he P JLink p rotocol c ommands that c[...]

T echnical Information Appendix ENGLISH - 101 Control commands via LAN When WEB Control administrator rights password is set (Protect mode) J Connection method z Obtain the IP address and port number (Initial set value = 1 024) of the projector and 1 ) make a request for connection to the projector . Acquire th e IP address fr om the menu scre en o[...]

T echnical Information 102 - ENGLISH Appendix When WEB Control a dministrator rights passw ord is not set (Non-prot ect J mode) Connection method z Obtain the IP address and port number (Initial set value = 1 024) of the projector and 1 ) make a request for connection to the projector . Acquire th e IP address fr om the menu scre en of the projec t[...]

T echnical Information Appendix ENGLISH - 103 Serial terminal The serial connector which is on the connector panel of the projector conforms to the RS-232C interface specication, so that the projector can be controlled by a personal computer which is connected to this connector . J Connection J Pin assignments and signal names D-Sub 9-pin (femal[...]

T echnical Information 104 - ENGLISH Appendix J Basic format T ransmission from the computer begins with STX, then the command, parameter , and ETX are sent in this order . Add parameters according to the details of control. STX C1 C2 C3 : P1 P2 Pn ETX When sending commands without parameters, a colon (:) is not necessary . :  J Basic format (wi[...]

T echnical Information Appendix ENGLISH - 105 J Cable specications [When connected to a computer] Projector 1 NC NC 1 Computer (DTE specications) 2 2 3 3 4 NC NC 4 5 5 6 NC NC 6 7 7 8 8 9 NC NC 9 J Control commands When controlling the projector from a computer , the following commands are available: [Projector control command] Command Contro[...]

T echnical Information 106 - ENGLISH Appendix Other terminals Pin assignments and signal names of <S-VIDEO IN> terminal J Outside view Pin No. Signal names GND (luminance signal) GND (color signal) Luminance signal Color signal Pin assignments and signal names of <RGB> terminal J Outside view Pin No. Signal names : Not assigned - , , : [...]

T echnical Information Appendix ENGLISH - 107 Pin assignments and signal names of <DVI-D> terminal J Outside view Pin No. Pin No. Signal names 1 T .M.D.S. Data2– 15 Ground (for +5V) 2 T .M.D.S. Data2+ 16 Hot Plug Detect 3 T .M.D.S. Data2 Shield 17 T .M.D.S. Data0– 6 DDC Clock 18 T .M.D.S. Data0+ 7 DDC Data 19 T .M.D.S. Data0 Shield 9 T .M[...]

T echnical Information 108 - ENGLISH Appendix List of Picture in Picture o : Picture in Picture combinations are enabled. x : Picture in Picture combinations are disabled Note When the input signal(s) is/are incompatible, z X mark will be displayed on the Main/Sub picture . Depending on the frequency or signal type of PC/A V input, the display reso[...]

T echnical Information Appendix ENGLISH - 109 List of compatible signals The following table species the types of signals compatible with the projectors. Format : V = VIDEO, S = S-VIDEO, C = COMPUTER, Y = YP B P R , H = HDMI, D = DVI-D Mode Display resolution * 1 (dots) Scanning frequency Dot clock frequency (MHz) Picture quality * 2 PnP* 3 Form[...]

T echnical Information 1 10 - ENGLISH Appendix Mode Display resolution * 1 (dots) Scanning frequency Dot clock frequency (MHz) Picture quality * 2 PnP* 3 Format H (kHz) V (Hz) EW630 series EW530 series EX600 series EX500 series EZ570 series SVGA 800 x 600 38.000 60.510 40.128 A A A C 38.600 60.310 38.600 A A A 32.700 51.090 32.700 A A A 38.000 60.5[...]

T echnical Information Appendix ENGLISH - 111 Mode Display resolution * 1 (dots) Scanning frequency Dot clock frequency (MHz) Picture quality * 2 PnP* 3 Format H (kHz) V (Hz) EW630 series EW530 series EX600 series EX500 series EZ570 series WXGA 1 280 x 800 49.600 60.050 79.360 AA A A C 41.200 50.000 68.557 AA A A 49.702 59.810 83.500 AA A A ○ * 4[...]

T echnical Information 1 12 - ENGLISH Appendix Mode Display resolution * 1 (dots) Scanning frequency Dot clock frequency (MHz) Picture quality * 2 PnP* 3 Format H (kHz) V (Hz) EW630 series EW530 series EX600 series EX500 series EZ570 series D-VGA 640 x 480 31.470 59.940 25.175 A A A ○ H/D D-XGA 1 024 x 768 43.363 60.000 65.000 A AA A ○ D-SVGA 8[...]

T echnical Information Appendix ENGLISH - 1 13 “i” added to the resolution value indicates an interlaced signal. *1 : Picture quality is indicated by the following symbols. *2 : AA: Maximum picture quality can be obtained. A: Signals are converted by the image processing circuit. B: Some loss of data occurs to make projection easier . Where mar[...]

1 14 - ENGLISH Appendix Specications Model No. EW530 series EW630 series EX500 series EX600 series EZ570 series Power supply AC100 V - 240 V 50 Hz/60 Hz Power consumption 100 V - 240 V 4.9 A-2.0 A 490 W When [Standby mode] of [Setting] is set to [ECO]: 0.4W When [Standby mode] of [Setting] is set to [Network]: 1 1W When [Standby mode] of [Settin[...]

Specications Appendix ENGLISH - 1 15 Model No. EW530 series EW630 series EX500 series EX600 series EZ570 series T erminals INPUT 1 <DVI-D> <HDMI> <RGB>  Choose one item in the menu DVI-D 24-pin (Single link), DVI 1.0 compatible, HDCP compatible HDMI 19-pin (HDCP and Deep color compatible) D-sub HD 15-pin (female) [RGB signal[...]

1 16 - ENGLISH Appendix Dimensions <Unit : mm (inch)> 38.8 (1.53 " ) 69.6 (2.74 " ) 80.4 (3.17 " ) 38.8 (1.53 " ) 84.0 (3.31 " ) 332.2 (13.08 " ) 244.8 (9.64 " ) 157.3 (6.19 " ) 1 15.6 (4.55 " ) 170.0 (7.00 " ) 489.5 (19.27 " ) 178.5 (7.03 " ) 153.3 (6.04 " ) 232.4 (9.15 " [...]

Appendix ENGLISH - 1 17 Index A About Y our Projector....................... 18 Accessing from the Web browser ... 75 Accessories .................................... 16 Adjusting front adjustable feet ........ 33 Adjusting the image ........................ 40 AUTO PC adjust ............................. 51 B Background ...........................[...]

These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries should not be mixed with general household waste. For proper treatment, recovery and recycling of old products and used batteries, please take them to applicable collection points, in accordance with your national [...]