Pentax 16961 инструкция обслуживания

/ Digital Camera Operating Manual To ensure the be st performanc e fro m your camera, please read the Operating Manual before using th e camera. HOYA CORPORATION PENTAX Imaging Systems Division 2-35-7, Maeno-cho, Itabashi-ku, Tokyo 174-8639, JAPAN (http://www.pent ax.jp) PENTAX Europe Imagi ng Systems S.A.S. (European Hea dquarters) 112 Quai de Bez[...]

Memo Thank you for purchasing this PENTAX Digital Camera. Please read this manual befo re using the camera in order to get the most out of all the features and functions. Keep this manual safe, as it can be a valuable tool in helping you to unde rstand all the came ra’s capabilities. Regarding copyrights Images taken using the PENTAX Digital Came[...]

1 To users of this camera • Do not use or store this device in the vicinity of equipment that generat es strong electromagnetic radiati on or magnetic fields. Strong static charges or the magnetic fields produced by equipment such as radio transmitters could interf ere with the monitor, damage the stored data, o r affect the product’s internal [...]

2 Warning • Do not attempt to take the camera apart or modify the camera. High voltages are present withi n the camera, and there is a danger of ele ctric shock if the camera is taken apart. • If the inside of the camera shoul d become exposed as a result of, fo r example, the camera being dropp ed, please do not under any circumstances touch s[...]

3 Warning • Always use the battery charger and AC adapter exclusi vely developed for this product, wi th the specifi ed power and voltage. Us ing a battery charger or AC adapter not exclusive to th is product, or using the exclu sive battery charger or AC adapter with an unspeci fi ed power or voltage can cause a fire, electric shock, or came ra [...]

4 • To reduce the risk of hazard s, use only a CSA/UL certified power supply cord set, cord is Type SPT-2 or heavier, minimum NO.18 AWG co pper, one end with a molded-on male attachment plu g cap (with a specified NEMA configuration) , and the other is provided with a molded-on female connector body (with a specified IEC nonindustrial ty pe confi[...]

5 Warning • Be sure to keep t he camera and it s accessories out of the reach of small children. 1. Injuries may res ult from the product fallin g or from unexp ected movement. 2. Suffocation may result from wra pping the strap around the neck. 3. Small accessories such as battery or an SD Memory Card may be swallowed. Seek medical atten tion imm[...]

6 • Hot and humid places should be avoided. Particular care should be taken regarding vehicles, which can become very hot inside. • Ensure that the camera is not subjec ted to substantial vibrations, shocks, or pressure as this may cause damage, malfunction, or a loss in waterproof performance. Place the camera on a cushio n for protection when[...]

7 • Avoid storing the camera wh ere pesticides and chemicals are handl ed. Remove the camera from i ts case and store it in a well-vent ilated place to prevent the camera from becoming mol dy during storage. • Periodic checks are recommended eve ry 1 to 2 years in order to maintain high performance. • Refer to “Precautions When Using an SD [...]

8 Regarding Waterpro of, Dustproof, and Shockproof Design • This camera is prov ided with a wat erproof/dustproof desi gn complying wi th JIS waterproof grade 8 and JIS dustproof grade 6 (equi valent to IP68). • The camera satisfies the PENTAX drop test (1. 5 m height onto a 5 cm thick plywood surface) comply ing with MIL-Standard 810F Method 5[...]

9 • Close the battery/card and termina l covers properly until t hey click. Otherwise wate r may get in and damage the camera . • Avoid opening the battery/ card and terminal covers when near th e waterside or with wet hands. Wait until the camera is compl etely dry before changing the battery or the SD Memory Card. Avoid changi ng the battery [...]

10 • Do not open the battery/ card cover or terminal cove r if the camera is wet. Wipe off any water with a clean lint -free cloth. • The inside surface of the covers may get wet when they are opened. Wipe off any water that is on the cover. • Wiping off the camera whil e there is sand or dust on it may scratch the surface of the camera. Make[...]

11 Using Your Camera Safely ............................................................... 1 Care to be Taken During Handling ................................................... 5 Regarding Waterproof, Dustproo f, and Shockproof Design ............ 8 Precautions Before Using the Camera in the Water ......................... 8 Precautions When Usin[...]

12 Taking Pictures 73 Taking Still Pictures ............................................................. ............... 74 Taking Pictures ............................................................................... 74 Setting the Shooting Mode ............................................................. 78 Using the Face Detection Function .[...]

13 Setting the Instant Review ............................................................ 139 Setting the Green Button .............................................................. 139 Setting the Image Sharpness (Sharpness) ...................... ............. 143 Setting the Saturation/Tone Adjustment ....................................... 144[...]

14 Editing and Printing Images 187 Editing Images .................................................................................. 188 Changing the Image Size (Resize) ............................................... 188 Cropping Images .......................................................................... 189 Processing Images to Make Faces L[...]

15 Setting Auto Power Off ................................................................. 250 Setting the Quick Zoom Function ................................................. 251 Setting the Guide Display ............................................................. 252 Perform Pixel Mapping ......................................................[...]

16 In this manual, the method for operat ing the four-w ay controller is shown in illustrations, such as in the one below. The meanings of the symbols used in this Operating Manual are explained below. 1 Indicate s the referen ce page number for an explana tion of the related op eration. Indicates i nformation that is useful t o know. Indicate s pr[...]

17 This Operating Manual contains the followi ng chapters. Composition of the Operating Manual 1 Getting Started –––––––––– ––––––––––––––––– –––––––––––––– This chapter e xplains what you need to do after purchasin g the camera before you start t aking pictures. Be s[...]

18 Camera Features In addition to basic pictu re-taking, this camera has a varie ty of shooting modes to suit different situatio ns. Th is section describes how to make the most of the key features of your camera. For detai ls on how to operate the camera, look at the tab le of contents or in the in dex for specific functi ons. This camera is both [...]

19 The user-friendly design of the camera enables easy operation with only a fe w buttons. Simp ly by choosing the approp riate icon, you can select the shooting mode (p.79) and choose the optimal settings for the sit uation, or th e playback mo de (p.168) and enjo y the various playback and editing functions. A guide on the display lets you check [...]

20 This camera comes with a “Face Detect ion” function that spots the faces in your shot and automatically ad justs the focus and exposure for the faces. It can recognize up to 32 people per shot (*1), so it will help you take perfect group shots too. It auto matically releases the shutter when people are smiling, and if anyo ne blinks, it tell[...]

21 This camera has a variety of functions to let you enjoy playing back and editing images wi thout having to connect the camera to your computer and tran sfer the images first. The camera is all you need to take and edit still pictures and movies (p.188). A Multitude of Functions inside the Camera for Enjoying Images Without a Computer! Resize (p.[...]

22 Items marked with an asterisk (*) are also available as optional accessories. The battery charger and AC plug cor d are on ly sold as a set (battery charger kit K-BC92). For other optional accessories, refe r to “Optional Accessories” (p.297). Checking the Contents of the Package Camera Optio WG-1 GPS/ Optio WG-1 Strap O-ST104 (*) Carabiner [...]

23 Front Back Names of Parts Shutter release button Lens (with guard glass) Power switch/Power lamp (green) Flash Speaker/ Microphone Self timer lamp/ Focus assist Remote control receiver Macro light Display Tripod socket Battery/card cover PC/AV terminal Battery lock lever Terminal cover lock lever HDMI terminal Terminal cover Battery/card cover l[...]

24 Names of Operating Parts Refer to “Understanding the Button Functions” (p.60 - 63) for an explanation of the function of each button. Macro stand Attaching the supplied macro stand (O-MS1) reduces camera shake during shooting in Digital Microscope mode (p. 99). Insert two clips above and below the macro lights part. When attaching and detach[...]

25 The display changes in the followi ng sequence each time you press th e 4 / W button: “Normal Display”, “Histo gram + Info”, “No Info”, “LCD Off”. Monitor Indications Display in A Mode • All the camera buttons function as normal even when the LCD is off. Press the shutter release button to take pictur es as normal. • Y appear[...]

26 Normal Display in Still Picture Captur e Mode * 6 and 7 are only displayed w hen the shutter re lease button is pressed half-way. * For 8, M is displayed when Pixe l Track SR is set to O (On) on the [ A Rec. Mode] menu. f is displayed when the shut ter release button is pressed halfway i f Pixel Track SR is set to P (Off) and there is a danger o[...]

27 * 14 changes as follo ws depending on the [Eye-Fi ] setting in [ W Setting] menu. During Eye-Fi communication. The camera is communicatin g or searching for the access point when [Eye-Fi] is set to O (on). Eye-Fi communication waiting . T he camera is not communicating when [Eye-Fi] is set to O (on). Eye-Fi communication prohibited . [Eye-Fi] is[...]

28 Histogram + Info/No Info Displa y in Still Pictu re Capture Mode A1 to A21 and B3 appear when “Hi stogram + Info” is selected. Only B3 appears when “No Info ” is selected. *F o r A 6 , M is displayed when Pixel Track SR is set to O (On) on the [ A Rec. Mode] menu. f is displayed when the shut ter release button is pressed halfway i f Pix[...]

29 * A12 changes as follows dependi ng on the [Eye-Fi] setting in [ W Setting] menu. During Eye-Fi communication. The camera is communicatin g or searching for the access point when [Eye-Fi] is set to O (on). Eye-Fi communication waiting . T he camera is not communicating when [Eye-Fi] is set to O (on). Eye-Fi communication prohibited . [Eye-Fi] is[...]

30 * When there is an area on the scre en that i s overexposed it ap pears white, the indica ted area blinks red as a warnin g. Similarly, when there is an area that is underexposed it a ppears black, the indicated a rea blinks yellow as a warning. The display shows the shooting info rmation of the image in the playback mode. The display changes in[...]

31 Histogram + Info Display in Playback Mode (All of the display items are d isplayed here for explana tory purposes.) The display shows information such as the sh ooting condi tions. A1 to A11 also appear when “Normal Displa y” is selected. B1 to B8 appear only when “Histogram + Info” is selected. * A1 appears only if the Face Detect ion f[...]

32 * A11 appears only when the volume is bein g adjusted during playback of movies, sounds, or voice memos (p.163, p.2 24, p.227). * When “Normal Display” is se lected, the current date and time app ears for two seconds in the B4 to B8 positions. * When there is an area on the scre en that i s overexposed it ap pears white, the indicated area b[...]

33 A guide for each available button opera tion appears as follows on the display during operation. A histogram shows the brightness distribution of an image. The horizontal axis represents brightness (dark at the left and bright at the right) and the vertica l axis represents the number of pixels. The shape of the histogram before and after shooti[...]

34 When the image is underexposed, the part to the left is cut off (dark portions) and whe n the image is over exposed, the part to the right is cut off (bright portions). This camera has a function where overexposed areas are i ndicated as blinking red and underexposed areas a s blinking yellow. Understanding Con trast The graph peaks gradually fo[...]

1 Getting Started Attaching the Strap ........ ................ ........... 36 Powering the Camera ...... .............. ........... 38 Installing the SD Memory Card ................ 45 Turning the Camera On and Off .............. 49 Initial Settings .. .............................. ........... 51[...]

36 Getting Started 1 Attaching the Strap Attach the strap (O-ST104) supplied with the came ra. 1 Pass the narrow end of the strap through t he strap lug. 2 Pass the other end of the stra p through the loop and pull tight. Attach the carabine r strap (O-ST117/O-ST118) supp lied with the camera . 1 Pass the narrow end of t he strap through the s trap[...]

37 1 Getting Started Protecti ve rubber ri ng The carabiner has rubber rings to prevent damage to the display. These rubber rings cushion the impact when the carabiner hit s the display. Be sure to adjust the position of the rubbe r rings as shown in the figure below for the best results before using the carabiner strap.[...]

38 Getting Started 1 Powering the Camera Use the supplied battery charger (D -BC92) to charge the suppl ied rechargeable lithium-ion battery (D-LI92) before using it in the camera for the first time or after a long period of non-use, or when the [Battery depleted] message appears. Note: AC plu g cord “Listed, Type SPT-2 or NISPT-2, 18/2 flexible [...]

39 1 Getting Started Use the rechargeable l ithium-ion batter y D-LI92 that is provided with the camera. Charge the batte ry before usin g it in the camera for the first time. 1 Open the b attery/card co ver. Press the battery/c ard cover lock lever in t he direction shown 1 , s lide the cover toward s 2 and open it towards 3 . • Do not charge ba[...]

40 1 Getting Started 2 Using the side of the battery to pre ss the battery lock lever in the direction of 4 , inser t the battery with the PENTAX logo pointing toward the lens. Push the battery in un til it is locked in pl ace. 3 Close the battery/ca rd cover. While lightly pressing the battery/card cover in the opposi te direction indicated by 2 ,[...]

41 1 Getting Started • Do not u se excessive force when sliding the battery/card cover open and closed because the waterproof packing may peel off. If the packing is not in the correct position, the camera will not be wa terproof. • If the batt ery/card cover is not locked securely when you close it, water, sand, or dirt may get into the camera[...]

