Philips CCC 134AT инструкция обслуживания

CCC134A T CCC194A T Color TV with built-in VCR Owner’ s Manual Read this manual first! Congratulations on purchasing this Philips product. We’ve included everything you need to get started. If you have any problems, Philips Representatives can help you get the most from your new product by explaining: • Hookups, • First Time Setup, and • [...]

Once your PHILIPS purchase is registered, you’re eligible to receive all the privileges of owning a PHILIPS product. So complete and return the Warranty Registration Card enclosed with your purchase at once. And take advantage of these important benefits. Return your Warranty Registration card today to ensure you receive all the benefits you’re[...]

Introduction 3 Welcome to your TV/VCR owner ’ s manual. This manual describes two models: CCC134 and CCC194. The models may look different, but they operate exactly the same. The CCC134 is illustrated in this manual. The features in this manual apply to both models. Features • Automatic Head Cleaner • Automatic Tracking Adjustment • Blue Ba[...]

4 Table of Contents Setting Up Your TV/VCR Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Before Using the TV/VCR . . . . . . . . . . . . . [...]

Before Using the TV/VCR 5 Putting Batteries in the Remote Control 1 Remove the battery compartment lid on the bottom of the remote control by pressing in the tab, then pulling up the lid. 2 Place two AA batteries inside the battery compartment with their + and – ends aligned as indicated. 3 Replace the battery compartment lid. Using the Remote Co[...]

6 Hooking Up the TV/VCR Hooking Up Your TV/VCR With a Cable Signal or Outdoor Antenna Hooking Up Your TV/VCR With a Cable Box To view any channel, set the TV/VCR to the Cable Box output channel (channel 03 or 04). Then, select channels at the Cable Box. 1 Hook up your TV/VCR using one of the connections shown. A. B. Hooking Up Your TV/VCR With an I[...]

Hooking Up the TV/VCR (cont’d) 7 • Before connecting an antenna or cable signal to the ANT(enna) Jack, make sure the pin is not bent. If the pin is bent, straighten it as illustrated, then connect the antenna or cable signal to the ANT(enna) Jack. • A rod antenna (not supplied) is available from Philips Service Solutions Group. The part numbe[...]

POWER EJECT SPEED MEMORY CABLE /DBS COMBI SMART PICTURE SLOW F.ADV INDEX SKIP SLEEP/ WAKE UP 12 3 45 6 78 9 0 CH. VOL. ALT.CH REW PLAY F.FWD REC /OTR PAUSE /STILL STOP MUTE TRACKING VCR PLUS+ ENTER SEARCH VAR.SLOW MENU STATUS /EXIT FM CLEAR 8 Turning On the TV/VCR Before you turn on the TV/VCR, make sure batteries are in the remote control and you [...]

POWER EJECT SPEED MEMORY CABLE /DBS COMBI SMART PICTURE SLOW F.ADV INDEX SKIP SLEEP/ WAKE UP 12 3 45 6 78 9 0 CH. VOL. ALT.CH REW PLAY F.FWD REC /OTR PAUSE /STILL STOP MUTE TRACKING VCR PLUS+ ENTER SEARCH VAR.SLOW MENU STATUS /EXIT FM CLEAR Language Selection 9 Follow the steps below to change the language of the on-screen displays and menus. 3 Pre[...]

10 Automatic Channel Setup Although the TV/VCR may automatically memorize the channels you receive when you turn it on for the first time, you may set up channels again by following the steps below. 1 Press the COMBI button, then press the MENU button. 2 Press the PLAY/ ▲ button or the STOP/ ▼ button to select PRIM. SETUP, then press the F.FWD/[...]

Automatic Channel Setup (cont’d) 11 4 Press the F.FWD/ B button or the REW(ind)/ { button to select SAVED (to add that channel) or DELETED (to delete that channel). Repeat steps 3-4 to add or delete other channels. 5 Press the STATUS/EXIT button. Programming of the last channel you selected will appear. 3 Press the CH(annel) o o / p p buttons or [...]

