Premier Mounts PSD-BWL инструкция обслуживания

INSTALLATION MANUAL PSD-BW/PSD-BWL Nesting Cart Series NORTH AMERICA EUROPE AUSTRALIA,NEW ZEALAND, OCEANIA (Distributor) 3130 East Miraloma Avenue Anaheim, CA 92806 USA USA and Canada – Phone: 800-368-9700 Fax: 800-832-4888 Swallow House, Shilton Industrial Estate, Shilton, Coventry, England CV79JY Phone: +44 (0) 2476 614700 Fax: +44 (0) 2476 614[...]

PSD-BW/L Installation Instructions Page - 2 - Table of Contents WARRANTY ...................................................................................................................... .............................. - 2 - CONTACT PREM IER MOUNTS .................................................................................................[...]

PSD-BW/L Page - 3 - Installation Instructions Warning Statements WARNING: PREMIER MOUNTS DOES NOT WARRANT A GAINST DAMAGE CAUSED BY THE USE OF ANY PREMIER MOUNTS PRODUC T FOR PURPOSES OTHE R THAN THOS E FOR WHICH IT WAS DESIGNED OR DAMAGE CAUS ED BY UNAUTHORIZED ATTACHMENTS OR MODIFICATIONS, AND IS NOT RESPONSIBLE FOR ANY DAMAGES, CLAIMS, DEMANDS, [...]

PSD-BW/L Installation Instructions Page - 4 - Parts List Congratulations on purchasing the PSD-BW/PSD-BW L Ne sting Cart. The PSD-BW/PSD-BWL Nesting Cart is shipped with all proper installation ha rdware and components. Please verify that none of these parts are m issing and/or damaged before assembly. If there are parts m issing and/or dama ged, p[...]

PSD-BW/L Page - 5 - Installation Instructions BW Base Castor Installation (Fi gure 1) Unpack the PSD-BW/L Nesting Cart and review any WA RNING statem ents that apply to the installation. Select the desired location fo r the PSD-BW /L Nesting Cart. Figure 1 1. Place the BW/L on a flat surface. NOTE : Make sure the locking castors (Qty 2) are a ttach[...]

PSD-BW/L Installation Instructions Page - 6 - PSD-SPA Installation (Figure 3) NOTE : Use of the PSD-SPA will de pend on the mount that is us ed. All PSM/CTM Series mounts require using the PSD-S PA. The Revolut ion Series, USA and UFA Mounts, h owever, do not require the use o f the PSD-SPA . 1. Slide the PSD-SPA over and down th e su pport tubes. [...]

PSD-BW/L Page 7 Installation Instructions Optional Mounting Configuration s CTM-Series Revolution Series USA/UFA Series[...]

PSD-BW/L Installation Instructions Page 8 Technical Specifications All measurements are in i nches (mm). Notes PSD-BW PSD-BWL[...]

Installation Instructions Installation Instructions Installation Instructions Installation Instructions Rotary T ilt Mount Model: R TM-L NOR TH AMERICA 3130 East Miraloma A venue Anaheim, CA 92806 USA USA and Canada - Phone: 800-368-9700 Fax: 800-832-4888 EUROPE Swallow House, Shilton Industrial Estate, Shilton, Coventry , England CV79JY Phone: +44[...]

R TM-L T ABLE OF CONTENTS W arranty 2 Contact Premier Mounts 2 W arning S tatements 3 Parts List 4 Installation T ools 4 Thread Depth Indicator 7 Mount Installation 8 Universal Mounting Bracket Installation 9 Display Orientation 11 Securing the Display 11 T ilt Positioning 12 Optional Configurations 12 T echnical Specifications 12 Addendum 13 Page [...]

R TM-L Installation Instructions Page 3 W arning S tatements W ARNING : PREMIER MOUNTS DOES NOT W ARRANT AGAINST DAMAGE CAUSED BY THE USE OF ANY PREMIER MOUNTS PRODUCT FOR PURPOSES OTHER THAN THOSE FOR WHICH IT W AS DESIGNED OR DAMAGE CAUSED BY UNAUTHORIZED A TT ACHMENTS OR MODIFICA TIONS, AND IS NOT RESPONSIBLE FOR ANY DAMAGES, CLAIMS, DEMANDS, SU[...]

