Planar PXL2240MW инструкция обслуживания

www .planar .c om USER'S GUIDE T ouch LED LCD Monitor PXL2240MW[...]

Content Operation Instr uctions ......................................................................................................... .......................................... 1 Unpacking In structions ......................................................................................................... .....................................[...]

1 Operation Instructions Thank you for purchasing the PXL2240MW multi-touch LED monitor. Please read this guide thoroughly before installation. FCC RADIO FREQUENCY INTERFERENCE STATEMENT WARNING: (FOR FCC CERTIFIED MODELS) This LED Mo nitor has been tested and found compliant with the limits for a Class B digital device, pursuant to part 15 of the [...]

2 Unpacking Instructions  Move the Touch LED LCD Monitor out of the package and take off the plastic bag and Polystyrene Foam.  Pull the base from Parallel versus Panel to Vertical.  Adjust the Panel between 4° leaning forward and 40° leaning backward. Safety Precautions Follow all warnings, precautions and maintenance as recommended in [...]

3 Package Overview Touchscreen LED Monitor Po we r Co r d VGA Signal Cable Audio-in Cable USB Cable (A to B) HDMI Cable User ’ s Guide[...]

4 Front View of the Product ① ② ③ ④⑤⑥ ① OSD Turn On/ Off ② Volume Adjust/ Scroll Down/ Adjust Decrease ③ Preset Mode/ Scroll UP/ Adjust Increase ④ Input select/ Confirm Selection ⑤ LED Indicator ⑥ Power On/ Off * Hot keys Instruc tions please see “Using the OSD Menu ” on page 7.[...]

5 Rear View of the Product ① ② ③ ④ ⑤ ⑥ ⑦ ① Power Input ② USB - T ype A to B ③ Headphone Jack ④ Audio Input ⑤ HDMI input (HDMI 19 pin) ⑥ DVI Input (DVI 24 pin) ⑦ VGA Input (D-Sub 15 pin)[...]

6 Quick Installation 1. Connect either VGA, DVI or HDMI Video Source from the monitor to the computer. Make sure both monitor and computer are powered OFF. 2. Connect the audio cable from audio output of computer to the audio input of the monitor. 3. Connect the USB cable from the computer to the monitor. 4. Connect power cord to a properly grounde[...]

7 Basic Operation and Calibration/Reset Instructions Before using the Touch LED LCD Monitor:  Connect external equipment properly.  Insert the power plug, and the power LED indicator will light orange. Power On/Off To turn the Touch LED LCD Monitor on/off: Press POWER button on the front. The power LED indicator light will be blue when the To[...]

8 Option 2: OSD & Power button lock – all 5 buttons including the “POWER” button are locked. Press and hold the 1 button and the ▼ button for 3 seconds to lock all 5 buttons. The Touchscreen LED Monitor will show a “Power Button Locked” message for 3 seconds and the message will disappear automatically. Repeat this step to unlock. P[...]

9 Advanced Operation—OSD Menu You can use the OSD menu to adjust various settings for your Touchscreen LED Monitor. Press the 1 button to display the OSD Menu, and use ▲▼ to select the desired OSD menu. Short Cuts Function from the button(s) Auto Image Adjust: To auto adjust Horizontal Position , Vertical Position, Phase (Fine Tune) and Clock[...]

10 Input Select: When Input Select is pressed, change Input signal to VGA, DVI, HDMI or Auto. Audio Adjust: To adjust the audio functions. Volume: To adjust the volume of speaker output. Mute: To turn the Mute ON/OFF. Audio Input: When in HDMI input, select where the audio source comes fr om Line -In or HDMI. Color Adjust: To select the color for i[...]

11 Sharpness: To adjust the clarity of a non-Full HD Resolution (1920x1080) signal with ▼ or ▲ button. Video Mode Adjust: To select the video mode from Full Screen or Aspect R atio . Full Screen: To select full-screen size image. Aspec t Ratio: T o selec t input timing image size. Setup Menu: To set up Language Select, OSD Position, OSD Time Ou[...]

12 Supporting Timing Modes STANDARD RESOLUTION VGA 720 x 400 @ 70Hz VGA 640 x 480 @ 60Hz MAC 640 x 480 @ 67Hz VESA 640 x 480 @ 72Hz VESA 640 x 480 @ 75Hz VESA 800 x 600 @ 56Hz VESA 800 x 600 @ 60Hz VESA 800 x 600 @ 72Hz VESA 800 x 600 @ 75Hz MAC 832 x 624 @ 75Hz VESA 1024 x 768 @ 60Hz VESA 1024 x 768 @ 70Hz VESA 1024 x 768 @ 75Hz VESA 1280 x 960 @ [...]

13 Technical Information Panel 21.5” TFT (w ith L ED ba ck li gh t) Power Management On: 24 Watts (typical), 35 Watts (maximum) Standby Mode: < 0.5 Watt Off: < 0.5 Watt Displayable Resolution Full HD 1920 x 1080 max. Vertical Frequency 60Hz max. Pixel Dimension 0.24825 x 0.24825 mm Display Color 16.7M Tilt 4° (+3/-3) ~ 40° (+3/-3) Active [...]

100mm x 100mm Screw Mounting Options 14 Wall-Mount Installation Instructions Wall Mount Arm not included T urn the power OFF then disconnect the cables from the TFT T ouchscreen L CD M onitor befor e per forming the pr ocedure below . 1. Lay the TFT T ouchscreen L CD Mo nitor face down on a soft sur face. 2. Remove the 2 screws holding the stand to[...]

15 Troubleshooting No power  Make sure A/C power cord is securely connected to the power adapter and the power supply is firmly connected to the Touchscreen LED Monitor .  Plug another electrical device into the power outlet to verify that the outlet is supplying proper voltage.  Make sure all signal cables are installed. Power on but no s[...]

16 Planar Support Cables and Accessories To find cables and accessories for your Planar monitor, touch screen or other Planar products visit our online store at www.PlanarOnline.com . Technical Support Visit Planar at http://www.planar.com/support for operations manuals, touchscreen drivers, warranty information and access to Planar's Tec hnic[...]

020-1221-00A 2001132404T 2013[...]