Panasonic TH-65PF11UK инструкция обслуживания

Before connecting, operating or adjusting this product, please read these instructions completely . Please keep this manual for future reference. English The illustration shown is an image. TH-42PF1 1UK TH-50PF1 1UK TH-58PF1 1UK TH-65PF1 1UK Model No. Número de modelo TQB2AA0804 Antes de conectar , utilizar o ajustar este producto, lea completamen[...]

2 W ARNING: T o reduce the risk of electric shock, do not remove cover or back. No user-serviceable parts inside. Refer servicing to quali fi ed service personnel. The lightning flash with arrow-head within a triangle is in tend ed to tell the user that parts inside the product are a risk of electric shock to per sons. The exclamation point within[...]

3 Important Safety Instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water . 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer ’ s instructions. 8) Do not install near any heat so[...]

4 T able of Contents Dear Panasonic Customer W elcome to the Panasonic family of customers. W e hope that you will have many years of enjoyment fr om your new Plasma Display . T o obtain maximum benefit fr om your set, please r ead these Instructions befor e making any adjustments, and r etain them for futur e r efer ence. Retain your pur chase r e[...]

5 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed an[...]

6 Safety Precautions This Plasma Display is for use only with the following optional accessories. Use with any other type of optional accessories may cause instability which could result in the possibility of injury . (All of the following accessories are manufactured by Panasonic Corporation.) CAUTION When using the Plasma Display Do not bring you[...]

7 Safety Precautions / Maintenance W ARNING The front of the display panel has been specially treated. Wipe the panel surface gently using only a cleaning cloth or a soft, lint-free cloth. • If the surface is particularly dirty , wipe with a soft, lint-free cloth which has been soaked in pure water or water in which neutral detergent has been dil[...]

+ + - - 8 Accessories Requires two AA batteries. 2. Insert batteries - note correct polarity ( + and -). Precaution on battery use Incorrect installation can cause battery leakage and corrosion that will damage the remote control transmitter . Disposal of batteries should be in an environment-friendly manner . Observe the following precautions: 1. [...]

1 2 SERIAL PC IN AUDIO SLOT1 SLOT3 P R /C R /R P B /C B /B Y/G AUDIO RL COMPONENT/RGB IN SLOT2 1 2 1 2 1 2 9 Connections – Cable fi xing band Secure any excess cables with band as required. Note: Make sure that the AC cord is locked on both the left and right sides. Push until the hook clicks. 2. Pull off. 1. Keep the knob pressed. Close Open 1 [...]

AUDIO PC IN TH-42PS9 10 PC Input T erminals connection Notes: • Due to space limitations, occasionally you may have trouble connecting Mini D-sub 15P cable with ferrite core to PC input T erminal. • With regard to the typical PC input signals that are described in the applicable input signals list (see page 51), adjustment values such as for th[...]

SERIAL 6789 13 4 5 2 11 Connections SERIAL T erminals connection Notes: • Use the RS-232C straight cable to connect the computer to the Plasma Display . • The computer shown is for example purposes only . • Additional equipment and cables shown are not supplied with this set. The SERIAL terminal conforms to the RS-232C interface speci fi cat[...]

PC SLOT1 SLOT2 SLOT3 P R /C R /R P B /C B /B Y/G AUDIO RL COMPONENT/RGB IN HDMI A V OUT HDMI A V OUT SLOT3 P R /C R /R P B /C B /B Y/G AUDIO RL COMPONENT/RGB IN AUDIO OUT Y , P B , P R , OUT P R P B Y L R COMPONEN T VIDEO OUT 12 Connections COMPONENT / RGB connection Notes: • Change the “COMPONENT/RGB-IN SELECT” setting in the “SET UP” me[...]

INPUT MENU ENTER/ + / VOL - / 13 Power Indicator Remote Control Sensor Power ON / OFF Connecting the AC cord plug to the Plasma Display . Fix the AC cord plug securely to the Plasma Display with the clamper . (see page 9) Connecting the plug to the W all Outlet. Note: When disconnecting the AC cord, be absolutely sure to disconnect the AC cord plug[...]

