Planet VIP-5060PT инструкция обслуживания

Professional HD PoE IP Phone (6-Line) VIP-5060PT[...]

Professional HD PoE IP Phone VIP-5060PT - 2 - Copyright Copyright (C) 2013 PLANET T echnology Corp. All rights reserved. The products and programs d escribed in this User ’s Manual are licensed pr oducts of PLANET T echnology , This User ’s Manual contains proprietary information protected b y copyright, and this User ’s Manual and al l accom[...]

Professional HD PoE IP Phone VIP-5060PT - 3 - view of Saving the Energ y and reducing the unnecess ary power consumpt ion, it is strongly sugg ested to switch off or remove the DC-plug from the device if th is device is not intended to be ac tive. WEEE W arning T o avoid the potential effects on the environment and human health as a result of the p[...]

Professional HD PoE IP Phone VIP-5060PT - 4 - Table of Contents 1  INTRODUCTION .............................................................................................................................. 7  1.1  F EA TUR ES ..................................................................................................................[...]

Professional HD PoE IP Phone VIP-5060PT - 5 - 5.2  B AN A NONYMOUS C ALL ........................................................................................................... 36  5.3  D IAL P LAN ............................................................................................................................... . 36  5.[...]

Professional HD PoE IP Phone VIP-5060PT - 6 - 9  APPENDIX ...................................................................................................................................... 97  9.1  D IGIT - CHARACTER MAP T ABLE .................................................................................................. 97  9.2[...]

Professional HD PoE IP Phone VIP-5060PT - 7 - 1 Introduction Cost-effective, High-performance Po E V oIP Phone T o build high-performance V oIP communications at a low cost, PLANET has launched a new member of its IP Phone fam ily , the VIP-5060PT enterprise-class 6-Line PoE IP Phone. It complies with IEEE 802.3af PoE interface for flexible deploym[...]

Professional HD PoE IP Phone VIP-5060PT - 8 - High Quality HD V oIP V oice The VIP-5060PT delivers HD voice (High-Definition V oic e) which is the next generation of voice quality for telephony audio, making the quality of voice better than that (toll quality) of the standard digit al telephony and even close to that of a room conve r sation. HD vo[...]

Professional HD PoE IP Phone VIP-5060PT - 9 - Secure, High-Quality V oIP Communication The VIP-5060PT can ef fortlessly de liver secured toll voice quality by utilizing cutti ng-edge 802.1p QoS (Quality of Service), 802.1Q VLAN t agging, and IP T O S (T ype of Service) technology . Using voice and data VLAN can easily sep arate the data and voice, [...]

Professional HD PoE IP Phone VIP-5060PT - 10 - 1.1 Features 1.1 Features ¾ Highlight s  Dual 10/100/1000 Gigabit Ethernet (W AN, LAN)  Supports SIP 2.0 (RFC3261)  Supports six SIP voice lines  IEEE 802.3af Power over Ethernet compliance  Supports mul tiple road calls waiting in line  Supports HD voice  Supports S RTP and Busy [...]

Professional HD PoE IP Phone VIP-5060PT ¾ SIP Applicati ons  Call forward / T r ansfer (blind/ attended)  Call Holding / W aiting  3-wa y conference  Paging and Intercom  Call park / Call pickup / Join call  R edial and click to dial  Secondary dialing automatically  Incoming calls /outgoing calls / mi ssed calls (Each supp[...]

Professional HD PoE IP Phone VIP-5060PT - 12 -  Local and R emote Syslog (RFC 3164)  SNTP Time Synchroniza tion  TR069[...]

Professional HD PoE IP Phone VIP-5060PT - 13 - 1.2 Application 1.2 Application Enterprise IP PBX Deployment of VIP-5060PT[...]

Professional HD PoE IP Phone VIP-5060PT - 14 - 1.3 Product Specifications 1.3 Product Specifications Product VIP-5060PT Hardware Lines (Direct Numbers) 6-Line enterprise-class IP phone Display 80 x 43mm/ 128 x 64 pixel LCD with blue backlight Feature Keys 4 line keys 8 DSS keys 4 Soft K eys 12 dialing buttons (0~9, *, #) 12 fixed function buttons W[...]

