Precor P80 инструкция обслуживания

Oper ating and Maintaining the P80 C onsole Prec or Incorporated 20031 142nd A venue NE P .O . Box 720 2 W oodinville, W A USA 9807 2-4002 P80 OMG 301407 -14 1 27 June 2011[...]

[...]

Oper ating and Maintaining the P80 C onsole[...]

Edition Inf ormation OPERAT ING AND M AINTAIN ING THE P8 0 CONSO LE P/N 3014 07-141 rev C Copyright © June 2011 Precor Incorporated. All rights reserved. Specifications subject to change w ithout notice. Trademark Note Precor, AMT, and EFX are regist ered trademarks and Preva is a trademark of Precor Inc orporated. Other names in this document may[...]

Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laborator ies. Intellectual Property Notice All rights, title, and interests in and to the software of the Preva Business Suite, t he accom panying print ed materia ls, any copies of suc h softwar e, and all dat a colle cted v ia the Preva Busi[...]

[...]

Important Saf ety Instructions This apparatus (hereinafter referred to as the console) is intended to be shipped with new Precor exe rcise equipment (hereinafter referred to as the base unit). It is not pac kaged for in dividual sa le. WARNING To prevent injury, th e console must be attached securely to the base unit following all assembly and inst[...]

6 Operating and Maintaining the P80 Console y Il est conseillé de subir un examen médical complet avant d’entreprendre tout progra mme d’exercise. Si vo us avez d es étourdissements ou des f aiblesses, arrêtez les exercices immédiatement. y Do not allow children, or people unfam iliar with the operation of this equipment, on or ne ar it. D[...]

Important Safety Instructions 7 y Proper Location for E quipment à For all equipment other than treadmills: Locate at least 4 0 inches (1 met er) a way from walls o r furniture on either side of the equipment, and 40 inches ( 1 meter) away f rom obje cts beh ind the equipment. à For treadmill s: Locate at least 40 inches (1 meter) away from walls[...]

8 Operating an d Maintaining the P80 Console y Use the equipment only for its intended pu rpose as described in this manual. Do not use accessory attachments that are not recommended by Precor. Such attachments may cause injuries. y Do not operate the equipment where aerosol (spray) products are being used or where oxygen is be ing administered. y [...]

Important Safety Instructions 9 Product Recycling an d Disposal rded accord ing to an Dire ctive c rn the European WEEE Di rective, electric al d e his 5°C Radio Frequency Interfere nce (RFI) e following national cy Federal Communication s Commission, Part 15 e ate ause This equ ipment must be re cycled or disca applica ble lo cal an d natio nal r[...]

10 Operating and Maintaining the P80 Console Operation is subject to the following two conditions: (1) this device may not cause ha rmful interference, and (2) this device mus t accept any inte rference received, including interference that may cause undesired o peration. WARNING Per FCC rules, cha nges or modifications not expressly approved by th[...]

Important Safety Instructions 11 Regulatory Notices for Cardiovascular Exercise Equipment The reg ulat ory inf ormatio n in t his s ectio n appl ies to t he exercise equipment and its contro l console. Safety Approvals for Cardi ovascular Equip ment Precor e quipment has bee n tested and foun d to com ply with the following app licable safety stand[...]

12 Operating and Maintaining the P80 Console Industry Canada This Class A digi tal apparatus complies with Canadian ICES-003. Cet appareil numérique de la c lasse A est confor me à la n orme NMB-003 du C anada. ATTENTI ON: Haute Tension Débranch ez avant de répare r European Applicatio ns CE comp liance is c laimed t o th e follo wing direct iv[...]

Important Safety Instructions 13 Electrical Recommendations: 120 V and comme ndation only. NEC ( Nationa l E lectric d have received a power cable that meets y our local ual ur anch circ uit provides a hot conductor al 240 V Treadmills Note : T his is a re Code) gu ide lines or loc al r egion e lectr ic codes must be followe d. You shoul electrical[...]

14 Operating and Maintaining the P80 Console Electrical Recommendations: All Equipment Excludin g Treadmil ls Note : T his is a re commen dation only. NEC ( Nationa l E lectric Code) gu ide lines or loc al r egion e lectr ic codes must be followe d. For equipment fitted with a P80 console or Personal Viewing System (PVS) screen a separate power con[...]

T able of Cont ents Importan t Safety In structi ons ................................................... 5 Safety Precautions ................................................................................ 5 Hazardous Materials and P roper Disposal .................................... 8 Product Recycling and Disposal...............................[...]

