Philips HDTV инструкция обслуживания

E User Manual Benützersanleitung Guida Utente Manual de uso Manuel de l’utilisateur TYPE NR. BDH5011 Philips Business Solutions G I S F E[...]

T ABLE OF CONTENTS 1. Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 2. FCC Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 3. Cleaning and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .[...]

3 User Manual BDH5011 1. IMPOR T ANT SAFETY INSTRUCTIONS W ARNING RISK OF ELECTRIC SHOCK DO NO T OPEN The lightning flash with arr ow-head symbol within a triangle is intended to alert the user to the presence of uninsulated danger ous voltage within the product enclosur e that ma y be of sufficient magnitude to constitute a risk of electric shocks[...]

• Do not place the unit on a bed, sofa, rug, or other similar surface. Never place the unit near or ov er a radiator or heat source. • Do not install unit in an enclosed area unless proper v entilation is pr ovided. • The unit should be operated from the type of pow er source indicated on the label. If the type of a vailable power is unkno wn[...]

5 User Manual BDH5011 2. FCC ST A TEMENT FCC Compliance Statement The equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of FCC rules. These limits are designed to pr ovide reasonable protection against harmful interf erence when the equipment is operated in a commercial envir onment. Thi[...]

6 User Manual BDH5011 3. CLEANING AND MAINTENANCE Cautions When Using the Plasma Display • Do not bring your hands, face or objects close to the ventilation holes of the plasma displa y . T op of plasma display is usually v er y hot due to the high temperature of exhaust air being released thr ough the ventilation holes. Burns or personal injurie[...]

• Do not use volatile substances such as insect spra ys, solvents and thinners on the cabinet. • Do not place anything made fr om rubber or PVC near the cabinet for extended periods of time. Av oid Still Images • Do not allow a still pictur e to be displa yed for extended periods of time. This can cause a permanent image to remain on the plas[...]

8 User Manual BDH5011 4. PRODUCT FEA TURES • Advanced Digital Imag e Processing Advanced digital processor with ada ptive motion de-interlacing conv erts all 15KHz signals into progr essive scan for a brighter , flick er free image. • Pull-Do wn for Film Scan Con version Built-in 3:2 pull-down pr ocessing can automatically detect and conv er t [...]

• D VI Digital Video Interface with HDCP (High-Bandwidth Digital Content Protection Pr otocol) Standard D VI interface supports the lastest in digital video peripherals equipped with D VI HDCP digital video output(s). This means that digital content can now be passed fr om sources such as a digital D VD play er , directly to this displa y without[...]

5. P A CKA GE CONTENTS Supplied Accessories Please verify that y ou receiv ed the following items with your package content: Plasma Displa y Remote Control User Manual Po wer Cable 10 User Manual BDH5011[...]

V GA Cable Batteries Optional Accessories The following accessories ar e a vailable and ma y be purchased fr om your local sales repr esentative: • W all Mount • Composite Video Cable (RC A) • S-Video Cable (Mini-Din) • Component Video Cable (RC A to RC A) • Audio Cable (RCA Cable) 11 User Manual BDH5011[...]

12 User Manual BDH5011 6. UNDERST ANDING Y OUR DISPLA Y 6.1 Fr ont View P ow er (Standby) Button T urns power on/off fr om standby mode . There is a 3-second wait betw een on/off cycles. Status LED: • Not Illuminated - No A C P ow er detected If the main pow er switch (rear of panel) is turned off, this LED will not illuminate . • Solid Y ellow[...]

13 User Manual BDH5011 6.3 Remote Contr ol 1. Standby P o wer On/Off Push this button to switch on the displa y from Standb y mode. Push it again to switch off to Standby mode. 2. Number K eypad These buttons are not a pplicable for this displa y . 3. QuickView This button is not applicable for this displa y . 4. PIP/POP Source Changes the input so[...]

14 User Manual BDH5011 16. Channel Up/Do wn These buttons are not a pplicable to this displa y . 17. Swap This button swaps the main and sub pictur e windows under PIP or POP modes. (See chapter 10.) 18. PIP P osition This button changes the PIP sub-window to 4 differ ent corner locations. (See Chapter 10.) 19. Input Select Press to select input si[...]

