Planet FGSW-1828PS инструкция обслуживания

User's Manual FNSW-1608PS FGSW-1828PS 16-Port 10/100Mbps Web Smart PoE Switch - 1 -[...]

- 2 - Trademarks Copyright © PLANET Technology Corp. 2008. Contents subject to revisi on w ithout prior notice. PLANET is a registered trademark of PLANET Technology Corp. All other trademarks belong to their respective owners. Disclaimer PLANET Technology does not warrant that the hardware w ill w o rk properly in all env ironments and applicatio[...]

- 3 - TABLE OF CONTENTS 1. INTRODUCTION ............................................................................................................ 5 1.1 C HECKLIST ................................................................................................................................................ 5 1.2 A BOUT THE S WITCH ..............[...]

- 4 - 5.5 A UTO -N EGOTIATION ............................................................................................................................... .. 63 6. POWER OVER ETHERNET OVERVIEW ..................................................................... 64 7. THE POE PROVISION PROCESS ....................................................[...]

- 5 - 1. INTRODUCTION 1.1 Checklist Check the contents of your p ackage for follow ing parts: z FNSW-1608PS or FGSW-1828PS x1 z Quick Installation Guide x1 z User's manual CD x1 z Power cord x 1 z Rubber feet x 4 z Two rack-mounting brackets w ith attachment screws x1 If any of these pieces are missing or dam aged, please contact your dealer i[...]

- 6 - 1.3 Features ◆ Complies with the IEEE 802.3, IEEE 802.3u, I EEE 802.3ab, IEEE 802.3z Gi gabit Ethernet standard ◆ 16-Port 10/100Mbps with 8-Port PoE Web Smart PoE Sw itch (FNSW-1608PS) ◆ 16-Port 10/100Mbps + 2 Gigabit TP / SFP Combo Web Smart PoE Switch (FGSW-1828PS) ◆ 8-Port support 48VDC power to PoE Pow ered Device (Port 1 to port [...]

- 7 - Dimensions 440 x 120 x 44 mm (1U height) Weight 1.75 kg 2.02 kg Pow er Requirement 100-240V AC, 50-60 Hz, 1A System opera tion Power Con- sumption / Dissipation (Full load) 13.5 watts / 46BTU 21 watts / 71BTU Temperature Operating: 0~50 degree C Storage: -40~70 degree Humidity Operating: 5% to 90%, Storage: 5% to 90% (Non-condensing) Pow er o[...]

- 8 - 2. HARDWARE DESCRIPTION This product provides three differ ent running speeds – 10Mbps, 100Mbps and 1000M bps in the same Web Smart PoE Switch and automatically distinguis hes the speed of incoming connection. This section describes the hardware f eatures of Web Smart PoE Switch. For easier management and c ontrol of the Web Smart PoE Switc[...]

- 9 - 2.2 Rear Panel The rear panel of the Web Smart PoE Switch indicates an AC inlet pow er socket, w hich accepts input power from 100 to 240VAC, 50-60Hz, 1A. 100~240V AC 50 / 60Hz Figure 2-3: FNSW-1608PS / FG SW-1828PS Switch rear panel Pow er Notice: 1. The device is a power-requir ed device, it means, it w ill not work till it is pow ered. If [...]

- 10 - 2.3.2 Rack Mounting To install the Web Smart PoE Switch in a 19-inch standard rack, follow the instructions described below. Step 1: Place your Web Smart PoE Sw itch on a hard flat surf ace, with the front panel posit ioned tow ards your front side. Step 2: Attach a rack-mount bracket to each side of the Web Smart PoE Switch with supplied sc[...]

- 11 - 3. SWITCH MANAGEMENT This chapter describes how to manage the Web Smart PoE Sw itch. T opics include: - Overview - Management method - Logging on to the Web Smart PoE Switch 3.1 Overview The Web Smart PoE Switch provides a user-friendly, Web interf ace. Using this interface, y ou can perform various switch configuration and management activi[...]

- 12 - 3.2.2 PLANET Smart Discovery Utility You can manage the Web Smart PoE Switch remotely by havi ng a remote host w ith Web browser, such as Microsoft Internet Explorer or Netscape Navigator. Using this management method: The Web Smart PoE Switch must have an Internet Protocol (IP) address accessible for the remote host. For easily list the FNS[...]

- 13 - 4. This utility show all necessary information from the devic es, such as MAC Address, De vice Name, firmware version, Device IP Subnet address, also can assign new passw ord, IP Subnet address and description for the devices. 5. After setup completed, press “Update Dev ice” , “Update Multi” or “Update A ll” button to take affect[...]

