Patton electronic 2616RC инструкция обслуживания

Model 2616RC T1/E1 TDM Digital Access Con centrator (T-DAC) Model 3096RC G.SHDSL TDM Digital Access Con centrator (T-DAC) Model 3196RC iDSL TDM T-DAC Administrator ’ s Reference Guide Sales Office: +1 (301) 9 75-1000 Techni cal Support: +1 (301) 975-10 07 E-mail: support@ patton.com WWW: www . patton.com Part N umb er: 07MD3096RC-ARG, Rev . F Rev[...]

Patton Electronics Company , Inc. 7622 Ric kenbacker Drive Gaithersburg , MD 20879 USA Tel: +1 (301 ) 975- 1000 Fax: +1 ( 301) 8 69-929 3 Support: +1 (30 1) 975 -1007 URL: www.patton.com E-Mai l: suppo rt@patton.com Copyright Statement Copyright © 2012 , Patton Electroni cs Comp any. All r ights reserved. Notices The information con tained in this[...]

3 Summar y T able of Contents 1 Introduction ........... ...... ...... ..... ...... ......... ...... ...... ..... ...... ......... ...... ...... ..... ......... ...... ...... ..... ...... ...... ......... ...... . 33 2 Home .......... ...... ...... ...... ...... ........ ...... ...... ...... ...... ........ ...... ...... ...... ........ ...... ....[...]

4 T able of Contents About this guide ................ ........... ........... ................. ............ ........... ........... ................. ........... ............ ........... .......30 Audience ............ ........... ............ ................ ............ ........... ........... ............ ................. ........... .......[...]

5 Models 2616RC, 3096RC & 3196 RC Admin Reference Guide Alar m Severi ty Con figurat ion .................. ........... ................. ............ ........... ........... ........... ................. ............ . 54 5 DS0 Mapping ......... ...... ...... ..... ...... ......... ...... ...... ..... ......... ...... ...... ...... ..... .....[...]

6 Models 2616RC, 3096RC & 3196 RC Admin Reference Guide Type A .............. ........... ........... ........... ................. ............ ........... ........... ............ ................ ............ ........... .......73 Port A ... ............ ........... ................. ........... ........... ............ ........... .........[...]

7 Models 2616RC, 3096RC & 3196 RC Admin Reference Guide Carrier S ense Errors ( dot3StatsCa rrierS enseErrors) ... ........... ................. ............ ........... ........... ................. .......88 Receiv ed Fram es Too Long (d ot3Stat sFram eTooL ongs) .................. ........... ................. ........... ........... .......[...]

8 Models 2616RC, 3096RC & 3196 RC Admin Reference Guide Monito red Events (N3 93)(frDl cmiMonito redEvents) .... ........... ........... ................. ........... ............ ........... .......98 Mult iCast Servi ce (frD lcm iMult icast) ....................... ................. ........... ............ ........... ................. .....[...]

9 Models 2616RC, 3096RC & 3196 RC Admin Reference Guide CO Configurat ion tabl e .......... ........... ............ ........... ................. ........... ............ ........... ................. ........... ... ..121 CPE Configu ration t able .............. ........... ........... ............ ................. ........... ........... ..[...]

10 Models 2616RC, 3096RC & 3196 RC Admin Reference Guide Error S tatist ics tab le ........... ........... ................. ........... ........... ............ ................. ........... ........... ........... ... ........147 iDSL Alarm Threshol ds Per 15 Mi nute Int erval . ................. ............ ........... ........... .........[...]

11 Models 2616RC, 3096RC & 3196 RC Admin Reference Guide Rx Time Slot (sy sMgmtSlo tRx) ..... ................. ............ ........... ........... ............ ................ ............ ........... .....177 HDLC Statistics .......... ........... ........... ............ ................. ........... ........... ............ ........... ..[...]

12 Models 2616RC, 3096RC & 3196 RC Admin Reference Guide Saving your wor k ......... ................ ............ ........... ........... ............ ................. ........... ........... ........... ..... ......188 IP A ddres sing Over vie w wind ow .............. ............ ........... ................. ........... ............ ......[...]

13 Models 2616RC, 3096RC & 3196 RC Admin Reference Guide Interface (ipNetToMediaIfIndex) ....... ........... ............ ........... ........... ................. ........... ............ ........... .....196 Net Address (ipNetToMediaNetAddress) ........... ................. ........... ............ ........... ........... ................. ..[...]

14 Models 2616RC, 3096RC & 3196 RC Admin Reference Guide w/Erro rs (icmpInE rrors, icmpOut Errors) . ........... ........... ............ ........... ................. ........... ........... ...........204 Destinatio ns Unreachable (IcmpInDestUnrea chs, IcmpOutDestUnreachs) ........... ........... ........... ...........204 Times Exceeded (icm[...]

15 Models 2616RC, 3096RC & 3196 RC Admin Reference Guide T1/E1 port and DS 0 select ion ............. ........... ........... ............ ........... ................. ........... ........... ............ ........... .....21 8 PPP window ....................... ........... ........... ............ ................. ........... ........... ....[...]

16 Models 2616RC, 3096RC & 3196 RC Admin Reference Guide Tx Underrun s (framere lTxUnderru n) ................. ........... ............ ........... ........... ................. ........... ...........226 LINK Resets (framerelReset s) ....... ................. ............ ........... ........... ............ ................ ............ ....[...]

17 Models 2616RC, 3096RC & 3196 RC Admin Reference Guide Authenti cation Technique (pppAuthenticationTechni que) ........ ........... ................. ........... ........... ...........231 Authenti cati on Side (pppAut henticat ionSi de) ........... ........... ........... ............ ........... ................. ........... .....232 Authen[...]

18 Models 2616RC, 3096RC & 3196 RC Admin Reference Guide No Such Names (snmpInNoSuchNames) ................ ............ ........... ........... ................. ........... ...........242 Bad Values ( snmpInBad Values) .................... ........... ............ ........... ........... ................. ........... ...........243 Error St a[...]

19 Models 2616RC, 3096RC & 3196 RC Admin Reference Guide General Inform ation (boxM anufact ureGen eralInfo) ...... ................. ............ ........... ........... ........... ...........258 CPLD Revision (boxCPLrevi sion) ..... ................. ........... ............ ........... ........... ................. ........... ...........25[...]

20 Models 2616RC, 3096RC & 3196 RC Admin Reference Guide User Password ( boxSnmpMonito rPassword) ....... ........... ............ ................. ........... ........... ........... ...........264 User Password Verific ation (bo xSnmpVerifyP assword) ........ ........... ............ ................ ............ ........... .....265 System [...]

21 Models 2616RC, 3096RC & 3196 RC Admin Reference Guide Daemons .......... ........... ........... ................. ........... ............ ........... ........... ................. ........... .... ............. ...........280 SysLog Daemon IP Addres s(syslog DaemonIP ) ............... ............ ........... ................. ........... [...]

22 Models 2616RC, 3096RC & 3196 RC Admin Reference Guide Time Elapsed (dsx1TimeEl apsed) ...... ................. ............ ........... ........... ............ ................ ............ ........... .....295 Valid Intervals (dsx1 ValidIntervals) .................... ............ ................. ........... ........... ........... .....[...]

23 Models 2616RC, 3096RC & 3196 RC Admin Reference Guide Near End Li ne Stat istics— Total s .................... ........... ............ ................. ........... ........... ........... ............ ................305 Errored Seconds (dsx1To talESs) ........ ............ ........... ........... ............ ................. .........[...]

24 Models 2616RC, 3096RC & 3196 RC Admin Reference Guide 21 About .......... ......... ...... ...... ...... ..... ......... ...... ...... ..... ...... ......... ...... ...... ..... ......... ...... ...... ...... ..... ...... ......... ...... .. 311 Introd ucti on ................. ............ ................ ............ ........... .........[...]

25 List of Fi gures 1 T-DAC login window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 2 HTTP/HTML and SNMP object form at . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 3 HOME window for Model 2[...]

26 Models 2616RC, 3096RC & 3196 RC Admin Reference Guide 48 Remote Ethernet loopback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110 49 Line loopback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [...]

27 Models 2616RC, 3096RC & 3196 RC Admin Reference Guide 99 Define an H.110 Management Chan nel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166 100 Defined In-Band Mana gement Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .[...]

28 Models 2616RC, 3096RC & 3196 RC Admin Reference Guide 150 Alarm Card Informa tion window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 273 151 Critical Cha ssis Alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [...]

29 List of T ables 1 Text conventi ons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 2 Mouse conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 3 F[...]

30 About this guide This guid e desc ribes c onfigur ing a Patto n Elec tronic s Model 2616 RC T1/E1 Time Divis ion Mult iplexed (TDM) Digit al Access Concentrat or (T-DAC), Model 3096 RC G.SHDSL TDM T-DAC, or Mode l 3196 iDSL TD M T-DAC. This section describes the following: • Who sh ould us e this guide (see “Audience” ) • How this docume[...]

31 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide About this guide • Chapter 13 ( on page 207) descri bes using th e Filter IP wi ndow • Chapter 14 ( on page 215) discus ses in -band manageme nt using PPP • Chapter 15 ( on page 234) descri bes using t he RIP Vers ion 2 window • Chapter 16 ( on page 240) descri bes using t he SNMP[...]

32 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide About this guide Mouse conventi ons Table 2 lists c onventions this g uide use s to desc ribe mouse actio ns: Table 2. Mou se conv enti ons Convention Meaning Left mouse button This button refers to the primary or leftmost mouse butto n (unless you have chan ged the default config uration[...]

33 Chapter 1 Introduction Chapter cont ents Introd ucti on ................. ............ ................ ............ ........... ........... ............ ................. ........... ......... ........ ................. . 34 Logging into the HTTP/HTML Web Management wind ows ........................... ........... ........... ............ .....[...]

Introduction 34 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 1 • Introd uct ion Intr oduction You can manage t he Model 261 6RC T1/E1 Time Di vision Mult iplexed ( TDM) Digital Acce ss Conce ntrator (T-DAC), Mode l 3096RC G. SHDSL TDM T-DAC, or Model 31 96RC iDSL T DM T-DAC by using its internal HT TP/HTML W eb Management windo ws. H[...]

HTTP/HTML an d SNMP Object Format 35 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 1 • Introd uct ion HTTP/HTML an d SNMP Object Format In this document, we shall describe the variables f ound on each of the inter nal HTTP/HTM L windows. T his descri ption will include brief d efinitions of the Patto n Enterprise M IB or SNMP MIB II o[...]

36 Chapter 2 Home Chapter cont ents Introd ucti on ................. ............ ................ ............ ........... ........... ............ ................. ........... ......... ........ ................. . 37 Product infor mation b ox ..................... ........... ........... ............ ................. ........... ........... ..[...]

Introduction 37 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 2 • Home Intr oduction The T-DAC Web Management HOME window for the Mod el 2616RC ( see figu re 3 ), Model 3096RC (s ee figu re 4 on pag e 38), or Model 3196RC (see fi gure 5 on page 38) is the first management window that you see after logging into the T-D AC. Figure 3. HO[...]

Introduction 38 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 2 • Home Figure 4. HOME window for Model 3096RC Figure 5. HOME window for Model 3196RC[...]

Introduction 39 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 2 • Home The HOME window consists of sect ions that enable you to: • View general pr oduct info rmation a bout th e T-DAC, su ch as the cu rrent soft ware vers ion (see se ction “Product information box” on page 40) • View a sum mary of the system’ s operating sta[...]

Produ ct inform ation b ox 40 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 2 • Home Figure 6. HOME window panes (Mo del 3096RC version shown) Figure 7. Product information section of HOME window (Model 30 96RC version shown) Product information box The produc t inform ation box (see figur e 7 ) disp lays the follow ing: • Prod uct [...]

Operating statu s variables 41 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 2 • Home – X denotes a major release involvi ng an extensive system revisi on. – Y indicates a revi sion within Releas e X adding one o r more new features. – Z denote s a revi sion withi n Releas e X.Y correcting problems that were found i n the p rev [...]

