ProForm PCTL95235.0 инструкция обслуживания

M odel No. PCTL95235.0 Serial No. CAUTION Read all precautions and instruc- tions in this manual before using this equipment. Save this manual for future reference. TREADMILL EXERCISER User ’ s Manual QUESTIONS? As a manufacturer, we are com- mitted to providing complete customer satisfaction. If you have questions, or if there are missing parts,[...]

T ABLE OF CONTENTS IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 ASSEMBLY . . . . . . .[...]

3 1. It is the responsibility of the owner to ensure that all users of this treadmill are adequately informed of all warnings and precautions. 2. Use the treadmill only as described. 3. Place the treadmill on a level surface, with at least 2 m (8 ft.) of clearance behind it and 0.5 m (2 ft.) on each side. Do not place the tread- mill on any surface[...]

4 21. When folding or moving the treadmill, make sure that the storage latch is fully closed. 2 2. Inspect and properly tighten all parts of the treadmill regularly. 23. Never insert any object into any opening. 24. DANGER: Always unplug the power cord immediately after use, before cleaning the treadmill, and before performing the maintenance and a[...]

5 T hank you for selecting the new PROFORM ® 4 95 Pi t readmill. The PROFORM 495 Pi treadmill combines ad- vanced technology with innovative design to help you get the most from your exercise in the convenience of your home. And when you’re not exercising, the PRO- FORM 495 Pi treadmill can be folded up, requiring less than half the floor space [...]

6 ASSEMBL Y Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a s mall amount of lubricant may be transferred to the top[...]

7 2. Identify the Right Handrail (72), which has a large hole in t he left side. Feed the Upright Wire (42) into the hole in the bottom of the Right Handrail and out of the large hole i n the side. Note: It may be helpful to use needlenose pli- ers to pull the Wire Harness out of the hole. Attach the upper end of the Right Handrail (72) with a H an[...]

8 Small Hole 71 5. Hold the Console Base (47) near the Left Handrail (71). Attach the end of the ground wire on the Console Base to the indicated small hole in the Left Handrail with the Silver Ground Screw (75). 47 75 Ground Wire 42 6. Touch the Right Handrail (72) to discharge any static. Slide the sleeve off the connector as shown in the inset d[...]

9 10. Make sure that all parts are properly tightened before you use the treadmill. Note: Extra hardware may be included. Keep the included allen wrenches in a secure place. The large allen wrench is used to adjust the walking belt (see page 16). To protect the floor or carpet, place a mat under the treadmill. 9. Attach the Storage Latch (29) and t[...]

10 OPERA TION AND ADJUSTMENT T HE PRE-LUBRICATED WALKING BELT Your treadmill features a walking belt coated with high- performance lubricant. IMPORTANT: Never apply sil- icone spray or other substances to the walking belt or the walking platform. Such substances will deteriorate the walking belt and cause excessive wear. HOW TO PLUG IN THE POWER CO[...]

1 1 STEP-BY-STEP CONSOLE OPERATION Before operating the console, make sure that the power cord is properly plugged in (see page 10). In addition, make sure that the reset/off circuit breaker, located on the treadmill frame near the power cord, is in the reset position. Note: To prevent damage to the walking platform, always wear clean shoes when us[...]

12 To stop the walking belt, press the Stop button. The Time/Distance display will begin to flash. Note: During the first few minutes that the treadmill is used, inspect the alignment of the walking belt, and align it if necessary (see page 15). C hange the incline of the treadmill as desired. To change the incline of the treadmill, press either of[...]

13 HOW T O FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE Before folding the treadmill, adjust the incline to the lowest position. If this is not done, the treadmill may be per- m anently damaged. Next, unplug the power cord. CAUTION: You must be able to safely lift 20 kg (45 lbs.) to raise, lower, or move the treadmill. 1. Hold [...]

14 HOW TO LOWER THE TREADMILL FOR USE 1. Hold the upper end of the treadmill with your right hand. Press the storage latch to the left. Pivot the treadmill down until the frame and foot rail are past the storage latch. 2. Hold the treadmill firmly with both hands, and lower the tread- mill to the floor. Do not drop the treadmill frame to the floor.[...]

15 TROUBLESHOOTING Most treadmill problems can be solved by following the simple steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, see the front cover of this manual. PROBLEM: The power does not turn on SOLUTION: a. Make sure that the power cord is plugged into a surge suppressor, and that the[...]

16 PROBLEM: The walking belt slows when walked on S OLUTION: a . Use only a single-outlet surge suppressor that meets all of the specifications described on page 10. b . If the walking belt is overtightened, treadmill perfor- mance may decrease and the walking belt may be- come damaged. Remove the key and UNPLUG THE POWER CORD . Using the allen wre[...]

17 CONDITIONING GUIDELINES The following guidelines will help you to plan your ex- ercise program. For more detailed exercise informa- tion, obtain a reputable book or consult your physician. EXERCISE INTENSITY Whether your goal is to burn fat or to strengthen your cardiovascular system, the key to achieving the desired results is to exercise with [...]

18 SUGGESTED STRETCHES T he correct form for several basic stretches is shown at the right. Move slowly as you stretch—never bounce. 1 . Toe Touch Stretch Stand with your knees bent slightly and slowly bend forward from your hips. Allow your back and shoulders to relax as you reach down toward your toes as far as possible. Hold for 15 counts, the[...]

19 NOTES[...]

Part No. 230808 R0805A Printed in USA © 2005 ICON IP, Inc. ICON OF CANADA, INC., (ICON), warrants all mechanical and electrical components to be covered for one (1) year after the date of purchase. The motor is covered for one (1) year after the date of purchase. Labor is covered for one (1) year after the date of purchase. This warranty extends o[...]

REMOVE THIS P AR T LIST/EXPLODED DRA WING FROM THE MANUAL! 3 4 Note: Specifications are subject to change without notice. For information about ordering replacement parts, see the back cover of the User’s Manual. REMOVE THIS EXPLODED DRA WING AND P ART LIST FROM THE MANUAL Save this EXPLODED DRA WING and P ART LIST for future reference.[...]

P ART LIST—Model No. PCTL95235.0 R0805A Key N o. Qty. Description Key N o. Qty. Description Key N o. Qty. Description 1 1 Hood 2 4 3/4” Screw 3 1 Motor Belt 4 1 Motor Tension Bolt 5 2 7/16” Nut 6 1 Motor Star Washer 7 1 Flywheel 8 1 Drive Motor 9* 1 Motor Assembly 10 1 Reed Switch 11 1 English Latch Warning Decal 12 2 Frame Spacer 13 5 Frame [...]

EXPLODED DRA WING—Model No. PCTL95235.0 R0905A 72 2 49 49 49 31 48 48 49 29 44 2 10 58 12 19 13 13 60 23 13 12 14 5 16 18 17 14 15 5 16 82 83 87 15 96 86 15 95 92 38 92 38 93 81 58 83 82 58 79 80 39 69 39 13 53 57 39 39 57 51 55 13 62 63 64 32 66 25 41 68 85 65 25 15 94 58 1 1 56 71 35 33 3 6 7 8 9* 98 20 58 30 42 75 58 61 58 61 83 25 59 37 37 2 [...]