Panasonic PT-RW330U инструкция обслуживания

Thank you for purchasing this Panasonic product. ■ Before operating this product, please read the instructions carefully and save this manual for future use. ■ Before using your projector , be sure to read “Read this rst!” ( x pages 2 to 8). Model No. PT-RZ370U PT-RW330U TQBJ0490 DLP TM Projector Commercial Use Operating Instructions Fun[...]

2 - ENGLISH Read this rst! Read this rst! W ARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DONOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. Power Supply: This Projector is designed to operate on 100 V - 240 V , 50 Hz/60 Hz AC, house current only . CAUTION: The AC power cord which is supplied with the projector as an accessory can only be[...]

ENGLISH - 3 Read this rst! FCC NOTICE (USA) Declaration of Conformity Model Number: PT -RZ370U/PT -RW330U T rade Name: Panasonic Responsible Party: Panasonic Corporation of North America Address: One Panasonic W ay , Secaucus, NJ 07094 T elephone number: (877)803-8492 E-mail: projectorsupport@us.panasonic.com This device complies with Part 15 of[...]

4 - ENGLISH Read this rst! W ARNING:  PO WER The wall outlet or the circuit breaker shall be installed near the equi pment and shall be easily accessible when problems occur . If the following problems occur , cut off the power supply immediately . Continued use of the projector in these conditions will result in re or electric shock. z If[...]

ENGLISH - 5 Read this rst! W ARNING: Do not cover the air intake/exhaust ports or place anything within 500 mm (20") of them. Doing so will cause the projector to overheat, which can cause re or damage to the projector . z Do not place the projector in narrow , badly ventilated places. z Do not place the projector on cloth or papers, as [...]

6 - ENGLISH Read this rst! W ARNING:  ACCESSORI ES Do not use or handle the batteries improperly , and refer to the following. Failure to observe this will cause burns, batteries to leak, overheat, explode or catch re. z Use AA/R6/LR6 batteries. z Do not use unspecied batteries. z Do not use chargeable batteries. z Do not disassemble dr[...]

ENGLISH - 7 Read this rst! CAUTION:  PO WER When disconnecting the power cord, be sure to hold the power plug and power connector . If the power cord itself is pulled, the lead will become damaged, and re, short-circuits or serious electric shocks will result. When not using the projector for an extended period of time, disconnect the powe[...]

8 - ENGLISH Read this rst! Brazil Only Brasil Apenas  Manuseio de b at eria s usada s BR A SIL Após o uso, as pilhas e /ou baterias poderão ser entregues ao estabelecimento comercial ou rede de assistência técnica autorizada. Cobrir os terminais positivo (+) e negativo (-) com uma ta isolante adesiva, antes de depositar numa caixa dest[...]

ENGLISH - 9 r T rademarks f SOLID SHINE is a trademark of Panasonic Corporation. f Windows ® , Windows Vista ® , and Internet Explorer ® are registered trademarks or trademarks of Microsoft Corporation in the United States and other countries. f Mac, Mac OS, OS X, and Safari are registered trademarks of Apple Inc. in the United States and other [...]

10 - ENGLISH Features of the Projector Easy setup and improved serviceability ▶ A highly exible setup is achieved with a 2x zoom lens, wide range of the lens shift, and DIGIT AL LINK ( x page 16) compatibility . Long-life reliability achieved ▶ The reliability is enhanced through the power-driving and unique cooling control system that maxim[...]

ENGLISH - 1 1 Contents Contents Be sure to read “Read this rst!” from page 2. Read this rst! ............................................ 2 Chapter 1 Preparation Precautions for use ................................................. 14 Cautions when transporting .................................. 14 Cautions when installing ...............[...]

12 - ENGLISH Contents [DISPLA Y OPTION] menu ........................................ 59 [COLOR MA TCHING] ........................................... 59 [SCREEN SETTING] (only for PT -RW330U) ........ 60 [AUTO SIGNAL] ................................................... 61 [AUTO SETUP] ..................................................... 61 [COMPU[...]

ENGLISH - 13 Chapter 1 Preparation This chapter describes things you need to know or check before using the projector .[...]

Chapter 1 Preparation — Precautions for use 14 - ENGLISH Precautions for use Cautions when transporting f When transporting the projector , hold it securely by its bottom and avoid excessive vibration and impacts. Doing so may damage the internal components and result in malfunctions. f Do not transport the projector with the adjustable feet exte[...]

Chapter 1 Preparation — Precautions for use ENGLISH - 15 r Cautions when setting up the projector f T o install and use the projector via a method that does not use the adjustable feet in a oor standing installation, x the projector using the four screw holes for ceiling mounting (as shown in the gure). (Screw diameter: M4, tapping depth[...]

Chapter 1 Preparation — Precautions for use 16 - ENGLISH f Panasonic Corporation or its afliate companies will never ask for your password directly . Do not divulge your password in case you receive such inquiries. f The connecting network must be secured by a rewall, etc. f Set a password for the web control and restrict the users who can [...]

Chapter 1 Preparation — Precautions for use ENGLISH - 17 Accessories Make sure that the following accessories are provided with your projector . Numbers enclosed in < > show the number of accessories. Wireless remote control unit <1> (N2QA YB000812) Power cord <1> (TXFSX01RWDZ) CD-ROM <1> (TXFQB02VLF1) AA/R6 or AA/LR6 batt[...]

Chapter 1 Preparation — Start-up display 18 - ENGLISH Start-up display The initial setting screen is displayed when the projector is switched on for the rst time after purchase as well as when [ALL USER DA T A] ( x page 81) in [INITIALIZE] is executed. Set them in accordance with circumstances. In other occasions, you can change the settings b[...]

