Philips 7206890100R00 инструкция обслуживания

Safety warnings . . . . . . . . . . . . . . . . . . . . . . . . . 2 Getting started . . . . . . . . . . . . . . . . . . . . . . . . . 3 Use of the remote control RC4401/01 . . . . . . 5 Use of the option key . . . . . . . . . . . . . . . . . . . 7 K eys at the right side of the TV . . . . . . . . . . . . 7 Switch the TV on . . . . . . . . . . . . .[...]

2 EN Safety warnings Do not insert the pow er plug in a wall socket or hang the TV to the wall befor e all connections are made. • Place or hang the TV wherev er you want, but mak e sure that air can cir culate freely thr ough the ventilation slots. • Do not install the TV in a confined space such as a book case or a similar unit. • T o prev [...]

Befor e you s witch on your TV , connect all your peripheral equipment. See T o make video and audio connections, p . 37. There is a wide range of audio and video equipment that can be connected to y our TV . See T o mak e audio and video connections, p. 37. EXT1 can handle CVBS, RGB and Audio L/R; EXT2 can handle CVBS, S-VIDEO , RGB, Audio L/R; EX[...]

< Insert the aerial plug firmly into the aerial socket x at the bottom of the TV . Getting started (Continued) EN 4 - T o connect a camera, camcorder or game, see T o mak e video and audio connections, p. 38. - T o connect a headphone, see T o make video and audio connections, p . 38. - T o connect a USB device, see Multimedia bro wser , p. 32. [...]

B Standby Press to s witch the TV from or to standby mode. When switched to standby , a red indicator on the TV lights up. TV Press to select TV mode. D VD STB VCR AUX Press one of these k eys to set your r emote control to operate a peripheral device. See Audio and Video equipment ke ys, p. 47. DEMO Press to s witch the Demo menu on or off. Colour[...]

+P- Channel selection - to br owse thr ough the TV channels and sources stor ed and mark ed in the Fa vourite channels lists; - to select a page in T eletext mode; - to quickly br owse through the lists in the menus; - to switch the TV on from standby mode. 0/9 Digit k eys T o select a TV channel between 0 and 999. AV Select your peripherals See In[...]

EN 7 a Use of the OPTION k ey In case your r emote is lost or brok en, apart from channel selection and volume adjustment, y ou can still change some of the basic settings with the k eys at the side of your TV . < Press the po wer s witch B to switch the TV on or off. The MENU k ey can be used to summon the TV menu without the remote contr ol. &[...]

EN 8 Note : if the TV has already been installed bef ore and/or you want to change the First time installation settings, proceed with Use of the TV menu settings, p. 12. Switch the TV on < Press the po wer s witch B at the side of the TV . > An indicator on the front of the TV lights up and the screen comes on. < If the TV is in standby mo[...]

After the W elcome screen y ou are ask ed to select a language of the TV's on-screen menus. The text of the header and the info on screen contin uously change language. 1. Press the cursor up/do wn to highlight your language. 2. Press the OK k ey on the remote contr ol. 3. Follow the instructions on scr een to proceed. EN 9 First time installa[...]

By means of sev eral split screens/full screens y ou are prompted to select y our preferr ed picture, sound and ambilight settings, to finally arriv e at a complete setting which satisfies you. 1. Press the gr een colour key on y our remote contr ol to enter the Settings assistant menu. 2. Select your Location with the cursor up/do wn. > If you [...]

A lot of guiding instructions, help texts and messages will be displa yed on your TV when you use the menus or when y ou tr y to ex ecute an action. Read the help texts which are being displa yed on the specific item highlighted. The colour k eys at the bottom of the scr een refer to the differ ent actions which ma y be executed. Press the cor resp[...]

EN 12 Info TV menu TV settings Settings assistant Reset to standard Picture Sound Ambilight TV settings Features Installation Exit Ho w to na vigate through the menus (contin ued) Use of the TV men u settings 1. Press the MENU/BR O WSE k ey on the r emote control. > The main menu appears on the scr een. 2. Select TV menu and pr ess the cursor ri[...]