Professional HD PoE IP Phone VIP-5060PT - 15 - V oice Gateway SIP version 2 (RFC 3261, 3262, 3263, 3264) SIP supported STUN (RFC 3489) Message W aiting Indicator (RFC 3842) V oice al gorithms: - G .71 1 (A-la w and μ -law ) - G .7231 high/l ow - G .729a/b - G .722.1 - G .726 Dual-T on e Multi-Frequenc y (DTMF), In-Band and Out-of-Band (RFC 2833) ([...]

Professional HD PoE IP Phone VIP-5060PT - 16 - Support 5 ext. consoles with each consisting of 26 keys Soft keys programmable; function keys programmabl e Multilanguage realizes loc alization Echo cancellation: Supports G .168, and Hands-free can support 96ms, Hands-free S peaker Phone Supports V oice Gain Setting, V AD, CNG Full duplex hands-free [...]

Professional HD PoE IP Phone VIP-5060PT - 17 - Network Featu res W AN/LAN: 10/100M Ethernet ports , supports Bridge modes. Supports bridge working as hub Supports PPPoE for xDSL and PoE Supports 802.1 VLAN(voice VLAN/data VLAN) Supports DHCP client on W A N Supports main DNS and secondary D NS server . Supports DNS Relay , SNTP Client, Firewall, op[...]

Professional HD PoE IP Phone VIP-5060PT - 18 - 1.4 Physical specifications and p ackaging Physical Specifications ¾ Dimensions Dimensions 290 (L) x 260 (W) x 60 (H) mm Net Weight 950g (without p ackage) BASIC P ACKAGING  SIP IP Phone unit  Power Adapter  Quick Installa tion Guide  CD-ROM containing the on -line manual.  RJ-45 cable [...]

Professional HD PoE IP Phone VIP-5060PT - 19 - 1.5 Keypad ¾ Keyp ad, LED, and function key definitions ¾ Keyp ad Description Key Key Nam e Function Description Navigation Assists you i n selecting an it em that you want to p rocess under the menu by pressing the Up, Down, Righ t or Left button. Press the center button to save. Directory Access to[...]

Professional HD PoE IP Phone VIP-5060PT - 20 - Key Key Nam e Function Description mode. Mute Press this key in calling mode and you can h ear the other side, but the other side cannot hear you . Volume -/+ Turn down or turn up the volume by pressing the “-“ key or the “+” key. Redial 1. In the hook off /hands-free mode, use the key to dial [...]

Professional HD PoE IP Phone VIP-5060PT - 21 - ¾ Rear view and panel desc riptions ¾ Keyp ad Description Port Port name Description Power switch Input: 5V AC, 1A WAN 10/100/1000M Connect it to Network LAN 10/100M/1000 Connect it to PC External console interface Port type: RJ-11 direct connector Headset Port type: RJ-9 connector Handset Port type:[...]

Professional HD PoE IP Phone VIP-5060PT - 22 - 1.6 Icon introduction Icon Description Call out Call in Call hold Auto answer Call mute Contact DND(Do not Disturb) In hand-free mode In handset mode In headset mode SMS Missed call Call forwar d 1.7 LED introduction T able 1 Programmable Key LED for BLF LED St atus Description Steady green The object [...]

Professional HD PoE IP Phone VIP-5060PT - 23 - T able 2 Programmable key LED for Presence LED St atus Description Steady green The object is online. Slow blinking red The object is ringing. Steady red The object is active. Fast blinking red The object failed. Off No subscription T able 3 Programmable key LED for line LED St atus Description Steady [...]

Professional HD PoE IP Phone VIP-5060PT - 24 - 2 Initial Connection and Login Step 1. Handset Connection Plug one end of the handset cord into the handse t and the other end into the ha ndset jack Step 2. Connecting Power System The VIP-5060PT can be p owered either by external AC/DC adapter or by conne cting to an IEEE802.3af/at PSE device such as[...]

Professional HD PoE IP Phone VIP-5060PT - 25 - Step 4. Computer Network Setup Set your computer’s IP address to 192.168.0.x, wher e x is a number between 2 to 254 (except 1 where is being used for the phone by default). If you don’t know how to do this, please ask your network administrator. Connect your PC to VIP-5060PT PC port. Step 5. Login [...]