16 Operating and Maintaining the P80 Console[...]

Chapter 1 Getting St art ed Importan t: Not all sett ings are currently available i n this release. More features will be a vailable in future software updates. The P80 console offers administrators and users the ability to set default settings that meet their specific needs. To accomplish this, the console supports setti ngs for different classes [...]

18 Op erating and Maintaining the P80 Console Identifying Parts of the Conso le The following diagram provides information a bout the console keys. The number and actions of the conso le keys may differ slightly depen ding on th e type of equ ipment. Before beginning any tness program, see your phy sician for a thorough physical examination. See[...]

Getting Started 19 Using the Treadmil l Safety Clip rent stop functions, If the user … Then the tread mill And th e console … The treadmill is equipped with two diffe which be have as fo llows: belt … Presses d own o n the red STOP b utt on Slows t o a st op Shows t hat t he t is exercise w orkou paused Pulls on the la nyard t Slows t o a st [...]

20 Operating and Maintaining the P80 Console If the restart switch trips durin g exercise, pe rform t he followin g steps: 1. Reattach the safety clip if necessary. 2. Press t he res tart swit ch do wn unt il it clicks , ret urning it t o its normal position. Note : If the restart s witch t rips, a ll info rmatio n abou t th e current workout is de[...]

Getting Started 21 Treadmill Auto Stop™ (Auto matic Stop) portan t: The default setting for this feature is ON. An gs; is designed to his s or resumes, the etected after an add itional 30 seconds, t he ding tdown, s weighing mo re than 90 pounds (41 kg) are re. Function Im administrator can t urn off th is feature in the System Settin however, Pr[...]

22 Operating and Maintaining the P80 Console[...]

Chapter 2 Configuring the S ys t em Settings Use the System mode to configure settings in ways that be ne fi t yo ur u se rs a nd your fa ci li ty. Th e S yst em m enu is visible only to administrators and registered service technicians. Changes made to these settings ar e saved to the fitness equipment. Importan t: A special code is required to ac[...]

24 Operating and Maintaining the P80 Console To view the S ystem m enu: 1. On the Welcome screen, press and hold Pau se . Figure 7: Pause key 2. While holding Pause , press each of the following key s once in the order presented. Refer ring to the diagram below, press: 1 2 3 4 Channel Up Volume Dow n Volume Up Channel Down 2 Figure 8: Settin gs sec[...]

Configuring the System Settings 25 About System information settings provide basic information f not To view the S ystem Info s ettings menu: ord to view the Table 2. Ab out setting s Setting Access Det ail including equipment models and serial numbers. Mos t o these settings are for informational purposes only and can be mod ified. 1. Use the admi[...]

26 Operating and Maintaining the P80 Console Setting Access Det ail Hea rtbe at Interva l Only Precor servic e techni cians can modify this setti ng. Determ ines how ofte n t he consol e communicat es with th e server . Minimum Hea rtbe at Interva l Only Precor servic e techni cians can modify this setti ng. Minim um num ber of time s th at the co [...]

Configuring the System Settings 27 To view the Us age setting s: 1. Use the administrator code and password to view the equipment settings. 2. Touch Equipment Usa ge . Table 3. Equipment Usage settings Setting Access Detail Cumulative Worko ut Seco nds Admin/T ech: View Total n umber of sec onds . Second s are coun ted when the worko ut cl ock sta [...]

28 Op erating and Maintaining the P80 Console Connectivity Configuring your audio, vid eo, and network infrastructure requires expertise. Precor strongl y recommends that you work with a qualified contractor to set up this infrastructur e. This setting provides the following information: y Network Type y Configuration y Status y IP Address y Preva [...]

Configuring the System Settings 29 Display These settings are configurable per console, but can also be t ers have logged in. e not moving. To view th e Display setti ngs: and password to view the gs , then touch Di splay . Setting Setting Defa ult configured using Preva™ B usiness Suite. The equipment mus be inactive before you can change the di[...]

30 Operating and Maintaining the P80 Console TV Settings Settings help you set up television channe ls for your users. annel annels To view TV Setting information: d password to view the gs . h Channel Guide . Channel Guide hannels in either or both of the following n for availa ble channe ls. cuss how to set up the channel To scan fo r avail able [...]

Configuring the System Settings 31 To delete a channel fr om the Channel Guide: 1. On the Channel G uide screen, touch the listing for the channel you want to delete . 2. Touch the Delete button t hat appears next to the listing. 3. When aske d “Are you sure ?", verify t hat you want to proceed, then touch Yes . Table 6. TV Settings Settings[...]