- 14 - 4. WEB MANAGEMENT To modify y our PC’s IP domain to the same with W eb Smart PoE Switch then use the default IP address ( 192.168.0.100 ) to remote configure Web Smart PoE Switch through the We b interface. # Notice: The following section will base on the console screens of FGSW-1828PS, for FNSW-1608PS the display w ill be the same to FGSW[...]

- 15 - The Switch Menu provide eight majo r management functions, the screen in Figure 4-2 appears. Figure 4-2 Web Main Menu Screen These items and its description shown as below : ◆ System: Provide System configurati on of Web Smart PoE Sw itch. Explain ed in section 4.2. ◆ Port Management: Provide Port Management configuration of Web Smart Po[...]

- 16 - 4-2 System This section provides System Information, IP Configurat ion, Passw ord Setting, Alert Trap, Factory Default, Firmware Update and Reboot functions of Web Smart PoE Switch, the screen in Figure 4-3 appears and table 4-1 describes the System object of Web Smart PoE Sw itch. Figure 4-3 System Web Page Screen Table 4-1 Descriptions of [...]

- 17 - 4.2.1 System Information This section displays the MAC address, Hardware Version, Software Version and System Up Time, also allow define the device description and press “Apply ” button to take affect. T he screen in Figure 4-4 appears. Figure 4-4 System Information Web Page Screen # Notice: Up to 16 characters is allowed for the Device [...]

- 18 - 4.2.2 IP Configuration This section provides change the IP Addr ess, Subnet Mask and Gateway , the screen in Figure 4-5 appears. Figure 4-5 IP Configuration Web Page Screen After setup complete and press “Apply ” button to take affect. T he following screen in Figure 4-6 appears and then another Web page login screen w ith new IP address[...]

- 19 - 4.2.3 Password Setting This section provides change the Username and Password, the screen in Figure 4-7 appears. Figure 4-7 Passw ord Setting Web Page Screen # Notice: Up to 8 characters is allowed for the username and p assword assign.[...]

- 20 - 4.2.4 Alert Trap This section provides Web Smart PoE Switch Alert Trap c onfiguration, such as Disable or enable the trap mode and alert IP address assign the screen in Figure 4-8 appears. The table 4-2 describes the Alert Tr ap object of Web Smart PoE Switch. Figure 4-8 Alert T rap Web Page Screen Table 4-2 Descriptions of the Alert Trap We[...]

- 21 - 4.2.5 Factory Default This section provides reset the Web Smart Po E Switch to factory default mode, the screen in Figure 4-9 appears. Figure 4-9 Factory Default W eb Page Screen Press “Factory Default” button to take affect. The follow ing screen in Figure 4-10 appears and then another Web page login screen with default setting w ill sh[...]

- 22 - 4.2.6 Firmware Update This section provides firmware upgrade of the Web Smart PoE Sw itch, the screen in F igure 4-11 appears. Figure 4-1 1 Firmw are Update Web Page Screen ress “Update” button for start the firmw ar e upgrade process, the screen in Figure 4-12 & 4-13 appears. P Figure 4-12 Firmware Update Web Page Screen[...]

- 23 - Figure 4-13 Firmware Update Web page Screen Then the following screen appears, on administrator PC, the screen in Figure 4-14 appears. press “Brow ser” button to find the firmware locati Figure 4-14 Firmware Update Web Page Screen[...]

- 24 - After find the firmw are location from administrator PC, press “Up date” button to start the firmware upgrade process. The W se wait for a w hile for system reboot. screen in Figure 4-15 appears. Figure 4-15 Firmware Update W eb Page Screen hen firmware upgrade process is completed then the follow i ng screen appears, plea After device r[...]

- 25 - # Notice: Recommend to use IE 6.0 browser for firmw are upgrade process. 4.2.7 Reboot s reboot the W eb Smart PoE Switch, the screen in Figure 4-17 appears. This section allow Figure 4-17 Reboot Web Page Screen ress “Reboot” button to reboot the Web Sm art PoE Switch, the screen in Figure 4-18 appears. After device reboot P completed, th[...]

- 26 - Figure 4-18 Reboot Web Page Screen 4-3 Port Management This section provides Port C onfiguration, Port Mirroring, Bandwidth Control, Broadcast St orm Control and Port Statistics from Web Smart PoE Switch, the screen in Figure 4-19 appears and table 4-3 describes the Port Management object of Web Smart PoE Switch. Figure 4-19 Port Management [...]