Chapter 1 Preparation — About your projector ENGLISH - 19 About your projector Remote control                 $WWDFKDVWUDSDFFRUGLQJWR XVDJHFRQGLWLRQ )URQW 7R S 1 Remote control indicator Flashes if any button in the remote control is pressed. 2 Power < v [...]

Chapter 1 Preparation — About your projector 20 - ENGLISH Projector body                    )URQW )URQW )URQW 6LGH 5HDU    )URQW %RWWRP 1 Power indicator <ON (G)/ST ANDBY (R)> Displays the status of the power . 2 Light source indic[...]

Chapter 1 Preparation — About your projector ENGLISH - 21 r Control panel 3 4 1 2 1 Power < v / b > button Sets the projector to the state where the projector is switched off (standby mode) when the <MAIN POWER> switch on the projector is set to <ON> and in projection mode. Also sets the projector in projection mode when the pow[...]

Chapter 1 Preparation — Using the remote control 22 - ENGLISH Using the remote control Inserting and removing the batteries (i) (ii) Fig. 1 Fig. 2 1) Open the cover . (Fig. 1) 2) Insert the batteries and close the cover (insert the m side first). (Fig. 2) f When removing the batteries, perform the steps in reverse order . Setting the remote contr[...]

ENGLISH - 23 Chapter 2 Getting Started This chapter describes things you need to do before using the projector such as the setup and connections.[...]

Chapter 2 Getting Started — Setting up 24 - ENGLISH Setting up Projection method Y ou can use the projector with any of the following four projection methods. Select the appropriate method depending on the environment. Mounting on the ceiling and projecting forward Setting on a desk/oor and projecting from rear (Using the translucent screen) M[...]

Chapter 2 Getting Started — Setting up ENGLISH - 25 Screen size and throw distance Refer to the following gures and table describing projection distances to install the projector . Image size and image position can be adjusted in accordance with the screen size and screen position. 6' // : /7  // : /7  6: 6+ 6+ 6: [...]

Chapter 2 Getting Started — Setting up 26 - ENGLISH For PT -RW330U (The dimensions of the following table contain a slight error .) (Unit: m) Projection screen size 4:3 aspect ratio 16:9 aspect ratio 16:10 aspect ratio Diagonal (SD) Min. projection distance (L W) Max. projection distance (L T) Min. projection distance (L W) Max. projection distan[...]

Chapter 2 Getting Started — Connecting ENGLISH - 27 Connecting Before connecting f Before connecting, carefully read the operating instructions for the external device to be connected. f T urn off the power of all devices before connecting cables. f T ake note of the following points before connecting the cables. Failure to do so may result in ma[...]

Chapter 2 Getting Started — Connecting 28 - ENGLISH <HDMI IN> terminal pin assignments and signal names Outside view Pin No. Signal name Pin No. Signal name Even-numbered pins (2) to (18) (1) (19) (2) (18) Odd-numbered pins (1) to (19) (1) T .M.D.S data 2+ (1 1) T .M.D.S clock shield (2) T .M.D.S data 2 shield (12) T .M.D.S clock - (3) T .M[...]

Chapter 2 Getting Started — Connecting ENGLISH - 29 Connecting example: Computers &RPSXWHU &RPSXWHU &RPSXWHU &RPSXWHU &RQWUROFRPSXWHU &RQWUROFRPSXWHU Attention f When connecting the projector to a computer or an external device, use the power cord supplied with each device and commercially available shielded cables. [...]

Chapter 2 Getting Started — Connecting 30 - ENGLISH Attention f Always use one of the following when connecting a VCR. g A VCR with built-in time base corrector (TBC) g A time base corrector (TBC) between the projector and the VCR f If nonstandard burst signals are connected, the image may be distorted. In such case, connect the time base correct[...]

ENGLISH - 31 Chapter 3 Basic Operations This chapter describes basic operations to start with.[...]

Chapter 3 Basic Operations — Switching on/off the projector 32 - ENGLISH Switching on/off the projector Connecting the power cord Make sure that the supplied power cord is securely xed to the projector body to prevent it from being removed easily . Conrm that the <MAIN POWER> switch is on the <OFF> side before connecting the pow[...]

Chapter 3 Basic Operations — Switching on/off the projector ENGLISH - 33 Indicator status Status Off The main power is switched off. Red Flashing The power is switched off (in standby mode). [ST ANDBY MODE] is set to [NORMAL]. Projection will start when the power < v / b > button is pressed. f The projector may not operate when the temperat[...]

Chapter 3 Basic Operations — Switching on/off the projector 34 - ENGLISH Making adjustments and selections It is recommended that images are projected continuously for at least 30 minutes before the focus is adjusted. 3) 2) 1) 2) 1) 4) 1) Set the initial settings. ( x page 18) f The initial setting screen is displayed when the projector is switch[...]

Chapter 3 Basic Operations — Projecting ENGLISH - 35 Projecting Check the external device connections ( x page 27) and the power cord connection ( x page 32), and turn on the projector ( x page 33) to start projecting. Select the video for projection, and adjust appearance of the projected image. Selecting the input signal Select an input signal.[...]

Chapter 3 Basic Operations — Projecting 36 - ENGLISH Adjustment range by the lens position shift (optical shift) Perform the lens position shift within the adjustment range. The focus may change when the lens position is shifted out of the adjustment range. This is because the movement of the lens is restricted to protect the optical parts. Proje[...]

