Promise Technology VTrak 15110 инструкция обслуживания

VT RAK 15 110 U SER M ANUAL V ersion 1. 1 / SR5 P R O M IS E V T r a k 1 5 2 0 0[...]

VTrak 15110 User Man ual ii Copyright © 2005 Promise T echnolo gy , Inc. All Right s Reserv ed. Copyri ght by Prom ise T echnolo gy , Inc . (Promise T echn ology). No part of this man ual may be repro duced or t ransmitte d in an y form w ithout the express ed, written permi ssion of Promise T echnology . T rademarks Promise , and th e Promise lo [...]

iii Content s Chapter 1: Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 About This Ma nual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Architec tural Desc ription . . . [...]

VTrak 15100 User Man ual iv Create a L ogical D rive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 Assign a SCSI Target ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 Log-out o f WebP AM PR O . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 Internet C onne ct ion us ing W ebPAM PR O . . . . . . . . [...]

Contents v Connectio n Statu s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94 User Rights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94 VTrak Manag eme nt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95 Lock O perations . . . . . . . . . . . . . . . . . . . [...]

VTrak 15100 User Man ual vi Logical Drive L UN Setti ngs . . . . . . . . . . . . . . . . . . . . . . . . . . . 126 Logical Drive A lias . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127 Physic al Drives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127 Spare Drives . . . . . . . . . . . . . . . . . . . [...]

Contents vii I/O Stati stics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158 Disk Array Manag ement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160 Disk Array Auto C reation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 161 Create New Disk Array . . . . . . . . . . . . . . . . . . . . . [...]

VTrak 15100 User Man ual viii Chapter 7: Technology B ackground . . . . . . . . . . . . . . . . . . . . . . . . 207 Introductio n to RAID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 207 Choosing a RAID L evel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 214 Choosing Stripe B lock Size . . . . . . . . .[...]

1 Chapter 1: Introductio n • About This Man ual, p age 1 • Ove rv ie w , page 2 • Archi tectural Des cription , page 3 • Featu res and Be nefits , page 3 Than k you for p urchasin g Promise T ech nology’ s VT rak ex ternal dis k array sub syst em. About This Manu al This User Manu al des cribes h ow to se tup, use a nd maint ain the VT ra[...]

VTrak 15110 User Man ual 2 Overv iew VT rak prov ides dat a storage sol utions fo r appli cations where hi gh performa nce and dat a protection are requi red. The failure of any sing le drive will not af fect data int egr it y or a cc es sib il ity of t he da ta i n a R AI D pro tec t ed lo g ical dri ve . Figure 1. VT rak 151 10 front view A defe [...]

Chapter 1: Introduction 3 The t wo st andard L VD SCSI i nterface pr ovides c ompat ibili ty with any system that uses a SCSI interf ace. No vendor un ique com mands ar e required for the ope rat ion of t he V T ra k sub syst em . Architectural Description The VT rak 151 10 is a Direct At tached S torage (DAS) subs ystem tha t can als o func tion i[...]

VTrak 15110 User Man ual 4 Up to 200 MB/se c sust ained bandwid th (over two iSCSI port s) High dat a thoughpu t. Hardwa re-assisted X O R engi ne High-spe ed p arity ca lculatio n for p arity ty pe logic al drives . Support s out-of-b and mana gement through RS232 an d 10/100 Ba seT Ethernet co nnecti ons Allows y ou to manag e the RAID sub system[...]

Chapter 1: Introduction 5 Specifi cations Drive Capa city: 15 SA T A and P A T A disk driv es (3.5" x 1" form factor onl y) External I/O Port s: Dual Ultra 160 SCSI wi th 68-pin VHDCI connections Sust ained T hroughp ut: Up to 200 MBp s (over t wo iSCSI ports) Sust ained I /Os: Up to 20,000 I/O s per sec ond Dat a Cache : Up to 5 12MB pr [...]

VTrak 15110 User Man ual 6 Suppo rted Opera ting Syste ms: Current : 8 A @ 10 0 V AC; 4 A @ 200 V AC (max. rating w ith two pow er cords) Powe r C ons um pti on : 44 0 w atts Power Su pply: Dual 500W , 100–240 V AC auto-r anging , 50–60 H z, dual hot sw ap and r edunda nt with PFC , N+1 des ign Therm al Outpu t: 1590 BTU/ hour (ma x current) Op[...]

7 Chapter 2: Inst allation • Unp ack the VT rak storag e subsyste m (bel ow) • Mo un t VTrak 15 1 10 i n a R ack (pag e 8) • Install Disk Drives (p age 9) • V erify the SCSI HBA Card (p age 15) • Conne ct the SCSI Cables (p age 16) • Conne ct the Manag ement Cabl es (page 22) • Conne ct the Power (p age 23) • Set-up Manag ement C on[...]

VTrak 15110 User Man ual 8 Mount VT rak 151 10 in a Rack Figure 1. Rackmounte d VTrak 151 10 The VT rak 151 10 inst alls dire ctly to th e rack with or witho ut using the su pplied moun ti ng r ails . Figure 2. Moun ting rail instal lation P R O M IS E V T ra k 1 5 2 0 0 V e rt ica l Rack Post Direct at tac h to post Moun ting Ra il (inc luded) VT [...]

Chapter 2: Inst allation 9 If yo u plan to use th e mountin g rails, fo llow th is proced ure to i nstal l them: 1. Att ach one e nd of t he rail to t he back side o f the rack ’s fro nt post. 2. Repos ition the adjus ting scre ws as need ed to fit th e rail to the r ack prope rly . 3. Att ach the o ther end of the rail to the ba ck si de of the [...]

VTrak 15110 User Man ual 10 Figure 3. VTrak 151 10 Dis k Drive ac cess Import ant Before in st alling a Paral lel A T A disk drive, be s ure th e jumpers on the dis k drive a re set for mast er operati on. Never set a dr ive fo r slave operation . Note Y ou can us e disk d rives of d if ferent man ufactur ers and s izes. In logic al drives with di [...]

Chapter 2: Inst allation 11 T o remove a Drive Carrier from the VT rak, pull the Driv e Carrier L atch Handl e and r emove an unused D rive Carri er (see Fig ure 3). Figure 4. Drive Carrier mounting holes Note th at the Drive Carri er has several mounting holes (above). T hose marked with a triangl e are for di sk dr ives. Cau tio n Be sure to inst[...]

VTrak 15110 User Man ual 12 Serial A T A Disk Drives Figure 5. SA T A Disk Dri ves mount a t the front of the carrie r 1. Careful ly lay t he driv e into the drive ca rrier at t he front , so that th e scr ew hol es on t he bo t tom line up . 2. Inse rt the scre ws through the holes in the Drive Carrier and in to the botto m of t he d is k dr iv e [...]

Chapter 2: Inst allation 13 Parallel A T A Disk Drives In ord er to use P arallel A T A disk driv es in VT rak, you mu st first in st all a P A T A-to- SA T A adapter av ailable from Promi se T echnology . Figure 6. P A T A Disk Drives re quire a P A T A-to-SA T A adapter 1. Obt ain the needed q uantity of P A T A-to-SA T A adapters from your Promi[...]

VTrak 15110 User Man ual 14 Drive Numbering Each disk dri ve in VT rak is id entifie d by a nu mber used for cre ating and man aging logic al drives. VT rak numbers disk driv es from left to right. Numbers a st amped a bove eac h driv e bay for e asy inde ntific ation. Figure 7. VTrak disk driv es are numbe red left to right Cau tio n If you plan t[...]

Chapter 2: Inst allation 15 V erify the SCSI HBA Card Dat a travels b etween th e Host PC and the VT rak stora ge system through a SC SI conn ection. T herefore, th e SCSI HBA ca rd is an e ssential part of the Host PC and V T rak sy stem. The t able below lists the mini mum and preferre d specifi cations for a SCSI HBA card. Refer to your sy stem [...]

VTrak 15110 User Man ual 16 Connect the SCSI Cables Inst allation of th e VT rak is very similar to a st andard SCSI drive. The SCSI connector accepts the V ery Hi gh Density Connector Interface (VHDCI), 68- pin, Low V olta ge Dif feren tial (L VD) SCSI cable us ed on many SCSI devic es. Figure 8. VTrak 151 10 SCSI conn ections When you at tach t h[...]

Chapter 2: Inst allation 17 The VT rak has four 68-pi n, VHDCI SCSI connectors and two se parate SCSI chan nels. The se co nnectors are used i n one of five ways: • Config uration 1: One VT rak, one Host PC, o ne SCSI HBA card • Config uration 2: One VT rak, one Hos t PC, two SCSI HBA cards • Config uration 3: One VT rak, tw o Host PCs, one S[...]

VTrak 15110 User Man ual 18 Configuration 1: One VT rak, one Hos t PC, one SCS I HBA car d Att ach the SCSI cable to e ither of VT rak’s S CSI chann els. Configuration 2: One V T rak, one Host PC, two SCSI HBA car ds Y ou can u se a dua l-channel SCSI HBA card for this a pplicati on. SCSI T erminator SCSI Cable SCSI HBA Card Host PC VT rak Connec[...]

Chapter 2: Inst allation 19 Configuration 3: One VT rak, two Host PCs, o ne SCSI HBA card in e ach This arrangemen t allows y ou to man age the s ame VT rak from two dif ferent Host PCs. Host PC 1 Host PC 2 SCSI HBA Cards SCSI Cables SCSI T erminators VT rak[...]

VTrak 15110 User Man ual 20 Configuration 4: T w o VT raks, one Hos t PC, one SCSI HBA card (dai sy chain) Do the followi ng when daisy-c haining VT raks: 1. Use a 68-pin VHDCI cable to attach each VT rak array to the SCSI chain. Y ou can c onnect u p to eight (8) VT raks on th e same SCSI chain. 2. Set a differe nt SCSI T arget ID fo r each VT rak[...]

Chapter 2: Inst allation 21 Configuration 5: T wo VT raks, one Host PC, two SCSI HBA car ds A Host PC manag es two VT raks throu gh sep arate SCSI connecti ons. An an alter native to daisy chainin g, it can provide i ncreas ed I/O pe rformance . Y ou can u se a dua l-channel SCSI HBA card for this a pplicati on. With one to eig ht VT raks conn ecte[...]

VTrak 15110 User Man ual 22 Connect the Manageme nt Cables VT rak 151 10 has t wo types of Mana gement c onnect ions: • Man agement Po rt connect ion – En ables you to mo nitor th e VT rak over yo ur network using t he Web P AM PRO Sof tware. VT rak supp orts Eth ernet and T elnet prot ocols. • RS-232 S e rial c onnectio n – Enable s the Co[...]

Chapter 2: Inst allation 23 Macintosh Users If yo ur Host PC is an Apple Macin tosh, you do not have the RS-232 serial po rt need ed to set-u p a Ma nagemen t conn ection. Promi se has devel oped a T elnet util ity for the Ma cintosh that est ablishes a T elnet conn ection b etween th e Macintos h PC and the VT rak without an ini tial setu p thoug [...]

VTrak 15110 User Man ual 24 Plug the powe r cords in to the p ower co nnections on bo th power supplies . Use the re tainin g bail s to hold the po wer cords i n place a nd prev ent an ac ciden tal dis connection. T urn both power su pplie s on. When the powe r is switc hed on, th e LEDs o n the front o f the VT rak will light up. Figure 12. VT rak[...]

Chapter 2: Inst allation 25 Aft er a few mom ents the Power/Acti vity and Disk S tatus LEDs should display green . If the re is no disk drive in the carrie r , the Di sk S tatus LED will d isplay green wh ile the Po wer/Activity L ED will remain d ark. Set-up Management Co nnections As expl ained earlier , VT rak 151 10 has two ty pes of Managem en[...]

VTrak 15110 User Man ual 26 For a fu ll l is t of CLU c apa bili ti es and f u nct ions , see C hap te r 5 on pag e 13 3. Set IP Addresses and Subnet Mask This procedure is required for a net work connec tion to the VT rak. In order for th e network connec tion to w ork, you must set the IP a ddresses of the Ma nagement Port an d Gateway , and se t[...]

Chapter 2: Inst allation 27 The M anageme nt Port sett ings dis play . ---------- ---------- ------ ---------- ------ ---------- ----------- ----- ------ Manage ment Por t IP Addr ess: 10.0.0 .2 Sub net Mask: 2 55.0.0.0 Gate wa y IP Ad dres s: 0. 0.0. 0 T eln et: di sab led TFTP Server IP Address : 0.0.0.0 SNMP Name: Sonoma SNMP Location: Promise -[...]

