Panasonic TY-FB10WPU инструкция обслуживания

reless Car d TQZH824-2 Operating Instructions Wireless Presentation Board Model No. TY -FB10WPU Before connecting, operating or adjusting this product, please read these instructions completely . Please keep this manual for future reference. English[...]

2 Contents FCC ST A TEMENT ....................................................... 3 Safety Precautions (Be sure to observe) ................ 3 Handling Cautions ..................................................... 3 Before using wireless card ....................................... 3 Accessories ...................................................[...]

3 FCC ST A TEMENT FCC ST A TEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, a[...]

ON OFF INPUT ASPECT INDEX ID SET VOL ENTER RETURN MENU ID ALL 4 Accessories • Screw × 4 (Slot cover cramping screw) • Screw × 2 ( Screws for cramping wireless card protection cover) • CD-ROM disc (Wireless Manager ME. etc) [TVD01013] • Wireless card protection cover • Wireless card [N5HZZ0000042] • Remote control [N2QAFB000004] • T [...]

5 Use of this Software is governed by the terms defined in this Software Licensing Agreement. Article 1 License Licensee is granted the right to use this software, including the information recorded or described on the CD-ROM and in the instruction manual and any other media provided to the Licensee (collectively “Software”), but all applicable[...]

6 Wireless equipment that has obtained a certificate of conformity is supplied with this unit. Wireless connection function of the unit uses radio waves in the 2.4 GHz band. A radio station license is not required, but be sure to read and fully understand the following items before use. Do not use near other wireless equipment. The following equipm[...]

7 Notes on Using Wireless Connection (cont.) Channels that can be used The channels (frequency range) that can be used differ according to the country or region. Refer to the table below . Country or region Standard Channels used Frequency band (Center frequency) Japan ARIB STD-T66 1 - 13 2,412 MHz - 2,472 MHz England, Germany , France, Spain, Ital[...]

8 ON OFF INPUT ASPECT INDEX ID SET VOL ENTER RETURN MENU ID ALL POWER ON button Input selector button Select the setting suitable for the connected device. Function in the same way as the INPUT button on the remote control for the display . (Refer to the instructions for the display .) Screen mode button Function in the same way as the ASPECT butto[...]

SLOT 2 SLOT3 S L O T 1 S L O T 2 S L O T 3 1 2 3 4 S L O T 1 S L O T2 S L O T 3 P C IN S E R T 1 S L O T 2 S L O T 3 9 Installing and removing the wireless card/Installing and removing the unit to the display 3 Install the unit into the slot of the display . See Slot Nos. of the display unit that are compatible with terminal board attachments. (Pag[...]

10 Check your computer • First, check your computer to see whether or not it has a built-in wireless LAN* function. *LAN : “Glossary” (See page 54) • Before connecting the unit to the computer, be sure to check the following settings. • Operation is not guaranteed for all wireless cards and built-in wireless LAN adapters. Check 1 Wireless[...]

11 Software Installation The computer must meet the following requirements in order to use the supplied software. OS: Microsoft Windows 2000 Professional/XP Home Edition/XP Professional CPU: Intel ® Pentium ® III 600 MHz or faster , or compatible processor (800 MHz or faster is recommended when using live mode) RAM: 256 MB or more Empty hard disk[...]

12 When inserting the provided CD-ROM into the computer , the installer starts up automatically and the following screen appears. • Shut down all software currently active on Windows. Otherwise, installation may not be possible. • Administrator authority is required for installation. • If the installer does not start up automatically , double[...]

13 Installation free set up Y ou can use Wireless Manager ME 4.0 without installing it in the computer . If you copy Wireless Manager ME 4.0 to a removable medium, such as an SD card, you can use Wireless Manager ME 4.0 without installing it in any computer that permits you to access this removal medium. Insert provided CD-ROM into the CD-ROM drive[...]

14 Making Connections 1 Click [ ] on the desktop, or select [Start] → [All Programs] → [Panasonic Wireless Display] → [Wireless Manager mobile edition 4.0]. • Enter the user name in up to 8 alphanumerics. • The icon and user name are set when Wireless Manager ME 4.0 is first launched. • The icon and user name settings can be changed in [...]

15 2 Click [Detailed]. The units that can be connected are displayed on the “Select Access Port” window. ヂ Network When you specify the network number (See page 44) set on the unit from one of [1], [2], [3], [4], and [U (USER)] ※ 1 , units that are presently switched on in the selected network number are displayed in [Projector Name]. The i[...]