42 1 Getting Started • Ima ge Storage Capacity, Mo vie Reco rding Time , Sound Recording Time, and Playba ck Time (at 23°C or 73.4°F with the dis play on and the battery f ully charged) *1 Recording capacity shows appro ximate number of shots recorded during CIPA-compliant testing (with d isplay on, flash used for 50% of the shots, and 23°C or[...]

43 1 Getting Started Use of the optional AC adapter kit (K-AC117) is recomme nded if you intend to use the camera for a lon g time or connect it to a computer. 1 Make sure that the ca mera is turned off and open the battery/card cover . 2 Remove the Battery. Refer to p.39 - p. 40 on how to open the batt ery/card cover and remove the battery. 3 Inse[...]

44 1 Getting Started • Make sur e that the camera is turned off before connecting or disconnecting the AC adapter. • Make sur e that the AC plug cord and the DC terminal connecting th e AC adapter to the camera are inserted securely. Data may be lost if either becomes disconnected while dat a is being recorded o n the SD Memory Card or the buil[...]

45 1 Getting Started Installing the SD Memory Card This camera uses SD Memory Cards, SDHC Memory Cards or SDXC Memory Cards. (These cards ar e referred to as SD Memory Cards hereafter.) Captured images an d sound files are saved on the SD Memory Card if a card is inserted in the camera. They are saved in the built-in memory if a card is not inserte[...]

46 1 Getting Started 1 Open the b attery/card co ver. Press the battery/c ard cover lock lever in t he direction shown 1 , s lide the cover toward s 2 and open it towards 3 . 2 Insert the SD Memory Card into the SD Memory Card socket so that th e label is facing toward the front of th e camera (the side with t he lens). Push the card in al l the wa[...]

47 1 Getting Started Precaution s When Usin g an SD Mem ory Card • The SD Memor y Card is equipped with a write-protect switch. Setting the switch to LOCK prevents new data from being recorded on the card, the stored da ta from being deleted, and the card from being formatted by the camera or a computer. r appears on the display w hen the card is[...]

48 1 Getting Started The size of a recorded image differs depending on the number of recorded pixels of the images. This affects the number of images that can be saved on an SD Memory Card. Choose the appropriate numbe r of record ed pixels for still pi ctures on the [ A Rec. Mode] menu. Choose the appropriate number of reco rded pixels and frame r[...]

49 1 Getting Started Turning the Camera On and Off 1 Press the power switch. The camera turns on and both th e power lamp and display turn on. If the [Language/ ] screen or [Date Adjustm ent] screen appears when you turn the camera on , follow the procedure on p .51 to set the display language and/or cu rrent date and time. 2 Press the power switch[...]

50 1 Getting Started Use this function when you want to play back images or sound files straightaway without taking any pictures. 1 Press the power switch wh ile holding down the Q button. The display turns on and the came ra starts up in playback mode. Starting-up in the Playback Mode To switch from Playback Mode to A mode, press the Q button or p[...]

51 1 Getting Started Initial Settings The [Language/ ] screen appears when the camera is turned on for the first time. Perform the operations in “Setting the Display Langu age” below to set the language, and in “Setting the Date and Time” (p.55) to set the current date and time. 1 Use the four-way controller ( 2345 ) to c hoose th e display[...]

52 1 Getting Started 2 Press the 4 button. The [Initial Se tting] screen appe ars in the selected languag e. If the desired settings for [Homet own] and [DST] (Daylight Saving Time) appear, proceed to Step 3. Proceed to “To Set Hometown and DST” (p.54) if the desired settin gs do not appear. 3 Press the four-way contr oller ( 3 ) twice to selec[...]

53 1 Getting Started If you accidentally select the wrong language and g o to the next procedure, perform the following operation to set the language ba ck. When the Wrong Langua ge Has Been Inadvertent ly Selected 1 Press the four-way contr oller ( 5 ). 2 Use the four-way controller ( 2345 ) to select the language and press the 4 but ton. The [Ini[...]

54 1 Getting Started 3 Press the four-way contr oller ( 3 ). The frame move s to [ W Hometown]. 4 Press the four-way contr oller ( 5 ). The [ W Hometo wn] screen appears . 5 Use the four-way controller ( 45 ) to choos e a city. 6 Press the four-way contr oller ( 3 ). The frame moves t o [DST] (Daylight Savi ng Time). 7 Use the four-way controller ([...]

55 1 Getting Started Set the current date and time and the display fo rmat. 1 Press the four-way contr oller ( 5 ). The frame move s to [mm/dd/yy]. 2 Use the four-way controller ( 23 ) to choos e the date and time display format. Choose from [mm/dd/ yy], [dd/mm/y y] or [yy/mm/dd]. 3 Press the four-way contr oller ( 5 ). The frame move s to [24h]. 4[...]

56 1 Getting Started 6 Press the four-way contr oller ( 3 ). The frame move s to [Date]. 7 Press the four-way contr oller ( 5 ). The frame moves to the month. 8 Use the four-way controller ( 23 ) to change t he month. Change the day and year in the same manner. Next, change the time. If you selected [12h] in st ep 4, the setting switches betwe en a[...]

57 1 Getting Started [Language/ ], [Date], [Time], [Hometown] and [DST] can be changed. Refer to the pages below for instructions. • To chan ge the language, follow the steps in “Changing the Display Language” ( 1 p.241). • To change the da te and time, follow the steps in “Changing the Date and Time” ( 1 p.233). • To change the city [...]

Memo 58[...]

2 Common Operations Understanding the Button Functions ..... 60 Setting the Camera Functi ons ................. 65[...]

60 2 Common Operations Understanding the Button Functions 1 Power switch Turns the camera on and off (p. 49). 2 Shutter release button Focuses the camera on the subjec t when pressed halfway in Still Picture Capture Mode (e xcept when the focus mode is set to 3 , s , and ) (p.75). Takes a still picture when pressed down fully (p.75). Pressing dow[...]

61 2 Common Operations 6 I button Switches the Face Detection func tion (p.80). The Face Dete ction function is switched as follows each time the I butt on is pressed: Smile Capture ´ Self-portrait Assist ´ Self-portrait Assist + Smile Capture ´ Face Detection Off ´ Face Dete ction On Selects or regis ters a pet in e (Pet) mode. 7 Four-way cont[...]

62 2 Common Operations 1 Power switch Turns the camera on and off (p. 49). 2 Shutter release button Switches to A mode (p.64). 3 f / y button In single-image display, pressi ng f switches to 6-image d isplay. Pressing f ag ain switches to 12-image d isplay (p.164). Press y to return to the previous display. In single-image display, pressi ng y enla[...]

63 2 Common Operations Changes to 12-ima ge display of the selected fo lder during folder dis play (p.166). Changes to 12-image display of t he selected da te during ca lendar display (p.166). 6 I button Zooms up on the subjects’ f aces in the order in which they were recognized during shooting (Face close-up playback) (p.174). 7 Four-way control[...]

64 2 Common Operations In this manual, the capture mode, such as fo r taking still pictures, is referred to as “ A mode” (the capture mode). The playback mode , such as for displ aying captur ed images o n the monit or, is referred t o as “ Q mode” (the playback mode). In Q mode, you can perform simple editing operations on the i mages that[...]

65 2 Common Operations Setting the Camera Functions To change the came ra settings, press the 3 button to display the [ A Rec. Mode] menu or [ W Setting] menu. Function s for playing back and editing images an d sound files are displayed from the Playback Mode Palette. Press the 3 button in A mode to display the [ A Rec. Mode] men u. Press the 3 bu[...]

66 2 Common Operations Available button operations appear on the display during menu operation. 38 100 100 - 0038 0038 100 - 0038 38 100 100 - 0038 0038 100 - 0038 1/4 AW B MENU 14 M 1/4 AW B MENU 14 M 1/4 MENU 1/4 MENU P P Edit Rec. Mode Recorded Pixels Image T one Quality Level White Balance AE Metering AF Setting Bright Exit Rec. Mode Recorded P[...]

67 2 Common Operations e.g.: To set the [Quality Level] on the [ A Rec. Mo de] menu 1 Press the 3 button in A mo de. The [ A Rec. Mode] menu appears. 2 Press the four-way contr oller ( 3 ). The frame move s to [Image Tone ]. 3 Press the four-way contr oller ( 3 ) twice. The frame move s to [Quality Level]. 4 Press the four-way contr oller ( 5 ). A [...]

68 2 Common Operations 6 Press the shutter relea se button halfway. The setting is saved and t he camera returns to capture mode. When the shutter release but ton is pressed fully, the pi cture is taken. 6 Press the Q button. When t he [ A Rec. Mode] menu is displayed from A mode , the setting is saved and t he camera returns to playback st atus. 6[...]

69 2 Common Operations This displays the items that can be set with the menus and provides descriptions of each item. See the list of default settings in the Appendix “Default Settings” (p.291) to deci de whether you want th e settings saved when the camera is turned off an d whethe r you want the settings returned to the defaults when the came[...]

70 2 Common Operations *IQ Enhanc er = Image Qua lity Enhanc er Blink Detect ion For choos ing whethe r to use the Blink D etection function with th e Face Dete ction function p.138 Digital Zoom For choosing whether or not to use the digital zoom function p.90 Instant Revi ew Fo r choosing whe ther to displ ay Instant Review p.139 Memory For choos [...]

71 2 Common Operations [ W Setting] Menu (*) Optio WG-1 GPS only Item Description Pag e Sound For adjusti ng the operat ion volume and p layback volume, and se tting the star t-up sound, shutter sound, key ope ration soun d, and self-t imer sound p.231 Date Adjus tment For a djusting the d ate and time p.233 Alarm For setting the alarm p.235 World [...]

72 2 Common Operations Setting 1/4 MENU Exit Sound Date Adjustment 01/01/201 1 Worl d Tim e Alarm English Standard T ext Size [ W Setting] Menu 1 [ W Setting] Menu 2 [ W Setting] Menu 3 Setting 2/4 MENU Exit Video Out Folder Name Date Auto Brightness Level HDMI Out Eye-Fi NTSC USB Connection MSC Setting 3/4 MENU Exit Quick Zoom Guide Display Reset [...]

3 Taking Pictures Taking Still Pictures ....... ................ ........... 74 Setting the Shooting Func tions ...... ....... 117 Taking Pictures Underwat er ......... ......... 148 Recording Movies ............ .............. ......... 150 Saving the Settings (Mem ory) ...... ......... 158[...]

74 3 Taking Pict ures Taking Still Pictures This camera is equipped with functi o ns and shooting modes that su pport a wide array of scenes and subjects. This section explains sh ooting using the default settings when shipped. 1 Press the power switch. The camera turns on and is re ady to take st ill pictures. In this manua l, this is call ed Stil[...]

75 3 Taking Pict ures You can change the captured area by pressin g the zoom button (p.88). Right ( x ) Enla rges th e subj ect. Left ( w ) Widens the area that is captured by the camera . 3 Press the shutter relea se button halfway. The camera emits Focus Assist li ght in dark shooting situat ions. The focus frame (or face detecti on frame) on the[...]

76 3 Taking Pict ures The shutter relea se button works in a two-step action as follows. Press halfway This refers to pressing the shutter release button ge ntly to the first position. This locks the focus setting and the exposure. The green focus frame lights on the display when the shutter release button is pressed halfway and the subject is in f[...]

77 3 Taking Pict ures The image appea rs on the display temp orarily (Insta nt Review) immediately after it is captured. If the camera detects that the subje ct’s eyes are clo sed while Fa ce Detecti on (p.80) is a ctivated, the messag e [Closed eyes have be en detected] appears fo r 3 seconds (Blink Detection). Instant Review and Blink Detection[...]

78 3 Taking Pict ures This camera has a variety of shooting modes that let you take pictures or record movies and sound in different situations si mply by choosing the right mode for the particular situation from the Capture Mode Palette. 1 Press the four-way contr oller ( 3 ) in A mode. The Capture Mode Pal ette appears. 2 Use the four-way control[...]

79 3 Taking Pict ures The following 24 modes can be selecte d with Capture Mode Palette. Item Description Page b Auto Picture Automatica lly select s the best capt ure mode p.84 R Program Used f or basic shooting. Various f unctions can also be set wi th this mode p.85 A Night Sc ene For night time images. Us e of a tripod or other support i s sugg[...]

80 3 Taking Pict ures * Green Mode (p.86) and Voice Recording (p .222) are available in addition to the ones noted above. When the camera dete cts a person’s face in the image, the Face Detection function displays a yellow face de tection frame aro und the face on the display screen, sets the focus (Face Detect ion AF) and co mpensates th e expos[...]

81 3 Taking Pict ures By default, the Face Detection function is set to Face Detection On. You can switch to the Smile Capture func tion, whic h automatically releases the shutter when your subject smiles. The Face Detection function is switched as follows each time the I button is pressed: Smile Capture ´ Self-portrait Assist ´ Self-portrait Ass[...]