PC FULL English (UK) Deutsch Français Italiano Español ENGLISH (US) Русский OSD LANGUAGE PRESENT TIME SETUP PRESENT TIME OF DA Y MON 99:99 SET PRESENT TIME OF DA Y 99:99 DA Y MON PRESENT TIME SETUP PRESENT TIME OF DA Y MON 99:99 SET PRESENT TIME OF DA Y 10:00 DA Y TUE LANDSCAPE PORTRAIT DISPLA Y ORIENT A TION 14 From the second time on, th[...]

1/2 SIGNAL PC OFF ST ANDBY SA VE OFF POWER MANAGEMENT OFF AUTO POWER OFF OFF OSD LANGUAGE ENGLISH ( US ) COMPONENT/RGB-IN SELECT RGB INPUT LABEL POWER SA VE SET UP SCREENSA VER INPUT MENU ENTER/ + / VOL - / INPUT MENU ENTER/ + / VOL - / 15 Initial selections Selecting the On-Screen Menu Language Selecting the input signal Press to display the SET U[...]

INPUT MENU ENTER/ + / VOL - / 16 Basic Controls MENU Screen ON / OFF Each time the MENU button is pressed, the menu screen will switch. (see page 23) INPUT button (INPUT1, INPUT2, INPUT3 and PC selection) (see page 15) Main Power On / Off Switch Power Indicator The Power Indicator will light. • Power-OFF .... Indicator not illuminated (The unit w[...]

17 Standby (ON / OFF) button The Plasma Display must fi rst be plugged into the wall outlet and turned on at the power switch (see page 13). Press ON to turn the Plasma Display On, from Standby mode. Press OFF to turn the Plasma Display Off to Standby mode. SET UP button (see page 23) SOUND button (see page 28) DIRECT INPUT buttons Press the INPUT[...]

INPUT MENU ENTER/ + / VOL - / 18 ASPECT Controls The Plasma Display will allow you to enjoy viewing the picture at its maximum size, including wide screen cinema format picture . Note: Be aware that if you put the display in a public place for commercial purposes or a public showing and then use the aspect mode select function to shrink or expand t[...]

19 Y ou can display two pictures, such as a video image and computer image, in a two-screen display . (Use the remote control for this operation. It cannot be performed with the buttons on the main unit.) MUL TI PIP SETUP Set the functions and mode for two-screen display in “MUL TI PIP SETUP” in the SET UP menu. (see page 36) Selecting the Disp[...]

20 MUL TI PIP Swapping Screens Each time this button is pressed, the main screen and sub screen are swapped. T wo screens (P AND P) Main screen Sub screen T wo screens (P OUT P) T wo screens (P IN P) During Blend PIP (Composite Screen Function) : A composite picture is displayed with the sub screen positioned over the main screen. For example, text[...]

21 MUL TI PIP Selecting the T arget Screen for Operations Each time this button is pressed, the target screen for operations changes. PC INPUT1 PC INPUT1 Main screen Sub screen Main screen input mode Sub screen input mode Operations on the main screen Operations on the sub screen Notes: • When operations are performed for the sub screen, the sub [...]

INPUT MENU ENTER/ + / VOL - / 2 EXIT 2 1 EXIT × 1 × 2 × 3 × 4 22 VOL button Digital Zoom This displays an enlargement of the designated part of the displayed image. Select the area of the image to be enlarged. Press on the enlargement location to select. Return to normal display (quit Digital Zoom). Press to exit from the Digital Zoom. Notes: ?[...]

2/2 ADV ANCED SETTINGS COLOR TEMP COLOR MANAGEMENT NORMAL OFF ON PICTURE 0 NORMAL NORMALIZE AUTO SETUP POS. /SIZE V -POS 0 H-POS V -SIZE DOT CLOCK H-SIZE CLOCK PHASE 1:1 PIXEL MODE OFF 0 0 0 0 1/2 SIGNAL SET UP PC OFF ST ANDBY SA VE OFF POWER MANAGEMENT OFF AUTO POWER OFF OFF OSD LANGUAGE ENGLISH ( US ) COMPONENT/RGB-IN SELECT RGB INPUT LABEL SCREE[...]