EN 13 Each time you'v e made a selection, press the green k ey to confirm your selection. 1. Select Settings assistant and pr ess the cursor right. > By means of sev eral split screens/full screens y ou are prompted to select y our preferr ed Picture and Sound settings to finally arriv e at a complete setting which satisfies you. See First [...]

The picture men u contains the settings that affect the quality of the picture. 1. P ress the MENU/BR O WSE k ey on the r emote control. > The main menu appears. 2. Select TV menu and pr ess the cursor right. > The TV menu is moved to the left. 3. Select TV settings and pr ess the cursor right. > The TV settings menu is moved to the left p[...]

Custom tint (only when Tint is set to Custom) Fine tunes the white point ( WP ) and black lev el ( BL ) of the picture. 1. Select Custom tint and press the cursor right. 2. Use the cursor k eys to select and adjust the settings of: R-WP : allows you to customise the colour tint by adjusting the red whitepoint of the pictur e . G-WP : allows you to [...]

MPEG artefact reduction MPEG artefact reduction On smoothens the transitions on digital content. < Select On or Off . Colour enhancement Automatically contr ols green enhancement and blue stretch. It mak es the colours more vivid. < Select Off , Minimum , Medium or Maximum . Active contr ol The TV continuously measures and cor rects all incom[...]

The sound menu contains the settings that affect the quality of the sound. 1. Press the MENU/BR O WSE k ey on the r emote control. > The main menu appears. 2. Select TV menu and pr ess the cursor right. > The TV Menu is moved to the left. 3. Select TV settings and pr ess the cursor right. > The TV settings menu is moved to the left panel. [...]

Headphone volume Allows y ou to control the le vel of sound through the headphones. A VL (Automatic V olume Lev eler) Automatically r educes the volume diff erences betw een channels and programmes, pr oviding a more constant ov erall lev el. This will also reduce the dynamics of sound. Delta volume Allows y ou to corr ect for an y permanent volume[...]

The ambilight menu contains the settings for contr olling the ambient lighting. Using ambient light gives a mor e relaxed viewing experience and impr oves per ceived picture quality . Analysis of the pictur e content adapts the colours continuousl y . But the lights can also be set to any fix ed colour and many shades of white. 1. Press the MENU/BR[...]

Mode Allows y ou to choose for constant backgr ound lighting or for backgr ound lighting that matches the images display ed on the screen. < Use the cursor k eys to select Colour , Relaxed, Moderate or Dynamic. - Colour : this will show constant light according to the settings in the Colour menu below . It allows man ual fine tuning in the next [...]

Custom colour Allows y ou to customise the ambilight colour . < Select P alette to select the general colour of the light output. < Select Saturation to adjust the colourfulness of the light. Separation Allows y ou to define the stereo eff ect in case, Relaxed, Moderate or Dynamic has been selected in the Mode menu. < Select Off for a mono[...]

The Featur es menu allows you to contr ol the settings of special TV functions, features and accessory equipments. 1. Press the MENU/BR O WSE k ey on the r emote control. > The main menu appears. 2. Select TV menu and pr ess the cursor right. > The TV Menu is moved to the left. 3. Select F eatures and press the cursor right. > The Featur e[...]

Childlock With a 4-digit code, you are able to lock TV channels and external sources to pr event childr en from watching certain programmes. 1. Select Childlock . 2. Press the cursor right to enter the Childlock men u. 3. Enter your 4-digit code. 4. Select one of the menu items of the Childlock menu and press the cursor right: - Lock to lock all ch[...]

On timer From standb y , this automatically switches the TV to the specified channel number , at a specified time . 1. Select On timer . 2. Press the cursor right to enter the On timer men u. 3. Select Timer and pr ess the cursor right. 4. Select On . 5. Select Channel and then the TV channel you want y our TV to switch to on a selected time and da[...]