Professional HD PoE IP Phone VIP-5060PT - 26 - 3 Basic Functions 3.1 Making a call 3.1.1 Call Device User can make a phone call via the following device s: 1. Pick up the handset, icon will be shown on the idle screen. 2. Press the Speaker button, icon will be shown on the idle screen. 3. Press the Headset button if t he headset is connected to the[...]

Professional HD PoE IP Phone VIP-5060PT - 27 - 3.3 DND Press DND softkey to activate DND Mode. Further in coming calls will be rejected and the displ ay shows: icon. Press DN D softkey twice to deactivate DND m ode. User can find the incoming call record in the Call History. 3.4 Call Forward This feature allows User to forward an in coming call to [...]

Professional HD PoE IP Phone VIP-5060PT will be shown on the LCD. Then the called will not hear User, but User can he ar the called. Press it again to get the phone to normal conversation. 3.8 Call transfer 1. Blind Transfer During talking, press the key “Transf”, and then dial the number that User wants to transfer to, and finish by pressing &[...]

Professional HD PoE IP Phone VIP-5060PT - 27 - 3.3 DND Press DND softkey to activate DND Mode. Further in coming calls will be rejected and the displ ay shows: icon. Press DN D softkey twice to deactivate DND m ode. User can find the incoming call record in the Call History. 3.4 Call Forward This feature allows User to forward an in coming call to [...]

Professional HD PoE IP Phone VIP-5060PT - 28 - 3.7 Mute Press Mute button during t he conversation, icon will be shown on the LCD. Then the called will not hear User, but User can he ar the called. Press it again to get the phone to normal conversation. 3.8 Call transfer 1. Blind Transfer During talking, press the key “Transf”, and then dial th[...]

Professional HD PoE IP Phone VIP-5060PT - 31 - *3* is appointed prefix code. After maki ng the above configuration, A can dial *3* plus B’s phone number to make the redial function . *4* is appointed prefix code. After configuratio n, A can dial *4* to cancel redial function. User can set prefix at random, in case it does not affect the current d[...]

Professional HD PoE IP Phone VIP-5060PT - 32 - 3. After viewing the new message, User can pr ess Re ply to reply the message, and use the 2aB softkey to change the Input Method. When entering th e reply message, press OK, and then use the navigation keys to select the line fr om which User wants to send, then Send. 4. If User wants to write a messa[...]

Professional HD PoE IP Phone VIP-5060PT - 33 - 4.9 Programmable Key Configuration The phone has 4 programmable keys which a re able to set up many functions. The following list shows the functions User can set on the programm able keys and provides a description for each function. The default configuration for each key is N/A which mean s the ke y [...]

Professional HD PoE IP Phone VIP-5060PT - 34 - Call Park 1. User needs to set a server number when User ha s set what represents Call p ark. If User has a call but busy to re ceive the call, User can press t he key and hear a num ber. Then User can choose another phone and input this number, so User can directly recover call. 2. Set the type as Lin[...]

Professional HD PoE IP Phone VIP-5060PT - 35 - 6. Set the type as BLF List Key It needs the cooperation with the Broa dsoft server. The traditional BLF is that every number will need to be subscribed, so if the numbers that are subscr ibed are so many, it will cause obstruction. Howe ver, BLF List Key will put the numbers that are needed to be subs[...]

Professional HD PoE IP Phone VIP-5060PT - 36 - 5 Other Functions 5.1 Auto Handdown 1. Press Menu Æ Features Æ Enter Æ Auto Handdown Æ Enter. 2. Set the Mode Enable through the navigation key, then set Time, unit is minute, then pre ss Save. 3. When the call ends, after the time that User has set, the phone will return to the idle mode. 5.2 Ban [...]

Professional HD PoE IP Phone VIP-5060PT - 37 - 5.5 Auto Redial 1. Press Menu Æ Features Æ Enter Æ Auto Redial Æ Enter . 2. Choose Mod e Enabled or Disabled through the nav igation key . If User chooses Enable, User also needs to set Interval and T imes, and then press Save. 3. Af ter enabling auto redial t o call out someone, if he is in busy ,[...]

Professional HD PoE IP Phone VIP-5060PT - 38 - others and need to input the DTMF , the DTMF will show as User has set. 5.10 Ban Outgoing 1. Press Menu Æ Features Æ Ban Outgoing Æ Enter. 2. Enable this function; User cannot call any number. 5.11 Pre Dial 1. Press Menu Æ Features Æ Pre Dial Æ Enter. 2. Enable this function and User will realize[...]

