Patton electronic USB инструкция обслуживания

USER MANUAL Model 2192/USB/V.92 USB Modem SALES OFFICE +1 (301) 975-1000 TECHNICAL SUPPOR T +1 (301) 975-1007 www .patton.com P ar t# 07M2192 Rev . A Doc# 09401U2-001 Revised 10/26/04 An ISO-9001 Cer tified Company[...]

2 CONTENTS 1.0 Compliance and Trademarks ..................................................... 3 1.1 FCC Notice ................................................................................... 3 1.2 FCC Requirement ......................................................................... 3 1.3 Trademark Acknowledgements .........................[...]

3 1.0 COMPLIANCE AND TRADEMARKS 1.1 FCC NOTICE This equipment has been tested and f ound to comply with the limits f or a Class B digital de vice, pursuant to P ar t 15 of FCC Rules. These limits are designed to provide reasonab le protection against har mful interference in a residential installation. This equipment generates, uses and can radi- a[...]

4 The REN is useful in determining the quantity of devices you ma y con- nect to your telephone line and still ha ve those entire de vices r ing when your telephone n umber is called. In most, but not all area, the sum of the RENs of all de vices connected to one line should not e xceed five (5). T o be cer tain of the number of de vices you ma y [...]

5 2.0 GENERAL INFORMATION Congratulations on y our purchase of this USB Modem. The Model 2192/USB/V .92 Modem f eatures the latest innovations in high speed modem design to make electronic comm unication f aster and easier , including V .92 compatibility . This man ual will show you how to install and properly use the modem in order to take full ad[...]

6 • Modem-on-Hold • V .44 Data Compression QuickConnect Allows y our modem to connect to the ISP f aster than bef ore . V er y simply , QuickConnect shortens the time it takes to make a connection b y remembering the phone line and ISP characteristics, then storing them f or later usage. QuickConnect cuts the modem handshake time in half f or m[...]

7 3.0 INSTALLATION This chapter contains the f ollowing sections that describe installing the modem driver software: • Section 3.1, “Setting Up the Modem in Windows 98” on page 7 • Section 3.2, “Setting Up the Modem in Windows ME” on page 11 • Section , “Congratulations! The modem is installed. ” on page 12 • Section , “Congra[...]

8 1. Inser t the CD into your CD-R OM and the system will e x ecute the setup.exe automatically . The Modem Installation window (see Figure 2) will appear . Click to begin installing the modem driver . Figure 2. Modem Installation window 2. When the Setup Complete message displa ys (see Figure 3), Click . Figure 3. Modem Installation window—Setup[...]

9 3. Connect one end of the USB cable supplied with the modem to the USB por t on the modem (see Figure 4). Figure 4. USB por t location 4. Connect the other end of the cable to one of the PC’ s USB por ts. The por t is usually labeled with the symbol shown in Figure 5. Figure 5. USB symbol[...]

10 5. Plug one end of the RJ-11 cable supplied with the modem into the RJ-11 jack (see Figure 6). Figure 6. RJ-11 por t location 6. Plug the other end of the RJ-11 cable into the modular jac k on the wall outlet or optional T adapter. 7. V erify that the red POWER LED on the modem (see Figure 7) is lit. Figure 7. Model 2192 LEDs[...]

11 8. Windows 98 detects the USB modem automatically and displa ys the message Add New Hardw are Wizard , click Next to continue (see Figure 8). Figure 8. Add New Hardware Wizard window Congratulations! The modem is installed. 3.2 SETTING UP THE MODEM IN WINDOWS ME This section describes how to install your Model 2192 USB modem in Windows . When in[...]

12 5. Plug one end of the RJ-11 cable supplied with the modem into the RJ-11 jack (see Figure 6 on page 10). 6. Plug the other end of the RJ-11 cable into the modular jac k on the wall outlet or optional T adapter. 7. V erify that the red POWER LED on the modem (see Figure 7 on page 10) is lit. 8. Windows ME detects the USB modem automatically and [...]

13 3. Plug one end of the RJ-11 cable supplied with the modem into the RJ-11 jack (see Figure 6 on page 10). 4. Plug the other end of the RJ-11 cable into the modular jac k on the wall outlet or optional T adapter. 5. V erify that the red POWER LED on the modem (see Figure 7 on page 10) is lit. 6. Windows 2000 detects the USB modem automatically an[...]