Chapter 3 Basic Operations — Operating with the remote control ENGLISH - 37 Operating with the remote control Using the A V mute function If the projector is not used for a certain period of time during the meeting intermission, for example, it is possible to turn off the audio and video temporarily . button 1) Press the <A V MUTE> button. [...]

Chapter 3 Basic Operations — Operating with the remote control 38 - ENGLISH Switching the input The input for projection can be switched. button 1) Press the input selection (<COMPUTER>, <DVI-I>, <VIDEO>, <DIGIT AL LINK>, <HDMI>) buttons. f This operation can be also performed using the <INPUT SELECT> button on[...]

Chapter 3 Basic Operations — Operating with the remote control ENGLISH - 39 Using the Function button Frequently used operations can be assigned to the buttons from <FUNC1> to <FUNC3> on the remote control to be used as simple shortcut buttons. buttons 1) Press the <FUNC1> to <FUNC3> buttons. When assigning operations to t[...]

40 - ENGLISH Chapter 4 Settings This chapter describes the settings and adjustments you can make using the on-screen menu.[...]

Chapter 4 Settings — Menu navigation ENGLISH - 41 Menu navigation The on-screen menu (Menu) is used to perform various settings and adjustments of the projector . Navigating through the menu Operating procedure button 1) Press the <MENU> button on the remote control or control panel. f The [MAIN MENU] screen is displayed. (17(5 0$,10(18 [...]

Chapter 4 Settings — Menu navigation 42 - ENGLISH Note f Pressing the <RETURN> button or the <MENU> button when the menu screen is displayed returns to the previous menu. f Some items may not be adjusted or used for certain signal formats to be input to the projector . The menu items that cannot be adjusted or used are shown in gray c[...]

Chapter 4 Settings — Menu navigation ENGLISH - 43 Main menu item Page [TEST P A TTERN] 82 [SIGNAL LIST] 83 [SECURITY] 85 [NETWORK] 88 [DIGIT AL LINK] 107 Sub-menu The sub-menu of the selected main menu item is displayed, and you can set and adjust items in the sub-menu. [PICTURE] Sub-menu item Factory default Page [PICTURE MODE] [GRAPHIC] *1 46 [[...]

Chapter 4 Settings — Menu navigation 44 - ENGLISH Note f Sub-menu items and factory default settings differ depending on the input terminal that is selected. [DISPLA Y LANGUAGE] Details ( x page 58) [DISPLA Y OPTION] Sub-menu item Factory default Page [COLOR MA TCHING] [OFF] 59 [SCREEN SETTING] *1 ― 60 [AUTO SIGNAL] [OFF] 61 [AUTO SETUP] ― 61[...]

Chapter 4 Settings — Menu navigation ENGLISH - 45 [TEST P A TTERN] Details ( x page 82) [SIGNAL LIST] Details ( x page 83) [SECURITY] Sub-menu item Factory default Page [SECURITY P ASSWORD] [OFF] 85 [SECURITY P ASSWORD CHANGE] ― 85 [TEXT DISPLA Y] [OFF] 86 [TEXT CHANGE] ― 86 [MENU LOCK] [OFF] 86 [MENU LOCK P ASSWORD] ― 86 [CONTROL DEVICE SE[...]

Chapter 4 Settings — [PICTURE] menu 46 - ENGLISH [PICTURE] menu On the menu screen, select [PICTURE] from the main menu, and select the item from the sub-menu. Refer to “Navigating through the menu” ( x page 41) for the operation of the menu screen. f After selecting the item, press asqw to set. [PICTURE MODE] Y ou can switch to the desired p[...]

Chapter 4 Settings — [PICTURE] menu ENGLISH - 47 [BRIGHTNESS] Y ou can adjust the dark (black) part of the projected image. 1) Press as to select [BRIGHTNESS]. 2) Press qw or the <ENTER> button. f The [BRIGHTNESS] individual adjustment screen is displayed. 3) Press qw to adjust the level. Operation Adjustment Range Press the w button. Incre[...]

Chapter 4 Settings — [PICTURE] menu 48 - ENGLISH Note f When [COLOR MA TCHING] ( x page 59) adjustment is set to other than [OFF], [COLOR TEMPERA TURE] is xed to [USER]. Adjusting desired white balance 1) Press as to select [COLOR TEMPERA TURE]. 2) Press qw or the <ENTER> button. f The [COLOR TEMPERA TURE] individual adjustment screen is[...]

Chapter 4 Settings — [PICTURE] menu ENGLISH - 49 Note f When a name is changed, display of the [USER] menu is also changed. [DA YLIGHT VIEW] Y ou can correct the image to the optimal vividness even if it is projected under a bright light. 1) Press as to select [DA YLIGHT VIEW]. 2) Press qw or the <ENTER> button. f The [DA YLIGHT VIEW] indiv[...]

Chapter 4 Settings — [PICTURE] menu 50 - ENGLISH [SYSTEM SELECTOR] The projector will automatically detect the input signal, but you can set the system method manually when an unstable signal is input. Set the system method matching the input signal. 1) Press as to select [SYSTEM SELECTOR]. 2) Press the <ENTER> button. 3) Press as to select[...]

Chapter 4 Settings — [POSITION] menu ENGLISH - 51 [POSITION] menu On the menu screen, select [POSITION] from the main menu, and select the item from the sub-menu. Refer to “Navigating through the menu” ( x page 41) for the operation of the menu screen. f After selecting the item, press asqw to set. Note f When the input is set to DIGIT AL LIN[...]