32 Operating and Maintaining the P80 Console Workout Limit settings are not associated with or saved as part of a user prof ile and users do not have a ccess to them. Both administrators and se rvice techn icians have view and modify access rights. To modify the Workou t Lim its settings : 1. Use the administrator code and password to view the equi[...]

Configuring the System Settings 33 Manage Settings Use this setting to save your equipment settings to a USB flash drive, or to import ne w features from a USB flash dr ive. To manage s ettings: 1. Use the administrator code and password to view the equipment settings. 2. Touch System Set tings , th en touch Manage Settings . 3. Press Sav e to USB [...]

[...]

Chapter 3 Intr oducing Users t o the P80 Console Importan t: Not all sett ings are currently available i n this release. More features will be a vailable in future software updates. The P80 console offers cle ar visuals and a touch-screen layout that encourages program exploration. Mu ltiple preset workouts are designed to help individual users mee[...]

36 Operating and Maintaining the P80 Console To use the touch heart rat e feature, place the palm o f your hands directly on the metal heart rate sensors on the equipm ent’s handle bars. T o ens ure a m ore acc urate heart rate rea dout, make s ure yo u follo w thes e tips : y Both hands must grip the sensors for your hea rt rate to regist er. y [...]

Introducing Users to the P80 Console 37 Using a Chest Strap Transmit ter WARNING Signals used by the Chest S trap T ransmitte r (or heart rate s trap) may in terfer e with pacemakers or other i mplan ted devices . Consult your p hysician and the manufact urers of your Ches t Strap T ransmi tter and i mplanted device before u sing a Ch est Strap Tra[...]

38 Operating and Maintaining the P80 Console Using the View Channels and View Buttons the s panels, icon bar, and the status he name of the C hannels button changes le, if you Changing Screen Vi ews appears at the bottom right of the workout There are three primary sc reen views that make certain information visible during your workout. You can cha[...]

Introducing Users to the P80 Console 39 Using the Medi a Panel Use the Media panel to sel ect a media source. To cho ose a media so urce : 1. On a Workout Progress pa nel, touch the Media icon, or slide the right edge of the next panel across the scre en. Figure 11: Media icon 2. The Media panel describes the current media selection. Navigate this [...]

40 Operating and Maintaining the P80 Console Connecting and Using Your iPod® vational music and contro l To connect your iPod: the connector at the top of the co nsole d 2. lugged into the d, 3. h the pause button. You can listen to your favorite moti your iPod directly from the console. 1. Insert the iPod into and place your iPod securely in the [...]

Introducing Users to the P80 Console 41 Using the Work out Progress Panel your workout. To retu rn to the Workou t Progress p anel: icon, or slide the ent media Use the Workout Progress panel to custom ize This is the first panel that displays once you se lect a workout or press GO . If you are on the Media pane l, there are two ways to return to t[...]

[...]

Chapter 4 Beginning Y our W ork out CAUTION: If you are using a trea dmill, be sure to attach the security clip to your clothing bef ore starting your workout. Importan t: Not all sett ings are currently available i n this release. More features will be a vailable in future software updates. The P80 console offers many different workout options. Th[...]

44 Operating and Maintaining the P80 Console Starting a Feat ured Workout The Featured Workout appears in a panel on the We lcome Screen. Use Featured Workouts to explore the f itness benefi ts of preset programs and to add variety to your workou t. To begin a Featured Work out, touch Go on the Fe atured Workout panel. Starting a Preset Workout Pre[...]

Beginning Your Workout 45 Table 10. Preset wo rkout descriptions Goal Workout Details Lose Weight Choose fr om se vera l course s desig ned to encour age weig ht lo ss. Be Fit Maintai n yo ur fit ness level s o y ou can s tay activ e and fit . Get Toned Tone your legs . Pick a focus of calf , thigh, or glut eal region. Push Performance Choo se a hi[...]

46 Operating and Maintaining the P80 Console 3. In the panel, touch Personal Info to enter your age and weight. Importan t: Not all sett ings are currently available i n this release. More features will be a vailable in future software updates. Table 11. Examples of Personal Information settings Setting Setting Options Default Value Access Deta il [...]

Beginning Your Workout 47 Adjusting the Workout Intensity To adjust the equipment incline, speed, and /or resistance, use the motion controls located just below the console keys. Figure 14: Motion controls Adjust the motion controls, upwa rd or downward, to change the incline, speed, or resistance. Figure 15: Adjust motion controls up or down Many [...]

