Rackmount Solutions RKP241x-208KVM инструкция обслуживания

RK P2 1x - 20 8 KVM Series RK P2 41x - 2 08 KVM Series USER’S MANUAL WHERE TO BUY http://www.rackmountnet.com 1933 O'Toole Ave, #A107 San Jose, CA 95131 , USA Toll Free Tel : (866) 955 - 0598 email : sales@rackmountnet.com[...]

Rev . JUL-02 Introduction Thank you for purchasing RKP215-208KVM Rackm ount LCD Keyboard Draw er with 8 ports KVM switch. LCD Keyboard Drawer with 8 ports KVM switch is ideal for application where sp ace is critical. RKP215-208KVM is a combination of keyboard, trackball, KVM switch and TFT LCD p acked into a drawer with features su ch as monitor fl[...]

Rev . JUL-02 Packing Content s RKP215-208KVM LCD Keyboard Drawer with KVM swit ch 1 PCS User ’s manual 1 PCS AC to DC Power Adapter w/po wer cord 1 PCS Rack Mount Kit 1 SET S tandard 3 -in -1 KVM cabl e 8 PCS Before Unpacking It is very important to locate the LCD Keyboard Drawer with KVM switch in a suit able environment. z The surface for placi[...]

Rev . JUL-02 Import ant Safeguards Please read all of these instructions carefully before you use the device. Save this manual for future reference. z Unplug the LCD Keyboard Dra wer with KVM sw itch from the power outlet before cleaning. z Do not spray liquid cleaners or aerosol d irectly on the device. Wet a cloth with a neutral detergent (e.g. c[...]

Rev . JUL-02 LCD Session[...]

Rev . JUL-02 On Screen Display - OSD  OSD is the convenient way for a user to adjust the screen performance to his satisfaction. 1. Entering the OSD Meun 2. Press the to display the OSD main menu. 3. Selecting icons for adjusting 4. Use buttons to scroll through the icons wit hin the main menu and other sub-menus the currently selected icon will[...]

Rev . JUL-02 8. Select “Auto” fo r autoadjust LCD quality[...]

Rev . JUL-02 Customizing the Settings 1. Brightness • T o perform brightness adjustm ent of the input RGB signal 2. Contrast • T o adjust the contrast level of the input signal 3. Phase • T o optimize the picture qualit y by adjusting the sampling cl ock of the input RGB Signal 4. Frequency • T o adjust the frequency of the input signal to [...]

Rev . JUL-02 1. H - Position • T o adjust the horizontal position of the OSD frame 2. V - Position • T o adjust the vertical position of the OSD frame 3. Half T one • T o switch the OSD color from full color to half tone 4. OSD Timeout • T o modify the duration of the OSD time-out 1. Information • T o display the existing input signal inf[...]

Rev . JUL-02 3. Half T one • T o switch LCD power ON/OFF auto mode Resolution Setting S tep 1 – Press right click on the desktop S tep 3 – change the “Screen Resolution” S tep 4 – change the “Screen r efresh rate” St e p 2 – Choose “Pr operties”[...]

Rev . JUL-02 F AQ  My display doesn’t work, even thou gh the computer appears to work 1. Make sure the power cable is securely plugged into the display 2. Make sure the display is turned on 3. T ry turning the display off and then turning it on again 4. Make sure the display’ s power cord is plugged into a power outlet and into the AC power [...]

Rev . JUL-02 F AQ – Sun Server  Sun Server are using reso lution at 1 152 x 900 x 76Hz  Supported resolution mode  640 x 480 x 70/75Hz  800 x 600 x 70/75Hz  1024 x 768 x 70/75Hz  1280 x 1024 x 75Hz (17” LCD)  Note the Max. frequency of 13.3” is 70Hz  Y ou need to change the Sun Server re solution before you connect to [...]

Rev . JUL-02 T echnical Information Size 17” Screen T ype TFT Ac tive Matrix Display Area 337.92mm(H) x 270.336m m(V) Contrast Ratio 350 : 1 Viewing Angle 150 { (H) x 125 { (V) T yp. Resolution XGA 1280 x 1024 Pixel pitch 0.264mm (H) x 0.264mm (W) Response Ti me T r=5ms, Tf=20ms T yp Brightness 250 cd/m2 Panel Color 16.7M Colors LCD Back Light 4 [...]