Chapter 4 Settings — [POSITION] menu 52 - ENGLISH [ASPECT] Y ou can switch the aspect ratio of the image. The aspect ratio is switched within the screen range selected in [SCREEN SETTING]. Set [SCREEN SETTING] rst. ( x page 60) [SCREEN SETTING] is available only on PT -RW330U. 1) Press as to select [ASPECT]. 2) Press qw or the <ENTER> bu[...]

Chapter 4 Settings — [POSITION] menu ENGLISH - 53 Note f When [ASPECT] is set to [NA TIVE], [ZOOM] cannot be adjusted. When [ASPECT] is set to [NORMAL] 1) Press as to select [ZOOM]. 2) Press the <ENTER> button. f The [ZOOM] screen is displayed. 3) Press as to select [MODE]. 4) Press qw to switch [MODE]. [INTERNAL] Enlarges the size within t[...]

Chapter 4 Settings — [POSITION] menu 54 - ENGLISH [KEYSTONE] Y ou can correct the trapezoidal distortion that occurs when the projector is installed tilted or when the screen is tilted. 1) Press as to select [KEYSTONE]. 2) Press qw or the <ENTER> button. f The [KEYSTONE] individual adjustment screen is displayed. 3) Press qw to adjust. Item[...]

Chapter 4 Settings — [ADV ANCED MENU] menu ENGLISH - 55 [ADV ANCED MENU] menu On the menu screen, select [ADV ANCED MENU] from the main menu, and select the item from the sub-menu. Refer to “Navigating through the menu” ( x page 41) for the operation of the menu screen. f After selecting the item, press asqw to set. [DIGIT AL CINEMA REALITY] [...]

Chapter 4 Settings — [ADV ANCED MENU] menu 56 - ENGLISH Blanking correction Item Operation Adjustment Range Left side of the screen [LEFT] Press the w button. The blanking zone moves to the right. Left and right: 0 (lower limit) Press the q button. The blanking zone moves to the left. Right side of the screen [RIGHT] Press the q button. The blank[...]

Chapter 4 Settings — [ADV ANCED MENU] menu ENGLISH - 57 [FRAME RESPONSE] If 1 080/60i, 1 080/50i, or 1 080/24sF signals are input, the video frame delay can be shortened by simplifying video processing. 1) Press as to select [FRAME RESPONSE]. 2) Press qw to switch [FRAME RESPONSE]. f The items will switch each time you press the button. [NORMAL] [...]

Chapter 4 Settings — [DISPLA Y LANGUAGE] menu 58 - ENGLISH [DISPLA Y LANGUAGE] menu On the menu screen, select [DISPLA Y LANGUAGE] from the main menu, and display the sub- menu. Refer to “Navigating through the menu” ( x page 41) for the operation of the menu screen. f Press as to select a language, and press the <ENTER> button to set. [...]

Chapter 4 Settings — [DISPLA Y OPTION] menu ENGLISH - 59 [DISPLA Y OPTION] menu On the menu screen, select [DISPLA Y OPTION] from the main menu, and select the item from the sub-menu. Refer to “Navigating through the menu” ( x page 41) for the operation of the menu screen. f After selecting the item, press asqw to set. [COLOR MA TCHING] Y ou [...]

Chapter 4 Settings — [DISPLA Y OPTION] menu 60 - ENGLISH Adjusting the color matching using a colorimeter Use a colorimeter that can measure chromaticity coordinates and luminance to change the colors [RED], [GREEN], [BLUE], [CY AN], [MAGENT A], [YELLOW], or [WHITE] to desired colors. 1) Press as to select [COLOR MA TCHING]. 2) Press qw to select[...]

Chapter 4 Settings — [DISPLA Y OPTION] menu ENGLISH - 61 [AUTO SIGNAL] Set automatic execution of auto setup. The screen display position or signal level can be adjusted automatically without pressing the <AUT O SETUP> button on the remote control on each occasion if you input unregistered signals frequently at meetings, etc. 1) Press as to[...]

Chapter 4 Settings — [DISPLA Y OPTION] menu 62 - ENGLISH [DVI-I IN] Switch the setting when the external equipment is connected to the <DVI-I IN> terminal of the projector and the image is not projected correctly . When digital signals are input 1) Press as to select [DVI-I IN]. 2) Press the <ENTER> button. f The [DVI-I IN] screen is [...]

Chapter 4 Settings — [DISPLA Y OPTION] menu ENGLISH - 63 [HDMI IN] Switch the setting when an external device is connected using the <HDMI IN> terminal of the projector and t he image is not projected correctly . 1) Press as to select [HDMI IN]. 2) Press the <ENTER> button. f The [HDMI IN] screen is displayed. 3) Press qw to switch [S[...]

Chapter 4 Settings — [DISPLA Y OPTION] menu 64 - ENGLISH 4) Press qw to switch [OSD POSITION]. f The items will switch each time you press the button. [5] Sets to the center of the screen. [6] Sets to the bottom center of the screen. [7] Sets to the upper right of the screen. [8] Sets to the right center of the screen. [9] Sets to the right botto[...]

Chapter 4 Settings — [DISPLA Y OPTION] menu ENGLISH - 65 Setting [INPUT GUIDE] Set display of the input guide (display of the currently selected input terminal name, signal name, and memory number) in the position set by the [OSD POSITION]. 1) Press as to select [ON-SCREEN DISPLA Y]. 2) Press the <ENTER> button. f The [ON-SCREEN DISPLA Y] s[...]

Chapter 4 Settings — [DISPLA Y OPTION] menu 66 - ENGLISH 4) Press qw to switch [MODE]. f The items will switch each time you press the button. [CC1] Displays CC1 data. [CC2] Displays CC2 data. [CC3] Displays CC3 data. [CC4] Displays CC4 data. Note f Closed captions are a function that is mainly used in North America to display text information wi[...]

