Panasonic TH-85PF12U инструкция обслуживания

Before connecting, operating or adjusting this product, please read these instructions completely . Please keep this manual for future reference. English The illustration shown is an image. TQBC2502 Operating Instructions High De fi nition Plasma Display TH-85PF12U Model No.[...]

2 W ARNING: T o reduce the risk of electric shock, do not remove cover or back. No user-serviceable parts inside. Refer servicing to quali fi ed service personnel. The lightning flash with arrow-head within a triangle is in tend ed to tell the user that parts inside the product are a risk of electric shock to per sons. The exclamation point within[...]

3 Important Safety Instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water . 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer ’ s instructions. 8) Do not install near any heat so[...]

4 T able of Contents Dear Panasonic Customer W elcome to the Panasonic family of customers. W e hope that you will have many years of enjoyment fr om your new Plasma Display . T o obtain maximum benefit fr om your set, please r ead these Instructions befor e making any adjustments, and r etain them for futur e r efer ence. Retain your pur chase r e[...]

5 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed an[...]

6 Safety Precautions This Plasma Display is for use only with the following optional accessories. Use with any other type of optional accessories may cause instability which could result in the possibility of injury . (All of the following accessories are manufactured by Panasonic Corporation.) CAUTION When using the Plasma Display Do not bring you[...]

7 Safety Precautions W ARNING The front of the display panel has been specially treated. Wipe the panel surface gently using only a cleaning cloth or a soft, lint-free cloth. • If the surface is particularly dirty , wipe with a soft, lint-free cloth which has been soaked in pure water or water in which neutral detergent has been diluted 100 times[...]

+ + - - 8 Accessories Requires two AA batteries. 2. Insert batteries - note correct polarity ( + and -). Precaution on battery use Incorrect installation can cause battery leakage and corrosion that will damage the remote control transmitter . Disposal of batteries should be in an environment-friendly manner . Observe the following precautions: 1. [...]

AUDIO OUT R L 1 2 SERIAL PC IN AUDIO AUDIO OUT R L SLOT1 SLOT3 P R /C R /R P B /C B /B Y/G AUDIO R L COMPONENT/RGB IN SLOT2 9 Connections Note: T wo fi xing bands are supplied with this unit. In case of securing cables at three positions, please purchase it separately . – How to Unfasten the AC cord – Cable fi xing bands Secure any excess cab[...]

AUDIO PC IN 10 PC Input T erminals connection Notes: • With regard to the typical PC input signals that are described in the applicable input signals list (see page 62), adjustment values such as for the standard picture positions and sizes have already been stored in this unit. Y ou can add up to eight PC input signal types that are not included[...]

SERIAL 6 7 8 9 1 3 4 5 2 11 Connections SERIAL T erminals connection Notes: • Use the RS-232C straight cable to connect the computer to the Plasma Display . • The computer shown is for example purposes only . • Additional equipment and cables shown are not supplied with this set. The SERIAL terminal conforms to the RS-232C interface speci fi[...]

PC SLOT1 SLOT2 SLOT3 P R /C R /R P B /C B /B Y/G AUDIO RL COMPONENT/RGB IN HDMI A V OUT HDMI A V OUT SLOT3 P R /C R /R P B /C B /B Y/G AUDIO RL COMPONENT/RGB IN AUDIO OUT Y , P B , P R , OUT P R P B Y L R CO MP O NEN T VID E O O UT 12 Connections HDMI connection This unit has terminal boards equivalent to Dual HDMI T erminal Board (TY -FB10HMD) and[...]

13 Remote Control Sensor Power Indicator Right side surface Main Power On / Off Switch Power ON / OFF Connecting the plug to the W all Outlet. Press the Power switch on the Plasma Display to turn the set on: Power-On. Power Indicator: Green Press the button on the remote control to turn the Plasma Display off. Power Indicator: Red (standby) Press t[...]

PC FULL NANODRIFT English (UK) Deutsch Français Italiano Español ENGLISH (US) Русский OSD LANGUAGE SET SELECT PRESENT TIME SETUP PRESENT TIME OF DA Y MON 99:99 SET PRESENT TIME OF DA Y 99:99 DA Y MON PRESENT TIME SETUP PRESENT TIME OF DA Y MON 99:99 SET PRESENT TIME OF DA Y 10:00 DA Y TUE LANDSCAPE PORTRAIT DISPLA Y ORIENT A TION 14 From t[...]