82 3 Taking Pict ures • The Face Detection function cannot be set to off in b (Auto Picture), B (Night Scene Portrait), c (Portra it), or R (Kids). Any one of Face Detection On, Smile Capture, Self-portr ait Assist or Self-port rait Assist + Smile Capture is always activated in these modes. • When Face Detection Off is selected, selecting 9 ( G[...]

83 3 Taking Pict ures The macro lights around th e lens blink when the came ra detects people faces in the Self-portrait Assist or Self-portrait Assist + Smile Capture function. The position of the blinking light indicates where the detected face is on the screen. To Use the Self-portr ait Assi st Function • The camera ca n tell the position of u[...]

84 3 Taking Pict ures In b (Auto Picture) mode, the camera automatically selects th e most appropriate mode dep ending on t he situations and subj ects. 1 Press the four-way contr oller ( 3 ) in A mode. The Capture Mode Pal ette appears. 2 Use the four-way controller ( 2345 ) to select b (Auto Picture). 3 Press the 4 button. Auto Picture mo de is s[...]

85 3 Taking Pict ures 5 Press the shutter relea se button fully. The picture is taken. In R (Program) mode, the shutter speed and the aperture are set automatically by th e camera during shooting. However, you can se lect other functions such as the flash mode and recorded pixels. 1 Press the four-way contr oller ( 3 ) in A mode. The Capture Mode P[...]

86 3 Taking Pict ures 3 Press the 4 button. Program mode is selected an d the camera returns to capt ure mode. When the c amera detec ts a person’s face, the Face Dete ction functio n is activated and the f ace detection fr ame appears ( p.80 ). 4 Set the functions you want to use. Refer to “Setting th e Shooting Functi ons” (p.117 - p.147) f[...]

87 3 Taking Pict ures 1 Press the Green butto n in A mode. The camera switches to 9 mode. Press the Green bu tton again to return to the status be fore 9 mode was selected. When the c amera detec ts a person’s face, the Face Dete ction function is act ivated and the fac e detection frame appears (p. 80). 2 Press the shutter relea se button halfwa[...]

88 3 Taking Pict ures You can use th e zoom to change the captured area. 1 Press the w / x button in A mode. w Wide (left) Widens the area that is captured by the camera. x Tele (right) Enlarges the sub ject. If you continue to press x , the camera automatically swit ches from Optical Zoom to Intel ligent Zoom and stops at the point where the zoom [...]

89 3 Taking Pict ures Recorded pixels and the maximum zoom ratio (*) V can only be set for re corded pix els when (Report) mode i s set. Recorded Pixels Intelligent Zoom (The zoom ratio includ es the 5× op tical zoom .) Digital Zoom g / i / j Not Available (5× opti cal zoom only) Equivalent to approx. 3 3.5× 6 / Approx. 7.0× f / Approx. 8.3× h[...]

90 3 Taking Pict ures The digital zoom is set to O (On) in the default settings. To take pictures using only the optical zoom and Inte lligen t Zoom, set the digital zoom to P (Off). 1 Press the 3 button in A mo de. The [ A Rec. Mode] menu appears. 2 Use the four-way controller ( 23 ) to select [Digital Zoom]. 3 Use the four-way controller ( 45 ) t[...]

91 3 Taking Pict ures 1 Press the four-way contr oller ( 3 ) in A mode. The Capture Mode Pal ette appears. 2 Use the four-way controller ( 2345 ) to select A (Night Scene) , B (Night Scen e Portrait), c (D igital SR), S (Fireworks), or U (Candlelight). 3 Press the 4 button. The shooting mode is select ed and the camera re turns to captur e mode. Wh[...]

92 3 Taking Pict ures c (Portrait) mode is suitable for taking pictures of people. It reprod uces a healthy and bright skin tone. The Face Detection function (p.80) operates for the shooting mode, ma king it easier to emphasize the subject’s face when taking pictures. 1 Press the four-way contr oller ( 3 ) in A mode. The Capture Mode Pal ette app[...]

93 3 Taking Pict ures R (Kids) mode is suitable for taking pictures of moving children. It also reproduces healthy and bright ski n to ne. Face Detection fu nction (p.80) operates automatically in R mode, making it easier to emph asize the subject’s face when taking pictures. 1 Press the four-way contr oller ( 3 ) in A mode. The Capture Mode Pal [...]

94 3 Taking Pict ures In e (Pet) mode, the camera automati cally releases the sh utter when the pet is detected. Also th e camera can register pets. 1 Press the four-way contr oller ( 3 ) in A mode. The Capture Mode Pal ette appears. 2 Use the four-way controller ( 2345 ) to select e (Pet). 3 Press the 4 button. e (Pet) mode is selected and the cam[...]

95 3 Taking Pict ures 2 Press the I button aga in. The pet registration scree n appears. Aiming the camera at the pet’s full face automatically releases the shutter and the pet registrat ion confirmation di alog appears. When you select [Regi stry] using four- way controller ( 2 ) and press the 4 button, the picture of t he registered pet is indi[...]

96 3 Taking Pict ures If you have registered two or thr ee pets, choose the pet you want to detect. 1 Press the I button on th e capture status sc reen in e (Pet) mode. The pet registration scree n appears. 2 Use the four-way cont roller ( 45 ) to select the pet you want to detect . 3 Press the 4 button. The selecte d pet is swi tched to the pet yo[...]

97 3 Taking Pict ures 1 Press the four-way contr oller ( 3 ) in A mode. The Capture Mode Pal ette appears. 2 Use the four-way controlle r ( 2345 ) to select Q (Surf & Snow) or (Sport). 3 Press the 4 button. The shooting mode is selec ted and the ca mera returns t o capture mode. When the camera d etects a person’ s face, the Face Detection [...]

98 3 Taking Pict ures 5 Press the shutter relea se button fully. The picture is taken. Take crisp and easy-to-read pictures of text. It is useful for taking pictures of and saving impo rtant documents, and when the text is to o small and difficult to read. 1 Press the four-way contr oller ( 3 ) in A mode. The Capture Mode Pal ette appears. 2 Use th[...]

99 3 Taking Pict ures 5 Press the 4 button. The selecte d icon appears an d the camera returns to capt ure status. 6 Press the shutter relea se button halfway. The focus frame on t he display turns green when t he camera focuses on the subject at the correct distanc e. 7 Press the shutter relea se button fully. The picture is taken. In the Digital [...]

100 3 Taking Pict ures 3 Press the 4 button. Digital Microscope mode is selected and the camera returns to capt ure mode. 4 Press the w / x button. If you press x , the camera enlarges the subject. w Wide (left) Widens the area that is captured by the camera. x Tele (right) Enlarges the sub ject. 5 Press the shutter relea se button halfway. The foc[...]

101 3 Taking Pict ures In N (Frame Composi te) mode, you can take pictures using the frames stored in the camera. 1 Press the four-way contr oller ( 3 ) in A mode. The Capture Mode Pal ette appears. 2 Use the four-way controller ( 2345 ) to select N (Frame Composite). 3 Press the 4 button. The 12-frame displ ay of the fr ame selection s creen appea[...]

102 3 Taking Pict ures 6 Press the 4 button. The frame appears on the disp lay. When the c amera detec ts a person’s face, the Face Dete ction functio n is activated and the fa ce detection frame appears (p.80). 7 Press the shutter relea se button halfway. The focus frame on t he display turns green when t he camera focuses on the subject at the [...]

103 3 Taking Pict ures In Self-timer mode, the picture is taken ten sec onds or two seconds after the shutter re lease butt on is pressed . Stabilize the camera with a tripod or other support when ta king a picture with the self-timer. 1 Press the four-way contr oller ( 2 ) in A mode. The [Drive Mode] screen appears. 2 Use the four-way controller ([...]

104 3 Taking Pict ures 5 Press the shutter relea se button fully. Countdown starts and the remainin g seconds are displayed on th e screen. If you select g The self timer lamp and all of the macro li ghts turn on. From 4 seconds before shooting , the macro lights turn off in order from the top right. From 3 seconds before shooting , the self timer [...]

105 3 Taking Pict ures 1 Press the four-way contr oller ( 2 ) in A mode. The [Drive Mode] screen appears. 2 Use the four-way controller ( 45 ) to select j or c and press the 4 button. The camera is ready for continuous shooting and burst shoot ing. 3 Press the shutter relea se button halfway. The focus frame on t he display turns green when t he ca[...]

106 3 Taking Pict ures You can use the remote control (op tio nal) to take pictures while you are away from the camera. 1 Press the four-way contr oller ( 2 ) in A mode. The [Drive Mode] screen appears. 2 Use the four-way controller ( 45 ) to select i and press the four-way controlle r ( 3 ). •W i t h j , you can continue shooting until the memor[...]

107 3 Taking Pict ures 3 Use the four-way controller ( 45 ) to select i or h and press the 4 button. The self-timer lamp begi ns to blink slowly and the camera i s ready to take a picture with the remote cont rol. When the c amera detec ts a person’s face, the Face Dete ction function is act ivated and the fac e detection frame appears (p. 80). 4[...]

108 3 Taking Pict ures In this mode, a set number of pictures can be taken automatically at a set interval from a set time. 1 Press the four-way contr oller ( 2 ) in A mode. The [Drive Mode] screen appears. 2 Use the four-way controller ( 45 ) to select k (Interval Shoot) and press the 4 button. The current i nterval shoot se ttings appear for appr[...]

109 3 Taking Pict ures 6 Set the number of shot s. 1 Press the four-way controller ( 5 ). 2 Use the four-way controller ( 23 ) to set [Number of Shot s], then press the four-way controller ( 5 ). The frame returns to [Number of Shots]. 7 Press the four-way contr oller ( 3 ). The frame mo ves to [Start Del ay]. 8 Set the start delay. 1 Press the fou[...]

110 3 Taking Pict ures Press the shutter release button on ce to automatica lly adjust the exposure and take thre e pictures in su ccession. After taking the pictures, you can select the best one. The shooting order is best exposu re → –1.0 EV → +1.0 EV. 1 Press the four-way contr oller ( 2 ) in A mode. The [Drive Mode] screen appears. 2 Use [...]

111 3 Taking Pict ures In X (Digital Wide) mode, you ca n stit ch two vertical imag es captured with this camera into a single fram e up to approx. 21 mm coverage (35 mm film equivalent). 1 Press the four-way contr oller ( 3 ) in A mode. The Capture Mode Pal ette appears. 2 Use the four-way controller ( 2345 ) to select X (Digital Wide). Using the [...]

112 3 Taking Pict ures 3 Press the 4 button. The camera enters the X mode. Turn the came ra 90° clo ckwise and align your first picture. When the c amera detec ts a person ’s face, the Face Detection func tion is acti vated and the face detection frame appears (p.80) . 4 Press the shutter relea se button halfway. The focus frame on t he display [...]

113 3 Taking Pict ures 1 When the shooting screen for the second image is displayed in step 5 on p.112, press t he 4 button or the four-way controller ( 3 ). A confirmation dial og appears. 2 Use the four-way controller ( 23 ) to select an option a nd press the 4 button. • To min imize distortion when taking th e second image, turn the camera so [...]

114 3 Taking Pict ures In F (Digital Panorama) mode, you ca n stitch together two or three captured frames to create a panoramic photograph with the camera. 1 Press the four-way contr oller ( 3 ) in A mode. The Capture Mode Pal ette appears. 2 Use the four-way controller ( 2345 ) to select F (Digital Panorama). 3 Press the 4 button. The camera ente[...]

115 3 Taking Pict ures 5 Press the shutter relea se button halfway. The focus frame on t he display turns green when t he camera focuses on the subject at the correct distanc e. 6 Press the shutter relea se button fully. The screen for taki ng the second fra me is displayed after you take the first frame. If you select right ( 5 ) in step 4: The ri[...]

116 3 Taking Pict ures 1 After shooting the first fr ame in step 6 on p.115 or the second frame in step 7, press the 4 button or th e four-way controller ( 3 ). A confirmation dial og appears. 2 Use the four-way controller ( 23 ) to select an option a nd press the 4 button. To Cancel after Taki ng the First o r Second F rame Save Saves the capt ure[...]

117 3 Taking Pict ures Setting the Shooting Functions Selecting the Flash Mode , Auto The flash di scharges aut omaticall y depending on the light condition s. a Flash Off The flash does not discharg e, regardl ess of the bri ghtness. Use this mode to take picture s where flash p hotography i s prohibit ed. b Flash On The flash discha rges regardl [...]

118 3 Taking Pict ures 1 Press the four-way contr oller ( 4 ) in A mode. The [Flash Mod e] screen appe ars. The flash mode changes each time the button is pressed. You can al so change the settin g using the four-way controller ( 23 ). 2 Press the 4 button. The setting is saved and t he camera returns to capture mode. About the red- eye phenomenon [...]

