Pioneer FH-P80BT инструкция обслуживания

Operation Manual CD RDS RECEIVER FH-P80BT English[...]

En 2[...]

Thank you for buying this P ioneer product. Please read through these operating instruct ions so you will know how to operate your model properly . After you have finished read ing the instructions, k eep this man- ual in a safe place for future r eference. Before Y ou Start About this unit 6 – Operating environment 7 Visit our website 8 In case [...]

Bluetooth Audio 29 – Connecting a Bluetooth audio player 30 – Disconnecting a Bluetooth audio player 31 – Basic Operations 31 – Introduction to advanced operations 31 – Playing songs on a Bluetooth audio player 32 – Stopping playback 32 – Connecting to a Bluetooth audio player automatically 32 – Displaying BD (Bluetooth Device) addr[...]

Entering PIN code for Bluetooth wireless connection 56 Editing device name 56 Displaying system version for repair 56 Resetting the Bluetooth wireless technology module 57 Updating the sof tware about Bluetooth connection 57 Other Functions Using the AUX source 58 – About AUX1 and AUX2 58 – AUX1 source: 58 – AUX2 source: 58 – Selecting AUX [...]

If you want to dispose this product, do not mix it with general household waste. There is a se- parate collection system for used electronic products in accordance with legislation that re- quires proper treatment, recovery and recy- cling. Private households in the member states of the EU, in Switzerland and Norway may return their used electronic[...]

About AAC This unit plays back AAC files encoded by iT unes ® . iT unes is a trademark of Apple Inc., registered in the U.S. and other countries. Portable audio player compatibility ! Inquire at the manufacturer about your USB portable audio player/USB memor y. This unit corresponds to the following. — USB MSC (Mass Storage Class) compliant port[...]

Visit our website Visit us at the following site: http://www.pioneer .co.uk ! Register your product. W e will keep the de- tails of your purchase on file to help you refer to this information in the event of an insurance claim such as loss or theft. ! W e offer the latest information about Pioneer Corporation on our website. In case of trouble Shou[...]

! Do not handle the batter y with metallic tools. ! Do not store the batter y with metallic objects. ! If the battery leaks, wipe the remote control completely clean and install a new battery. ! When disposing of used batteries, comply with governmental regulations or environmen- tal public institutions ’ rules that apply in your country/area. Us[...]

What ’ s What Head unit              1 S.Rtrv button Press to switch Sound Retriever settings. 2 DISP/SCROLL button Press to select differ ent displays. Press and hold to scroll through the text in- formation. 3 Disc loading slot Insert a disc to play. 4 EJECT button Press to eject a CD from your built[...]

While using an iPod, press to shuffle all tracks. Press and hold to switch the control mode while using an iPod. If using the iPod with an interface adapter (CD-IB100 N ), press to switch the shuffle function. Remote control Operation is the same as when using the but- tons on the head unit.               ?[...]

Display indication               1 Main display section Displays band, frequency, elapsed playback time and other settings. 2 (artist) indicator Appears when the disc (track) artist name is displayed on the main display section. Appears when artist search refinement on the iP od browsing f[...]

h (phone book) indicator Appears when phone book list is displayed while telephone source is being selected. i NEWS indicator Appears when NEWS (news program inter- ruption) function is on. j T A indicator Appears when TA (traffic announcement standby) function is on. k TP indicator Appears when a TP station is tuned in. Basic Operation s Power ON/[...]

! External unit refers to a P ioneer product (such as ones available in the future) that, although incompatible as a source, enables control of basic functions with this unit. T wo external units can be controlled with this unit. When two external units are connected, the external unit is automatically allocated to external unit 1 or external unit [...]

Notes ! This unit ’ s AF (alternative frequencies search) function can be turned on and off . AF should be off for normal tuning operation (refer to the next page). ! RDS ser vice may not be provided by all sta- tions. ! RDS functions such as AF and T A are only ac- tive when your radio is tuned to an RDS sta- tion. Storing and recalling broadcas[...]

! If MW/L W band is selected, you can only se- lect BSM or LOCAL . Storing the strongest broadcast frequencies BSM (best stations memor y) lets you automa- tically store the six strongest broadcast fre- quencies. 1 Display the function menu. Refer to Introduction to advanced operations on the previous page. 2 Use MUL TI-CONTROL to select BSM in the[...]