14 Note The connection diagram in Figure 1 on page 7 includes an optional RJ-11 modular T adapter so the USB modem and a telephone can share the same telephone wall jac k. If y ou will not be sharing the wall jack, it is not necessary to install a T adapter . 1. Connect one end of the USB cable supplied with the modem to the USB por t on the modem [...]

15 7. Inser t the CD into your CD-R OM and the system will e x ecute the setup.exe automatically . The Modem Installation window (see Figure 2 on page 8) will appear . Click to begin installing the modem driver . 8. When the Setup Complete message displa ys (see Figure 3 on page 8), Click . Congratulations! The modem is installed.[...]

16 4.0 SETTING UP AND USING MODEM-ON-HOLD The modem-on-hold f eature requires the f ollowing: • Internet ser vice from an ISP that suppor ts V .92—V er ify that your ISP suppor ts V .92 MOH. Be sure to ask how long an Internet call can be left on hold bef ore your Internet session will be disconnected. • Extra services from your local phone c[...]

17 The Smar tUSB56 V oice Modem Proper ties control panel displays (see Figure 13). Figure 13. V .92 Features panel 2. Click the Modem on Hold tab (see Figure 13). V erify that the Enable Incoming Modem on Hold bo x is check ed (see Figure 14). Figure 14. Modem on Hold panel[...]

18 3. Select what you w ant the modem to do when a phone call is received while y ou’ re online (see Figure 14 on page 17). 4. Click the OK button to sa ve changes and close the control panel. Selecting the country/area 1. Left mouse click on Star t > Settings > Control P anel > Modem Set- tings (see Figure 15). Figure 15. Selecting the [...]

19 3. Select the countr y or area where the 2192 Modem is installed by selecting from the Countr y/Area pop-up menu (see Figure 16). Figure 16. Configuration panel Enabling the speaker (optional) 1. Click on the Speak er tab (see Figure 17). Y ou can choose to enable your PC speak ers to play sounds representing activities of the modem. The modem [...]

20 2. Click on the Soft Speaker > Enab led bo x so a check mark appears. 3. Mov e the speaker volume slider (see Figure 17 on page 19) to the desired setting. 4.2 CONNECTING AND LOGGING ONTO YOUR ISP Connect to your ISP as usual. After connecting, you will see an icon in the system tra y (see Figure 18), indicating that the modem is online. Figu[...]

21 Making an outgoing call while online 1. T o make an outgoing call while online , click on the icon in the system tra y , the Smar tUSB56 V oice Modem panel displays (see Figure 19) Figure 19. Smar tUSB56 V oice Modem panel 2. Select the Modem On Hold tab (see Figure 19). 3. Click on the Make a Phone Call button (see Figure 19). Figure 20. Making[...]

22 Note Y our ISP controls how long the Internet connection can be on hold. 5. When your call is complete, clic k on the Resume m y Internet Con- nection button (see Figure 20 on page 21). While y our Inter net connection is resuming, you will see the Resuming Y our Inter net Connection window (see Figure 21). Figure 21. Resuming Y our Internet Con[...]

23 nection (see Figure 22). Y ou will also hear a r inging sound if you hav e configured the Modem Settings control panel to hav e Soft Speaker enabled. Figure 22. Receiving Phone Call window 3. If you choose to ans wer the call, the Receiving Phone Call window changes to show the Remaining hold time timer (see Figure 23). Figure 23. Receiving Pho[...]

24 Note If you do not finish y our call bef ore the timer expires , y our voice call will automatically be disconnected and you ma y also lose your Internet connection. T o av oid this , there are tw o w orkarounds: • Ask the person to whom you are speaking to hang up bef ore the timer expires and call y ou back in a minute. Then resume your Int[...]

25 5.0 DIAGNOSTICS 5.1 WINDOWS 98/ME 1. Select Star t > Settings >Control P anels . Then double-clic k on the Modems icon. 2. Click on the Diagnostics tab . 3. Select the COM P ort that the modem is using and click on the More Inf o… button to start the test. 4. If your modem is responding to A T commands correctly , it means that your mode[...]

26 Notes _________________________________________________________ _________________________________________________________ _________________________________________________________ _________________________________________________________ _________________________________________________________ ___________________________________________________[...]

27 Notes _________________________________________________________ _________________________________________________________ _________________________________________________________ _________________________________________________________ _________________________________________________________ ___________________________________________________[...]

28 Notes _________________________________________________________ _________________________________________________________ _________________________________________________________ _________________________________________________________ _________________________________________________________ ___________________________________________________[...]