- 27 - 4.3 iguration Thi etail s table 4-4 & 4-5 n objects of Web Smart PoE Switch. .1 Port Conf s section introduces d ettings of per port on Web Smart PoE Sw itch; the screen in Figure 4-20 & 4-21 appears and e Port Configurati o descriptions th Figure 4-20 Port Configuration Web Page Screen[...]

- 28 - Figure 4-21 Port Configuration Web Page Screen Table 4-4 Descriptions of the Port Conf iguration Web Page Screen Objects cts Table 4-5 Descriptions of the Port Conf iguration Web Page Screen Obje Object Description Port Allow choosing all or one port of Web Smar t PoE Switch for further management, the available options is Al l & 01 to 1[...]

- 29 - 4.3.2 Port Mirroring Thi on introduces detail s Figure 4-22 app 4-6 descript s secti ettings of Port Mirro ring function of Web Smart PoE Sw itch; the screen in ears and table ions the Port Mirroring objects of Web Smart PoE Switch. Table 4-6 Descriptions of the Port Mirroring Screen Objects Figure 4-22 Port Mirroring Web Page Screen Object [...]

- 30 - 4.3.3 Bandwidth Control This section introduces detail settings of Bandwidth C ontrol function of Web Smar t PoE Sw itch; the screen in F igure 4-23 appears and table 4-7 description the Bandwidth Control objects of Web Smart PoE Sw itch. Figure 4-23 Bandwidth Control Web Page Screen Table 4-7 Descriptions of the Bandw idth Control Screen Ob[...]

- 31 - 4.3.4 Broadcast Storm Control This section introduces detail settings of Broadcast Storm Control function of Web Smart PoE Switch; the screen in Figure 4-24 appears and table 4-8 descriptions the Broadcast Storm Contro l objects of Web Smart PoE Sw itch. Figure 4-24 Broadcast Storm Control Web Page Screen Table 4-8 Descriptions of the Broadc[...]

- 32 - 4.3.5 Port Statistics This section introduces detail informa tion of Port Statistics function of Web Smart PoE Switch; the screen in Figure 4-25 appears and table 4-9 descriptions the Port Statistics objects of Web Smart PoE Switch. Table 4-9 Descriptions of the Port Statistics Screen Objects Figure 4-25 Port Statistics Web Page Screen Objec[...]

- 33 - 4-4 VLAN Setting A Virtual LAN (VLAN) is a logical network grouping that limits t he broadcast domain. It allow s y ou to isolate netw ork traffic so only members of the VLAN receive tra ffic from the same VLAN members. Basica lly, creating a VLAN from a sw itch is logically equivalent of reconnecting a group of netwo rk devices to another L[...]

- 34 - 802.1Q Tag User Priority CFI VLAN ID (VID) 3 bits 1 bits 12 bits TPID (Tag Protocol Identifier) TCI (Tag Control Information) 2 bytes 2 bytes Preamble Destination Address Source Ad- dress VLAN TA G Ethernet Type Data FCS 6 bytes 6 bytes 4 bytes 2 bytes 46-1517 bytes 4 bytes The Ether Type and VLAN ID are inserted after the MAC sour ce addres[...]

- 35 - This section provides VLAN Configurati on from Web Smart PoE Switch, the screen in Figure 4-26 appears and table 4-10 describes the VLAN Setting object of Web Smart PoE Switch. Figure 4-26 VLAN Setting Web Page Screen Table 4-10 Descriptions of the VLAN Setting Screen Objects Object Description VLA N Mode Provide different VLAN operation mod[...]

- 36 - 4 This section introduces detail information of IEEE 802. 1Q VLAN function of Web Smart PoE Switch; Choose “802.1Q VLA N” from VLAN from the VLAN Mode and press “A pply” button to enable the 802.1Q VL AN function. The screen in Figure 4-27 & 4-28 appears and table 4-11 description the 802.1Q VLAN objects of Web Smart PoE Switch. [...]

- 37 - Table 4-11 Descriptions of the 802.1Q VLAN Setting Screen Objects Figure 4-29 802.1Q VLAN per Port Setting Web Page Screen This section introduces detail informa tion of IEEE 802.1Q VLAN Per Port Se tting of Web Smart PoE Switch; The table 4-12 description the 802.1Q VLAN Per Port Se tting objects of Web Smart PoE Switch. Table 4-12 Descript[...]