Operator Actions 42 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 2 • Home Curr ent Ca rd Sta te (ala rmBox Stat e) The highest level alarm cu rrently active on this T -DAC card—listed as Critical (red) , Maj or (orange), Minor (yellow), o r Clea r (green)— no alarms present. T otal Card Alarm s (ala rmT ota l) Total number of ala[...]

Operator Actions 43 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 2 • Home Set Fact ory Defa ult Con figur ati on ( forc eDefa ult Conf ig(3) ) This button d eletes the current configuration from Flas h memory and loads the factory default parameter s into Flash. The fac tory default se ttings will not take effect in the T-DAC u ntil [...]

44 Chapter 3 Impor t/Expor t Chapter cont ents Introd ucti on ................. ............ ................ ............ ........... ........... ............ ................. ........... ......... ........ ................. . 45 Expo rt curr ent F lash co nfigu ration ............................ ............ ........... ........... ............[...]

Introduction 45 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 3 • Import/Export Intr oduction The Import /Export func tion enables you to mak e a backup (or exported ) copy o f your T-DAC’s configuration parameters. By exporting the con figurations, the saved files can quickly be loaded, or imported , into a replace- ment T-DAC— g[...]

Export current Flash configuration 46 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 3 • Import/Export To export the Flash c onfiguratio n, click on th e Export Flash li nk on the Import/Ex port main window. The T- DAC will di splay text configurat ion in format ion r esem bling that sh own i n figu re 11 . Figure 11. Typical T-DAC fla[...]

Impor t Flas h confi guratio n fro m file 47 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 3 • Import/Export Import Flash configuration fr om fil e To impo rt a configuration f ile into the T -DAC, type the complete p ath and fi lename for th e configuration f ile you wish to load or click on the Browse… button to s elect the desire[...]

48 Chapter 4 Alarms Chapter cont ents Introd ucti on ................. ............ ................ ............ ........... ........... ............ ................. ........... ......... ........ ................. . 49 Alarm System Overview window .............. ............ ........... ................. ........... ............ ........... ...[...]

Introduction 49 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 4 • Alarms Intr oduction The T-DA C provides alarm facilities that monitor the operating st atus of the T-DAC’s power supply, 309 6RC G.SHDSL and T1/E1 po rts, 31 96RC iDSL and T1/E1 ports, and 261 6RC T1/E1 po rts, and ambient tempe r- ature. The T-DAC provides three ala[...]

Alarm System Overview wi ndow 50 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 4 • Alarms Figure 13. Alarm System Overvie w window (Model 3096 RC version shown) The T-DAC uses three methods to indicate an alarm condition: • Front panel LED and rear blade indications— The front panel AL ARM LED and rear blade ALARM LED uses th e fo[...]

Alarm System Overview wi ndow 51 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 4 • Alarms Figure 14. Sample alarm indications • Management web page indication—The Alarms section (see figure 14 ) of the Alarm System Overview wi n- dow ( see figu re 13 on page 50) uses color-coded highlighting to indicate which alarms are acti ve an[...]

Alarms ma nageme nt windo ws 52 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 4 • Alarms Figure 15. Alarms management diagram Figure 16. Alarm System Configuration window Alarms management windows As shown in figure 1 3 on page 50, the Alar ms System Overview window provides links to the following alarm system management windows: • [...]

Alarms ma nageme nt windo ws 53 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 4 • Alarms If it has been configured t o do so, the T-DAC can also se nd Sysl og and SNMP trap messages to an external alarm management host. This section des cribes how to configure the Syslog and/o r SNMP trap alarm respon se outputs. Figure 17. Modify Par[...]

Alarms ma nageme nt windo ws 54 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 4 • Alarms Alarm Trap Manager 1 thr ough 4 (alarmTrapIp0–al armTrapIp3) S imple N etw ork Ma nag ement Prot ocol (SNM P) tr ap daemon s are a tool f or ma nagi ng TC P/ IP ne twor ks, t hey are a simple method of alerting a management host of a problem wit[...]

Alarms ma nageme nt windo ws 55 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 4 • Alarms • informationa l(7) —Being informational in nature , these alarms only appear as blue highlighting on the Alarm S ystem mai n window to i ndicate that an event has occur red, they do not generate alarm ind ications anywhere else. • ignore(0)[...]

56 Chapter 5 DS0 Mapping Chapter cont ents Introd ucti on ................. ............ ................ ............ ........... ........... ............ ................. ........... ......... ........ ................. . 58 DS0 Mapping Overview main window .......... ........... ............ ........... ........... ................. ...........[...]

57 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 5 • DS0 Mapping ID (daxConnectionID) ...................... ............ ........... ........... ................. ............ ........... ........... ........... ........ .... . 72 Fallbac k ............ ........... ........... ................. ........... ............ ........... ..[...]

Introduction 58 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 5 • DS0 Mapping Intr oduction To route traffic f rom one d evice co nnected to th e T-DAC to another device (a lso conne cted to the T-D AC) you must de fine a DS0 mapping (also c alled an intern al connection or cross-connection ). An internal cross-connection carries traf[...]

DS0 Mapping Overview mai n window 59 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 5 • DS0 Mapping The following types of internal connections can be de fined (n ote that DSL c onnect ions can not be def ined for the 2616 RC: • Between a DSL po rt and a T1/E1 WAN port • Between a DSL port and another DSL port • Between a DSL po [...]

DS0 m app in g an d in- ban d ma nag emen t 60 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 5 • DS0 Mapping • Static Connection s ectio n whe re you c an view the prev iou sly define d DS0 mappi ngs (cross-connections) in the T -DAC (see se ctio n “Defined Mappings Table (S tatic Con nections) ” on page 72) DS0 mapping and in-b[...]

DS0 Fa llba ck Co nfigura tion window 61 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 5 • DS0 Mapping When Chass is Management C hannel is imple mented, the followin g guideline will assist in achieving maxi- mum user-data th roughput th rough the Mode l 3096RC T-DAC: • Total number of si mplex DS0s u sed to map G.SHDSL and/o r T1/[...]

DS0 Fa llba ck Co nfigura tion window 62 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 5 • DS0 Mapping Figure 22. Fallback Mapping help window W atch the f ollowing ports for a failure state The Watch the following ports for a failure state section parame ters (s ee figur e 19 on pa ge 58) de fin e the pr imar y channel in a fa llback[...]

DS0 Fa llba ck Co nfigura tion window 63 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 5 • DS0 Mapping To define value for the time slots p arameter, you will enter a text string sp ecifying which time slot numbers will be used for the c hannel. You must enter the text string using a prescri bed notation compr ised of the follow ing e[...]

DS0 Fa llba ck Co nfigura tion window 64 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 5 • DS0 Mapping Fallback Port Ty pe (daxFallb ackTypegshDSL) This parameter defines the p ort type for the f allback channel. Sele ct one of the f ollowing value s from the drop - down me nu: • none(0) • t1-e1( 1) • gshDSL(4) (Model 3 096RC) o[...]

DS0 Fa llba ck Co nfigura tion window 65 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 5 • DS0 Mapping Fallback Port Slo ts (daxFallb ackSlotH110) This par ameter de fines wh ich time slots wil l compri se the fallback r eceiv e channel fro m the H.110 b us to t he T-DAC f or the fallbac k mapping. U se the same notation as fo r Watch[...]

Display Option parameter 66 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 5 • DS0 Mapping 2. Click the Connection ID number hyperlink to display the DS0 Fallback ID window fo r the s elected co n- nection ID. Deleting a Fallb ack Mapping To delete the Fallbac k Mapping displa yed on the DS0 Fallback ID window : 1. In the drop-down men[...]

Mapping He lp 67 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 5 • DS0 Mapping Mapping Help Clicking on the Mapping He lp button disp lays the DS0 Mapping Help window (see figure 20 ). The DS0 Mapping Help page prov ides a convenient online tutorial on how to use the T-DAC’ s web management pages to define DS 0 mappings (cro ss-conn[...]

Conf iguring stat ic con nection s usi ng the lo ng for m 68 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 5 • DS0 Mapping Note Both channels of the connection ca n be T1/E1 or bo th sides c an be G.SHDSL (Mod el 3096RC) o r iDSL (Mod el 3196RC) o r just th e B cha nnel cou ld be config ure d (i n th e ev ent yo u ne eded to c reat e [...]

Conf iguring stat ic con nection s usi ng the lo ng for m 69 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 5 • DS0 Mapping iDSL (Model 3 196RC) ports; 4 , 8, 12, o r 16 T1/E1 WAN p orts; or 3 2 H.110 ports. Wi thin each p ort type, port numbers b egin with 1 and end wi th the total number of p or t s o f t ha t ty p e ( f or e x am p [...]

Defi ning D S0 map pings u sing th e comm and l ine int erface (CLI) 70 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 5 • DS0 Mapping Although t he first string ab ove is val id syntax, t he seco nd string is e asier t o read, and more clearl y shows w hat is going on. T he fol lowing str ings are al so valid syntax: • 1-2,5,6,7 ,15[...]

Defi ning D S0 map pings u sing th e comm and l ine int erface (CLI) 71 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 5 • DS0 Mapping Note You must define the same number of time slo ts for each si de of the con- nection. In ot her words , the number of time slots defi ned for Slots A must be the same as the number of time slots defi [...]

Sav ing a DS0 ma ppin g defin itio n 72 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 5 • DS0 Mapping CLI Ex ample # 3 To define a map ping betw een G.SHDSL modem p ort 6, ti meslots 1– 16, and G.S HDSL modem por t 20, timeslots 1– 16, type the following text : G.SHDSL:6:1-16/G.SHDSL:20:1-16 After enteri ng the parameters required[...]

DS0 Conne ction ID (DAX Connec tion ID) window 73 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 5 • DS0 Mapping • Type B d axNewMapTypeFrom daxNewMapTy peH110 • Port B daxNewMapNu mberFrom daxNew MapNumb erH110 • Slots B daxFallbackSlotFrom daxNewMapSlotH 110 Ty p e A Displays the t ype of inter face port the T- DAC uses for th [...]

DS0 Conne ction ID (DAX Connec tion ID) window 74 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 5 • DS0 Mapping Deleting a DS0 Mappin g To delete the DS0 Mapping displayed on the DS0 Connection ID window: 1. In the drop-dow n menu for th e Connection Status p arameter, ensure th at the value delete(1 ) is selected. 2. Click the submi [...]

75 Chapter 6 System Clocking Chapter cont ents Introd ucti on ................. ............ ................ ............ ........... ........... ............ ................. ........... ......... ........ ................. . 76 System Clocking Configur atio n window .............. ........... ........... ............ ........... ...............[...]

Introduction 76 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 6 • System Cl ocking Intr oduction During operation all modules within a ForeFront chassi s (or within eac h chassis segment in the Model 6676) synchroni ze TDM com munications on al l DS0 channels w ith a common clo ck pulse, called the reference clock. System clocking par[...]

System Clo cking Co nfigura tion wind ow 77 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 6 • System Cl ocking Figure 26. System Clocking Configuration window System Clockin g Configur ation wind ow The Syst em Cl o cki ng Co nf i gu rat io n window enables you to d efine the sy stem clockin g parameters and view cer- tain clocking st[...]

System Clo cking Co nfigura tion wind ow 78 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 6 • System Cl ocking Clock Referen ce (sysGSClockMode) The Cloc k R ef er enc e parameter d efines the clocking mode for the 3096RC. The clocking mode you assign to the T-DAC d efines whether o r not it provides the m ain refer ence clock to the [...]

System Clo cking Co nfigura tion wind ow 79 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 6 • System Cl ocking Main Refere nce (sysgs hDSLClockMainRe f) and Fallbac k Referenc e (sysgsh DSLClockFal lbackRef) Whe n a T- DAC ’s clo ck ing m ode i s defi ned to be Mast er or Se con dar y, th e T-D AC System Clocking Configura- tion w i[...]

System Clo cking Co nfigura tion wind ow 80 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 6 • System Cl ocking Figure 28. Available sources for T-DACS for Main and Fallback reference cl ocks Cards operatin g in Sla ve clocki ng mode will defa ult to Syst em clo ck (provi ded by Mas ter or Se condar y cards) for main and fal lback refe[...]

