Philips FW930P2/2 инструкция обслуживания

1 Mini HiFi System FW930SR[...]

2 Deutsch ∂ÏÏËÓÈο Português Suomi Dansk Svenska Italiano Nederlands Español Français English Important notes for users in the U.K. Mains plug This apparatus is fitted with an approved 13 Amp plug. T o change a fuse in this type of plug proceed as follows: 1 Remove fuse cover and fuse. 2 Fix new fuse which should be a BS1362 5 Amp, A.S.[...]

3 English Français Español Nederlands Italiano Svenska Dansk Suomi Português ∂ÏÏËÓÈο Deutsch INDEX CLASS 1 LASER PRODUCT English ..................................... 5 Français ................................. 35 Español .................................. 65 Deutsch .................................. 95 Nederlands .................[...]

4[...]

5 English General Information • The typeplate (which contains the serial number) is located at the rear of the system. • Recording is permissible if copyright or other rights of third parties are not infringed. • This product complies with the radio interference requirements of the European Community . Environmental Information All unnecessar[...]

6 English PREP ARA TION Rear Connections Connections general The connections you make will depend upon the possibilities your audio equipment offers. Please refer to the user manuals for your other audio equipment first. Digital recordings (optical or coaxial) give the best performance in audio and usability (e.g. auto-track). (The digital optical [...]

7 English A AM Loop Antenna Connection Connect the supplied loop antenna to the AM ANTENNA terminal. Place the AM loop antenna far away from the system and adjust its position for the best reception. B FM Wire Antenna Connection Connect the supplied FM wire antenna to the FM ANTENNA 75 Ω terminal. Adjust the position of the FM antenna for the bes[...]

8 English CONTROLS FRONT STEREO FM BACK HSD REPEAT REC LW MW AM T.A. NEWS SOUND NA VIGATION NEWS! RDS DOLBY B NR DUB (HSD) REC ▲ ▲ D C 3 CHANGER MINI HIFI SYSTEM TIMER 60Hz 500Hz 250Hz 1KHz 2KHz 4KHz 8KHz VOLUME SHUFFLE PROGRAM INCREDIBLE SURROUND DYNAMIC BASS BOOST T APE CD PROG CLOCK/ TIMER SIDE A•B TUNER AUX PRESET STOP • CLEAR SEARCH ?[...]

9 English Controls on the system and remote control 1 ST ANDBY ON – to switch the system on or to standby mode. – to use for EASY SET . 2 DIGIT AL SOUND CONTROL (DSC) – to select the desired sound effect : OPTIMAL, CLASSIC, TECHNO, JAZZ, ROCK or VOCAL. 3 INCREDIBLE SURROUND – to switch on or off the surround sound effect. 4 n – to connect[...]

10 English • Digit 0 - 9 – (numbers consisting of two figures must be keyed in within 2 seconds). – to key in a CD track number (only for CDR operation) . ª REPEA T / INTRO SCAN – to repeat a CD track, a disc, or all available discs (only for CD operation) . – to play the first 10 seconds of each track (only for CDR operation) . º SHUFF[...]

11 English Easy Set EASY SET allows you to store all available radio stations and RDS stations automatically . 1 Press and hold ST ANDBY ON (on the system only) for 5 seconds ; when the system is in standby or demonstration mode. ™ “ EASY SET ” will be displayed, and followed by “ TUNER ” and then “ AUTO ”. ™ EASY SET will start sea[...]

12 English Switching the system to standby mode • Press ST ANDBY ON again or B on the remote control. ™ The system will switch to standby mode. Selecting the Source • Press the respective source selection button: CD , TUNER , T APE or AUX . ™ The display indicates the selected source. Note: – For an external source, make sure you have con[...]

13 English Y ou can change the digital sound setting level for all but CLASSIC with the JOG. • First select the DSC feature, then rotate the JOG until the desired digital sound setting level is reached. ™ The digital sound setting level will increase or decrease between level 1 and 5. Note: – For neutral setting, select CLASSIC and switch off[...]

14 English Loading the CD Changer 1 Press CD to select CD mode. 2 Press OPEN•CLOSE . ™ The CD carousel slides out. 3 Load a CD with the printed side up in the right tray . • Y ou can load another disc in the left tray . • T o load the third disc, press the DISC CHANGE button. ™ The CD carousel will rotate until the empty tray is ready for[...]

15 English CD – During programming, if no button is pressed within 20 seconds, the system will exit program mode automatically . Reviewing the program Reviewing of the program is possible only when playback is stopped. • Press PREV í or NEXT ë repeatedly to review the programmed tracks. • Press STOP•CLEAR Ç to exit review mode. Playing t[...]

16 English CD RECORDER General Information • With your Philips CD Recordable/ ReWritable Recorder , you can record, play and erase your own high-quality audio CDs, subject to legal restrictions on copying. Naturally , you will also be able to play all pre-recorded audio CDs. • For recording use, special audio discs must be used (for music only)[...]

17 English DISPLA Y messages Messages, as listed and explained here, may appear on the display for your guidance. GENERAL READING ............ reading disc information. NO DISC ............ no disc inserted, disc unreadable or disc inserted upside down. PROG FULL ....... program full. INSERT DISC …insert disc or insert disc in correct way . WRONG[...]

18 English CD RECORDER Switching the system ON 1 Plug the power cord supplied into the MAINS connector on the CD recorder , then into a mains socket. 2 Press ON/OFF . ™ The recorder is now in Standby mode. 3 Press any key to activate the recorder . Notes: – The CD recorder will automatically adjust to the local mains voltage. – When the CD re[...]