Limiting stations to regional programming When AF is used, the regional function limits the selection of stations broadcasting regional programs. 1 Display the function menu. Refer to Introduction to advanced operations on page 15. 2 Use MUL TI-CONTROL to select REGIONAL in the function menu. 3 Press MUL TI-CONTROL to tur n the re- gional function [...]

Searching for an RDS station by PTY information Y ou can search for general types of broadcast- ing programs, such as those listed on this page. 1 Display the function menu. Refer to Introduction to advanced operations on page 15. 2 Use MUL TI-CONTROL to select PTY SEARCH in the function menu. 3 Push MUL TI-CONTROL left or right to select a program[...]

OTHERS EDUCA TE Educational programs DRAMA Radio plays and seri- als CUL TURE National or regional culture SCIENCE Nature, science and technology V ARIED Light entertainment CHILDREN Children ’ s SOCIAL Social affairs RELIGION Religious affairs or ser- vices PHONE IN Phone in TOURING T ravel programs; not for traffic announce- ments LEISURE Hobbi[...]

% Return to root folder Press and hold BAND . # If folder 01 (ROOT) contains no files, playback commences with folder 02. % Switch between compressed audio and CD-DA Press BAND . # This operation is available only when playing CD-EXTRA or MIXED-MODE CDs. # If you have switched between compressed audio and CD -DA, playback starts at the first track [...]

! When playing back VBR (variable bit rate)-re- corded WMA files, the average bit rate value is displayed. ! When playing back VBR (variable bit rate)-re- corded MP3 files, VBR is displayed instead of bit rate value. ! The sampling frequency shown in the display may be abbreviated. ! When Ever Scroll is set to ON at the initial set- ting, text info[...]

Notes ! Y ou can also select the function by pressing FUNCTION on the remote control. ! T o return to the ordinary display, press BAND . ! If you do not operate functions except for TITLE INPUT within about 30 seconds, the dis- play automatically returns to the ordinar y dis- play . ! When playing a compressed audio disc or CD TEXT disc, you cannot[...]

% Press S.Rtrv repeatedly to select the de- sired setting. OFF (off) — 1 — 2 # 2 is more effective than 1 . Note Y ou can also perform this operation in the menu that appears by using MUL TI-CONTROL . Using disc title functions Y ou can input CD titles and display the title. The next time you insert a CD for which you have entered a title, the [...]

Playing songs on USB portable audio player/USB memory F or details about the supported device, refer to P ortable audio player compatibility on page 7. Basic Operations     1 Folder number indicator 2 T rack number indicator 3 Play time indicator 4 Bit rate/sampling frequency indicator ! When playing back VBR (variable bit rate)-recorde[...]

Introduction to advanced operations 1 Press MUL TI-CONTROL to display the main menu. 2 Use MUL TI-CONTROL to select FUNCTION. T urn to change the menu option. P ress to se- lect. The function menu is displayed. 3 T urn MUL TI-CONTROL to select the function. PLA Y MODE (repeat play) — RANDOM MODE (random play) — SCAN MODE (scan play) — P AUSE [...]

Playing songs on iPod F or details about the supported iPod, refer to iP od ® compatibility on page 7. Basic Operations   1 Song number indicator 2 Play time indicator % Fast forward or reverse Push and hold MUL TI-CONTROL left or right. % Select a track (chapter) Push MUL TI-CONTROL left or right. Notes ! When using an iP od, iP od Dock Con[...]

2 Use MUL TI-CONTROL to select a cate- gory . T urn to change the categor y. Press to select. 3 Press LIST to switch to alphabet search mode. 4 T urn MUL TI-CONTROL to select a de- sired alphabet. 5 Press MUL TI-CONTROL to display the al- phabetical list. # If alphabet search is aborted, NOT FOUND is displayed. Displaying text information on iPod %[...]

Playing songs in a random order (shuffle) 1 Display the function menu. Refer to Introduction to advanced operations on the previous page. 2 Use MUL TI-CONTROL to select SHUFFLE MODE in the function menu. 3 Press MUL TI-CONTROL to select your fa- vorite setting. ! SHUFFLE SONGS – Play back songs in the selected list in random order . ! SHUFFLE ALB[...]