System Clo cking Co nfigura tion wind ow 81 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 6 • System Cl ocking • wan-15(15)—use WAN port #1 5 for the cloc k source • wan-16(16)—use WAN port #1 6 for the cloc k source • internal( 200)—use the in ternal free-running osc illator for the clock source. Clocking Sta tus (s ysdax[...]

System Clo cking Co nfigura tion wind ow 82 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 6 • System Cl ocking • Secondar y System Fail—The clock signal provid ed by the blade in the cPC I chassis wit h its clocking mode define d as Second ary has failed. • Fallback Indi cation—The T- DAC has switc hed its clocking so urce to [...]

System Clo cking Co nfigura tion wind ow 83 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 6 • System Cl ocking Immediate action s buttons The immediate acti ons buttons with their respec tive function s are desc ribed below : • Clear Errors —Clic king t he Clear Errors button (see figure 26 on page 7 7) clea rs the T-DAC ’s erro[...]

84 Chapter 7 Etherne t Chapter cont ents Introd ucti on ................. ............ ................ ............ ........... ........... ............ ................. ........... ......... ........ ................. . 85 Ethernet Overview win dow ........... ................. ........... ............ ........... ........... ................. .[...]

Introduction 85 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 7 • Eth erne t Intr oduction The acce ss ser ver prov ides management and st atistic al info rmation in the Ethernet O verview window (see figu re 32 ). Det ailed inform ation regarding th e SNMP MIB II variab les may be d ownloa ded from RFC 1643, Definitions of M anaged O[...]

Ethernet Overview win dow 86 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 7 • Eth erne t • linkIndication10 0M(5)—Ethe rnet is 100M • linkIndication10 0Duplex( 6)—Ethernet i s 100M full duplex Primar yIp Address (bo xEtherAPr imar yIpAdd ress) The primary Ethernet IP address. Primar yIp Mask (boxEth erAPrimar yIpM ask) The pr[...]

Ethernet Statistics window 87 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 7 • Eth erne t Ethern et Stati stics window The Ethernet Statistics window (see figure 32 ) shows statistics about the Ethe rnet interface . To reach this win- dow, s elect Ethernet Statistics from the Ethernet Overvi ew window (see fig ure 31 on page 85). Fig[...]

Ethern et Co nfigur ation w indow 88 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 7 • Eth erne t Other Errors (dot3StatsInter nalMacT ra nsmitErrors) The number of frames transmiss ion on a fails du e to an i nternal MAC sublayer transmit error. Carrier Sense Er rors (dot3Sta tsCarrierSe nseErrors) The number of times that the carrie[...]

Ethern et Co nfigur ation w indow 89 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 7 • Eth erne t • adminOff(2 )—Ethernet interface has been turned off by setting techniq ue to disable • linkIndication10 M(3)—Eth ernet is 10M • linkIndic ation10Du plex(4)—E thernet is 10M full duplex • linkIndication10 0M(5)—Ethe rnet [...]

Ethern et Co nfigur ation w indow 90 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 7 • Eth erne t Secondar yIpFilters ( boxEtherASecond aryIpFilte rs) Filters pack ets based on the f ilters assigned to the Secondary IP add ress of the Et hernet port. Enter the Filter ID number (see figure 34 on page 89) of one or mo re filte rs config[...]

91 Chapter 8 Frame Relay Chapter cont ents Introd ucti on ................. ............ ................ ............ ........... ........... ............ ................. ........... ......... ........ ................. . 93 Con figur ing a Fr ame Rel ay lin k ...................... ........... ............ ........... ................. ........[...]

92 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 8 • Frame Relay Thro ughp ut (bit s) (fr Circu itThro ughp ut) ....................... ........... ........... ................. ........... ............ ........... .....100 IP Addr ess (FrameIPAddr ) ............ ........... ........... ............ ................. ........... .....[...]

Introduction 93 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 8 • Frame Relay Intr oduction The T-DA C offer s in-band m anagement over Fram e Relay or PPP (p oint-to-p oint protoc ol) links in the T 1/E1 chan ne ls. The T-DAC ’s Fra me Rel ay su bsy ste m ma nag es the in-band management function over Frame Relay links. This chapte[...]

The Frame Relay main wi ndow 94 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 8 • Frame Relay Figure 35. Frame Relay main window The Frame Relay mai n window The Frame Rela y main window di splays diagnostic info rmation abou t the Frame Relay link, and lists complete statis tics/c onfig uratio n info rmatio n for e ach WAN link that [...]

The Frame Relay main wi ndow 95 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 8 • Frame Relay Note If t he Frame Relay win dow onl y show s th e Pro duce Sta tus Cha nge Trap setting (see figure 36 ), you need to do the follow ing in the T1/E1 Link se ction : • Chang e the Line Type fo r a WAN por t from Other(1) to an ap pro- priat[...]

DLMI window 96 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 8 • Frame Relay Message En ds (framer elRxMess ageEnds) The numbe r of packets receive d with message-cor rect endings. This value in creases each time a v alid Frame Relay packet i s received . Packets T oo Long (framerelRx PacketTooLo ng) The numb er o f pack ets r ece ive[...]

DLMI window 97 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 8 • Frame Relay Fig ure 37 . DLMI wi ndo w Signalling (f rDlcmiState) Inband signalling used to c ommunicate l ink and PVC status betwee n the User equipment and the Network equipme nt. LMI is the gen eric term used to i ndicate Fr ame Relay signal ing, howev er the three sp[...]

DLCI window 98 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 8 • Frame Relay Full Enquiry Interval (N391)(f rDlcmiFullEnq uiryInterval) Status Enq uiry mess ages are of two di fferent v arietie s: 1) Link Integrity Verification , which simply exchange sequence n umbers between p eers and 2) Full Status mes sages, which i s a request f[...]

DLCI window 99 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 8 • Frame Relay W i t h i n e a c h D L M I a r e o n e o r m o r e D a t a L i n k C h a n n e l I d e n t i f i e r ( D L C I s ) . T h i s i s t h e i d e n t i f i c a t i o n o f a P V C within the Fram e Relay link. There will be at least one PVC automatically installe[...]

DLCI window 100 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 8 • Frame Relay • needIPadd r(4)—This is when the IP addr ess needs to b e entered for th is DLCI. • wait4p eer(5)— In this state, the Link is waitin g for the far end to s ynchroniz e. Committed Burst (bits) (frCircuitCommitedBurst) This specifies the committed dat[...]

101 Chapter 9 G.SHDSL (Model 3096RC) Chapter cont ents Introd ucti on ................. ............ ................ ............ ........... ........... ............ ................. ........... ........ . ........ ........... .....103 G.SHDSL Port Configur atio n window ..................... ............ ........... ................. ..........[...]

102 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 9 • G.SHDSL (Mo del 3096RC ) Refresh Cur rent Page but ton ......... ........... ........... ............ ................. ........... ........... ........... ............ ................129 Calcula te Best Lin e Rate bu tton ......... ............ ........... ........... ...........[...]

Introduction 103 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 9 • G.SHDSL (Mo del 3096RC ) Intr oduction The T-DAC’s G.SHDSL por t subsys tem compr ises 16 G.SH DSL ports fo r connect ion to ex ternal G.SHDSL CPE modems at nx64 da ta rates up to 2 .304 Mbps. Each G.SHDSL po rt consis ts of an inter nal G.SHDSL modem whose signals a[...]

G.SH DSL Port Confi guratio n wind ow 104 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 9 • G.SHDSL (Mo del 3096RC ) The G.SHDS L Por t Con figu rati on window provides links to the wind ows show n in the figu re 40 . Figure 40. G.SHDSL management windows map The G.SHDSL Port Configuration web management page shows the high- level sta[...]

G.SH DSL Port Confi guratio n wind ow 105 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 9 • G.SHDSL (Mo del 3096RC ) • Number of gshDSL Por ts in Test Mode (numgshDSLPorts InTestMod e)—Total num ber of G.SHDSL ports for whic h the T- DAC oper ator has de fined the Test Mode par ameter defined as one of the f ollowi ng: - Local Loo[...]

G.SH DSL Port Confi guratio n wind ow 106 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 9 • G.SHDSL (Mo del 3096RC ) Figure 43. G.SHDSL Port Status sectio n of G.S HDSL Port Configuration window G.SHDSL port status The G.SH DSL por t st at us sect ion of t he G. SHDSL P ort Configu ration wind ow ( see figu re 43 ) sh ows the ove r- a[...]

G.SH DSL Port Confi guratio n wind ow 107 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 9 • G.SHDSL (Mo del 3096RC ) State (gshDSLState ) The Stat e parameter indicates the c urrent real-time o perating state of the por t. Possible values ar e: • idle(0) —Th e Desired State fo r the port is curren tly defined to be idle(0). This s[...]

G.SH DSL Port Confi guratio n wind ow 108 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 9 • G.SHDSL (Mo del 3096RC ) Figure 45. Color-coded port status example Color-code d port status ind icators The G.S HDSL port s tatus table u ses the foll owing color-c odes (se e figure 4 5 ) to indicate the status of each port: • Green—T he [...]

G.SH DSL Port Confi guratio n wind ow 109 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 9 • G.SHDSL (Mo del 3096RC ) • remSerL oop(8) • remEthLoop(11) Oth erwis e, dis play -only with a valu e of off (9 ) . Until the G.SHDSL link is established, the T est Mode value off(9) will appear in display-only form. Once the link is establi[...]

G.SH DSL Port Confi guratio n wind ow 110 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 9 • G.SHDSL (Mo del 3096RC ) • remEthLoop(11) —For Patton C PE G.SHDSL modems that provide an Ethernet port, (such as models 3201 and 3086) , and are r emotely co nnected to this G.SHDSL port, r emEthLo op(11) change s the ope rat- ing mode of [...]

G.SH DSL Port Confi guratio n wind ow 111 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 9 • G.SHDSL (Mo del 3096RC ) • remS erLoop (8) • remEthL oop(11) Oth erwis e, dis play -only with a valu e of off (9 ) . Until the G.SHDS L link is established, the G.SH DSL Port Status tabl e will display a dash (-) in the Tes t Pat- tern colu[...]

G.SH DSL Port Confi guratio n wind ow 112 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 9 • G.SHDSL (Mo del 3096RC ) Payload Rate (gshDSLPayloadR ate) Display-only on the G.SH DSL Port Status page. Configurable on the G.SHDSL Port Details window. Shows the curr ently defi ned payload r ate (i.e. data r ate as opposed to line r ate) fo[...]

G.SHDSL Port Details window 113 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 9 • G.SHDSL (Mo del 3096RC ) G.SHDSL Port Details w indow The G.S HDSL P ort De tail s w indo w (s ee figure 5 0 ) provides detailed management information and functions for a single selected T-DAC G.SHDSL port. The G.SHDSL P ort Details wind ow displays det[...]

G.SHDSL Port Details window 114 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 9 • G.SHDSL (Mo del 3096RC ) Figure 51. Port # links The G.SHDS L Por t De tai ls window is organized i nto the following groups: • Operator ac tion buttons at the top o f the page • G.SHDSL Port Status and Statistics ta bles below the op erator action b[...]

G.SHDSL Port Details window 115 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 9 • G.SHDSL (Mo del 3096RC ) • Refresh Current Page —Refreshes the d isplay. When you clic k the Refres h Curren t Page button, the T- DAC retri eves parameter v alues currently stored in DRAM and disp lays them on the page. An y config- urable parameter[...]

G.SHDSL Port Details window 116 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 9 • G.SHDSL (Mo del 3096RC ) Figure 54. G.SH DSL Port status and statistics sections of the G.SH DSL Port Details window G.SHDSL por t status and statistics tables The G.SHDS L Por t De tai ls page displays port status and statisti cs informat ion organiz ed[...]

G.SHDSL Port Details window 117 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 9 • G.SHDSL (Mo del 3096RC ) • Syn c Sta te (gsh DSLS ync Sta te ) —Indicates the curr ent state of synchr onization on the line connecting this G.SHDSL port and the re mote CPE modem . One of the foll owing values will b e displayed: - outOfSyn c(0) - a[...]

G.SHDSL Port Details window 118 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 9 • G.SHDSL (Mo del 3096RC ) • DPLL Loc ked (gshDSLD PLLLo cked)—Ind icates whe ther the DSL port’s in ternal cl ock genera tor is pha se- locked wi th its extern al reference clock . One of the fo llowing values wi ll be displayed : - locked(1) - notL[...]