12 Setting the Clock • Entries that do not match the TV/VCR’s calendar will cause a question mark (?) to appear on the screen. • To make corrections while you are setting the clock, press the CLEAR button until the space for the num- ber you want to correct is flashing. Then enter the correct number. Helpful Hints There are three ways to set [...]

Setting the Clock (cont’d) 13 5 Press two Number buttons for the hour(s) and two Number buttons for the minute(s). Then press 1 for AM or 2 for PM. For example, for 9:30 PM, press 09, 30, 2. SET MANUAL CLOCK TIME 09 : 30 PM MONTH – – / – – / – – – – TO CORRECT PRESS CLEAR TO END PRESS EXIT 6 Press two Number buttons for the month,[...]

14 Setting the Clock (cont’d) Automatic PBS Channel Selection 4 If ON appears beside AUTO CLOCK, press the MENU but- ton. If OFF appears beside AUTO CLOCK, press the PLAY/ ▲ button or the STOP/ ▼ button to select AUTO CLOCK, then press the F.FWD/ B button so that ON appears to the right of AUTO CLOCK. Then, press the MENU button. 1 Press the [...]

Setting the Clock (cont’d) 15 7 When the TV/VCR finds the PBS channel, the time will appear on the screen. Press the STATUS/EXIT button. 6 NOW SEARCHING flashes on the TV/VCR screen. ● If CANNOT FIND CLOCK DATA flashes on the TV/VCR screen, you will be prompted to turn off the TV/VCR. Turn off the TV/VCR. Leave it off for several min- utes. Whe[...]

16 Setting the Clock (cont’d) Manual PBS Channel Selection 4 If ON appears beside AUTO CLOCK, press the MENU button. If OFF appears beside AUTO CLOCK, press the PLAY/ ▲ button or the STOP/ ▼ button to select AUTO CLOCK, then press the F.FWD/ B button so that ON appears to the right of AUTO CLOCK. Then, press the MENU button. 1 Press the COMBI[...]

Setting the Clock (cont’d) 17 8 When the TV/VCR finds the clock data, the time will appear on the screen. Press the STATUS/EXIT button. 6 Use the Number buttons to select your PBS station. ● If CANNOT FIND CLOCK DATA flashes on the TV/VCR screen and you know another PBS channel, press the PLAY/ ▲ button or the STOP/ ▼ button to choose SELEC[...]

18 Daylight-Savings Time 4 Press the PLAY/ ▲ button or the STOP/ ▼ button to select DAYLIGHT SVG.TIME. Then, press the F.FWD/ B button so that ON or OFF appears beside DAYLIGHT SVG. TIME (Daylight Savings Time). 5 Press the STATUS/EXIT button. 1 Press the COMBI button, then press the MENU button. 2 Press the PLAY/ ▲ button or the STOP/ ▼ bu[...]

Time Zone 19 When you set the clock using AUTO CLOCK, specify your time zone. The TV/VCR will maintain the clock according to your time zone. • If you select AUTO at step 5, the TV/VCR will set the clock according to the time zone data of the PBS station it finds. • You cannot select SET TIME ZONE at step 4 if AUTO CLOCK is OFF. • You may nee[...]

2 Find your code. 20 Setting the Remote to Operate a Cable Box/DBS 4 Within 30 seconds, press the CABLE/DBS button. 3 Press the MUTE button. Your TV/VCR remote control may operate your Cable Box/DBS. If the remote control doesn ’ t operate your Cable Box/DBS now, follow the steps below to program your remote control. 1 Turn on your Cable Box/DBS.[...]

• Although the remote control that comes with your TV/VCR will work most Cable Boxes and DBSs, it is possible that the remote control will not operate your Cable Box or DBS. • The remote control may only operate some features of your Cable Box or DBS. For example, some Cable Boxes may only be turned on at the Cable Box. Therefore, the remote co[...]

22 Front Panel Cassette Compartment Insert a video cassette tape here. POWER Button Press to turn the power on or off. CHANNEL o / p Buttons Press to scan through the TV/VCR ’ s memorized channels. During tape playback, press to adjust the track- ing. Details are on page 57. Press the CHANNEL o button and the VOLUME p button on the TV/VCR at the [...]