VTrak 15110 User Man ual 28 5. T ype the new IP ad dres s and pr ess En ter . The CLU co nfirms the new manag ement port IP addres s . 6. Press Ent er to return t o the Mana geme nt Port menu . 7. Repea t step s 3 tho ugh 6 t o set the Su bnet m ask and Gatewa y IP addres s 8. Res tart the VTrak. Import ant All three settings m ust be co rrect in o[...]

Chapter 2: Inst allation 29 Set Up T elnet Connection A T elnet connect ion al lows yo u to acce ss VT rak’ s CLU over the network. This allo ws RAID managem ent over a greater distan ce from th e VT rak it self. This procedu re is req uired for a Host PC that does not hav e an av ailable RS-232 serial p ort. The CLU screen lo oks and works exac [...]

VTrak 15110 User Man ual 30 Make a T elnet Connection The T elnet fea ture on VT rak mu st be ena bled. See “En able T elnet on VT rak” on p age 29. HyperT erminal (Windows) or M inicom (Linux) 1. Laun ch the HyperT ermina l or Mini com a pplicati on. 2. Open a termin al window ,type a name a nd click OK (ab ove, left). 3. In the Connec t using[...]

Chapter 2: Inst allation 31 8. T ype a p assword ( pas s w o r d is the d efault) and press Ente r . The CLU screen opens. See Chapter 5 (p age 133) for in formation ab out how to us e the CL U. Command Line (Windows) or T erminal Icon (Linux) 1. Go t o the Wind ows co mman d line or c lick the Linux te rminal icon. 2. T yp e telnet and pre ss Ente[...]

VTrak 15110 User Man ual 32 3. T ype a lowe r-case let ter O, s pace , the VT rak’ s IP addres s, sp ace, 2 300. Exampl e: o 192.16 8.10.48 2300 4. Pres s Enter . The t elnet logi n screen appea rs. 5. In the T elnet Logi n, typ e a user na me ( ad minist rator is t he defa ult) and pre ss Enter . 6. T ype a p assword ( pas s w o r d is the d efa[...]

Chapter 2: Inst allation 33 Instal l WebP A M PRO Software W eb-Based P romise Array Man agement—Pro fessiona l (W ebP AM PRO) sof tware p rovide s a brow ser-based graphic user in terface used to monitor an d man age VT rak and i ts log ical driv es. Becau se it wo rks over your n etwork, it c an mon itor and co ntrol mul tiple VT raks. W ebP AM[...]

VTrak 15110 User Man ual 34 CIMOM Agen t VT rak ship s from th e fact ory with a CIMO M agent i nstall ed. . Figure 7. W ebP AM PRO on a netw ork Desktop PC with Interne t browser Lapto p PC with In ternet brow ser The Internet Networked PC with In ternet browse r Networke d PC with Ut ility Serv er Router & Firewal l Rack mounted VT rak Subsy [...]

Chapter 2: Inst allation 35 Internet Browser T ypicall y an Intern et brows er comes w ith your o perating s ystem. W ebP AM PRO does not incl ude a browser . For compu ters th at will remotely monitor an d manage the RAID, th e Internet Browser is th e only sof tware re quired. Y our Intern et Browse r provides the mean s for you to monito r and c[...]

VTrak 15110 User Man ual 36 2. Inse rt the softwa re CD into yo ur CD-ROM driv e. 3. In the CD win dow , do uble-clic k on the we bpa m...bin icon to begi n inst allati on (right). 4. When the Run or Displ ay? dial og box appears, clic k Run in T erminal . Aft er several moment s, the T erminal window clo ses and t he first W ebP AM PRO in st allat[...]

Chapter 2: Inst allation 37 Inst allation Under All Supported Operating S ystems, continued In the follow ing exam ples, the Windo ws inst all screens are show n. Linux and Mac O S X inst all screens have a slightl y dif ferent a ppearance but th e infor mation , choice s and ac tions required are exactly the sam e. 1. When the Int roduction scree [...]

VTrak 15110 User Man ual 38 3. When the SSL S ecurity Opti ons scre en appears (above), you can c heck Extern al Security . An explanat ion follows. External SSL Security – Applies s ecurity to all con nections invol ving the Intern et or out side your com pany firewall. Secu rity option s are invisibl e to autho rized users. Prom is e T ech nol [...]

Chapter 2: Inst allation 39 4. When the Util ity Server Informatio n screen appears (be low), type the requ es ted net wor k ad dr es ses. Y ou mus t type the correct in formation for Email Se rver an d Email Se nder or the i nstal lation w ill not pro ceed. Email Serve r – T ype in the na me of you r comp any's em ail se rver . Email Sende [...]

VTrak 15110 User Man ual 40 5. When the Choo se Inst all Folder sc reen appea rs (bel ow), make y our sel ection of a folde r for the WebP AM PR O applic ations y ou are ins tal ling. The d efault fol der is C:W ebP AM . If you want a diffe rent fol der , type its loc ation and click th e Choose... b utton. If yo u change your m ind and w ant the [...]

Chapter 2: Inst allation 41 • If yo u need to make chang es, clic k the Pr evious b utton to return to th e Inst all Folder screen. • If yo u are s atisfied with the proposed inst allation , click the Inst all b utton. 7. When the Inst all Co mplet e screen appears (a bove), the inst allation process is f inished. Click th e Fini sh button to g[...]

VTrak 15110 User Man ual 42[...]

43 Chapter 3: Setu p • VT rak Setup with W ebP AM PRO (bel ow) • VT rak Setup with the CLU (p age 57) Aft er inst allation , the next step i s to configu re VT rak. Y ou can do this wi th W ebP AM PRO or the Comm and L ine Utility (CLU), whicheve r you p refer . This Chapter on ly de als with b asic functions n eeded to setup a new VT rak. F or[...]

VTrak 15110 User Man ual 44 Secure Con nectio n • W ebP AM PRO us es a secure HTTP connectio n . . . . . . . . . . .htt ps:// • Enter t he PC/Serv er ’ s IP address . . . . . . . . . . . . . . . 192.168. 10.46 • Enter t he Port n umber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . :8443 • Add to launch W ebP AM PRO . . . .[...]

Chapter 3: Setup 45 Aft er sign-in , the W ebP AM PRO openi ng screen appears. The f irst time you log in to We bP AM PRO, there wil l be no Subsyste ms (VT raks) or U sers in t he syste m. Promis e recomm ends t hat you c reate th e Subsys tem(s) first , then add the Use r(s). Note Make a Bookmark (N etsc ape Nav igator) or set a Favorit e (Intern[...]

VTrak 15110 User Man ual 46 Add a Subsystem (VT rak) 1. Click o n Adminis trator T ools icon to display the menu . 2. Click on th e Subsys tem Mana gement icon . 3. Click the Add Su bsystem tab (ab ove). 4. In the IP Address fie ld, type i n the VT rak’ s Mana gement Port IP addre ss. Do not type t he PC/Server’s IP ad dress. 5. When you a re d[...]

Chapter 3: Setup 47 Servi ce Manag ement – SN MP , T eln et and CI M services Cont ro ll ers – RA ID Ma n agem ent on VTrak Encl osures – P ower sup plies, c ooling, c ache batt ery , circui t cards Disk Arrays – Cr eation a nd man agement of disk a rrays and logical drives S pa re Drives – Physi cal drives a ssigned as globa l or de dica[...]

VTrak 15110 User Man ual 48 Create a Disk Array A dis k array is a colle ction of p hysical drives i n a RAID . Logica l driv es are ma de from disk arr ays. T o acc es s the Di sk Ar ra y tab: 1. Click on the Su bsyst em ico n in T ree Vi ew . 2. Cli ck on the VTrak ic on. 3. Clic k on t he Di sk Arr ays icon. 4. Click on th e Create tab. There ar[...]

Chapter 3: Setup 49 Automatic Option The Di sk Array Aut omati c Creatio n option e nables y ou to cr eate a ne w disk array foll owing a default set o f p arameters . One l ogical drive will b e made automa tically when yo u cr eat e th e dis k a rr ay . When you choo se the Automatic option, the foll owing p arameters di splay: • Disk Array s ?[...]

VTrak 15110 User Man ual 50 T o create a new dis k array: 1. Ch eck the b oxes to s elect any one or com bination of the fo llowin g: • Redun dancy – The array will re main availabl e if a physica l drive fa ils • Cap acity – The gre atest pos sible am ount of da ta cap acity • Perform ance – The high est poss ible r ead/write speed •[...]

Chapter 3: Setup 51 •O t h e r 4. Click the Up date bu tton. Or chec k the Auto matic Update box and upda tes will o ccur auto maticall y . The f ollowin g param eters display : • Disk Array s – The n umber of p hysical drives in th e disk a rray , their ID num bers, conf igurab le cap acity an d the num ber of logi cal d rives to b e creat e[...]

VTrak 15110 User Man ual 52 1. Enter a name for the disk array in th e field pro vided. 2. Ch eck the b ox to enab le ini tializat ion, if desire d. If yo u check ed the initializ ation box , select the ty pe of initi alizatio n from the dropd own menu. • Quick – Erases the reserve s ectors o f the phys ical driv es being added to the disk arra[...]

Chapter 3: Setup 53 9. If yo u accept these p arame ters, pr oceed to the next s tep. If yo u do NOT a ccept these p arameters , review and mod ify your s electio ns in th e previou s step s. 10. When yo u are d one, cl ick the Subm it bu tton. The n ew disk a rray app ears in th e Disk Array List on the Info rmatio n ta b. Proce ed to logi cal dr [...]

VTrak 15110 User Man ual 54 Create a Logica l Drive When you cr eate a disk array (see p age 48), you automa ticall y create one logical driv e also . If the ini tial l ogical d rive us ed less than th e full ca pac ity of th e disk array , you c an create a dditio nal logi cal dri ves from the same disk array . T o ac cess th e D isk A rr ay – C[...]

Chapter 3: Setup 55 In orde r to use th is logic al drive to read and write dat a, you m ust pa rtition and format it using the Hos t PC’ s operatin g system. Assi gn a SCSI T ar get ID The te rm T arget ID re fers to the SCSI address of the two cha nnels on the RAID subs ystem. A S CSI bus h as an Initiator , suc h as the SCSI card inside th e H[...]

VTrak 15110 User Man ual 56 Log-out of W ebP AM PRO There are two wa ys to log out of WebP AM PRO: • Close your br owser wi ndow • Click Logout o n the W ebP AM PRO banner (be low) Aft er logg ing out, y ou must enter y our user name and pa ssword to l og in again. Click ing L ogout brin gs yo u back to the Lo gin Screen . Internet Connection u[...]

Chapter 3: Setup 57 VT rak Setup with the CLU Set up with the CLU c onsists of the fol lowing ste ps: 1. CLU Conn ection (below). 2. Crea t e a Lo gi cal Dr iv e • Autom atically (page 58) • Man ually (p age 59) 3. Assign a SCSI T arget ID (page 63). 4. Exit the CLU (pa ge 64). CLU Connection Before you begi n, be sure the nu ll modem cable is [...]

VTrak 15110 User Man ual 58 Create a Disk Array The f ollowin g procedu res provid e the b asic ste ps ne eded to c reate a disk array and a logical drive to get you r VT rak running quick ly . Y ou can c reate your di sk array automat ically or manual ly . Y ou might p refer to let VT rak to crea te the disk array autom atically if you are new to [...]

Chapter 3: Setup 59 SMAR T chec k: enabled I nit iali zat ion : fu ll Crea te Logical Drive now (y/n)?> y 4. If y ou ag re e wi t h th e spe ci fic at io ns , pr ess Y and Ent e r . If y ou di s agr ee, pre ss N an d En ter . T hen s ele ct Create New Disk Array (belo w) and i nput your o wn sett ings. This comple tes di sk array c reatio n. Go [...]

VTrak 15110 User Man ual 60 *1 Maxtor 5A250J0 251 GB *3 WDC WD2000JB-00FUA0 200 GB *4 WDC WD2000JB-00FUA0 200 GB *7 ST380013AS 80 GB *9 WDC WD1200JD-00FYB0 120 GB 11 ST380013AS 80 GB 12 WDC WD1200JD-00FYB0 120 GB 15 Maxtor 6Y080M0 82 GB 4 Phys ica l Dr ives ha ve been sel ect ed. Enter Physical Drive ids and/or id ranges separ ated by commas. F or [...]

Chapter 3: Setup 61 Create Disk Array now(y/n)?> y 7. Revie w the li st. If y ou agree w ith the list, p ress Y and Enter . If you d isagree with th e list, pr ess N and Enter , then selec t Cre ate New Disk Array again. If yo u click ed Y , the new d isk array appears. ID Name RAID SBS CAP Member PDs Status ---------- ---------- ------ --------[...]

