Panduit PN380C инструкция обслуживания

DPoE ™ Power System User Manual Copyright © 2007 PANDUIT Corp. All rights reserved. No part of this book shall be repr oduced, stored in a retrieval system, or transmitted by any means, electronic, mechanical, photocopying, recording or otherwise, without written permission from PANDUIT . No patent liabilit y is assumed with respect to the use o[...]

DP O E™ Power System User Manual Part Number: PN380C ii SAFETY WARNING The DP O E™ Power Patch Panel Power System is for use in re stricted access locations o nly. It is suitable for mounting on concrete or other non-combustible surfaces. Always observe standard safety precautions durin g installation, operation and maintenance of this product.[...]

DP O E™ Power System User Manual Part Number: PN380C iii The remedies provided herein are Buye r's sole and exclu sive remedies. PANDUIT Corp. shall not be liable for any direct, indirect, special, inci dental or consequential da mages, whether base d on contract, tort or other legal theory. Unless otherwise specified by PANDUIT Corp., open [...]

DP O E™ Power System User Manual Part Number: PN380C iv TABLE OF CONTENTS SAFETY WARNING ..................................................................................................................... ii  FCC Compliance Statement ..................................................................................................... ii  [...]

DP O E™ Power System User Manual Part Number: PN380C v Table 4: Recommended AC Circuit Breaker and Wire Sizes ........................................................ 4  Table 5: Minimum Recommended DC AWG for 90°C Cabling for Unprotected Outputs ............. 6  Table 6: Recommended Torque Settings ........................................[...]

DP O E™ Power System User Manual Part Number: PN380C OVERVIEW The DP O E™ Power Patch Panels a nd the DP O E™ Compact 8 Mids pan provide a reliable and cost- effective solution for Power over Ethernet (PoE) applications, complaint with the IEEE 802.3af-2003 specifications or the alternate PoE (Cisco Legacy) specifications. These DP O E™ Pow[...]

DP O E™ Power System User Manual Part Number: PN380C 2 INSTALLATION CAUTION: Observe all local and national electrical, environmenta l, and workplace codes. Each chassis should be fe d from a dedicated AC branch circuit of a TN or IT po wer system. CAUTION: The plug ends on the power cord s used for the AC connection s are considered to be the pr[...]

DP O E™ Power System User Manual Part Number: PN380C 3 Table 2: DP O E™ Power Components Available from PANDUI T PANDUIT Part Number Description DPOEPWRB120Y Individual power supply - 120 watt power supply – 48 volt output DPOEPWRCU Unmanaged power chassi s (supports 3 r ectifiers) DPOEPWRR500 500 watt rectifier for use in power chassis DPOEP[...]

DP O E™ Power System User Manual Part Number: PN380C Rec t i f i e r s 12 3 Feed 1 Feed 2 AC In N+1 DC Out Feed 3 Figure 2: Individual AC F eed Wiring Architecture Each individual AC feed should be prote cted using a circuit breaker as list ed in Table 4: Recommended AC Circuit Breaker and Wire Sizes . Table 4: Recommended AC Circuit Breaker and [...]

DP O E™ Power System User Manual Part Number: PN380C CAUTION: ALWAYS FOLLOW NEC GUIDELINES AND YOUR LOCAL COMPANY PRACTICES WHEN SELECTING DC WIRING AND PROTECTION. Table 5: Minimum Recommended DC AWG for 90°C Cabling for Unprotecte d Outputs shows recommended wire sizes base d on ampacity. The maximum curren t rating for the chassis is 100 A . [...]

DP O E™ Power System User Manual Part Number: PN380C Butt spl i ces con nect or s P o w e r c o n n ec to r housi ng wit h w i r e l eads 48VD C Suppl y Pow er Connect o r on r ear s i de of DP O E™ Power Pat ch Pan el or Com pact 8 Mid span Con ne c t or pi nout s Figure 4: Connecting to a DPoE ™ Power Patch Panel or Compact 8 Midspan NOTE: [...]

DP O E™ Power System User Manual Part Number: PN380C 7 Torque Settings The following table shows recomme nded torque settings for all me chanical and electrical con nections according to screw or nut size in inch pound s (in-lbs). Table 6: Recommended Torque Settings Screw or Nut Size Toque (in-lbs) 4-40 6 6-32 12 8-32 22 10-32 37 12-24 50 ¼-20 [...]

DP O E™ Power System User Manual Part Number: PN380C POWER PLANT MOUNTING AND WIRING WARNING: Ensure all AC and DC power sources are off and disconnected. 8 Mechanical Mounting The DP O E™ Power System chassis is i nstalled in a st andard EIA 19” rack. It is recommended that one person lift the chassis into the prope r rack plac e while anoth[...]

DP O E™ Power System User Manual Part Number: PN380C AC Input Slip the cord bracket around each cord ( PANDUIT part # CORD-****), as sho wn in Figure 7: Cord Bracket . Plug the cord into the proper rece ptacl e on the back of the chassis (S ee Figure 8: Chassis (Rear View) - AC Connections ), then secure the cord bracket to the chassis usi ng the[...]

DP O E™ Power System User Manual Part Number: PN380C The DP O E™ Power System Chassi s allows a bulk DC conne ction as shown in Figure 12: Chassis (Rear View) - DC Connections . The bulk DC conne ction may be optionally used to ensure continued power to the connected DP O E™ Power Patch Pa nels and the PD connected to the panel s in the event[...]

DP O E™ Power System User Manual Part Number: PN380C TEST AND TURN-ON Once all AC and DC connections have been se cured and checked, install each re ctifie r sequentially by sliding and latching it into the chassi s as illustrated in the section below. Rectifiers The rectifiers for use in the DP O E™ Power System are equipped with Light Emittin[...]

DP O E™ Power System User Manual Part Number: PN380C 12 TROUBLESHOOTING The modular nature of this DP O E™ Power System m akes diagnostics and rep air easy. Make sure that all rectifiers are properly seat ed and latched into their respective slot s. Make sure all power and signal connectors are properly mated. Table 8: Troubleshooting Alarm Pro[...]