INPUT MENU VOL ENTER / + / - / 15 Selecting the input signal Select the input signals to be connected by installing the optional T erminal Boards. Press to select the input signal to be played back from the equipment which has been connected to the Plasma Display . Input signals will change as follows: Notes: • Selecting is also possible by press[...]

INPUT MENU VO L ENTER/ + / - / 16 Basic Controls V olume Adjustment V olume Up “+” Down “–” When the menu screen is displayed: “+” : press to move the cursor up “–” : press to move the cursor down (see page 23) MENU Screen ON / OFF Each time the MENU button is pressed, the menu screen will switch. (see page 23) Normal Viewing PI[...]

17 Basic Controls Standby (ON / OFF) button The Plasma Display must fi rst be plugged into the wall outlet and turned on at the power switch (see page 13). Press ON to turn the Plasma Display On, from Standby mode. Press OFF to turn the Plasma Display Off to Standby mode. SET UP button (see page 23) SOUND button (see page 35) DIRECT INPUT buttons [...]

18 [from the unit] VOL ENTER/ + / - / Right side surface ASPECT Controls The Plasma Display will allow you to enjoy viewing the picture at its maximum size, including wide screen cinema format picture. Press repeatedly to move through the aspect options: For details about the aspect mode, please see “List of Aspect Modes” (page 61). Panasonic A[...]

19 ASPECT Controls Y ou can display two pictures, such as a video image and computer image, in a two-screen display . (Use the remote control for this operation. It cannot be performed with the buttons on the main unit.) MUL TI PIP SETUP Set the functions and mode for two-screen display in “MUL TI PIP SETUP” in the SET UP menu. (see page 47) Se[...]

20 MUL TI PIP MUL TI PIP Swapping Screens Each time this button is pressed, the main screen and sub screen are swapped. T wo screens (P AND P) Main screen Sub screen T wo screens (P OUT P) T wo screens (P IN P) During Blend PIP (Composite Screen Function) : A composite picture is displayed with the sub screen positioned over the main screen. For ex[...]

21 MUL TI PIP Selecting the T arget Screen for Operations Each time this button is pressed, the target screen for operations changes. PC INPUT1 PC INPUT1 Main screen Sub screen Main screen input mode Sub screen input mode Operations on the main screen Operations on the sub screen Notes: • When operations are performed for the sub screen, the sub [...]

2 EXIT 2 1 EXIT s 1 s 2 s 3 s 4 INPUT MENU VOL ENTER/ + / - / 22 VOL button MUTE button SURROUND button OFF TIMER button POSITION / ACTION button VOL button [Unit] Right side surface Digital Zoom This displays an enlargement of the designated part of the displayed image. Select the area of the image to be enlarged. Press on the enlargem[...]

23 On-Screen Menu Displays Remote Control Unit 1 Display the menu screen. Press to select. (Example: PICTURE menu) MENU Press several times. Each time the MENU button is pressed, the menu screen will switch. Normal Viewing PICTURE SOUND POS. /SIZE SET UP 2 Select the item. Select. VOL ENTER/ + / - / Press. Select. 25 0 0 0 5 PICTURE NORMAL NORMALIZ[...]

1/2 SIGNAL EXTENDED LIFE SETTINGS SET UP PC OFF ST ANDBY SA VE OFF POWER MANAGEMENT OFF AUTO POWER OFF OFF OSD LANGUAGE ENGLISH ( US ) COMPONENT/RGB-IN SELECT RGB INPUT LABEL SCREENSA VER POWER SA VE 2/2 SET UP MUL TI DISPLA Y SETUP SET UP TIMER PRESENT TIME SETUP DISPLA Y ORIENT ATION LANDSCAPE MUL TI PIP SETUP PORTRAIT SETUP 24 (see page 28, 29) [...]