Changing audiobook speed While listening to an audiobook on iPod, play- back speed can be changed. 1 Display the function menu. Refer to Introduction to advanced operations on page 27. 2 Use MUL TI-CONTROL to select AUDIOBOOKS in the function menu. 3 Press MUL TI-CONTROL to select your fa- vorite setting. Press MUL TI-CONTROL repeatedly until the d[...]

Even though your audio player does not con- tain a Bluetooth module, you can still control it from this unit via Bluetooth wireless technol- ogy using a Bluetooth adapter (sold sepa- rately).  1 Device name Shows the device name of the connected Bluetooth audio player (or Bluetooth adapter). Connecting a Bluetooth audio player ! Before you can u[...]

4 Press MUL TI-CONTROL to establish con- nection. # While connecting, CONNECTING flashes. If the connection is established, CONNECTED is displayed. # If the connection fails, ERROR is displayed. In this case, tr y again from the beginning. Disconnecting a Bluetooth audio player This function can be operated only when the Bluetooth wireless connecti[...]

Playing songs on a Bluetooth audio player 1 Display the function menu. Refer to Introduction to advanced operations on the previous page. 2 Use MUL TI-CONTROL to select PLA Y in the function menu. 3 Press MUL TI-CONTROL to start play- back. Stopping playback 1 Display the function menu. Refer to Introduction to advanced operations on the previous p[...]

Bluetooth T elephone Important ! Since this unit is on standby to connect with your cellular phone via Bluetooth wireless technology , using this unit without running the engine can result in battery drainage. ! Advanced operations that require your atten- tion such as dialing numbers on the monitor , using phone book, etc., are prohibited while yo[...]

2 Use MUL TI-CONTROL to select CONNECTION. The connection menu is displayed. T urn to change the menu option. P ress to se- lect. 3 T urn MUL TI-CONTROL to select the function. P AIRED PHONE (paired phone) — BT HANDS FREE (new phone) — SET PHONE (phone registration) — DISCONNECT PHONE (disconnect phone) — DELETE PHONE (delete phone) If the [...]

When you select YES , this unit changes to PH BOOK DOWNLOAD and the download op- eration automatically begins. Af ter complet- ing, DA T A DOWNLOADED is displayed. According to the circumstances, this unit changes to PH BOOK TRANSFER . In this case, refer to step 4 on T ransferring entries to the phone book on page 43. # When you select NO , the di[...]

2 T urn MUL TI-CONTROL to select P AIRED PHONE. # P ush MUL TI-CONTROL up or down to select a desired phone. # P ush MUL TI-CONTROL left or right to display the BD address, group and ID number . 3 Press MUL TI-CONTROL to start connec- tion. PIN code is set to 0000 as the default. Y ou can change this code in the initial setting. Refer to Entering P[...]

3 Push MUL TI-CONTROL up or down to select a pairing assignment. P1 (user phone 1) — P2 (user phone 2) — P3 (user phone 3) # P ush MUL TI-CONTROL left or right to switch the BD address and device name. # If the assignment is empty, NO DA T A is dis- played and operation is not possible. 4 When the device name is being dis- played, push MUL TI-C[...]

Notes ! P ressing MUL TI-CONTROL while talking on the phone changes into ECHO CANCEL of FUNCTION . For details on ECHO CANCEL , refer to Echo canceling and noise reduction on page 44. ! The estimated call time appears in the display (this may differ slightly from the actual call time). Operating a call waiting % Answering a call waiting When a call[...]

# If you do not operate anything within about 30 seconds, the list display is canceled automati- cally . 4 Press MUL TI-CONTROL to make a call. # While in the phone number list, press and hold MUL TI-CONTROL to add or delete + to the phone number . 5 T o end the call, press . Using the phone book Before using the phone book, you need to set up the [...]

6 Press MUL TI-CONTROL to store the new number . After the number is stored, the display reverts to the detailed list. Assign genres to phone numbers If there are a lot of entries in the Phone Book it can be useful to assign them to specific gen- res (categories) for easier searching. There are four preset genres that you can assign entries to: HOM[...]

3 Press MUL TI-CONTROL to select a preset number that you want to assign a phon e number to. 4 Press and hold MUL TI-CONTROL to dis- play MEMOR Y. Push MUL TI-CONTROL up or down to switch MEMOR Y (memor y) and DELETE (delete). # If a phone number is already stored in the se- lected preset number , the new phone number will overwrite the old one. # [...]