48 Op erating and Maintaining the P80 Console Viewing Your Workout Status While Exercising nd is visible s isplayed as strides per minute, pace , or ow a measurement appe ars in the Status . To modify the sta tus mea surement us ing the Statu s Bar: n alternate display the Status Bar 3. e your d registered service technicians The Status Bar contain[...]

Beginning Your Workout 49 Scoring Your Fitness Workout u int erpre t you r sco re for th e Test determined by this formula: Rate of Table 12. Fitness scor e refe rence tables Age Low Fitness Male Low Fitness Female This in form ation h elps yo Your F itne ss workout. The score for this test is oxygen (O 2 ) consumption, in ml per minute, modified f[...]

[...]

Chapter 5 Maint enanc e To keep the equipment functioning properly, perform the minor maintenance tasks in this section at the intervals suggested. Failure to maintain the equipment as described in this section could void the Precor Limited Warranty. DANGER To reduce th e ris k of el ectrical shock, always disconnect the equipm ent from its p ower [...]

52 Operating and Maintaining the P80 Console Importan t: Do not use any acidic cleaners. Doing so will wea ken the paint or powder coatings and void the Precor Limited Warranty. Never pour w ater or spray liquids directly on the console or console ’s screen. y It is important to avoid using any corro sive chemicals on the console or screen. y Alw[...]

[...]

Oper ating and Maintaining the P80 C onsole Prec or Incorporated 20031 142nd A venue NE P .O . Box 720 2 W oodinville, W A USA 9807 2-4002 P80 OM 301407 -14 1 re v C, en 27 June 2011[...]

As sembling and Maintaining Elliptical Fitnes s Cr oss tr ainers ™ EFX ® 883 • EFX ® 833 • EFX ® 823 Prec or Incorporated 20031 142nd A venue NE P .O . Box 720 2 W oodinville, W A USA 9807 2-4002 EFX 8x3 P AG/ OM 300 712-341 r ev G, en W arr anty #36286- 114 11 July 2011[...]

[...]

[...]

Edition Information ASSEMBLING AND MAI NTAINING ELLIPTICAL FITNES S CROSSTRAINERS: EFX 883 / 833 / 823 P/N 300712 - 341 rev G Copyright © July 2011 Precor Incorporated. All rights reserved. Specifications subject to change without notice. Trademark Note Precor, AMT, and EFX are registered trademarks and Prev a is a trademark of Precor Inco rporate[...]

Important Sa fety Ins tructions Read all instructions in the documentation provided with your exercise equipment, including all assembly guides, user guides, and o wner ’ s manuals, before installation of this device. The display apparatus (hereinafter referred to as the console ) is intended to be shipped with new Precor exercise equipment (here[...]

4 Assem bli ng and Maintaining Ellip tical Fitness Crosstrainers: EF X 883 / 833 / 823  Do not allow children, or people unfamiliar with the operation of this equip ment, on or near it. Do not leave children unsupervised around the equipment.  Make sure all users wear proper exercise clothing and shoes for their workouts and avoid loose or da[...]

Important Safety Instructions 5  Proper Location for Equipment  For all equipment other than tr eadmills: Locate at least 40 inches (1 meter) away from walls or furniture on either si de of the equipment, and 40 inches (1 meter) away from objects behind the equipment.  For treadmills: Locate at least 40 inches (1 meter) away from walls or [...]

6 Assembli ng and Maintaining Ellip tical Fitness Crosstrainers: EFX 883 / 833 / 823  Do not operate the equipment where aerosol (spray) products are being used or wher e oxygen is being administered.  Do not use outdoors.  Do not attempt to service the equipment yourself, except to follow the maintenance inst ructions in this manual.  [...]

Important Safety Instructions 7 Product Recycling and Disposal This equipment must be recycl ed or di scarded accordin g to applicable local and national regulations. Product labels, in accordance with European Directive 2002/96/EC concerning waste electrical and electronic equipment (WEEE), determine the framework for the return and recycling of u[...]

8 Assembli ng and Maintaining Elliptical Fitne ss Crosstrainers: EFX 88 3 / 833 / 823 Federal Communications Commission, Part 15 This equipment has been test ed and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reason able protection against harmful interfere[...]

Important Safety Instructions 9 European Applications CE compliance is claimed to the following directives:  1999/5/EC R&TTE Directive  2006/95/EC LVD Directive  2002/95/EC RoHS D irective Directive compliance has been verified to the following standards:  EN 55022  EN 300 330- 1 V1.5.1  EN 300 330- 2 V1.3.1  EN 301 489 - 3[...]

