Pressure Systems 9022 инструкция обслуживания

NetScanner™ System Visit us on the web: www. Pressure System s .com Intelligent Pressure Scanner User’s Manual (Models 9016, 902 1, 9022) 13 th Edition September 2007[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com - i - ©This User’s M anual is a copyright p roduct of Pressure S ystems, Inc. , 20 07. Permission is hereby granted to mak e copies and distribute verbatim copies of this manual, provided the copyright notice and this perm ission notic[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com - ii - REVISION REVISION HISTORY PRINT DATE 1 Original - 2nd Edition 4/94 2 3rd Edition (add Model 902x and 9016) 11/97 3 4th Edition 3/98 4 5th Edition 9/99 5 6 th Edition 03/00 6 7 th Edition (delete Optomux references and add multi-poi[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com - iii - Preface This manual de scribes th e NetScanner Syst em In tellige nt Pressur e Scanne r modules (Models 9016, 9021, and 9022). It does not co ver the 9 8RK Scanner Interfa ce Rack, model 9816 Intelligent Pressur e Scanner, nor mod[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com - iv - Our Company Pr essure Syst ems Incorporated, (PS I) develo ps, manufactures, and services level and pr essure measuring instrumen ts where the high est leve l of tr ace able accuracy is required for aerospace, industrial, municipal[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com - v - ATTN: PSI REPAIR DEPARTMENT (7- digit RMA number) Pressure Systems, I nc. 34 Research Drive Hampton, Virginia 23666 PSI will return warranty items prepaid via UPS GROUND. If the customer desires another method of return shipment, PS[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com - vi - Table of Content s Chapter 1 — General Information ....................................... 1-1 1.1 Introduction .................................................... 1-1 1.2 Descrip tion of I nstrumen ts ..........................[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com - vii - Table of Contents (C on t.) 3.1.2 Commands ............................................... 3-2 3.1.2.1 General Command Format ............................. 3-2 3.1.2.2 Command F ield ..................................... 3-3 3.1.2[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com - viii - Table of Contents (C on t.) 3.3 Obsolete Commands ............................................ 3-73 Chapter 4 — Calibration ............................................... 4-1 4.1 Introduction ..................................[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com - i x - Table of Contents (C on t.) 5.1.6 Repla cement of O-R ings ................................... 5-10 5.1.6.1 DH200 Pressure Transducer O-Ring Repla cement ......... 5-11 5.1.6.2 Tubing Plate O-Ring Replacement .....................[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com - x - List of Figures Figure 1.1 NetScanner Syste m Pneumatic Intelligent Pressure Sca nners ........ 1-2 Figure 2.1 9016, 9021 , 9022 Powe r Pin Assig nments ...................... 2-2 Figure 2.3 Ethernet Host Port Connector Pins .......[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 1 - 1 Chapter 1 General Informat ion 1.1 Introduction This User ’s Manua l will: ! Explain the elec trical a nd pneuma ti c pressure connections for the NetScanner ™ Syst em Models 901 6, 9021, a nd 9022 I ntellige nt Pressur e Scanne[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 1 - 2 NOTE: The newest P SI Intellige nt Pre ssure Sca nner is the 9022. Its serial numbers begin with 1000. The 9022 is similar in function to the 902 1 (using external sensors), however, t he 9022 fea tures ci rcula r ( military style c[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 1 - 3 1.2 Descriptio n of Ins truments NetScanner ™ Syst em family of I ntelligent Pressure Scanner modules are fle xible pressure measurin g devic es intend ed for us e in test a nd produc tion envir onments. M odels ar e availa ble wi[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 1 - 4 ! Measurement flexibility — each 9021/9022 module is ca pable of measuring general purpose voltage signals on any channel not populated with a 9400-ty pe transducer. Full-scale rang es of ±50, ±100, ±250 and ±4500 mV are suppo[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 1 - 5 utilize an SAE 5/16 - 24 O-ring boss which supports a variety of other adapter compression fitt ings. They are al so ava ilabl e with a quic k dis conne ct pla te whi ch con tains 0.063 " bulge tubulation. The common differenti[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 1 - 6 This page intentionally left blank[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 2 - 1 Chapter 2 Install ation and Set Up 2.1 Unpacking and Inspection The NetScanner ™ System product f amily has many components whic h may be purc hased either as an entire system , or as individual pieces of equipment. Before assembl[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 2 - 2 WARNING : Excee ding the spe cified stor age or ope rating tempe ratures may re sult in perm anent dam age to the NetScanner ™ System electr onics. WARNI NG: Improper connection of power to the Intelligent Pressure Scanner c an re[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 2 - 3 Figure 2.2 Ethernet Host Port Connec tor Pins 2.3.3 Mounting and Module Dim ensions Detailed mechanical drawings for each module are included in Appendix D. 2.3.4 Network Comm unications Hookup Eve ry NetScanner ™ Syst em Intelli [...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 2 - 4 configured Static I P address ing or D yna mic I P address assignm ent. Dynamic I P address assignment is through the use of RARP or BOOTP protocols. Unless your applica tion requi r es the use of Dynamic IP address assignments, it [...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 2 - 5 NOTE: After closing the TCP/IP connection to the module, the host m ust wait 10 seconds before re-connecting. to assign t o those devices. This application is free of charg e and capable of running as a bac kground program on Window[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 2 - 6 Figure 2.3 Ethernet Network Topology[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 2 - 7 2.3.5 Diagnostic Port Hookup Each NetScanner ™ System module contains a Diagnostic Port that supports diagnostic a nd operational functions. The Diagnostic Port has only a simple RS-232 asy nchronous serial interface. The connecti[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 2 - 8 The following guidelines should be used when insta lling pr essure c onnectio ns to all NetScanner ™ System Inte lligent P ressure Scanner modules. ! Alway s wear sa fety glasse s when wo rking w ith pressu rized line s. ! Ensure [...