G.SHDSL Port Details window 119 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 9 • G.SHDSL (Mo del 3096RC ) History Details table Note The title for the Histor y Deta ils table also functions as a hyperlink. Click the History De tails link to display the G.SHDSL Port History of Near-End Perf ormance window which provides a record of er[...]

G.SHDSL Port Details window 120 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 9 • G.SHDSL (Mo del 3096RC ) Figure 55. G.SHDSL port configuration se ction of the G. SHDSL Port Deta ils window Port configuratio n tables The G.SHDS L Por t De tai ls window displays port conf ig uration inform atio n in two po rt conf igura tion ta bles, [...]

G.SHDSL Port Details window 121 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 9 • G.SHDSL (Mo del 3096RC ) Figure 56. G.SHDSL port conf iguration sect ion in Change mode • Change mo de—You ca n view all the par ameter values and m odify the v alues for some of the parameters (see figure 5 6 ). In Change mode, the T-DAC displays a [...]

G.SHDSL Port Details window 122 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 9 • G.SHDSL (Mo del 3096RC ) Note The Line P rovision Rate pa rameter l abel al so funct ions as a hyper link. Click the Li ne Prov ision R ate hyp erlin k to open the G.SHDSL Line Provisio n window (see “G.SHDSL Line Provision window” on page 129 ). •[...]

G.SHDSL Port Details window 123 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 9 • G.SHDSL (Mo del 3096RC ) • Ena bl e EOC (gs hDSLEOCEnab led)—Def ines whether the T-DAC ca n modify the remote CP E configura- tion by downl oading c onfigur abl e port p aramet ers to the remotely conn ected CPE dev ice over the G.SH DSL link. The f[...]

G.SHDSL Port Details window 124 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 9 • G.SHDSL (Mo del 3096RC ) - b5(5) - b6(6) - b7(7) • Anne x Typ e (gsRMAnnex)—D efines the Annex typ e to be used on the link connected to this port . The fol- lowing values may be defined: - annex-A(1)—Typical ly used in North Americ a - annex-B(2 )[...]

G.SHDSL Port Details window 125 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 9 • G.SHDSL (Mo del 3096RC ) - LocalL oop(11) —The CP E’s G. SHDSL po rt is oper ating in local loop back mo de as sh own i n figure 58 . Figure 58. CPE lo cal loopback When the CPE is in Local Loop mode (see fi gur e 58 ), the T-DAC can comm unicate wit[...]

G.SHDSL Port Details window 126 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 9 • G.SHDSL (Mo del 3096RC ) - Active— The switch i s toggled to the botto m position. T he 3086 is ope rating in Remote Loop back mode as shown in figure 6 0 . Figure 60. CPE remote loopback Saving y our wo rk Once you have defi ned your d esired va lues [...]

G.SHDSL Port History of Near- End Performance window 127 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 9 • G.SHDSL (Mo del 3096RC ) Figure 61. His tory of Near-End Performance window G.SHDSL Po rt Histor y of Near-En d Performance window For eac h of the T-DAC 16 G.SHDS L ports , the T-DAC c ollects p ort error s tatistics in 15-m inu[...]

G.SHDSL Port History of Near- End Performance window 128 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 9 • G.SHDSL (Mo del 3096RC ) The G. SHDSL Port History of N ear End Performance window also prov ides hype rlin ks fo r re turni ng to t he Sys- tem History and Port De tails wind ows as shown in fig ure 62 on page 127. The fo llowin[...]

G.SHDSL Line Provision window 129 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 9 • G.SHDSL (Mo del 3096RC ) • Severely Errored Se conds (SES) (historySESgshDSL) —Indi cates the tota l cumulative numb er of seco nds in which there were one or more CRC errors on this port d uring the 15-minute interval. The T-D AC will not incremen[...]

G.SHDSL Line Provision window 130 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 9 • G.SHDSL (Mo del 3096RC ) Calculate Best Line Rate button Click the Calculate Best Line R ate button (see figure 64 ) to activate the tool. The T-D AC will compute th e best line rate for the link giv en cu rrent condit ions. During the p rocedure, the [...]

131 Chapter 10 iDSL (Model 3196RC) Chapter cont ents Introd ucti on ................. ............ ................ ............ ........... ........... ............ ................. ........... ........ . ........ ........... .....132 iDSL Port Confi guration wind ow .................. ................. ........... ............ ........... ......[...]

Introduction 132 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 10 • iDSL (Mo del 3196RC ) Intr oduction The 3196RC T-DAC’ s iDSL port subsystem compr ises 16 iDSL p orts for co nnection to ext ernal iDSL CPE modems at a maximum speed of 144 kbps. Each iDSL port co nsists of an internal iDSL modem whose signals are presente d on a tw[...]

iDSL P ort C onfigur ation window 133 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 10 • iDSL (Mo del 3196RC ) Figure 66. iDSL port summary statu s se ction of iDSL Port Configuration window Th e iD S L po r ts w e b m a na g em e n t p a ge s h ow s t h e hi gh - le v el s t at u s s u mm a ry f or a l l 1 6 iD S L p o rt s , p l u s[...]

iDSL P ort C onfigur ation window 134 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 10 • iDSL (Mo del 3196RC ) • Number of iDSL Por ts Training (numidslTraining)—Total number of iD SL port s which ar e in the pro cess of attempting to estab lish a logical data link connection with a re mote iDSL CPE mo dem. • Total Flap Count (n[...]

iDSL P ort C onfigur ation window 135 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 10 • iDSL (Mo del 3196RC ) Circuit ID (idslCircuitID) Conf igurabl e. The C ircuit ID par amete r pr ovid es a w ay fo r yo u to de fi ne a free-text name (character string) that identifies each ci rcuit (link) conne cted to the T-DAC. Alt hough the ta[...]

iDSL P ort C onfigur ation window 136 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 10 • iDSL (Mo del 3196RC ) Figure 69. Color-coded port status example Color-code d port status ind icators The iDSL Po rt Status table d isplays co lored ro ws (se e figu re 6 9 ) to indicate port status for each port. The color- code d indic ation s a[...]

iDSL P ort C onfigur ation window 137 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 10 • iDSL (Mo del 3196RC ) Until the iDSL port is activated, the Test Mod e value none(0 ) will ap pear in dis play- only form. Once the link i s established and port state changes to datam ode(6) , the Te st Mode drop-dow n menu will appear. • local[...]

iDSL P ort C onfigur ation window 138 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 10 • iDSL (Mo del 3196RC ) • lineLoop(3) —The T-DAC’s i DSL port will o perate in l ine loopback mode as shown in figure 72 . For the CPE re motely connec ted to this port, you can use lineLoop (3) mode to test the iDSL link fro m the CPE to the [...]

iDSL P ort C onfigur ation window 139 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 10 • iDSL (Mo del 3196RC ) CPE Device (idslRemoteM odelCode) Displays m odel number o f Patton remote CPE device connected to the i DSL port, thes e include: - none(0), - model1092 (17), - model1092 RC(18) , - model1092 A(19), - model1092 ARC(20), - mo[...]

iDSL Por t De tail s win dow 140 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 10 • iDSL (Mo del 3196RC ) iDSL Por t D etail s win dow The iDSL Po rt Details window (see fi gure 73 ) prov ides de taile d man ageme nt in forma tion a nd fun ctio ns for a sin- gle selected T- DAC iDSL port. The iDSL Port Detail s window displays detaile[...]

iDSL Por t De tail s win dow 141 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 10 • iDSL (Mo del 3196RC ) 3. Clic k the Port # number link (see figure 74 ). Figure 74. Port # links The iDSL Port Deta ils window is organized i nto the foll owing g roups: • Operator ac tion buttons at the top o f the page • iDSL Port Status and Stat[...]

iDSL Por t De tail s win dow 142 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 10 • iDSL (Mo del 3196RC ) Clickin g on t he Clear Errors button reset s the following counters: - Near End CRC Erro rs - Far En d CRC E rrors - Link Dro ps (FLAPs) (g shDSLFlapC nt) - Test Patter n Errors (gshD SLPattError Cnt) - Errore d Sec (g shDSLE rro[...]

iDSL Por t De tail s win dow 143 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 10 • iDSL (Mo del 3196RC ) - localLoo pBack(4) - remote LoopB ack(5 ) - dataMo de( 6) - lineDown(7) - lineLoo pback(8 ) - testP attern(9) • Activ ation St ate (id slActiv ationSta te)—The operat ing softwa re for each iDSL port includes a modul e called[...]

CPE informatio n and confi guration 144 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 10 • iDSL (Mo del 3196RC ) • Una vaila ble Time (idslUnavilSec ond)—Total cu mulative time in second s (since the last power cycle) that the li nk state fo r this po rt has be en down . CPE informatio n and configurati on The Po rt Deta ils page [...]

iDSL Near End Performance Interval 145 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 10 • iDSL (Mo del 3196RC ) Figure 78. CPE configurable paramete rs window • Serial Rate—Select from the f ollowing: - rate19-2k( 0) for serial r ate of 19200 bps - rate32k(1) for seri al rat e of 3200 0 bps - rate56k(1) for seri al rat e of 5600 0[...]

iDSL Near End Performance Interval 146 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 10 • iDSL (Mo del 3196RC ) - 15 Minutes Interv als Since Activation Figure 79. Near End Performance i n the Current 15 minute Interval The T-DAC discards port statistics information more than 24 hours old. The iDSL P ort Histo ry of Nea r End Performa[...]

iDSL Near End Performance Interval 147 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 10 • iDSL (Mo del 3196RC ) Figure 81. Sy stem History Overvi ew window (Model 3196RC shown) Back T o System History Page hyperlink Click the Ba ck To System H istory Page link (see figur e 80 on page 146) to disp lay the System History Overvi ew windo[...]

iDSL Near End Performance Interval 148 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 10 • iDSL (Mo del 3196RC ) • Una vaila ble Secon ds (UAS) — Indicates the total cumulati ve number of se conds that the iDSL port was unavailable during the 15-minute interval. Total cumulative time in seconds that the link state for this port has[...]

149 Chapter 11 In-band management Chapter cont ents Overview ................. ................. ........... ........... ........... ............ ................. ........... ........... ......... . ....... ................. .....151 Introd ucti on ................. ............ ................ ............ ........... ........... ............ ..[...]

150 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 11 • In-band management Rx Po rt (sy sMgmt Por tRx) .................. ................. ........... ............ ........... ........... ................. ........... ...........177 Rx Time Slot (sy sMgmtSlo tRx) ..... ................. ............ ........... ........... ...........[...]

Overview 151 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 11 • In-band management Overv iew This chapt er de scribe s how to config ur e in-band management channels. The “Introduction” sect ion desc ribes the architecture and use of in-band management channels . Succeeding se ctions desc ribe the three typ es of in- band manageme[...]

Introduction 152 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 11 • In-band management Figure 82. In-band management This chapt er give s instr uctions on how to defi ne Fr ame Relay and PPP remote in-band management channels with examples . Secondly the creatio n of Chassis Managemen t Channels are explained in detail for PPP IPCP an[...]

In-Ba nd Manage ment Ove rview wi ndow 153 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 11 • In-band management Figure 83. In- Band Management Overview window (Model 2616RC shown) In-Ban d Manag ement Overview window Access ed by clic king on the In-Band Mgmt hype rlink in the Configuration Menu pane, the In-B and Man age- ment Ove r[...]

Defini ng a T1/E 1 Manage ment Ch annel 154 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 11 • In-band management Defin ing a T1/ E1 Ma nagement C hannel A T1/E1 in-band management channel can be created ov er any active T1/E1 WAN port. The f ollowing exam- ples show how to define a T1/E1 management channel: • Frame Relay Management[...]

Defini ng a T1/E 1 Manage ment Ch annel 15 5 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 11 • In-band management To view whether a slot is used as a timeslot or a voice channel, click on the Channel As signment link in th e T1/E1 Link window. Also, see page 295 and pag e 300 in Chapter 20, “T1/E1 Link” . The WAN Circu it CHANN E[...]