7. CONNECTING THE DISPLA Y 7.1 Connecting a D VD Pla y er Using Component Video Input 1. Connect the green-color ed (labeled as Y ) jack from the D VD to the green-colored Y1 -jack of the displa y . 2. Connect the red-color ed (labeled as PR or CR ) jack from the D VD to the red-colored PR1/CR1 jack of the displa y . 3. Connect the blue-colored (la[...]

7.2 Connecting a HDTV Decoder Set-T op Bo x Using Component Video Input 1. Connect the green (labeled as Y ) jack fr om the HDTV Set-top box to the gr een Y1 jack of the displa y . 2. Connect the red (labeled as PR or CR ) jack from the HDTV Set-top bo x to the red PR1/CR1 jack of the displa y . 3. Connect the blue (labeled as PB or CB ) jack from [...]

17 User Manual BDH5011 7.4 External Audio Connections Connecting External Amplified Speak ers 1. This displa y can be connected to an external set of amplified speak ers using the AUDIO OUT jacks located on the back of the displa y . In addition, this displa y is equipped with a small 3.5 mm phono style plug for remote turn-on a pplications that wi[...]

7.5 Connecting a PC Using RGB or D VI Video Input 1. For most PC’ s, connect the 15-pin D-Sub RGB connector from the back of the PC to the RGB-IN connector located on the back of the displa y . If you ha ve a PC that is equipped with a D VI (Digital Visual Interface), you ma y connect the PC D VI connector from the back of the PC to the D VI-In c[...]

19 User Manual BDH5011 7.6 RS-232 Remote Contr ol Connections RS-232 Serial T erminal Overview This displa y is equipped with an RS-232 serial terminal for using the displa y with computer controls. The RS-232 serial terminal conforms to the RS-232C interface specification. The computer will requir e a software a pplication (such as programming lan[...]

Notes: • T o connect a PC to the display’ s RS-232 port, you must use a straight-thr ough RS-232 cable where pins 2 (RX) and 3 (TX) ar e not re versed at one end. • If there is no data to be sent, then it is not necessar y to send the parameter signal. • If multiple commands ar e transmitted, make sure to wait f or the response for the firs[...]

Item Cmd Data Details W oofer 9D 00-01 00=Off, 01=On BBE 9E 00-01 00=Off, 01=On Surr ound 9F 00-02 00=Off, 01=3D Stereo , 02=3D Mono RF Input A0 00-01 00=Air , 01=Cable Full Search A1 00 00=initiate full search MTS A4 00-02 00=Stereo , 01=Mono, 02=SAP Zoom A5 00-05 00=16:9, 01=Panorama, 02=4:3, 03=Zoom1, 04=Zoom 2, 05=Zoom3 PIP/POP A7 00-03 00=Norm[...]

8. USING Y OUR DISPLA Y - BASICS 8.1 P o wering ON / OFF Using Fr ont Panel or Remote Contr ol 1. Mak e sure the displa y is plugged into the wall outlet and the main A C switch located at the rear side of the displa y is switched to ON position. If the power is plugged in and the A C switch is on, the ST A TUS LED will illuminate solid yello w . 2[...]

23 User Manual BDH5011 8.2 Selecting Signal Sour ce Using Fr ont Panel or Remote Contr ol 1. Press the INPUT button on the fr ont panel or the INPUT SELECT button on the remote contr ol. 2. Pressing the INPUT button will cycle the displa y through all a vailable input signal sources in the f ollowing order: Using Direct Input Selection Buttons 1. I[...]

24 User Manual BDH5011 8.3 Adjusting Sound V olume Using Fr ont Panel or Remote Contr ol 1. T o increase the sound volume, press V OLUME + on either the front panel of displa y or on the remote contr ol. 2. T o decrease the sound volume, press V OLUME - On either the front panel of displa y or on the remote contr ol. Using MUTE 1. If you temporaril[...]

9. USING WITH HDTV 9.1 Understanding HDTV What is Digital T elevision or DTV? Digital TVs are able to receiv e and displa y digital television br oadcasts, sent using one of the three following categ ories: HDTV (High Definition TV), EDTV (Enhanced Digital TV), and SDTV (Standard Definition TV). What is the Differ ence Between HDTV , EDTV , and SDT[...]