10 Assembli ng and Maintaining Ellip tical Fitness Crosstrainers: EFX 883 / 833 / 8 23 Radio Frequency Interference (RFI) This Precor exerc ise equipment confor ms to the following national standards defining acceptable limits for radio frequency interference (RFI). Federal Communications Commission, Part 15 This equipment has been test ed and foun[...]

Im portant Safety Instructi ons 11 Electrical Recommen dations: All Equipment Excluding Treadmills Note: This is a recommendation only. NEC (National Electric Code) guidelines or local region electric codes must be followed. For equipment fitted with a P80 console or Personal Viewing System (PVS) screen a sepa rate power connection is required. For[...]

12 Assembli ng and Maintaining Ellip tical Fitness Crosstraine rs: EFX 883 / 833 / 8 23 Obtaining Updat ed Documentation Current documentation for Experience Series consoles and Preva Networked Fitness softwa re is available at http://www .precor.com/pro ductmanua ls . You may want to check in for updated information from time to time as the univer[...]

T able of C ont ents Important Safety Instructions .................................................... 3 Safety Precautions ................................................................................ 3 Educating Users .................................................................................... 6 Hazardous Materials and Proper Disposal[...]

14 Assembling and Maintaining El liptical Fitness Cros strainers: EFX 883 / 83 3 / 823 Self - Powered Features .............................................................. 53 Informati onal Displ ays Prior to Shutdow n .................................. 54 Symptoms of a Low Batter y ............................................................ 54 [...]

Chapter 1 As sembling the EFX WARNING You will nee d the assi stance of tw o other people to asse mble this unit. DO NOT attempt assembl y by yourself . Importan t: The instructions in t he following p rocedures are described f rom the perspective of a p erson standing directly in front of the equ ipment (that is, on the opposite s ide of the contr[...]

16 Assembling and Maintaining El liptical Fitness Cros stra iners: EFX 88 3 / 833 / 823  Begin installation of all fasteners by hand, then partially tighten them. Do not fully tighten fasteners until instructed to d o so. Importan t: When wre nch - tightening the screws, make su re the head of the fas tener is parallel to the produc t surface. I[...]

Assembling the EFX 17 Fasteners Quantity Flat washers ( ⁵₁₆ - inch) 14 Split washers ( ⁵₁₆ - inch) 14 Flat head hex drive screws ( ¹₄ - inch x ³₄ - inch) 4 Phillips- head machine screws (#8 x ³₄ - inch) 3 Buttonhead screws ( ⁵₁₆ – inch x � 1� – inch) 14 Sockethea d cap scre ws (#8 x 1 ¹₂ - [...]

18 Assembling and Maint aining Elliptical Fitness Cro sstra iners: EFX 8 83 / 833 / 8 23 Handlebar b olt wrench 1 Center cross bar cap Outer handrail cap (2) Inner handrail cap (2) Upright support covers (right -h and and left - hand set s)[...]

Assembling the EFX 19 Required Tools  #2 Phillips screwdriver  Rubber mallet  SAE standard he x wrench set  SAE standard soc ket set  Two ⁹₁₆ - inch wrenches (open - end and box- end)  Wire c utter Performing the Assemb ly DANGER Do not attempt to con nect electric al power until all assemb ly procedures are c omplete and[...]

20 Assembling and Maintaining Ellip tical Fitness Crosstra ine rs: EFX 883 / 8 33 / 823 2. Thread the cable through the left upright support. T ape it to the top of the upright support to secure it temporarily. Importan t: Do not stretch, c rimp, or damage the c able. Cables damaged by improper installat ion will not b e covered by the Preco r Limi[...]

Assembling the EFX 21 3. Attach the left upright support to the base frame using four buttonhead screws , four split washers, and four ⁵₁₆ - inch washers. Partially tighten the fasten ers. Figure 4 : Atta ch the uprigh t support to the base frame 4. Repeat steps 2 through 4 to attach the right upright support. 5. Using a right - angle ³?[...]

22 Assembling and Maintaining Ellip tical Fitness Crosstra ine rs: EFX 883 / 8 33 / 823 8. Pull the end of the cable upward through the op ening just behind the lift motor, as shown in the previous illustration. 9. Attach the cable to the appropriate connector inside the base of the EFX, as shown in the following illus tration and table. Importan t[...]