Professional HD PoE IP Phone VIP-5060PT - 39 - 6 Basic settings 6.1 Keyboard 1. Press Menu Æ Settings Æ Enter Æ Basic Settings Æ Enter Æ Keyboard Æ Enter. 2. There are four items: DSS Key settings, Programmable Keys, Desktop Long Pressed, SoftKey, and User can set up respectively on them. Press the key Enter to the interface, then use the nav[...]

Professional HD PoE IP Phone VIP-5060PT - 40 - 2. User has two options to choose from: Auto and Manu al. Use the navigation keys to choose, and then press Save. 6.6 Greeting Words 1. Press Menu ->Settings Æ Enter Æ Basic Settings Æ Enter Æ Greeting Words Æ Enter. 2. User can enter the message and pre ss Save. It will display on the phone sc[...]

Professional HD PoE IP Phone VIP-5060PT - 41 - 7 Advanced Settings 7.1 Account s Press Menu Æ Enter Æ Advanced settings, and then input the pas sword to enter. The default password is 123 . User can set it through the web page. Then choose Account and then press En ter. User can do some sip settings. 7.2 Network Press Menu Æ Enter Æ Advanced se[...]

Professional HD PoE IP Phone VIP-5060PT - 42 - 8 Web Configuration 8.1 Introduction of configuration 8.1.1 Ways to configure The VIP-5060PT has three different ways for differen t users. z Use phone keypad. z Use web browser (recommended way ). z Use telnet with CLI command. 8.1.2 Password Configuration There are two levels to access to phone: root[...]

Professional HD PoE IP Phone VIP-5060PT - 43 - left side of the screen to save User configuration. Otherwise, the phone will lose User modification after power is off and on. 8.3 Configuration via WEB 8.3.1 BASIC 8.3.1.1 STATUS Status Field name Explanation Network Shows the confi guration information on WA N port, including the connect mode of WAN[...]

Professional HD PoE IP Phone VIP-5060PT - 44 - 8.3.1.2 WIZAR D Wizard Please select the prope r network mode ac cording to the network condition. The VIP-5060PT provides three di fferent network settings: z Static: If User ISP server provides User with t he static IP address, please select this mode, and then finish Static Mode setting. If User doe[...]

Professional HD PoE IP Phone VIP-5060PT - 45 - IP Address Input the IP addr ess distributed to User. Subnet Mask Input the subnet mask distributed to User. IP Gateway Input the Gateway address distributed t o User. DNS Domain Set DNS domain postfix. When the domai n which User input cannot be parsed, phone will automatical ly add this domain to the[...]

Professional HD PoE IP Phone VIP-5060PT - 46 - Display detailed information about User manual config. Choose DHCP mode and click Next to c onfig SIP (default SIP1) si mply. Click Back to return to the last page, like static IP mode. Choose PPPoE mode and click Next to config the PPPoE account/password an d SIP (default SIP1) simply. Click Back to r[...]

Professional HD PoE IP Phone VIP-5060PT - 47 - 8.3.1.3 CALL LOG User can check all the outgoing call s on this page shown below: Call Log Field name Explanation Start Time Display the start time of the outgoing record. Duration Display the conversation time of the outgoing record. Dialed Calls Display the account/protocol/line of the outgoing recor[...]

Professional HD PoE IP Phone VIP-5060PT - 48 - The maximum length of the greeting me ssage is 12 English chara cters and 5 Chinese characters. 8.3.2 NETWORK 8.3.2.1 WAN WAN Status[...]

Professional HD PoE IP Phone VIP-5060PT - 49 - Current Subnet Mask The current Network mask address. MAC Address The current MAC address of the phone. Current IP Gate way The current Gateway IP address. MAC Timestamp Shows the time of getting MAC address Please select the prope r network mode ac cording to the network condition. The VIP-5060PT prov[...]

Professional HD PoE IP Phone VIP-5060PT - 50 - DNS Domain cannot be parsed, phone will automatical ly add this domain to the end of the domain which User input before and parse it again. Primary DNS Input User primary DNS server addre ss. Secondary DNS Input User standby DNS server address. If User uses PPPoE m ode, User need to make the above sett[...]