0 NORMAL NORMALIZE AUTO SETUP POS. /SIZE V -POS 0 H-POS V -SIZE DOT CLOCK H-SIZE CLOCK PHASE 1:1 PIXEL MODE OFF 0 0 0 0 0 0 0 NORMAL NORMALIZE POS. /SIZE V -POS H-POS 0 V -SIZE H-SIZE 1:1 PIXEL MODE OFF AUTO SETUP 24 Adjusting POS. /SIZE 1 Press to display the POS. /SIZE menu. Press to select the menu to adjust. Press to adjust the menu. Press to e[...]

25 While the POS. /SIZE display is active, if either the N button on the remote control is pressed at any time or the ACTION ( ) button is pressed during “NORMALIZE”, then all adjustment values are returned to the factory settings. Helpful Hint ( / NORMALIZE Normalization) Adjusting POS. /SIZE 1:1 PIXEL MODE Adjusts the display size when 1 125i[...]

2/2 ADV ANCED SETTINGS COLOR TEMP COLOR MANAGEMENT NORMAL OFF ON PICTURE 1/2 25 0 0 0 5 PICTURE NORMAL NORMALIZE ST ANDARD BRIGHTNESS SHARPNESS PICTURE MENU COLOR PICTURE TINT 0 0 2.2 1/2 BLACK EXTENSION AGC GAMMA INPUT LEVEL ADV ANCED SETTINGS NORMAL NORMALIZE OFF 0 0 0 0 0 0 2/2 W/B LOW B W/B HIGH R W/B LOW R W/B LOW G W/B HIGH G W/B HIGH B ADV A[...]

27 PICTURE Adjustments ADV ANCED SETTINGS Notes: • “COLOR” and “TINT” settings cannot be adjusted for “RGB/PC” and “Digital” input signal. • Y ou can change the level of each function (PICTURE, BRIGHTNESS, COLOR, TINT , SHARPNESS) for each PICTURE MENU. • The setting details for ST ANDARD, DYNAMIC and CINEMA respectively are m[...]

0 0 0 1/2 SOUND NORMAL NORMALIZE ST ANDARD OFF TREBLE AUDIO MENU BALANCE BASS 0 MID SURROUND MAIN AUDIO OUT (PIP) 28 SOUND Adjustment Note: BASS, MID, TREBLE and SURROUND settings are memorized separately for each AUDIO MENU. 1 Press to display the SOUND menu. Press to select the menu to adjust. Select the desired level by listening to the sound. P[...]

2/2 SET UP MUL TI DISPLA Y SETUP MUL TI PIP SETUP PORTRAIT SETUP SET UP TIMER PRESENT TIME SETUP DISPLA Y ORIENT A TION LANDSCAPE 29 PRESENT TIME SETUP / SET UP TIMER PRESENT TIME SETUP The timer can switch the Plasma Display ON or OFF . Before attempting T imer Set, con fi rm the PRESENT TIME OF DA Y and adjust if necessary . Then set POWER ON TI[...]

1/2 SIGNAL SCREENSA VER PC OFF ST ANDBY SA VE OFF POWER MANAGEMENT OFF AUTO POWER OFF OFF OSD LANGUAGE ENGLISH ( US ) COMPONENT/RGB-IN SELECT RGB INPUT LABEL POWER SA VE SET UP SCREENSA VER ST ART FUNCTION WOBBLING PEAK LIMIT FINISH TIME ST ART TIME SCROLLING BAR ONL Y 6:15 12:30 OFF OFF SIDE BAR ADJUST BRIGHT PRESENT TIME OF DA Y 99:99 MODE OFF SC[...]

SCREENSA VER ST ART FUNCTION MODE SIDE BAR ADJUST WOBBLING PEAK LIMIT FINISH TIME ST ART TIME SCROLLING BAR ONL Y OFF 6:15 12:30 BRIGHT OFF OFF PRESENT TIME OF DA Y 99:99 SCREENSA VER ST ART FUNCTION MODE WOBBLING PEAK LIMIT FINISH TIME ST ART TIME SCROLLING BAR ONL Y OFF 6:15 12:30 OFF OFF SIDE BAR ADJUST BRIGHT PRESENT TIME OF DA Y 99:99 31 These[...]