0 NORMAL NORMALIZE AUTO SETUP POS. /SIZE V -POS 0 H-POS V -SIZE DOT CLOCK H-SIZE CLOCK PHASE 1:1 PIXEL MODE OFF 0 0 0 0 0 0 0 NORMAL NORMALIZE POS. /SIZE V -POS H-POS 0 V -SIZE H-SIZE 1:1 PIXEL MODE OFF AUTO SETUP 25 Adjusting POS. /SIZE 1 Press to display the POS. /SIZE menu. Press to select the menu to adjust. Press to adjust the menu. Press to e[...]

26 H-POS Adjust the horizontal position. V -POS Adjust the vertical position. H-SIZE Adjust the horizontal size. V -SIZE Adjust the vertical size. DOT CLOCK (During “COMPONENT”, “RGB” and “PC” input signal) Periodic striped pattern interference (noise) may occur when a striped pattern is displayed. If this happens, adjust so that any su[...]

27 While the POS. /SIZE display is active, if either the N button on the remote control is pressed at any time or the ACTION ( ) button is pressed during “NORMALIZE”, then all adjustment values are returned to the factory settings. Helpful Hint ( / NORMALIZE Normalization) Adjusting POS. /SIZE 1:1 PIXEL MODE Adjusts the display size when 1 125i[...]

BLACK EXTENSION AGC GAMMA INPUT LEVEL ADV ANCED SETTINGS NORMAL NORMALIZE W/B LOW B W/B HIGH R W/B LOW R W/B LOW G W/B HIGH G W/B HIGH B 0 0 2.2 0 0 0 0 0 0 OFF 25 0 0 0 5 PICTURE NORMAL NORMALIZE ST ANDARD BRIGHTNESS SHARPNESS PICTURE MENU COLOR PICTURE TINT COLOR MANAGEMENT ADV ANCED SETTINGS COLOR TEMP NORMAL OFF 28 PICTURE Adjustments 1 ADV ANC[...]

29 PICTURE Adjustments ADV ANCED SETTINGS Notes: • “COLOR” and “TINT” settings cannot be adjusted for “RGB/PC” input signal. • Y ou can change the level of each function (PICTURE, BRIGHTNESS, COLOR, TINT , SHARPNESS) for each PICTURE MENU. • The setting details for ST ANDARD, DYNAMIC and CINEMA respectively are memorized separatel[...]

18 0 0 0 3 PICTURE NORMAL NORMALIZE CINEMA BRIGHTNESS SHARPNESS PICTURE MENU COLOR PICTURE TINT COLOR MANAGEMENT ADV ANCED SETTINGS MEMORY SA VE COLOR TEMP NORMAL OFF MEMORY LOAD MEMORY EDIT 25 0 0 0 5 PICTURE NORMAL NORMALIZE CINEMA BRIGHTNESS SHARPNESS PICTURE MENU COLOR PICTURE TINT COLOR MANAGEMENT ADV ANCED SETTINGS COLOR TEMP NORMAL OFF 25 0 [...]

31 Picture Pro fi les Follow these steps to save picture adjustment values as pro fi les. Note: When the settings are locked in “EXTENDED LIFE SETTINGS”, pro fi les cannot be saved. Saving pro fi les 1 Specify the picture quality in the PICTURE menu and ADV ANCED SETTINGS. (see page 28, 29) 2 In the PICTURE menu, select “MEMORY SA VE”. [...]

32 Picture Pro fi les Load pro fi les and apply the picture adjustment values to the display as follows. Notes: • Loaded pro fi les are stored in memory according to the selected input interface (SLOT1, 2, 3 or PC IN). (see page 15) • When the settings are locked in “EXTENDED LIFE SETTINGS”, pro fi les cannot be loaded. 1 In the PICTURE[...]

33 Picture Pro fi les Y ou can lock saved pro fi les to restrict operations when the pro fi les are loaded. Y ou can also set passwords. Notes: • When the lock is set in “EXTENDED LIFE SETTINGS”, pro fi le cannot be locked. • If pro fi le is locked, the menu operations of “EXTENDED LIFE SETTINGS” are restricted. (see page 40) <L[...]

34 Picture Pro fi les Note: Make a note of the new password to remember it. 1 Follow steps 1–4 in the previous procedure, <Locking and unlocking pro fi les>. 2 Select “Change password”. Memory lock Off Change password MEMORY3 Off MEMORY4 Lock1 MEMORY1 Off MEMORY2 isf Mode Off 1 select 2 access <Changing passwords> 3 Enter a new [...]