16 3 In [Network], select the network number set for the unit. • Units powered on in the chosen network group are listed. • This value is set to [1] by default. • For details on setting a network number for the unit, see page 44. 4 Select the desired units, and click [OK]. The launcher appears and the connection with the unit is established. [...]

17 Making Connections (cont.) When wireless LAN connection cannot be established, [ ] blinks in the bottom left of the “Select Access Port” window. Click the [ ] button at this time to display information on resolving the issue as shown below . The displayed information is as follows. Detected issue Displayed information Remarks Reference page [...]

18 Detected issue Displayed information Remarks Reference page When a change in the settings made by the utility has been detected The settings of Wireless Network connection have been changed. When a Wireless LAN Card utility or any other utilities are active, stop the operation of such utilities, then restart the application. The wireless LAN uti[...]

19 Click [ ] on the launcher . The following window appears. 1 Click [Y es]. The computer returns to the original network settings when the connection is ended. However , note that some time may be needed to return to the original network settings. Click [No] to return to the launcher . 2 Other operations for connection When the launcher is minimiz[...]

20 Other operations for connection (cont.) * “Glossary” (See page 54) The newly registered connection is added to the connection list in the window shown in step 1. Click [ADD] and enter the IP address* (including its periods) of the connection to be added, and then click [REGISTER]. 2 Click [Designate] at the “Select Access Port” window. T[...]

21 Other operations for connection (cont.) Even if there are two or more units with the same name, an ID ([Disp] + 4-digit number) is assigned to each unit to enable the units to be identified. When you click [ID Search], a search for the unit of the specified ID is carried out from among the units that are presently switched on, from all channels [...]

22 The launcher always appears on the computer screen, and can be used to perform various operations. • By default, the “simple launcher” is displayed. Select the launcher using the Simple Launcher <> Full Launcher select button. The display mode that the system was in when Wireless Manager ME 4.0 was exited is activated the next time t[...]

23 V arious display methods (cont.) Full launcher ツ Live Mode: Displays the computer screen over the entire display screen. (See page 24) ヅ Select Access Port: Displays the “Select Access Port” window . (See page 15) テ Virtual remote control : Does not function on this unit. デ Multi Live Mode: Display the screens of multiple computers o[...]

24 V arious display methods (cont.) Press the [INDEX] button on the remote control to turn the display screen into a full screen display (the status when no index window is displayed). If you press the [INDEX] button once or twice when index windows are displayed on the display screen, the screen will switch over to a full screen display . 1 Check [...]

25 V arious display methods (cont.) Multi live mode has “4-screen multi style”, “4-screen index style” and “16-screen index style”. Styles are switched by the remote control. How to operate Press the [INDEX] button of the remote control to change the style. Multi live mode • 4-screen index style Display the indexes (small screens) of [...]

26 V arious display methods (cont.) Check the status indication on the launcher to make sure that transmission is possible (check that the green lamp is lit). 2 Press the [INDEX] button on the remote control to turn the display screen into a full screen display (the status when no index window is displayed). (See page 25) If you press the [INDEX] b[...]

27 V arious display methods (cont.) When the display is set to “4-screen index style”, connect up to four computers to one unit, and then simultaneously display the screens for the four computers on the index windows and also on a large screen. Check the status indication on the launcher to make sure that transmission is possible (check that th[...]

28 Quitting 4-screen index style Select and click the checked position in step 4 on the previous page. V arious display methods (cont.) Enlarged display • Use the [ ] buttons on the remote control to move the focus (yellow box) to the image to be enlarged, and press the [ENTER] button. The image is enlarged and displayed at the top of the display[...]

29 V arious display methods (cont.) Check the status indication on the launcher to make sure that transmission is possible (check that the green lamp is lit). 2 Press the [INDEX] button of the remote control to switch the display screen to “16- screen index style”. (See page 25) 1 Click [ ] on the launcher . The computer images are automaticall[...]

30 Y ou can simultaneously display one computer’s screen on up to eight units. Click [ ] of the launcher . The “Select Access Port” window appears. 2 Press the [INDEX] button on the remote control to turn the display screen into a full screen display (the status when no index window is displayed). If you press the [INDEX] button once or twice[...]

31 Click [ ] on the launcher . The displays selected in step 5 will begin displaying. 7 Check the status indication on the launcher to make sure that transmission is possible (check that the green lamp is lit). 6 • Units in the same network are selectable. • When one of the selected units is communicating with another computer, or its display s[...]