Defini ng a T1/E 1 Manage ment Ch annel 156 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 11 • In-band management Examp le 1: T1 /E1 Fram e Relay Manage ment Chan nel Do the foll owing to create a Frame Rela y channel on T1/E1 p ort #1 , timeslots 1–4: Figure 86. Define a T1/E1 Management Channe l window, frameRelay(3) functi on sel[...]

Defini ng a T1/E 1 Manage ment Ch annel 157 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 11 • In-band management Figure 88. Defined In-Band Ma nagement Channels section Note You can al so dire ctly access the DLCI co nfigurati on page by c licking on the DLCI… li nk under the IP Address and IP Mask columns. From the DLCI configurat[...]

Defini ng a T1/E 1 Manage ment Ch annel 158 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 11 • In-band management Examp le 2: T1 /E1 Rou ted P PP Mana gement Channe l Do the foll owing to create a PPP channel on T1/E1 port #2 , timeslot s 1-2: Figure 90. Define a T1/E1 Management Channel window, ppp(5) function selected 1. Set the par[...]

Defini ng a T1/E 1 Manage ment Ch annel 159 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 11 • In-band management Status . Once LCP has finished the negotiation of the config uration val ues, the l ink is in th e UP state. But for data trans fer to occur, the N etwork Contro l Protocol (NCP) must be es tablished. In this exampl e, the[...]

Defining a Chassis (H.110) Management Channel 160 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 11 • In-band management IP Add ress is the local IP address of the PPP link in BCP applications. This IP address shou ld be a different subnet th an the subnet of the T- DAC (i.e., the IP add ress assigned to the Eth ernet port and the subn[...]

PPP-IPCP Chassis Management C hannel 161 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 11 • In-band management PPP-IPC P Chassi s Managem ent Cha nnel The co nfigur able p arame ters whe n ini tially d efinin g a Chassis Management Channel are described b elow: Name This is a user-defi ned name for the ma nagement cha nnel for ease in[...]

PPP-IPCP Chassis Management C hannel 162 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 11 • In-band management • Tx Port (sysMgmtPor tTx)—The p ort number on which the lo cal T-DAC transmits the in-band manage- ment data. The po rt selected must be the same as that selected for the receive port at the remote T -DAC. Parame ter v a[...]

PPP-IPCP Chassis Management C hannel 163 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 11 • In-band management Figure 94. Default gateway address example Figure 94 illustrates whe n the Default Gateway box is normally checked. The diagram shows the management station accessing the chassis via the front panel Ethernet port of a T-DAC c[...]

PPP-IPCP Chassis Management C hannel 164 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 11 • In-band management Exam ple 1: Ro uted PP P (IPC P) Ch assi s Managem ent Cha nnel This example is to make a routed-PPP chassis manage ment channel between three T-D AC’s, which may be any of the Mode ls’ 3096RC , 3196RC or 2616RC. The chan[...]

PPP-IPCP Chassis Management C hannel 165 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 11 • In-band management After the channe l is UP, the In-Band Mgm t web pag e sh ould ap pear simil ar to figur e 96 . Figure 96. Defined In-Band Management Channels The de finit ions of v ariou s columns are simi lar to th e T1/E1 management channe[...]

PPP-IPCP Chassis Management C hannel 166 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 11 • In-band management Figure 98. Defined In-Band Management Channels Clic k on th e Modify Manage ment Channels… link. Yo u are now able to select ppp-bcp(2) in the Protocol Type column. Then click on Modify button in the Acti on co lumn. 2. We [...]

Defi ning a G .SHDS L Manage ment C hann el 167 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 11 • In-band management The Mode l 2616RC makes the T1/E 1 Management Channel to th e “outs ide” worl d, such as the NOC, as th e default g ateway. The p revious s ection fo r T1/E1 in-band management channels in this c hapter de scribes [...]

Defi ning a G .SHDS L Manage ment C hann el 168 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 11 • In-band management Note It is very impor tant that these addresses do not exist on the E thernet side. If t hey do, both the 3 096RC and the ex isting device will attempt to reply to ARP req uests. Configu re the M odel 30 96RC fo r a G.[...]

Defi ning a G .SHDS L Manage ment C hann el 169 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 11 • In-band management be /25 or smaller. Th e BCP links IP addresses must be withi n this / 25 subnet. (See s ection “Example 1: Configuring a BCP brid ged G.SHDSL link for management traffic only” on page 169). The new values of these [...]

Defi ning a G .SHDS L Manage ment C hann el 170 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 11 • In-band management If you are connec ting the se rial port on t he remote CPE to a devic e, then you will need to map times lots 2–3 to its d estination in t he 3096RC. ( If the r emote CPE’ s seri al port is not to be used, do not m[...]

Defi ning a G .SHDS L Manage ment C hann el 171 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 11 • In-band management 3096RC G.SHDSL Man agement Link S tatus To view the status of the G.SHDSL management link, cli ck on the DOW N hyperlink in the Status colu mn on the In-Band Mgmt main web page. This provides both the Connection Detail[...]

Defi ning a G .SHDS L Manage ment C hann el 172 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 11 • In-band management Transmit • Octets —The number of octets tran smitted as data to the remote CPE . This includes frames transmitted in the negotiation ph ases. • Frames —The number of PPP (HDLC ) frames transmitted to the remote[...]

Defi ning a G .SHDS L Manage ment C hann el 173 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 11 • In-band management 1. Click on the G.SHDSL hyperlink in the Interfa ce Type column to go direc tly to the G.SHDSL P ort Con- figuration page. Configure the Name p aramet er he re. Name —This parameter is configured on the G.SHDSL Port [...]

Defi ning a G .SHDS L Manage ment C hann el 174 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 11 • In-band management 3096RC G.SHDSL Man agement Link S tatus To view the status of the G.SHDSL management link, cli ck on the DOW N hyperlink in the Status colu mn on the In-Band Mgmt main web page. This provides both the Connection Detail[...]

Defi ning a G .SHDS L Manage ment C hann el 175 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 11 • In-band management Transmit • Octets —The number of octets tran smitted as data to the remote CPE . This includes frames transmitted in the negotiation ph ases. • Frames —The number of PPP (HDLC ) frames transmitted to the remote[...]

The Chassis Managemen t Channel statistics page 176 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 11 • In-band management The Chassis Management Cha nnel statisti cs page Figure 101 shows th e stati stics f or a Cha ssis M anagem ent Ch anne l. Figure 101. H.110 In-Band Management S tatistics page Connection ID (sysMgmtC onnectionID) [...]

The Chassis Managemen t Channel statistics page 177 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 11 • In-band management Connection Details IP Address ( sysMgmtIpAddres s) Specifies the IP address of the Ethernet inte rface for the Fo reFront mod ule on the remot e side of the C hassis Mana geme nt Chan nel) . This IP addr ess must i[...]

IP Routing table modifications 178 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 11 • In-band management Rece ive Fram es (s ysMgmt RxM essage Ends) Indicates th e total number o f HDLC fr ames receiv ed since the PP P link was last rebo oted or p ower-cycled. Receive Fram es Too Long (sy sMgm tRxPac ketTooLo ng) Indicates t he total [...]

179 Chapter 12 I P ( I P, T C P, U D P, & I C M P ) Chapter cont ents Introd ucti on ................. ............ ................ ............ ........... ........... ............ ................. ........... ........ . ........ ........... .....183 IP Overview window .......... ........... ................. ........... ............ .......[...]

180 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 12 • I P (IP, TC P, UDP , & I CMP) Mask (genRout eMask) ............ ........... ........... ............ ........... ................. ........... ........... ............ ........... .....19 1 Gateway (genR outeGateway) .. ........... ........... ............ ........... ........[...]

181 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 12 • I P (IP, TC P, UDP , & I CMP) Retra nsmit- Timeout Ma ximum (t cpRt oMax) ..... ........... ............ ................. ........... ........... ........... ...........199 Maximum Conn ections (tc pMaxConn) ... ........... ................. ........... ............ .........[...]

182 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 12 • I P (IP, TC P, UDP , & I CMP) Address Mask Requests (icmpInAddrMasks) ( icmpOutAddrMasks) ........... ........... ........... ................. .....206 Address Mask Replys (icmpInAddrMa sksReps) (icmpOutAddrMasksReps) ........... ........... ................. .....206[...]

Introduction 183 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 12 • I P (IP, TC P, UDP , & I CMP) Intr oduction The T-DA C’s IP subsystem manage s addressi ng and routing parameters and statistics pertaining to IP protocol operation on the T-DAC. Managing the IP s ubsystem involves monitoring IP statistics and p arameters, and d[...]

IP Overview window 184 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 12 • I P (IP, TC P, UDP , & I CMP) IP Over view window The IP Overview window provides hyper links to the window s shown in figure 103 . Figure 103. IP Overview window and related windows The IP Overview window displays certain IP statistics as well as the status[...]

IP Overview window 185 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 12 • I P (IP, TC P, UDP , & I CMP) Hyperlinks The IP Overview window provides the following hyp erlinks to the windows s hown in figure 1 03 . You can use these pages to view and modify the values o f certain IP parameters: • TCP —Clic ki ng th e TCP hyperlin[...]

IP Overview window 186 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 12 • I P (IP, TC P, UDP , & I CMP) Default Time-To- Live The default value inserte d into the time-to-live field o f the IP header of datagrams originated at the T-DAC, when ever a T TL val ue is no t su ppli ed by the tran spo rt l ayer pro toco l. IP S tati sti[...]

IP Overview window 187 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 12 • I P (IP, TC P, UDP , & I CMP) Note The Out Requ ests counter does not i nclude any datagrams c ounted in ipF orwDa tagram s. Out Discards The number of output IP datagrams for which no prob lem was enco untered to preve nt their transmission to their destina[...]

IP Conf igurat ion win dow 188 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 12 • I P (IP, TC P, UDP , & I CMP) # Valid but Discarded The num ber of routing entrie s which wer e chos en to be discarded eve n though they are v alid. One pos sible reason for discarding such an entry could be to make more bu ffer sp ace availab le fo[...]

IP Addre ssing Overvie w window 189 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 12 • I P (IP, TC P, UDP , & I CMP) Note To save your changes permanen tly, you must visit the T-DAC HOME pa ge, and cl ick the Save Current Configuration button. When you clic k the Save Current Con figuration button, the T- DAC will copy the configu[...]

IP Routing Overview window 190 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 12 • I P (IP, TC P, UDP , & I CMP) Entr y Reas sembl y Maxi mum S ize (i pAdEnt Reas mMax Size) The size of the largest IP datagram whic h the T-DAC ca n re-assembl e from inco ming IP fragmented d atagrams receive d on t his int erface . IP Routing O ver[...]

IP Routing Overview window 191 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 12 • I P (IP, TC P, UDP , & I CMP) Mask ( genRo uteMask ) Indicates the mask to be logical-AND ed with the des tination address b efore being compared to the value in the ipRoute Dest field. Fo r those system s th at do not suppor t arbitrary subnet ma sk[...]

IP Routing Overview window 192 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 12 • I P (IP, TC P, UDP , & I CMP) • agedout(4)—Invalid route (soo n to be removed). • costly(5) —A valid r oute, but no t in use be cause of it’s higher co st. Defined Routes This po rtion of the IP Routi ng Informatio n window is where you can[...]

IP Route Details window 193 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 12 • I P (IP, TC P, UDP , & I CMP) IP Route D etails window The IP Rout e Detai ls window (see figure 10 8 ) displays the nex t-hop routin g parameters for the sin gle destina- tion address di splayed in the p age title to display th e Route Destination wind[...]

IP Routing Table window 194 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 12 • I P (IP, TC P, UDP , & I CMP) • rip(4 )—Learned via recep tion of R IP packet. • icmp(5)— Learned v ia reception o f ICMP packet. Seconds S ince Upda ted (genRoute Age) The numbe r of seco nds since this ro ute was last upd ated or othe rwise de[...]

IP Routing Table window 195 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 12 • I P (IP, TC P, UDP , & I CMP) Destinatio n (ipRouteDest) The destina ti on IP ad dre ss of this r out e. A n entr y wit h a v alue of 0.0 .0.0 i s con sid ered a defa ult rout e. Mul tip le routes to a single destination can appear in the table, but acc[...]