Professional HD PoE IP Phone VIP-5060PT - 51 - In chart 1, there is a layer 2 that switches go wit hout setting VLAN. Any broadcast frame will be transmitted to the other ports exce pt the send port. For example, a broadcast information is sent out from port 1 then transmitted to ports 2, 3 and 4. In chart 2, red and blue indicate two dif ferent VL[...]

Professional HD PoE IP Phone VIP-5060PT - 52 - QoS Configuration Link Layer Discovery Protocol (LLDP ) Settings Enable LLDP Enable LLDP by selecting it. Enable Learning Function After enablin g LLDP Learn, telephone can automati cally learn the data of DSCP , 802.1p, VLAN ID from the switch. If the data is different from the data of the LLDP server[...]

Professional HD PoE IP Phone VIP-5060PT - 53 - different from W AN ID. LAN Port VLAN ID S pecify the value of the Port VLAN ID different from W AN ID, the range of the value is 0-4095. 8.3.2.3 SERVICE PORT User can set the port of telnet/HTTP/RTP on this page. SERVICE PORT Field name Explanation Service Port Settings Web Server Type S pecify Web Se[...]

Professional HD PoE IP Phone VIP-5060PT - 54 - 1) User needs to save the configuratio n an d reboot the phone after setting this pa ge. 2) Please reboot the system if Use r modifi es the HTTP or telnet port number (the new number should be greater t han 1024). 3) If User set s 0 for the HTTP port, it will disable HTTP service. 8.3.2.4 TIME&DATE[...]

Professional HD PoE IP Phone VIP-5060PT - 55 - phone will automatically synch ronize the standard tim e. Primary Server Set SNTP Primary Server I P address. Secondary Serv er Set SNTP Secon dary Server IP address. Time Zone Select the T ime zone acco rding to User location. Resync Period Set the time out, the default is 60 seconds. 12 -Hour Clock S[...]

Professional HD PoE IP Phone VIP-5060PT - 56 - 8.3.3 VOIP 8.3.3.1 SIP Set User SIP server in the following interface.[...]

Professional HD PoE IP Phone VIP-5060PT - 57 - SIP Config Field name Explanation SIP Line Choose line to set info about SIP , there are 4 lines to choose. User can switch by 【 Load 】 button. Basic Settings Status Shows if the phone has been regi stered the SIP server or not;[...]

Professional HD PoE IP Phone VIP-5060PT - 58 - or so, show Unapplied. Server Address Input User SIP serve r address. Server Port Set User SIP server port. Authentication User Input User SIP registe r account name. Authentication Password Input User SIP registe r password. SIP User Input the phone number assigned by User V oIP service provider . Pho[...]

Professional HD PoE IP Phone VIP-5060PT - 59 - Time T ype is No answer , in coming calls will be forwarded af ter the no answer forward wait time. Enable Hot Line S pecify Hot Line by selecting it. Hot Line Number S pecify Hot Line Number , the phone dial the hot line number automatically at hands-free mode or handset mode af ter warm line time. Wa[...]

Professional HD PoE IP Phone VIP-5060PT - 60 - please enter the On Code and Of f Code option, then when User choose to enable/disable following function on User IP phone, it will send message to the server , and the server will turn on/off the function im mediately . DND On Code Set the DND On Code, When User p ress the DND hot key , the phone will[...]

Professional HD PoE IP Phone VIP-5060PT - 61 - Anonymous On Code Set the Anonymous On Code, When User choose to enabl e the anonymous call function on User IP phone, it will send information to the server, and the server will enable the anonymous call function for User IP phone automati cally. Anonymous Off Code Set the Anonymous Off Code, When Use[...]

Professional HD PoE IP Phone VIP-5060PT - 62 - Keep Authentication Enable/Disable Keep Authenticatio n System will t ake the last authentication field which is p assed the authentication by server to the request packet. It will decrease the server ’s repeat authorization work, if it is enable. Answer With A Single Codec Enable/Disable the functio[...]

Professional HD PoE IP Phone VIP-5060PT - 63 - 8.3.3.2 STUN In this web page, Users can co nfig SIP STUN. STUN: By STUN server , the phone in pr ivate network could know the type of mapping IP and port of SIP . The phone might register it self to SIP server with global IP and port to realize the device both callin g and being called in private netw[...]