0 0 0 1/2 SOUND NORMAL NORMALIZE OFF TREBLE BALANCE BASS 0 MID SURROUND MAIN AUDIO OUT (PIP) 35 SOUND Adjustment 1 Press to display the SOUND menu. Press to select the menu to adjust. Select the desired level by listening to the sound. Press to exit from adjust mode. 2 Select to adjust each item. While the “SOUND” menu is displayed, if either t[...]

99:99 MON PRESENT TIME SETUP PRESENT TIME OF DA Y MON 99:99 SET PRESENT TIME OF DA Y DA Y 0:00 0:00 SET UP TIMER POWER OFF FUNCTION POWER ON FUNCTION OFF OFF PRESENT TIME OF DA Y 99:99 POWER OFF TIME POWER ON TIME 2/2 SET UP MUL TI DISPLA Y SETUP MUL TI PIP SETUP PORTRAIT SETUP SET UP TIMER PRESENT TIME SETUP DISPLA Y ORIENT A TION LANDSCAPE 36 PRE[...]

1/2 SIGNAL EXTENDED LIFE SETTINGS SCREENSA VER PC OFF ST ANDBY SA VE OFF POWER MANAGEMENT OFF AUTO POWER OFF OFF OSD LANGUAGE ENGLISH ( US ) COMPONENT/RGB-IN SELECT RGB INPUT LABEL POWER SA VE SET UP SCREENSA VER ST ART FUNCTION SCROLLING BAR ONL Y PRESENT TIME OF DA Y 99:99 MODE OFF 37 Do not display a still picture, especially in 4:3 mode, for an[...]

SCREENSA VER ST ART FUNCTION MODE FINISH TIME ST ART TIME SCROLLING BAR ONL Y TIME OF DA Y 6:15 12:30 PRESENT TIME OF DA Y 15:00 SCREENSA VER ST ART FUNCTION MODE SA VER DURA TION SHOW DURA TION SCROLLING BAR ONL Y INTERV AL 12:00 3:00 PRESENT TIME OF DA Y 15:00 SCREENSA VER ST ART FUNCTION MODE SCREENSA VER DURA TION SCROLLING BAR ONL Y ST ANDBY A[...]

1/2 SIGNAL EXTENDED LIFE SETTINGS SCREENSA VER PC OFF ST ANDBY SA VE OFF POWER MANAGEMENT OFF AUTO POWER OFF OFF OSD LANGUAGE ENGLISH ( US ) COMPONENT/RGB-IN SELECT RGB INPUT LABEL POWER SA VE SET UP EXPRESS SETTINGS CUSTOM SETTINGS RESET EXTENDED LIFE SETTINGS PICTURE MENU PICTURE EXTENDED LIFE SETTINGS DYNAMIC SIDE BAR ADJUST NANODRIFT SA VER LOC[...]

40 Reduces screen image retention EXPRESS SETTINGS Set the “Image Retention Reduction” menu to the recommended settings. All menus will be locked. PICTURE MENU: ST ANDARD PICTURE: 10 SIDE BAR ADJUST : BRIGHT NANODRIFT SA VER: HIGH MID PEAK LIMIT : ON 1 Select “EXPRESS SETTINGS”. EXPRESS SETTINGS CUSTOM SETTINGS RESET EXTENDED LIFE SETTINGS [...]

41 Reduces screen image retention CUSTOM SETTINGS Set the individual “Image Retention Reduction” menu. 1 Select “CUSTOM SETTINGS”. EXPRESS SETTINGS CUSTOM SETTINGS RESET EXTENDED LIFE SETTINGS 1 select 2 access 2 T o set each menu to the recommended setting: Select “RECOMMENDED SETTINGS”. PICTURE MENU PICTURE EXTENDED LIFE SETTINGS DYNA[...]

1/2 PC OFF ST ANDBY SA VE OFF POWER MANAGEMENT OFF AUTO POWER OFF OFF OSD LANGUAGE ENGLISH ( US ) COMPONENT/RGB-IN SELECT RGB INPUT LABEL SIGNAL SCREENSA VER EXTENDED LIFE SETTINGS POWER SA VE SET UP 42 Reduces power consumption Press to select “POWER SA VE” “ST ANDBY SA VE” “POWER MANAGEMENT” “AUTO POWER OFF”. Press to select “ON[...]