EN 25 25 Ho w to search f or and store TV channels This menu allows y ou to select your pref err ed menu language. 1. Select the language menu item and enter the list of a vailable languages with the cursor right. 2. Select your language with the cursor up/do wn. 3. Press the OK k ey to confirm your selection. Select your men u language This menu w[...]

EN 26 26 Ho w to search f or and store TV channels (Contin ued) Info TV menu Installation Channels Autom. installation Manual installation Rearrange Languages Country Channels Preferences Connections Decoder Factory settings Software upgrade After language and countr y ar e set correctly , you can now search f or and store the TV channels. < Sel[...]

This allows y ou to rename, to reshuffle and to uninstall or reinstall the stor ed channels. < Press the cor responding colour k eys and follow the on screen instructions. Reshuffle This allows y ou to change the order of the stor ed TV channels. 1. Select the channel you want to change place. 2. Press the y ellow colour ke y to move up a single[...]

This menu contains items that can set or adjust various special TV functions and that will typically be accessed only occasionally . Select your location This allows y ou to select the location of your TV . If you choose f or Shop it will result in fix ed settings of picture, sound and ambilight. The location Home will give full flexibility to chan[...]

EN 29 This allows y ou to select the peripheral equipment you ha ve connected to the audio and video connectors. 1. Select Connections . 2. Press the cursor right. 3. Select the input to which the peripheral equipment is connected. > When you select EXT1 , EXT2 , EXT3 , HDMI 1 , HDMI 2 , Side or Digital Audio In , a list appears which allows y o[...]

EN 30 Reset the Factory settings This allows y ou to upgrade your TV software using a USB device. USB de vice upgrade It is possible to initiate an upgrade procedur e from a USB device (befor e you start up the TV). The memor y de vice must be filled with the appr opriate upgrade image (and structure) which can be f ound on the www . philips.com/so[...]

Create y our fa vourite list This allows y ou to create up to f our fa vourite channels lists with your pr eferred TV channels. For example, each member of your famil y can create his/her o wn fa vourite list. 1. Press the FA V ke y . > The last selected channel list appears. 2. Use the cursor k eys to select a channel. 3. Press the OK k ey to d[...]

The Multimedia bro wser lets you displa y pictures, movies or pla y audio files stored on a USB device. The Multimedia bro wser application is inv oked fr om the main menu. -Following file f ormats can be reproduced: for pictur es: JPEG for audio: MP3, MP3 Pro , LPCM for video: MPEG1, MPEG2 - Only F A T/DOS-formatted memory devices are supported. -[...]

Multimedia Bro wser menu 1. Insert a USB device. 2. Select the USB device under Multimedia with the cursor up/down. > The Multimedia bro wser allows you to br owse content stored on the inserted USB device. > The 2-panel bro wser will be shown with the left panel containing the content types (Music, Pictures, Movies). > The right panel wil[...]

Function k eys at the bottom of the scr een Details to displa y a description of the selected file or directory T ransitions to select if you lik e to apply a transition during a slide show Slide time to select the duration a picture will be displa yed in a slide show Rotate to rotate a pictur e Repeat one/all to repeat the pla yback of a music fil[...]

Most TV channels broadcast information via teletext. This TV has a 1200 pages memor y that will store most broadcasted pages and subpages to r educe waiting time . After each programme change, the memor y is r efreshed. < Press b to switch the teletext on. > The main index page appears on the scr een. Select a T eletext page < Enter the de[...]

Hypertext With h yper text you can quickl y jump to a pagenumber or search f or a specific word shown on the cur rent teletext page. 1. Press the OK k ey to highlight the first wor d or a number on the page. 2. Use the cursor up/down, left/right to select any other w ord or number y ou want to search f or . 3. Press the OK k ey to confirm. The sear[...]

