Peavey Supreme инструкция обслуживания

TRAN8TUB~~ ~G-;u~x;EsP Amp Hea d OPERATING GLHDE[...]

A Intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. A Intended to alert the user of the presence of important operating and maintenance (servicing) instructions in the literature accompanying the pr[...]

Congratulations on your purchase of the all new Supreme TM TransTube@ Series. This amp represents years of research on vacuum tube emulation, resulting in a totally new Supreme. The preamp has been rede- signed, using patent-applied for technology that redefines tubelike distortion and harmonic generation in solid-state amps. The new T. Dynamics ci[...]

EFFECTS SEND (8) Output for supplying signals to external low-level effects or signal processing equipment. REVERB LEVEL (9) Controls the overall reverb level. POST GAIN (10) Controls the overall volume level of the Lead channel. The final level adjustment should be made after the desired sound has been achieved. LOW, MID, & HIGH EQ (11,15) Pas[...]

Back Panel: BACK PANEL FEATURES EXTERNAL SPEAKER JACKS (21) A Provided for connection of external speaker cabinet. Minimum external speaker impedance is 8 ohms (4 ohm total impedance). IMPEDANCE SELECTOR SWITCH (22) Used to select the appropriate impedance of the speaker enclosure(s). If two enclosures of equal impedance are used, the switch should[...]

Rated Power & Load: Power specs measured with T. Dynamics @ 10% 100 W RMS into 16, 8, or 4 ohms Power @ Clipping: (typically) (5% THD, 1 kHz, 120 V AC line) 100 W RMS into 16, 8, or 4 ohms Frequency Response: +O, 3 dB, 60 Hz to 20 kHz, @80WRMS Hum & Noise: Greater than 86 dB below rated power Power Consumption: Domestic: 300 W @ 60 Hz, 120 [...]

Flowchart LEAD INPUT HIGH GAIN AMP VOICING ; ; ; y T EFX, &%HBYpASS SWITCH 0 * LOGIC PUSH THRASH P 9 SEND x RETURN RESONANCE SWITCH CLEAN IMPEDANCE SWITCH I T.DYNAMICS Tone Settings EFX POWER m, - - LOOP - HI~VI’RB ,.LAD Cl.liAN - INPU’IS - “OUT” “OllT” AD.,I’Li, T O MEDIUM DISTORTION PREPLRtNCE JAZ Z[...]

Consulte 10s diagramas de1 panel delantero en la seccih de ingl6s de este manual. Felicitaciones por la adquisicion del nuevo miembro de la serie TransTube@, el amplificador SupremeTM. Este novisimo amplificador representa aRos de investigation en el campo de la emulation del sonido generado por 10s tubos de vacio. El preamplificador ha sido redise[...]

REVERB LEVEL (Nivel de reverberation) (9) Controla el nivel global de la reverberation. POST GAIN (Control de ganancia posterior del preamplificador) (10) Controla el volumen general del canal solista. El ajuste final de nivel debe hacerse despues de que se haya obtenido el sonido deseado. LOW, MID, & HIGH EQ (Ecualizador de frecuencias graves,[...]

Tablero Trasero: EXTERNAL SPEAKER JACKS (Enchufes hembra de altavoz externo) (21) A Se suministra para la conexion de bafles externos. La impedancia minima del altavoz externo es de 8 ohms (4 ohms de impedancia total). IMPEDANCE SELECTOR SWITCH (Interruptor del selector de impedancia) (22) Se usa para seleccionar la impedancia adecuada para la(s) c[...]

Veuillez vous r6f6rer au “front panel line art” situ6 dans la section en langue anglaise de ce manuel. Felicitations pour votre achat du Supreme TM TransTube@ nouvelle serie. Cet amplificateur, entierement novateur, est le fruit d’annees de recherche sur I’emulation de tube a vide. La nouvelle conception du preamplificateur s’appuie sur u[...]

REVERB LEVEL (Niveau de reverberation) (9) Controle le niveau de reverberation global. POST GAIN (10) Commande le volume general du canal “Lead”. Le reglage final de niveau doit etre effectue apres avoir obtenu la sonorite dosiree a I’aide des autres reglages. LOW, MID, & HIGH EQ (egalisation graves, moyennes et aigu&) (11, 15) Reglag[...]

Panneau Arriere: EXTERNAL SPEAKER JACKS (Prises pour haut-parleur externe) (21) A Sortie pour branchement d’une enceinte de haut-parleur separee. Impedance de haut- parleur externe minimale : 8 ohms (impedance totale de 4 ohms). IMPEDANCE SELECTOR SWITCH (Interrupteur de selection d’impedance) (22) Sert a selectionner I’impedance appropriee p[...]

Siehe Diagramm der Frontplatte im englischen Teil des Handbuchs. Wir begluckwunschen Sie zum Erwerb dieses Verstarkers aus der neuen SupremeTM Serie. Der neue Supreme ist das Ergebnis langjahriger Forschungsarbeit auf dem Gebiet der Hochvakuumrohrenemulation. Dieser Vorverstarker wurde unter Zuhilfenahme einer zum Patent angemeldeten Technologie ko[...]

POST GAIN (10) Regelt die Gesamtlautstarke das “Lead”-Kanal. Die endgiiltige Lautstarkeeinstellung sollte erst dann vorgenommen werden, wenn der gewunschte Klang erreicht ist. LOW, MID, & HIGH EQ (Tiefen, Mittleren und htihen-equalizerregler) (11,15) Hierbei handelt es sich urn passive Klangregler, die tiefe, mittlere und hohe Frequenzen en[...]

Riickplatte: 0 26 EXTERNAL SPEAKER JACKS (Buchsen fur externe lautsprecher) (21) A AnschluObuchse fur einen zusatzlichen Lautsprecher. Die Mindestimpedanz fur externe Lautsprecher betragt 8 Ohm (4 Ohm Gesamtimpedanz). IMPEDANCE SELECTOR SWITCH (Impedanz-Wahlschalter) (22) Dient zur Wahl der passenden lmpedanz fur den oder die Lautsprecher. Wenn zwe[...]

For further information on other Peavey products, ask your Authorized Peavey Dealer for the appropriate Peavey catalog/publication: A 0 Bass Guitars Guitar s Bass Amplification Guitar Amplification Sound Reinforcement Enclosures Microphones Keyboards DJ Lighting Mixers, Powered/Non-Powered Accessories/Cables Effects Processors Axcess’” Wear The[...]

THIS LIMITED WARRANTY VALID ONLY WHEN PURCHASED AND REGISTERED IN THE UNITED STATES OR CANADA. ALL EXPORTED PRODUCTS ARE SUBJECT TO WARRANTY AND SERVICES TO BE SPECIFIED AND PROVIDED BY THE AUTHORIZED DISTRIBUTOR FOR EACH COUNTRY. Ces clauses de garantie ne sont vaiables qu’aux Etats-Unis et au Canada. Dans tour les autres pays, les clauses de ga[...]

IMPORTANT SAFETY INSTRUCTIONS WARNING: When using electric products, basic cautions should always be followed, including the following. 1. Read all safety and operating instructions before using this product. 2. All safety and operating instructions should be retained for future reference. 3. Obey all cautions in the operating instructions and on t[...]

Features and specifications subject to change without notice. Peavey Electronics Corporation 711 A Street / Meridian, MS 39301 / U.S.A. / (601) 483-5365 / Fax 486-1278 01996 #I80300272 Printed in U.S.A. l/96[...]