1/2 PC OFF ST ANDBY SA VE OFF POWER MANAGEMENT OFF AUTO POWER OFF OFF OSD LANGUAGE ENGLISH ( US ) COMPONENT/RGB-IN SELECT RGB INPUT LABEL SIGNAL SCREENSA VER POWER SA VE SET UP 32 Reduces power consumption Press to select “POWER SA VE” “ST ANDBY SA VE” “POWER MANAGEMENT” “AUTO POWER OFF”. Press to select “ON” or “OFF”. On Of[...]

2/2 SET UP MUL TI DISPLA Y SETUP SET UP TIMER PRESENT TIME SETUP DISPLA Y ORIENT A TION LANDSCAPE MUL TI PIP SETUP PORTRAIT SETUP 1/2 PC OFF ST ANDBY SA VE OFF POWER MANAGEMENT OFF AUTO POWER OFF OFF OSD LANGUAGE ENGLISH ( US ) COMPONENT/RGB-IN SELECT RGB INPUT LABEL SIGNAL SCREENSA VER POWER SA VE SET UP 33 Press to select INPUT LABEL. Press to ch[...]

2/2 SET UP MUL TI DISPLA Y SETUP SET UP TIMER PRESENT TIME SETUP DISPLA Y ORIENT A TION LANDSCAPE MUL TI PIP SETUP PORTRAIT SETUP 34 By lining up Plasma Displays in groups, for example, as illustrated below , an enlarged picture may be displayed across all scre ens. For this mode of operation, each plasma display has to be set up with a Display num[...]

35 Y ou can set the remote control ID when you want to use this remote control on one of several different displays. SET UP for MUL TI DISPLA Y 1 2 3 Switch to on the right side. Press the button on the remote control. Press one of - , for the tens digit setting. Press one of - , for the units digit setting. 4 Notes: • The numbers in 2, 3 and 4 s[...]

— MUL TI PIP DISPLA Y MODE PIP OFF 1 INSERT LEVEL TRANSP ARENCY INSERT 0 % TRANSP ARENCY LEVEL OFF MUL TI PIP SETUP 2/2 SET UP MUL TI DISPLA Y SETUP SET UP TIMER MUL TI PIP SETUP PORTRAIT SETUP 36 MUL TI PIP SETUP Set the two-screen display function that is activated when is pressed. Press to select the MUL TI PIP SETUP . Press to display the “[...]

37 Divide an input image into 3 parts, and display one of them to a plasma display which is set vertically . The image will be enlarged 3 times and rotated 90-degree. SET UP for PORTRAIT (Example) Press to display the SET UP menu. Press to select the PORTRAIT SETUP . Press to display the “PORTRAIT SETUP” menu. Press to select the PORTRAIT SETUP[...]

38 SET UP for PORTRAIT Press to select VIEWING AREA or LOCA TION. Press to select each function. Notes: • For HD signal videos, the “VIEWING AREA” is set at “16:9”, and cannot be changed. HD signal: 1 125 (1080) / 60i • 50i • 60p • 50p • 24p • 25p • 30p • 24sF , 750 (720) / 60p • 50p, 1250 (1080) / 50i • When “VIEWING [...]

1/2 PC OFF ST ANDBY SA VE OFF POWER MANAGEMENT OFF AUTO POWER OFF OFF OSD LANGUAGE ENGLISH ( US ) COMPONENT/RGB-IN SELECT RGB INPUT LABEL SIGNAL SCREENSA VER POWER SA VE SET UP 1/2 PC OFF ST ANDBY SA VE OFF POWER MANAGEMENT OFF AUTO POWER OFF OFF OSD LANGUAGE ENGLISH ( US ) YUV/RGB-IN SELECT RGB INPUT LABEL SIGNAL SCREENSA VER POWER SA VE SET UP 39[...]

1/2 SIGNAL SCREENSA VER PC OFF ST ANDBY SA VE OFF POWER MANAGEMENT OFF AUTO POWER OFF OFF OSD LANGUAGE ENGLISH ( US ) COMPONENT/RGB-IN SELECT RGB INPUT LABEL POWER SA VE SET UP 3D Y/C FIL TER (NTSC) COLOR SYSTEM SIGNAL ON AUTO 3 : 2 PULLDOWN Panasonic AUTO (4 : 3) OFF 4:3 [ VIDEO ] NOISE REDUCTION OFF REFRESH RA TE 100 Hz 3 : 2 PULLDOWN SIGNAL OFF [...]