EN 37 T o mak e video and audio connections Tip : use the inputs that are a vailable on your equipment that pr ovide the best video or audio performance, as below . Note : your TV comes with all types of connectors with the exception of the D VI connector but some of your equipment ma y be equipped with this type. In this case you'll need a D [...]

T o mak e video and audio connections - Side panel o ver view EN 38 Camera, Camcorder , Game 1. Connect your camera, camcor der or game as shown. 2. Connect to VIDEO 2 and A UDIO L 3 fo r mono equipment. For ster eo equipment also connect A UDIO R 3 . S-VHS quality with an S-VHS camcorder is obtained by connecting the S-VHS cables with the S-VIDEO [...]

Pr Pb Y R B G AUDIO L/R H V EXT2 EXT1 EXT3 COMMON INTERFACE 75 HDMI 1 HDMI 2 ANTENNA 75 o DIGITAL AUDIO IN o DISPLAY SYNCHRONIZED o o o o o AUDIO OUT LR OUT AUDIO DIGITAL Pr Pb Y R B G AUDIO L/R H V EXT2 EXT1 EXT3 FACE 75 HDMI 1 HDMI 2 ANTENNA 75 o DIGIT AL AUDIO IN o DISPLAY SYNCHRONIZED o o o o o AUDIO OUT LR OUT A U DI O DIGIT AL CE AUDIO OUT DI[...]

EN 40 Connect a VCR or D VD r ecorder With a eurocab le 1. Connect the aerial cables 1 and 2 as shown. 2. Connect the eurocable 3 as sho wn. 3. Mak e your selection of the sour ce to which the VCR has been connected in the Installation menu, Select your connections, p . 29. With the aerial cable only 1. Connect the aerial cables 1 and 2 as shown. 2[...]

EN 41 Note : you can not r ecord signals from equipment connected to the YPbPr input. Connect two VCRs or VCR and D VD r ecorder With eurocab les 1. Connect the aerial cables 1 , 2 and 3 as shown. 2. Connect your VCRs or D VD-recorder to EXT1 and 2 with the eur ocables 4 and 5 . 3. Select the equipment you ha ve connected in the Installation menu, [...]

EN 42 Connect a D VD pla yer , Cable bo x or game console Note : in case of any pr oblems, see Annex 5: Issues ref erring to connected peripherals with a HDMI connector , p. 56. With a HDMI connector HDMI is the leading new standar d for Digital video and audio interconnection. 1. Connect your equipment with the HDMI connector . 2. Select the equip[...]

EN 43 Connect a D VD pla yer , a satellite r eceiver or Cab le box With Component Video Connectors 1. Connect the three separate component video cables 1 to the YPbPr jacks on the D VD pla yer and to the Y , Pb and Pr jacks of EXT3 on the TV . 2. Connect the audio cable 2 to the digital out of the equipment and to the DIGIT AL AUDIO IN connector of[...]

EN 44 Connect a PC PC equipped with a V GA connector : 1. Use a V GA to RGB H/V cable 1 to connect to the RGB H/V connectors of your TV . 2. Connect the audio cable 2 to the AUDIO R (right) and L (left) inputs of the TV . 3. Select the equipment you ha ve connected in the Installation, Select your connections, p . 29. PC equipped with a D VI connec[...]

EN 45 Connect a Home Cinema amplifier Digital Home Cinema amplifier < Connect a digital Home Cinema amplifier to the DIGIT AL AUDIO OUT connector 1 at the bottom of the TV . Analogue Home Cinema amplifier < According to the type of connector cables and the connector input a vailable on your Home Cinema amplifier , connect your receiv er to th[...]

EN 46 46 Select connected equipment Befor e operating your connected equipment y ou hav e to make a selection in the Installation, Select your connections menu, p . 29. 1. Press the MENU/BR O WSE key . 2. Select TV menu and pr ess the cursor right. 3. Select Installation . 4. Press the cursor right. 5. Select Connections . 6. Press the cursor right[...]