19 English CD RECORDER MANUAL RECORDING Preparing for manual recording 1 Press SOURCE repeatedly to select DIGIT AL, OPTICAL or ANALOG mode. • When Auto T rack is ON (default setting), track numbers will automatically be increased during recording. ™ T o switch off the Auto T rack function you have to enter Menu mode. If you wish to increase tr[...]

20 English ERASING CDRW DISCS For unfinalized CDRW discs only Y ou can erase: – one or more tracks from the end, – the entire disc. T o erase one or more tracks from the end 1 Press ERASE once . ™ The number of tracks and their total playing time appear on the display . ™ “ ERASE TRACK “ and “ PRESS RECORD ” appear on the display . [...]

21 English CD RECORDER Programming • Y ou can program up to 99 tracks to play in any desired sequence. • T racks can be programmed more than once, but each time counts as a track ( STEP ). 1 In Stop mode, press PROG on the remote control to enter Program mode. ™ The PROGRAM flag starts flashing and " PROGRAM " appear on the display [...]

22 English – When an artist’ s name has been stored for a certain track, the name will automatically be copied for the next track. The name can be confirmed by pressing STORE/MENU or a new name can be entered as described above. Erasing names 1 Select the TEXT ERASE submenu. ™ " TEXT ERASE " appears on the display . 2 Press ENTER to[...]

23 English Note: – For 'EASY SET' feature, please refer to page 11. T uning to radio stations 1 Press TUNER (BAND) to select TUNER mode. ™ “ TUNER ” will be displayed. A few seconds later , the current radio frequency will be displayed. 2 Press TUNER (BAND) again to select the desired waveband : FM, MW or L W . 3 Press TUNING à o[...]

24 English TUNER Receiving RDS Radio Station Ç RDS (Radio Data System) is a broadcasting service that allows FM stations to send additional information along with the regular FM radio signal. This additional information can contain: • ST A TION NAME: The radio station name is displayed. • FREQUENCY : The frequency of the radio station is displ[...]

25 English ™ If no RDS station is found in the first 5 presets after the search, the NEWS/T A function will be switched off. The display will show " NO RDS NEWS " or " NO RDS TA " and NEWS or TA flag will disappear from the display . • When NEWS/T A transmission is detected, the system will switch to T uner mode. ™ The NEW[...]

26 English Loading a tape • Press OPEN . • The tape deck door opens. • Load the tape with the open side downward and the full spool to the left. • Close the tape deck door . T ape Playback 1 Press T APE ( T APE 1•2 ) to select T APE mode. ™ “ TAPE 1 ” or “ TAPE 2 ” will be displayed. • Press T APE ( T APE 1•2 ) again to sele[...]

27 English T APE AUX/CDR KARAOKE Selecting External Equipment If you have connected the audio out terminals of the external equipment (TV , VCR, Laser Disc player , DVD player , or CD Recorder) to the AUX/CDR IN terminals, you can hear the enhanced sound from the system. • Press AUX to select AUX-CDR mode. ™ " CDR " will be displayed.[...]

28 English RECORDING Notes: – If you do not intend to record via the microphone, unplug the microphone to avoid accidental mixing with other recording source. – For recording, use only tape of IEC type I (normal tape) or IEC type II (Cr0 2 ). – The tape is secured at both ends with leader tape. At the beginning and end of tape, nothing will b[...]

29 English Dubbing tapes (from tape deck 1 to tape deck 2) 1 Press T APE ( T APE 1•2 ) to select tape deck 2. 2 Load the prerecorded tape into tape deck 1 and a blank tape into tape deck 2. • Make sure the tape in tape deck 1 has its full spool to the left. 3 (For T ape Deck 2 only) Press SIDE on the remote control to select the recording side.[...]

30 English View Clock Y ou can view the clock (if it is set) while the system is in standby mode or any source mode. It will be displayed for about seven seconds. • Press CLOCK/TIMER briefly (on the system only) . ™ “ 10:38 ” (the current time) will be displayed. ™ “ --:-- ” will be displayed if the clock is not set. Clock Setting The[...]

31 English T o switch off the TIMER 1 Press CLOCK/TIMER for more than 2 seconds. 2 Press Ç on the system to cancel the timer . ™ The timer is now switched off. ™ The display will show " OFF " and the TIMER flag disappears. T o start the TIMER again (for the same preset time and source) 1 Press CLOCK/TIMER for more than 2 seconds. 2 P[...]

32 English Specifications AMPLIFIER Output power ............... 2 x 100 W MPO / 2 x 50 W RMS (1) Signal-to-noise ratio ..................................... ≥ 75 dBA (IEC) Frequency response .......................... 40 – 20000 Hz, ± 3 dB Input sensitivity AUX/CDR In ......................................................... 500 mV Output Spe[...]

33 English Warning! Under no circumstances you should try to repair the set yourself as this will invalidate the guarantee. Do not open the set as there is a risk of electric shock. • If a fault occurs, check the points listed below before taking the system for repair . • Should any problems persist after you have made these checks, consult you[...]

34 English TROUBLESHOOTING CD Recorder System does not react. • CD Recorder is in standby mode. ™ Press any key to activate the CD Recorder . • The system is not switched on. ™ Ensure that the ON/OFF button is on. • Main cable is not connected. ™ Ensure that the mains cable is plugged in correctly . • Player does not react. ™ Switch[...]