1/2 PC OFF ST ANDBY SA VE OFF POWER MANAGEMENT OFF AUTO POWER OFF OFF OSD LANGUAGE ENGLISH ( US ) COMPONENT/RGB-IN SELECT RGB INPUT LABEL SIGNAL SCREENSA VER EXTENDED LIFE SETTINGS POWER SA VE SET UP 1/2 SIGNAL PC OFF ST ANDBY SA VE OFF POWER MANAGEMENT OFF AUTO POWER OFF OFF OSD LANGUAGE ENGLISH ( US ) COMPONENT/RGB-IN SELECT RGB INPUT LABEL POWER[...]

44 Sets the fan control and the display style of on-screen menu for vertical installation. Press to display the SET UP menu. Press to select DISPLA Y ORIENT A TION. Press to select “LANDSCAPE” or “PORTRAIT”. Press to exit from adjust mode 1 2 3 Notes: • If the display is installed vertically , the power switch should be located at the bot[...]

2/2 SET UP MUL TI DISPLA Y SETUP SET UP TIMER PRESENT TIME SETUP DISPLA Y ORIENT A TION LANDSCAPE MUL TI PIP SETUP PORTRAIT SETUP × 2 MUL TI DISPLA Y SETUP HORIZONT AL SCALE OFF A1 OFF AI-SYNCHRONIZA TION VERTICAL SCALE LOCA TION OFF SEAM HIDES VIDEO × 2 MUL TI DISPLA Y SETUP 45 By lining up Plasma Displays in groups, for example, as illustrated [...]

46 Y ou can set the remote control ID when you want to use this remote control on one of several different displays. SET UP for MUL TI DISPLA Y 1 2 3 Switch to on the right side. Press the button on the remote control. Press one of - , for the tens digit setting. Press one of - , for the units digit setting. 4 Notes: • The numbers in 2, 3 and 4 s[...]

— MUL TI PIP DISPLA Y MODE BLEND PIP OFF 1 INSERT LEVEL TRANSP ARENCY INSERT 0 % TRANSP ARENCY LEVEL OFF MUL TI PIP SETUP 2/2 SET UP MUL TI DISPLA Y SETUP SET UP TIMER MUL TI PIP SETUP PORTRAIT SETUP 47 MUL TI PIP SETUP Set the two-screen display function that is activated when is pressed. Press to select the MUL TI PIP SETUP . Press to display t[...]

48 Divide an input image into 3 parts, and display one of them to a plasma display which is set vertically . The image will be enlarged 3 times and rotated 90-degree. SET UP for PORTRAIT (Example) Press to display the SET UP menu. Press to select the PORTRAIT SETUP . Press to display the “PORTRAIT SETUP” menu. Press to select the PORTRAIT SETUP[...]

49 SET UP for PORTRAIT Press to select VIEWING AREA or LOCA TION. Press to select each function. Notes: • For HD signal videos, the “VIEWING AREA” is set at “16:9”, and cannot be changed. HD signal: 1 125 (1080) / 60i • 50i • 60p • 50p • 24p • 25p • 30p • 24sF , 750 (720) / 60p • 50p, 1250 (1080) / 50i • When “VIEWING [...]

1/2 PC OFF ST ANDBY SA VE OFF POWER MANAGEMENT OFF AUTO POWER OFF OFF OSD LANGUAGE ENGLISH ( US ) COMPONENT/RGB-IN SELECT RGB INPUT LABEL SIGNAL SCREENSA VER EXTENDED LIFE SETTINGS POWER SA VE SET UP 1/2 PC OFF ST ANDBY SA VE OFF POWER MANAGEMENT OFF AUTO POWER OFF OFF OSD LANGUAGE ENGLISH ( US ) YUV/RGB-IN SELECT RGB INPUT LABEL SIGNAL SCREENSA VE[...]