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 2 - 9 Warning: Failure to provide proper purge supply pressure will result i n migrat ion of mois ture and c ontamina nts into the 9016 mo dule which can r esult in per manent damage to module compone nts. 2.3.6.2 CAL Mode Inputs Th e 901[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 2 - 10 Test pressures applied to the CAL port during the leak check operation must not exceed the full scale pressure of any internal transduce rs. WARNING! Supply air should not exceed 125 psi (875 kPa). Excessive pressure may dam age th[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 2 - 11 Warning: Always ensure that the Model 9021/9022 power is OFF before connect ing or disco nnecting e xternal t ransducer s. Warning: Im proper e lectric al connec tions betwe en the Mo del 9021/90 22 and externa l transduce rs can r[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 2 - 12 Figure 2.4a 9022 Transd ucer Wir ing Figure 2.4 9021 Transd ucer Wir ing Please refer t o Section 5 .12 for m odule disasse mbly inst ructions i f changes to the excitat ion voltage are nee ded. 2.3.7.2 Installation of All Other Tr[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 2 - 13 Figure 2.5 9022 Jumper (JB1) Set For 10 VDC Excit ation 2.3.8 Case Grounding The 9016 a nd 9021/90 22 modules contain a case by pass cap acitor w hich allo ws the modu le case to be mounted on hardware with a small common mode line[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 3 - 1 Chapter 3 Programm ing and O perati on 3.1 Command s & Respo nses 3.1.1 Introdu ction This chapter describ es all commands a host computer program may send to a NetScanner ™ System Intelligent Pressure Scanner module, as well [...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 3 - 2 transmissions in some operating modes (e.g., the hardware-triggered or free-run autonomou s host streams generated by the Conf igur e/C ontr ol Au tono mous Hos t Str eams ( ‘c’ ) command). A “peer” may be directly a dd re s[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 3 - 3 and/or decimal point , as needed). Using brackets ( [ ] ) to show optional elements, and ellipsis ( ...) to show indefinite repetition, a typ ical TCP/I P command m ay be viewe d schema tically as follow s: “c[[[[ p ] p ] p ] p ][[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 3 - 4 The channel data requested will always be returned in order of highest re quested c hannel to lowe st reques ted channe l. channel is affected by the command. The least-significant (rig htmost) bit 0 corresponds to Channel 1, and th[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 3 - 5 3.1.2.5 Form at Fiel d Some commands, that either send data to a module (as command para meters), or cause the host to receive data (via command’s response), have an e xtra format parameter (f digit) appended to (or specified in) [...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 3 - 6 The error response consists of the letter ‘N’ (f or NAK, or negative acknowledge ), followed by a 2- digit hexadecimal error code. The following table lists the error codes that can be returned from a NetScanner ™ System modul[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 3 - 7 3.1.3.2 Interpreting Gain Values (Span Calibration Adjustment) When a module is instructed to execute the comman d Calculate a nd Set Gains ( ‘Z’ ), a datum corresponding to the calculated gain correction term (or coefficient) i[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 3 - 8 3.1.4.1 Startup Initialization Since power supplies may be distributed widely acr oss a network of modules and host computer(s), it is not uncommon for modules (singly or tog ether) and the host to lose power inde p en de nt ly. Thu[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 3 - 9 3.1.4.2 Module Data Acquisition After power- up, all modules wi ll begin to scan all attached transducer channels in channel number order. Scanning will occur at the module’s maximum internal rate (using the pre viou sl y stored n[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 3 - 10 need for exter nal pres sure ge nerator s. All 9016 models have buil t-in pneu matic inpu ts (CAL side input s) and calibration manifolds required for directing the generated pressures to the va rious channe ls of the mod ule(s) b [...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 3 - 11 3.1.4.4 Deliver y of Acquire d Data To Hos t Several commands apply to host delivery of a cquired data, either on demand or autonomou sly . The Read High Preci sion Data ( ‘r’ ) command may be used t o obtain high precision dat[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 3 - 12 3.1.4.6 Other F unctions Some commands may be use d at any time to obtain information about the internal setup and status of a module. The Read Module Status ( ‘q’ ) command is an example. Also, the Set/Do Ope rating Options ( [...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 3 - 13 3.2 Detailed Co mmand Des cription Re ference All commands applicable to the various models of the NetScanner ™ System Intelligent Pressure Scanner modules ar e de scribed on the following pages. They are summarized in the follow[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 3 - 14 POWER UP CLEAR (Comm and ‘A’) Purpose: This command has no internal module affect. I t is used as a simple method to verify proper communications to the NetScanner ™ Syst em module. Comm and “ A ” ‘A’ is the command l[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 3 - 15 RESET (Command ‘B’) Purpose: Instr ucts the module to reset internal operating param ete rs, and to set all internal control variabl es to their default “reset” state (see desc ription below). The current TC P/ IP socket c [...