Chapter 4 Settings — [DISPLA Y OPTION] menu ENGLISH - 67 [SUB MEMOR Y LIST] The projector has a sub memory function that can register the multiple image adjustment data, even if it is recognized as the same signal by the frequency or format of the synchronization signal source. Use this function when you need to adjust the image quality such as s[...]

Chapter 4 Settings — [DISPLA Y OPTION] menu 68 - ENGLISH [A V MUTE] Image and audio are muted when the projector is not used for a certain period of time. 1) Press as to select [A V MUTE]. 2) Press the <ENTER> button. f Press the <RETURN> button to release. Note f The power indicator <ON (G)/ST ANDBY (R)> ashes slowly when th[...]

Chapter 4 Settings — [PROJECTOR SETUP] menu ENGLISH - 69 [PROJECT OR SETUP] menu On the menu screen, select [PROJECTOR SETUP] from the main menu, and select the item from the sub-menu. Refer to “Navigating through the menu” ( x page 41) for the operation of the menu screen. f After selecting the item, press asqw to set. [PROJECTOR ID] The pro[...]

Chapter 4 Settings — [PROJECTOR SETUP] menu 70 - ENGLISH [COOLING CONDITION] Change the fan control depending on the direction of projection. Set [COOLING CONDITION] correctly in accordance with the direction of projection referencing the following gure. Using the light source with incorrect settings may shorten its life. ：  ?[...]

Chapter 4 Settings — [PROJECTOR SETUP] menu ENGLISH - 71 Setting [AUTO POWER SA VE] Set whether to enable the three functions [AMBIENT LIGHT DETECTION], [SIGNAL DETECTION], and [A V MUTE DETECTION]. 1) Press as to select [ECO MANAGEMENT]. 2) Press the <ENTER> button. f The [ECO MANAGEMENT] screen is displayed. 3) Press as to select [AUTO PO[...]

Chapter 4 Settings — [PROJECTOR SETUP] menu 72 - ENGLISH 4) Press qw to switch [ST ANDBY MODE]. f The items will switch each time you press the button. [ECO] Use this setting to reduce power consumption during standby . [NORMAL] Use this setting to use the network function during standby . Note f When set to [ECO], network functions are not avail[...]

Chapter 4 Settings — [PROJECTOR SETUP] menu ENGLISH - 73 3) Select and assign program to each day of week. f Press as to select the day of week, and press qw to select a program number . f Y ou can set the program from No.1 to No.7. “- - -” indicates that the program number has not been set yet. How to set a program Y ou can set up to 16 comm[...]

Chapter 4 Settings — [PROJECTOR SETUP] menu 74 - ENGLISH 12) Press the <ENTER> button. f The command is xed and ● is displayed at the left of the selected command. f After the command is xed, press the <RETURN> button or the <MENU> button to close the detailed setting menu. 13) Press as to select [STORE], and press the &[...]

Chapter 4 Settings — [PROJECTOR SETUP] menu ENGLISH - 75 [DIGIT AL LINK INPUT] Can only be selected when [ST ARTUP INPUT SELECT] is set to [DIGIT AL LINK]. 1) Press as to select [DIGIT AL LINK INPUT]. 2) Press qw to switch [DIGIT AL LINK INPUT]. f The items will switch each time you press the button. [CURRENT] Switches to DIGIT AL LINK input. [IN[...]

Chapter 4 Settings — [PROJECTOR SETUP] menu 76 - ENGLISH Communicating using the <DIGIT AL LINK/LAN> terminal 1) Press as to select [RS-232C]. 2) Press the <ENTER> button. f The [RS-232C] screen is displayed. 3) Press as to select [INPUT SELECT]. 4) Press qw to switch [DIGIT AL LINK]. 5) Press as to select [P ARITY]. 6) Press qw to sw[...]

Chapter 4 Settings — [PROJECTOR SETUP] menu ENGLISH - 77 Note f Refer to “<SERIAL IN> terminal” ( x page 1 18). f When [DIGIT AL LINK] is selected, communication is only available using the serial terminal when the relevant device (such as an optional digital interface box (Model No.: ET -YFB100G)) is connected to the <DIGIT AL LINK/[...]

Chapter 4 Settings — [PROJECTOR SETUP] menu 78 - ENGLISH Setting the audio output during standby 1) Press as to select [AUDIO SETTING]. 2) Press the <ENTER> button. f The [AUDIO SETTING] screen is displayed. 3) Press as to select [IN ST ANDBY MODE]. 4) Press qw to switch [IN ST ANDBY MODE]. f The items will switch each time you press the bu[...]

Chapter 4 Settings — [PROJECTOR SETUP] menu ENGLISH - 79 [ST A TUS] Displays the status of the projector . 1) Press as to select [ST A TUS]. 2) Press the <ENTER> button. f The [ST A TUS] screen is displayed. 3) Press qw to switch the pages. f The page will change each time you press the button. [INPUT] Displays the input terminal currently [...]

Chapter 4 Settings — [PROJECTOR SETUP] menu 80 - ENGLISH Setting the date and time automatically 1) Press as to select [DA TE AND TIME]. 2) Press the <ENTER> button. f The [DA TE AND TIME] screen is displayed. 3) Press as to select [ADJUST CLOCK]. 4) Press the <ENTER> button. f The [ADJUST CLOCK] screen is displayed. 5) Press as to se[...]