VTrak 15110 User Man ual 62 Create a Logica l Drive A lo gic al dri ve is an ent i ty ma de fro m a di s k arr ay t h at yo ur PC ’s oper a tin g syst em reco gnizes a s a si ngle dis k driv e. 1. From the Dis k Array Ma nagement menu, press 4 a nd Enter to access t he Disk Array Properti es. 2. Press 1 a nd Ente r to acces s Creat e Logical Driv[...]

Chapter 3: Setup 63 Assign a SCSI T arget ID The t erm Ta r g e t I D refers t o the SCSI add ress of th e two chann els on th e RAID subsy stem. A SC SI bus has an In itiator , such as the SCSI c ard insi de the Host PC, and at le ast one T arget, such a s the Controll er and Lo gical D rives in side the RAID s ubsystem . Each t arget m ust have i[...]

VTrak 15110 User Man ual 64 ----- ----------- ----- ----------- ----- 20 Select the SCSI channel( 1-2) Press R to return a fter finished> Exit th e CLU Close the te rminal em ulation w indow to exit th e CLU.[...]

65 Chapter 4: Ma nagement with W ebP AM PRO This chapter d escribes using W ebP AM to mo nitor and m anage y our RAID system . This c hapter i s divid ed into se ction s for majo r WebP AM co mponent s as shown above. VT rak S tatus Indicators Even though W ebP AM PRO offers comprehe nsive m onitori ng of VT rak, the LED indi cators on the VT rak u[...]

VTrak 15110 User Man ual 66 See p age 189 fo r more info rmatio n about fie ld-replac eable compone nts . See p age 234 fo r a discuss ion of cri tical and of fline logical d rives. Dri ve Statu s Ind i ca tor s The re a re t wo LEDs on each Dr iv e C arri er . T hey r e por t th e pr es enc e of po we r and a disk dri ve, and t he curre nt condit [...]

Chapter 4: Management with WebPAM PRO 67 The VT rak spins up the disk drives s equentia lly in ord er to equal ize p ower draw durin g start -up. Af ter a few m oments the Power/Ac tivity a nd Disk S tatus L EDs shou ld displ ay green. See f or a discu ssion o f rebuildi ng and failed di sk drive s. Audible Alarm VT rak’ s audibl e alar m has fou[...]

VTrak 15110 User Man ual 68 Log-in/L og-out Log-in to We bP AM PRO 1. Laun ch yo ur Bro wser . 2. In the Browser add ress field, ty pe in the IP address of the PC or Server where y ou inst all ed Web P AM PRO, a s explained below . Do n ot type the VT rak’s IP address . Note th at the IP address shown b elow is on ly an example . The IP add ress [...]

Chapter 4: Management with WebPAM PRO 69 3. When the openi ng screen ap pears, type your use rname in the Logi n ID field and y our pa ssword in the Pas sword field . The l ogin and p assword a re case sens itive. If thi s is the first time you ar e running We bP AM PRO, l og in as adm ini s tr ato r and type in the def ault p assword , which is pa[...]

VTrak 15110 User Man ual 70 Aft er sign-in , the W ebP AM PRO openi ng screen appears. Figure 3. WebP AM PRO O penin g Screen If yo u setup y our VT rak usin g WebP AM PRO (see Chapte r 3) you will have one Subs ystem, th e Adminis trator as t he only U ser and one logic al drive. If this is the firs t time you ar e logging i n to W ebP AM, there w[...]

Chapter 4: Management with WebPAM PRO 71 Subsystem Management Add a Subsystem (VT rak) 1. Click o n Adminis trator T ools icon to display the menu . 2. Click on th e Subsys tem Mana gement icon . 3. Click the Add Su bsystem tab (ab ove). 4. In the IP Address fie ld, type i n the VT rak’ s Mana gement Port IP addre ss. Do not type t he PC/Server?[...]

VTrak 15110 User Man ual 72 1. Click the Subs ystem M anagemen t icon u nder Admin istration T ools. This windo w displ ays a list of Subs ystems (VT raks) config ured to this W ebP AM ins tallati on. 2. Click on th e hypertex t link to see an i ndivi dual Subsy stem. This window p rovide s access inform ation on a n indivi dual Su bsystem and edi [...]

Chapter 4: Management with WebPAM PRO 73 Acces s a Subs ystem ( VT rak) The W ebP AM PRO CIM OM Agent resides o n the VT rak and send s the mon itoring dat a to the Utili ty Server an d on to the Browse r . In T ree V iew , a newly crea ted Subsys tem l ooks lik e this: Each Subsystem (VT rak) is i dentified by an icon a nd it s IP Address . Below [...]

VTrak 15110 User Man ual 74 Subsystem Mana gement Window T o ac cess th e Ma nage m ent Wind ow for an i ndiv i dual Su bsys te m (V T ra k), clic k on th e Subsys tem ico n in T ree Vi ew . The result is a dif ferent windo w than cli cking the Subsyst em Manag ement ic on descri bed ab ove. From this poin t, you can: • V iew the Logfil e • Acc[...]

Chapter 4: Management with WebPAM PRO 75 T o save th e Log Fil e: 1. From on the Events tab dropdown m enu, sel ect Save L ogfile . 2. In the Save Even t box, ty pe a file n ame for th e Logfi le. The n ame can conta in up to 40 chara cters, let ter and numbe rs only , no space s. 3. Clic k the Submit button. 4. In the confir mation b ox, cl ick th[...]

VTrak 15110 User Man ual 76 Delet e a Subsystem 1. Click the Subs ystem M anagemen t icon u nder Adm inistrati ve T ools. T he Host L ist ap pears. 2. Click o n the Del ete Subsyste m tab . 3. Click th e Select fo r Deleti on box of the Subsy stem you wan t to del ete. 4. Clic k the Delete Selection button. A con firmation messag e appea rs.. 5. Cl[...]

Chapter 4: Management with WebPAM PRO 77 User Management Add a User 1. Log i nto W ebP AM as the Adminis trator . 2. In T ree V iew , click on User M anagemen t. In the right fram e, you wil l see a li st of t he current Users. 3. Cli ck t he C rea te tab. 4. Ente r the new Use r Nam e, Pa ssw ord , V e ri fy Pas swo rd ( s ame pas swo rd ). 5. If [...]

VTrak 15110 User Man ual 78 7. When you a re finishe d making your selectio ns, cl ick the Submi t button . • If y ou chec ked th e Assign Email N otifica tion box , you w ill be transfe rred to the Select Ev ents p age (see Even t Notific ation, be low). • If yo u did NO T che ck the As sign Email No tificatio n box, you wi ll be trans ferred [...]

Chapter 4: Management with WebPAM PRO 79 The i mage abo ve was shortened to fit i nto the av ailab le sp ace. T o save ti me and e ffo rt, check C ritical Ev ents, All Eve nts, or the compone nt- spec ific box es. The tabl e bel ow list s all event s and the ir mea nings. C ritica l event s are marked w ith an asterisk (*) Item Mean ing Critical Ev[...]

VTrak 15110 User Man ual 80 Illega l Secondar y Identify A target r eceiv ed a sec ond Identi fy me ssage w ith a dif ferent LU N. Mess age Parity Error Detected possib le p arity error in mess age betw een initia tor and t arget. Bus Rebo ot The VT rak sys tem has re booted . Connect ion Eve nt Notif ication All event s relate d to the Hos t PC-to[...]

Chapter 4: Management with WebPAM PRO 81 Logic al Drive Migratio n Comp leted A logic al drive finished exp ansion a nd/or cha nge of RAI D le vel Logic al Drive Migratio n S topped A logic al drive expan sion a nd/or chan ge of RAI D level halted be fore co mpletion . Logic al Drive Rebuil d St a r t A logic al drive began a reb uild. Logic al Dri[...]

VTrak 15110 User Man ual 82 See Cha pter 7: T roubles hooting fo r instru ctions on what to d o when any of these mes sages ap pears. Logic al Drive Perc ent Comp leted A progres s report on logical drive op erations t aking pl ac e. Enclosure Event Notif ication All eve nts rel ated to th e encl osure. Enclosure Power Dow n* Power t o the encl osu[...]

Chapter 4: Management with WebPAM PRO 83 Delete a Us er 1. Log i nto W ebP AM as the Adminis trator . 2. Click the Us er Manage ment icon u nder Admin istrator T ools. 3. Click th e Delete t ab. 4. Click the box of the Us er you w ant to del ete. 5. Clic k the Delete User(s) button. Manage User Right s The Ad ministra tor uses t his pa ge to mod if[...]

VTrak 15110 User Man ual 84 The Mod ify/V iew User s creen app ears (belo w). 3. In t he Mo dif y /View Us er s cre en, sp ecif y your Su bsys te m M ana geme nt Right s, Emai l address and Even t Notificati on. See th e Permiss ions t able bel ow . Y ou can also set the se permission s from the Subsy stem User Righ ts scree n. 4. When you a re don[...]

Chapter 4: Management with WebPAM PRO 85 Change Pass word Each User ca n change his/her p assword. If the User has emai l aler t notifica tion, he/s he can al so ch ange t he email address a nd se lection o f even ts. 1. Log i nto W ebP AM under y our Use r Name. 2. Click the Perso nal Inf ormation icon u nder Admin istration T ools . 3. Ente r a n[...]

VTrak 15110 User Man ual 86 Setup Ema il Alert Noti fication W ebP AM c an alert yo u to th e probl ems and processe s hap pening to your RAID throu gh email mess ages. Y ou setup Email No tificatio n for ea ch Subsy stem (VT rak) and each U ser individu ally . A Subsystem must ex ist befo re you ca n set- up Emai l Notificat ion for it. Thes e ste[...]

Chapter 4: Management with WebPAM PRO 87 4. Selec t the alert event s you want rep orted via email. T o save time and ef fort, che ck Critica l Event s, All Events , or the comp onent-spec ific boxes . See p age 79 for a list of e vents and th eir meani ngs. 5. When you a re done , click the Submit button. The Us er list appears again. Y our chang [...]

VTrak 15110 User Man ual 88 3. Set th e Web server par ameters: 4. Clic k the Submit butt on when you a re done . If yo u change the W ebP AM PRO sec urity settings, rest art the T omcat servi ce for the n ew param eters to t ake ef fect. See Re sta rt T omcat Servic e (Windows ) (p age 91). Ema il 1. Click the Sof tware M anagemen t ico n under Ad[...]

Chapter 4: Management with WebPAM PRO 89 3. Set th e Email p aramete rs: 4. Clic k the Submit butt on when you a re done . Firmware Up date This tab is used to update the firmware on VT rak subsystem s. See Fi rmware Update on p age 190 for instruc tions on how to u pdate V T rak’s fir mware. 1. Click the Sof tware M anagemen t ico n under Adm in[...]

VTrak 15110 User Man ual 90 3. Enter t he name o f the firmwa re upgrade *. img file in th e Select Fi rmware fiel d. 4. Check the b oxes bes ide th e subsyste ms who se firmware you wan t to upda te. 5. Clic k the Submit button. TFTP Server The T FTP Server tab en ables yo u to de signate a TFTP direc tory and p ort number on the s erver where the[...]

Chapter 4: Management with WebPAM PRO 91 Refres h Time This tab s ets the refres h interval for the Eve nt Fram e. 1. Click the Sof tware M anagemen t ico n under Adm inistrati on T ools. 2. Click the Re fresh T ime t ab. 3. Enter t he refresh interva l in second s. 4. Clic k the Submit butt on when you a re done . Rest art T omcat Servi ce (Window[...]

VTrak 15110 User Man ual 92 Promi se T ech nology pr ovide s a defaul t certific ate for the serve r as well as for inter nal dat a commu nication . However , it is always b etter to ins tall y our own certi ficate for the web ser v er . And, if po ssible, v erify ce rtificate b y certifi cate autho rity like V erisign or Thwate. Secu rity option s[...]

Chapter 4: Management with WebPAM PRO 93 T o save th e Log Fil e: 1. Log i n as the Administra tor . 2. Click on the Su bsyst em icon. 3. Click on th e Event s t ab. 4. From on the Events tab dropdown m enu, sel ect Save L ogfile . 5. In the Save Even t box, ty pe a file n ame for th e Logfi le. The n ame can conta in up to 40 chara cters, let ter [...]

VTrak 15110 User Man ual 94 Connection S t atus The Su bsystem –Connecti on S ta tus ta b verifies the n etwork conn ection b etween the s erver runn ing the W ebP AM PRO Utility Server and t he VT rak subs ystem. There are two con dition s cited u nder Connec tion Info: • Conne ction is presen t and func tional – Web P AM PRO is connec ted a[...]