1/2 SIGNAL SCREENSA VER EXTENDED LIFE SETTINGS PC OFF ST ANDBY SA VE OFF POWER MANAGEMENT OFF AUTO POWER OFF OFF OSD LANGUAGE ENGLISH ( US ) COMPONENT/RGB-IN SELECT RGB INPUT LABEL POWER SA VE SET UP 3D Y/C FIL TER (NTSC) COLOR SYSTEM SIGNAL ON AUTO 3 : 2 PULLDOWN Panasonic AUTO (4 : 3) OFF 4:3 [ VIDEO ] NOISE REDUCTION OFF REFRESH RA TE 100 Hz 3 :[...]

3D Y/C FIL TER (NTSC) COLOR SYSTEM SIGNAL ON AUTO 3 : 2 PULLDOWN Panasonic AUTO (4 : 3) OFF 4:3 [ VIDEO ] 3 : 2 PULLDOWN OFF XGA MODE AUTO 52 3:2 PULLDOWN COLOR SYSTEM / Panasonic AUT O Select SIGNAL from the “SET UP” menu during VIDEO (S VIDEO) input signal mode. (“SIGNAL [VIDEO]” menu is displayed.) SET UP for Input Signals Press to selec[...]

REFRESH RA TE 100 Hz q ADV ANCED NR [ VIDEO ] MOSQUITO NR VIDEO NR BLOCK NR OFF OFF OFF ADV ANCED NR [ Digital ] MOSQUITO NR VIDEO NR BLOCK NR OFF OFF OFF ADV ANCED NR [ COMPONENT ] MOSQUITO NR VIDEO NR BLOCK NR OFF OFF OFF ADV ANCED NR [ RGB ] MOSQUITO NR VIDEO NR BLOCK NR OFF OFF OFF () NOISE REDUCTION OFF () NOISE REDUCTION ADV ANCED 53 VIDEO NR[...]

SYNC SIGNAL [ RGB ] 3 : 2 PULLDOWN XGA MODE AUTO OFF AUTO SYNC AUT O SYNC ON G SYNC VBS H-FREQ. V- F RE Q . kHz Hz 63.98 60.02 SIGNAL FORMA T 1280×1024/60 H-FREQ. V- F RE Q . kHz Hz 63.98 60.02 DOT CLOCK FREQ. MHz 108.0 SIGNAL FORMA T 1280×1024/60 3 : 2 PULLDOWN SIGNAL OFF SDI THROUGH OFF [ Digital ] NOISE REDUCTION OFF REFRESH RA TE 100 Hz 54 SE[...]

Options Weekly Command T imer 1/3 Initial INPUT Onscreen display On Off Off Off 0 0 Maximum VOL level Initial VOL level Off INPUT lock Off Button lock Off Remocon User level Memory lock Options Enable Off-timer function Normal Initial Power Mode 0 ID select Off Remote ID Off Serial ID Off Display size Off Studio W/B Off Studio Gain 2/3 3/3 Options [...]

56 Item Adjustments INPUT lock Off PC INPUT1 INPUT2 INPUT3 Locks the input switch operation. Notes: • Only the adjusted signal is displayed (see page 15). • Signal can be displayed when the T erminal board is installed. • Input switch can be used when this is set to “Off”. • In two screen display mode, if anything other than “Of f” [...]

57 Item Adjustments Studio W/B Off: Nullify all the settings adjusted. On: Sets the color temperature for TV studio. Note: V alid only when the “W ARM” is set as “COLOR TEMP” in PICTURE menu. Studio Gain Sharpens the contrast for a better view when a part of the image is too light to see. Off: Disables “Studio Gain”. On: Enables “Stud[...]

Options On Weekly Command Timer Onscreen display 1/3 Weekly Command Timer Program1 Monday On Function Program3 Tuesday --- Wednesday Program3 Thursday --- Friday Program6 Saturday Program4 Sunday Program Edit y Program3 Thursday --- Friday Program6 Saturday Program4 Sunday Program Edit Weekly Command Timer 8:00 10:30 01 02 1/8 --:-- 03 --:-- 04 --:[...]

Weekly Command Timer 02 10:30 Command No Time IMS:SL1 Command 1 Program Weekly Command Timer Command 02 Command No IMS:SL1 10:30 Time 1 Program 1/2 SIGNAL PC OFF ST ANDBY SA VE OFF POWER MANAGEMENT OFF AUTO POWER OFF OFF OSD LANGUAGE ENGLISH ( US ) COMPONENT/RGB-IN SELECT RGB INPUT LABEL POWER SA VE SET UP SCREENSA VER EXTENDED LIFE SETTINGS 59 Thi[...]