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 3 - 16 This ‘C’ c omma nd (with sub-c omma nds) is avail able only in modules that have upgraded to firmware Version 2.24 or later. NOTE: Avoi d confusing this Calibrate comm and ‘C’ (uppe r case C ) with the Conf igur e/C ontr ol[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 3 - 17 Command ‘C’— Sub-comm and Index 00: Configure & Start Multi-Point Calibrat ion This sub-command has four (4) additional required para meters used to configure and star t t he Multi-Point Calibration function. Comm and “[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 3 - 18 The npts param eter f ixes how many calibration points must be supplied when the Multi-P oint Calibration function’s data colle ction phas e starts later wi th multiple invocations of another sub-c ommand (d escribe d below) . Cu[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 3 - 19 Command ‘C’— Sub-comm and Index 01: Collect Da ta for a Cali bration Point This sub-command has two (2) additional required parameter s. Comm and “ C 01 pnt pppp.pppp ” ‘C’ is the command letter. ‘ 01’ is the sub-[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 3 - 20 It is not necessary to enter the two or more calibration points in strict numerical order (i.e. , 1, 2, ... npts ). Any conve nient entry orde r is allowed, though each point’s actual pressure value must be corre ctly stated (wit[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 3 - 21 Command ‘C’— Sub-comm and Index 02: Calculate & Apply Corre ction Coef ficients This sub-c ommand ha s no additi onal par ameters . Comm and “ C 02 ” ‘C’ is the command letter. ‘ 02’ is the sub-command index ([...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 3 - 22 Example: ! Finish the Multi-Point Calibration function previously started (a s indicated by the previous examples of ‘C’ sub-commands ‘00’ and ‘01’). Calculate new adjustment coeffi cients, and save them in the non-vola[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 3 - 23 Command ‘C’— Sub-comm and Index 03: Abort Multi-Point Calibration This sub-c ommand ha s no additi onal par ameters . Comm and “ C 03 ” ‘C’ is the command letter. ‘ 03’ is the sub-command index ( ii ) for Abort . [...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 3 - 24 READ TRANSDUCER VOLTAGES (Command ‘V’) Purpose: Returns for the specified channel s, the most recently a cquired raw pressu re data, converted to volts directly from the averaged A/D co unts . This simp le engi neerin g- unit c[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 3 - 25 ! Send TCP/IP c omm and to Mo del 9016 module (via its connected socket) that returns ASCII decimal fixed-point voltage data for channels 1, 5, 9, and 13: “ V11110 ” Response contains data for channels 13, 9, 5, and 1 (left to [...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 3 - 26 CALCULATE AND SET GAINS (Command ‘Z’) Purpose: Instr ucts a module t o calcul ate new gain coeffi cients, with either full-scal e pressure (or a specified pressure) applied to the specified channe ls. These new coe fficien ts u[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 3 - 27 NOTE: The c alculate d gain values from the late st ‘Z’ c omma nd will be lost when the module is powered off. To save these gain terms to each transduce r’s non-vo latile m emory , refer t o the Set Opera ting Options (‘w?[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 3 - 28 READ TRANSDUCER A/D COUNTS (Command ‘a’) Purpose: Returns the most recently a cquired raw pressu re data for the spec ified ch annels in averaged signed A /D counts ( in the ra nge -3 2768 to +3 2767). Th is simpl e data bypass[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 3 - 29 Example: ! Send TCP/IP c ommand to 9 016 mo dule (via its connected socket) that returns decimal raw “pressure” A/D counts da ta for channels 1, 5, 9, and 13: “ a11110 ” Response contains data for channels 13, 9, 5, and 1 ([...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 3 - 30 READ HIGH-SPEED DATA (Comm and ‘b’) Purpose: Returns the most recent scanned/averag ed data from all channels of the module as fast as possible. Data is r eturned directly in its intern al (I EEE sing le-pre cision flo at) bina[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 3 - 31 WARNING: If t hese data st reams are defined to occur at high rates, then each data packe t receive d by the host must be p rocesse d and disposed of i n a time ly manner. NetScanner™ System modules are capa ble of gener ating au[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 3 - 32 NOTE: When using hardware trigger inputs to synchronize data stream outputs, th e frequenc y of the tr igger sour ce should be no more than 200Hz even if the requested output is 100Hz or less. NOTE: Avoid confusing this Configure/C[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 3 - 33 Command ‘c’— Sub-comm and Index 00: Configure A Host Delivery Stream This sub-command is used to configure the principal parameters of each of the three po ss ible concurrent host delivery strea ms, one at a time. Followin g [...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 3 - 34 When t he hardware trigger is used to synchronize data output ( sync = 0), it i s assumed that the user would prefer to also sy nchronize i n ternal data acquisition cycle. For this reason, when a stream utilizing hardware trigger [...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 3 - 35 NOTE: With the exception of binary formats 7 and 8, all other formats include a leading space in each datum delivered in each stream packet. The ‘ f ’ parameter identifies the format of each selecte d acquir ed datum i n each s[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 3 - 36 NOTE: The ty pe of data d elive red f or each speci fied chan nel (w hen th e strea ms are started) is EU pressure unless sub-command “05” is also executed to select other types of da ta in each s tream. Example: ! Configure th[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 3 - 37 Command ‘c’— Sub-comm and Index 01: Start Stream(s ) This sub-command is used to start the delivery of any pre viously configur ed ho st stream in a module. If the stream started is of “continu ous” dura tion, then it wil[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 3 - 38 stream is restarted, the r eturned sequence numbers will resume with the next number at the point of the stream’s termination. The sequence numbers will not restart a t one (1) if a scan li st is temporarily stopped and then r es[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 3 - 39 Command ‘c’— Sub-comm and Index 02: Stop Stream(s) This sub-command is used to stop (or temporarily suspend) the delivery of any previously started host stream in a module, one at a t ime or all togethe r, wheth er th e strea[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 3 - 40 Command ‘c’— Sub-comm and Index 03: Clear Strea m(s) This sub-command is used to “undefine” any previously config ured host stream in a module, one at a time, or all tog ether. T he sub-c ommand’s format is : Comm and ?