Chapter 4: Management with WebPAM PRO 95 VT rak Management Lock Operations The VT rak– Lock Op eration s tab display s lock s tatus and en ables yo u to lo ck or unlo ck a sub system controlle r . The l ocking m echanis m isola tes the c ontroll er durin g mainten ance ope rations an d othe r periods w hen yo u want to avoid inter ruption from ot[...]

VTrak 15110 User Man ual 96 • Logi cal Driv e Heal th – Logic al drives under thi s control ler . • Phys ical Dr ive Health – Phys ical driv es under this con troller . • Encl osure Healt h – T emperatu re, volt age, batt ery conditio n. Func tional in dicates normal op eration. Problems are descr ibed in re d type. Click on th e Logica[...]

Chapter 4: Management with WebPAM PRO 97 Y ou can a lso perfo rm a PDM manuall y unde r Disk Array Backgroun d Activit y . SCSI Mana gement The SCSI Manag ement–In formation tab lists the SCSI Ch annels fo r this subsy stem. SC SI Managem ent appl ies to VT rak 8100, 121 00 and 15 1 10. LUN Settings The SCSI Manag ement–C onsole L UN Sett ings [...]

VTrak 15110 User Man ual 98 Y ou can s pecify additi onal SCSI TIDs as nee ded. 7. In the right col umn, select th e LUN for th e Console . 8. Repea t step s 1 and 2 for SCSI Channel 2. 9. Clic k the Submit butt on when you a re done . TID Settings The SCSI Ma nagement –TID Set tings ta b enabl es you add SCSI T arget IDs. Thi s featu re applies [...]

Chapter 4: Management with WebPAM PRO 99 S t atisti cs The SCSI Manag ement–S tati stics t ab dis plays a t ally of In put/Outpu t opera tions and amou nt of data t ran sac ti ons . Th es e fi gur e s ar e for inf or mat io nal pur pos es onl y . 1. Click th e Subs ystem icon. 2. Cli ck on the VTrak ic on. 3. Clic k on the SCS I Ma nage men t ico[...]

VTrak 15110 User Man ual 100 4. Click on the Po rt1 link or the Sett ings t ab. Settings The Ne twork Ma nagemen t–Settin gs tab enabl es you to make ne twork se ttings for VT rak's Man agement Port. T o make set tin gs: 1. Click th e Subs ystem icon. 2. Cli ck on the VTrak ic on. 3. Click on th e Network Manag ement ico n. 4. Click on the P[...]

Chapter 4: Management with WebPAM PRO 101 2. Cli ck on the VTrak ic on. 3. Click on th e Service Managem ent i con. 4. T o access SNMP s ettings, cli ck the SNMP tab or SNMP link. 5. T o acces s T elnet se ttings, c lick the T elnet t ab or T elne t link. There are no us er settings for CIM. SNMP The Se rvice Ma nagemen t–SNMP t ab en ables yo u [...]

VTrak 15110 User Man ual 102 Te l n e t The Se rvice Ma nagemen t–T elnet t ab let s you ena ble and d isable T elnet serv ice. Y ou can u se T elnet to run the VT rak Com mand Li ne Utility over a net work conn ection. T o enab le T elnet: 1. Click th e Subs ystem icon. 2. Cli ck on the VTrak ic on. 3. Click on th e Service Managem ent i con. 4.[...]

Chapter 4: Management with WebPAM PRO 103 T o set an alias for thi s controlle r or to set VT rak's date and tim e, click the Settin gs tab. T o access t he Contro ller–Inform ation t ab: 1. Click th e Subs ystem icon. 2. Cli ck on the VTrak ic on. 3. Click on th e Control lers icon. 4. Clic k on the Co ntr oll e r ic on . Control ler Par am[...]

VTrak 15110 User Man ual 104 1. Click th e Subs ystem icon. 2. Cli ck on the VTrak ic on. 3. Click on th e Control lers icon. 4. Clic k on the Co ntr oll e r ic on . 5. Clic k on the Set ti ngs ta b. 6. Enter a n alias i n the f ield. 7. Clic k the Submit butt on when you a re done . T o set date and ti me on the VT rak subsys tem: 1. Foll ow step [...]

Chapter 4: Management with WebPAM PRO 105 3. Cli ck on the Enc l osur es icon . Enc lo su re The En closure– Informa tion ta b lis ts det ailed info rmatio n on the s tat us of the encl osure for th is su bsystem . In the diag ram, the icons of functiona l compon ent s are s hown in green. Th e icons of out-of-sp ecific ation co mpone nts are als[...]

VTrak 15110 User Man ual 106 2. Cli ck on the VTrak ic on. 3. Cli ck on the Enc l osur es icon . 4. Clic k on the Enc l osur e ico n. 5. Cli ck on the F RU V PD tab. Batte ry The En closure– Battery t ab rep orts on the co ndition o f VT rak's c ache bac kup batte ry . Battery In formation displays b attery tem perature , capa city and volta[...]

Chapter 4: Management with WebPAM PRO 107 2. Cli ck on the VTrak ic on. 3. Cli ck on the Enc l osur es icon . 4. Clic k on the Enc l osur e ico n. 5. Click on the Bu zzer t ab. 6. Click the d ropdown menu on th e Buzzer t ab and se lect Se ttings. The buzz er s et ti ngs ta b a ppe ars . • Check the Ena ble box to e nable the buzze r . Uncheck th[...]

VTrak 15110 User Man ual 108 Physica l Dri ve I nform ation • Slot No – This is the Contr oller chan nel ID n umber to wh ich th is phys ical driv e is att ache d. If you h ave a drive on a channel but it does not a ppear i n W ebP AM, there is a b ad conne ction. • Physic al Drive M odel – The drive ma nufact urer's id entificati on. [...]

Chapter 4: Management with WebPAM PRO 109 5. Clic k on the Phy si cal Dr ives icon. 6. Clic k on the Phy si cal Dr ive ic on . Enclosure Front V iew The En closure Front V iew s hows the en closure locati on of the p hysica l drive. Physica l Dri ve I nform ation • Physic al Drive M odel – The drive ma nufact urer's id entificati on. • P[...]

VTrak 15110 User Man ual 110 • Serial N umber – This i s the manufa cturer's seri al number fo r this disk driv e. This feature al lows you t o obt ain the n umber for warranty or supp ort purpo ses witho ut removi ng it from the enclo sure. • Read / Write Coun t s – A record of the num ber of inp ut/output t ransac tions. • Read / W[...]

Chapter 4: Management with WebPAM PRO 111 Create a Disk Array A dis k array is a colle ction of p hysical drives i n a RAID . Logica l driv es are ma de from disk arr ays. T o acc es s the Di sk Ar ra y tab: 1. Click on the Su bsyst em ico n in T ree Vi ew . 2. Cli ck on the VTrak ic on. 3. Clic k on t he Di sk Arr ays icon . 4. Click on th e Creat[...]

VTrak 15110 User Man ual 112 Automatic Option The Di sk Array Aut omati c Creatio n option e nables y ou to cr eate a ne w disk array foll owing a default set o f p arameters . One l ogical drive will b e made automa tically when yo u cr eat e th e dis k a rr ay . When you choo se the Automatic option, the foll owing p arameters di splay: • Disk [...]

Chapter 4: Management with WebPAM PRO 113 T o create a new dis k array: 1. Ch eck the b oxes to s elect any one or com bination of the fo llowin g: • Redunda ncy – The array wil l remain avail able if a physi cal driv e fails • Cap acity – The gre atest possible amount o f dat a cap acity • Performan ce – The h ighest po ssible re ad/w [...]

VTrak 15110 User Man ual 114 •O t h e r 4. Clic k the Up date button. Or chec k the Auto matic Update box and upda tes will o ccur auto maticall y . The f ollowin g param eters display : • Disk Ar ra ys – The numbe r of phy sical d rives in the disk array , their ID num bers, conf igurab le cap acity an d the num ber of logi cal d rives to b [...]

Chapter 4: Management with WebPAM PRO 115 T o create a new dis k array: 1. Enter a name for the disk array in th e field pro vided. 2. Ch eck the b ox to enab le ini tializat ion, if desire d. If yo u check ed the initializ ation box , select the ty pe of initi alizatio n from the dropd own menu. • Quick – Erases the reserve s ectors o f the ph[...]

VTrak 15110 User Man ual 116 9. If yo u accept these p arame ters, pr oceed to the next s tep. If yo u do NOT a ccept these p arameters , review and mod ify your s electio ns in th e previou s step s. 10. When yo u are d one, cl ick the Subm it bu tton. The n ew disk a rray app ears in th e Disk Array List on the Info rmatio n ta b. Proce ed to Cre[...]

Chapter 4: Management with WebPAM PRO 117 The s elected disk array d isapp ears from t he Disk Arra y List on the Inf ormation tab. Disk Array Information The Di sk Array–I nformat ion tab give s a desc ription and report s the st atus of the phys ical dri ves and logical d rives tha t belo ng to this disk arra y . A disk a rray is a col lection [...]

VTrak 15110 User Man ual 118 • Number o f Logical Drives – The nu mber of log ical d rives tha t belon g to this disk arr ay . • Supported RAID Level – The RA ID level of this disk a rray . • Phys ical Drives in the Di sk Array • Slot No. – This is the slo t number of a physica l driv e that belongs to this dis k ar ra y . • Model ?[...]

Chapter 4: Management with WebPAM PRO 119 • Critical – This co nditio n arises as the result of a physic al drive failure . A Cri tical logic al driv e will st ill func tion and your da ta is stil l availabl e. Howev er , the l ogical d rive ha s lost re dundan cy (fault toleran ce). Y ou mu st det ermine the c ause of t he problem and corre ct[...]

VTrak 15110 User Man ual 120 Create Logical Drive When you crea te a di sk array , you auto matical ly cre ate one lo gical dri ve also. If the i nitial lo gical dri ve used l ess than the ful l cap acity of the disk array , you can crea te additio nal lo gical dri ves from the same disk arra y . T o create a logic al drive: 1. Click on the Su bsys[...]

Chapter 4: Management with WebPAM PRO 121 Delete Logical Drive The Di sk Array–D elete LD tab enable s you to delete a logica l driv e under thi s disk arr ay . T o de let e a l ogi ca l dr ive: 1. Click on the Su bsyst em ico n in T ree Vi ew . 2. Cli ck on the VTrak ic on. 3. Clic k on t he Di sk Arr ays icon . 4. Clic k on the Disk A rra y ico[...]

VTrak 15110 User Man ual 122 an a rray is c alled " expan sion" . Becaus e migrati on and exp ansio n are clo sely relat ed, the Mi gration feature handles both. No te that the availabl e t arget RAID l evels d epend on the num ber phys ical d rives in the cu rrent array a nd the n umber of fr ee physi cal drives. • Manual Re build – [...]

Chapter 4: Management with WebPAM PRO 123 The Sc heduler I nformation window a ppears. 7. Click the radio button to selec t the time interval (minut e, hour , day , week, mont h). 8. Make your s et ti ngs. • For min ute and ho ur intervals , specify the time perio d (30 to 59 minute s, 1 to 2 3 hours). • For da y , week and mo nth interv als, s[...]

VTrak 15110 User Man ual 124 • Alias – A u ser-speci fied n ame for the logic al drive. If the log ical d rive wa s crea ted at t he same t ime as i ts disk array , it will have the same alias . • RAID Level – The RAID of the logic al drive. If the l ogical d rive was creat ed at the same time as it s disk a rray , it will h ave the s ame R[...]

Chapter 4: Management with WebPAM PRO 125 2. Cli ck on the VTrak ic on. 3. Clic k on t he Di sk Arr ays icon . 4. Clic k on the Disk A rra y ico n. 5. Click on th e Logical Drives icon. 6. Clic k on a Lo gi cal Dr ive ic on . From this t ab, y ou can access the Settin gs t ab to s et an alias o r the LUN Settin gs ta b to spec ify a SC SI TID and L[...]

VTrak 15110 User Man ual 126 • Offline – This cond iti o n ar ises as the res ul t of a s econ d ph ys ic al d riv e failu re. An Of flin e logica l driv e is not a ccessa ble but so me or a ll of you r dat a ma y remain int act. Y ou m ust determ ine the cause o f the pr oblem and c orrect it. • Cap acity – Th e d ata st ora ge c apac ity [...]