119 3 Taking Pict ures 1 Press the four-way contr oller ( 5 ) in A mode. The [Focus Mode] screen appea rs. The focus mode changes each ti me the button is pressed. You can al so change the setting using the four-way controller ( 23 ). 2 Press the 4 button. The setting is saved and t he camera returns to capture mode. Selecting the Focus Mode = Stan[...]

120 3 Taking Pict ures The procedure for setting the focus manually ( ) is described belo w. 1 Press the four-way contr oller ( 5 ) in A mode. The [Focus Mode] screen appea rs. 2 Use the four-way controller ( 5 ) to select . 3 Press the 4 button. The central portio n of the image is magnified to f ull screen on th e display. 4 Press the four-wa[...]

121 3 Taking Pict ures You can change the a utofocus area (Focus ing Area). 1 Press the 3 button in A mo de. The [ A Rec. Mode] menu appears. 2 Use the four-way cont roller ( 23 ) to select [AF Setting]. 3 Press the four-way contr oller ( 5 ). The [AF Setting] screen appea rs. 4 Use the four-way controller ( 23 ) to select [ Focusing Area]. 5 Press[...]

122 3 Taking Pict ures 8 Press the 3 button twice. The came ra returns to ca pture mode . When [Auto Macro] is on, the focu s is adjusted to the macro range (distance to the subject is 10 cm to 60 cm) as necessary, even if the focus mode setting is AF (Standard). When it is off and the focus mode is set to Standard ( = ), the AF operates only in th[...]

123 3 Taking Pict ures The camera automatically emits the Focus assist light in dark shooting situations. You can set the light to on or off. 1 Press the 3 button in A mo de. The [ A Rec. Mode] menu appears. 2 Use the four-way cont roller ( 23 ) to select [AF Setting]. 3 Press the four-way contr oller ( 5 ). The [AF Setting] screen appea rs. 4 Use [...]

124 3 Taking Pict ures For setting th e tone of images. You can select from [Bright], [Natura l], or [Monochrome]. The default setting is [Bright]. 1 Press the 3 button in A mo de. The [ A Rec. Mode] menu appears. 2 Use the four-way controller ( 23 ) to select [I mage Tone]. 3 Press the four-way contr oller ( 5 ). A pull-down menu appears. 4 Use th[...]

125 3 Taking Pict ures You can choose recorded pixels settings for still picture s. The larger the number of recorded pixe ls, the clearer the de tails will appear when you print your picture. As the quality of the printed picture also depends on the image quality, exposure c ontrol, resolution of the printer, and other factors, you do not need to [...]

126 3 Taking Pict ures 1 Press the 3 button in A mo de. The [ A Rec. Mode] menu appears. 2 Use the four-way controller ( 23 ) to select [R ecorde d Pixels]. 3 Press the four-way contr oller ( 5 ). A pull-down menu appears. 4 Use the four-way controller ( 23 ) to chang e the number of recorded pixe ls. 5 Press the 4 button. The setting is sav ed. 6 [...]

127 3 Taking Pict ures Select the quality (data compression ratio) for still images according to how the images will be used. The more stars ( E ), the higher the quality of the image, but the file size increases. The selected Recorded Pixel s setting also affects the size of the image file ( 1 p.125). Quality Level 1 Press the 3 button in A mo de.[...]

128 3 Taking Pict ures You can take pictur es in natural colors by adjusting the white balance according to the light conditions at the time of shooting. 1 Press the 3 button in A mo de. The [ A Rec. Mode] menu appears. 2 Use the four-way controller ( 23 ) to select [Wh ite Balance]. 3 Press the four-way contr oller ( 5 ). The [White Balance ] scre[...]

129 3 Taking Pict ures 6 Press the 3 button. The came ra returns to ca pture mode . Refer to the followi ng “Manual Setting” for inst ructions on adjusti ng the white balance manually . Have a blank sheet of white paper or simi lar material ready. 1 In the [White Balance] screen , use the four-w ay controller ( 23 ) to select K (Manua l). 2 Poi[...]

130 3 Taking Pict ures You can set the area of the screen where the brightness is me tered to determine the exposu re. 1 Press the 3 button in A mo de. The [ A Rec. Mode] menu appears. 2 Use the four-way controller ( 23 ) to select [AE Metering]. 3 Press the four-way contr oller ( 5 ). A pull-down menu appears. 4 Use the four-way controller ( 23 ) [...]

131 3 Taking Pict ures You can select the sensiti vity to su it the b rightness of the surroundi ngs. 1 Press the 3 button in A mo de. The [ A Rec. Mode] menu appears. 2 Use the four-way con troller ( 23 ) to sele ct [Sensitivity]. 3 Press the four-way contr oller ( 5 ). A pull-down menu appears. 4 Use the four-way controller ( 23 ) to chang e the [...]

132 3 Taking Pict ures Set the sensitivity range when the sensitivity is set to AUTO. The sensitivity can be set to 80-100, 80-200, 80-400, 80-800, and 80-1600. 1 Press the 3 button in A mo de. The [ A Rec. Mode] menu appears. 2 Use the four-way controller ( 23 ) to select [AUTO ISO Range]. 3 Press the four-way contr oller ( 5 ). A pull-down menu a[...]

133 3 Taking Pict ures For adjusting the overall brightne ss of the picture. Use this function to take pictures that are intentionally overexp osed or underexposed. 1 Press the 3 button in A mo de. The [ A Rec. Mode] menu appears. 2 Use the four-way controller ( 23 ) to select [EV Compensation]. 3 Use the four-way controller ( 45 ) to select the EV[...]

134 3 Taking Pict ures Expands the dynamic range and preven ts bri ght and dark area s from occurring. [Highlight Correction] adj usts the b right areas when the image is too bright and [Shadow Correctio n ] adjusts the dark area s when the image is t oo dark. 1 Press the 3 button in A mo de. The [ A Rec. Mode] menu appears. 2 Use the four-way cont[...]

135 3 Taking Pict ures You can set this function to corre ct for camera sh ake when taking stil l shots. If Pixel Track SR is set to O (On), the camera automatically corrects for camera shake in the images you shot. The default setting is P (Off). 1 Press the 3 button in A mo de. The [ A Rec. Mode] menu appears. 2 Use the four-w ay controll er ( 23[...]

136 3 Taking Pict ures In this mode, a set number of pictures can be taken automatically at a set interval from a set time. 1 Press the 3 button in A mo de. The [ A Rec. Mode] menu appears. 2 Use the four-way controller ( 23 ) to select [I nterval Shoot]. 3 Press the four-way contr oller ( 5 ). The [Interval Shoot] setting s creen appears. [I nterv[...]

137 3 Taking Pict ures 5 Press the four-way contr oller ( 3 ). The frame move s to [Number of Sh ots]. 6 Set the number of shot s. 1 Press the four-way controller ( 5 ). 2 Use the four-way controller ( 23 ) to set [Number of Shot s], then press the four-way controller ( 5 ). The setting is saved, and the frame returns to [Number of Shots] . 7 Press[...]

138 3 Taking Pict ures This specifies whether Blink Detect ion works when you use the Face Detection fu nction. The de fault setting i s O (On). 1 Press the 3 button in A mo de. The [ A Rec. Mode] menu appears. 2 Use the four-way controller ( 23 ) to select [B link Detection]. 3 Use the four-way controller ( 45 ) to switch between O (On) or P (Off)[...]

139 3 Taking Pict ures Use this setting to sp ecify whether or not an Instant Review is displayed immediately after images are shot. The default setting is O (On: displays the image). 1 Press the 3 button in A mo de. The [ A Rec. Mode] menu appears. 2 Use the four-way controller ( 23 ) to selec t [Instant Review]. 3 Use the four-way controller ( 45[...]

140 3 Taking Pict ures 1 Press the 3 button in A mo de. The [ A Rec. Mode] menu appears. 2 Press the four-way contr oller ( 23 ) to select [G reen Button]. 3 Press the four-way contr oller ( 5 ). A pull-down menu appears. 4 Use the four-way controller ( 23 ) to select a func tion you want to assign. 5 Press the 4 button. The setting is sav ed. 6 Pr[...]

141 3 Taking Pict ures You can register frequently used func tions on the four-way controlle r. Using this functio n, you can directly set the function s by pressing the four-way controller without disp laying the menu in Capture mode. In [Fn Setting], still picture mode and Movie mode have different settings. To execute [Fn Setting] in movie mode [...]

142 3 Taking Pict ures 10 Press the 3 button twice. The came ra returns to ca pture mode . The default settings for Fn settings Functions that can be assigned to each key * The items displayed chang e depending on the [Image T one] selected on the [ A Rec. Mode] menu. When yo u have selected either [Bright] or [Natural], [Saturation] is di splayed,[...]

143 3 Taking Pict ures Press the Green button in the shootin g mode to display the Fn Se tting screen. Select an item with the four-way controller ( 2345 ), and press either the ( 23 ) or ( 45 ) four-way controller to cha nge the settings. You can give th e image sharp or so ft outlines. 1 Press the 3 button in A mo de. The [ A Rec. Mode] menu appe[...]

144 3 Taking Pict ures You can set eithe r color brightne ss (Saturation) or the tone of monochrome images (Tone Adj ustment). The items displayed chan ge depending on the [Image Tone] selected on the [ A Rec. Mode] menu. 1 Press the 3 button in A mo de. The [ A Rec. Mode] menu appears. 2 Use the four-way contr oller ( 23 ) to select [Satu ration] [...]

145 3 Taking Pict ures For setting the i mage contrast level. 1 Press the 3 button in A mo de. The [ A Rec. Mode] menu appears. 2 Use the four-way controller ( 23 ) to select [Contrast]. 3 Use the four-way controller ( 45 ) to change t he contrast level. F Low G Normal H High 4 Press the 3 button. The setting is saved and t he camera returns to cap[...]

146 3 Taking Pict ures 5 Press the 4 button. The setting is sav ed. 6 Press the 3 button. The came ra returns to ca pture mode . You can take pictu res with clearer detail s by using image processing with IQ enhance r technique. 1 Press the 3 button in A mo de. The [ A Rec. Mode] menu appears. 2 Use the four-way controller ( 23 ) to select [IQ Enha[...]

147 3 Taking Pict ures Set whether or not to turn on the macro lights around the le ns. The macro lights turn on when the [Macro Light] is set to O (On). The default setting is P (Off). 1 Press the 3 button in A mo de. The [ A Rec. Mode] menu appears. 2 Use the four-way controller ( 23 ) to select [Ma cro Light]. 3 Use the four-way controller ( 45 [...]

148 3 Taking Pict ures Taking Pictures Underwater This camera complies with JIS waterproof grade 8 and can be used to take pictures at a depth of 10 m cont inuously for 2 hours. In addition, this camera complies with JIS dustproof grade 6 (IP68). 1 Press the four-way contr oller ( 3 ) in A mode. The Capture Mode Pal ette appears. 2 Use the four-way[...]

149 3 Taking Pict ures • Before ta king pictures underwater, make sure that there is no dirt or sand on the waterproof seal of the batter y/card and terminal covers and check that the covers are securely locked. • Before o pening the battery/card and terminal covers after usin g the camera underwater, make sure that there is no water, dir t, or[...]

150 3 Taking Pict ures Recording Movies This mode enables you to record movies. Sound is recorded at the sa me time. 1 Press the four-way contr oller ( 3 ) in A mode. The Capture Mode Pal ette appears. 2 Use the four-way controller ( 2345 ) to selec t C (Movie). 3 Press the 4 button. C (Movie) mode is s elected and the camera returns to capt ure mo[...]

151 3 Taking Pict ures You can change the captured area by press ing the w / x button. x Enlarges the subject w Widens the area that is capt ured by the camera 4 Press the shutter relea se button fully. Recording starts. You can cont inue recording until t he built-in memory or the SD Memory Card is full, or the siz e of the recorded movie reaches [...]

152 3 Taking Pict ures You can choose the number of recorded pixels and frame rate settings for movies. The more pixels th ere are, the clea re r the deta ils and the bigger the file size. The more frames per second, t he better the quality of the mo vie, but the file size becomes larger. * The frame rate (fps) indicates the number of fr ames per s[...]

153 3 Taking Pict ures 6 Use the four-way controller ( 23 ) to chang e the number of recorded pixels and frame rate. 7 Press the 4 button. The setting is sav ed. 8 Press the 3 button twice. The came ra returns to ca pture mode . In C (Movie) mode, you can co mpensate for camera sha ke while you are recording a movie with the Movie SR (Movie Shake R[...]

154 3 Taking Pict ures 5 Use the four-way controller ( 45 ) to select O (On) or P (Off). O (On) Automatically corrects for camera shake. P (Off) No correction for camera shake. The setting is sav ed. 6 Press the 3 button twice. The came ra returns to ca pture mode . In this mode, you can reco rd multiple still pictures taken automatically at a set [...]

155 3 Taking Pict ures 3 Press the 4 button while the sett ings are displayed. The Interval Movie setti ng screen appears. [Inte rval] is marked with the frame. 4 Set the interval. 1 Press the four-way controller ( 5 ). A pull-down menu appears. 2 Use the four-way controller ( 23 ) to set the interval , then press the 4 button. The frame returns to[...]