[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 3 - 41 Command ‘c’ — Sub-comm and Index 04: Return Stream Informat ion This sub-command returns current stream config uration in formatio n in its res ponse. I ts format is: Comm and “ c 04 st ” ‘c’ is the command letter ‘[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 3 - 42 Example: ! Return co nfigur ation info rmation f or strea m l “c 04 1” Read response: “1 FFFF 0 20 7 32000 1 7002 200.200.200.1” The above e xample shows all 16 (sixteen) channels (Model 9016). The value FFFF would be 0FFF [...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 3 - 43 Command ‘c’ — Sub-comm and Index 05: Select Data in a Stream This sub-comm and sets o ptions tha t cause a specifie d stream to d eliver specific kinds of information to host. By defa ult, only Pressure EU data a re delivered[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 3 - 44 NOTE: Sele cting too many ot her data g roups will com promise module performance. ** NOTE: This status field (0001) cannot be specified for Models 9016, 9021, or 9022. However it is shown should the capability be add ed to future [...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 3 - 45[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 3 - 46 Example: ! Configu re strea m l to retur n temper ature sta tus field, and all Pr essure E U data “c 05 1 0012” Read response: “A” If or wh en st re am 1 i s s ub se qu en tl y enabled, da ta groups in that stream with the [...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 3 - 47 Command ‘c’ — Sub-comm and Index 06: Select Pr otocol For S tream Deliv ery Comm and “ c 06 st pro [ remport [ ipaddr ]] ” ‘c’ is the command letter. ‘ 06’ is the sub-command index ( ii ) for Select Protocol . ‘[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 3 - 48 remport parameter will affect the way host software must handle multiple modules sending streams. If e very module use s the same port, then a sin gle host socket can be bound to tha t port to re ceive a ll resp onse s fr om all mo[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 3 - 49 CALCULATE AND SET OFFSETS (Command ‘h’) Purpose: Instr ucts a module to calculate new offset coeff icients with zero differential pr essu re (or a specified “generated” pre ssure) applied to the specified channels. These ne[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 3 - 50 NOTE: The c alculate d offset value s from t he latest ‘h’ com mand will be lost when the module is powered off. To save these offset terms to each transducer’s non-volatile memory r efer to the Set Opera ting Options (‘w?[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 3 - 51 READ TEMPERATURE COUNTS (Command ‘m ’) Purpose: Returns the most recently a cquired raw tempe rature data for the s pecifie d channe ls in averag ed A/D counts (in the range -32768 to +32767). This command is similar to command[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 3 - 52 Example: ! Send TCP/IP c ommand to 9 016 module (via its conn ected socket) that returns decimal raw “temperature” A/D c ounts data for channels 1, 5, 9, and 13: “ m11110 ” Response contains data for channels 13, 9, 5, and [...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 3 - 53 READ TEMPERATURE VOLTAGES (Command ‘n’) Purpose: Returns the most recently a cquired raw tempe rature data for the s pecifie d channe ls converted to engineeri ng-unit Volts dire ctly from the a verag ed A/D co unts. I t is sim[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 3 - 54 Example: ! Send TCP/IP command to 9016 module (via its connected socket) that re turns decimal voltage data (of the raw tempera ture signal) for channels 1, 5, 9, and 13: “ n11110 ” Response contains data for channels 13, 9, 5,[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 3 - 55 READ MODULE STATUS (Command ‘q’) Purpose: Returns requested module status information. Comm and “ q ii ” ‘ q ’ is the command letter ‘ ii ’ is the status index field Response “ hhhh ” ‘ hhhh’ is a 4-digit he[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 3 - 56 Bit 6: SRAM Error. 03 reserved 04 reserved 05 Number of A/D Samples To Average , as hex value (e.g., 000A=10 decimal). 10 06 IP Address Resolution Method , as hex state: (default = 0000) 0000 = Use Stat ic IP Addr ess stored in mod[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 3 - 57 11 Thermal Update Scan Interval (in seconds) as decimal (**) integer value. 1B 12 9022 Front-end Calibration Interval 22 3C (9016 only) Temperature Ranges , as a hex value 0000 = range 0 to 60ºC 0006 = range -30 to 60ºC 0007 = ra[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 3 - 58 READ HIGH-PRECISION DATA (Comm and ‘r’) Purpose: Returns the most recently ac quired enginee ring-unit pressure data for the specified channe ls. Each datum returned in the response will be in the spe cifie d high- precision da[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 3 - 59 Example: ! Send TCP/IP command to Model 9016 module (via its con nected socket), that returns decimal pressure data for channe ls 1, 5, 9, and 13 in ASCII f ixed point format: “ r11110 ” Response contains data for channels 13, [...