32 V arious display methods (cont.) Multiple Source Multi Live Mode Connect up to four computers to each of up to eight units, and display in each unit by the 4-screen multi style. Click [ ] of the launcher . The “Select Access Port” window appears. 2 Press the [INDEX] button on the remote control to turn the display screen into a full screen d[...]

33 Switching to a different position Select and click a different display position in step 8 above. Enlarged display If [ ] is clicked with a computer , display screens temporarily change to full screen display . T o return to the original display , click [ ] with the computer that click [ ] and select original display positions with each computer.[...]

34 Useful Functions By using the selective area window , you can specify the necessary information alone from the computer screen, and display it on the display screen. Check the status indication on the launcher to make sure that transmission is possible (check that the green lamp is lit). 3 Click [ ] on the launcher . Selective area window (green[...]

35 Useful Functions (cont.) Y ou can set the computer screen and the display screen to the multi-monitor mode, and use the computer screen as the primary monitor and the display screen as the secondary monitor . Click [ ] on the launcher . 1 Click [ ], [ ] or [ ] on the launcher . The secondary screen on the computer is displayed. 3 Check the statu[...]

36 Useful Functions (cont.) A snapshot of the current computer screen is transmitted to the display Click [ ] on the launcher . 4 Check the status indication on the launcher to make sure that transmission is possible (check that the green lamp is lit). 3 One shot function Cancel all live mode transmission. 1 Press the [INDEX] button on the remote c[...]

37 Functions used with each display method Useful Functions (cont.) Selective area transmission Secondary display transmission Shutter Pointer Note When connected to one unit Live mode Multi live mode ×× One shot ×× × ※ When connected to multiple units Multiple Source Live Mode Multiple Source Multi Live Mode ×× One shot ×× × ※ = Y es[...]

38 V arious picture quality and live mode settings are available when using Wireless Manager ME 4.0. Setting options Click [ ] on the launcher . The “Option” window shown to the right appears. 1 Click the desired tab to be set. 2 Click [OK]. 3 Picture quality selection Select the quality of the image transmitted from the computer to the unit. L[...]

39 Y ou can set shortcut key combinations that let you control the Wireless Manager ME 4.0 functions by computer keyboard operations. Key setting Select the mode or the function to be set for the shortcut key , and click it. 1 Select one from [Ctrl], [Alt], and [Shift]. 2 Select one alphabet to be used with the key chosen in step 2. 3 Click [Settin[...]

40 Setting options (cont.) • If the [Make an automatic connection] box is checked and a unit is registered as a destination for automatic connection when Wireless Manager ME 4.0 is started, “Select Access Port” window does not appear and connection is performed automatically . • When [Setting] is clicked, “Access Log” window appears and[...]

41 Using W ebBrowser Computer settings Open “Internet Properties” window . Click [Start] → [Control Panel] → [Network and Internet Connections] → [Internet Option]. 1 Open [Connections] → [LAN Settings]. 2 If [Use a proxy server for your LAN] has been checked, remove the check. If [Use automatic configuration script] has been checked, r[...]

42 • No password is set when shipped from the factory . • Password used in this page is for accessing the web control window. (See page 48) • If you forget the password, initialize the unit using the remote control. (See page 53) • The top window may not appear depending on the WebBrowser . In this case start up WebBrowser again, or press t[...]

43 Using WebBrowser (cont.) Displays current display status T o access this page from another page, click “Display Control” on the menu and “STA TUS” on the submenu. Monitor information window Monitor information is refreshed every 30 seconds. Current correct information can be checked by clicking [View] → [Refresh]. Y ou can make various[...]

44 Using WebBrowser (cont.) Y ou can make the network settings on the unit when connecting without computer administrator rights, when connecting through an access point (infrastructure mode), or when making security settings. (See page 51, Other Connection Methods) Network Settings Screen Network Number Setting Screen This screen is used to select[...]

45 Using WebBrowser (cont.) NETWORK: Sets a name for the network number . IP: DHCP* ON : If a DHCP server exists in the network to which the unit is connected, the IP address will automatically be acquired. DHCP OFF: If a DHCP server does not exist in the network to which the unit is connected, additionally set [IP ADDRESS*], [SUBNETMASK*] and [GA [...]

46 Using WebBrowser (cont.) Detailed Network Settings Screen (3/3) 6 AUTHENTICA TION:OPEN or SHARED AUTHENTICA TION:WP A-PSK ENCRYPTION: Used to select and set the encryption system. NONE: When no encryption is used. This can be selected when [AUTHENTICA TION] is [OPEN] or [SHARED]. WEP*: When WEP is used for the encryption system. KEY1 to KEY4: Se[...]