Professional HD PoE IP Phone VIP-5060PT - 64 - penetrate NA T , while False means not. Server Address Set User SIP STUN Server IP address. Server Port Set User SIP STUN Server Port. Blinding Period(s) Set STUN blinding period(s). If NA T server finds that a NA T mapping is idle after time o ut, it will release the mapping and the system need send a[...]

Professional HD PoE IP Phone VIP-5060PT - 65 - T o save the memory and avoid abundant i nput of user , add the follow functions: 1.* Match any single digit that is dialed. If user makes the above configuration, after user dials 1 1 digit numbers started with 13, the phone will send out 0 plus the dialed numbers automati cally . 2 . [ ] S pecifies a[...]

Professional HD PoE IP Phone VIP-5060PT - 66 - desired prefix number and T ; then dial the prefix and a phone number to realize calling to what Use r prefix number is mapped. The prefix number support s at most 30 digits. Destination Set Destination address. T his is opt ional config item. If User want to set peer to peer call, please input de stin[...]

Professional HD PoE IP Phone VIP-5060PT - 67 - Examples of different alias applications Set by web Explanation Example User need set phone number, Destination, Alias and Delete Length. Phone number is XXXT; Destination is 255.255.255. 255 (0.0.0.2) and Alias is del. This means any phone No. that starts with User set phone number will be sent via SI[...]

Professional HD PoE IP Phone VIP-5060PT - 68 - If User dialed phone number starts with User set phone number. The phone will send out User dialed phone number adding suffix number. When User dial “147”, the SIP1 server will receive “1470011”. 8.3.4 PHONE 8.3.4.1 AUDIO On this page, User can configure voice codec, input/output volume and so [...]

Professional HD PoE IP Phone VIP-5060PT - 69 - Handset Input V olume S pecify Input (MIC) V olume grade. G729AB Payload Length Set G729 Payload Length. Onhook T ime S pecify the least reflection time of Hand down, the default is 200ms. Default Ring T ype Select Ring T ype. Handset Output V olume S pecify Output (receiver) V olume grade. S peakerpho[...]

Professional HD PoE IP Phone VIP-5060PT - 70 - FEATURE Field name Explanation Do Not Disturb Select DND, the phone will reject any incoming call, the callers will be reminded by busy , but any outgoing call from the phone will work well. Ban Outgoing If User select Ban Outgoing to enable it, and Use r cannot dial out any number . Enable Call Transf[...]

Professional HD PoE IP Phone VIP-5060PT - 71 - Auto Redial interval S pecify the Auto Redial interval. Auto Redial Times S pecify the Auto Redial interval. Auto Headset Open this function, if there is a headphones in VIP-5 060PT, User can press “ answer” key or line key to answer a call with the headset Enable Call Completion Enable Call Comple[...]

Professional HD PoE IP Phone VIP-5060PT - 72 - After the p assword prefix will be hidden as *, N stand for the value which User enter in the Password Length fi eld. For example: User set the password p refix is 3, enter the Pass word Length is 2, then User enter the number 34567, it will di splay 3**67 on the phone. Password Dial Prefix S pecify th[...]

Professional HD PoE IP Phone VIP-5060PT - 73 - 8.3.4.3 DIAL PLAN This system support s 4 dial modes: 1) End with “#”: dial User desi red number , and then press #. 2) Fixed Length: the phone wi ll intersect the num ber according to User specified length. 3) T ime Out: After User stop dialing and waiting time out, system will send the number col[...]

Professional HD PoE IP Phone VIP-5060PT - 74 - Send after （ 3-30 ） seconds Set the timeout of the last dial digit. The call will be sent after timeout. Press # to Do Blind Transfer Enable Blind T ransfer On Hook, when executing Blind T ransfer End with #, press # after inputting the nu mber that User want to transfer , the phone will transfer t[...]

Professional HD PoE IP Phone VIP-5060PT - 75 - 8.3.4.4 CONT ACT User can input the name, phone number and select ri ng type for each name here. Contact Field name Explanation Phonebook Table Name Shows the name correspon ding to the phone number.[...]