Rear Panel 23 ANT(enna) Jack Connect your antenna or cable here. Details are on page six. Antenna Hole Connect the stem of an indoor antenna here. Details are on page six. AC Power Cord Connect to a standard AC outlet to supply power to the TV/VCR. ANT . CCC134[...]

EJECT Button Press to eject the tape. POWER EJECT SPEED MEMORY CABLE /DBS COMBI SMART PICTURE SLOW F.ADV INDEX SKIP SLEEP/ WAKE UP 12 3 45 6 78 9 0 CH. VOL. ALT.CH REW PLAY F.FWD REC /OTR PAUSE /STILL STOP MUTE TRACKING VCR PLUS+ ENTER SEARCH VAR.SLOW MENU STATUS /EXIT FM CLEAR Number Buttons Use to select channels and to program TV/VCR functions ([...]

POWER EJECT SPEED MEMORY CABLE /DBS COMBI SMART PICTURE SLOW F.ADV INDEX SKIP SLEEP/ WAKE UP 12 3 45 6 78 9 0 CH. VOL. ALT.CH REW PLAY F.FWD REC /OTR PAUSE /STILL STOP MUTE TRACKING VCR PLUS+ ENTER SEARCH VAR.SLOW MENU STATUS /EXIT FM CLEAR • Press the COMBI button before pressing other TV/VCR buttons; press the CABLE/DBS button before press- ing[...]

TO ADJUST PRESS { / B 26 Adjusting the Picture Controls Follow these steps to adjust the TV/VCR ’ s brightness, picture, color, tint, and sharpness. 1 Press the COMBI button, then press the MENU button. 2 Press the PLAY/ ▲ button or the STOP/ ▼ button to select the desired control (BRIGHTNESS, for example). 3 Press the REW(ind)/ { button or t[...]

EARPHONE AUDIO VIDEO STOP REW PLAY F .FWD CHANNEL VOLUME POWER REC OTR EJECT Adjusting the Picture Controls (cont’d) 27 Decrease Increase BRIGHTNESS decreased brightness increased brightness PICTURE decreased contrast increased contrast COLOR paler more brilliant TINT more purple more green SHARPNESS softer clearer Press the REW(ind)/ { button to[...]

• You cannot view closed captions during recording or tape playback if COUNTER ONLY is ON. Details are on pages 54-55. Helpful Hint 1 Press the COMBI button, then press the MENU button. Current Tape Function Time Channel Counter and Counter Memory Tape Speed 12:00 AM STOP CH10 SLP M 1:23:45 A status display will appear when you press the STATUS/E[...]

POWER EJECT SPEED MEMORY CABLE /DBS COMBI SMART PICTURE SLOW F.ADV INDEX SKIP SLEEP/ WAKE UP 12 3 45 6 78 9 0 CH. VOL. ALT.CH REW PLAY F.FWD REC /OTR PAUSE /STILL STOP MUTE TRACKING VCR PLUS+ ENTER SEARCH VAR.SLOW MENU STATUS /EXIT FM CLEAR Playing 29 • If the tape you want to play is already in the TV/VCR, turn on the TV/VCR power, then press th[...]

POWER EJECT SPEED MEMORY CABLE /DBS COMBI SMART PICTURE SLOW F.ADV INDEX SKIP SLEEP/ WAKE UP 12 3 45 6 78 9 0 CH. VOL. ALT.CH REW PLAY F.FWD REC /OTR PAUSE /STILL STOP MUTE TRACKING VCR PLUS+ ENTER SEARCH VAR.SLOW MENU STATUS /EXIT FM CLEAR 30 Recording • You cannot record one channel while watching another. • Recording options are on pages 31-[...]

One-Touch Recording 31 A One-Touch Recording (OTR) is an immediate timed recording from 30 minutes to eight hours long. Before you begin, make sure: ● Channels are set. Details are on page 10. ● There is a tape in the TV/VCR. The record tab must be intact. 1 Press the COMBI button, then use the CH(annel) o o / p p buttons or the Number buttons [...]