Assigning preset numbers by using MUL TI-CONTROL 1 Push MUL TI-CONTROL up or down to switch preset numbers. 2 Perform from step 4 to 10 of Assigning preset numbers on page 40. Assigning preset numbers by using remote control 1 Press thumb pad to display RECENT CALLS (call history list). 2 Push thumb pad up or down to select a phone number . 3 Press[...]

Notes ! T o return to the playback display , press BAND . ! DEVICE INFO is the same as that of the Blue- tooth audio. (Refer to Displaying BD (Bluetooth Device) address on page 32.) ! PH. B. NAME VIEW (phone book name view) cannot be selected for cellular phone regis- tered guest phone. ! If cellular phone is connected to this unit via Bluetooth wi[...]

3 Press MUL TI-CONTROL to enter the phone book transfer standby mode. 4 Use the cellular phone to perform phone book transfer . Perform phone book transfer using the cellu- lar phone. For detailed instructions, refer to the instruction manual that came with your cellular phone. # Depending on the cellular phone, phone book can only be transferred o[...]

Making a call by entering phone number Important Be sure to park your vehicle and apply the park- ing brake when performing this operation. 1 Display the function menu. Refer to Introduction to advanced operations on page 42. 2 Use MUL TI-CONTROL to select NUMBER DIAL. # Y ou can also enter in this menu from the standby display by pressing DIRECT o[...]

3 Press MUL TI-CONTROL to change the name view order . Pressing MUL TI-CONTROL repeatedly changes the name view order between first and last name. Selecting menu language Menu language related to Bluetooth audio/tel- ephone can be changed. ! Some characters may not be displayed properly . 1 Display the function menu. Refer to Introduction to advanc[...]

Introduction of audio adjustments  1 Audio display Shows the audio adjustment status. 1 Press MUL TI-CONTROL to display the main menu. 2 Use MUL TI-CONTROL to select AUDIO. T urn to change the menu option. P ress to se- lect. The audio menu is displayed. 3 T urn MUL TI-CONTROL to select the audio function. T urn MUL TI-CONTROL to switch between [...]

Display Equalizer curve POWERFUL Powerful NA TURAL Natural VOCAL V ocal CUSTOM1 Custom 1 CUSTOM2 Custom 2 FLA T Flat S.BASS Super bass ! CUSTOM1 and CUSTOM2 are adjusted equalizer cur ves that you create. Adjust- ments can be made with a 7-band graphic equalizer . ! When FLA T is selected, no supplement or correction is made to the sound. This is u[...]

3 Push MUL TI-CONTROL left or right to select the equalizer band to adjust. Each time MUL TI-CONTROL is pushed lef t or right, equalizer bands are selected in the fol- lowing order: 50HZ — 125HZ — 315HZ — 800HZ — 2KHZ — 5KHZ — 12.5KHZ 4 Push MUL TI-CONTROL up or down to adjust the level of the equalizer band. Each time MUL TI-CONTROL is[...]

4 Push MUL TI-CONTROL up or down to adjust the output level of the subwoofer . Each time MUL TI-CONTROL is pushed up or down, subwoofer level increases or decreases. +6 to -24 is displayed as the level is increased or decreased. Boosting the bass Bass boost function boosts the bass level of sound. 1 Display the audio menu. Refer to Introduction of [...]

Using automatic sound levelizer During driving, noise in the car changes ac- cording to the driving speed and road condi- tions. The automatic sound levelizer ( ASL ) monitors such var ying noise and automati- cally increases the volume level, if this noise becomes greater . The sensitivity (variation of volume level to noise level) of ASL can be s[...]

Adjusting initial settings  Using the initial settings, you can customize various system settings to achieve optimal per- formance from this unit. 1 F unction display ! Shows the function status. 1 Press SOURCE and hold until the unit turns off. 2 Press MUL TI-CONTROL and hold until the initial setting menu appears in the dis- play . 3 T urn MUL[...]

Note Y ou can match the clock to a time signal by pressing MUL TI-CONTROL . ! If 00 to 29 , the minutes are rounded down. (e.g., 10:18 becomes 10:00 .) ! If 30 to 59 , the minutes are rounded up. (e.g., 10:36 becomes 11:00 .) T urning the off clock display on or off If the off clock display is turned on and the sources and the feature demo are off [...]