Professional HD PoE IP Phone VIP-5060PT - 74 - Send after （ 3-30 ） seconds Set the timeout of the last dial digit. The call will be sent after timeout. Press # to Do Blind Transfer Enable Blind T ransfer On Hook, when executing Blind T ransfer End with #, press # after inputting the nu mber that User want to transfer , the phone will transfer t[...]

Professional HD PoE IP Phone VIP-5060PT - 77 - The add button for adding a new bl acklist, the del ete button for deleting one item, the delete all button for deleting all items. If user does not want to answer some p hone calls, add these phone numb ers to the Black List, and these calls will be rejected x and are wild card x means matching any si[...]

Professional HD PoE IP Phone VIP-5060PT - 78 - Or Set the Phonebook Name as ldap, Server URL is ldap://192. 168.1.3/dc=winline,dc=com. Remote Phonebook Setting Phonebook Name Custom the phonebook name displayed on the phone . Server URL S pecify the server url of the remote phonebook. SIP Line S pecify the sip line for the remote phonebook. Authent[...]

Professional HD PoE IP Phone VIP-5060PT - 79 - greater than 1024 If multicast codec is G722, the LCD screen will di spla ys "HD", which means the phone is sending high-definition voice stream Operate steps: 1. When the phone is idle, press multicast key Multicast RTP stream is send to pre-configure d multicast address (IP: Port). The phon[...]

Professional HD PoE IP Phone VIP-5060PT - 80 - enabled, the phone will automatically ign ore all incoming multicast RTP stream. Web p age is set as follows: Now multicast “ss” has hig her priority than multicas t “ee”, the highest priority is for normal calls Notice: When a multicast session begin s, multicast sender and receiver will beep [...]

Professional HD PoE IP Phone VIP-5060PT - 81 - S pecify the Action URL that Record the operation of phone, send these correspo nding information to server , url:http://InternalServer /FileNa me.xml?(Internal Server is server ip, FileName is name of xml that contains the action message ) 8.3.5 FUNCTION KEY 8.3.5.1 FUNCTION KEY Function Key Field nam[...]

Professional HD PoE IP Phone VIP-5060PT - 82 - key Show the function key's serial number . T ype Memory Key: settings can be stored in key storage for each number , the standby or off-hoo k, select the function keys on the keyboard can call this numbe r . Line, set the dial mode (Auto, SIP1 to SIP6).Key Event functions, monitor st ate. DTMF: I[...]

Professional HD PoE IP Phone VIP-5060PT - 83 - 8.3.5.2 EXIT KEY EXT KEY has the same u sage with the Function key. “In” port connect s the phone, “Out” port conne cts the next one, if there is only, User don’t need for power supply, if there are more than one, User need supply 5V power for the first one, and use RJ-45 dire ct connector. 8[...]

Professional HD PoE IP Phone VIP-5060PT - 84 - 8.3.6 Maintenance 8.3.6.1 Auto Provision Planet endpoint support s PnP and DHCP and Phone Flas h to obtain the parameters. The PnP and DHCP and Phone Flash are all deployed, endpoint will go by the following process t o try to obtain the server address and other parameters, when it boots u p: DHCP opti[...]

Professional HD PoE IP Phone VIP-5060PT - 85 - Field name Explanation Auto Provision Setting Current Config Version Show the current config file’s version. If the version of the configuration downloaded is high er than the version of the running configurations, the auto provision would upgrade, or stop here. If the endpoints confirm t he config u[...]

Professional HD PoE IP Phone VIP-5060PT - 86 - PnP Interval Specify the Interval time, unit is hour. Phone Flash Server Address Set FTP/TFTP/HTTP server IP address for auto update. The address can be IP address or Domai n name with subdirectory. Config File Name Set configuration file’s name which ne ed to update. System will use MAC as config fi[...]

Professional HD PoE IP Phone VIP-5060PT - 87 - Syslog Configuration Field name Explanation Syslog Setting Server Address Set Syslog server IP address. Server Port Set Syslog server port. MGR Log Level Set the level of MGR log. SIP Log Level Set the level of SIP log. Enable Syslog Select it or not to enable or disable syslo g. Web Capture Start Clic[...]

Professional HD PoE IP Phone VIP-5060PT - 88 - 8.3.6.3 CONFIG Config Setting Field name Explanation Save Configuration User can save all changes of configurations. Click the Save button, all changes of configuration will be saved, and be effective immediately. Backup Configuration Right clicks on “Rig ht click here… ” and select “Save T arg[...]