SDTV Interlaced scan method 1 V ertical Res. 2 : 480 lines Horizontal Res. 3 : 640 dots Aspect Ratio 4 : 4:3 Wide SDTV grade televisions and displa ys are capable of displa ying a maximum of 480 lines using interlaced scan method. All resolutions higher than 480 lines must be r educed to 480 lines in order to be displa yed. 1 Scan Mode Interlaced s[...]

10. AD V ANCED FUNCTIONS 10.1 Picture-In-Pictur e (PIP) / Side-b y-Side Picture (POP) Switch On PIP or POP Mode 1. Press the PIP button once on the r emote control to enable PIP mode. Pressing the PIP again will switch to POP mode. Pressing the PIP button sequentially will cycle betw een: 2. When PIP mode is enabled, a small window is displa yed in[...]

28 User Manual BDH5011 Switching Main and Sub-Pictures (SW AP) 1. Y ou can switch between the main pictur e and the sub picture using the SW AP button. Changing the Input Source f or Sub-Picture 1. Once PIP or POP mode is enabled, you can change the sub-picture’ s input source b y pressing the SOURCE button. 2. Pressing the SOURCE button r epeate[...]

Picture-In-Pictur e (PIP) / Side-by-Side Picture (POP) / Contd. Notes: • PIP mode can only be enabled if the displa y’ s input is set to: A V , S-Video, Component 1 or 2. If the displays main input is set to RGB or D VI, PIP , and POP will not function. • If the displa ys input is set to Component 1 or Component 2, PIP mode will only be a vai[...]

PIP Windo w SW AP 1. By default, the OSD will always displa y DISABLE. T o swap the main and sub windows, use the ADJ +/- button to select ENABLE. Once the swap is complete, the OSD will return to displa y DISABLE. Screen Rate (Aspect Ratio Contr ol) 1. When POP (Side-by-side) pictur e is enabled, you can change the aspect ratio f or the image disp[...]

10.2 Widescreen (16:9 Aspect Ratio) Viewing Modes Understanding Widescreen Modes This plasma displa y is capable of displa ying a widescreen image on the nativ e 16:9 aspect ratio screen. Howe ver , not all available br oadcast or video content fits perfectly in a widescr een (16:9) format, resulting in unused scr een space. Use the following guide[...]

F or Widescreen Content Many popular D VD titles are ‘Anamorphic’ (widescreen); howe ver , there are tw o predominant ‘Anamorphic’ (widescreen) aspect ratios: 2.35:1 and 1.85:1. When 2.35:1 content is displa yed on this 16:9 widescr een displa y , you will notice smaller black bars on top or bottom of the screen. When a 1.85:1 content is di[...]

Accessing Widescreen Viewing Modes using OSD Y ou can also use the OSD menu to access the same widescreen and zoom mode functions: 1. Press the MENU +/- buttons on the r emote control or the fr ont control panel. 2. Mak e sure that the PICTURE menu is displa yed. 3. Use the MENU +/- buttons to na vigate to SCREEN WIDTH and use the ADJ +/- buttons t[...]

10.4 Sleep Timer Settings Setting Sleep Timer Using OSD T o set the sleep timer using the OSD screen: 1. Press the MENU +/- buttons on the r emote control or the fr ont control panel. 2. Use the ADJ +/- buttons to na vigate to O THER OSD sub-menu as displa yed below . 3. Use the MENU +/- buttons to na vigate to SLEEP function. 4. Use the ADJ +/- bu[...]

10.5 V ariable and Fix ed Audio Output Setting Output Using OSD Y ou can set the type of output sent from the audio output jack, located on the rear side of the displa y . By using an OSD based switch, you can easily choose betw een variable or fixed audio outputs. T o set the audio output setting: 1. Press the MENU +/- buttons on the r emote contr[...]

BASS Adjusts the BASS level of the sound. For more bass response, increase the BASS level. TREBLE Adjusts the TREBLE level of the sound. For more vocal and high fr equency response, increase the TREBLE lev el. BALANCE Adjusts the BALANCE level betw een LEFT and RIGHT channels. A value of 50 is the center point between LEFT and RIGHT . T o shift the[...]

37 User Manual BDH5011 10.8 Signal Frequency Information Displa y Displa ying Fr equency of Signal This displa y is capable of displa ying the frequency lev el of the signal being displa yed. T o see signal frequency inf ormation: 1. Press the MENU +/- buttons on the r emote control or the fr ont control panel. 2. Use the ADJ +/- buttons to na viga[...]