3D Y/C FIL TER (NTSC) COLOR SYSTEM SIGNAL ON AUTO 3 : 2 PULLDOWN Panasonic AUTO (4 : 3) OFF 4:3 [ VIDEO ] 3 : 2 PULLDOWN OFF XGA MODE 1024 × 768 41 3:2 PULLDOWN COLOR SYSTEM / Panasonic AUT O Select SIGNAL from the “SET UP” menu during VIDEO (S VIDEO) input signal mode.(“SIGNAL [VIDEO]” menu is displayed.) SET UP for Input Signals Press to[...]

REFRESH RA TE 100 Hz q ADV ANCED NR [ VIDEO ] MOSQUITO NR VIDEO NR BLOCK NR OFF OFF OFF ADV ANCED NR [ Digital ] MOSQUITO NR VIDEO NR BLOCK NR OFF OFF OFF ADV ANCED NR [ COMPONENT ] MOSQUITO NR VIDEO NR BLOCK NR OFF OFF OFF ADV ANCED NR [ RGB ] MOSQUITO NR VIDEO NR BLOCK NR OFF OFF OFF () NOISE REDUCTION OFF () NOISE REDUCTION ADV ANCED 42 VIDEO NR[...]

SYNC SIGNAL [ RGB ] 3 : 2 PULLDOWN XGA MODE AUTO OFF 1024 × 768 SYNC AUTO SYNC ON G SYNC VBS H-FREQ. V -FREQ. kHz Hz 63.98 60.02 SIGNAL FORMA T 1280×1024/60 H-FREQ. V -FREQ. kHz Hz 63.98 60.02 DOT CLOCK FREQ. MHz 108.0 SIGNAL FORMA T 1280×1024/60 3 : 2 PULLDOWN SIGNAL OFF SDI THROUGH OFF [ Digital ] NOISE REDUCTION OFF REFRESH RA TE 100 Hz 43 SE[...]

Options Weekly Command Timer 1/3 Initial INPUT Onscreen display On O f f Off Off 0 0 Maximum VOL level Initial VOL level Off INPUT lock Off Button lock Off Remocon User level Options Enable Off-timer function Normal Initial Power Mode 0 ID select Off Remote ID Off Serial ID Off Display size Off Studio W/B Off Studio Gain 2/3 3/3 Options O f f Off O[...]

45 Item Adjustments INPUT lock Off PC INPUT1 INPUT2 INPUT3 Locks the input switch operation. Notes: • Only the adjusted signal is displayed (see page 15). • Signal can be displayed when the T erminal board is installed. • Input switch can be used when this is set to “Off”. • In two screen display mode, if anything other than “Of f” [...]

46 Item Adjustments Studio W/B Off: Nullify all the settings adjusted. On: Sets the color temperature for TV studio. Note: V alid only when the “W ARM” is set as “COLOR TEMP” in PICTURE menu. Studio Gain Sharpens the contrast for a better view when a part of the image is too light to see. Off: Disables “Studio Gain”. On: Enables “Stud[...]

Options On Weekly Command Timer Onscreen display 1/3 Weekly Command Timer Program1 Monday On Function Program3 Tuesday --- Wednesday Program3 Thursday --- Friday Program6 Saturday Program4 Sunday Program Edit y Program3 Thursday --- Friday Program6 Saturday Program4 Sunday Program Edit Weekly Command Timer 8:00 10:30 01 02 1/8 --:-- 03 --:-- 04 --:[...]

Weekly Command Timer 02 10:30 Command No Time IMS:SL1 Command 1 Program Weekly Command Timer Command 02 Command No IMS:SL1 10:30 Time 1 Program 1/2 SIGNAL PC OFF ST ANDBY SA VE OFF POWER MANAGEMENT OFF AUTO POWER OFF OFF OSD LANGUAGE ENGLISH ( US ) COMPONENT/RGB-IN SELECT RGB INPUT LABEL POWER SA VE SET UP SCREENSA VER SHIPPING YES 48 This function[...]

49 T roubleshooting Before you call for service, determine the symptoms and make a few simple checks as shown below . Symptoms Checks Picture Sound Interference Noisy Sound Electrical Appliances Cars / Motorcycles Fluorescent light Normal Picture No Sound V olume (Check whether the mute function has been activated on the remote control.) No Picture[...]