32 Rerecording (Tape Duplication) • Unauthorized recording of copy- righted television programs, video tapes, or other materials may infringe on the rights of copyright owners and violate copyright laws. • If a program has copyright protec- tion, it may not record clearly. • Different brands of equipment may operate differently. • Make sure[...]

Defeat Recording 33 Follow the steps below to prevent accidental recording. 2 Press the PLAY/ ▲ button or the STOP/ ▼ button to select VCR SETUP, then press the F.FWD/ B button. 3 Press the PLAY/ ▲ button or the STOP/ ▼ button to select DEFEAT RECORDING, then press the F.FWD/ B button so that ON appears beside DEFEAT RECORDING. 4 Press the [...]

34 Timer Recording Follow the steps below to program the TV/VCR to record TV programs while you ’ re away from home. The TV/VCR will turn itself on, record, and turn itself off automatically. Before you begin, make sure: ● The clock is set. If not, CLOCK MUST BE SET appears, fol- lowed by the SET CLOCK menu. Details are on pages 12-17. ● Chan[...]

POWER EJECT SPEED MEMORY CABLE /DBS COMBI SMART PICTURE SLOW F.ADV INDEX SKIP SLEEP/ WAKE UP 12 3 45 6 78 9 0 CH. VOL. ALT.CH REW PLAY F.FWD REC /OTR PAUSE /STILL STOP MUTE TRACKING VCR PLUS+ ENTER SEARCH VAR.SLOW MENU STATUS /EXIT FM CLEAR ONE TIME PROGRAM PROGRAM 1 CHANNEL – – – TO CORRECT PRESS CLEAR TO END PRESS EXIT Timer Recording (cont[...]

POWER EJECT SPEED MEMORY CABLE /DBS COMBI SMART PICTURE SLOW F.ADV INDEX SKIP SLEEP/ WAKE UP 12 3 45 6 78 9 0 CH. VOL. ALT.CH REW PLAY F.FWD REC /OTR PAUSE /STILL STOP MUTE TRACKING VCR PLUS+ ENTER SEARCH VAR.SLOW MENU STATUS /EXIT FM CLEAR 36 Timer Recording (cont’d) Turn off the TV/VCR for the recording. Insert a tape in the TV/VCR. Leave the C[...]

1 With the TV/VCR on, press the COMBI button, then press the MENU button. 3 Press the PLAY/ ▲ button or the STOP/ ▼ button to select PROGRAM REVIEW, then press the F.FWD/ B button. The timer recording information for the program in the lowest numbered position will appear on the screen. If no timer record- ings are programmed, nothing will happ[...]

38 Setting Up the VCR Plus+ Programming System 1 First, fill in the boxes on this page. It will only take a few minutes, and you must do it if you want the VCR Plus+ programming system to work properly. Since the channel numbers of the stations you receive may not be the same as the station numbers, and since channel numbers differ from area to are[...]

Setting Up the VCR Plus+ Programming System (cont’d) 39 2 Now, compare the channel numbers you have written in the VCR PLUS+ CH. and CABLE/TV CH. columns. You ’ ll notice that some stations have VCR Plus+ and Cable/TV channel numbers that are the same, and other stations have channel numbers that do not match. Where the channel numbers DO NOT m[...]

POWER EJECT SPEED MEMORY CABLE /DBS COMBI SMART PICTURE SLOW F.ADV INDEX SKIP SLEEP/ WAKE UP 12 3 45 6 78 9 0 CH. VOL. ALT.CH REW PLAY F.FWD REC /OTR PAUSE /STILL STOP MUTE TRACKING VCR PLUS+ ENTER SEARCH VAR.SLOW MENU STATUS /EXIT FM CLEAR 1 Press the COMBI button, then press the VCR PLUS+/ENTER button. VCR PLUS+ PROGRAM PLUS CODE : – – – ?[...]