Assembling the EFX 23 11. Replace the central plastic base cover, then attach the four buttonhead screws you removed along with the cover. Tighten th e screws completely. 12. Replace the lift cover that was removed in the first step. Figure 7 : Lift c over replace ment[...]

24 Assembling and Maintaining Ellip tical Fitness Crosst ra iners: EFX 88 3 / 833 / 823 To mount t he center column s upport on the fram e : Note: Check that the base fasteners are loose before installing the fasteners for t he central column support. 1. Have your assistant support the center column support while you align the inside mounting brack[...]

Assembling the EFX 25 3. Check alignments and thread the remaining four center column support scr ews, four ⁵₁₆ - inch washers, and four split washers. Tighten with a ³₁₆ - inch hex key so the assemblies come together, but leave room for adjustments. Figure 9 : Attac hment of ce nter colum n support To tighten the fast eners pr ope[...]

26 Assembling and Maintaining Ellip tical Fitness Crosst ra iners: EFX 88 3 / 833 / 823 2. Fully tighten the fasteners on the back of each upright support. Figure 11 : Tighten t he back faste ners on the upright su pports 3. Fully tighten the fasteners on the lower sides of eac h upright supp ort. Figure 12 : Tighte n the front fasteners o n the up[...]

Assembling the EFX 27 To attach the handleb ars: Importan t: Attach one handlebar at a time. 1. Use a ³₁₆ - inch hex wrench to loosen the two screws in the handlebar clamp. Refer to the following illustration for the location of these faste ners. Figure 14 : Clamp sc rew locatio n, EFX handl ebar brack et 2. Connect the heart rate cable fro[...]

28 Assembling and Maintaining Ellip tical Fitness Crosstra in ers: EFX 883 / 8 33 / 823 3. Insert the right handlebar into the handlebar clamp until the foam grip touches the side of th e handlebar clamp. 4. Apply pressu re to the h andlebar and rotate it ba ck and forth to ease it into the handlebar c lamp. 5. Slide the inner handlebar cap onto th[...]

Assembling the EFX 29 3. Insert the center crossba r cap for each handlebar and press firmly into place. Figure 17 : Cente r crossbar c ap attachmen t Note: When secure, the center crossbar caps hold th e lift cover in place. 4. Attach the outer handlebar ca ps. Figure 18 : Oute r handrail ca ps attachme nt[...]

30 Assembling and Maintaining Ellip tical Fitness Crosstra iners: EFX 883 / 83 3 / 823 To attach the water b ottle h older: 1. Position the water bottle holder as shown and attach it to the right stationary handlebar. Figure 19 : Water bottle atta chment 2. Secure the holder using three Phillips - head screws. To attach the uprig ht supp ort covers[...]

Assembling the EFX 31 5. Slide the covers down and snap them into the base mount. Note: Be sure to align the covers so th at the lip of each cover fits inside the edg e of the base mount and the hook on the base mount fits into the corr esponding slot on the cover. When you have snapped the covers into place, the surfaces of the covers and t he bas[...]

32 Assembling and Maintaining Ellip tical Fitness Crosstra iners: EFX 883 / 83 3 / 823 Breaking in the Equip ment Precor equipment does not require an actual break - in period. However, moving components such as belts, gears, and bearings can settle while the equipment is being stored or shipped. This can cause th e equipment to operate with a smal[...]

Chapter 2 Installing the Console To make installation easier, all Precor Experience Series consoles use the same mounting ha rdware and connector locations wheneve r possible. The installat ion sequence for any of them is as follows:  Threading the cable assembly  Connecting cables  Completing the installation (tightening the mounting scre[...]

34 Assembling and Maintaining Ellip tical Fitness Crosstrainers: EFX 883 / 833 / 823 Importan t: Before you begin th e following procedu re, remove the rear cover fr om the control con sole. To remov e the cover, use yo ur fingernails to pry the lower edg e loose, then swin g the cover up and out as sho wn in the follow ing illustration . Figure 22[...]

Installing the Cons ole 35 3. Rest the console on the console mount so that the notch on the bottom of the console ’ s back plate rests on the rectangular hook at the bott om of the console mount, as shown in the following figure. Figure 23 : Conso le position ing on base u nit 4. Tilt the console forward until it stops. Use one hand to steady th[...]

36 Assembling and Maintaining Ellip tical Fitness Crosstrainers: EFX 883 / 833 / 8 23 Connecting Cables (P80) After the console has been seated, separate the individual cables out of the end of the cable assembly and attach them to the appropriate circuit connectors inside the con sole. Refer to the following diagram and table to identify the cable[...]