156 3 Taking Pict ures 10 Press the shutter relea se button halfway. The focus frame on the displ ay turns green if the subje ct is in focus. 11 Press the shutter relea se button fully. Interval movie recordi ng starts. The LCD turns o ff between shots (during standby). Press the power switch during standb y to display the rema ining time and in te[...]

157 3 Taking Pict ures • Confirm that the ba ttery is sufficiently charged before starting interval movie recording. If the battery is not sufficiently charged, it may become depleted during interval movi e recording and cause re cording of the movie to stop. • When perfo rming interval movie shoo ting, the setting s are fixed as follows; Recor[...]

158 3 Taking Pict ures Saving the Settings (Memory) The Memory function is for saving the current camera settings when th e camera is turned off. For some camera settings, the Memory function is always set to O (On) (the settings are saved when the camera is turned off), while for other s you can choose on or off (to choose whether the settings are[...]

159 3 Taking Pict ures 1 Press the 3 button in A mo de. The [ A Rec. Mode] menu appears. 2 Use the four-way controller ( 23 ) to select [Memory]. 3 Press the four-way contr oller ( 5 ). The [Memory] screen appears. 4 Use the four-way controller ( 23 ) to choose a n item. 5 Use the four-wa y controller ( 45 ) to select O (On) or P (Off). 6 Press the[...]

Memo 160[...]

4 Playing Back and Deleting Images Playing Back Images ....... .............. ......... 162 Deleting Images and Sou nd Files .......... 176 Connecting the Camera to AV Equipment .......................................................... ......... 183[...]

162 4 Playing Back and Dele ting Images Playing Back Images 1 Press the Q button after taking a picture. The camera enters the Q mode and the image appears on the display. Displaying one image in f ull in Q mode ( Q mode default setting) is called single-image display. 2 Press the four-way contr oller ( 45 ). The previous or next image ap pears. Pr[...]

163 4 Playing Back and Dele ting Images You can play back the movi es you have taken. Th e sound is played b ack at the same time. 1 Enter Q mode and use the four-way cont roller ( 45 ) t o choose the movie you want t o play back. 2 Press the four-way contr oller ( 2 ). Playback starts. The followin g operations can be performed during playback. Fo[...]

164 4 Playing Back and Dele ting Images You can display 6 or 12 thumbnails of captured images at a time. 1 Press the f button in Q mode. The 6-image display ap pears showing a page consisting of 6 thumbnail images. Pre ssing the f button again cha nges it to a 12-image display. A page consisting of 6 or 12 thumbnail images appears. The displayed im[...]

165 4 Playing Back and Dele ting Images The icons that appear on the images indicat e the follo wing: Press the 4 but ton to switch to s ingle-image di splay of the s elected image. Press the Q button t o switch to A mode. Press the f button in 12-image display to switch to folder or calendar display. Press the Green button to switch between folder[...]

166 4 Playing Back and Dele ting Images Calendar disp lay Recorded images and so und files are displayed by date in cale ndar format. The firs t image recorded on a date is displayed for that date on th e calendar. O appears fo r dates on which th e first recorded file was either sound-on ly data or a sti ll picture with a voice memo. Use the four-[...]

167 4 Playing Back and Dele ting Images • When th e frame is placed over an icon on the Playback Mode Palette, a guide for that function appears. • You can turn th e guide display off for the function on the Playback Mode Palette (p.252). OK OK MENU Cancel 1/2 OK OK MENU Cancel 1/2 OK OK MENU Cancel Edit 100 100 - 0038 0038 100 - 0038 38 Image [...]

168 4 Playing Back and Dele ting Images Playback Mode Palette Playback Mode Description Page u Slideshow For continuous ly playing back imag es. Screen o r sound effec ts can be set p.169 s Image Rotati on Rotates cap tured imag es. Useful w hen viewin g vertical images o n a TV p.172 k Small Face Filter Reduces the si ze of faces in the image, for[...]

169 4 Playing Back and Dele ting Images You can play back recorded images and movies one after anothe r. 1 Enter the Q mode and use the four- way controller ( 45 ) to choose the image to start the slide show with. 2 Press the four-way contr oller ( 3 ). The Playback Mode Palette appears. 3 Use the four-way controller ( 2345 ) to selec t u (Slidesho[...]

170 4 Playing Back and Dele ting Images You can set the playback interval and also a screen effect and so und effect for when one image changes to the next. 1 Use the four-way controller ( 23 ) to select [I nterval] in step 5 on p.169. 2 Press the four-way contr oller ( 5 ). A pull-down menu appears. 3 Use the four-way controller ( 23 ) to change t[...]

171 4 Playing Back and Dele ting Images 7 Use the four-way controller ( 23 ) to select [Start ]. 8 Press the 4 button. The slideshow starts usin g the selected interval and effect. • The slideshow will continue un til yo u press any button other than the 4 button. • Movies or pictures with sou nd wi ll be played through to the end before the ne[...]

172 4 Playing Back and Dele ting Images 1 Press the Q button after t aking a picture. The image appears on the displ ay. 2 Press the four-way contr oller ( 3 ). The Playback Mode Palette appears. 3 Use the four-way controller ( 2345 ) to select s (Image Rotation) and press the 4 button. The rotation select ion screen (0°, Right 90°, Left 90°, or[...]

173 4 Playing Back and Dele ting Images You can magnify an image up to ten times. 1 Enter the Q mode and use the four- way controller ( 45 ) to ch oose the image you want to m agnify. 2 Press the y button. The image is magnified (×1.1 to ×10). Holdi ng down the y bu tton continuously magnif ies the image. With Quick Zoom (p.251 ) set to O (On), p[...]

174 4 Playing Back and Dele ting Images You can enjoy playi ng back images with the subject’ s faces zoomed up simply by pressing the I button (Face close-up playback) if th e Face Detection functi on operated when the images were taken. 1 Enter the Q mode and use the four- way controller ( 45 ) to ch oose the image you want to m agnify. 2 Confir[...]

175 4 Playing Back and Dele ting Images The following operat ions can be perfo rmed during Face clo se-up playback mode. 3 Press the 4 button. The image returns to single-image di splay. Zoom button righ t ( y ) Zooms up on the sub ject being displayed f or Face clos e-up playbac k at an equ al or slight ly larger magn ification ratio . Zoom button[...]

176 4 Playing Back and Dele ting Images Deleting Images and Sound Files Delete images and sound files that you do not want to keep. You can delete a single image or sound file. 1 Enter the Q mode and use the four- way controller ( 45 ) to choose t he image/sound f ile you wa nt to delete. 2 Press the i button. A confirmation screen appe ars. 3 Use [...]

177 4 Playing Back and Dele ting Images If sound (voice memo) has been recorded with an image (p.226), you can delete the sound without deleting the image. 1 Enter the Q mode and use the four- way controller ( 45 ) to choose the image with sound. U appears on the images with sound. 2 Press the i button. A confirmation screen appe ars. 3 Use the fou[...]

178 4 Playing Back and Dele ting Images You can delete seve ral images/sound fi les selected from the 6- or 12-image display at once. 1 Press the f button once or t wice in Q mode. 6-image display or 12-image display appears. 2 Press the i button. P appears on the images and sound files. 3 Use the four-way controller ( 2345 ) to c hoose th e images[...]

179 4 Playing Back and Dele ting Images 4 Press the i button. A confirmation screen appe ars. 5 Use the four-way controller ( 2 ) to sele ct [Selec t & Delete] . 6 Press the 4 button. The selecte d images and soun d files are deleted. Deletes all the images and sound files at once. 1 Press the 3 button in Q mode. The [ W Setting ] menu appears.[...]

180 4 Playing Back and Dele ting Images 2 Use the four-way controller ( 23 ) to select [Delete All]. 3 Press the four-way contr oller ( 5 ). A confirmation dial og appears. 4 Use the four-way controller ( 2 ) to sele ct [Delete All]. 5 Press the 4 button. All the images and sound f iles are deleted. You can protect stored images and s ound files fr[...]

181 4 Playing Back and Dele ting Images 4 Press the 4 button. The screen for select ing [Single Image/Sound ] or [All Images/Sounds] appears. 5 Use the four-way controller ( 2 ) to select [Single Image/ Sound]. 6 Press the 4 button. The message [Prot ects this i mage/sound] appears . To protect another image or sound file, use the four-way control [...]

182 4 Playing Back and Dele ting Images 1 Select [All Images/Sounds] in step 5 on p.181. 2 Press the 4 button. 3 Use the four-way controller ( 2 ) to select [Protect]. 4 Press the 4 button. All the image s and sound fil es are protected and the screen sho wn in Step 1 reappears. 5 Use the four-way controller ( 23 ) to select [Cancel] and press the [...]

183 4 Playing Back and Dele ting Images Connecting the Camera to AV Equipment You can connect the camera to a TV or other device with a video IN jack or HDMl terminal and playback images. By using the supplie d AV cable (I-AVC7), you can capture and play back images on equipment with a video IN jack, such as a TV. • The po wer lamp on the camera [...]

184 4 Playing Back and Dele ting Images 1 Turn the AV device and camera off. 2 Open the t erminal co ver. Move the terminal cov er lock lever in the di rection shown by 1 , slide the cover in the direction shown by 2 a nd open the cove r in the direction sh own by 3 . 3 Connect the AV cable to the PC/AV terminal. 4 Connect the other e nds of the AV[...]

185 4 Playing Back and Dele ting Images Use a commercially available HDMI cable to connect the camera to a device with an HDMI terminal. 1 Turn the AV device and camera off. 2 Open the t erminal co ver. Move the terminal cov er lock lever in the di rection shown by 1 , slide the cover in the direction shown by 2 a nd open the cove r in the directio[...]

186 4 Playing Back and Dele ting Images Close the terminal cover securely when not using the terminal. <How to close the terminal cover> Close the cover in the opposite direction indicated by 3 . While lightly pressing on the terminal cover, slide it away from 2 until it clicks.[...]

5 Editing and Printing Images Editing Images ............... ................ ......... 188 Setting the Printing Serv ice (DPOF) ...... 217 About Printing You can print pictures taken with the camera in the following ways. 1. Go to a photo processin g lab 2. Use a printer that has an SD Memory Card slot to print directly fr om the SD Memory Card 3.[...]

188 5 Editing and Printi ng Images Editing Images By changing the size and quality of a selected image, you can make the file size smaller than the original. You can use this functi on to continue taking pictures when th e SD Memory Card or the built-i n memory is full, by making the images smaller and overwriting the origina l images to make more [...]

189 5 Editing and Printi ng Images 6 Press the 4 button. A confirmation di alog for overwriti ng the image appears. If the selected image is protected, th e processed image is saved as a new image and the followi ng confirmation does not appear. 7 Use the four-way controller ( 23 ) to select [Ove rwrite] or [Save as]. 8 Press the 4 button. The resi[...]

190 5 Editing and Printi ng Images 4 Press the 4 button. The cropping screen appears. The largest si ze of the cropped image is shown with a green frame on the screen. The cropped image can not be larger than this cropping frame size. 5 Choose the cropping area . The follo wing operati ons move the green frame and set the area for cropping on the s[...]

191 5 Editing and Printi ng Images 3 Use the four-way controller ( 2345 ) to selec t k (Small Face Filter). 4 Press the 4 button. Face detection frames for face s that can be corrected are displayed. Proceed to Step 6 when there is only one detect ion frame. 5 Use the four-way controller ( 2345 ) to select a face to be processed. A green frame indi[...]

192 5 Editing and Printi ng Images 10 Press the 4 button. The camera returns to Q mode and the processed image is displayed. This mode lets you change the color tones an d perform special processing on a sel ected image. You may not be able to process images in the following situations: • When the size of face taken in relatio n to an image is to[...]

193 5 Editing and Printi ng Images 1 Enter the Q mode and use the four- way controller ( 45 ) to choose the image you want to edit. 2 Press the four-way contr oller ( 3 ). The Playback Mode Palette appears. 3 Use the four-way controller ( 2345 ) to select P (Digital Filter). 4 Press the 4 button. The digital filte r selection screen appears. 1 B&am[...]

194 5 Editing and Printi ng Images 5 Use the four-way controller ( 23 ) to choos e a digital filter you want to use. The preview image of the results of the filter ef fect appears. 6 Press the 4 button. A confirmation di alog for overwriti ng the image appears. If the selected image is protected, th e processed image is saved as a new image and the[...]

195 5 Editing and Printi ng Images 5 Use the four-way controller ( 23 ) to choose t he digital filter you want to use. The preview image of the results of the filter ef fect appears. 6 Use the four-way controller ( 45 ) to choose t he effect. 7 Press the 4 button. A confirmation di alog for overwriti ng the image appears. If the selected image is p[...]