Chapter 4: Management with WebPAM PRO 127 Logical Drive Alias The L ogical D rive–Sett ings t ab enable s you to specify an ali as for an i ndividu al logi cal d rive. T o sp ecif y an al ias : 1. Click on the Su bsyst em ico n in T ree Vi ew . 2. Cli ck on the VTrak ic on. 3. Clic k on t he Di sk Arr ays icon . 4. Clic k on the Disk A rra y ico [...]

VTrak 15110 User Man ual 128 The De dicated hot sp are drive o ption requ ires you to design ate an unassig ned dis k drive as the hot sp are fo r a spe cific di sk array . Th is acti on is d escribed under Create, be low . S p are Drive Li st T o see a l ist of the current dedicate d hot s pare d rives: 1. Click on the Su bsyst em ico n in T ree V[...]

Chapter 4: Management with WebPAM PRO 129 The Cr eate S pare D rives p age d isplays . 5. From the firs t dropdow n menu, select the disk array to w hich th e spa re driv e will be assi gn ed. 6. From the se cond d ropdown menu, select a n unas signed p hysical drive as the s pare d rive. Be su re the sp are d rive is of equal or greater cap acity [...]

VTrak 15110 User Man ual 130 Logical Drive Summar y Logical Drive List The L ogical D rive Sum mary is a list of all log ical driv es in th e VT rak enc losure. This function list s all o f the logi cal dri ves toge ther , without th e need to naviga te throu gh multip le disk arrays. The informati on her e is exac tly the s ame as s hown unde r th[...]

Chapter 4: Management with WebPAM PRO 131 • Critical – Thi s condition arises as the result of a physic al drive failu re. A Cri tical log ical dr ive wi ll still function and yo ur dat a is st ill avail able. Howe ver , the logi cal driv e has lost redun dancy (fault tol erance) . Y ou must de termin e the cau se of the p roblem an d correct i[...]

VTrak 15110 User Man ual 132 • Opera tional S t atus – T he operati ng condit ion of a logical drive . • OK / F unctional – This is t he no r mal stat e of a lo gi cal dri ve . Wh en a logi cal drive is OK / Functio nal, it is ready for imme diate use . For RAID Leve ls other t han RAID 0 (S triping), the lo gical dri ve has fu ll redun dan[...]

133 Chapter 5: Manageme nt with the CL U VT rak S tatus Indicators Even though the Comma nd Line U tility o ffe rs compr ehens ive moni toring of VT rak, the LED in dicators on the VT rak unit pro vide im port ant st atus in formation. When the powe r is switc hed on, th e LEDs o n the front o f the VT rak will light up. Figure 1. VTrak 151 10 Fron[...]

VTrak 15110 User Man ual 134 . See p age 189for more infor mation ab out fie ld-replace able com ponent s. See p age 234 fo r a discuss ion of cri tical and of fline logical d rives. Dri ve Statu s Ind i ca tor s The re a re t wo LEDs on each Dr iv e C arri er . T hey r e por t th e pr es enc e of po we r and a disk dri ve, and t he curre nt condit[...]

Chapter 5: Management with t he CLU 135 The VT rak spins up the disk drives s equentia lly in ord er to equal ize p ower draw durin g start -up. Af ter a f ew moment s the L EDs will display as desc ribed i n the ta ble be low . See p age 234 fo r a discuss ion of reb uildin g and fail ed disk drives. LEDs St a te Dark S teady Green Fl ashi n g Gre[...]

VTrak 15110 User Man ual 136 Audible Alar m VT rak’ s audibl e alarm (b uzze r) has three sound pattern s: • Beep. Beep. Be ep. – Indic ates that a logi cal d rive is re building • Beep-b eep, b eep-beep, b eep-be ep. – Indi cates that a log ical d rive is c ritica l • Beep-b eep-be ep. Beep-be ep-beep. – Indica tes a prob lem wi th a[...]

Chapter 5: Management with t he CLU 137 CLU Connection There are two con nectio ns metho ds for the CLU: • Serial – Requi res a nul l mod em cable (include d with VT rak) t o connec t the seria l por ts on the Ho st P C and V T ra k • T elnet – R equires a network connec tion betw een the H ost PC and VT rak’s Man agement Po rt. Serial Co[...]

VTrak 15110 User Man ual 138 There are nine f unctional group s in th e CLU: Subsys tem Manag ement – Allows you view c ontroller informatio n, change p arameters , monitor t he enclos ure, upda te the firm ware and reboot the VT rak. Physic al Drive Managem ent – Enab les you to view di sk drive a ssig nments and p arameters , wipe boot a nd r[...]

Chapter 5: Management with t he CLU 139 Maintena nce – Enabl e or disa ble the Maintena nce Activ ity Mon itor and Media Patrol ; migrate L ogical D rives; man ually reb uild, synchron ize, run PDM and Redun dancy Check on Logic al Driv es. Event V iewer – V iew th e event l og. Buzzer – Enable, disable or sile nce the b uzzer (aud ible ala r[...]

VTrak 15110 User Man ual 140 How to use the C LU All d irections begin at the CLU Main Menu . From t hat point, the ke ystrokes are lis ted to t ake y ou to the a ppropria te subme nu. Depe nding on your VT rak m odel, some functi ons requ ire yo u to sp ecify a Port, Disk Array or L ogical Dr ive b y its ID num ber . For ex ample: Hot S par e Po l[...]

Chapter 5: Management with t he CLU 141 Aut o Re buil din g: On Ho t Sp are P olic y: Global P riority: H igh(RBLD), High(S YNC), Hi gh(Migr ation), High(RC) , High( PDM) -------- ---------- ------ ---------- ------ ---------- ----------- ----- -------- Disk Arr ay 1 Pro perties 1. Create Log ical Drive 2. Delete Logical Drive 3. Cac he P olic y 4.[...]

VTrak 15110 User Man ual 142 11 ST380013A S 80 GB 12 WDC WD1200JD-00F Y B0 120 GB Enter P hysical Drive ID to select. Press R to co ntinue after you ha ve finishe d sele cting Phy sic al Dri ve . Yo u r i n p u t ? > r 8. Pres s R to fin ish your selectio n and press Enter . The Di sk Array Prop erties su bmenu display s. Note that Hot S pare Po[...]

Chapter 5: Management with t he CLU 143 A Auto Re building , Disk Array – M ain Menu, 3 Enter , 4 Enter Auto S tart, PDM – Main Men u, 3 Enter B Back Pla ne Box – M ain Menu , 1 Enter , 1 Enter , 4 Enter Battery – Main Me nu, 1 Enter , 2 Enter Battery Board – M ain Menu , 1 Enter , 1 Enter , 4 Enter Boot Se ctor , Wipe – Main M enu, 2 E[...]

VTrak 15110 User Man ual 144 Name – Main M enu, 3 Ente r , 4 Ente r Propert ies, Modify – Main Men u, 3 Enter , 4 Enter PDM Aut o S tart – M ain Menu , 3 Enter PDM, m anual – M ain Menu , 7 Enter Priorit y – Main Me nu, 3 En ter , 4 Enter Rebui ld, ma nual – Ma in Me nu, 7 En ter Redun dancy Check – M ain Men u, 7 Enter Retry Co unt ?[...]

Chapter 5: Management with t he CLU 145 Name – Main M enu, 4 Enter SCSI LUN – Main Menu, 4 Ent er Logi cal Driv es, Di splay – M ain Men u, 4 Ent er LUN RAID Console – Main Men u, 6 Enter Logi cal Driv e – Main Menu , 4 Enter M Man agement, Co ntrolle r – Main M enu, 1 Ent er Man agement Port – Main Men u, 5 Enter DHCP – Main Me nu,[...]

VTrak 15110 User Man ual 146 Write C ach e – Ma in Me nu, 2 En ter Phys ical Dr ives, D isplay – Main Me nu, 2 En ter Ping, Managem ent Port – Main Menu , 5 Ente r Power Su pply – M ain Menu, 1 Enter , 1 Enter , 4 Enter Priorit y , Disk Array – Mai n Menu, 3 Ent er , 4 Enter Propert ies, Disk Array – Ma in Men u, 3 Ent er R RAID C onsol[...]

Chapter 5: Management with t he CLU 147 Subs ystem M anagemen t – Ma in Menu Synchro nize Di sk Array – Main Menu, 7 En ter T T elnet – M ain Menu , 5 Enter Pass word – Main Menu, 5 Enter , 2 Enter Enabl e/Disable – Main M enu, 5 Ente r , 2 Enter T imeout – Main Menu , 5 Ente r , 2 Enter User Name – Main M enu, 5 Ente r , 2 Enter T em[...]

VTrak 15110 User Man ual 148 Controller Man ageme nt 1. From the Main menu, pres s 1 and Ent e r , then 1 an d Enter agai n to ac cess Control ler Ma nagemen t. 2. Press the numb er of the op tion you want plu s Enter to m ove to th e next submen u. • V iew Controller I nformation – Serial an d revisio n numbers, IP add res ses, cach e si ze ?[...]

Chapter 5: Management with t he CLU 149 Co ntroller Lab el: alias Date: 1-17-2005 T ime: 1:15:04 ---------- ---------- ------ ---------- ------ ---------- ----------- ----- ------ Modify Controller P a r ameters 1 . Co ntr oll er L abe l 2. Date and T i me R. Return to Previous Menu Plea se enter y our menu c hoice> Press 1 and Enter t o assign [...]

VTrak 15110 User Man ual 150 WA RN I N G R eboot VT ra k 15110 n ow(y/n)?> y Please confirm again , reboot VT rak 15110 now(y /n)?> y 2. Pres s Y and En ter to confi rm. 3. Pres s Y and En ter to confi rm aga in. The VT rak will reboot. Y ou ca n watch the progres s in the T erminal w indow .[...]

Chapter 5: Management with t he CLU 151 Enclosure Management From the Main menu, pres s 1 and Ent e r then 2 a nd Enter to ac cess Enc losur e Man agement. S elect the com pone nt whose performan ce yo u want to check. Fan S peed From the Enclos ure Mana gement m enu, pre ss 1 and Enter to ac ce ss Fa n S peed. ************* ***F an Speed**********[...]

VTrak 15110 User Man ual 152 5. Pres s Y and En ter to co nfirm you r choi ce. If yo u disabl ed the buzzer , repea t the sam e procedu re enab le it agai n. T emperature From the Enclos ure Mana gement m enu, pre ss 3 and Enter to ac ce ss T emperature . ***************** ****T empera ture*************** ***** T emper ature # Ce lsius F ahrenheit [...]

Chapter 5: Management with t he CLU 153 ************* **Battery************** Battery Information: V oltag e: 4.13 volts Capacity : 3841 mAH T emper ature: 29 Celsius (84 F ahrenheit) Press Enter key to return A batt ery is su pplied with VT rak to po wer the c ache in t he event of a po wer fail ure. When fu lly char ged, the battery c an suppl y [...]

VTrak 15110 User Man ual 154 Physical D rive Management The t erm Physical Driv e refer s to a Hard D isk D rive, as comp ared to a Lo gical Drive tha t is made up of one or more ph ysical or disk drives. This man ual uses the te rms phys ical dri ve and di sk drive interchan geabl y . From the Main Menu, pres s 2 and Ent e r to acce ss Phys ical D[...]

Chapter 5: Management with t he CLU 155 If yo u know a disk dr ive is go od but VT rak s hows an Error , wipe the drive ’s rese rve secto r . From the Physica l Drive Managem ent menu, press 7 and Enter . If VT rak do es not rec ognize a disk dri ve, chec k for p roper inst all ation into the driv e carrier an d verify that the carrier is proper [...]

VTrak 15110 User Man ual 156 Wipe Out Boot Sector When a disk d rive i s boot able, it cont ains a bo ot sect or . In some cases, a boot sect or is und esireable when th e disk d rive is used in a logica l driv e. This fe ature eras es the boo t sector f rom the disk drive. 1. Pres s 3 and Enter to wip e the boo t sect or from the selec ted disk dr[...]

Chapter 5: Management with t he CLU 157 Blink LED This function causes the Disk S ta tus LED for th e specif ied dis k drive to blin k (right). This ac tion help s you quic kly id entify the d isk driv e you are working on. 1. Pres s 5 and Enter to acce ss Blin k LED . 2. T ype the ID n umber of t he dis k drive wh ose LED you want to blink and pre[...]

VTrak 15110 User Man ual 158 4. Pres s Enter to return to the Phy sical Drive Manag ement me nu. 5. Pres s 6 and Enter to agai n acces s Diagn ostics. The res ults o f th e te st ar e di s play ed. Brief testing status for free P hysical Drives: ID Self T est Rema ppin g ---------- ---------- ------ ---------- ------ ---------- ----------- ----- --[...]