POWER EJECT SPEED MEMORY CABLE /DBS COMBI SMART PICTURE SLOW F.ADV INDEX SKIP SLEEP/ WAKE UP 12 3 45 6 78 9 0 CH. VOL. ALT.CH REW PLAY F.FWD REC /OTR PAUSE /STILL STOP MUTE TRACKING VCR PLUS+ ENTER SEARCH VAR.SLOW MENU STATUS /EXIT FM CLEAR Timer Recording With the VCR Plus+ Programming System (cont’d) 41 • To exit the VCR Plus+ programming sys[...]

POWER EJECT SPEED MEMORY CABLE /DBS COMBI SMART PICTURE SLOW F.ADV INDEX SKIP SLEEP/ WAKE UP 12 3 45 6 78 9 0 CH. VOL. ALT.CH REW PLAY F.FWD REC /OTR PAUSE /STILL STOP MUTE TRACKING VCR PLUS+ ENTER SEARCH VAR.SLOW MENU STATUS /EXIT FM CLEAR 42 Real-Time Counter Memory Follow the steps below to reset the real-time counter to zero at a tape location [...]

1 Press the COMBI button, then press the MENU button. Repeat Play 43 Follow the steps below to program the TV/VCR to play a tape over and over. 2 Press the PLAY/ ▲ button or the STOP/ ▼ button to select VCR SETUP, then press the F.FWD/ B button. 3 Press the PLAY/ ▲ button or the STOP/ ▼ button to select REPEAT PLAY, then press the F.FWD/ B [...]

44 A-B Repeat Play • To cancel A-B Repeat Play, set ONE TIME PLAY to ON. To set ONE TIME PLAY to ON, follow steps 2-3 above. Then, press the PLAY/ o button or the STOP/ p button to select ONE TIME PLAY. Press the F.FWD/ B button so that ON appears beside ONE TIME PLAY. Then, press the STATUS/EXIT button. • The end position (B) must be later on [...]

6 Press the STATUS/EXIT button to remove the menu. A- B REPEAT will appear on the screen. Beneath it, the letter A will flash beside the real-time counter. A-B REPEAT A 0:12:34 7 Play, fast forward, or rewind the tape to the position at which you want to begin playback. Stop the tape, then press the MEMORY button to set the start position (A). The [...]

POWER EJECT SPEED MEMORY CABLE /DBS COMBI SMART PICTURE SLOW F.ADV INDEX SKIP SLEEP/ WAKE UP 12 3 45 6 78 9 0 CH. VOL. ALT.CH REW PLAY F.FWD REC /OTR PAUSE /STILL STOP MUTE TRACKING VCR PLUS+ ENTER SEARCH VAR.SLOW MENU STATUS /EXIT FM CLEAR 46 Playback Options Forward and Reverse Searching (SP/LP/SLP) 1 During tape playback, press and release the F[...]

2 Press the PLAY/ o o button or the STOP/ p p button to select VCR SETUP, then press the F.FWD/ B B button. Blue Background 47 If you want the TV screen to be solid blue when a weak signal is received, set BLUE BACKGROUND to ON. The screen will be blue and the sound will be muted. Or, if you want to receive the weak signal, set BLUE BACKGROUND to O[...]

48 SmartLock SmartLock enables parents to prevent their children from watch- ing inappropriate material on TV. SmartLock reads the ratings for programming (except for news and sports programs, unedited movies on premium cable channels, and Emergency Broadcast System signals), then denies access to programming if the program ’ s rating meets or ex[...]

SmartLock (cont’d) 49 5 Press the PLAY/ ▲ button or the STOP/ ▼ button to select Movie Ratings or Parental Guidelines. Then, press the F.FWD/ B button. BLOCK > Movie Ratings Parental Guidelines SELECT KL CHOOSE B TO END PRESS EXIT 6 Press the PLAY/ ▲ button or the STOP/ ▼ button to select the rating you want to block. Then, press the F[...]

