Precor UBK 800 инструкция обслуживания

As sembling and Maintaining UBK 800-Series Upright Ex er cise Bik es Prec or Incorporated 20031 142nd A venue NE P .O . Box 7202 W oodinville, W A USA 98072 -4002 UBK 800-Series P AG/ OM 300715- 201 rev C W arranty #36286- 114 14 F ebruary 2011[...]

[...]

[...]

Edition Informa tion ASSEM BLIN G AND M AINTAINING UBK 8 00 - SERIES UPRIG HT EX ERCISE BIKE S P/N 30 0715 - 20 1 rev C Copyrig ht © Feb ruary 2 011 P recor Inco rporat ed. All ri ghts reserved. Specifications subject to change without not ice. Trademark Not e Precor, AMT, and EFX are registered trademarks and Preva is a trademark of Precor Incorp[...]

Important Sa fe ty Instructions Read the following precaut ions thoroughly before you begin assembly, and save them afterward for future reference. Safety Precautions Always follow basic safety precautions when using this equipment to reduce the chance of injury, fire, or damage. Other sections in this man ual provide more details of safety feature[...]

4 Assembling and Maintain ing UBK 800 - Series Upright Exercise Bikes  Use the power adapter provided with the equipment. Plug the power adapte r into an appropri ate, grou nded power outlet as ma rked on the equipmen t.  Care should be taken whe n mounting or dismounting the equipmen t.  Read, understand, and test the emergency stop proce[...]

Important Safe ty Instructions 5  If you plan to move t he equipment, obtain help and u se proper lifting techniques. R efer to the "Moving the Equipment" section of the assembly and maintenanc e guide.  Use the equipment only for its intended purpose as described in this manual. D o not use accessory attachments th at are not recom[...]

6 Assembling and Maintain ing UBK 800 - Seri es Upright Exercise Bikes Hazardous Mat erials and Pr op er Dispo sal The bat teries wit hin self - power ed equipment contain materials that are considered hazar dous to the environment . Federal law requires proper disposal of these batteries. If you plan to dispose of y our equipment, contact Pre cor [...]

Important Safe ty Instructions 7 Radio F requenc y Int erferenc e (RF I) The RFID module conforms to the following national standards defining acceptable limit s for radio frequency interference (RFI). Federal Communications Commission, Part 15 This equipment has been t ested and found to comply wit h the limits for a Cl ass A digital device, pur s[...]

8 Assembling and Mainta ining UBK 800 - Series Upright Exercise Bikes European Applications CE compliance is claimed t o the following directives:  1999/ 5/EC R&TTE Dir ective  2006/9 5/EC LVD Dir ective  2002/95/EC RoHS Directive Directive c ompliance has been verified to the fol lowing standard s:  EN 55022  EN 300 330 - 1 V1.5[...]

Important Safety Instructions 9 Radio F requenc y Int erferenc e (RF I) This Precor exercise equip ment conforms to the follo wing national standards defining acceptable limits for radio freque ncy interference (RFI). Federal Communications Commission, Part 15 This equipment has been t ested and found to comply wit h the limits for a Cl ass A digit[...]

10 Assembling and Maintainin g UBK 800 - Seri es Upright Exercise Bikes Electrical Recom mendations: All Equipment Excluding Trea dmills Note : This is a recommendation only. NEC (National Electr ic Code) guidelines or local r egion electric codes must be followed. For equipment fitted wit h a P80 console or Personal Viewi ng System (PVS) screen a [...]

T able of Cont ents Import ant Safety In structi ons ................................................... 3 Safety Pre caution s ................................................................................. 3 Educating Users .................................................................................... 5 Hazardous Mater ials and Proper Dis[...]

12 Assembling and Maintaining UBK 800 - Seri es Upright Exercise Bikes Maintena nce ............................................................................ 35 Daily Cleaning ...................................................................................... 35 Da il y I nsp ec tion ...........................................................[...]