Chapter 5: Management with t he CLU 159 ID Name Read Count Read TRANS W rite Count Write TRANS ---------- ---------- ------ ---------- ----------- ----- ----------- ----- ----------- ----------- ----- ------ 1 ST316 0023AS 5244 34 251 6 KB 10 485 76 1066 KB 2 WDC WD12 00 JD 6253 06 3146 KB 34975 25 2443 KB 3 Maxtor 6 Y080M0 3219 86 1743 KB 27528 76[...]

VTrak 15110 User Man ual 160 Disk Array Management From th e Mai n Menu , pr ess 3 and Ente r to acces s Disk Arra y Manage ment. T his are dea ls w ith disk ar ra ys an d lo gi cal dri ve s tha t yo u cr eat e, i n c ont ras t to phys ical dri ves whic h are c overed und er a sep arate menu. PDM Auto Start option: Enabled ID Name RAID SBS CAP Me m[...]

Chapter 5: Management with t he CLU 161 • RC x% – Red undanc y Check . The l ogical d rive i s checking dat a to veri fy tha t redun dancy or p arity m atch. Unlike Synchroniz ing, no correc tions ar e made. The l ogical d rive i s availa ble • MP x% – Media Pa trol. T he logic al drive is chec king di sk drive s to veri fy the cond ition o[...]

VTrak 15110 User Man ual 162 SMAR T chec k: enabled I nit iali zat ion : fu ll Crea te Logical Drive now (y/n)?> y 4. If y ou ag re e wi t h th e spe ci fic at io ns , pr ess Y and Enter . If y ou di s agr ee, pre ss N an d Enter . Th en se lec t Crea te New Disk Array (belo w) and i nput your o wn sett ings. This comp let es d isk ar ray cr eat[...]

Chapter 5: Management with t he CLU 163 *3 WDC WD2000JB-00FUA0 200 GB *4 WDC WD2000JB-00FUA0 200 GB *7 ST380013AS 80 GB *9 WDC WD1200JD-00FYB0 120 GB 11 ST380013AS 80 GB 12 WDC WD1200JD-00FYB0 120 GB 4 Phys ica l Dr ives ha ve been sel ect ed. Enter Physical Drive ids and/or id ranges separ ated by commas. F or example: 1,5,8-15. Press R to continu[...]

VTrak 15110 User Man ual 164 7. Revie w the li st. If you agree with t he lis t, press Y and Enter . If you di sagree with th e list, pr ess N and Enter , then select C reate New Disk Array again. If yo u click ed Y , the new d isk array appears. ID Name RAID SBS CAP Member PDs Status ---------- ---------- ------ ---------- ------ ---------- ------[...]

Chapter 5: Management with t he CLU 165 2. Delete Logical Drive 3. Cac he P olic y 4. Retry Count 5. Enab le/Disab le SMART 6. Name 7. P r i o r i t y 8. Hot Spare 9. Auto Rebu ilding R. Re turn to Previous Menu Plea se enter y o ur me nu choice> 8 Create Logical Drive A lo gic al dri ve is an ent i ty ma de fro m a di s k arr ay t h at yo ur PC[...]

VTrak 15110 User Man ual 166 Disk Array #1 Mappin g: ---------- ---------- ---- | LD #1 | Free | | 100 GB | 257 GB | ---------- ---------- ----- 6. Pres s R and En ter twice to return to the Main men u. In ord er to use t his logi cal dri ve to read and wri te data , you m ust p artition an d forma t it usin g the Hos t PC’ s operati ng syste m. [...]

Chapter 5: Management with t he CLU 167 1. From the Disk Array Manag ement menu, pres s 4 and Ent e r to acce ss the Disk Array Properti es. 2. Pres s 3 and Enter to acce ss Cac h e Po licy . 3. Pres s Y and En ter to co nfirm. The new policy d isplays . 4. Pres s Enter to return to the Dis k Array Prope rties men u. Retry Count Use th is feature t[...]

VTrak 15110 User Man ual 168 • Re dundancy Check •P D M A hig h priority means m ore syste m reso urces are allocate d to the R ebuild, Synchro nize, Mig rate, Red undan cy Check and PDM function and less to rout ine read/ write ac tivity . As a result, th e functio n in progre ss goes faster b ut the dis k array takes lo nger fo r reads and wr[...]

Chapter 5: Management with t he CLU 169 11 ST380013AS 80 GB 12 WDC WD1200JD-00FYB0 120 GB Enter P hysical Drive ID to select. Press R to co ntinue after you ha ve finishe d sele cting Phy sic al Dri ve . Yo u r i n p u t ? > 9 3. If yo u change to a Ded icated ho t spare drive, type the ID numb er of one avai lable ph ysic al drive a nd pres s E[...]

VTrak 15110 User Man ual 170 This action a nticip ates and preve nts a disk drive fai lure and re sulti ng Criti cal S tat us. The lo gical dri ve is av ailable at all times. T o perform PDM manuall y , see p age 185. 1. Pres s 5 and Enter to acces s the PDM Auto S tar t Option. PDM Auto Start: Disabled Enab le PD M Aut o star t(y/ n)?>y 2. Pres[...]

Chapter 5: Management with t he CLU 171 9. T ype an erro r number a nd press Enter . 10. P res s Enter to return to the PDM T hreshold subm enu.[...]

VTrak 15110 User Man ual 172 Logical D rive Man agement Logi cal dr ives are created un der the Disk Arra y Managmen t, Disk Array Propert ies func tion. Th is functi on enabl es you c an spe cify nam es and m ake SCSI as signment s to exis ting l ogical d rives. Name 1. From the Main menu, pres s 4 and Ent e r , then press 1 and Enter to acce ss L[...]

Chapter 5: Management with t he CLU 173 Network Management From the Main Menu, pres s 5 and Ent e r to acce ss Netwo rk Ma nagement. The Netw ork Ma nagement menu displa ys with the factory de fault set tings show n abov e it. Network Par ameters: DH CP : En ab le d T elnet: Ena bled T FTP Server IP Address: 192.168.10.5 SNMP Na me: pri ti SNMP Lo [...]

VTrak 15110 User Man ual 174 Gate way IP Addr ess: 10.0.0 .3 ---------- ---------- ------ ---------- ------ ---------- ----------- ----- ----- Management P ort 1. DHCP 2. M anag eme nt Port IP 3. Subnet Mask 4. Ga te way R. R eturn to Previous M enu Plea se enter y our menu c hoice> 1 2. Pres s 2 and Enter to sele ct Ma nagement Port IP . ------[...]

Chapter 5: Management with t he CLU 175 2. Timeout 3. Ch ang e User Name 4. Change Passwo rd 5. Reset to Def ault Settings R. R eturn to Previous M enu 2. Pres s 1 and Enter to acc ess enab le/disab le T elnet . Enabl e T elnet(y/n)?> y 3. T ype Y and E nter co nfirm. Y ou ret urn to the T elnet Setti ngs men u. Ti m e o ut 1. Pres s 2 and Enter[...]

VTrak 15110 User Man ual 176 2. T ype the ne w pass word and press Ente r . 3. T ype the ne w pass word and press Ente r again to confirm . Pass word chang ed succe ssfully Pres s En ter key t o re tu rn 4. Pres s Enter to return to the T elne t Settings menu. Reset to Default Sett ings This action wi ll del ete any T elnet set tings changes you pr[...]

Chapter 5: Management with t he CLU 177 Curr ent SNMP Sys tem Inf ormat ion: Name: Sono ma Loca tion: Promis e Conta ct per son: sa les Read only co mmu nity: public IP add resse s of trap sin ks : #1: 192.168.1.22 ---------- ---------- ------ ---------- SNMP Settings 1. Name 2. Location 3. Contact P erson 4. Re ad only Community 5. T rap o nly Co [...]

VTrak 15110 User Man ual 178 T rap O nly Community 1. Pres s 5 and Enter to ac cess the SNMP trap only com munity setting. Enter the trap only community> Engin eering 2. T ype the ne w trap on ly co mmunity and pr ess Enter . Y ou return to the SNM P Settings menu. Tr a p S i n k s 1. Pres s 6 and Enter to acces s the SNMP tra p sink IP add ress[...]

Chapter 5: Management with t he CLU 179 2. T ype the IP a ddress o f the ne twork no de you w hich to c ontac t and pres s Enter . Number o f ping pack ets(1-30)?> 5 3. T ype the nu mber o f ping p acket s yo u with t o send an d press Ente r . --- 192.168.10.239 ping s tatistics -- - 5 packet s transmitted, 5 rece ived, 0% loss, time 4008ms rtt[...]

VTrak 15110 User Man ual 180 SCSI Mana gement • Chann el TID (be low) • RAID Co nsole LU N (p age 181) From the Main Menu, pres s 6 and Ent e r to acce ss SCSI Man ageme nt. SCSI Channel 1, Initiator 7 , TID 0 T ransfer Speed: 160 Mb/s Channel 1 IO Statistics: read coun t 524434, r ead tr ansaction 240 Mb Channel 1 IO Statistics: write count 52[...]

Chapter 5: Management with t he CLU 181 TIDs f or SCSI channel 1 changed Press Enter key to return ************* **Modify SCS I Channel T ID************** SC SI C ha nne l # TIDs ----- ----------- ----- ----------- ---- 11 3 5 7 9 11 ----- ----------- ----- ----------- ---- 20 Plea se sel ect th e SCSI chan nel( 1-2) Press R to return after finishe[...]

VTrak 15110 User Man ual 182 Maintenance Menu (Disk Array Operations) From the Main Menu, pres s 6 and Ent e r to acce ss the M aintenanc e menu: Maintenance activity Monitor: R unning ID Nam e RAID SBS CAP Operation Progress ---------- ---------- ------ ---------- ------ ---------- ----------- ----- ----- 1 LogDrv1 5 64K 239GB RBLD 27% on 9 2 LogD[...]

Chapter 5: Management with t he CLU 183 Maint enance Ac tivity Monitor The M aintenan ce Act ivity Mo nitor disp lays the progres s of vari ous disk a rray opera tions on the CLU screen approx imately e very 15 second s, as show n below . Daniels Arra y(DA #1) PDM(4->11) 10% Daniels Arra y(DA #1) PDM(4->11) 11% Daniels Array (DA #1) PDM(4->[...]

VTrak 15110 User Man ual 184 8 ST3160023A S159 GB *9 ST3160023A S159 GB 2 Physical Driv e s have been selected. Enter Physical Drive ids and/or id ranges separated by co mmas. Fo r exa mple : 1,5,8 -15. Press R to conti nue after you have finished select ing Physica l Drives. Yo u r i n p u t ? > r 4. Pres s R and En ter when y ou are fin ished [...]

Chapter 5: Management with t he CLU 185 Av aila ble free Physi cal D rive(s) : 1 2 7 Choo se th e free Phy sical Drive for reb uildi ng> 2 Re bu ild Disk Arra y 1 on P hysical Drive 2 now(y/n)?> y 3. Choos e the I D number of a free p hysical drive to rebuild yo ur log ical driv e and p ress Enter . Press Y and En ter to co nfirm. The Sc reen[...]

VTrak 15110 User Man ual 186 ************* *PDM for Disk Array******** ****** Id Disk Arra y Name Mode Size ------------------- -------------------------------------------- 1 Danie ls RAID5 237 GB PDM fo r Logical Drive s tarted Pres s En ter key t o re tu rn 6. Pres s Enter to return to the Ma intena nce menu . If the Maintena nce Activ ity Mon it[...]

Chapter 5: Management with t he CLU 187 If the logical drive was Fun ctional wh en the Redunda ncy Ch eck bega n, you can pause and re sume the Redunda ncy Ch eck p rocess wi th this same func tion. If the Maintena nce Activ ity Mon itor is ena bled, you can watch th e Redun dancy Check pro gress on your m onitor . Media Pa trol Use th is functi on[...]

VTrak 15110 User Man ual 188 Event V iewer Use th is functi on to r eview a ll event s in th e even t queue. Th is inform ation is espe cially help ful for tro ubleshoo ting. Th e most re cent 1024 event s will dis play . There is no del ete even t function . 1. From the Main menu, pres s 8 and Ent e r to acce ss the Ev ent V iewer . VT ra k 15110 [...]

189 Chapter 6: Maintenance • Firm ware Updat e (p age 19 0) • Repla ce Power Supply (pa ge 196) • Repla ce Cool ing Uni t Fan (p age 197) • Repla ce Cac he Battery (p age 202) • Repla ce SEP (page 204 ) • Repla ce RAID Control ler (pag e 205) This Chapter co vers th e mainte nance pro cedures fo r VT rak. The p ower sup plies, cool ing [...]