To change the access code, follow these steps. 50 SmartLock (cont’d) 1 Press the COMBI button, then press the MENU button. 2 Press the PLAY/ ▲ button or the STOP/ ▼ button to select SMARTLOCK. Then, press the F.FWD/ B button. SMARTLOCK Enter Your Access Code > SMARTLOCK REVIEW EXIT PRIM. SETUP VCR PROGRAM VCR SETUP PRESS B 3 Use the Number[...]

SmartLock (cont’d) 51 To check the SmartLock settings and see which ratings you have blocked, follow these steps. 1 Press the COMBI button, then press the MENU button. 2 Press the PLAY/ ▲ button or the STOP/ ▼ button to select REVIEW. Then, press the F.FWD/ B button so that the SmartLock settings appear. Ratings that are blocked will appear o[...]

52 Sleep Timer Use the sleep timer to program the TV/VCR to shut off in a cer- tain amount of time. 1 Press the COMBI button, then press the SLEEP/WAKE UP button. • To cancel the sleep timer, press the COMBI button, then press the SLEEP/WAKE UP button. Press the PLAY/ o button or the STOP/ p but- ton to select SLEEP, then press the REW(ind) / s s[...]

POWER EJECT SPEED MEMORY CABLE /DBS COMBI SMART PICTURE SLOW F.ADV INDEX SKIP SLEEP/ WAKE UP 12 3 45 6 78 9 0 CH. VOL. ALT.CH REW PLAY F.FWD REC /OTR PAUSE /STILL STOP MUTE TRACKING VCR PLUS+ ENTER SEARCH VAR.SLOW MENU STATUS /EXIT FM CLEAR Wake Up Timer 53 The Wake Up Timer turns on the TV/VCR automatically at a speci- fied time within the next 24[...]

POWER EJECT SPEED MEMORY CABLE /DBS COMBI SMART PICTURE SLOW F.ADV INDEX SKIP SLEEP/ WAKE UP 12 3 45 6 78 9 0 CH. VOL. ALT.CH REW PLAY F.FWD REC /OTR PAUSE /STILL STOP MUTE TRACKING VCR PLUS+ ENTER SEARCH VAR.SLOW MENU STATUS /EXIT FM CLEAR When you watch a program that has closed captions, you can access on-screen boxes containing the program ’ [...]

Closed Caption (cont’d) 55 HELLO HELLO WORLD WEATHER WORLD WEATHER NYL NYL LOS LOS LONDON LONDON CLOUD CLOUD RAIN RAIN CLOUD CLOUD 5 C 5 C 8 C 8 C 7 C 7 C 23:00 23:00 20:00 20:00 4:00 4:00 Standard Closed Captions Half-screen text 4 Press the STATUS/EXIT button. The type of closed captions you selected at step 3 will appear on the screen if avail[...]

Volume Bar Usually, the volume bar appears when you press the VOL(ume) o o / / / p p buttons. If you do not need it, set the VOLUME BAR to OFF. For example, when you watch a program that is being broadcast with closed captions, you may choose to set the VOLUME BAR to OFF so the captions can remain on the screen. The captions will remain on the scre[...]

Automatic Operation Features 57 The following playback features will always operate. Automatic Playback When you put a tape in the TV/VCR, the power will come on automatically. If the tape ’ s record tab is missing, playback will begin. If a timer recording is set, the power will not come on automatically when you insert a tape with the record ta[...]

POWER EJECT SPEED MEMORY CABLE /DBS COMBI SMART PICTURE SLOW F.ADV INDEX SKIP SLEEP/ WAKE UP 12 3 45 6 78 9 0 CH. VOL. ALT.CH REW PLAY F.FWD REC /OTR PAUSE /STILL STOP MUTE TRACKING VCR PLUS+ ENTER SEARCH VAR.SLOW MENU STATUS /EXIT FM CLEAR 58 SmartPicture The SmartPicture feature allows you to improve the TV/VCR ’ s pic- ture when viewing sports[...]