R TM-L Page 4 Installation Instructions Parts List NOTE : This mount is shipped with all installation hardware and components. Make sure that none of these parts are missing and/ or damaged before beginning installation. If there are parts missing and/or damaged, please stop and contact Premier Mounts (800) 368-9700. Installation T ools Phillips He[...]

Installation Instructions Page 5 R TM-L (Qt y 8 ) M6 x 20 (Qty 8) (Qty 4) (Qty 8 ) (Qty 8) (Qty 8) (Qt y 8 ) M6 x 30 M6 x 45 (Qty 8 ) M8 x 25 M8 x 20 (Qty 8 ) (Qty 8) (Qty 8) (Qt y 8 ) (Qty 8) M8 x 35 M8 x 30 (Qty 8) M8 x 70 M8 x 45 (Qty 8) M4 x 16 M4 x 25 M5 x 12 M5 x 20 M5 x 25 M5 x 16 M5 x 50 M6 x 16 (Qty 8) (Qty 8 ) Parts List (Cont.)[...]

Page 6 Installation Instructions R TM-L Parts List (Cont.) Nylon spacers and flat washers' actual size NOTE : The nylon spacers may be stacked to achieve proper spacing. 1/2 " Nyl on spacers (lar ge) Ny lo n sl eev es (Qty 8) (Qty 12) (Qty 8) (Qty 8) (Qty 8) (Qty 8) 1/4 " Nyl on spacers (Small) (Qty 8) 1/4 " Nyl on spacers 5/16 [...]

R TM-L Installation Instructions Page 7 Thr ead Depth Indicator 1. Insert the thread depth indicator (supplied) through the thread inserts found on the back of the flat panel to make sure the inserts measure the same full depth and mark it (Figure 1). 2. Locate the correct diameter screw for the thread insert. Compare your marking to the screws (su[...]

R TM-L Page 8 Installation Instructions NOTE : The installation instructions that are contained in this manual refer only to the R TM-L. The installation instructions for the various bases that are used with the R TM-L will be included with those products. NOTE : Prior to installing the R TM-L, the mounting configuration must already be assembled ([...]

R TM-L Installation Instructions Page 9 Universal Mounting Bracket Assembly 1. Place the universal bracket bar and the universal brackets on a flat surface. 2. Slide the universal brackets onto the universal bracket bar (as shown below) with the set screws facing up. At this time, do not tighten the set screws that are located on the universal brac[...]

R TM-L Page 10 Installation Instructions 3. Lower the universal bracket bar and display into the cradle (as to the left). NOTE : The circular portion of the universal bracket bar must rest inside the nylon sleeve. If seated improperly , the operation of the R TM-L will be hindered and the nylon sleeve will become damaged. 4. Insert an M6 knurl knob[...]

R TM-L Installation Instructions Page 1 1 Display Orientation The R TM-L will allow the user to adjust the display a full 360°. W ARNING : BEFORE ROT A TING THE R TM-L, MAKE SURE THA T THE M6 KNURL KNOB IS SECUREL Y F ASTENED TO THE R TM-L. ALSO, PLEASE MAKE SURE YOU ALLOW ENOUGH CABLE AND WIRE CLEARANCE FOR FULL ROT A TION. 1. T o adjust the R TM[...]

R TM-L Page 12 Installation Instructions Optional Configurations T echnical Specifications All measurements are in inches (mm). PSD-TS PSD-BW PSD-EB[...]

RTM-L Adde ndum Page – 13 – Installation Instructions RTM-L AD DEN DUM: The RTM- L is shipped with the hand crank in the st orage position. The hand crank must be remov ed in order for the RTM-L to be adjusted. After the adjustments have been made, return the hand cr ank to the storage posit ion. I f the hand crank is not returned to t he st or[...]

1 2 I N S T A L L A T I O N M A N U A L www. idt .com .au Phone: 1300 666 099 PSD-SHB Black Shelf Step 1 Open the box and remove all components. Step 2 Slide the shelf over the poles, select the desired height and lock the height by tightening t he four (4) Allen head screws using the hex key.[...]