VTrak 15110 User Man ual 190 Firmware Update – WebP AM This is the pr eferred f irmware update me thod fo r most app lication s. Thi s proc edure t akes a bout te n minute s. There are altern ative me thods bas ed on the CLU (page 1 92) and a s erial port conne ction (p age 1 94). Prep aration In ord er for the fi rmware upda te to work, t hree t[...]

Chapter 6: Ma intenance 191 Firmware Ima ge File Y ou mus t obtai n the lates t firmw are update file from t he Promis e T echology websi te and save it t o the d irector y on the TF TP server y ou sp ecified a bove. 1. Point your br owser to the Promise w ebsite (www .promise. com). 2. Click on the Su pport m enu and s elect Download . 3. From the[...]

VTrak 15110 User Man ual 192 Firmware Update – CLU Use thi s firmware update meth od over a T elnet conn ection . This proce dure t akes abou t 10 minu tes. See a lso the pre ferred met hod bas ed on W ebP AM PRO ( page 1 90) and the alter native m ethod that uses a s erial port c onnecti on (pag e 194). Prep aration In ord er for the fi rmware u[...]

Chapter 6: Ma intenance 193 3. T ype the fi le name o f the fi rmware ima ge file and pres s Enter . The CL U displ ays the T FTP server I P address. 4. Pres s Y and En ter to proce ed with t he firmware update . TFTP Server: 192.16 8.10.5, updating started, please w ait... ImgHeader read: Success PTIF: S uc cess Please note that the new firm ware [...]

VTrak 15110 User Man ual 194 Firmw are Update – Se rial Po rt Use th is firmw are updat e method only wh en your Managem ent Port ha s no network connec tion or the RS-232 c onnectio n is requi red. Thi s proced ure tak es abou t 30 minu tes and ap plies to all VT rak mod els. See a lso the pre ferred met hod bas ed on W ebP AM PRO ( page 1 90) a[...]

Chapter 6: Ma intenance 195 5. W atch the terminal screen fo r the follo wing: Scrub DD R, w aiting Platform Init D one. + 6. At th e + , press the Ctrl and F keys at the same time. The p rompt cha nges to >B SP . 7. At BSP> type load -r -v -b 0x01008 000 -m y . Doubl e-check your en try . Then press Enter . This comman d readi es VT rak to r[...]

VTrak 15110 User Man ual 196 Replace Power Supply The p ower sup ply and its fan are rep laced as one unit. There a re no i ndividua lly servic eable p art s. No to ols are req uired for th is proce dure. T o remove the po wer supp ly , do the f ollowin g: 1. V erify that the p ower su pply LE D is ambe r or red. 2. Switch of f the pow er . 3. Unpl[...]

Chapter 6: Ma intenance 197 Replace Cooling Unit Fan The blowe rs (scroll fans) in the cooli ng units are repl aced as ind ividual p arts. There are two f ans in ea ch co oling uni t. No too ls are requ ired fo r this proc edure. T o replace a fan, do the fol lowing: 1. V erify that the F an LED is amber or red and note whethe r it is Fan 1 or 2 (a[...]

VTrak 15110 User Man ual 198 3. Pull the cooli ng uni t out of the VT rak enclos ure. An exa mple of a VT rak cool ing unit appears be low . T o open the cool ing unit, do the f ollowin g: 4. If the re is a ba ttery on th e cool ing unit, disconne ct the ba ttery conn ector (above). Disc onnect the b attery (if pr esen t ) Loose n the th umbs cre w[...]

Chapter 6: Ma intenance 199 5. Loos en the thu mbscrew ( above). A re tainer keep s the th umbscre w in pla ce. 6. Gras p the top and bo ttom sec tions of th e coolin g unit with yo ur hands a s shown above. 7. Hold t he lower section and pull the upper s ectio n to the rig ht.[...]

VTrak 15110 User Man ual 200 8. Sepa rate t he c ool ing unit s ec tio n t o ac ce ss t he b low er s. The up per fan is Fan 1, the lo wer fan is F an 2. From the L EDs on the coolin g unit (see the diagra m on p age 19 7), you kn ow which fan to rep lace. 9. Lif t the fan of f the moun ting pi ns and d etach the ele ctrical con nector . 10. Attac [...]

Chapter 6: Ma intenance 201 Be su re you se t the fan o n the m ounting p ins, as s hown abov e. Be su re the fans point outward, towards the handle (a bove). 1 1. Plac e the top s ectio n of the co oling unit onto t he bott om secti on and slide th e top l ock it in place. 12. T ighte n the thum bscrew . 13. If there i s a battery on the c ooling [...]

VTrak 15110 User Man ual 202 Replace Cache Battery The c ache bat tery is lo cated in the Cool ing Uni t 1 (the left on e). The battery is repla ced as an i ndivi dual p art. No to ols are req uired for th is proced ure. Note th at the Battery LE D on Cool ing Uni t 2 is alw ays da rk. T o replace a cache battery , do the fol lowing:. 1. V erify th[...]

Chapter 6: Ma intenance 203 3. Pull the cooli ng uni t out of the VT rak enclos ure. 4. Det ach the c onnector and lif t the batte ry out of the brac ket (abov e). 5. Plac e a new b attery int o the b racket and att ach the c onnector . 6. Careful ly sl ide the c ooling un it into the encl osure. 7. Gent ly press th e handl e in and upward u ntil i[...]

VTrak 15110 User Man ual 204 Replace SEP The S torage Enc losure Proces sor (SEP) man ages the fan s, audibl e alarm an d batte ry , and mon itors syste m volt ages and cooling function s. No too ls are requi red for this proce dure. T o remove and rep lace the SEP , do the followi ng: 1. Power down the VT rak. 2. Gras p the han dle an d pull it t [...]

Chapter 6: Ma intenance 205 Replace RAID Controller The RA ID Contro ller moni tors and m anages the log ical driv es. When this cont roller is replac ed, all of your logi ca l drive da ta a nd config uratio ns rem ain int act bec ause this logi cal drive informati on is st ored on the disk drives. T o remove and rep lace the RAID Con troller , do [...]

VTrak 15110 User Man ual 206[...]

207 Chapter 7: T ec hnolog y Backgrou nd • I ntr odu cti on t o RA ID ( bel ow ) • Choos ing a RAID Level (pa ge 214) • Cho o sin g S t ri pe Blo ck S ize (pag e 217) • Gig abyte Boundar y (page 21 7) • Initi alizatio n (page 217) • Hot S pare D ri ve( s) ( page 2 18) • Partiti on and Format the Logic al Drive (p age 218) • Cache Se[...]

VTrak 15110 User Man ual 208 RAID 0 – Stri p ing When a disk a rray is s triped, the read an d write b locks o f dat a are inte rleave d betwee n the s ectors o f multiple disk drives. Performanc e is i ncreased , since th e worklo ad is ba lance d between d rives or “membe rs” that form the disk array . Ident ical driv es are rec ommende d f[...]

Chapter 7: Tec hnology B ackground 209 RAID 1 – Mirroring When a disk a rray is mirrore d, ide ntical da ta is written to a pai r of dis k drives, while reads are perform ed in p a ralle l. The reads are p erforme d using e levat or seek an d load b alancing techn iques where the workl oad is dist ributed in the most ef ficient m anner . Whiche v[...]

VTrak 15110 User Man ual 210 RAID 3 – Block Striping with Dedicated Parity RAID l evel 3 o rganiz es dat a across the disk drives o f the di sk array , and sto res p arity info rmatio n on to a d isk dr ive dedi cated to this pu rpose. Thi s organ ization allo ws inc reased pe rforman ce by ac cessing multi ple disk drives s imult aneou sly for e[...]

Chapter 7: Tec hnology B ackground 211 RAID 5 – Block Striping with Dis tributed Parity RAID 5 is similar to RAID 3 as des cribed ab ove exc ept that th e parity dat a is dis tributed ac ross the disk driv es along with the da ta blocks. In each cas e, the p arity dat a is stored on a dif ferent disk th an its correspo nding data b lock. RAID 5 m[...]

VTrak 15110 User Man ual 212 RAID 10 – Mirroring / Striping Mirro ring/S triping comb ines both of the RAID 0 and RAID 1 disk array types. It can increase performan ce by rea ding a nd writi ng dat a in paral lel whi le protec ting dat a with duplicat ion. At lea st four dis k drives are neede d for RAID 10 to be inst alled . With a fo ur-disk- d[...]

Chapter 7: Tec hnology B ackground 213 RAID 50 – S triping of Distributed Parity RAID 5 0 combi nes both RA ID 5 a nd RAID 0 fe atures . Dat a is strip ed across disks as in RAID 0 , and it u ses distrib uted p arity as i n RAID 5. RA ID 50 provi des dat a relia bility , good overall perf ormance an d suppo rts larg er volum e sizes. RAID 50 al s[...]

VTrak 15110 User Man ual 214 Choosing a RAID Level There are seve ral iss ues to c onsider wh en cho osing the RAID L evel for y our VT rak disk a rray . The following discuss ion sum marizes some ad vant ages, dis advant ages and appli cation s for e ach choi ce. RAID 0 Recom mended Applicati ons for R AID 0 •I m a g e E d i t i n g • Pre-Pres[...]

Chapter 7: Tec hnology B ackground 215 RAID 3 Recom mended Applicati ons for R AID 3 • Image Ed iting • Prepres s Applic ations • Any a pplicati on requ iring high throug hput RAID 5 Recom mended Applicati ons for R AID 5 RAID 10 Recom mended Applicati ons fo r RAID 10 • Imag ing appli catio ns • Da taba se ser vers • General fileserv e[...]

VTrak 15110 User Man ual 216 RAID 50 Recom mended Applicati ons fo r RAID 50 • F ile a n d Ap pli ca tio n ser v ers • T ransact ion proce ssing • Of fice ap plica tion wi th many u sers a ccessi ng small files Advantages Disadva nt ages High R ead dat a transac tion ra te Mediu m Wr ite dat a tran saction rate Good aggregate t ransfer rate H[...]

Chapter 7: Tec hnology B ackground 217 Choosing Stripe Block Size The s tripe bloc k size value c an be set to 4KB, 8KB, 16 KB, 32KB, a nd 64KB. 64 KB is the defau lt. This se lection w ill dire ctly af fect performanc e. There are two iss ues to co nsider when sele cting the st ripe bloc k size. • Choos e a stri pe block size equ al to or small [...]

VTrak 15110 User Man ual 218 Hot Spare Drive( s) A hot spare i s a di sk drive tha t is con nected to the dis k array s ystem but i s not assign ed as a member of the disk array . In the event of the failure of a drive within a functio ning faul t tolera nt disk array , the ho t sp are is ac tivated a s a membe r of the disk array to replac e a dri[...]

Chapter 7: Tec hnology B ackground 219 Cache Settings There is a dat a ca che on th e VT rak control ler and an other on e on each Physica l disk dri ve . A cach e hol d s data in vo la til e m emo ry du ri ng RAI D ma na geme nt and dat a tran sfer activ ity . The right co mbina tion of cache s ettings fo r your n eeds can imp rove VT rak’ s ef [...]

VTrak 15110 User Man ual 220 Dif ferent types of disk arrays us e diff erent org anizatio nal m odels an d have varying benef its. The foll owing ou tline brea ks do wn the pr operties f or each type of RAID supporte d by Promise product s. From T o Increase Redundanc y Cap a city Pe rformance Add Lo se RAID 50 R AID 10 • RAID 3/5 • RAID 0 • [...]

Chapter 7: Tec hnology B ackground 221 . Ranges of Disk Array Expansion There are limi tation s to how larg e you can ex pa nd a disk arra y , dependin g on the size of yo ur curr ent disk arr ay . The c urrent SCSI an d Fibre Channel H BA cards and PC Operat ing Sys tems supp ort a 10-by te LBA fo rmat. This means t hat a d isk array can have up t[...]

VTrak 15110 User Man ual 222 Y ou can d irect WebP AM PRO o r the CLU to exp and a di sk arr ay beyon d the maxim um exp ansion size . However , when exp ansion is finis hed, you r disk array will b e the m aximum size li sted in t he table. If yo u require a disk array larg er than the maxi mum exp ansion siz e: 1. Back up the dat a from the curre[...]

223 Chapter 8: T rou bleshoo ting • V T rak is Bee pin g ( bel ow ) • CLU Repo rts a Proble m (below) • W ebP AM PRO R eports a Problem (p age 224 ) • LEDs D isplay Am ber or Red (page 226) • Even t Notificati on Response (p age 230) • Critic al & Of fline Dis k Arrays (p age 23 4) • Encl osure Pr oblems (p age 235) • Conne ctio[...]