- 38 - 802.1Q VLAN Setting example: T wo separate 8 w th 2. Each VLAN is traf fic, only the same VLAN member port can receive traffic from each other . 02.1Q VLAN scenario 1. Shows ho e Web Smart PoE Switch. Handles Un t agged and T agged traffic from tw o 802.1Q VLAN groups. olate network Figure 4-30 two separate 802.1Q VLAN diagram VLAN Group VID[...]

- 39 - Setup steps 1. Create VLAN Group: Set VLAN Group 1 = default-VLAN with VID (VLAN ID) =1. Add two VLANs – VLAN 2 and VLAN 3, VLAN Group 2 w ith VID= 2 , VLAN Group 3 with VID= 3. Figure 4-31 Add new VLAN Group Screen[...]

- 40 - VLAN 2 : Port-1,Port-2 and Port-3 . VLAN 3 : Port-4, Port-5 and Port-6 . VLAN 1: All other ports – Port-7~Port-18. Figure 4-32 Assign VLAN members for VLAN 2 and VLAN 3 Please remember to remove the Port 1 – Port 6 from VLAN 1 membership, since the Port 1 – Port 6 had been assigned to VLAN 2 and VLAN 3. Figure 4-33 Remove specify orts [...]

- 41 - # Notice: ping setting. Its import to remove the VLAN member port from VLAN 1 group. Or the ports w ould become overlap- 3. Assign PVID for each port: Port-1,Port-2 and Port-3 : PVID= 2. Port-4,Port-5 and Port-6 : PVID= 3. Port-7~Port-18: PVID= 1. 4. Enable VLAN Tag for specific ports Link Type: Port-3 (VLAN-2) and Port-6 (VLAN-3). The Per P[...]

- 42 - T wo separate 1. Based on t te VLAN group example above, VLAN 2 and VLAN 3 member port cannot see each other. 2. The member ports from VLAN 2 and VLAN 3 need to access one public server . 802.1Q VLAN w ith overlapping area scenario he two sep ara Figure 4-35 A Server connect to the VLAN overlapping area 1. Specify Port-7 on the Web Smart PoE[...]

- 43 - 3. Define a VLAN 1 as a “Public A rea” that overlapping with both VLA N 2 members and VLA N 3 members . Figure 4-37 VLAN 1 – The public area member assign 4. Setup Port-7 with “ PVID=1 ” at VLAN per Port Conf iguration page. The screen in Figure 4-38 appears.[...]

- 44 - Figure 4-38 Setup Port-7 with PVID-1 rt-3 and VLAN 3 members: Port-4 to Port Although the VLAN 2 members: Port-1 to Po -6 also belongs to VLAN 1. But w ith different PVID settings, packets form VLAN 2 or VLAN 3 is not able to access to the other VLAN.[...]

- 45 - 4.4.2 Port Based VLAN This section introduces detail information of Port Based VLAN function of Web Smart PoE Switch; Choose “Port Based VLA N” from VLAN from the VLAN Mode and press “Apply” button to enable the port based VLAN function. T he screen in Figure 4-39 & 4-40 appears and table 4-14 description the Port Based VLAN obje[...]

- 46 - Table 4-14 Descriptions of the Port Based VL AN Configuration Screen Objects Port Based VLAN Setting example: VLAN scenario 1. Port 18 is the file server port for all the workst ations 2. Port 1 to port 17 is different dev ices that do not need to see each other Setup step s 1. Port Setting 1.1 Assign VLAN 1 for the first VLAN group with por[...]

- 47 - 4.4.3 MTU VLAN troduces detail information of MTU VLAN b Smart PoE Switch; Choose “MTU” from VLAN the VLAN Mo The screen in Figure 4-41 appears and description the MT This section in function of We from table 4-15 de and press “Apply ” button to enable the MTU VLAN function. U VLAN objects of Web Smart PoE Switch. Figure 4-41 MTU VLA[...]

- 48 - 4-5 Trunk Setting bet ween devices, use the Link aggregation e link aggregation on the dev ices at both ends. When usi ng a port link aggregation, note that: 。 T he ports used in a link aggregation must all be of the same media type (RJ-45, 100 Mbps fiber). 。 T he ports that can be assigned to the same link aggregation have certain other[...]