Most of the audio and video equipment from our range of products can be operated with the r emote control of y our TV . Press one of the k eys after you pr essed one of the mode ke ys ( DV D , STB , VCR , AUX ) according to the equipment you want to operate with this remote contr ol. See Use of the Remote control, p. 5-6. B to switch to standby ® [...]

48 EN Symptom P ossible cause/Remedy No picture < V erify if the supplied cables are connected pr operly . (The aerial cable to the TV , the other aerial to your recor der , the power cables, ..) < V erify if you selected the corr ect source. < V erify if the child lock has been switched off. P oor pictur e < V erify in the Manual insta[...]

Annex 1: T o set the remote contr ol to work a Philips D VD or D VD/R 49 EN Y our TV remote contr ol gives you the opportunity to contr ol your Philips D VD or D VD/R. 1. Press the DV D mode ke y for 4 seconds until the LED lights up constantly 2. Enter the code 500 with the digit k eys for a Philips D VD pla yer . Enter the code 542 with the digit[...]

Introduction Philips offers softwar e upgrade capability for y our TV using portable memor y . After you ha ve completed a softwar e upgrade, your TV will typically perform better . What impro vements are made depends on the upgrade software y ou are using as well as the softwar e your TV contained befor e the upgrade. Y ou can execute the softwar [...]

Annex 2 (Continued) EN 51 Automatic software upgrade pr ocedure 1. Switch off your TV and remov e all memor y devices. 2. Insert the USB por table memory that contains the downloaded softwar e upgrade. 3. Switch on your TV with the power k ey B at the side of the TV . 4. At startup the TV will scan the USB portable memor y until it finds the update[...]

Manual softwar e upgrade pr ocedure For a manual softwar e upgrade copy the “autorun.upg” file in a directory called “Upgrades” located in the root of the USB portable memor y . Y ou can rename the file if y ou lik e but k eep the .upg extension. 1. Insert the por table memory that contains the downloaded software upgrade. 2. Select Softwar[...]

Introduction This document explains how to mak e a Philips slideshow file with background audio . Be a ware that the content of this document is addressing technical or softwar e skilled users. T o start the slideshow open the slideshow file in the Multimedia bro wser of your TV . 1. Press the MENU/BR O WSE k ey on the r emote control after ha ving[...]

Annex 3 (Continued) 54 EN Supported XML-tags The following table giv es a description of the XML syntax. T ag Name philips-slideshow title audio slide-duration slides slide Use mandator y optional optional optional mandator y optional Description Philips slideshow signatur e including the version. The title of the pla ylist. The audio-URL following[...]

Digital Camera Issues If a USB connection between y our digital camera and the TV isn’ t working, y ou can tr y the solutions below to r esolve y our problem. - Mak e sure your digital camera is switched on and v erify if the configuration of your digital camera is corr ect (see the manual of y our digital camera for mor e information). - Some di[...]

Annex 5 - Issues r eferring to connected peripherals with a HDMI connector 56 EN The HDMI IN connector allows the follo wing TV and monitor display modes: HD Standard Definition TV (SDTV) 640x480i 720x480i 720x576i Enhanced Definition TV (EDTV) 640x480p 720x480p 720x576p High Definition TV (HDTV) 1920x1080i 1280x720p PC V GA 640x480 SV GA 800x600 X[...]

active contr ol ........................... 16 ambilight .................................... 19 antenna ......................................... 4 audio receiv er .......................... 45 audio equipment k eys ............. 47 auto format ............................... 16 automatic installation.............. 26 a vl (audio volume lev eller)[...]

58 EN R The packaging of this product is intended to be recycled. Apply to the local authorities for corr ect disposal. Disposal of your old pr oduct Y our product is designed and manufactur ed with highly quality material and components, which can be recycled and r eused. When this crossed-out wheeled bin symbol is attached to a product, it means [...]