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 3 - 60 READ TRANSDUCER TEMPERATURE (Comm and ‘t’) Purpose: Returns the mos t recently a cquired enginee ring-unit temperature data (in °C) for the specified channels. Each datum returned in the r esponse will be in the specified high[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 3 - 61 Example: ! Send TCP/IP c ommand to 9 016 mo dule (via its connected socket) that returns decimal temperature data for cha nnels 1, 5, 9, and 13: “ t11110 ” Response contains data (in °C) for channels 13, 9, 5, and 1 (left to r[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 3 - 62 READ INTERNAL COEFFICIENTS (Comm and ‘u’) Purpose: Returns one (or more contiguous) reque sted internal coefficient(s) in a specified internal coefficient array , and in the specified response data format. Comm and “ ufaacc[-[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 3 - 63 NOTE: Coefficients used for typical applications are shown in BOLD type. All other coefficients are typically not used outside of advanced diagnostic functions . The coefficients of internal DH200 transducers used in the Model 9016[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual cc Transducer Coefficient Description Datum Type www.PressureSystems.com 3 - 64 24-28 Temperature 6, Pressures 1-5 volt ages FLOAT 29-2D reserved for fut ure use (temperature 7) FLOAT 2E Te mpe rature 1 Te mpe rature O utput vo ltage at 0 psi FLOAT 2F Tem peratu[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 3 - 65 NOTE: The maximum response size is 300 charac ters. If the requested range of co efficients requeste d excee ds this, the module will return an “N07" error response. A special single Other Coef ficients array is selected wit[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 3 - 66 DOWNLOAD INTERNAL COEFFICIENTS (Command ‘v’) Purpose: Downloads one or more internal coefficients to the module. Comm and “ vfaacc[-cc]dddd..dddd ” ‘v’ is the command letter. ‘ f ’ is the format field. ‘ aa ’ is[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 3 - 67 The coefficients of internal DH200 transducers used in the Model 9016 are selected with array indexes aa =01 through 10 (hex). Coefficients of external 9400 transducers used by Mode ls 90 21 and 9022 (digitally c ompensated) are se[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 3 - 68[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 3 - 69 The User Defined Date field ( cc =07) is a 32-bit inte ger. Po ssible use s are to indicate the date of last user zero and/or sp an calib ration or possibly the d ate o f next required calibration. If this optiona l field is used, [...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 3 - 70 “ A ” SET/DO OPERATING OPTIONS/FUNCTIONS (Comm and ‘w’) Purpose: Change a module’ s defa ult operating option settings, or invoke special internal operati ons or fun ctions. Comm and “ wii[dd[ eeee]] ” ‘w’ is the [...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual ii dd Description ‘q’ read index www.PressureSystems.com 3 - 71 0B 00 01 Enable Automatic Shifting of Calibration Valve during Calculate a nd Set Off sets ( ‘h’ ) command (default). (9016 on ly) Disable Automatic Shifting of Calibration Valve in ‘h’ [...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual ii dd Description ‘q’ read index www.PressureSystems.com 3 - 72 15 00 01 02 03 ( for Models 9021 and 9022 only; reserved for 9016) Set Amplif ier Gain to 5000 mV F S Range ( G=1) (d efault) Set Amplifier Gain to 250 mV FS Range (G=20) Set Amplifier Gain to 1[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual ii dd Description ‘q’ read index www.PressureSystems.com 3 - 73 26 00 01 ( for Models 9021 and 902 2 ONLY ) Initialize Generi c Sensor Parameter s with Factory Default Paramete rs on Power- up . Retrieve user-pr ovided pa rameter s out of non -volatile memor[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 3 - 74 The Valve Pos ition indexe s ( ii =12 and ii =0C) (for Model 9016 only ) each have two states (00/01) that when combined provide four ( 4) possibl e states of the C1/C2/C3 /C4 intern al valve s. This “Log ical Rota ry Switch” w[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 3 - 75 NETWORK QUERY (UDP/IP Com mand ‘psi9000’) Purpose: To determine how many (and which) modules are powered-up and operational on the network. Comm and “psi9000" Response “ ipadr, ethadr, sernum, mtype, sfwver, c onnst, i[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 3 - 76 Some special rack-mounted module types (e.g ., 9816) also add rack, cluster, and slot parameters to the re sp onse abov e. These additional parameters are a dded following the ‘ pwrst ’ parameter. This uniform network query res[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 3 - 77 RE-BOOT MODULE (UDP/IP Comm and ‘psireboot’) Purpose: To unconditionally “reboot” a specified module. Comm and “psireboot ethadr” where ethadr is the Ethe rnet add ress of the specified module in the following special h[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 3 - 78 CHANGE M ODULE’S IP ADDRESS RES OLUTION METH OD & RE-BOO T (UDP/IP Comm and ‘psirarp’) Purpose: To change (togg le) the current IP ad dress re solution sta te ( ipaarpst ) of a specified module, a nd then un condition all[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 3 - 79 3.3 Obsolete Comm ands Users of older model 9010, 9015, and 9020 modules will notice that several previously documented commands are missing. Most of these missing commands were “standard” Optomux commands that were never of fu[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 3 - 80 which should be r eplace d as follo ws. The se quence ‘T’, ‘I ’, and ‘U ’ were p ieceme al parts of the (now ob so le te ) c om ma nd ‘M ,’ wh ic h w as it se lf re pl ac ed by Read Scale d Analog Inputs ( ‘ L’ [...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 4 - 1 Chapter 4 Calibr ation 4.1 Introduction Each internal DH200 transducer in a NetScanner ™ System Intelligent Pressure Sca nner (Model 9016) contains non-volatile read/write memory capable of storing the transducer 's full ther[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 4 - 2 NOTE: Perio dic zero and span calibrat ion should be the only calibration required to maintain specified performance throughout the life of the scanner. Each model 9016 Intelligent Pressure Sca nner contains an integral purg e/leak [...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 4 - 3 Figures 4.1 - 4.4 Pneum atic Diag rams of t he Calibra tion Manifold[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 4 - 4 NOTE: When us ing the Calculate a nd Set Off sets comm and (‘h’), only local t erms i n the mod ule’s vola tile ma in mem ory (RAM ) are updat ed. Under normal o peration, it is not recommended to stor e these new coefficients[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 4 - 5 Set Opera ting Options ( ‘w’ ) (option index=0B hex) command. This allows independent control of the calibration valve by the user using other options (see option indexes = 0C and 12 hex) of the same command. 