50 List of Aspect Modes Aspect mode Picture Enlarged screen Description All Aspect: On Factory setting All Aspect: Off 16:9 FULL The display of the pictures fi lls the screen. In the case of SD signals, pictures with a 4:3 aspect ratio are enlarged horizontally , and displayed. This mode is suited to displaying anamorphic pictures with a 16:9 aspe[...]

51 Applicable Input Signals Signal name Horizontal frequency (kHz) V ertical frequency (Hz) Component / RGB / Mini D-sub 15P (Dot clock (MHz)) DVI-D ∗ 8 (Dot clock (MHz)) 1 525 (480) / 60i 15.73 59.94 * (13.5) 2 525 (480) / 60p 31.47 59.94 * (27.0) ∗ 5 * (27.0) 3 625 (575) / 50i 15.63 50.00 * (13.5) 4 625 (575) / 50p 31.25 50.00 * (27.0) 5 625 [...]

52 Applicable Input Signals Signal format V ertical frequency (Hz) Horizontal frequency (kHz) Dot clock (MHz) Number of active pixels T otal number of pixels Number of active lines T otal number of lines 1 VGA60 59.94 31.47 25.18 640 800 480 525 2 525/60p 59.94 31.47 27.00 720 858 480 525 3 625/50p 50.00 31.25 27.00 720 864 576 625 4 750/60p 60.00 [...]

53 Command list of W eekly Command T imer No. Command Control details 1 AAC:MENCLR Audio Menu (Clear) 2 AAC:MENDYN Audio Menu (Dynamic) 3 AAC:MENSTD Audio Menu (Standard) 4 AAC:SURMON Surround (ON) 5 AAC:SUROFF Surround (OFF) 6 AMT :0 Audio Mute (OFF) 7 AMT :1 Audio Mute (ON) 8 ASO:M Audio out when PIP mode (Main Picture) 9 ASO:S Audio out when PIP[...]

54 TH-42PF1 1UK TH-50PF1 1UK Power Source 1 10 - 127 V AC, 50/60 Hz Power Consumption Power on 525 W 605 W Stand-by condition Save OFF 0.9 W , Save ON 0.5 W Save OFF 0.9 W , Save ON 0.5 W Power off condition 0.1 W 0.1 W Plasma Display panel Drive method : AC type 42-inch, 16:9 aspect ratio Drive method : AC type 50-inch, 16:9 aspect ratio Screen si[...]

55 TH-58PF1 1UK TH-65PF1 1UK Power Source 1 10 - 127 V AC, 50/60 Hz Power Consumption Power on 700 W 755 W Stand-by condition Save OFF 1.0 W , Save ON 0.5 W Save OFF 1.0 W , Save ON 0.5 W Power off condition 0.2 W 0.2 W Plasma Display panel Drive method : AC type 58-inch, 16:9 aspect ratio Drive method : AC type 65-inch, 16:9 aspect ratio Screen si[...]

Panasonic Professional Display Company Unit of Panasonic Corporation of North America One Panasonic W ay 1F-10 Secaucus, NJ 07094 Panasonic Professional Flat Panel Display Limited W arranty Models or Parts Part W arranty Labor W arranty Professional Flat Panel Display LIMITS AND EXCLUSIONS There are no express warranties except as listed above. THE[...]

Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario L4W 2T3 LIMITED W ARRANTY ST A TEMENT Item Video Tape P2/SD Cards Video Heads D5 Video heads Maintenance Items Colour Camera CCD Imaging Block BT-H Series LCD Monitors * DLP™ Projectors * LCD Projectors above 2,500 ANSI Lumens * LCD Projectors below 2,500 ANSI Lumens Projector Lamps 10[...]

58[...]

Panasonic Professional Display Company Unit of Panasonic Corporation of North America Executive Of fi ce : One Panasonic W ay 1F-10, Secaucus, NJ 07094 EASTERN ZONE : One Panasonic W ay 4E-7 Secaucus, NJ 07094 (201) 348-7621 Mid-Atlantic/New England : One Panasonic W ay 4E-7 Secaucus, NJ 07094 (201) 348-7621 Southeast Region : 1225 Northbrook Park[...]