IP Address Translation Overview window 196 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 12 • I P (IP, TC P, UDP , & I CMP) • user(2)— Added by an ad ministrat or on the I P Routin g Info rmation table or vi a SNMP manageme nt tools. • dspf(3 )—Not cu rrently impl emented. • rip(4 )—Learned via recep tion of R IP packe[...]

IP Address Translation Overview window 197 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 12 • I P (IP, TC P, UDP , & I CMP) Net Address ( ipNetToMediaNetAddre ss) The IP address corresponding to the media-dependent physical address. Physical (ipNetTo MediaPhy sAddress) The media-dependent physical address. Type (ipNetTo MediaType)[...]

TCP Overview window 198 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 12 • I P (IP, TC P, UDP , & I CMP) Figure 111. TCP Overvi ew window TCP Overview window Trans missi on con trol p rotoc ol (T CP) fit s in t he Tra nspo r t layer (layer 4 ) of the OSI mo del, above the Internet Protocol (IP). It is among the most widely used pr[...]

TCP Overview window 199 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 12 • I P (IP, TC P, UDP , & I CMP) Details… hyperlin k Click on the Details… link (se e figu re 111 on page 198) to display the TCP De ta il s win dow. Th e TCP Details window is desc ribed i n secti on “TCP Details window” on page 2 00. TCP Pa rameters [...]

TCP Details window 200 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 12 • I P (IP, TC P, UDP , & I CMP) Current ESTABLISHED (tcp CurrEsta b) The numbe r of TCP connecti ons for whic h the current state is either ESTAB LISHED or CL OSE-WAIT. Total Rece ived (t cpInSegs) The total number of segments received, including thos e rece i[...]

UDP Overview wind ow 201 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 12 • I P (IP, TC P, UDP , & I CMP) Remote Port (t cpCo nnRemPo rt) The remote port number for this TCP connection. State (tcpCon nState) The st ate of this T CP conne ction. Th e only val ue which may be set by a management stati on is deleteTCB(12) . According[...]

UDP Overview wind ow 202 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 12 • I P (IP, TC P, UDP , & I CMP) The UDP Ov e rvi ew window (see figure 114 ) disp lays the curr ent v alues of cert ain U DP opera ting p aramet ers and U DP oper ating statis tics. To disp lay the UDP m ain win dow, o n the T -DAC c onfigu ration menu pane,[...]

ICMP Overview wi ndow 203 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 12 • I P (IP, TC P, UDP , & I CMP) ICMP Over view window When net working proble ms or und esirabl e condi tions o ccur, the ICMP protoc ol is use d for co mmunicatin g con- trol or e rror inf ormation plus t esting. The st atistics l isted o n the T-DAC ICMP [...]

ICMP Overview wi ndow 204 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 12 • I P (IP, TC P, UDP , & I CMP) configuration is to block the ICMP re direct messages because i n some instances they could alter the routing table with un desir able eff ects, wh ich is consid ered a b reach o f secur ity. The op tion s ar e: • allowRedi[...]

ICMP Overview wi ndow 205 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 12 • I P (IP, TC P, UDP , & I CMP) • The port on the host is unav ailable; a specified so urce route fai led • A pack et must be fragme nted (that is, broken up into two or more pa ckets) but the pac ket was sent anyw ay with inst ructions not to be f ragm[...]

ICMP Overview wi ndow 206 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 12 • I P (IP, TC P, UDP , & I CMP) Time Stamp Replys (i cmpInTimesta mpsRep s) (i cmpOut Timesta mpsR eps) The nu mber of I CMP t imest amp reply mess age s re ceived /se n t. This message is part of a time stamp (see “Time Stamps (ic mpInTim estamps, icmp I[...]

207 Chapter 13 IP Filterin g Chapter cont ents Introd ucti on ................. ............ ................ ............ ........... ........... ............ ................. ........... ........ . ........ ........... .....208 IP Filtering Overvi ew window ............. ........... ........... ............ ........... ................. ........[...]

Introduction 208 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 13 • IP Filterin g Intr oduction The acce ss ser ver soft ware pro vides a n IP filt ering system that enables you to set up securi ty as we ll as to provi- sion se rvic es for selecte d custo mers. While IP f ilter s ar e typically thought of as a secur ity measure, many [...]

IP Filter Configuration wi ndow 209 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 13 • IP Filterin g Def inin g a new f ilt er To define a new filter, enter an ID number and a name, the n click on the Define button to subm it the reques t. The number and name must not al ready exis t in the Defined Filte rs lis t, and the number must [...]

IP Filter Configuration wi ndow 210 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 13 • IP Filterin g Dire ction (filt erIpD irect ion) Specifies the direction of the filter (that is, whether it applies to data packets i nbound or outbound f rom the access serve r). The f ilter only appl ies to dial i n users, users on other i nterface[...]

IP Filter Configuration wi ndow 211 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 13 • IP Filterin g Address (filterIpSourceIp) The IP address to which the filter will compare the s ource IP address. Mask (filterIpSourceMask) The subnet m ask the filter will ap ply to the sourc e IP address to mak e the compari son. Note These fields [...]

An example of using a filter 212 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 13 • IP Filterin g Destinat ion Port Applies the fi lter action base d on the st ated comparison to the destinati on port number Comparison (filte rIpDestinationPortCmp) • noCompare( 0) – no comparison to the destination port in the IP packet • equal([...]

An example of using a filter 213 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 13 • IP Filterin g – Source IP and mask: not set – Destinatio n IP: 192.10.10.1 mas k: 255.255.2 55.255 – Source Por t: no comp are – Destinatio n Port: equal 110 for POP3 or 25 for SMTP – Prot ocol : not set – TCP Established: anyPackets – De[...]

An example of using a filter 214 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 13 • IP Filterin g Now if you wanted to add the ab ility to ping to test the dial-in users connectiv ity to the network, the following filter w ould be create d: • ID:4 • Name: P ING • Dire cti on: b ot h • Action: pass • Source IP and mask: not s[...]

215 Chapter 14 PPP Chapter cont ents Introd ucti on ................. ............ ................ ............ ........... ........... ............ ................. ........... ........ . ........ ........... .....218 T1/E1 port and DS 0 select ion ............. ........... ........... ............ ........... ................. ........... .....[...]

216 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 14 • PPP Message Ends (fram erelRxMessageEnds) ....... ............ ........... ........... ................. ........... ............ ........... .....226 Pack ets Too Long (f ramere lRxPa cketT ooLong ) ............. ............ ........... ........... ................. ........... [...]

217 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 14 • PPP Octets Sent (pppActSentOctets) .................... ............ ........... ........... ............ ................ ............ ........... .....230 Octets Rec eived (pppAc tReceivedOc tets) ...... ............ ........... ........... ................. ........... ........[...]

Introduction 218 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 14 • PPP Intr oduction The T-DA C offer s in-band m anagement over Fram e Relay or PPP (p oint-to-p oint protoc ol) links in the T 1/E1 channels. The T-D AC’s PPP subsystem manages the T-DAC’s in-band manageme nt function ov er PPP links. This chapt er discu sses in-ba[...]

T1/E1 port and DS0 selection 219 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 14 • PPP Figure 120. WAN C ircuit Configuration Link window 2. Clic k on Channe l Assignment l ink (see figure 120 ) to access the WAN Circuit Channe l Assignment window (see figure 121 ). Options for the T1/E1 DS0s displayed on this page are: – clear(9 )[...]

PPP wind ow 220 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 14 • PPP 3. Use the drop d own menu to select ppp(5) (PPP) for the designated management channels. 4. Use the drop d own menu to select Cle ar fo r the user data DS 0s. Onc e the cha nne l(s ) i s se t to PP P, th e P PP ne go tiat io n phase will begin. Only one PPP link c[...]

PPP wind ow 221 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 14 • PPP • onl ineIpcp (9)—Ipc p has been n egotiated and both si des have agreed on Ip addresses and dat a can be passed across the link IP Addre ss (pppSer viceIpA ddress) The IP address assigned and negotiated fo r this interface. The def ault IP address is 192.168.2[...]

Def au lt pa cke t s etti ngs wi ndow 222 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 14 • PPP Figure 124. Modify default packet settings window IP address Clicking on the IP addre ss link (see figur e 122 on page 220 ) di splays the Modi fy default packet settings win dow (see figure 124 ) displays the PP P link window which gives [...]

Modify default packet settings window 223 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 14 • PPP Authentication Usernam e (pppDefaultAuthe nticationUsername) This is the username that w ill be sent to the remote si de if the rem ote machine is authentic ating. If the local server is authen ticating, the username that the remote s ends[...]

Modify default packet settings window 224 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 14 • PPP Authentication T echnique (pp pDefaultAuthentication T e chnique) Technique to b e used for authenticating: • none(0)—No authe ntication will be used (default) • pap( 3)—passwo rd authenti cation protoc ol will be u sed • chap(4)[...]

PPP link window 225 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 14 • PPP Compression (ppp DefaultIpCompression) If none(1) th en the local node will not attempt to ne got iate any IP compression option. Otherwise, the local node will attempt to negotiate c ompression mode indicated by the enumerated value. Changing this objec t will[...]

PPP link window 226 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 14 • PPP No Buffers Availabl e (framerelR xNoBufferAvailab le) The numbe r of packets rec eived when no r eceive buff ers were av ailable. Data Over flow (fr amerelRxD ataOverflow ) The numb er o f pack ets r ece ived with over flow in dicat ed by t he h ardwa re . Mess[...]

PPP link window 227 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 14 • PPP Authentication Side ( pppAut henticatio nSide) This is the side of the link which will be authenticating • local(1)—local se rver will be authenticating. Remote ne eds to log into local server. • remote(2)— remote server will be authentication. Lo cal n[...]

PPP link window 228 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 14 • PPP PPP Statisti cs Bad Addre ss ( pppStat BadAddres ses) The nu mber of p ackets r eceiv ed wit h an incor rect addr ess field. Bad Con trols ( pppSta tBadCont rols) The number of packets received on this link with an incorrect control field. Packets Too Long ( pp[...]

PPP link window 229 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 14 • PPP Local PPP Protocol Comprs n (pppStatLocalToRemotePr otComp) Indicates whethe r the local PPP entity will use protocol compr ession when transmit ting packets to the remote PPP entity. This setti ng becomes active w hen the link is in the up—able to pass pac k[...]

PPP link window 230 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 14 • PPP IP S tati stic s Operational Status (ppp IpOperStatus) The current o perational state of the interface. T hese are the availabl e options : • up(1)— able to pass p ackets • down(2 )—unable to pass pack ets • testi ng(3)— in test mo de and un able to[...]

Modify Link Configuratio n window 23 1 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 14 • PPP Modify Link Configuratio n window Clicking on the Modify… link in the PPP link window (see figure 125 on pa ge 225) disp lays the Modify Link Config uration window (se e figu re 126 ) where you can modify indiv idual link settings. Figure 1[...]

Modify Link Configuratio n window 23 2 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 14 • PPP Authentication Side ( pppAut henticatio nSide) This is the side of the link which will be authenticating • local(1)—local se rver will be authenticating. Remote ne eds to log into local server. • remote(2)— remote server will be authe[...]

Modify Link Configuratio n window 23 3 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 14 • PPP Allow Magic Number Negot iation (p ppMagicNumber) Determines if mag ic number negotiation sh ould be done • enabled(1) —enable magi c numb er negotiation • disable d(2 )—disa ble mag ic nu mber ne goti atio n[...]

234 Chapter 15 RIP V ersion 2 Chapter cont ents Introd ucti on ................. ............ ................ ............ ........... ........... ............ ................. ........... ........ . ........ ........... .....235 RIP Version 2 Overview window ... ........... ............ ........... ................. ........... ............ ....[...]

Introduction 235 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 15 • RIP Version 2 Intr oduction The T- DAC prov ides supp ort fo r Routing Informatio n Protoc ol (RIP ) Vers ion 2. The T-DAC RIP versio n 2 subsystem provides management information in the form of RIP Version 2 addresses, parameters, and statis- tics. Managing the RIP v[...]