196 5 Editing and Printi ng Images 5 Use the four-way controller ( 23 ) to choos e a digital filter you want to use. The preview image of the results of the filter ef fect appears. 6 Use the four-way controller ( 45 ) to adjust the effect. 7 Press the 4 button. A confirmation di alog for overwriti ng the image appears. If the selected image is prot[...]

197 5 Editing and Printi ng Images You can edit th e image to look like an ink rubbi ng. 1 Enter Q mode and use the four-way controller ( 2345 ) to choose the image you want to edit. 2 Press the four-way contr oller ( 3 ). The Playback Mode Palette appears. 3 Use the four-way controller ( 2345 ) to selec t (Ink Rubbing Filter). 4 Press the 4 button[...]

198 5 Editing and Printi ng Images 7 Use the four-way controller ( 23 ) to select [Ove rwrite] or [Save as]. 8 Press the 4 button. The images processed wi th the filter are saved. Make a collage image by placing captured image s on a selected pattern. 1 Enter Q mode and press the four- way controller ( 3 ). The Playback Mode Palette appears. 2 Use [...]

199 5 Editing and Printi ng Images 3 Press the 4 button. The item sele ction screen appea rs. 4 Use the four-way controller ( 23 ) to choos e the [Recorded Pixels]. 5 Press the four-way contr oller ( 5 ). A pull-down menu appears. 6 Use the four-way controller ( 23 ) to choose the recorded pixels. You can choose from h or h . 7 Press the 4 button. [...]

200 5 Editing and Printi ng Images 10 Use the four-w ay controll er ( 23 ) to choose the pat tern of layout. You can choose from 3 patterns of l ayout ( / / ). 11 Press the 4 button. Returns to the item sel ection screen. 12 Use the four-way controller ( 23 ) to choos e [Backgnd.]. 13 Press the four-way contr oller ( 5 ). A pull-down menu appears. [...]

201 5 Editing and Printi ng Images 16 Use the four-way controller ( 23 ) to choose [S elect image(s)]. 17 Press the four-way contr oller ( 5 ). The images to be selected ap pear. 18 Use the four-way controller ( 45 ) to choose the image to include and press the 4 button. The selecte d image is placed in the highlighted area in t he guide. The guide[...]

202 5 Editing and Printi ng Images 21 Use the four-way controller ( 23 ) to select [Create an image]. 22 Press the 4 button. A confirmation di alog for saving the i mage appears. 23 Use the four-way controller ( 2 ) to sele ct [Save ]. 24 Press the 4 button. The edited image is s aved. Saving the Edited Image The quality level of the image is fixed[...]

203 5 Editing and Printi ng Images You can correct images where the flash has caused the subject to appear with red ey es. 1 Enter the Q mode and use the four- way controller ( 45 ) to choose the image you want to corr ect. 2 Press the four-way contr oller ( 3 ). The Playback Mode Palette appears. 3 Use the four-way controller ( 2345 ) to selec t Z[...]

204 5 Editing and Printi ng Images This function lets you add a decorative frame to still pictures. There a re 6 frames already sto red in the camera. You can copy the optional frames from the CD-ROM (S-SW 117) supplied with the camera. 1 Enter the Q mode and use the four- way controller ( 45 ) to choose the image to which you want to add a frame. [...]

205 5 Editing and Printi ng Images 6 Press the y button. The selecte d frame appears in single- image display. You can choose another frame usin g either of the followi ng operations . 7 Press the 4 button. The frame pos ition and siz e adjustment screen appears. You can adjust the i mage using either of the following operati ons. 8 Press the 4 but[...]

206 5 Editing and Printi ng Images Optional Frames The optional frames are stored in t he CD-ROM (S-SW117) sup plied with the camera. To use these frames, copy t hem from the CD -ROM. These optional frames are deleted if the files on t he built-in memory are deleted with a computer or if the built-in memory is formatted. To Copy Frames 1 Remove the[...]

207 5 Editing and Printi ng Images The frames download ed from the PENT AX website or other source can be used for adding a frame to pictures. You can overlay you r original fr am e (decorative frame) on an image. You can select the type and color of an origin al frame and its p osition.Text can also be entered. Frame Text Stamp To Use a New Frame [...]

208 5 Editing and Printi ng Images 1 In Q mode, use the four-way controller ( 45 ) to choose the image you want to add a f rame to. 2 Press the four-way contr oller ( 3 ). The Playback Mode Palette appears. 3 Use the four-way controller ( 2345 ) to selec t E (Original Frame). 4 Press the 4 button. The original f rame type sel ecting screen app ears[...]

209 5 Editing and Printi ng Images 10 Use the four-way controlle r ( 23 ) to select [Text Stamp], and press the four-way co ntroller ( 5 ). The Text Stamp screen ap pears. When you do not enter characters, pro ceed to Step 12. 11 Set up the text stamp. For details, refe r to “To Set Up Text Stamp” (p.210). 12 Press the 4 button. A confirmation [...]

210 5 Editing and Printi ng Images 2 Press the Green butto n. The image position adjustment scre en appears. 3 Press the 4 button. The screen returns to the origina l screen. 1 Use the four-way controller ( 2345 ) to select a character and press the 4 button. The selected c haracter is input . Up to 52 characters can be input . 2 Use the four-way c[...]

211 5 Editing and Printi ng Images 3 Use the four-way controller ( 23 ) to select [Display Position] and press the four- way controller ( 5 ). 4 Use the four-way controller ( 23 ) to select the display position and press the four-way controller ( 4 ). 5 Use the four-way cont roller ( 23 ) to select [ Color] and press the four-way cont roller ( 5 ).[...]

212 5 Editing and Printi ng Images You can select a frame from the recorded movie to save as a still picture, divide a movie into two, or add a title picture to a movie. 1 Enter the Q mode and use the four- way controller ( 45 ) to ch oose the movie you w ant to ed it. 2 Press the four-way contr oller ( 3 ). The Playback Mode Palette appears. 3 Use[...]

213 5 Editing and Printi ng Images 7 Use the four-way controller ( 2345 ) to choose the fr ame you want to save. 2 Plays or pauses t he movie 3 Stops the movie and returns to the first fram e 4 Reverses the movie frame by frame 5 Advances the movie frame by frame 8 Press the 4 button. The selected frame i s saved as a still picture. 5 Select [Divid[...]

214 5 Editing and Printi ng Images 10 Press the 4 button. The movie is divided at th e specified po sition, the two portions are saved as new files, and the orig inal one is deleted. 5 Select [Adding title picture] on the movie edit select ion screen. 6 Press the 4 button. The screen appears for select ing a title picture . 7 Use the four-way contr[...]

215 5 Editing and Printi ng Images You can copy images and sound file s fr om the built-in me mory to the SD Memory Card and vice versa. This fu nction can only be selected when an SD Memory Card has been inserted in the came ra. 1 In Q mode, press the four-way controller ( 3 ). The Playback Mode Palette appears. 2 Use the four-way controller ( 234[...]

216 5 Editing and Printi ng Images All the images and sound files in the built-i n memory are copied to the SD Memory Card at once. Before copying the images, make sure that there is enough space on the SD Memory Card. 4 Use the four-way controller ( 2 ) to sele ct [ 2}{ ]. 5 Press the 4 button. All the images and sound f iles are copied to the SD [...]

217 5 Editing and Printi ng Images Setting the Printing Service (DPOF) DPOF (Digital Print Order For mat) is the format f or storing print order data on still pictures captured w ith a digital camera. Once the print order data has been stored, the pictures ca n be printed according to the DPOF settings using a DPOF-compatible printer or photo proce[...]

218 5 Editing and Printi ng Images 4 Use the four-way controller ( 23 ) to select [Single Image]. 5 Press the 4 button. The message [Applies DPOF se ttings to this image ] appears. To make DPOF settings for anot her image, use the four-way control ler ( 45 ) to select another image. If DPOF settings have already been made for an image, the previous[...]

219 5 Editing and Printi ng Images When you choose the number of copies and whether or not to insert the date, the settings are applied to all the images stored in the camera. 1 Select [All Images] in step 4 on p.218. 2 Press the 4 button. The message [Applies DPOF se ttings to all images] appe ars. 3 Choose the number of copies and whether to inse[...]

Memo 220[...]

6 Recording and Playing Back Sound Recording Sound (Voi ce Recording Mode) .......................................................... ......... 222 Adding a Voice Memo to Images ........... 226[...]

222 6 Recording an d Playing Back Sound Recording Sound (Voice Recording Mode) You can record sound with the camera. The micropho ne is located on front of the camera. When record ing sound, aim the microphone at the sound source to obtain the best sound quality. To use the Voice Recording function, reg ister Voice Recording to the Green Button. 1 [...]

223 6 Recording an d Playing Back Sound 1 Press the Green butto n in A mode. The camera enters Voice Recording mode. The remaining recordabl e time and the recording time of the curre nt file appear on the di splay. 1 Recording time 2 Remaining recordable time 2 Press the shutter relea se button fully. Recording starts. The self -timer lamp and REC[...]

224 6 Recording an d Playing Back Sound You can play back the sound files you made with Voice Recording. 1 Press the Q button. 2 Use the four-way controller ( 45 ) to choose a s ound file to play back. 3 Press the four-way contr oller ( 2 ). Playback starts. 1 Total file r ecording time 2 Playback time The followin g operations can be performed dur[...]

225 6 Recording an d Playing Back Sound 4 Press the four-way contr oller ( 3 ). Playback stops.[...]

226 6 Recording an d Playing Back Sound Adding a Voice Memo to Images You can add a voice memo to your still pictures. 1 Enter Q mode and use the four-way cont roller ( 45 ) t o choose the still pict ure to which you wa nt to add a voic e memo. 2 Press the four-way contr oller ( 3 ). The Playback Mode Palette appears. 3 Use the four-way controller [...]

227 6 Recording an d Playing Back Sound 1 Enter Q mode and use the four-way cont roller ( 45 ) t o choose the still picture with the voice memo that you want to play back. U appears on images with voic e memos in single-image displ ay. 2 Press the four-way contr oller ( 2 ). Playback starts. The followin g operations can be performed during playbac[...]

Memo 228[...]

7 Settings Camera Settings .......... ................. ........... 230[...]

230 7 Settings Camera Settings Formatting deletes all th e data on the SD Memory Card or the built-in memory. Be sure to use this came ra to format (initialize) an SD Memory Card that is unused or has been used on other cameras or di gital devices. 1 Press the 3 button in Q mode. The [ W Setting ] menu appears. When you press the 3 button in A mod [...]

231 7 Settings You can adjust the volume of operat ion sounds and change the t ype of sound. 1 Press the 3 button in Q mode. The [ W Setting ] menu appears. When you press the 3 button in A mod e, press the four-way controller ( 5 ) once. 2 Use the four-way controller ( 23 ) to select [Sound]. 3 Press the four-way contr oller ( 5 ). The [Sound] scr[...]

232 7 Settings 7 Press the 4 button. 8 Set [Shutter Sound] , [Operation Sound] and [Self-time r Sound] in the same way as in steps 4 to 7. 9 Press the 3 button. The screen returns to the [ W Setti ng] menu. You can use a sound recorded by th e camera for sound settings. The first two seconds of the selected sound file will be played as the [USER] s[...]

233 7 Settings You can change the initial date a nd time settings (p.55 ). You can al so set the style in which the date appears on the camera. 1 Press the 3 button in Q mode. The [ W Setting ] menu appears. When you press the 3 button in A mod e, press the four-way controller ( 5 ) once. 2 Use the four-way controller ( 23 ) to selec t [Date Adjust[...]

234 7 Settings 7 Use the four-way controller ( 23 ) to select [24h] (24- hour display) or [12h] (12-hour display). 8 Press the four-way contr oller ( 5 ). The frame returns to [Date Format]. 9 Press the four-way contr oller ( 3 ). The frame move s to [Date]. 10 Press the four-way contr oller ( 5 ). The frame move s to one of the following items dep[...]

235 7 Settings 13 Change the time in the same wa y as in steps 8 to 12. If you selected [12h] in st ep 7, the setting switches bet ween am and pm corresponding to the time. 14 Press the four-way contr oller ( 3 ) to sele ct [Setti ngs complete]. 15 Press the 4 button. The date and time setti ngs are saved and the screen returns to the [ W Setting] [...]

236 7 Settings 3 Press the four-way contr oller ( 5 ). The Alarm screen appears. 4 Press the four-way contr oller ( 5 ). A pull-down menu appears. 5 Use the four-way controller ( 23 ) to select t he alarm. Choose from [Off], [Once], or [Everyda y]. 6 Press the 4 button. 7 Press the four-way contr oller ( 3 ). The frame moves to the [Time] fi eld. 8[...]

237 7 Settings 1 Use the four-way controller ( 23 ) to select [Alarm] on the [ W Setting] menu. Check that [Alarm] is set to O (On). 2 Press the four-way contr oller ( 5 ). The Alarm screen appears. Check the alarm frequency and time . 3 Press the 3 button twice. The camera returns to A mode or Q mode. The Clock mode screen appears and the alarm ri[...]