60 T roubleshooting Before you call for service, determine the symptoms and make a few simple checks as shown below . Symptoms Checks Picture Sound Interference Noisy Sound Electrical Appliances Cars / Motorcycles Fluorescent light Normal Picture No Sound V olume (Check whether the mute function has been activated on the remote control.) No Picture[...]

61 List of Aspect Modes Aspect mode Picture Enlarged screen Description All Aspect: On Factory setting All Aspect: Off 16:9 FULL The display of the pictures fi lls the screen. In the case of SD signals, pictures with a 4:3 aspect ratio are enlarged horizontally , and displayed. This mode is suited to displaying anamorphic pictures with a 16:9 aspe[...]

62 Applicable Input Signals *Mark: Applicable input signal Signal name Horizontal frequency (kHz) V ertical frequency (Hz) COMPONENT / RGB IN / PC IN (Dot clock (MHz)) DVI-D IN ∗ 8 (Dot clock (MHz)) 1 525 (480) / 60i 15.73 59.94 * (13.5) 2 525 (480) / 60p 31.47 59.94 * (27.0) ∗ 5 * (27.0) 3 625 (575) / 50i 15.63 50.00 * (13.5) 4 625 (575) / 50p[...]

63 Applicable Input Signals Signal format V ertical frequency (Hz) Horizontal frequency (kHz) Dot clock (MHz) Number of active pixels T otal number of pixels Number of active lines T otal number of lines 1 VGA60 59.94 31.47 25.18 640 800 480 525 2 525/60p 59.94 31.47 27.00 720 858 480 525 3 625/50p 50.00 31.25 27.00 720 864 576 625 4 750/60p 60.00 [...]

64 Command list of W eekly Command T imer No. Command Control details 1 AAC:MENCLR ∗ 1 Audio Menu (Clear) 2 AAC:MENDYN ∗ 1 Audio Menu (Dynamic) 3 AAC:MENSTD ∗ 1 Audio Menu (Standard) 4 AAC:SURMON Surround (ON) 5 AAC:SUROFF Surround (OFF) 6 AMT :0 Audio Mute (OFF) 7 AMT :1 Audio Mute (ON) 8 ASO:M Audio out when PIP mode (Main Picture) 9 ASO:S [...]

65 Speci fi cations TH-85PF12U Power Source 120 V AC, 50/60 Hz Power Consumption Power on 1250 W Stand-by condition Save OFF 1.0 W , Save ON 0.5 W Power off condition 0.2 W Plasma Display panel Drive method : AC type 85-inch, 16:9 aspect ratio Screen size 74.3” (1,889 mm) (W) × 41.8” (1,062 mm) (H) × 85.3” (2,167 mm) (diagonal) (No.of pixe[...]

Panasonic Professional Display Company Unit of Panasonic Corporation of North America One Panasonic W ay 1F-10 Secaucus, NJ 07094 Panasonic Professional Flat Panel Display Limited W arranty Models or Parts Part W arranty Labor W arranty Professional Flat Panel Display LIMITS AND EXCLUSIONS There are no express warranties except as listed above. THE[...]

Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario L4W 2T3 LIMITED W ARRANTY ST A TEMENT Item Video Tape P2/SD Cards Video Heads D5 Video heads Maintenance Items Colour Camera CCD Imaging Block BT-H Series LCD Monitors * DLP™ Projectors * LCD Projectors above 2,500 ANSI Lumens * LCD Projectors below 2,500 ANSI Lumens Projector Lamps 10[...]

68[...]

69 Memo[...]

70 Memo[...]

71 Memo[...]

M0809S0 Panasonic Professional Display Company Unit of Panasonic Corporation of North America Executive Of fi ce : One Panasonic W ay 1F-10, Secaucus, NJ 07094 Panasonic Canada Inc. 5770 Ambler Drive Mississauga, Ontario L4W 2T3 Customer ’ s Record The model number and serial number of this product can be found on its back cover . Y ou should no[...]