Installing the Console 37 Table 1. P80 inte rnal cable connections Cable Connector Ty pe Circuit Connector Location Ethernet (LAN) Eight - contac t modular, on round black cable TV in F- type coax ial Power with splitter cable Two - contact plug, polarized and latche d Data from base unit Eight - contac t modular, on flat gray cable Heart rate sens[...]

38 Assembling and Maintaining Ellip tical Fitness Crosstrainers: EFX 883 / 833 / 823 Connecting the Telev ision Cable The console ’ s television tuner is mounted insid e the console ’ s back plate. The tuner includes a short cable adapter that allows the television cable to be connected outside the back plate. To connec t the tel evision c able[...]

Installing the Console 39 Connecting the Ethernet and Base Unit Data Cables Both the Ethernet and base unit data c ables pass through the cutaway opening at the upper right corner of the back plate and connect to nearby modula r jacks in the console. Because of this, it is important to exercise caution when connecting the cables. The black Ethernet[...]

40 Assembling and Maintaining Ellip tical Fitness Crosstrainers: EF X 883 / 833 / 823 Connecting the Heart Rate Sensor Cable The heart rate sensor ca ble passes through the cutaway opening at the upper left corner of the back plate, then down t o the small circuit board at the lower left of the console. The following illust ration shows how the cab[...]

Installing the Console 41 Completing the Console Insta llation (P80) Importan t: To allow e nough room to atta ch the console ’ s back cover, you must lo osen the bracket h olding the up per ends of the handlebars in place. If you do not loosen the b racket, the co ver may break. Using a ³₁₆ - inch hex key, loosen the two socket head cap [...]

42 Assembling and Maintaining Ellip tical Fitness Crosstrainers: EF X 883 / 833 / 823 Threading the Cable Assembly (P30 and P20) Earlier in the installation, you threaded the necessary cables through the frame of the base unit and out t he passthrough opening in the console mount. As y ou line up the back plate on the console with the console mount[...]

Installing the Console 43 3. Rest the console on the console m ount so that the notch on the bottom of the console ’ s back plate rests on the rectangular hook at the bott om of the console mount, as shown in the following figure. Figure 30 : Console pos itioning o n base unit 4. Tilt the console forward until it stops. Use one hand to steady the[...]

44 Assembling and Maintaining Ellip tical Fitness Crosstraine rs: EFX 883 / 833 / 8 23 Connecting Cables (P30) After the console has been seated, separate the individual cables out of the end of the cable assembly and attach them to the appropriate circuit connectors inside the con sole. Refer to th e following diagram and table to identify the ca [...]

Installing the Console 45 Table 2. P30 i nternal cabl e c onnectio ns Cable Connector Ty pe Circuit C onnector Location Safety key (treadmills only) Six- contact strip, keyed Auto Stop sensor (treadmills only) Four - contact s trip, keyed Data from base unit Eight - contact modular, on flat gray cable Heart rate sensors Four - contact s trip, keyed[...]

46 Assembling and Maintaining Ellip tical Fitness Crosstraine rs: EFX 883 / 833 / 8 23 Connecting Cables (P20) After the console has been seated, separate the individual cables out of the end of the cable assembly and attach them to the appropriate circuit connectors inside the con sole. Refer to the fo llowing diagram and table to identify the cab[...]

Installing the Console 47 Completing the Conso le Installa tion (P30 and P20) Before you complete the final installation steps, double -check the connections you have made. Make sure that all cables are fully and securely connected, and that any unneeded cables are tied back properly. To comple te the ins tallation: 1. Feed extra cable back into th[...]

48 Assembling and Maintaining Ellip tical Fitness Crosstrainers: EFX 883 / 833 / 823 Verifying That the He art Rate Display Is Operational To verify that the h ear t rate display is operational: 1. Begin exercising on the equipment. 2. Grasp both touch- sensitive handlebars . Note: The heart rate is read within ten seconds. During that time, the he[...]

Chapter 3 Maint enanc e To keep the equipment functioning properly, perform the minor maintenance tasks in this section at the intervals shown on the maintenance checklist. Failure to maintain the equipment as described in this section could void the Precor Limited Warranty. DANGER To reduce the risk of elec trical shock, alw ays disconnect the equ[...]