When Using RGB & D VI Inputs Mode Hor . V er tical F ormat Refresh 1 31.469 59.940 640•480 (V GA) 60 2 37.861 72.809 640•480 (V GA) 72 3 37.500 75.000 640•480 (V GA) 75 4 43.269 85.008 640•480 (V GA) 85 5 35.156 56.250 800x600 (SV GA) 56 6 37.879 60.317 800x600 (SV GA) 60 7 48.077 72.188 800x600 (SV GA) 72 8 46.875 75.000 800x600 (SV GA[...]

11. PICTURE ADJUSTMENT 11.1 F or A V/Component Video (480i signal) Accessing Picture Adjustment Mode V arious picture adjustments can be set using the Picture Adjustment OSD menu. T o access the OSD menu: 1. Press the MENU +/- buttons on the r emote control or the fr ont control panel. 2. The first menu displa yed is the PICTURE menu. Make sur e th[...]

40 User Manual BDH5011 TINT Use tint to adjust fleshtone colors. Increasing the tint setting will add mor e cyan to the picture (more gr een appearance). Decreasing the setting will add mor e magenta to the picture (mor e red appearance). SHARPNESS Use sharpness to adjust the amount of detail enhancement to the video picture. Increasing the setting[...]

11.2 F or Component Video (480p , 720p and 1080i signal) Accessing Picture Adjustment Mode V arious picture adjustments can be set using the Picture Adjustment OSD menu. T o access the OSD menu: 1. Press the MENU +/- buttons on the r emote or the front contr ol panel. 2. The first menu displa yed is the PICTURE menu. Make sur e that the PICTURE OSD[...]

SHARPNESS Use sharpness to adjust the amount of detail enhancement to the video picture. Increasing the setting will enhance the edges of objects in the video picture. Decreasing the setting will r educe enhancement. COLOR TEMPERA TURE Select the color temperature f or white balance . There ar e five settings to choose fr om: (1) 6500D - sets the w[...]

43 User Manual BDH5011 11.2 For Component Video (480p, 720p and 1080i signal) - Contd. Accessing Geometric Adjustment Mode V arious geometric adjustments can be set using the Geometric Adjustment OSD menu. T o access the Geometric Adjust sub-menu: 1 Press the MENU +/- buttons on the remote control or the fr ont control panel. 2 The First menu displ[...]

11.3 For RGB / D VI Accessing Picture Adjustment Mode V arious picture adjustments can be set using the Picture Adjustment OSD menu. T o access the OSD menu: 1. Press the MENU +/- buttons on the r emote or the front contr ol panel. 2. The first menu displa yed is the PICTURE menu. Make sur e that the PICTURE OSD Menu is displa yed. 3. Use the MENU [...]

45 User Manual BDH5011 CLOCK PHASE Use clock phase to fine-tune the displa y to perfectly synchr onize the video’ s signal source. SCREEN WIDTH Use to change the screen width mode. There ar e two selections a vailable: 16:9 and 4:3. See Chapter 10..2 for mor e information. V -SIZE Adjusts the vertical size of the picture. Increase to enlarge the [...]

12. TROUBLESHOO TING T roubleshoot Common Conditions The following list r epresents possible anomalies that y ou ma y encounter and methods for r emedy . Please ref er to this checklist prior to contacting a ser vice repr esentative. 1. The power cor d is disconnected. 2. The main power switch on the back of the displa y is not switched on. 3. The [...]

13. SPECIFICA TIONS Displa y P anel Screen size: Diagonal 50 inch Aspect ratio: 16:9 wide Number of pix els: 1366(Horizontal, RGB T rio ) x 768(V er tical)pixels Pix el Pitch: 0.81mm x 0.81mm Luminance: 1000 cd/m 2 , at 1% white window pattern P ow er Source Input voltage: 100 ~ 240 V ac , 50 / 60 Hz Input curr ent: 4A Inrush curr ent: 60 A p-p/20m[...]

D VI Signal T ype: Digital Polarity: Positiv e or Negative Frequency H: support to 31K~68KHz V: suppor t to 50~85Hz Audio Signal : Analog 500mV rms /more than 22K ohm. Pin Assignments For D-SUB Connector (In/Loop Out) Pin Signal Assignment 1 RED 6 RED GND 11 GND 2 GREEN 7 GREEN GND 12 SD A 3 BLUE 8 BLUE GND 13 H-SYNC 4 GND 9 NC 14 V -SYNC 5 GND 10 [...]