Switching the dimmer setting T o prevent the display from being too bright at night, the display is automatically dimmed when the car ’ s headlights are turned on. Y ou can turn the dimmer on or off . 1 Display the initial setting menu. Refer to Adjusting initial settings on page 52. 2 Use MUL TI-CONTROL to select DIMMER. 3 Press MUL TI-CONTROL t[...]

Switching the feature demo The feature demo automatically starts when power to this unit is turned off while the igni- tion switch is set to ACC or ON. 1 Display the initial setting menu. Refer to Adjusting initial settings on page 52. 2 Use MUL TI-CONTROL to select DEMONSTRA TION. 3 Press MUL TI-CONTROL to tur n the fea- ture demo on. # T o turn t[...]

Entering PIN code for Bluetooth wireless connection T o connect your cellular phone to this unit via Bluetooth wireless technology, you need to enter PIN code on your phone to verify the connection. The default code is 0000 , but you can change this in this function. ! With some Bluetooth audio players, you may be required to enter the Bluetooth au[...]

3 Push MUL TI-CONTROL left to switch to the version of the Bluetooth module of this unit. # P ushing MUL TI-CONTROL right returns to the system version of this unit. Resetting the Bluetooth wireless technology module Bluetooth telephone and Bluetooth Audio data can be deleted. T o protect personal infor- mation, we recommend deleting this data be- [...]

Using the AUX source Up to two auxiliar y devices such as VCR or portable devices (sold separately) can be con- nected to this unit. When connected, auxiliar y devices are automatically read as AUX sources and assigned to AUX1 or AUX2 . The relation- ship between AUX1 and AUX2 sources is ex- plained below . About AUX1 and AUX2 There are two methods[...]

Basic operation F unctions allocated to the following opera- tions are different depending on the con- nected external unit. For details concerning functions, refer to the connected external unit ’ s owner ’ s manual. % Press BAND. % Press and hold BAND. % Push MUL TI-CONTROL left or right. % Push and hold MUL TI-CONTROL left or right. % Push M[...]

Playing songs on iPod Basic operation Y ou can use this unit to control an inter face adapter for iP od, which is sold separately .   1 Song number indicator 2 Play time indicator % Fast forward or reverse Push and hold MUL TI-CONTROL left or right. % Select a track Push MUL TI-CONTROL left or right. Notes ! Read the precautions for iP od on [...]

! T o return to the ordinary display, press BAND . ! If you do not operate functions within about 30 seconds, the display automatically returns to the ordinary display . Playing songs in a random order (shuffle) % Press re peatedly to select the de- sired setting. ! SHUFFLE SONGS – Play back songs in the selected list in random order . ! SHUFFLE [...]

Using CD TEXT functions Y ou can use these functions only with a CD TEXT compatible multi-CD player . The operation is the same as that of the built- in CD player . Refer to Displaying text information on disc on page 20. Introduction to advanced operations Y ou can only use COMPRESSI ON (compr es- sion and DBE) with a multi-CD player that sup- por[...]

2 Use MUL TI-CONTROL to select COMPRESSION in the function menu. # If the multi-CD player does not support COMP/DBE, NO COMP is displayed when you at- tempt to select it. 3 Press MUL TI-CONTROL to select your fa- vorite setting. COMP OFF — COMP 1 — COMP 2 — COMP OFF — DBE 1 — DBE 2 Using ITS playlists ITS (instant track selection) lets yo[...]

3 Use MUL TI-CONTROL to select ITS MEMO in the function menu. 4 Select the desired track by pushing MUL TI-CONTROL left or right. 5 Push MUL TI-CONTROL down to erase the track from your ITS playlist. The currently playing selection is erased from your ITS playlist and playback of the next track begins. # If there are no tracks from your playlist in[...]

# If you do not operate the list within about 30 seconds, the display automatically returns to the ordinary display . DVD Player Basic Operations Y ou can use this unit to control a DVD player or multi-DVD player , which is sold separately . F or details concerning operation, refer to the DVD player ’ s or multi-DVD player ’ s operation manual.[...]

Press any of 1 to 6 on the remote control to select the desired disc. Push MUL TI-CONTROL up or down. Selecting a folder ! Y ou can operate this function only when a DVD player compatible with compressed audio playback is connected to this unit. % Push MUL TI-CONTROL up or down to select a folder . Introduction to advanced operations 1 Press MUL TI[...]