50 Assembling and Maintaining Ellip tical Fitness Crosstrainers: EFX 883 / 833 / 823 A lternatively, you can clean the equipment with Athletix fitness equipment cleaning wipes (for more information, visit www.athl etixproduc ts.com ) CAUTION: Re ad and follow the ma nufacturer ’ s instructio ns, particularl y dilution instructions , before u sing[...]

Maintenance 51 Weekly Maintena nce Perform the following maintenance tasks every week: 1. Disconnect the external power supply. 2. Clean the ramps and wheels with water or an approved cleaner. 3. Inspect the power cord to verify that it is not pinched under the equipment or between any two moving parts. 4. Clean the floor under the equipment using [...]

52 Assembling and Maintaining Ellip tical Fitness Crosstrainers: EFX 883 / 833 / 823 5. Check the belt tension of the step - up and drive belts. 6. Clean and lubricate the lift motor screw with an approved grease such as S uperLube® with Teflon® or Mobil 1® synthetic grease (adjustable - ramp models only). 7. Check all fasteners for proper tight[...]

Chapter 4 Self- Po w er ed F eatur es Important : T his chapter o f the manual describ es Precor fitness equipme nt that ca n operate without be ing conne cted to AC power. This in cludes units equipp ed with P30 or P2 0 consoles. However, P80 co nsoles must be co nnected to AC pow er through their power s upplies to operate. Fo r this reason , thi[...]

54 A ssem bling and Maintaining Ellip tical Fitness Crosstrainers: EFX 883 / 833 / 8 23 Informationa l Displays Prior t o Shutdown The equipment saves its battery charge by moving into a shutdown mode. If the us er does not maintain the minimum rate of motion, a 30- second shutdown proce ss begin s. In this mode, the console displa ys a countdown i[...]

Self- Powered Features 55 Using the Optional Po wer Adapter After connecting t he power adapter to the equipment, plug the opposite end into the appropriate power source (120 V or 240 V). CAUTION: W hen the opti onal power adapter is in use, m ake sure that the po wer supply cord does no t create a s afety haz ard. Keep it out of t he way of tra ff[...]

56 A ssembling and Maintaining Ellip tical Fitness Crosstraine rs: EFX 883 / 833 / 8 23 Replacing the Battery The equipment ’ s battery is built to last for a long time. However, if you feel that the battery may need replacing, check with an authoriz ed service technician. Refer to Obtaining Servic e . CAUTION: Th e battery s tored insi de the eq[...]

Chapter 5 C ommer c ial Car dio v ascular E quipment Lim it ed W arr a nty PLEASE READ THESE W ARRANTY TERMS AND CONDITIO NS CAREFULLY B EFORE USING YOUR PRE COR INCORPORATE D PRODUCT. BY USING TH E EQUIPMENT, Y OU ARE CONSENTING TO BE BO UND BY THE FOLL OWING WARRANTY TERMS AND CONDITIONS . Limited Warranty. Precor Incorp orated war rants all new [...]

58 Assembling and Maintaining Ellip tical Fitness Crosstrainers: EFX 883 / 833 / 8 23 Options / Accesso ries Many options or acc essories have components t hat are connected interna lly or mounted inside the electronic console. The following guideli nes determine the warranty for these components. If the inter nal components are insta lled by the f[...]

Commercial Cardiovascular Equip ment Limited Warr anty 59 This Limited Warrant y shall not ap ply to: 1. Software ver sion upgrad es. 2. Software defe cts that do n ot materially an d negative ly affect the normal perf ormance of the product under nor mal conditions of use. 3. Consumable goods or c osmetic items of the product, the ext erior of whi[...]

60 Assembling and Maintaining Ellip tical Fitness Crosstrainers: EFX 883 / 833 / 823 EXCLUSION OF CONSEQUENTIAL AND INCIDENTAL DAMAGES. PRECOR AND/OR ITS SUPPLIERS SH ALL HAVE NO OBLIGATION OR LIABI LITY, WHETHER ARI SING IN CON TRACT (INCL UDIN G WARRANTY), TORT (INCL UDING ACTIVE, PASS IVE, OR IMPU TED NEGLIGE NCE AND S TRICT LIABIL ITY), OR OTHE[...]

[...]

As sembling and Maintaining Elliptical Fitnes s Cr oss tr ainers ™ EFX ® 883 • EFX ® 833 • EFX ® 823 Prec or Incorporated 20031 142nd A venue NE P .O . Box 720 2 W oodinville, W A USA 9807 2-4002 EFX 8x3 P AG/ OM 300 712-341 r ev G, en W arr anty #36286- 114 11 July 2011[...]