Chapter 4 Settings — [PROJECTOR SETUP] menu ENGLISH - 81 [INITIALIZE] Return various setting values to their factory default settings. 1) Press as to select [INITIALIZE]. 2) Press the <ENTER> button. f The [SECURITY P ASSWORD] screen is displayed. 3) Enter a security password and press the <ENTER> button. f The [INITIALIZE] screen is [...]

Chapter 4 Settings — [TEST P A TTERN] menu 82 - ENGLISH [TEST P A TTERN] menu On the menu screen, select [TEST P A TTERN] from the main menu. Refer to “Navigating through the menu” ( x page 41) for the operation of the menu screen. f Press qw to switch. [TEST P A TTERN] Display the test pattern built-in to the projector . Settings of position[...]

Chapter 4 Settings — [SIGNAL LIST] menu ENGLISH - 83 [SIGNAL LIST] menu On the menu screen, select [SIGNAL LIST] from the main menu. Refer to “Navigating through the menu” ( x page 41) for the operation of the menu screen. r Registered signal details f A name can be set for each sub memory ( x page 67). f Memory number: $[...]

Chapter 4 Settings — [SIGNAL LIST] menu 84 - ENGLISH Deleting the registered data Registered signals can be deleted. 1) Press asqw to select the signal to delete. 2) Press the <DEF AUL T> button. f The [ENTR Y SIGNAL DELETE] screen is displayed. f T o cancel the deletion, press the <RETURN> button or the <MENU> button to return [...]

Chapter 4 Settings — [SECURITY] menu ENGLISH - 85 [SECURITY] menu On the menu screen, select [SECURITY] from the main menu, and select the item from the sub-menu. Refer to “Navigating through the menu” ( x page 41) for the operation of the menu screen. f When the projector is used for the rst time Initial password: Press awsqawsq in order [...]

Chapter 4 Settings — [SECURITY] menu 86 - ENGLISH [TEXT DISPLA Y] Overlap the security message (text) over the projecting image. 1) Press as to select [TEXT DISPLA Y]. 2) Press qw to switch [TEXT DISPLA Y]. f The items will switch each time you press the button. [OFF] Hides the security message. [ON] Displays the security message. Note f If a clo[...]

Chapter 4 Settings — [SECURITY] menu ENGLISH - 87 [CONTROL DEVICE SETUP] Enable/disable the button operations on the control panel and the remote control. 1) Press as to select [CONTROL DEVICE SETUP]. 2) Press the <ENTER> button. f The [CONTROL DEVICE SETUP] screen is displayed. 3) Press as to select [CONTROL P ANEL] or [REMOTE CONTROL]. 4)[...]

Chapter 4 Settings — [NETWORK] menu 88 - ENGLISH [NETWORK] menu On the menu screen, select [NETWORK] from the main menu, and select the item from the sub-menu. Refer to “Navigating through the menu” ( x page 41) for the operation of the menu screen. f After selecting the item, press asqw to set. [DIGIT AL LINK MODE] Switch the communication m[...]

Chapter 4 Settings — [NETWORK] menu ENGLISH - 89 7) When the confirmation is displayed, select [OK] or [CANCEL], and press the <ENTER> button. Note f Not compatible with 10BaseT Full/Half. When the projector is connected directly via a twisted-pair-cable transmitter 1) Press as to select [DIGIT AL LINK SETUP]. 2) Press the <ENTER> but[...]

Chapter 4 Settings — [NETWORK] menu 90 - ENGLISH [NETWORK SETUP] Perform the initial setting of the network before using the network function. 1) Press as to select [NETWORK SETUP]. 2) Press the <ENTER> button. f The [NETWORK SETUP] screen is displayed. 3) Press as to select an item, and change the settings according to the operation instru[...]

Chapter 4 Settings — [NETWORK] menu ENGLISH - 91 [NETWORK ST A TUS] Display the status of the projector network. 1) Press as to select [NETWORK ST A TUS]. 2) Press the <ENTER> button. f The [NETWORK ST A TUS] screen is displayed. Network connections The projector has a network function, and the following operations are available from the co[...]

Chapter 4 Settings — [NETWORK] menu 92 - ENGLISH Connecting to a twisted-pair-cable transmitter The projector has a function that can receive Ethernet signals from a twisted-pair-cable transmitter together with video and audio signals via a LAN cable. Connect a LAN cable to the <DIGIT AL LINK/LAN> terminal of the projector . ( x pages 16, 2[...]

Chapter 4 Settings — [NETWORK] menu ENGLISH - 93 Accessing from the web browser 1) Start up the web browser on the computer . 2) Enter the IP address set on the projector into the URL entry field of the web browser . 3) Enter the user name and the password. f The factory default setting of the user name is user1 (user rights)/admin1 (administrato[...]

Chapter 4 Settings — [NETWORK] menu 94 - ENGLISH Descriptions of items 1 2 3 4 5 6 1 Page tab Switches pages by clicking it. 2 [Status] The status of the projector is displayed by clicking this item. 3 [Projector control] The [Projector control] page is displayed by clicking this item. 4 [Detailed set up] The [Detailed set up] page is displayed b[...]

Chapter 4 Settings — [NETWORK] menu ENGLISH - 95 Error information page When [Error (Detail)] is displayed in the self-diagnosis display of the [Projector status] screen, click it to display the error details. f The projector may go into the standby status to protect the projector depending on the contents of the error . >2.@2SHUDWLQJ[...]

Chapter 4 Settings — [NETWORK] menu 96 - ENGLISH [Access error] page Click [Status] → [Access error]. The error log on the WEB server is displayed such as access to the pages that do not exist or access with unauthorized user names or passwords. [Mail error] page Click [Status] → [Mail error]. Displays email error information if the system fa[...]