VTrak 15110 User Man ual 224 In the exampl e above, d isk array “Arra y2” is cri tical. See “Critical & Offli ne Disk Arrays” on page 234 . W ebP AM PRO Repor ts a Problem W ebP AM ai ds in troub lesho oting you r logic al drives and en closure b y cont inuous mon itoring and reporti ng to the U ser in t he foll owing wa ys: • Displ a[...]

Chapter 8: Troubleshoo ting 225 • Displ ays full inform ation on the selec ted comp onent the Manag ement Wind ow (above) Click these l inks to see sp ecific tro ubles hooting to pics: • “Even t Notificati on Res ponse” on pag e 230 • “Critic al & Of fline Disk Arrays” o n page 234 • “Fr equent ly Asked Ques tions” on pag e [...]

VTrak 15110 User Man ual 226 LEDs Display Amber or Red Front Panel When the powe r is switc hed on, th e LEDs o n the front o f the VT rak will light up. Figure 4. VTrak 151 10 Fron t Panel L EDs When boot-up is finishe d and t he VT rak is fun ctioni ng normal ly: • Control ler LED bl inks gree n once per secon d for five sec onds, g oes dark f [...]

Chapter 8: Troubleshoo ting 227 See p age 189 fo r more info rmatio n about fie ld-replac eable compone nts . See p age 234 fo r a discuss ion of cri tical and of fline logical d rives. LEDs St a te Dark S teady Green Fl ashi n g Green Ambe r Red Power System O ff Normal n/a n/a n/a FRU* System O ff Normal n/a Fan or Battery Problem Fan o r Battery[...]

VTrak 15110 User Man ual 228 Drive S t atus Indica tors The re a re t wo LEDs on each Dr iv e C arri er . T hey r e por t th e pr es enc e of po we r and a disk dri ve, and t he curre nt condit ion of the drive. Figure 5. VT rak Drive Carri er LEDs. Under norm al conditi ons, the Power /Activi ty and Disk S tatus LEDs shou ld display green . See ?[...]

Chapter 8: Troubleshoo ting 229 Back of Enclosure When the FRU S tat us LED on VT rak’s f ront p anel shows Amb er or Red , chec k the L EDs on the b ack of VT rak. These L EDs give th e sta tus of t he field repla ceable u nit s. Figure 6. LEDs on the back of VT rak Under normal c onditio ns, the p ower su pply , batte ry and fan LEDs s hould di[...]

VTrak 15110 User Man ual 230 T o check a compo nent’ s inst allation, fol low the same procedure as replac ing the compon ent, ex cept that you reins ta ll the orig inal c omponen t rather than a new one. In mos t cases , this action fixes a bad connec tion and allo ws VT rak to detect the co mponent. If th is action do es not correc t the proble[...]

Chapter 8: Troubleshoo ting 231 Connect ion Lo st Normal re sult of l ogging out. Also a result o f poor SCSI/FC c able or ne twork c onnection . Disk Notification Disk D own Identif y the dis k drive i nvolv ed. Power down the syste m, remov e and te st the drive. Replac e the driv e as needed . Disk Pl ugged In A disk dri ve has be en plu gged in[...]

VTrak 15110 User Man ual 232 Logic al Drive Migratio n Comp leted Exp ansion or RAID le vel chan ge of l ogical d rive finish ed. Norm al. Logic al Drive Migratio n S topped User abo rted exp ansion or RAID l evel ch ange. Nor ma l. Logic al Drive Rebuil d St a r t Rebuild begun . This can happ en auto maticall y depend ing on C ontroller s ettings[...]

Chapter 8: Troubleshoo ting 233 Logic al Drive Quick Initial ization S toppe d User aborted Quick Initial ization. Norm al. Logic al Drive Perc ent Comp leted Pro g res s in p erc en t of sync h ron izi ng or re bu ild ing a logic al drive. N ormal Enclosure Notific ation Enclosure Powe r Down Powe r switched OFF . T urn power ON. Enclosure Power U[...]

VTrak 15110 User Man ual 234 Critical & Off line Disk Arrays A faul t-tolerant di sk array—R AID 1, 3, 5 , 10 and 50 —goes c ritical whe n a driv e is remo ved or fai ls. Due to the f ault to lerance o f the disk array , the dat a is st ill avai lable an d onli ne. Howev er , once t he dis k array go es critic al, the di sk ar ray has lost [...]

Chapter 8: Troubleshoo ting 235 W ith a Hot S p are D rive Aft er the dis k array reb uilds it self us ing the h ot spa re: 1. Repla ce the fai led dri ve. 2. Check the a utomatic rebuild an d hot sp are p olicy to be su re your dis k array (s) reco gnize(s) the new drive as a hot sp are. Without a Hot S pare Drive If no hot sp are drive is availab[...]

VTrak 15110 User Man ual 236 When a red circ le appear s over a Ho st in T ree V iew , click o n the En closure ico n. The Encl osure sc reen wil l displa y (belo w). In th is exam ple, a power s upply fan has sto pped t urning, indicati ng a f ailure. The Encl osure Di agram dis plays c olor and m otion ch anges to identi fy a faile d fan. I n thi[...]

Chapter 8: Troubleshoo ting 237 Over heati ng Overh eating is a potenti ally s erious c ondition becau se the excess ively high tempera tures can lead to disk dri ve fai lur e an d cont ro ller m alf unct io n. Overh eating us ually res ult s from : • Fan failure • Poor air circulati on around the enc losure We bP AM report s fail ed fans a lon[...]

VTrak 15110 User Man ual 238 Power Supplies VT raks are equi pped wi th redundan t power sup plies. Th e advan tage of dual p ower sup plies is that, sho uld one fa il, the other wil l continu e powering the su bsystem un til the faulty on e can b e replac ed. VT rak is cap able of operati ng on a sin gle pow er suppl y . As a resu lt, if o ne powe[...]

Chapter 8: Troubleshoo ting 239 Connection Pr oblems When you inst all your Promise pro duct f ollowin g the ins tructions in the Quick St a r t G u i d e and U ser Man ual , you should ha ve li ttle troubl e getting y our equi pment to w ork the first ti me. But co nnecti on proble ms can a rise th at are n ot the Us er's or In st aller'[...]

VTrak 15110 User Man ual 240 For VT rak, you must use the CL U to set the Manag ement Port IP addres s in order for W ebP AM to co nnect with it. Thi s issue is discus sed fu rther under Netw ork Connec tions (below). S ee the V T rak Qu ick S tart Gui de or Cha pter 2 o f the Us er Manual for mo re info rmation on setup and conn ections. The CL U [...]

241 Chapter 9: Sup port • Frequ ently Ask ed Questio ns (below) • How to co ntact T ech nic al Su ppor t ( page 2 45) • Lim ited W arranty (p age 248) • Returni ng produc t for rep air (p age 249) Frequently Asked Questions What k ind of disk d rives ca n I use with VT rak? VT rak was d esigned to use Serial A T A disk d rives. Y ou can al [...]

VTrak 15110 User Man ual 242 Can I c onnect my VT rak on the same SCSI ch ain with othe r devices? No. D o not conn ect other de vices to the SCSI c hain with a VT rak. If you wan t to m onitor you r VT rak an d run othe r SCSI devi ces from the sa me PC, add anoth er SCSI card to the PC. Can I c onnect my VT rak on the same SCSI ch ain as my Prom [...]

Chapter 9: Support 243 I can access the VT rak ov er my comp any’ s intranet. B ut I can’t access it from an out side Internet connection. How do I make the Intern et conne ction work? This condit ion is not rel ated to VT rak, but is du e to your firewal l and netwo rk con nect ion pro t oco l. C onta ct yo ur M IS A dmi ni str at or . With ot[...]

VTrak 15110 User Man ual 244 The VT rak h as no LCD p anel. How c an I se t it up and cr eate disk arrays ? There are two wa ys to se t up VT rak and c reate d isk arrays, using W ebP AM PRO, o n page 1 1 1 or the Com mand Lin e Utilit y , on pa ge 161 . Why d o the Rebuild, S ynchroniz e, Exp and a nd Migrate op erations t ake so long c omp ared t[...]

Chapter 9: Support 245 Contacting T echni cal Support Promi se T echnical Supp ort provi des seve ral support op tions fo r Promise users to acces s informa tion an d updates . W e encoura ge you to use one o f our e lectronic servic es, whi ch provid e produ ct inform ation upda tes fo r the most ef ficient s ervice and s upport. If y ou de c ide [...]

VTrak 15110 User Man ual 246 Euro pe, Afric a, Mid dle East Pacific R im E-mail Supp ort suppor t@promis e.nl Fax T echnic al Support +31 (0) 4 0 256 946 3 Attentio n: T echnical Su pport Phone T echnical Su pport +31 (0) 4 0 235 260 0 8:30-5:0 0pm The Ne therlan ds T ime If you wish to write us for su pp ort : Promise T echnolog y Europe B.V . Att[...]

Chapter 9: Support 247 China E-mail Supp ort suppor t-china@pro mise.co m Fax T echnic al Support +86- 10-8857-80 15 Attentio n: T echnical Su pport Phone T echnical Su pport +86-10-8 857-80 85/8095 9:00-6:0 0pm China T ime If you wish to write us for su pp ort : Promise T echnolog y China Attn: T echnical Supp ort Room 12 05, T ower 3 We bok T ime[...]

VTrak 15110 User Man ual 248 Limited Warranty Promise T echnol ogy , Inc. (“Pro mise”) warrant s that f or three (3) y ears from the time of the del ivery of the prod uct to the original end us er: a) t he pro duc t wi ll c on for m to Pr omis e’s sp eci f icat ion s; b) the pro duct will be free from defect s in mate rial and wo rkmanshi p u[...]

Chapter 9: Support 249 No oth er docu ment, st atemen t or repre senta tion may be relied on to v ary the terms of this limited warrant y . Promi se’s s ole respo nsibi lity with re spect to any pro duct is t o do one o f the foll owing: a) repla ce the product wi th a co nforming unit of the sa me or sup erior produ ct; b) r epa ir t he p rod uc[...]

VTrak 15110 User Man ual 250 The tec hnician will as sist you in determi ning whet her the produc t requ ires repa ir . If the product n eeds repair , the T ech nical Sup port Dep artment will is sue an R MA (Return Merch andise Au thoriza tion) num ber . Return ONL Y the spe cific pro duct covere d by the w arranty (d o not shi p cables , man uals[...]

251 Append ix A: Seria l Connect or Pinout Below i s the pin out di agram for th e DB-9 se rial conn ector on a ll VT raks. The d iagrams represent t he connec tor as you see it lookin g at the ba ck of the VT rak. Pin Signa l 1— 2R X D 3T X D 4— 5G N D 6— 7— 8— 9— 1 2 3 4 5 6789[...]

VTrak 15110 User Man ual 252[...]

253 Index A About Th is Manua l 1 Archi tectur al Des criptio n of V Trak 3 Aud ibl e al arm 67, 136, 223 B Beepe r 67 Boot S ector, wi pe 15 6 Buzz er 136 C Cache se ttings 219 Certific ations 6 Choose cach e se tting 21 9 CIMOM Agent 34 CLU Auto Re build Opti on 169 Battery 152 Blin k L ED 157 Buzz er 151 conne cti on 57 Contro ller Ma nag ement [...]

VTrak 15110 User Man ual 254 Status LED 25 usable i n VT rak 241 View parameters 155 Writ e cache 155 Disk St atus LE D 25 E Emai l Ale rt Notific ation , set up 86 Encl osur e Prob lem r eport ing 235 Envi ronm ental 6 Even t Log 74 Even ts and meanin gs 79 F Firmware Update 190 Firmware update Serial port 194 Freque ntly A ske d Questi ons 241 FR[...]

In dex 255 N Networ k con necti ons, prob le ms 240 O Operati ng Syst ems, sup ported 6 OS sup port for Web PAM P RO 33 Over view 2 Over view of VTr ak 2 P Pass wor d, chang e 85 PATA disk dri ve insta ll 13 set j ump ers 10 PATA- to-S ATA A dapter 13 Ping test, M anageme nt por t 178 popup m essa ges, m eaning 230 Power conn ection 23 Power LED 24[...]

VTrak 15110 User Man ual 256 Telnet Enabl e 29 Make co nnecti on 30 Teln et sett ings 174 Termi nal Em ulati on 25 Termi nator, SCS I 17 TFTP Se rver setti ngs 176 Troubl eshoo ting 223 U Unpack V Trak 7 User Add 77 delete 83 Rights 83 Util ity Se rver 33 V VTra k beepin g 223 Mainte nance proc edure s 189 returning for rep air 249 subs ystem s on [...]