RIP Versi on 2 Ov erview wind ow 236 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 15 • RIP Version 2 Defined RI P Addresses • Address (xxx.xxx .xxx.xxx) (rip2IfC onfAddre ss) — Each IP Ad dress i n the tab le def ines a singl e rout ing domain in a si ngle subne t for th e T-DAC—to use when maki ng RIP routing decisio ns. Note [...]

RIP V ersion 2 Statis tics 237 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 15 • RIP Version 2 – rip1Co mpatible ( 3)—rip1Co mpatible imp lies br oadcast ing RIP-2 update s using RFC 1058 rout e sub- sumptio n rules – ripV ersio n2 (4) —ripV ersion2 impli es mul ticast ing RIP- 2 upda tes 3. Enter the pro tocol vers ion to be[...]

RIP Version 2 (Configuration) window 238 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 15 • RIP Version 2 Bad Packets (rip2IfStatRcvBadPac kets) The nu mber of RIP response packet s receiv ed by th e RIP proc ess wh ich were subseq uently discarde d for any reason (e.g. a version 0 packet, or an unknown command type ). Bad Routes ( ri[...]

RIP Version 2 (Configuration) window 239 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 15 • RIP Version 2 Address (rip2IfConfAddress) The IP Addres s of this system on the indicate d subn et. For unnumbered interfaces, the v alue 0.0.0. N, where the least significant 24 bits ( N) is the ifIndex for the IP Interface in network byte ord[...]

240 Chapter 16 SNM P Chapter cont ents Introd ucti on ................. ............ ................ ............ ........... ........... ............ ................. ........... ........ . ........ ........... .....241 SNMP Overview window .............. ........... ............ ................. ........... ........... ............ ...........[...]

Introduction 241 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 16 • S NMP Intr oduction The T-DAC SNMP subs ystem provid es management and statistical i nformation about the operation o f the SNMP p rot ocol on the T-DA C. RFC 34 18: Manage ment Inform ation Base ( MIB) for the Simple Netw ork Management Protocol ( SNMP) prov ides det[...]

SNMP Overvi ew window 242 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 16 • S NMP The following sect ions describe the statistical counts display ed in the In and Out columns on the SN MP win- dow, as well as the configur able parameter for Authenticati on Failure Traps. SNMP Pa rameters (snm pEnable AuthenT raps) This value indica t[...]

SNMP Overvi ew window 243 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 16 • S NMP Bad Va lues (snmpI nBadValues). The total number of SNMP PD Us that were delivered to the SNMP pr oto- col entity and f or which the value of the er ror-status field is badV alue. Error Statu s “Read O nly” (snmp InReadOnlys). The total number of va[...]

SNMP Overvi ew window 244 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 16 • S NMP Get Reques ts (s nmpOutGet Requests) . The total number o f SNMP Get-Request PDU s that have been gen- erated by the SNMP protoc ol entity. Get Next Requests (snmpOutGet Nexts). The total number of S NMP Get-Nex t PDUs that have been gener - ated by the[...]

245 Chapter 17 System Chapter cont ents Introd ucti on ................. ............ ................ ............ ........... ........... ............ ................. ........... ........ . ........ ........... .....248 System Status Ove rview win dow .................... ........... ............ ........... ........... ................. ......[...]

246 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 17 • S yst em Running S ince Last B oot (sysUpTi me) ......... ............ ........... ................. ........... ........... ............ ........... .....261 System Ma nager (sy sContac t) ...... ............ ........... ........... ................. ............ ........... ....[...]

247 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 17 • S yst em Histo ry of N ear End Pe rforman ce: G.SH DSL o r iDSL Por t wind ow ...................... ........... ........... ........... ...........270 Interval (gshDSLIntervalNumb er) ........... ........... ............ ........... ................. ........... ........... .....[...]

Introduction 248 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 17 • S yst em Intr oduction The Sy ste m Sta tus Ove rvi ew wi ndow provi des syst em-l evel in formati on about th e Model 30 96RC, 3196RC , or 2616RC T- DAC. The inf ormation inc ludes ph ysical status and system status (see figu re 131 ), and Ethe rn et status, T1/E1 po[...]

System Status Overview window 249 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 17 • S yst em Figure 13 2. System Status Overview w indow (part 2 of 2) (M odel 3096RC shown) • Ethernet Status —Displays the l ink status and speed of t he T-DAC’ s Ethernet links (s ee f igure 132 ). • T1/E1 Port Information table —Displays the[...]

System Status Overview window 250 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 17 • S yst em Hyperlinks As shown in figure 1 33 o n page 250, the System Status Overvi ew window also provides links to the System Sta- tus Details window (see section “System Status Details window” on page 257) , System Para mete rs window (s ee sect[...]

System Status Overview window 251 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 17 • S yst em Figure 135. Physical status table and Refresh Rate menu Physic al status tabl e The Physic al Sta tus section of the System Status Over view window (see figure 135 ) lists the possibl e cond itions of the T-DAC components (see tab le 5). Tabl[...]

System Status Overview window 252 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 17 • S yst em Refresh Rate pa rameter This p aram eter (s ee figure 135 on page 251) se lects how of ten the System Status Overview win dow i s r ef r e sh ed . The use r-s elec ta ble opti ons are : • none(0) • rate10sec(10) —Ref resh ever y 10 seco[...]

Ethernet Status table 253 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 17 • S yst em • Primary cloc k. A flashing r ed star (see figure 137 on pag e 252 ) indicates there is an alarm condition i n the primary clock. A green s quare denotes that the pr imary cloc k is functi oning proper ly. • Fallback clock . A flashing red star [...]

T1/E1 Port Information tab le 254 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 17 • S yst em Figure 139. T1/E1 port information T1/E1 Port In formation table The T 1/E1 Port Information table (see figur e 139 ) displays status inf ormat ion in three catego ries: • Config ure —WAN port numb ers are displa yed as h yperlin ks. Clic[...]

Port Information table 255 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 17 • S yst em Figure 140. G.SHDSL port information Port Information table If you have a Mode l 3096RC, go to section “G.SH DSL Port Informati on table”. Otherwise , for a Mod el 3196RC, go t o secti on “iDSL Port Information table” on page 256. G.SHDSL Po[...]

Port Information table 256 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 17 • S yst em Figure 141. iDSL port informati on iDSL Port Inform ation table The iDSL Port Inf orma tio n table (see figu re 140 ) disp lays st atus in forma tion in three catego ries: • Port —Clicking on the hyperl ink for eac h port displ ays the iDS L por[...]

System Status Details window 257 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 17 • S yst em Figure 142. Sy stem Status Details window Syst em Sta tus D etail s windo w Click on the Detailed S tatus … hyperlink to view the System Status Details window. The System Status Details window di splays the foll owing info rmation: • CPU S[...]

System Status Details window 258 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 17 • S yst em CPU Statis tics This portio n of the System Status Details window, show n in figure 1 42 on page 257, contains information describe d in the follow ing sectio ns. % CPU Idle (box Idletime) This indi cates w hat perce ntage of the CPU p rocessi[...]

System Status Details window 259 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 17 • S yst em Total Time Waited ( boxCountMsgBlkTaskWait) The total number of times that the proper si ze message block was not available to hold a packet, and the C PU task went to s leep whil e wait ing for it. Total Times Unavailable (boxCountMsgBlkUna v[...]

System Parameters window 260 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 17 • S yst em Figure 143. System Parameters window System Parameters window Clicking on the hyperlink System Parameters… displa ys the System Pa rameters windo w (see figure 143 ) which contains the following: • Insta ll ati on Pa ramet ers section • SNMP[...]

System Parameters window 261 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 17 • S yst em Running Since La st Boot (sysU pTime) This SNMP variable represents the ti me since the netwo rk management porti on of the system was last re - initial ize d. System M anager (sy sContact) This SNMP variable represents the tex tual identification[...]

System Parameters window 262 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 17 • S yst em Front Handle Reset (box HandleResetEnable) Selects whether unlocking the front handle w ill cause T-DACS to reset. • disabled( 0)—Unlock ing the front handle will not cause the T-DACS to res et • enabled(1)—Unlocking the front handle will [...]

System Parameters window 263 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 17 • S yst em Modi fy Paramete rs window The System Parameters Conf iguration window (see figur e 144 ) provides the m eans for you to modify the v alues for T-DA C Syste m config urable parameters in the SNM P and HTTP, and Installation tables. To display the [...]

System Parameters window 264 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 17 • S yst em • writeUs erlpWa n(114)—T he monito r user can change all p arameters —except password s— und er authenti- cation, drop-and-in sert, dial-in, IP, T1/E1, and Frame Relay links. • writeUs erlpWanSy stem(242 )—The m onitor user can c hang[...]

System History Overview win dow 265 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 17 • S yst em User Password Verificatio n (bo xSnm pVe rif yPa ssw ord ) This is verificati on for the password. It must be se t before replacin g the old pass word with the new one. System History Overview window The System History Ov erview window (s e[...]

System History Overview win dow 266 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 17 • S yst em The System History Over view window functions as a menu or portal to this i nform ation via t wo tab les o f hy per- links to related windows, as shown in figu re 146 . Figure 146 . System History diagram Click the System History hyperlink [...]

System History Overview win dow 267 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 17 • S yst em DSL Port Informatio n table If you have a Mode l 3096RC, go to sec tion “G.SHDSL port info rmation tab le”. Otherwis e, fo r a Model 3196RC, go t o secti on “iDSL port info rmation table” on page 267. G.SHDSL port informatio n table[...]

(WAN) Circuit ID # History of Near End Performance window 268 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 17 • S yst em (W AN) C ircuit ID # Histor y of Near End Per formance windo w The (WA N) Circuit ID # Hi story of Near End Perform ance win dow displa ys li ne st at istics per taining to the remote en d of the T1/E1 li nks. The [...]

(WAN) Circuit ID # History of Near End Performance window 269 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 17 • S yst em Severely Errored Fram e Seconds ( dsx1Inter valSEFSs) The number of severely error ed framing sec onds encountered by a DS1 interface in on e of the previou s 96, 15- minute intervals. Unavailable Seconds (dsx1Inte[...]

History of Near End Performa nce: G.SHDSL or iDSL Port window 270 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 17 • S yst em History of Near End Performance: G.SHDSL or iD SL Port window The History of Nea r End Perfo rmanc e: G.S HDSL or iDSL Port window di splays line statistics pertaining to the nea r end of a G.S HDS L/iD SL li n[...]

History of Near End Performa nce: G.SHDSL or iDSL Port window 271 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 17 • S yst em Severely Errored Seco nds (histor ySESgsh DSL) The number o f far- end s evere ly er rore d seco nds en count ered by a G. SHDSL in terf ace in o ne of the p revio us 96, 15-minu te intervals. Unavailab le Seco[...]

272 Chapter 18 Alar m Card Chapter cont ents Introd ucti on ................. ............ ................ ............ ........... ........... ............ ................. ........... ........ . ........ ........... .....273 Alarm C ard Statu s .................... ........... ........... ................. ........... ............ ........... .[...]

Introduction 273 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 18 • Alarm Card Intr oduction The Alarm Car d window (s ee figure 150 and fi gure 1 51 ) is where you can configure the al arm card polling mode to determ ine wheth er the T-D AC mon itors al arm card status. C lick on Alarm Card under the configura- tion menu to disp lay [...]

274 Chapter 19 System Log Chapter cont ents Introd ucti on ................. ............ ................ ............ ........... ........... ............ ................. ........... ........ . ........ ........... .....275 System Log Overview window .................. ............ ........... ........... ................. ............ ........[...]

Introduction 275 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 19 • S yst em Lo g Intr oduction The T-DA C software prov ides a system log utility. The sys tem log subs ystem generates an ev ent message for certain errors and signifi cant occurrences within th e T-DAC system . The T-DAC can store these sys tem log messages in memory, [...]

System Log Overview win dow 276 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 19 • S yst em Lo g The System L og main window pr ovides hype rlinks to the Sy stem Log (confi guration), System L og (volatile Memory ) and System L og (Non-Vol atile Memory ) windows, as shown in fig ure 153 . Figure 153 . System Log windows map You can us[...]