Chapter 4 Settings — [NETWORK] menu ENGLISH - 97 [Advanced control] page Click [Projector control] → [Advanced control]. 1 2 1 [POSITION] Operates items related to angle of view . 2 [PICTURE] Operates items related to image quality . [Network cong] page Click [Detailed set up] → [Network cong]. f Click [Network cong] to display the [[...]

Chapter 4 Settings — [NETWORK] menu 98 - ENGLISH [Ping test] page Y ou can check whether the network is connected to the E-mail server , POP server , DNS server , etc. Click [Detailed set up] → [Ping test]. 1 2 3 4 1 [Input IP address] Enter the IP address of the server to be tested. 2 [Submit] Executes the connection test. 3 Example of display[...]

Chapter 4 Settings — [NETWORK] menu ENGLISH - 99 [E-mail set up] page When there is a problem, an email can be sent to preset email addresses (up to two addresses). Click [Detailed set up] → [E-mail set up]. 1 2 3 4 5 6 1 [ENABLE] Select [Enable] to use the E-mail function. 2 [SMTP SER VER NAME] Enter the IP address or the server name of the E-[...]

Chapter 4 Settings — [NETWORK] menu 100 - ENGLISH 11 10 9 9 [E-MAIL ADDRESS 2] Enter the E-mail address to be sent when two E-mail addresses are to be used. Leave it blank when two E-mail addresses are not to be used. 10 Settings of the conditions to send E-mail Select the conditions to send E-mail to the second E-mail address. [MAIL CONTENTS]: S[...]

Chapter 4 Settings — [NETWORK] menu ENGLISH - 101 Contents of mail sent Example of E-mail sent when E-mail is set The following E-mail is sent when the E-mail settings have been established. === Panasonic projector report(CONFIGURE) === Projector T ype : RW330 Serial No : SW1234567 ----- E-mail setup data ----- TEMPERA TURE WARNING SETUP MINIMUM [...]

Chapter 4 Settings — [NETWORK] menu 102 - ENGLISH Example of the E-mail sent for an error The following E-mail is sent when an error has occurred. === Panasonic projector report(ERROR) === Projector T ype : RW330 Serial No : SW1234567 ----- check system ----- MAIN CPU BUS [ OK ] F AN [ OK ] INT AKE AIR TEMPERA TURE [ OK ] OPTICS MODULE TEMPERA TU[...]

Chapter 4 Settings — [NETWORK] menu ENGLISH - 103 User name [Change password] page Click [Change password]. 1 2 3 1 [Administrator] Used to change the setting of [Administrator]. 2 [User] Used to change the setting of [User]. 3 [Next] Used to change the setting of the password. [Administrator] account 1 2 3 4 5 6 7 1 [Account] Displays the accoun[...]

Chapter 4 Settings — [NETWORK] menu 104 - ENGLISH [User] account 1 2 3 5 4 1 [Account] Displays the account to change. 2 [New][User name] Enter the desired new user name. (Up to 16 characters in single byte) 3 [New][Password] Enter the desired new password. (Up to 16 characters in single byte) 4 [New][Password(Retype)] Enter the desired new passw[...]

Chapter 4 Settings — [NETWORK] menu ENGLISH - 105 [CRESTRON RoomView] page The projector can be monitored and/or controlled with RoomView . T o start the RoomView control page from the web control screen, you need to access with the administrator rights. (For user rights, the [CRESTRON RoomView] button is not displayed on the web control screen.)[...]

Chapter 4 Settings — [NETWORK] menu 106 - ENGLISH [Info] page Click [Info] on the control page. 4 5 6 7 1 2 3 8 1 [Projector Name] Displays the projector name. 2 [Mac Address] Displays the MAC address. 3 [Lamp Hours] Displays the cumulative operating time (converted value) of the projector . 4 [Power Status] Displays the status of the power . 5 [[...]

Chapter 4 Settings — [DIGIT AL LINK] menu ENGLISH - 107 [DIGIT AL LINK] menu On the menu screen, select [DIGIT AL LINK] from the main menu. Refer to “Navigating through the menu” ( x page 41) for the operation of the menu screen. Switch the input to DIGIT AL LINK. Note f When the optional digital interface box (Model No.: ET -YFB100G) is conn[...]

108 - ENGLISH Chapter 5 Maintenance This chapter describes inspection when there are problems, and maintenance methods.[...]

Chapter 5 Maintenance — Light source/temperature indicator ENGLISH - 109 Light source/temperature indicator Managing the indicated problems If a problem should occur inside the projector , the light source indicator <LIGHT>/temperature indicator <TEMP> will inform you by lighting or ashing. Check the status of the indicators and ma[...]

Chapter 5 Maintenance — Light source/temperature indicator 1 10 - ENGLISH T emperature indicator <TEMP> Indicator status Lighting in red Flashing in red (1 time) Flashing in red (2 time) Flashing in red (3 time) Status W arm-up status Internal temperature is high (warning). Internal temperature is high (during projection). Internal temperat[...]

Chapter 5 Maintenance — Maintenance ENGLISH - 1 1 1 Maintenance Before maintaining the projector f Make sure to turn off the power before maintaining the projector . ( x pages 32, 34) f When switching off the projector , make sure to follow the procedures in “Switching off the projector” ( x page 34). Maintenance Outer case Wipe off dirt and [...]

