Planar PQ150 инструкция обслуживания

PLANAR LCD MONITOR P Q 1 5 0 M A N U A L www.planar.com[...]

A1 This unit has been engineered and manufactur ed to ensur e your personal safet y , however imp r oper use may r esult in electrical shock or fi r e hazards. In order to allow the proper operation of all safeguards incorporated in this displa y , observe the following basic rules for its installation, use, and servicing. On Safety Use only the po[...]

A2 Important Precautions On Installation Do not allow anything to rest upon or roll over the power cord, and do not place the display where the power cord is subject to damage. Do not use this display near water such as near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool. Displays are provided with ventil[...]

A3 Connecting the Display Before setting up the monitor , ensure that the power to the monitor , the computer system, and other attached devices is turned off. Unfolding the stand base 1. Lay the monitor on a cushion or piece of soft cloth with its front side facing upward. 2. Grasp the stand firmly with both hands as shown in the picture and unfol[...]

A4 Connecting the Display Using the Computer 1. Connect the signal cable. When attached, tighten the thumbscrews to secure the connection. 2. Connect the power cord into a proper power outlet that is easily accessible and close to the display. Mac adapter For Apple Macintosh use, a separate plug adapter is needed to change the 15 pin high density ([...]

A5 Control Panel Functions Front Panel Controls Buttons Use these buttons to choose or adjust items in the On Screen Display. MENU Button Use this button to enter or exit the On Screen Display. Use this button to turn the display on or off. This Indicator lights up green when the display operates normally. If the display is in DPM (Energy Saving) m[...]

A6 Control Panel Functions Control Direct Access Function When adjusting your display settings, always press the SELECT/AUTO button before entering the On Screen Display(OSD). This will automatically adjust your display image to the ideal settings for the current screen resolution size (display mode). The best display mode is 1024x768 . AUTO adjust[...]

A7 On Screen Display (OSD) Control Adjustment Screen Adjustment Making adjustments to the image size, position and operating parameters of the display is quick and easy with the On Scr een Display Control system. A short example is given below to familiarize you with the use of the contr ols. The following section is an outline of the available adj[...]

A8 NOTE The order of icons may differ depending on the model (A8~A10). On Screen Display(OSD) Selection and Adjustment To adjust the brightness and contrast of the screen BRIGHTNESS CONTRAST COLOR POSITION TRACKING SETUP Main menu Sub menu Reference The following table indicates all the On Scr een Display control, adjustment, and setting menus. PRE[...]

A9 On Screen Display(OSD) Selection and Adjustment Y ou wer e intr oduced to the pr ocedure of selecting and adjusting an item using the OSD system. Listed below are the icons, icon names, and icon descriptions of the all items shown on the Menu. OSD Adjust Description BRIGHTNESS To adjust the brightness of the screen. CONTRAST To adjust the contra[...]

A10 On Screen Display(OSD) Selection and Adjustment T o improve the clarity and stability of the screen OSD Adjust Description To minimize any vertical bars or stripes visible on the screen background.The horizontal screen size will also change. To adjust the focus of the display. This item allows you to remove any horizontal noise and clear or sha[...]

A11 T roubleshooting No image appears Check the following before calling for service. No image appears Is the power cord of the display connected? Is the power indicator light on? Is the power on and the power indicator green? Is the power indicator amber? Do you see an "INPUT SIGNAL OUT OF RANGE" message on the screen? Do you see a "[...]

A12 T roubleshooting Display image is incorrect Display Position is incorrect. On the screen background, vertical bars or stripes are visible. Any horizontal noise appearing in any image or characters are not clearly portrayed. The screen color is mono or abnormal. The screen blinks. Press the SELECT/AUTO button to automatically adjust your display[...]

A 13 Specifications NOTE Information in this document is subject to change without notice. Flat Panel Active matrix-TFT LCD 15 inches diag viewable, Anti-Glare coating, 0.3 mm pixel pitch Horizontal Viewing Angle: -60 to +60 deg typical Vertical Viewing Angle: -45 to +45 deg typical Horizontal Freq. 30 - 63kHz (Automatic) Vertical Freq. 56 - 75Hz ([...]

A14 Specifications Preset Modes (Resolution) Display Modes (Resolution) Horizontal Freq. (kHz) Vertical Freq. (Hz) 1 2 3 4 5 6 7 8 9 10 11 * 12 13 14 * Recommended Unlike CRT monitors, which require a high refresh rate to minimize flickering, TFT technology is inherently flicker-free. If possible, configure your computer for 1024 x 768 addressabili[...]

       P LA N A R SYST EM S , IN C .      Customer Service support: http://planar.custhelp.com email: desktopmonitors@planar.com phone: 1-866-PLANAR-1 (1-866-752-6271) hours: M-F, 8am - 9pm EST © 2003 Planar Systems, Inc. Planar is a registered trademark of Planar Systems, Inc. Other brands and names[...]