System Log Overview win dow 277 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 19 • S yst em Lo g • Non-V ola til e Me mor y—C lic kin g on th e Non-Vola tile Mem ory… link displays the System Log Messages in Non-Vola tile Mem ory window whe re you can view the syste m log messages curr ently stored in the T- DAC NVRAM. The Syste[...]

System Log Overview win dow 278 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 19 • S yst em Lo g Min Priority for Conso le RS-232 (syslogConsolePriority) System mess ages which have a priority eq ual to or greater than this setting w ill be sent directly to the RS-23 2 Config control port (RJ-45 connector labeled “Config”) on the [...]

System Log Overview win dow 279 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 19 • S yst em Lo g Min Priority for RAM (S yslogTablePriority) System messages wh ich have a pri ority equal to or greate r th an this setti ng will appear in System Log—V olatile Memory. T he lower the n umber ne xt to the p riority listed b elow, the m o[...]

System Log Configuration window 280 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 19 • S yst em Lo g • syslogFlashFul l(1)—When Flash i s rejecting system log mes sages because the mess age cache is full, the T- DAC will set the value of syslo gFlashClear(2) to s yslogFlashFull(1). To cor rect this conditi on by erasing the messag[...]

System Log Configuration window 281 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 19 • S yst em Lo g SysLog Daem on IP Addr ess(sy slogDaem onIP) The IP addr ess of a host comput er syste m which is ru nni ng a syslog daemon. System messages with a priority greater than or equal to the conf igurable syslogDaemonPr iority will be sent [...]

System Log Configuration window 282 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 19 • S yst em Lo g Min Priority for Flash Storage (s yslogFlashPriority) System mess ages which have a priority eq ual to or greater than this settin g will be permanently stored in the Flash PROM. Due to being permanen t memory, the Flash memory ev entu[...]

System Log Messages in Volatile Memory window 283 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 19 • S yst em Lo g Unix Facility (syslog UnixFacility) This setting is used when syslog messages are sent to a Unix-type syslog d aemon. In this cas e the message wi ll inclu de the f acili ty and pri ority coding. Call Trace (syslogCallTra[...]

System Log Messages in Non-Volatile Memory window 284 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 19 • S yst em Lo g System Log Messages in Non-V olatile Memor y window The System L og Messages in Non-Volatile Memory window ( see figure 158 ) displays the ti me-stamped system log messages cur rently stored in the T -DAC’s non-vol [...]

285 Chapter 20 T1/E 1 Link Chapter cont ents Introd ucti on ................. ............ ................ ............ ........... ........... ............ ................. ........... ........ . ........ ........... .....288 T1/E1 Link Act ivity Port s window ................. ........... ............ ................. ........... ........... .[...]

286 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 20 • T1/E1 Link Red Al arm Sever ity () ... ........... ........... ........... ............ ................. ........... ........... ........... ................. ........... 300 WAN Circuit Con figurat ion—Chann el Assignment ........................ ........... ............ .....[...]

287 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 20 • T1/E1 Link Path Code Violation s (dsx1FarEndC urrentPCVs) ..................... ........... ................. ........... ............ ........... .....307 Burst y Erro red Se conds (dsx1F arEn dCurre ntBE Ss) ............. ............ ................. ........... ........... ..[...]

Introduction 288 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 20 • T1/E1 Link Intr oduction T1/E1 Link Acti vity Overview wi ndow ( see f igure 159 ) provide s the means fo r you to ma nage the T1/E1 Link subsy stem. T he T1/E1 Link Activity Overview page provides a quick summary of all 4, 8, 12 or 16 WAN ports. For eac h of the T- D[...]

Introduction 289 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 20 • T1/E1 Link The T1/E1 Link Acti vity Overview wi ndow pr ovide s lin ks to t he wi ndow s shown in figur e 160 . Figure 160. T1/E1 Link Activity windows map The T 1/E1 Link Activity Overview mai n window contains the following items: • View Links 1–4 , View Links 5[...]

T1/E1 Link Activity Ports window 290 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 20 • T1/E1 Link • If an alarm or alarms are present for a specific WAN port, a hyperlink beside Line Status: will state Alarms Prese nt (see fi gure 161 ). T h e a ss o ci a t ed w eb p ag e ca l le d Ci r cu i t I D # Li n e S ta t u s A la r ms p o [...]

T1/E1 Link Activity Ports window 291 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 20 • T1/E1 Link • Ne ar End Lin e Stat istic s —Show erro r statistics collec ted from the near- end of the T1/E1 line. • Far End Line Statisti cs —Sho w stati stics c olle cted fr om the fa r-end T 1/E1 line. Far En d Line Sta tist ics ca n be [...]

Line Status (dsx1LineStatus) 292 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 20 • T1/E1 Link Line Status (dsx1LineStatus) This variable indicates interface line status. It contains loopback, failure, received alarm and transmitted alarm information. If any condition other than No Alarms exists , you can cli ck on the Alarm s Present[...]

Line Status (dsx1LineStatus) 293 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 20 • T1/E1 Link Near end or far end se nding AIS (Al arm Indication Sign al (AIS) Fail ure) The Alarm Indication Signal failur e is declared when an AI S defect is de tected at the in put and the AIS defect still exists af ter the Loss of Frame fai lure (wh[...]

Line Status (dsx1LineStatus) 294 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 20 • T1/E1 Link Far End Send ing TS16 LOMF (F ar End Loss of Multiframe Failur e) The Far End L oss of Multiframe failure is declared when bit 2 of TS16 of frame 0 is received set to one on tw o consec utive oc casion s. The F ar End Loss of Multif rame f a[...]

Line Status—Configuration 295 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 20 • T1/E1 Link Line St atus—C onfigura tion Clicking on th e Line Status—C onfiguration hyp erlink in the T1/E 1 Link Activ ity Ports page di splays the WAN Circuit Conf iguration hyperl ink page (see figur e 164 ). This page contains general informatio[...]

WAN Cir cuit Co nfigur ation —Modi fy 29 6 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 20 • T1/E1 Link V ali d Intervals (dsx1V alidIntervals) The numbe r of previou s intervals fo r which vali d data was collec ted. The value w ill be 96 unle ss the interfac e was br ought o n-lin e with in the last 24- hours , in wh ic h case th[...]

WAN Cir cuit Co nfigur ation —Modi fy 29 7 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 20 • T1/E1 Link Line Inter face Se ttings This portio n of the WAN Circuit Configuration window contains information described i n the fol lowing se ction s. Circuit ID (dsx1CircuitIdentifier) This variable con tains the transmission ve ndor’s[...]

WAN Cir cuit Co nfigur ation —Modi fy 29 8 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 20 • T1/E1 Link Receive Equalizer (linkRx Equalizer) This variab le determines th e equalization u sed on the rece ived signal. L ong haul signals should have th e equal- izati on set for mor e. Short haul signals requir e less equali zation. ?[...]

WAN Cir cuit Co nfigur ation —Modi fy 29 9 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 20 • T1/E1 Link • YellowForm atDL(2)—FF00 pattern in the Data Link • Yellow FormatFrame1 2FS(3)—FS bit of frame 12 FDL (ds x1FDL) This var iable de scri bes which i mplement ation of FDL is being used, if any. FDL applies only to T1 circ[...]

WAN Circ uit Conf igura tion—Ch annel Assi gnmen t 300 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 20 • T1/E1 Link • dsx1SendRese tCode(4)—Sendi ng a loopbac k termination r equest Error Injection (linkInje ctError) Force an output error to se e if the other e nd detects it • noEr rorInjection (0) • inject CRCerrorB urst( [...]

WAN Circ uit Conf igura tion—Ch annel Assi gnmen t 301 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 20 • T1/E1 Link To display the WAN Circuit Channel Assignment window: • Determin e which T1/E1 W AN circuit you wish to use fo r in-band management • Display the WAN Circuit Configuration Link page for your select ed T1/E1 link ?[...]

Near End Line Statistics—Curren t 302 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 20 • T1/E1 Link Near End Line Sta tistics—Curren t Click on Ne ar End Lin e Statistics—C urrent to display line st atistics for the curre nt 15-minute inter val (see figure 167 ). Figure 167. Current Near End Performance window Err ored Seconds ([...]

Near End Line Statistics—H istory 303 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 20 • T1/E1 Link Degraded Minutes (dsx1Curre ntDMs) The number of de graded minutes (DM s) encountered by a DS1 interface in the curr ent 15-minute interv al. Line Co de V iolation s (dsx1Cu rrentLCVs) The number of line code violations (LCVs) encount[...]

Near End Line Statistics—H istory 304 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 20 • T1/E1 Link Severely Errored Fram e Seconds ( dsx1Inter valSEFSs) The numbe r of severel y errored fram ing seconds encountered by a DS1 interfac e in one of the p revious 96, individ ual 15-minute , intervals. Unavailable Seconds (dsx1Inter valU[...]

Near End Line Statisti cs—Totals 305 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 20 • T1/E1 Link Near End Line Sta tistic s—T o tals Click on Near End Line Statist ics—Totals to display the total statistic s of errors that occ urred during t he previ- ous 24-h our peri od, the prev ious 96 15 -minute i ntervals ( see figure 16[...]

Far End Line Statistics—Current 306 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 20 • T1/E1 Link Degraded Minutes (dsx1T otalDMs) The numb er of deg raded minu tes ( DMs ) enc ounte red by a D S1 inte rfac e i n the prev ious 24-h our in ter val. Line Co de V iolation s (dsx1T otal LCVs) The number of line code violations (LCVs) en[...]

Far End Line Sta tistics—Histor y 307 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 20 • T1/E1 Link Line Errored Secon ds (dsx1Far EndCurren tLESs) The numbe r of far-end line er rored seco nds encounte red by a DS1 i nterface in the c urrent 15-minute i nterval Path Co de V iolation s (dsx1F arEndCu rrentPCVs) The numbe r of far-en[...]

Far End Line Sta tistics—Histor y 308 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 20 • T1/E1 Link Errored Seconds (dsx1FarEn dInterva lESs) The numbe r of far-end err ored seconds encountered by a D S1 interface in one of the p revious 96, ind ividual 15-min ute, int ervals . Severely Errored Second s (dsx1FarEnd Inter valSESs) Th[...]

Far End Line Statistics—Totals 309 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 20 • T1/E1 Link Far End Lin e Statistics —T otals Click on Far End Line Statistic s—Total s to display the total st atistics of errors that occurred during th e previous 24-ho ur peri od (se e figure 1 72 ). This is the s um of the cur rent 15-minu [...]

Far End Line Statistics—Totals 310 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 20 • T1/E1 Link Bursty Errored Seconds (dsx1F arEndT otalBES s) The numbe r of far-end b ursty errored s econds (BES s) encountered by a DS1 inter face in the prev ious 24- hour interval. Degra ded Mi nutes ( dsx1Far EndT otalDMs ) The num ber o f fa r-[...]

311 Chapter 21 Abou t Chapter cont ents Introd ucti on ................. ............ ................ ............ ........... ........... ............ ................. ........... ........ . ........ ........... .....312 Patt on Elect ronic s Comp any conta ct infor matio n ...................... ............ ........... ................. ......[...]

Introduction 312 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 21 • About Intr oduction The About li nk displays Patto n Electronics Co mpany contact information (see “P atton Electronics C ompany contact information”). Click on Abo ut under the T -DAC ’s Configur ation Menu to display the About main win- dow (see figure 17 3 ).[...]

313 Chapter 22 License Chapter cont ents Introd ucti on ................. ............ ................ ............ ........... ........... ............ ................. ........... ........ . ........ ........... .....314 End User License Agreement .................... ............ ........... ................. ........... ............ .........[...]

Introduction 314 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 22 • L icens e Intr oduction The Lice nse link presents the End U ser Licens e Ag reem ent for the T-DAC software. Clic k on License under the Configurati on Menu to display the License main windo w (see figure 174 ). Figure 174. License window By opening the T -DAC, opera[...]

End User Licens e Agreement 315 Models 2616RC, 3096RC & 319 6RC Admin Reference Guide 22 • L icens e 4. Grant of Lic ense: A) During the term of this Agreement, Patton E lectr onics Company grants a personal, non-transfer able, non- assignable and non-e xclusive license to th e End User to u se the Program(s) o nly with the Desi gnated Equip-[...]