RGB/D VI Refr . Hor .. V ert. V -Sync H-Sync Mode Rate Freq. Freq. P olariy P olarity Dot rate No Resolution (Hz) (K Hz) (Hz) (TTL) (TTL) (MHz) 1 640(V GA)x480 60 31.469 59.940 - - 25.175 2 640(V GA)x480 72 37.861 72.809 - - 31.500 3 640(V GA)x480 75 37.500 75.000 - - 31.500 4 640(V GA)x480 85 43.269 85.008 - - 36.000 5 800(SV GA)x600 56 35.156 56.[...]

Y/PB/PR F or Component 1 and 2 Mode Resolution Rate 1 640 x 480p 60 2 1920 x1080i 60 3 1280 x 720p 60 Maximum Resolution: Up to 1280 x 1024 (VGA Mode) Dimensions: Without/Stand With/Stand Width: 1256 mm 1256 mm Height: 762 mm 810 mm Depth: 107.5 mm 300 mm P ackage Dimensions Width: 1436 mm Height: 1125 mm Depth: 470 mm W eight Net weight: 108.00 lb[...]

Emission Requirement This unit meets the EMI limits in all screen modes as qualified b y FCC Class B part 15. P ow er Management Mode H-sync V -sync Video Po wer dissipation Normal Pulse Pulse Active Normal po wer Standby No pulse No pulse No video Pow er off Po wer sa ving Pulse No pulse blanked Less than 6 watts No pulse Pulse Note: This Plasma d[...]

Preset Timing Char t Item Description: A : T otal time B : Active displa y area including borders C : Active displa y area excluding borders D : Left/T op border E : Right/bottom border F : Blanking time G : Front por ch H : Sync-width I : Back porch. 52 User Manual BDH5011[...]

Mod e No. : 1 2 3 4 5 6 7 8 9 H Resolution: 640 640 640 640 800 800 800 800 800 V Resolution: 480 480 480 480 600 600 600 600 600 Refresh Rate: 60 72 75 85 56 60 72 75 85 Hz Pixel Clock: 25.175 31.500 31.500 36.000 36.000 40.000 50.000 49.500 56.250 MHz Horizontal visible: 640 640 640 640 800 800 800 800 800 Dots Horizontal total: 800 832 840 832 1[...]

Mode No 20 21 22 23 24 25 26 27 28 H Resolution: 1280 1920 640 852 640 832 1152 1366 1360 V Resolution: 720p 1080i 350 480 480 624 870 768 768 Refresh Rate: 60 60i 70 60 67 75 75 60 60 Hz Pixel Clock: 74.250 74.250 25.175 30.000 30.240 57.283 100.000 85.383 72.000 MHz Horizontal visible: 1280 1920 640 852 640 832 1152 1366 1360 Dots Horizont al tot[...]

14. W ALL MOUNT (OPTION) Rear View Notes: • Follow mount brack et instruction included in the mounting kit. • This type of equipment is to be installed by qualified installers, please contact an authorized dealer for installation. 6 97 mm 380 mm 55 User Manual BDH5011[...]

15. LIMITED W ARRANTY One Y ear Fr ee Labor One Y ear Fr ee P a r ts WHO IS CO VERED? Y ou must ha ve pr oof of the date purchased to receiv e warranty service . A sales receipt or other document showing the date that y ou purchased the pr oduct is considered proof of purchase. WHA T IS CO VERED? W arranty cov erage begins the da y you buy y our p [...]

57 User Manual BDH5011 • incidental or consequential damages resulting from the pr oduct. (Some states do not allow the exclusion of incidental or consequential damages, so the above exclusion ma y not apply to y ou. This includes, but is not limited to , prer ecorded material, whether cop yrighted or not cop yrighted.) • normal wear and tear ([...]

T O GET W ARRANTY SER VICE.... Please contact Philips at: 1-877-835-1838. Repair must be performed b y an authorized ser vice center or a factory ser vice center . If you do not live near a factory ser vice center , contact your dealer . If your dealer is an authorized ser vice center , he will arrange repair . If your dealer is not an authorized s[...]

59 User Manual BDH5011[...]