Professional HD PoE IP Phone VIP-5060PT - 89 - 8.3.6.4 UPDATE User can update User configuratio n with User config file in this web page. Update Field name Explanation Web Update Web Update Click the browse button, find out the config file saved before or provided by manufacturer , download it to the phone directly , press “Update” to save. Use[...]

Professional HD PoE IP Phone VIP-5060PT - 90 - 1. Application update: download system to update file. 2. Config file export: Upload the config file to FTP/TFTP server, name and save it. 3. Config file import: Download the config file to phone from FTP/TFTP server. The configurat ion will be effective after the phone is reset. 4. Phone book export ([...]

Professional HD PoE IP Phone VIP-5060PT - 91 - Access Configuration Field name Explanation Keyboard Password Set the password for entering the setting menu of the phone by the phone‘s key board. The password is digit. This t able shows the current user existed. User Set account user name. User Level Set user level, Root user has t he right to mod[...]

Professional HD PoE IP Phone VIP-5060PT - 92 - 8.3.7 SECURITY 8.3.7.1 WEB FILTER WEB Filter User could make some dev ice own IP , which is pre-specified, access to the MMI of the phone to config and manag e the phone. Field name Explanation Web Filter T able Settings: Add or delete the IP address segment s that access to the phone. Set initial IP a[...]

Professional HD PoE IP Phone VIP-5060PT - 93 - 8.3.7.2 FIREWALL Firewall Configuration In this web interface, User can set up firewa ll to prevent unauthorized Inte rnet users from accessing private networks co nnected to the Inte rnet (input rule), or prevent un authorized private network devices from accessi ng the Internet (o utput rule). Firewa[...]

Professional HD PoE IP Phone VIP-5060PT - 94 - Des Address Set the destination address. It can be IP address, network address, complete address 0.0.0.0, or network a ddress similar to *.*.*.*. Src Mask Set the source address’ mask . For example, 255.255.255.255 means just point to one host; 255.255.255.0 means p oint to a network which netwo rk I[...]

Professional HD PoE IP Phone VIP-5060PT - 95 - VPN Configuration Field name Explanation VPN IP Shows the current VPN IP address. Select L2TP . User can choose only one for current state. After Use r select it, User ’s better save configuration and reboot User phone. Enable VPN Select it or not to enable or disable VPN. VPN Server Address Set VPN [...]

Professional HD PoE IP Phone VIP-5060PT - 96 - 8.3.7.4 SECURITY Security Field name Explanation Update Security File Select Security File Select the security file User want to update, then click Update button to update. Delete Security File Select Security File Select the security file User w ant to delete, then click Delete button to update. SIP T[...]

Professional HD PoE IP Phone VIP-5060PT - 97 - 9 Appendix 9.1 Digit-character map table Keypad Character Keypad Character 1 @ 7 P Q R S p q r s 2 A B C a b c 8 T U V t u v 3 D E F d e f 9 W X Y Z w x y z 4 G H I g h i */. 5 J K L j k l 0 6 M N O m n o #/SEND 9.2 Frequently Asked Questions List Q1: No operation after po w er on? A1: Check if the po [...]

Professional HD PoE IP Phone VIP-5060PT - 98 - ITSP for more information or assistance. Q6: Cannot connec t to the configuration website? A6: Check if the Ethernet cable is properly conne cted. Check if the URL is right; the format of UR L is: http:// the Internet port IP address. Check if your firewall/NAT settings are correct. Check if the versio[...]

Professional HD PoE IP Phone VIP-5060PT - 99 - Q8: How to set up the BL F function in the VIP-5060PT? A8: Before we start, please be reminded y our IPPBX must also support BLF function. In Function key / EXT Key. Type: please chose Memory Key Value: your BLF extension Line: choose which line yo u want to use BLF function Subtype: BLF Pick up Number[...]

Professional HD PoE IP Phone VIP-5060PT - 100 - On VoIP / SIP page, please follow the messages below: SIP line: choose the line you want to register Server address: the IPX-2100 IP address Server port: Server register port default is 5060 Authentication user: 800 (the extension you create in IPX-2100) SIP user: (the extension you create in IPX-2100[...]