Chapter 5 Maintenance — T roubleshooting 1 12 - ENGLISH T roubleshooting Review the following points. For details, refer to the corresponding pages. Problems Points to be checked Page Power does not turn on. f Is the power plug rmly inserted into the outlet? ― f Is the <MAIN POWER> switch turned <OFF>? 34 f Is the wall outlet sup[...]

Chapter 5 Maintenance — T roubleshooting ENGLISH - 1 13 Attention f If problems persist even after checking the preceding points, consult your dealer .[...]

1 14 - ENGLISH Chapter 6 Appendix This chapter describes specications and after-sales service for the projector .[...]

Chapter 6 Appendix — T echnical information ENGLISH - 1 15 T echnical information PJLink protocol The network function of this projector supports the PJLink class 1, and the PJLink protocol can be used to perform projector setting and projector status query operations from a computer . Control commands The following table lists the PJLink protoco[...]

Chapter 6 Appendix — T echnical information 1 16 - ENGLISH Control commands via LAN When web control administrator rights password is set (Protect mode) Connecting 1) Obtain the IP address and port number (Initial set value = 1024) of the projector and request for a connection to the projector . f Y ou can obtain both the IP address and the port [...]

Chapter 6 Appendix — T echnical information ENGLISH - 1 17 r Error response Character string Details T ermination symbol Message “ERR1” Undened control command (CR) 0x0d “ERR2” Out of parameter range “ERR3” Busy state or no-acceptable period “ERR4” T imeout or no-acceptable period “ERR5” Wrong data length “ERRA” Passwor[...]

Chapter 6 Appendix — T echnical information 1 18 - ENGLISH r Error response Character string Details T ermination symbol Message “ERR1” Undened control command (CR) 0x0d “ERR2” Out of parameter range “ERR3” Busy state or no-acceptable period “ERR4” T imeout or no-acceptable period “ERR5” Wrong data length “ERRA” Passwor[...]

Chapter 6 Appendix — T echnical information ENGLISH - 1 19 Communication conditions (Factory default) Signal level RS-232C-compliant Sync. method Asynchronous Baud rate 9 600 bps Parity None Character length 8 bits Stop bit 1 bit X parameter None S parameter None Basic format T ransmission from the computer starts with STX, then the ID, command, [...]

Chapter 6 Appendix — T echnical information 120 - ENGLISH Cable specication  1&  1&     1&  1&    1&  1&     1&  1&  :KHQFRQQHFWHGWRDFRPSXWHU 3URMHFWRU6(5,$/,1! WHUPLQDO &RPSXWHU&apos[...]

Chapter 6 Appendix — T echnical information ENGLISH - 121 List of compatible signals The following table species the types of signals compatible with the projector . f Signals that show formats are as follows. g V : Video g R: RGB g Y : YC B C R /YP B P R g D: DVI-I g H: HDMI Mode Resolution (Dots) Scanning frequency Dot clock freq. (MHz) Form[...]

Chapter 6 Appendix — T echnical information 122 - ENGLISH Mode Resolution (Dots) Scanning frequency Dot clock freq. (MHz) Format Plug and play *1 Horizontal (kHz) V ertical (Hz) COMPUTER/ DVI-I Analog EDID DVI-I digital HDMI/ DIGIT AL LINK EDID1 EDID2 EDID3 SXGA 1 280 x 1 024 64.0 60.0 108.0 R/D/H l ― l l l 1 280 x 1 024 80.0 75.0 135.0 R/D/H l[...]

Chapter 6 Appendix — Specications ENGLISH - 123 Specications The following table describes the specications of the projector . Model No. PT -RZ370U PT -RW330U Power supply AC 100 V - 240 V 50 Hz/60 Hz Power consumption 460 W (5.2 A - 2.0 A) 0.5 W when [ST ANDBY MODE] is set to [ECO] 8 W when [ST ANDBY MODE] is set to [NORMAL] (when fan i[...]

Chapter 6 Appendix — Specications 124 - ENGLISH Model No. PT -RZ370U PT -RW330U Color system 7 standards (NTSC/NTSC4.43/P AL/P AL-N/P AL-M/SECAM/P AL60) Projection screen size 1.02 m (40") - 7.62 m (300") Screen aspect ratio 16:9 16:10 Projection method [FRONT/CEILING], [FRONT/FLOOR], [REAR/CEILING], [REAR/FLOOR] T erminal <COMPUT[...]

Chapter 6 Appendix — Dimensions ENGLISH - 125 Dimensions Units: mm 415.4 (16-11/32") 408.7 (16-3/32") 137 (5-13/32") 128.5 (5-1/16") 125 (4-29/32") 63.5 (2-1/2") 63.5 (2-1/2") 72 (2-27/32") 72 (2-27/32") 455 (17-29/32") * Actual dimensions may differ depending on the product.[...]

Chapter 6 Appendix — Ceiling mount bracket safeguards 126 - ENGLISH Ceiling mount bracket safeguards f When installing the projector to a ceiling, be sure to use the specied ceiling mount bracket (Model No.: ET -PKR100H (for high ceilings), ET -PKR100S (for low ceilings)). f When installing the projector , attach the drop-prevention kit includ[...]

ENGLISH - 127 Index A Accessories ……………………………………… 17 <AC IN> terminal ………………………………… 20 Adjusting adjustable feet ………………………… 26 [ADV ANCED MENU] ……………………… 43, 55 [ASPECT] ………………………………………… 52 [AUDIO SETTING] …………[...]

Information on Disposal in other Countries outside the European Union These symbols are only valid in the European Union. If you wish to discard this product, please contact your local authorities or dealer and ask for the correct method of disposal. Panasonic System Communications Company of North America One Panasonic Way 2F-13, Secaucus, NJ 0709[...]