- 49 - This function allows to con member ports. Also provid figuring t he trunk function. It provides up to tw o trunk groups and each trunk group provides 4 e four various Trunk Ha sh Algorithm policies for selection. The screen in Figure 4-42 appears and table 4-16 description the Trunk Setting objects of Web Smart PoE Switch. Figure 4-42 Trunk [...]

- 50 - 4-6 QoS Setting Quality of Service (QoS) is an advanced traffi c prioritization feature that allow s you to establish control over network traffi c. QoS enables you to assign various grades of netw ork service to different types of traffic, such as multi-media, video, protocol-specific, time critic al, and file-backup traffic. QoS reduces ba[...]

- 51 - 4.6.1 Priority Mode This section introduces detail information of Prio rity Mode of Web Smart PoE Sw itch; the screen in Figure 4-44 appears and table 4-18 descriptions the Priority Mode of Web Smart PoE Switch. Figure 4-44 Priority Mode Web Page Screen Table 4-18 Descriptions of the Priority Mode Screen Objects Object Description Priority M[...]

- 52 - 4.6.2 Class of Service Configuration on of Web Smart PoE Switch. This section introduces detail information of Class of Serv ice Configuration of Web Sm art PoE Switch; the screen in Figure 4-45 appears and table 4-19 descriptions the Class of Service Conf igurati Figure 4-45 Class of Service Confi guration Web Page Screen Table 4-19 Descrip[...]

- 53 - 4.6.3 TCP / UDP Port Based QoS This section introduces detail information of TCP / UDP Port Based QoS Configuration of Web Smart PoE Switch; the screen in Figure 4-46 & 4-47 appears and table 4-20 descriptions the TCP / UDP Port Based QoS Configuration of Web Smart PoE Switch. Figure 4-46 T CP / UDP Port Based QoS Configuration Web Page [...]

- 54 - Table 4-20 Descriptions of the TCP / UDP Port Based QoS Configuration Screen Objects Object Description Protocol Display different Protocol for define the QoS policy in option FTP(20,21) Provide F-I-F-O, Discard, Low , High options. SSH(22) Provide F-I-F-O, Discard, Low , High options. TELNET(23) Provide F-I-F-O, Discard, Low , High options.[...]

- 55 - 4-7 Security Filter ovides Security Filter of Web Smart PoE Sw itch; the screen in Figure 4-48 appears and table 4-21 de- e Security F This function pr scriptions th ilter of Web Smart PoE Switch. Figure 4-48 Security Filter Web Page Screen eb Page Screen Objects Table 4-21 Descriptions of the Security Filter W Object Description MA C Addres[...]

- 56 - 4.7.1 MAC Address Filter ress Filter of Web Smart PoE Switch. This section introduces detail information of MAC Addr ess Filter of Web Smart PoE Switch; the screen in Figure 4-49 appears and table 4-22 & 4-23 descriptions the MAC Add Figure 4-49 MAC Address Filter Web Page Screen Table 4-22 Descriptions of the MAC Address Filter Screen O[...]

- 57 - 4.7.2 TCP / UDP Filter This section introduces detail information of TCP / UDP Filter of Web Smart PoE Switch; the screen in Figure 4-50 appea and table 4-24 descriptions the TCP / UDP Filter C onfiguration of Web Smart PoE Switch. rs Figure 4-50 T CP / UDP Filter Web Page Screen[...]

- 58 - Table 4-24 Descriptions of the TCP / UDP F ilter Configuration Screen Objects Object Description Function Enable Allow to Disable or Enable the TCP / UDP Filter function. Default mode is Disable . Port Filtering Rule Allow to Forward or Block the Port Filtering Rule. Default mode is Block . Protocol Display different Protocol for def ine the[...]

- 59 - 4-8 Misc Operation This function provides M 4-25 de- itch. isc Operation of Web Smart PoE Switch; the screen in Figure 4-51 appears and table eb Smart PoE Sw scriptions the Misc Operation of W Figure 4-51 Misc Operation Web Page Screen Table 4-25 Descriptions of the Misc Oper ation Web Page Screen Objects Object Description Output Queue A gi[...]

- 60 - 4-9 POE Setting Pow er Management: In a power over Ethernet sy stem, operati ng power is applied from a power source (PSU-power supply unit) over the LAN infrastructure to powered devices (PDs), w hich are connected to ports. Under some conditions, the total output power required by PDs can exceed the maximum available pow er pr ovided by th[...]

- 61 - Table 4-26 Descriptions of the POE Setting Web Page Screen Objects Object Description Pow er limit mode Allow to configure pow er limit mode of W eb Smart PoE Switch. It can choose :  Port Priority Deliver PoE pow er by port priority setting  Total Limit . Set limit value of the total POE port provided pow er to the PDs. For Web Smart [...]