4.2.2 Re-zero Calib[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 4 - 6 NOTE: When using the Calculate a nd Set Gain (‘Z’) comm and, only the local var iables in the mod ule’s vola tile ma in mem ory (RAM ) are cha nged. Refe r to Sect ion 4.6 if it is desired to also store these new gain coeffici[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 4 - 7 4.3.1. Span Cal ibration Valve Co ntrol Before e xecu ting a Span adju stment ( Calculate a nd Set Gains ( ‘Z’ ) command), the Model 9016 modules should have their calibration manifold valve plac ed in the pro per posit ion. For[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 4 - 8 4.3.2. Span Calibration Summ ary Following is a simple, step-by-step proc edure for executing a “full scale” span calibration of a 9016, 9021, or 9022 Intelligent Pressure Scanner. For Models 9021 and 9022, skip the steps that m[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 4 - 9 Following is a simple, step-by-step proc e dure for executing a specified-value span c alibration of a 9016, 9021, or 9022 Intelligent Pressure Scanner. For Models 9021/9022, skip the steps that manipulate valves as denoted by the d[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 4 - 10 NOTE: When using the Configure/Control Multi-Point Cali bration (‘C’) c omma nd, only the local variables in the module’s volatile main mem ory (RAM) are chang ed. Refer to Section 4.6 if it is desired to also store these new[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 4 - 11 be applied between the CAL and CAL REF ports (see Section 4.3.1 for more informat ion on thes e ports). Since the module will not attempt to shift this valve automatically, as it does for Re-zero adjustment, it should be placed in [...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 4 - 12 Ready the module for multi-point calibration by executing the Configure & Start (‘ 00 ’) sub-command of ‘C’. This establishes all the channels to be affected, and determines the total number of calibration points that w[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 4 - 13 NOTE: When using the 90 21/9022 with digitall y compensated PSI Model 9400 transduce rs, the s pan calibration functions (for the 9400 transducers) can serve as a method to cor rect both 9400 and internal 9021/9022 meas ureme nt ac[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 4 - 14 Figure 4.5 9021 and 902 2 Voltage Input Connec tions 4.5.1 Setup The calibration and verification function will require the application of precise voltage sources to the pressure voltage input pins of the 9021 and 9022 transducer i[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 4 - 15 4.5.2 Calibration Procedure The cali bration p rocedur es may be summar ized as fo llows: 1. Set all 9021/9022 channels for the desired gain (1, 20, 45, or 90) . (9022 temperature voltage input ga in is fixed at gain = 1) 2. Apply [...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 4 - 16 The above process is repeated for ea ch of the four (4) 9 021/9 022 gai n setting s (or sele cted ga in settings as needed for y our application). Calculat ion of the new ref erence coeffi cient is pe rformed as follow s: CoefOld =[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 4 - 17 A detailed step-by- step pr ocedure follow s that includes the specific 9021/9022 commands to be sent to the module under test. DESCRIP TION 9021/9022 COMMAND Set AD averagi ng to 32 to mi nimize reading jit ter w1020 Tur n o ff f [...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 4 - 18 The example command structure will retur n the requested coefficient in ASCI I floating point format. Reference Coefficien t 9021/9022 Comm and for gai n = 1 u01104 for gain = 20 u01105 for gain = 45 u01106 for gain = 90 u01107 for[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 4 - 19 4.6 Coefficient Storage The various calibration functions described in Sections 4.2 through 4.4 update the active offset and gain coefficients, respectively , in the module’s volatile main memory (RAM) only . These newer calibrat[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 4 - 20 As part of module initialization, all channels are automatically checked for att ached PSI 9400 sensors . If a digitally compensated 9400 sensor is attached, its parameters are u pl oaded to the module and used for calibrating the [...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 4 - 21 4.7.3 Download other parameters into volatile mem ory 4.7.3.1 For Non-digita lly Comp ensated 9 400 Sensor s Without Non -vola tile Memory or Non-9400 Sensors A user-de fined da te can be downloaded into volatile memory using the ?[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 4 - 22 Note: It is important to remember that this command, like the download com mands, only affec ts the vola tile copy of para meter da ta. This vo lati l e copy of para meter da ta is not actua lly c opied into non-vola tile memor y u[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 4 - 23 4.7.5.2 For No n-digitally Compens ated 9400 Sensors With Non-volatile Memory Non-dig itally compensated 9400 sensors w ith non-volatile memory ar e not affected by the ‘ w26 ’ comm and. The module will always use sensor EEPROM[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 4 - 24 4.8 Line Pressure Precautions When operating 9016 pressure scanner s at elevated line or re ferenc e pressu res, ca re must be taken when any comm and is issu ed that ma y r esult in shi fting of the calib ration va lve. The user m[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 5 - 1 Chapter 5 Service 5.1 Maintenan ce This section provides a detailed step-by -step guide for performing r epair and maintenance of typical NetScanner ™ System In tell ige nt Pressure Scanners. The method for upgra ding module firmw[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 5 - 2 NOTE: It must be emphasized that p rinted ci rcuit boar ds in 9016, 90 21, and 9022 mo dules are fi eld replace able , but are N OT field repairabl e . Figure 5.1a 9016 Top Plate Figure 5.1b 9021 Top Plate (prior to S/N 999) Figure [...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 5 - 3 Table 5.1 provides a conven ient cross reference summary of the components found in each Intelligent Pressure Scanner. This may be used as a guide to identify the appro priate com ponent replacement sections in this chapter. Table 5[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 5 - 4 When perform ing any type of maintenance of NetScanner ™ System compone nts, the following guidel ines and pre cautions sho uld always be foll owed: ! Veri fy that the wo rk area a nd technic ians are prope rly grounde d to preve [...