Chapter 1 Assembling the Ex er cise Bik e Import ant: The instructi ons in the following procedures are described from the perspecti ve of a person standing directly in front of the equip ment (that is, o n the oppos ite side of the control cons ole from a person usi ng the equ ipment). These descriptions may not match the n ames of certain parts i[...]

14 Assembling and Maintaining UBK 800 - Seri es Upright Exercise Bikes Unpackin g the Equi pmen t The shipping container for Precis ion Series exercise bikes consists of the f ollowing items:  Wooden pallet  Cardboard base  Cardboard cover WARNING Do not attempt to move the equi pmen t o ff of the pallet by yoursel f. Have at least on e ot[...]

Assembling the Exer cise Bike 15 Hardware Kit ( not to scale) Before you begin the assembly, verify that the following hardw are items are pack ed with the equ ipment. Fasteners Q uantity ⁵₁₆ - inch x ³₄ - inch sockethead s crew 4 ¹₄ - inch x ⁵₈ - inc h flathe ad ma chi ne scr ew 4 #8 x ⁵₈ - inc h self - tapp ing [...]

16 Assembling and Maintaining UBK 800 - Seri es Upright Exercise Bikes Installing the Upright Support and Cables DANGER Do not attempt to connect electrical power until all assembly procedures are co mplete and the c onsole is properly installed. Before you begin this procedure, retrieve the cables for the console that you pla n to install on this [...]

Assembling the Exer cise Bike 17 4. Remove the f our #10 x 1 - inch self - tapping screws holding the left side cover in place, then pull the cover away f rom the body a ssembly. Guide the cover around the pedal crank, then remove it and set it asi de. Figure 4 : Side cover remova l 5. Remove the tape holding the base unit data cable in place insid[...]

18 Assembling and Maintaining UBK 800 - Seri es Upright Exercise Bikes Note: If the support is positioned correctly, it rests on a metal tab in the upright su pport channel. Figure 5 : Upright s upport insertion Impo rtan t : In the fol lowing s tep, be extr emely careful not to trap or pinc h any of the cables between the mo unting scr ews and the[...]

Assembling the Exer cise Bike 19 Installing the Bottle Holder The bottle holder attaches to a plastic support that ha s been mounted on the upright support at the f actory. To instal l the bottle hold er : 1. Position the bottle holder on its support so that the t hree tabs on the bottle holder fi t into the three rectangular holes in the support. [...]

20 Assembling and Main taining UBK 800 - Series Upright Exercis e Bikes Installing the H andlebars After the upright support a nd the bottle holder are se curely in place, install the handlebar assembly and route the heart r ate sensor cable through the s upport. To instal l the handleba rs: 1. Position the handlebars ov er the brackets near the to[...]

Assembling the Exer cise Bike 21 Making Sure th e Unit Is Stable Make sure the unit is level before allowing anyone to use it. CAUTION: To eliminate movement, make su re the adjustable fee t are in con tact with th e floor. To level the unit: 1. Gently rock the unit. If there is any movement, ask yo ur assistant to ti p the unit to one side while y[...]

22 Assembling an d Maintaining UB K 800 - Series Upright Exe rcise Bikes[...]

Chapter 2 Installing the Console To make installation easier, all Precor Experience Series consoles use the same mo unting hardware and connect or locations w henever possible. The installation sequence for any of them is as fo llows:  Threading the cable assembly  Connecting cables  Completing the installation (tighteni ng the mounting sc[...]

24 Assembling and Mainta ining UBK 800 - Series Up right Exe rcise Bike s Impo rtan t : Before yo u begin the f ollowing pr ocedure, re move the rear cover fr om the con trol console . To remove the cover , use your fingern ails to pry the l ower edge loose, then sw i ng the co ver up and out as sh own in the follow ing illustration . Figure 9 : Re[...]

Installing the Con sole 25 Connecting Cables (P80) After the console has been seated, separate the individual cables out of t he end of the cable as sembly and attach them to the appropriate circuit connect ors inside the console. Refe r to the following diagram and tab le to identify the cables and connectors. Figure 11 : Cable connections, P80 co[...]