Rev . JUL-02 KVM Session[...]

Rev . JUL-02 KVM PS/2 Cable:  Mini Din 6 pin Male to Male VGA Cable:  HDB15 pin Male to Male Installation Before installation, please make sure all of peripherals and computer s have been turned of f. 1. Connect the Keyboard, VGA, Mouse cables to the com puter ports of KVM switch 2. Af ter Powering on computers and finishing t he boot-up proc[...]

Rev . JUL-02 S tartup 1. Power on the KVM power 2. 7 segment s LED is on 3. Key-in the p asswor d, default is “00000000” 4. If you forget your p assword, please send back to Manufacturer / Distributor 5. Pressing to view all port  1 2 3 4  8 7 6 5 LED Indication  When you change the channel  If the PC is turn of f or is disconnected[...]

Rev . JUL-02 Hot Key  Press “Bank” & “Channel” at the same ti me to reset the KVM switch to default setting • S.L. + S.L. + Previous Channel • S.L. + S.L. + Next Channel Note: Y ou also could press “up arrow key” or “down arrow key” lo nger time to speed up selecting the destination port • S.L. + S. L. + Page Up Previou[...]

Rev . JUL-02[...]

Rev . JUL-02 OSD Menu  Use “ Ta b ” key to select items like Bank , OSD, SCAN, CHANGE P ASSWORD, CONSOLE ON/OFF , etc…  Use Page Up & Page Down to switch previous or next bank BANK : 1 01 SYSTEM 01 0 2  SYSTEM 02 ( 03  SYSTEM 03 04  SYSTEM 04 05  SYSTEM 05 06 SYSTEM 06 07 SYSTEM 07 08  SYSTEM 08 OSD : 1 0 SEC. CHANGE [...]

Rev . JUL-02 OSD Menu BANK : 1 01 SYSTEM 01 0 2  SYSTEM 02 ( 03  SYSTEM 03 04  SYSTEM 04 05  SYSTEM 05 06 SYSTEM 06 07 SYSTEM 07 08  SYSTEM 08 OSD : 1 0 SEC. CHANGE P ASSWORD SCAN: 1 0 SEC. CONSOLE ON /OFF ESC : QUIT ENTER :COMPLETE T AB : NEXT INSER T :EDIT Ç / È : SELECT PORT PgDn/PgUp: BANK SELECT • PC Name List • “  ?[...]

Rev . JUL-02 OSD - Password Console On/OFF  ON – any user can the console  OFF – user is not allow to use the console, unless key-in p assword  Default – OFF , you need to key-in p assword Escape  PC name show in the up-lef t corner  Press “Esc” key to dear the message right away of OSD menu ENTER P ASSWORD : █ ESC : QUIT[...]

Rev . JUL-02[...]

Rev . JUL-02 Cascade Using 3 in 1 KVM cable connect from Bank 1’ s “Ca scade port” to Bank 2’s “Console port”. After connected please press “Bank” & “C hannel” button on the front of th e KVM switch to reset the KVM switch. Bank 1 Bank 2 Bank 3 Bank 8 (Max)  Cascade level Max. 8 level  Max. PC connection is 128 (all us[...]

Rev . JUL-02 FA Q 1. Don’t press any keys on th e keyboard while the select ed computer is booting up. Otherwise, it might cause th e keyboard error or keyboard is not detected at PC side. 2. The computer boot up fine, but keyboard doesn’t work z Make sure the keyboard works when directly plugged into the computer . z T ry a different keyboard,[...]

Rev . JUL-02 T echnical Information 8 Port s KVM Switch PC Port 8 PC Port Connector (All Female T ype) PS/2 Keyboard mini Din 6 pin PS/2 Mouse Mini Din 6 pin VGA HDDB 15pin Daisy Chain Port Connector (All Female T ype) PS/2 Keyboard mini Din 6 pin PS/2 Mouse Mini Din 6 pin VGA HDDB 15pin PC selection On Screen Display Manual, Hot Key , Push Button [...]