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 5 - 5 Figure 5.2 9016 Scanne r Out of Housing Figure 5.2a 9022 Scanne r Out of Housing 5.1.2 Module D isassem bly The following procedure should be used to disassemble any model prior to any maintena nce: (1) Place the scanner with its ex[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 5 - 6 5.1.3.1 PC-206 Amplifier/Multiplexer Board (9016) The f ollo wing procedures should be used for re placement of the PC-206 Amplifier/Multiplexer Board. Use the tools and follow the gener al precautions described in Section 5.1.1 . ([...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 5 - 7 5.1.3.2 PC-242 Amplifier/Multiplexer Board (9021 ONLY) The f ollo wing procedures should be used for re placement of the PC-242 Amplifier/Multiplexer Board. The PC-242 is attached directly to the top plate of the 9021. Use the tools[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 5 - 8 Figure 5.3 PC-280 Board (3) Remove the three ( 3) 2-56 Ph illips hea d screw s securi ng the PC- 280 mountin g brac kets to th e top p late. These screws will be in l ine wi th th e PC-2 80 LEDs t hat pr otrud e thro ugh the top pla[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 5 - 9 Figure 5.3b 9022 PCBs Apart Figure 5.3a 9022 PC Bs Outside t he Housing 5.1.3.4 PC-315 Connecto r Interfa ce Board, PC-316 or PC 3 39 Signal Cond itioning P CB, and PC-317 Multiplexer PCB (9022) The following procedures should be us[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 5 - 10 (2) Notice f rom the a bove fig ures ( Figure 5.3a and 5.3b ) that the three PC boards (315, 316 or 339, and 317) are held together by standoffs and gold connector pins. I f there is a need to take th e boards apart, e nsure tha t [...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 5 - 11 Figure 5.4 Top View of DH200 NOTE: The hex-head standoff screws used on DH200 positions 2 and 15 are used to secure the PC-206. These hex- head s cre ws should not be o ver-ti ghtened or else the screw m ay break. ( Recom mended 4 [...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 5 - 12 Figure 5.5 Solenoid in Mo dule (5) Replace the PC-206 board as described in Section 5.1.3.1 and reassemble the module. Ensure that the two hex-head standoff screws are installed on DH200 positions 2 and 15 and that t hey align w it[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 5 - 13 (5) Attach the wiring harness to the solenoid and connec tor P6 of the PC-280 CPU board. (6) Reassemble the module. (7) Test your sca nner to ensure proper operation. 5.1.6 Replace ment of O-Ri ngs Pressure Systems’ ca libration [...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 5 - 14 Figure 5.6 DH200 Tran sducer O- Ring Replace ment (4) Using tw eezers, remove t he two (2 ) O-ring s from the DH200. Cle an the O- ring cu p with a lint-free applicator moistened with a cleaning fluid such as acetone, alcohol, Freo[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 5 - 15 5.1.6.2 Tubing Plat e O-Ring R eplacem ent The following is a step-by -step procedure to replace Tubing Plate O-rings in a Model 9016 Intelligent Pressure Sca nner. (1) Disassem ble the mo dule as de scribed in Section 5.1.2 . (2) [...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 5 - 16 5.1.6.3 Adapter P late O-R ing Replac ement Following is a step-by -step procedure to replace Ada pter plate O-rings in a Model 9016 Intelligent Pressure Sca nner. The adapter plate is located opposite of the tubing plate on the ca[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 5 - 17 5.1.6.4 Calibrati on Manifold P iston O-Ri ng Replace ment Following is a step-by -step procedure to replace Calibration Manifold O- rings in a Model 9016 Intelligent Pressure Sca nner. There are eig ht (8) pistons, each with an O-[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 5 - 18 Figure 5.7 Solenoid Val ve O-Ring R eplacem ent (7) Thoroughly clean the calibration manifold with a fast-evapora ting cleaning fluid that leaves little or no residue (e.g., alcohol, ac etone, Freon ® , etc.). Lightly spray the in[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 5 - 19 Figure 5.8 PC-317 Board (Trim Pot entiometer and Jumper 5.2 9022 Excita tion Trim The 9022 o utput volta ge is fa ctory set at 10 v olts. The f ollowing procedu re can b e used to t rim the 10 volt output (~±5%). (1) Disassemble t[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 5 - 20 approximately one half turn. Ensure there are no connectors from the P1 harne ss pinched between the top plate and the housing. Ensure the top plate g asket is properly installed. Install the screw that secur es the top panel to th[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 5 - 21 After NUSS has finish ed downloading the new fi rmware, wait approximately 30 seconds for your NetScanner ™ System module to reset before closing NUSS , else the newly installed firmware may be unreliable. WARNING: While updating[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 5 - 22 This page intentionally left blank.[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 6 - 1 Chapter 6 Troubleshooting Guide 6.1 Ethernet Module Troubleshooting 6.1.1 Checking Modu le Power-Up Sequence (1) Proper power to the module sho uld first be verified. If possible, ve rify that the output of the module power supply i[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 6 - 2 connection to the hub itself. If present, verif y that the hub link LED for the pressure scanner and the host computer are both active. I f the hub is functioning correctly , verify that the c ommun ications p ins in the mo dule int[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 6 - 3 NOTE: NetScanner ™ System modules are factory -configured to use a 200.xxx.xxx.xxx IP addre ss with a 192.0.0.0 subnet mask. These addresses were cho sen with the unders tanding that the mod ules would run on a totally priv ate ne[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 6 - 4 NOTE: NetScanner ™ System modules are curr ently designed to use RARP protocol a nd BOOTP protocol for Dynamic IP address assignment. When placed in Dy namic ad dressing m ode, (thr oug h t he TCP/I P protocol ‘w1301' co mm[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 6 - 5 Once in th e pr ope r TC P/ IP protocol setup, select the ‘ IP Addre ss ’ tab. Click on the butt on to enab le the field ‘ Specify IP Address .’ Once selected, the fields for IP address and Subnet will be ena bled. In th e I[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 6 - 6 If the ping test of the host computer’s IP passed, while the ping of the NetScanner ™ System module failed, check the following possible sources for error: ! Ensure the NetScanner ™ System mo dule’s I P has bee n assign ed ([...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 6 - 7 ! The module’s calibration valve is not placed in the correct position before executing the Span calibration command ( Calculate & Set Gain ). This command will not automatic ally shift the valve to the CAL position before tak[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 6 - 8[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 6 - 9 6.3 User Software For a complete description of NetScanner ™ Syst em software, please refer to the Net Sca nner ™ Unified Star tup Software (NUSS) User’s M anual.[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 7 - 1 Chapter 7 Start-up Software 7.1 Intr oduct ion The NetScanner ™ System Unified Startup Software (NUSS) allows y ou to oper ate, fr om a Windows ® -based host PC, a diverse network of pressure scanne r modules and/or standard/cali[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com 7 - 2 This page intentionally left blank[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com A - 1 Appendi x A All Comman ds — Quick Reference: Type Comm and id Command Function TCP/IP A Power-Up Clear B Reset C Configure/Control Multi-Point Calibrat ion (4 sub- commands ) V Read Transducer Voltages Z Calculat e and Set G ains [...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual Type Comm and id Command Function www.PressureSystems.com A - 2 UDP/IP Broadcast psi9000 Query Ne twork psireboot Reboot Spe cified Mo dule psirarp Ch ang e Sp eci fie d Mo dul e’s IP Address Resolution Method (then Reboot)[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com B - 1 Appendi x B NetScann er ™ System Response Error Codes: CODE MEANING 00 (Unused) 01 Undefined Command Received 02 Unused ( by T CP/IP) 03 Input Buffe r Overrun 04 Invalid ASCII Character Received 05 Data Field Error 06 Unused ( by [...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com B - 2 This page intentionally left blank[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com C - 1 Appendi x C Cable Diag rams Description Applicable Models Page Etherne t Inte rface Cable - un terminat ed host Etherne t Inte rface Cable 9016, 9021, and 9022 9016, 9021, and 9022 C-2 C- 3 9400 Series/9021 (D-Shell) Cable 9021 C-4 [...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com C - 2 NetScanner ™ System Ethernet Interfac e Cable P/N 9080[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com C - 3 NetScanner ™ System Ethernet Interfac e Cable 9080 Cable[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com C - 4 9096 Cable 9400/9021 (D-Shell) Cable[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com C - 5 9096 Cable 9400/9022 (Circula r Connect or) Cable[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com C - 6 9021 to Se ries 27 Int erface C able 9021[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com C - 7 9022 to Se ries 27 Int erface C able[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com C - 8 Calibration Cable (9022)[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com C - 9 Third-Party Sensor Interface Cable (9022)[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com C - 10 This page intentionally left blank[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com D - 1 Appendi x D Mounting Dimensions 9016 Mounting Dimensions ................................................... D-2 9021 Mounting Dimensions ................................................... D-3 9022 Mounting Dimensions .............[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com D - 2 9016 Mount ing Dime nsions[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com D - 3 9021 Mount ing Dime nsions[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com D - 4 9022 Mount ing Dime nsions[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com E - 1 Appendi x E NetScann er ™ System Ran ge Codes The following range code s are stored in each DH200 and digital 9400 a nd 9401 pressure transducer. The range c ode of each transducer ca n be read through the Read I nternal Coefficie[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual Range Code Full Scale Pressure Minimum Calibration Pressure www.PressureSystems.com E - 2 17 15 psid -12 psi 18 30 psid -12 psi 19 45 psid -12 psi 20 20 psid -12 psi 21 20 psi 0 psi 22 15 psi 0 psi 23 15 psid -10 psi 24 5 psi 0 psi 25 10 psi 0 psi 26 30 psi 0 ps[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual Range Code Full Scale Pressure Minimum Calibration Pressure www.PressureSystems.com E - 3 41 60 psid -12 psi 42 375 psi 0 psi 43 150 psi 0 psi 44 75 psi 0 psi 45 150 psi 0 psi 46 650 psi 0 psi 47 850psi 0 psi 48 150 psia 25 psi 49 750 psia 50 psi 50 75 psia 2.5 [...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com E - 4 This page intentionally left blank[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com F - 1 Appendi x F NetScann er ™ System/9000 Series Produ cts Model Purpose 9016/9116 - 16-chan nel I ntellige nt Pressur e Scanne r with Ethe rnet TCP/I P Host Port. 9021 - 12-channel Media-I solated Intelligent Pressure Scanner with Et[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com F - 2 This page intentionally left blank[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com G - 1 Appendi x G Binary Bit Map Bit Value (if Set) Bit Posit ion Binary Number 1 1 0000 0000 0000 0001 2 2 0000 0000 0000 0010 4 3 0000 0000 0000 0100 8 4 0000 0000 0000 1000 16 5 0000 0000 0001 0000 32 6 0000 0000 0010 0000 64 7 0000 00[...]

Pressure Sy stems, Inc. NetScanner™ Syst em (9016, 9021, & 9022) User’ s Manual www.PressureSystems.com G - 2 This page intentionally left blank[...]

Headquarters/Factory : Pressure Sy s tems, Inc. 34 Research Drive Hamtpton, VA 23666 USA Phone: (757) 865-1243 Toll Free: (800) 328-3665 Fax: (757) 865-8744 E-mail: sales@Pres su reSystems.com European Office: PSI, Ltd. 124, Victoria Road Farnborough, Hants GU14 7PW United Kingdom Phone: +44 1252 510000 Fax: +44 1252 510099 E-mail: PSI@WestonAero.c[...]