- 62 - 4-10 Logout Web lowing screen appears in Figure 4-53 & 4-54 eb Screen appears. Please re-login the Web Smart PoE Sw This section provide logout func tion on Web Smart PoE Switch, after choose this function and the fol . Please press “Logout” button to take effect and Login W itch for further management. Figure 4-53 Logout Web Page Sc[...]

- 63 - 5. SWITCH OPERATION The Switch is implemented w ith an address table. This address table composed of many entries. Each entry is used to store the address information of some node in network, including MAC address, port no, etc. This information comes from the learning proce ss of Ethernet Switch. 5.2 Learning When one packet comes in from a[...]

- 64 - 6. POWER OVER Based on the global standard IEEE 802.3af, PoE is a technology netw carri and Wireless Networking, can help enterpris es improve productivity . It minimizes wi res that must be used to install the netw rk for offering low er cost, and less power failures. alled Data Terminal equipment (DTE) power via Media dependent interface ([...]

- 65 - The data pairs are used. Since Ethernet pairs are tra center tap of the isolat ion transformer without upsetti and the pair on pins 1 and 2 can be of either polarity. nsformer c oupled at each end, it is possi ble to apply DC power to the ng t he data transfer. In this mode of operation the pair on pins 3 and 6 Figure 2 - Power Supplied over[...]

- 66 - 7. THE POE PROVISION PROCESS While adding PoE support to networked devices is relatively pai nless, it should be realized that power cannot simply be transferred over existing CAT-5 cables. Without proper preparati on, doing so may result in dam age to devices that are not designed to support provision of power over their netw ork interfaces[...]

- 67 - 7.3 Start-up h frequencies) woul d introduce noise on the data uring normal operation, the PSE prov ides 44-57 VDC, able to support a minimum of 15.4 watts pow er. The IEEE 802.3af standard defines handling of overload conditions. In the event of an dra p el than the allo Watts), or an outright short circuit caused by a fa ilure in cabling o[...]

- 68 - 8. TROUBLESHOOTING net This chapter contains information to help you solve issues. If the Switch is not functioning pr operly, make sure the Ether Switch w as set up according to instructions in this manual. The Link LED is not lit heck the cable connection and remo ve duplex mode of the Switch. Solution: C Some st ations cannot t a lk to ot[...]

- 69 - APPENDIX A NETW T ORKING CONNECTION A.1 Switch‘s RJ-45 Pin Assignments 1000Mbps, 1000Base Contact MDI MDI-X 1 BI_DA+ BI_DB+ 2 BI_DA- BI_DB- 3 BI_DB+ BI_DA+ 4 BI_DC+ BI_DD+ 5 BI_DC- BI_DD- 6 BI_DB- BI_DA- 7 BI_DD+ BI_DC+ 8 BI_DD- BI_DC- 10/100Mbps, 10/100Base-TX RJ-45 Connector pin assig nment Contact MDI Media Dependant Interface MDI-X Med[...]

- 70 - There are 8 wires on a standard UTP/STP ca and color of straight cable and crossover cable ble and each wire is color-coded. The following show s the pin allocation connection: Straight Cable SIDE 1 SIDE2 SIDE 1 12345678 12345678 SIDE 2 1 = White / Orange 2 = Orange 3 = White / Green 4 = Blue 5 = White / Blue 6 = Green 7 = White / Brown 8 = [...]

PLANET TECHNOLOGY CORPORA TION e-mail: sales@planet.com.tw http://www .planet.com.tw EC Declaration of Conformity For the following equipment: *T ype of Pro duct: 16-Port 10/100Base-TX + 2G TP/SFP Combo Web Smart PoE Switch *Model Number: FGSW -1828PS * Produced by: Manufacturer‘s Name : Planet T echnology Corp. Manufacturer‘s Address: 1 1F , N[...]

PLANET TECHNOLOGY CORPORA TION e-mail: sales@planet.com.tw http://www .planet.com.tw 1 1F , No. 96, Min Chuan Road, Hsin Tien, T aipei, T aiwan, R. O.C. T el:886-2-2219-9518 Fax:886-2-2219-9528 EC Declaration of Conformity For the following equipment: *T ype of Product : 16-P ort 10/100Mbps / 8-Port PoE Web Smart Ethernet Swi tch *Model Number : FN[...]