! When playing back Video CD or CD, if you per- form track search or fast for ward/reverse dur- ing TRACK REPEA T , the repeat play range changes to DISC REPEA T . ! When playing back compressed audio, if you select another folder during repeat play , the repeat play range changes to DISC REPEA T . ! When playing back compressed audio, if you perfo[...]

1 Press LIST. Preset screen is displayed. 2 Use MUL TI-CONTROL to store the se- lected station in memory . T urn to change the preset number . Press and hold to store. # Y ou can also store the station in memor y by pushing and holding MUL TI-CONTROL right. 3 Use MUL TI-CONTROL to select the de- sired station. T urn to change the station. Press to [...]

T roubleshooting Bluetooth audio/telephone Symptom Cause Action The audio of the Bluetooth audio source is not played back. A Bluetooth-con- nected cellular phone is cur- rently in a phone call. The audio will be played back when the call is com- pleted. A Bluetooth-con- nected cellular phone is cur- rently in opera- tion. Do not ope rate the cellu[...]

CHECK USB The USB connec- tor or USB cable is short-circuited. Confirm that the USB connector or USB cable is not caught in some- thing or damaged. The connected USB portable audio player/ USB memory consumes more than 500 mA (maximum allow- able current). Disconnect the USB portable audio player/USB memory and do not use it. T urn the ignition swi[...]

Handling guideline of discs and player ! Use only discs featuring either of following two logos. ! Use only conventional, fully circular discs. Do not use shaped discs. ! Use 12-cm or 8-cm CD. Do not use an adapter when playing 8-cm CDs. ! Do not insert anything other than a CD into the CD loading slot. ! Do not use cracked, chipped, warped, or oth[...]

! MP3i (MP3 interactive), mp3 PRO: No AAC ! Compatible format: AAC encoded by iT unes ® ! Sampling frequency : 11.025 kHz to 48 kHz ! T ransmission rate: 16 kbps to 320 kbps ! Apple Lossless: No WA V ! Compatible format: Linear PCM (LPCM), MS ADPCM ! Quantization bits: 8 and 16 (LPCM), 4 (MS ADPCM) ! Sampling frequency : 16 kHz to 48 kHz (LPCM), 2[...]

USB audio player/USB memory USB audio player/USB memory compatibility ! USB version: 2.0, 1.1 and 1.0 ! USB data transfer rate: full speed ! USB Class: MSC (Mass Storage Class) de- vice ! Protocol: bulk ! Minimum amount of memor y: 250 MB ! Maximum amount of memor y: 250 GB ! File system: FA T32 and FA T16 ! Supply current: 500 mA Notes ! P artitio[...]

Example of a hierarchy : F older : Compressed audio file 1 2 3 4 5 6 L e v e l 1 L e v e l 2 L e v e l 3 L e v e l 4 ! 01 to 05 represent assigned folder num- bers. 1 to 6 represent the playback se- quence. The user cannot assign folder numbers and specif y the playback se- quence with this unit. ! Playback sequence of the audio file is the same as[...]

DC DC DC DC А Б В Г Д Е , Ё Ж З И , Й К Л М Н О П Р С Т У Ф Х Ц Ч Ш , Щ Ъ Ы Ь Э Ю Я Additional Information En 75 Appendix Additional Information[...]

Specifications General Po w e r s o u r c e ............................. 14.4 V DC (12.0 V to 14.4 V allowable) Grounding system ................... N e g a tive type Max. current consumption ..................................................... 10.0 A Dimensions (W × H × D): DIN Chassis ..................... 1 7 8 m m × 1 0 0 m m × 1 5 2 mm N[...]

PIONEER CORPORA TION 4-1, MEGURO 1-CHOME, MEGURO-KU T OKY O 153-8654, JAP AN PIONEER ELECTRONICS (USA) INC. P .O . Box 1540, Long Beach, California 90801-1540, U.S.A. TEL: (800) 421-1404 PIONEER EUROPE NV Haven 1087, K eetberglaan 1, B-9120 Melsele, Belgium TEL: (0) 3/570.05.11 PIONEER ELECTRONICS ASIACENTRE PTE. L TD. 253 Alexandra Road, #04-01, S[...]