26 Assembling an d Maintaining UB K 800 - Seri es Upright Ex ercise Bik es Cable Conne ctor Type Circ uit Conne ctor Location Heart rate s enso rs Four - c onta ct s trip, k eyed Safety key (trea dmil ls only) Six - co ntac t stri p, ke yed CSAFE Eig ht - co ntac t mod ular , on flat gray cable Auto St op se nsor (trea dmil ls only) Four - c onta c[...]

Installing the Con sole 27 The following illustration s hows how the cable is posi tioned once it is inst alled. Figure 12 : Connecting t he television cable Connecting the Ethernet and Base Unit Data Cables Both the Ethernet and base unit data cables pass t hrough the cutaway opening at the up per right corner of the b ack plate and connect to nea[...]

28 Assembling and Mainta ining UBK 800 - Series Up right Exe rcise Bike s Connecting the Heart Rate Sensor Cable The heart rate sensor cable passe s through the cutaway opening at the upper left corner of the back plate, the n down to the small cir cuit board at the lower left of the console. The following illustration shows how the ca ble should l[...]

Installing the Con sole 29 Completing the Console Installati on (P80) Before you complete the f inal installation steps, doub le - check the connections you have made. Make sure that a ll cables are fully and securely connected, and that any unneeded cables are tied b ack properly. To compl ete the insta llation: 1. Feed extra cable back into the n[...]

30 Assembling and Mainta ining UBK 800 - Series Up right Exe rcise Bike s To th read th e cable asse mbly : 1. Make sure that as much of each ca ble as possible passes through the opening in the middle of the console mo unt on the base unit. 2. Position the console over t he console mount. 3. Rest the console on the co nsole mount so that the no tc[...]

Installing the Con sole 31 Connecting Cables (P30) After the console has been seated, separate the individual cables out of the end of th e cable assembly and atta ch them to the appropriate circuit connect ors inside the consol e. Refer to the following diagram and tab le to identify the cables and connectors. Figure 17 : Cable connections, P30 co[...]

32 Assembling and Maintainin g UBK 800 - Se ries Up right Exercis e Bike s Connectin g Cabl es (P20) After the console has been seated, separate the individual cables out of the end of th e cable assembly and atta ch them to the appropriate circuit connect ors inside the console. Refe r to the following diagram and tab le to identify the cables and[...]

Installing the Con sole 33 Completing the Console Installati on (P30 and P20) Before you complete the f inal installation steps, doub le - check the connections you have made. Make sure that a ll cables are fully and securely connected, and that any unneeded cables are tied back properly. To compl ete the insta llation: 1. Feed extra cable back int[...]

34 Assembling and Maintain ing UBK 800 - S eries Up right Exe rcise Bike s Verifying Th at the Heart Rate Display Is Operational To verify that the hea rt rate disp lay is operationa l: 1. Begin exercising on the equipment. 2. Grasp both touch - sensitive handlebars. Note: The heart rate is read within ten seconds. D uring that time, the hea rt on [...]

Chapter 3 Maintenanc e To keep the equipment f unctioning properly, perform the minor maintenance tasks in t his section at the int ervals shown on the maintenanc e checklist. Failure to main tain the equipment as described in t his section could void the Precor Limited War ranty. DANGER To reduce the risk of electrical shock, a lways disconnect th[...]

36 Assembling and Maintain ing UBK 800 - Seri es Upright Exercise Bikes Alternatively, you can clea n the equipment with Athl etix fitness equipment cleaning wipes (for more information, v isit www.a thletixpr oducts.com ) CAUTION Vacuum the floor underneath t he equipment frequently to prevent the accumulation of dust and dirt that can in terfere [...]

Maintenance 37 Quarterly Main tenance Precor recommends that you clean and inspect the equipment more thoroughly once every t hree months. To perform quarter ly maintenance: 1. Remove the cover panels. 2. Vacuum out any debris, being careful not to b ring the vacuum cleaner nozzle too close to any circuit bo ard (unless your vacuum cleaner is prote[...]