47 Using WebBrowser (cont.) Network Configuration Confirmation Screen 7 Displays a configuration confirmation screen. If correct, click [SUBMIT]. T o change settings, click [BACK] to return to the original screen. Important data is protected even if [ENCRYPTION] is set to [NONE] for video and audio data because AES encryption is carried out for all[...]

48 Using WebBrowser (cont.) Sets a password for each feature. • Click [Network Settings] on the menu. Change Password Screen ヂ  WEB password setting Sets the password to use when accessing the WEB browser control screen. Click [WEB] on the submenu. Enter the old password and the new password, and then click OK. • No password is set when sh[...]

49 Using WebBrowser (cont.) ッ  WM Authentication Settings Sets the password to use when starting Wireless Manager ME4.0. Click [WM] on the submenu. Password: Enable: Set when enabling authentication. Next, enter the password. • The password may contain one-byte alphabetic characters (upper and lower case) and numeric characters. • Enter up[...]

50 Using WebBrowser (cont.) When using more than one unit, you can set an ID to restrict the use of the remote control. Access is not allowed unless the remote control ID matches that set for the unit. This ID can be set using the remote control as follows. Click [Remote control ID Settings] on the menu. Remote control ID Settings Screen After ente[...]

51 Other Connection Methods Y ou can make the setting for infrastructure mode* (connection through the access point); however , confirm to your system administrator on network settings before changing any settings. (See page 44) * “Glossary” (See page 55) First connect the unit to the computer . (See page 14) 1 Connecting through the access poi[...]

52 Other Connection Methods (cont.) Exit Wireless Manager ME 4.0 running on the computer . 3 Make settings on the computer . a) Click [Start] → [Control Panel] → [Network and Internet Connections] → [Network Connections], right click [Wireless Network Connections], and click [Properties], then [Wireless Network Connection Properties] window a[...]

53 Returning to the Initial Settings Push ID SET key of remote control once . 1 Then Push key three times. “RESET!” is displayed at the upper left of the screen. 2 Y ou can return the changed settings to the initial conditions. (Exit the Wireless Manager before proceeding.) RESET! ON OFF INPUT ASPECT VOL ENTER RETURN MENU ID ALL INDEX ID SET[...]

54 Glossary Category Item Descriptions Page Common Setting of connections LAN Abbreviation for Local Area Network. This is a network with a relatively narrow range such as inside a company . 10 Access point These are stations for relaying electromagnetic signals between computers in a wireless LAN. When a computer is connected to an access point, i[...]

55 Category Item Descriptions Page Advanced setting of connection AD_HOC This is the mode in which computers communicate with each other directly , rather than via access points. 45/ 51 INFRASTRUCTURE (infrastructure mode) This is the mode in which communications are performed via the access point. 45/ 51 SSID Abbreviation for Service Set ID. The S[...]

56 Frequently Asked Questions Check the following points once more before requesting repair . No wireless connection can be made between my unit and my computer . • Is Wireless Manager ME 4.0 running? Wireless Manager ME 4.0 must be started in the computer in order to enable wireless transmissions of images to the unit. <When a setting error f[...]

57 Frequently Asked Questions (cont.) No wireless connection can be made between my unit and my computer . (cont.) <When Windows Firewall has been detected> ヂ Has your firewall in Windows XP been disabled? The firewall in Windows XP must be disabled in order to connect to a wireless network. How to disable the firewall in Windows XP 1. Clic[...]

58 Frequently Asked Questions (cont.) Wireless connection is lost shortly . • If live transmission is cancelled or if the connection is lost, re-establish the connection from the launcher . The connection has been lost in the multi live mode. • If a computer with a certain version of the Intel Centrino mobile technology (wireless LAN) is connec[...]

59 Frequently Asked Questions (cont.) There is a time lag between operations at the computer and results in the displayed image. • Wireless Manager ME 4.0 reads the screen, compresses the data and transmits it to the unit. In the unit, the received data are extracted and then displayed. Some delays occur in this system, due to the processing time[...]

Notes: • Unauthorized use or reproduction of part or all of this product software and manuals is strictly prohibited. • Panasonic cannot be held liable for any effects resulting from the use of this product software and manuals. • Panasonic reserves the right to revise this product software specifications and manual contents without notice. T[...]