238 7 Settings 1 Press the 3 button in Q mode. The [ W Setting ] menu appears. When you press the 3 button in A mod e, press the four-way controller ( 5 ) once. 2 Use the four-way controller ( 23 ) to select [Wor ld Time]. 3 Press the four-way contr oller ( 5 ). The [World Ti me] screen appe ars. 4 Use the four-way controller ( 23 ) to select X (De[...]

239 7 Settings 10 Press the 3 button twice. The camera returns to A mode or Q mode. 1 Press the 3 button in Q mode. The [ W Setting ] menu appears. When you press the 3 button in A mod e, press the four-way controller ( 5 ) once. 2 Use the four-way controller ( 23 ) to select [Wor ld Time]. 3 Press the four-way contr oller ( 5 ). The [World Ti me] [...]

240 7 Settings 7 Press the 4 button. The setting is sav ed. 8 Press the 3 button twice. The camera returns to A mode or Q mode. When X (Destinatio n) is selected in step 6, the X icon appears on th e display to indi cate that the des tination date and time are displayed in A mode. You can set the text size of the item selected with the cu rsor on t[...]

241 7 Settings You can change the lan guage in which the menus, error messages, e tc. are display ed. The camera supports the followin g langu ages: English, French, German, Spanish, Portuguese, Italia n, Dutch, Japanese, Danish, Swedish, Finnish, Polish, Czech, Hungarian, Turkish, Greek, Russian, Thai, Korean, and Chin ese (traditional and simplif[...]

242 7 Settings You can change the system for naming the folders for storing images. When the naming system is set to th e date, pictures ar e saved in separate folders by the date they were taken. Changing the System for Naming Folders Choice The name of th e folder Date (Default) xxx_mmdd (3-di git folder n umber_month da y) * xx x_ddmm (3-digi t [...]

243 7 Settings 1 Press the 3 button in Q mode. The [ W Setting ] menu appears. When you press the 3 button in A mod e, press the four-way controller ( 5 ) once. 2 Use the four-way controller ( 23 ) to selec t [Folde r Name]. 3 Press the four-way contr oller ( 5 ). A pull-down menu appears. 4 Use the four-way controller ( 23 ) to select the rule for[...]

244 7 Settings 3 Use the four-way controller ( 2345 ) to select the letter to enter, and press the 4 button. The first letter is fi xed and the cursor moves to t he second lett er. 4 Repeat step 3 and enter the remaining letters. 5 Press the four-way contr oller ( 4 ) while “A” is selected, or press ( 35 ) while “_” is selected. The frame m[...]

245 7 Settings 4 Use the four-way controller ( 23 ) to select a vid eo output format. Choose the video output fo rmat to match the out put format of th e AV equipment. 5 Press the 4 button. The setting is sav ed. When you connect the camera to AV equipment with an HDMI cable, set the appropriate video outp ut resolution for playing back images. The[...]

246 7 Settings 4 Use the four-way controller ( 23 ) to selec t an output format. Choose the HDMI output format to match t he output format of the AV equipment. 5 Press the 4 button. The setting is sav ed. The items on the pull-down menu vary depending on the selected Video output format. To change the display, set the Video output forma t before se[...]

247 7 Settings You can automatically transfer images or movies to a computer or similar devices via wireless LAN using a commercially available Eye-Fi card. For details on transferring images, refer to “Transferring Images Using an Eye-Fi Card” (p.280). The default setting is P (Off). 1 Press the 3 button in Q mode. The [ W Setting ] menu appea[...]

248 7 Settings You can adjust the brightness of the displ ay to 7 levels. 1 Press the 3 button in Q mode. The [ W Setting ] menu appears. When you press the 3 button in A mod e, press the four-way controller ( 5 ) once. 2 Use the four-way controller ( 23 ) to select [Brightne ss Level]. 3 Use the four-way controller ( 45 ) to ad just the brightness[...]

249 7 Settings You can save battery po wer by setting the display to dim automatically when no operation is performed for a fixed time. After the power saving function has been activated, the disp lay returns to the ordinary brightness if any button is pressed. 1 Press the 3 button in Q mode. The [ W Setting ] menu appears. When you press the 3 but[...]

250 7 Settings You can set the camera to turn off automatically when no operation is performed for a fixed time. 1 Press the 3 button in Q mode. The [ W Setting ] menu appears. When you press the 3 button in A mod e, press the four-way controller ( 5 ) once. 2 Use the four-way c ontroller ( 23 ) to sele ct [Auto Power Off]. 3 Press the four-way con[...]

251 7 Settings While playing back images in Q mode, you can set whether to use Quick Zoom to enlarge the playback image to 10× when pressing the y button once. 1 Press the 3 button in Q mode. The [ W Setting ] menu appears. When you press the 3 button in A mod e, press the four-way controller ( 5 ) once. 2 Use the four-way controller ( 23 ) to sel[...]

252 7 Settings Set whether to display the guide for the Capture Mode Palette or Playback Mode Palette. 1 Press the 3 button in Q mode. The [ W Setting ] menu appears. When you press the 3 button in A mod e, press the four-way controller ( 5 ) once. 2 Use the four-way controller ( 23 ) to select [G uide Display]. 3 Use the four-way controller ( 45 )[...]

253 7 Settings Pixel mapping is a functio n for mapping out and correcting for de fective pixels in the CCD sensor. Run the Pi xe l Mapping function if image dots always seem to be defective in the same place. 1 Press the 3 button in A mode, and then press the four-way controller ( 5 ) once. The [ W Setting ] menu appears. 2 Use the four-way contro[...]

254 7 Settings You can choose the start -up screen di splayed when the came ra is turned o n. You can choose an y of the followi ng images as the start-up screen: • The Guide Display Sta rt-up Scr een showin g a guide to the shooting modes and buttons • One of the 3 pre-installed screens • One of your own images (compatible images only) 1 In [...]

255 7 Settings You can reset the camera settings to their defaults. Refer to “Default Settings” (p.291) for the reset settings. 1 Press the 3 button in Q mode. The [ W Setting ] menu appears. When you press the 3 button in A mod e, press the four-way controller ( 5 ) once. 2 Use the four-way controller ( 23 ) to selec t [Reset]. 3 Press the fou[...]

256 7 Settings You can use th e camera as a clo ck. With the camera turned off, press and hold down the 4 button to display the clock on the disp lay. 1 Press and hold down the 4 button. The camera turns on and th e clock appears on the screen. The camera tu rns off automat ically after approximate ly 10 seconds. Pressing the power swit ch turns th[...]

8 Connecting to a Computer Setting Up Your Computer ............ ......... 258 Connecting to a Windows PC ......... ....... 265 Connecting to a Macintos h ........... ......... 274 Transferring Images Using an Eye-Fi Card ............ ............................ ........... ....... 280[...]

258 8 Connecting to a Compute r Setting Up Your Computer By installing the software included on the provided CD-R OM on your computer and conne cting the camera to your compute r with the USB cable, you can transfer images and movies captured with your camera to the computer and then display and ma nage them. This section explains how to insta ll t[...]

259 8 Connecting to a Compute r The following system requirements must be met for you to full y enjoy the images and movies captured with the camera on your computer. * Operation is not guarante ed on all computers meet ing the system requirements. * The system requirements describ e the mi nimum environment for playing movies. * Operation is not g[...]

260 8 Connecting to a Compute r Install the image viewin g/ma naging/editing software (Me diaImpression 3.0 for PENTAX). 1 Turn your Windows PC on. 2 Insert the CD-ROM (S-SW1 17) into the CD-ROM drive . [Auto play] screen appears. Click [PENTAX Software Install er], and then click [Yes]. 3 Click [ArcSoft]. The “Choose Setup Language” scree n ap[...]

261 8 Connecting to a Compute r 5 Click [Finish]. “MediaImpression 3.0 for PENTAX” installa tion is comp lete. 6 Click [Exit ] on the in stallation screen. The window closes. Install the image viewin g/ma naging/editing software (Me diaImpression 2.1 for PENTAX). 1 Turn your Macintosh on. 2 Insert the CD-ROM (S-SW1 17) into the CD-ROM drive . 3[...]

262 8 Connecting to a Compute r 6 Click [Close]. “MediaImpression 2.1 for PENTAX” installa tion is comp lete. 7 Click [Exit ] on the in stallation screen. The window closes. In order to better serve you, we r equest that you complete the product registration. If your computer is connected t o the Internet, please click [Product Registration] on[...]

263 8 Connecting to a Compute r Set the device to which the camera is connected with the USB cable. 1 Turn your camera on. 2 Press the 3 button in Q mode. The [ W Setting ] menu appears. When you press the 3 button in A mod e, press the four-way controller ( 5 ) once. 3 Use the four-way controller ( 23 ) to select [U SB Connection]. 4 Press the fou[...]

264 8 Connecting to a Compute r MSC (Mass Storage Class) A general-purpose driver program that handles devices connected to the computer via USB as a memory device. Also indicate s a standard for controlling USB devices with this driver. By simply connecting a device tha t supports USB Mass Storage Class, you can copy, read, and write files fr om a[...]

265 8 Connecting to a Compute r Connecting to a Windows PC Connect your camera to the W indows PC using the provided USB cable (I-USB7). 1 Turn your Windows PC on. 2 Turn your camera off. 3 Connect your camera t o the Windows PC usin g the USB cable. Connect the terminal of t he USB cable with arrow mark facing the front side of the camera . 4 Turn[...]

266 8 Connecting to a Compute r Transfer the images captured with the camera to your Windows PC. 5 Click [Import med ia files to local disk]. The “MediaImpressio n 3.0 for PENTAX” s tarts. 6 Set up [Destinat ion Folder]. 7 Select the image/s you want to copy, then click [Import Selected]. The selecte d images are copi ed to the PC. * To select [...]

267 8 Connecting to a Compute r 8 Click [Done]. 5 Double-click the [MediaImpression 3.0 f or PENTAX] icon on the desktop. 6 Click [PhotoImpression]. 7 Click [Import] . 8 Specify [Get Media Fr om]. When the “AutoP lay” Screen Does Not Appear[...]

268 8 Connecting to a Compute r 9 Set up [Destinat ion Folder]. 10 Select the image/s you want to copy, then click [Import Selected]. The selecte d images are copi ed to the PC. * To select two or more images, select them while pr essing th e Ctrl key. 11 Click [Done]. If the SD Memory Card has a volume label, the vo lume label name appears instead[...]

269 8 Connecting to a Compute r 1 Click the [Safely Remove Hardware] icon in the task bar. 2 Click [Eject xx x (name of the camera)]. A message appears indicati ng that the hardware can be safe ly removed. 3 Disconnec t the USB cable from your Windows PC and the camera. Disconnecting the Camera from Y our Windows PC • If the camera (remo vable di[...]

270 8 Connecting to a Compute r “MediaImpression 3.0 for PENTAX” le ts you view, edit, manage, search for, share, and print image s. 1 Double-click the [MediaImpression 3.0 for PENTAX] icon on the desktop. “MediaImpression 3.0 for PENTAX” starts and t he main window appears. A PhotoImpression You can view or mana ge still images. For e xamp[...]

271 8 Connecting to a Compute r A Views Displays the configuration of folde rs or groups sorted by your favorites, GPS information or a detected person. B Preview Area Displays the contents of the selected folder or sorte d group. C Actions This panel provides editing/managi ng functions, such as an importing, editing, movie making. PhotoImpression[...]

272 8 Connecting to a Compute r 1 Click [PhotoImpression] o r [VideoImpression] f rom the main window. 2 Select and cl ick the folder o r the group containing the image you want to view. Images are displayed. 3 Select and double-click the image y ou want t o view. The selecte d image is dis played with the viewer. With the viewer, you can enla rge/[...]

273 8 Connecting to a Compute r You can find mo re information on how to use “MediaImpression 3.0 for PENTAX” by using the help pages. 1 Click [Help] from [Menu] on the menu bar . The help sc reen appears. 2 Click the desired t opic. An explanatio n is displa yed. Details on How to Use “MediaImpression 3.0 for PENTAX”[...]

274 8 Connecting to a Compute r Connecting to a Macintosh Connect your camera to the Macintosh using the provided USB cable (I-USB7). 1 Turn your Macintosh on. 2 Turn your camera off. 3 Connect your camera to the Macint osh using the USB cable. Connect the terminal of t he USB cable with arrow mark facing the front side of the camera . 4 Turn your [...]

275 8 Connecting to a Compute r Transfer the images captured with the camera to your Macintosh. 5 Double-click the [MediaImpression] fo lder inside the [Applications] fold er. 6 Double-click the [MediaImpression 2.1 for PENTAX] icon. “MediaImpression 2.1 for PENTAX” starts and t he main browser window appears. 7 Set up [Destinat ion Folder] and[...]

276 8 Connecting to a Compute r 9 Click [Done]. 1 Drag [NO_NAME] on the desktop to the tras h. If the SD Memory Card has a volume label , drag the icon of that name to the tra sh. 2 Disconnect the USB cable from y our Macintosh a nd the camera. Disconnecting the Camera from Your Macintosh • If the camera (remo vable disk) is being used by an appl[...]