POWER EJECT SPEED MEMORY CABLE /DBS COMBI SMART PICTURE SLOW F.ADV INDEX SKIP SLEEP/ WAKE UP 12 3 45 6 78 9 0 CH. VOL. ALT.CH REW PLAY F.FWD REC /OTR PAUSE /STILL STOP MUTE TRACKING VCR PLUS+ ENTER SEARCH VAR.SLOW MENU STATUS /EXIT FM CLEAR FM Radio 59 2 1,3 1 Press the COMBI button, then press the FM button to select FM mode. The radio frequency a[...]

60 Reminder The channel number will remain on the screen at all times when you set REMINDER to ON. The exception is when closed cap- tioning is selected or during tape playback. Set REMINDER to ON or OFF by following the steps below. 1 Press the COMBI button, then press the MENU button. 2 Press the PLAY/ ▲ button or the STOP/ ▼ button to select[...]

POWER EJECT SPEED MEMORY CABLE /DBS COMBI SMART PICTURE SLOW F.ADV INDEX SKIP SLEEP/ WAKE UP 12 3 45 6 78 9 0 CH. VOL. ALT.CH REW PLAY F.FWD REC /OTR PAUSE /STILL STOP MUTE TRACKING VCR PLUS+ ENTER SEARCH VAR.SLOW MENU STATUS /EXIT FM CLEAR Index Search 61 This feature allows you to index the starting points of programs that you have recorded on a [...]

62 Helpful Hints Location For safe operation and satisfactory performance of your TV/VCR, remember the following: • Shield it from direct sunlight and keep it away from sources of intense heat. • Avoid dusty or humid places. • Avoid places with insufficient ventilation. Do not block the ventilation openings at the top and bottom of the TV/VCR[...]

Helpful Hints (cont’d) 63 The remote control is not available, or the remote control will not access the menu. • Use the buttons on the front of the TV/VCR to access the menu. You can not enter numbers (for example, to program a timer recording) using the front panel buttons. Details are on page 22. TV/VCR has no power. • Connect the power co[...]

AUDIO In Jack: jack on the front of the TV/VCR which records or receives audio from another source. Automatic Channel Setup: process in which the TV/VCR memorizes all available channels. Then, when you push the CHANNEL o / p buttons, you only scan through channels you receive. Bands: settings that allow you to tune channels. • Antenna – VHF (ve[...]

Specifications 65 General CRT: 13-inch in line gun (CCC134) 19-inch in line gun (CCC194) Television system: NTSC-M Closed caption system: Section 15.119, FCC (Federal Communications Commission) Standard Video Heads: Four heads Tape width: 1/2 inch (12.65 mm) Tape speed SP: 33.35 mm/sec. LP: 16.67 mm/sec. SLP: 11.12 mm/sec. Operating Temperature: 41[...]

66 Limited Warranty WHO IS COVERED? You must have proof of purchase to receive warranty service. A sales receipt or other document showing that you purchased the product is considered proof of purchase. WHAT IS COVERED? Warranty coverage begins the day you buy your product. For 90 days thereafter, all parts will be repaired or replaced, and labor i[...]

a-b repeat play . . . . . . . . .44-45 accessories . . . . . . . . . . . . . . .68 ant(enna) jack . . . . . . . . . . .6, 23 audio jack . . . . . . . . . . .7, 22, 32 automatic playback . . . . . . . . . . . . . . .57 rewind . . . . . . . . . . . . . . . .57 batteries . . . . . . . . . . . . . . . . . .5 blue background . . . . . . . . . . .47 brig[...]

IB8289E001 Printed In Malaysia 0EMN1809 / T5212UN * * * * * S UPPLIED A CCESSORIES O PTIONAL A CCESSORIES The following items are supplied with your TV/VCR; they are provided to help you use or set up your TV/VCR. The following additional items are not provided with your TV/VCR, but they are designed for use with your new TV/VCR. To order these opt[...]

IB8289E001 Printed In Mexico 0EMN01803 / T7262UN * * * * * S UPPLIED A CCESSORIES O PTIONAL A CCESSORIES The following items are supplied with your TV/VCR; they are provided to help you use or set up your TV/VCR. The following additional items are not provided with your TV/VCR, but they are designed for use with your new TV/VCR. To order these opti[...]