38 Assembling and Mainta ining UBK 800 - Series Upright Exercise Bikes Moving the Equipment The equipment is very heavy. If you plan to move it to a new location, obtain the help of an adu lt assistant and use prope r lifting techniques. If the eq uipment includes roller wh eels on one end, use the wheels to reduce the load on you rself and your as[...]

Chapter 4 Self - Po w er ed Featur es Impo rtan t : This chapter of the m anual describes Precor fitness equipment that can oper ate without being connec ted to AC power. This includes units equippe d with P4 0 or P20 c onsoles. However, P80 consoles mu st be connected t o AC pow er through their power supplies to oper ate. For this reason, this ch[...]

40 Assembling and Mainta ining UBK 800 - Series Upright Exercise Bi kes Informational Displays Prior to Shutdown The equipment saves its battery charge by moving into a shutdown mode. If the use r does not maintain the mi nimum rate of motion, a 30 - secon d shutdow n process begins. In this mode, the conso le displays a countdown indicat or and ig[...]

Self - Powered Features 41 Using the Optio nal Power Adapter After connecting the powe r adapter to the equipment , plug the opposite end into the a ppropriate power source (1 20 V o r 240 V). CAUTION: When the o ptional power adap ter is in use, m ake sure that the po wer supply cord does n ot create a s afety h azard. Kee p it out of th e way o f[...]

42 Assembling and Maintaining UBK 800 - Seri es Upright Exercise Bikes Replacing the Battery The equipment ’ s batter y is built to last for a long time. However, if you feel that the battery may need replaci ng, check with an authorized s ervice technician. Refer to Obtaining Service . CAUTION: Th e batte ry stor ed inside th e equip ment con ta[...]

Chapter 5 Commer cial C ar di o v ascular E quipment Limit ed W arr anty PLEASE READ THESE WARRANTY TERMS AND CONDITIONS CAREFULLY BEFORE USING YOUR PRECOR INCORPORATED PROD UCT. BY USING THE EQUIPMENT , YOU ARE CONSENTING TO BE BOUND B Y THE FOLLOWING WARRANTY TERMS AND CONDITIONS . Limite d Warr anty . Precor I ncorp orated w arra nts all new Pre[...]

44 Assembling and Maintain ing UBK 800 - Seri es U pright Exercise Bikes Options / Accesso ries Many op tions or acces sories have compone nts that are co nnec ted inter nally o r mou nted inside the elec tronic co nsole . T he follow ing guide line s dete rmine the warra nty for t hes e componen ts. If the inte rnal c omp onents a re insta lled b [...]

Commercial Cardiovascular Equipment Limited W arranty 45 This Limi ted Warranty sh all not app ly to : 1. So ftware versi on upgr ades. 2. Softwa re def ects that do not m ateria lly and negat ively af fect t he norma l perfo rmanc e of the pr oduct und er norm al c onditi ons of us e. 3. Consuma ble goods or cos meti c item s of the product , the [...]

46 Assembling and Maintain ing UBK 800 - Seri es U pright Exercise Bikes EXCLUSION OF CONSEQUENTIAL AND INCIDENTAL DAMAGES. PRECOR AND/OR ITS S UPPLIERS SHALL HAVE NO OBLIGATION OR LIABILI TY, WHETHER ARISING IN CO NTRACT (INCL UDING WARR ANTY), TO RT (INCLUD ING ACTIVE, PASS IVE, OR IMPUTED NEGLIGENCE AND STRICT L IABILITY), OR OTHERWISE, FOR DAMA[...]

Commercial Cardiovascular Equipment Limited W arranty 47[...]

48 Assembling and Maintain ing UBK 800 - Series U pright Exercise Bikes[...]

[...]

As sembling and Maintaining UBK 800-Series Upright Ex er cise Bik es Prec or Incorporated 20031 142nd A venue NE P .O . Box 7202 W oodinville, W A USA 98072 -4002 UBK 800-Series P AG/ OM 300715- 201 rev C W arranty #36286- 114 14 F ebruary 2011[...]