277 8 Connecting to a Compute r “MediaImpression 2.1 for PENTAX” le ts you view, edit, manage, search for, share, and print image s. 1 Double-click the [MediaImpression] fo lder inside the [Applications] fold er. 2 Double-click the [MediaImpression 2.1 for PENTAX] icon. “MediaImpression 2.1 for PENTAX” starts and t he main browser window ap[...]

278 8 Connecting to a Compute r A Views Displays the configuration of folders in your computer. When you bro wse a folder, the contents of the folder appear in th e media thumbnail pane. B Preview Area Displays the contents of the selected folder or the results of the most recent search (the file or folder that matches the se arch item). C Actions [...]

279 8 Connecting to a Compute r 1 Click [Pictures], [Vid eos], or [All Media] from the main window. 2 Select and click t he folder containing the image you want to view in the folder pane. Images are displayed in the media thumbnail pane. 3 Select and double-click the ima ge you want to view in the media thumbnail pane. The selected image i s displ[...]

280 8 Connecting to a Compute r Transferring Images Using an Eye-F i Card You can automatically transfer images or movies to a computer or similar devices via wireless LAN using a memory card that is equipped with the wireless LAN (Eye-Fi card) function. 1 Specify the wireless LAN acce ss point and transfer destination on the Eye-Fi card. For detai[...]

281 8 Connecting to a Compute r • When you use a new Eye-F i card, copy the install file of Eye-Fi Manager stored on the card to your computer befor e you format the card. • Do not use an Eye-Fi card, or set [Eye-Fi] to P (Off) in a location wher e wireless LAN devices are restricted or prohibited, such as on planes (since images are transferre[...]

Memo 282[...]

9 Appendix Functions Available for Each Shooting Mode ............... ................................. ......... 284 Messages .............. ............................ ....... 287 Troubleshooting ... ............................ ....... 289 Default Settings ........... ................. ........... 291 List of World Time Cities ............... .[...]

284 9 Appendix Functions Available for Each Shooting Mode √ : Can be set. ×: Cannot be set. ⎯ : Settings and changes are not applied. Function Shooting Mode b A A C a b B U K c R B Zoom button Zoom operation √ *2 √ *3 √ *3 √ *4 √ *3 √ *4 √ *3 √ *3 √ *5 I button Face Detectio n On √√√√ √ √ √ √ × Smile Captur[...]

285 9 Appendix X c Q e S F N 9 Shooting Mode Functio n × √ *6 √ *3 √ *3 √√ *3 √ *3 √ *6 √ *7 Zoo m operat ion Zoom button √√ √ × √√√ √ √ Face Detection On I button √√ √ √ √ √ √ √ √ Smile Capture × √ *33 √ *33 × √ *33 × √ *33 × √ *33 Self-portr ait Assist / Self-por trait Assist + Smi[...]

286 9 Appendix *1 Movie SR is used for movies, while Pixel Track SR is used for still pictur es. *2 Flowers cannot be detected when using Digital Zoom or Intell igent Zoom. *3 Optical zoom is always possible, digital zoom an d intelligent zoom cannot be used if the Sensitivity selection is ISO 3200/640 0. *4 Before shooting only opt ical zoom and d[...]

287 9 Appendix Messages Messages such as the foll owing may appear on the display duri ng camera operation. Message Description Battery depl eted The battery is exhausted. Charge the bat tery using th e battery ch arger (p.38). Memory card full The SD Memory Card is full and no more i mages can be saved. Insert a new SD Memory Car d or delete unwan[...]

288 9 Appendix Data being rec orded Displayed when you try to swit ch to Q mode while an image is st ill being r ecorded, or when the p rotect set ting or DPOF setting i s being change d. It disapp ears after t he image is re corded or th e setting is changed. Data being pro cessed Displayed when the camera take s more than five seco nds to display[...]

289 9 Appendix Troubleshooting Problem Cause Remedy The camera will not turn on The batter y is not ins talled Check if a battery is installed. If not, install a ba ttery. The battery is install ed incorrectly Check orie ntation o f the bat tery. Reinsert the battery accord ing to the +- symbols in the batte ry compartment (p .39). The batter y is [...]

290 9 Appendix The subj ect is not in focus The subject is diffic ult to focus on with autofocus The camera may hav e difficult y in focusing o n such sub jects as: lo w contrast su bjects (a whi te wall, a blue sky, e tc.), dark subjects, fi nely- patterned ob jects, rapidly -moving objects. It is also diff icult to get proper foc us when shoo tin[...]

291 9 Appendix Default Settings The table below lists the factory default settings. The meaning of the indica tions for menu items with a default setting is explained below. Last Memory Setting Yes : The current setting (last memory) is saved when the camera is turned off. No : The setting returns to the defaul t setting when the camera is turned o[...]

292 9 Appendix Movie Recorded Pixels M (1280×72 0/30 fps) Yes Yes p.152 Movie SR O (On) Yes Yes p.153 Interval Shoot Interval 1 min. Yes Yes p.154 Total Time 10 min. Yes Yes p.154 Start Delay In 0 hr. 0 min. Yes Yes p.154 D-Range Setting Highlight Correction P (Off) Yes Yes p.134 Shadow Co rrection P (Off) Yes Yes p.134 Pixel Track SR P (Off) Yes [...]

293 9 Appendix [ W Setting] Menu Items Item Default Setting Last Memory Setting Reset Setting Page Sound Operation Volume 3 Yes Yes p.231 Playback Volume 3 Yes Y es Start-up Sou nd 1 Yes Yes Shutter Soun d 1 Yes Yes Operation Sound 1 Yes Yes Self-timer Sound 1 Yes Yes Date Adjustment Date Forma t (Date) Acc ording to initial setting Yes No p.55 p.2[...]

294 9 Appendix *1 Except the folder name that you created *2 Optio WG-1 GPS only Playback Mode Palette Items GPS *2 GPS Setting Off Yes Y es GPS Guide Logging Off Yes Yes Auto Time Synch. Off Yes Y es Item Default Sett ing Last Memory Setting Reset Setting Page Slideshow Interval 3 se c. Yes Yes p.169 Screen E ffect Wipe Yes Yes Sound Ef fect On Ye[...]

295 9 Appendix Key Operation Protect Single Ima ge/ Sound Depending on th e recorded i mage/soun d ⎯⎯ p.180 All Images/ Sounds Depending on th e recorded i mage/soun d ⎯⎯ DPOF Single Im age Cop ies: 0 ⎯⎯ p.217 All Images Date: Off ⎯⎯ Start-up S creen O (On) Yes Yes p.254 Item Functio n Default Se tting Last Memory Setting Reset Sett[...]

296 9 Appendix List of World Time Cities City : indicates cities that can be set as ei ther the Initial Setting (p.51) or the World Time (p.237). Video Output For mat: indicates the video outpu t format of the city set as the Initial Setting. Region City name Video output format Region City name Video o utput format North America Honolulu NTSC Afri[...]

297 9 Appendix Optional Accessories A number of dedicated accessories are availa ble for this came ra. Products marked with an asterisk (* ) are the same as those supp lied with the camera. Power supply Rechargeable lithium-ion battery D-LI92 (*) Battery charger kit K-BC92 (*) (Battery charger D-BC92, AC plug cord) AC adapter kit K-A C117 (AC adapt[...]

298 9 Appendix Main Specifications Type Fully automatic compact digital still camera with built- in zoom lens Number of effective pixels Approx. 14 megapixels Image sensor 1/2.3 inch CCD Number of recorded pixels Still g (4288×3216), j (3216×3216), i (4224×237 6), 6 (3072×2304), (3072×1728), f (2592×1944), (2592×1464), h (2048×15 36), h (19[...]

299 9 Appendix Approximat e Image Storage Capacity and Re cording Time Still • The image s torage capacity i s for reference o nly. The actual image storage capac ity may vary depending on the SD Memory Card and the subject. • V (1280×960) can only be set for recorded pixels when (Report) mode is set. Movie/Sound Built-in Memory 2 GB SD Memory[...]

300 9 Appendix • The above fig ures are ba sed on our stand ard shooti ng conditio ns and may var y depending o n the subjec t, shooting co nditions an d type of the SD Memory Card used. • Recording c an continue un til the built -in memory or th e SD Memory Card is ful l, or the size of the recorded mov ie reaches 2 GB (w hen using an SDHC ca [...]

301 9 Appendix Focus T ype TTL contrast de tection system by sensor Multiple (9-point autof ocus)/spot/automatic tracking AF changeabl e Focus range (From lens face) Standard : 0.5 m - ∞ (Full zoom range) Macro : 0.1 m - 0.6 m (Full zoom range) 1cm Macro : 0.01 m - 0.3 m (At the intermediate position of the zoom range) * It is possible to switch [...]

302 9 Appendix Time function World Time 75 cities (28 time zones) Clock Mode Clock display by holding down 4 / W button while camera is turned off (appr ox. 10 sec.) Alarm Alarm with simultaneous displa y of the Clock mode at specified time Power source Rechargeable lithium-ion ba ttery D-LI92, AC adapter kit (optional) Battery life Imag e Storage [...]

303 9 Appendix Warranty Policy All PENTAX cameras purchased through authorized bona f ide photographic distribution channels are guaranteed against de fects of material or workmanship for a period of twelve months from date of purchase. Service will be rendered, a nd defective parts will be replac ed without cost to you w ithin that period, provide[...]

304 9 Appendix • T his warranty policy does not affect the customer’s statutory righ ts. • The lo cal warranty policies available from PENT AX distributors in some countries can supersede this warranty poli cy. Therefore, we recommend that you review the warrant y card supplied with yo ur product at the time of purchase, or cont act the PENTA[...]

305 9 Appendix For customers in USA STATEMENT OF FCC COMPLIANCE This device complies with Part 15 of the FCC Rules. Operation is sub ject to the following two conditi ons: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes [...]

306 9 Appendix Declaration of Conformity According to 47CFR, Parts 2 and 15 for Class B Personal Comp uters and Peripherals We: PENTAX Imaging Company A Division of PENTAX of Americ a, Inc. Located at: 600 12 Street, Suite 300 Golden, Colorado 80401 U.S.A. Phone: 303-799- 8000 FAX: 303-790- 1131 Declare under sole responsibi lity that the product i[...]

307 9 Appendix Information for Users on Collection and Disposal of Old Equipment and Used Batter ies 1. In the European Union These symbols on the products, packaging and/or accompanying documents mean that used electrical and electronic equipments and batterie s should not be mixed with general household waste. Used electrical/electron ic equipmen[...]

308 9 Appendix Index Symbols A Mode ................ ...... 16, 64 I button .................. ... 61, 63 Q Mode ..................... 16, 64 Q button .................... 60, 62 [ A Rec. Mode] Menu .............. ................ .... 69, 291 [ W Setting] Menu ....... 71, 293 9 Green Mode ................. 86 i Delete ................. 162, 176 f [...]

309 9 Appendix Brightness filter ......... ....... 192 Brightness Level .............. 248 Built-in Memory ............... 215 Burst Shooting ....... .......... 104 C Calendar display ............. . 166 Camera shake ............. 25, 89 Candlelight Mode .............. 90 Capture Mode Palette ....... 79 Changing volume ........... . 231 Charging a [...]

310 9 Appendix H HDMI ........... ................ .... 245 High contrast filter ........... 192 Highlight Correction ......... 134 Histogram .......... ................ 33 Hometown ............. .... 54, 237 I Image Rotation ............ .... 172 Image Storage Capa city .. 299 Image Tone ................. .... 124 Image/Sound Copy ...... .... 215 [...]

311 9 Appendix Press halfway (shutter r elease butt on) ..... 76 Product registration ......... 262 Program Mode ................ ... 85 Protect Z ..... ................ . 180 Provided software ..... ....... 258 PTP ................ ................ . 264 R Rec. Mode Menu ....... 69, 291 Recorded Pixels ...... 125, 152 Recording movies ............[...]

312 9 Appendix W Waterproof and Dustproof .............. ................ .......... 148 White Balance ................ . 128 Windows ............ .............. 259 World Time ...................... 237 Z Zoom xw ..................... ... 88[...]

Memo Thank you for purchasing this PENTAX Digital Camera. Please read this manual before usin g the camera in order to get the most out of all the features and functions. Keep this manual safe, as it can be a valuable tool in helping you to unde rstand all the came ra’s capabilities. Regarding copyrights Images taken using the PENTAX Digital Came[...]

/ Digital Camera Operating Manual To ensure the be st performanc e fro m your camera, please read the Operating Manual before using th e camera. HOYA CORPORATION PENTAX Imaging Syst ems Division 2-35-7, Maeno-cho, Itabashi-ku, Tokyo 174-8639, JAPAN (http://www.pent ax.jp) PENTAX Europe Imagi ng Systems S.A.S. (European Headqu arters) 112 Quai de Be[...]