RCA D770 инструкция обслуживания

D770 TV DVD PLA YER CABLE BO X DBS SY STEM AUDIO SY STEM VCR UNIVERSAL REMOTE • Consolidates up to 5 component remotes! • Long range RF transmitter for select satellite systems • Comfortable grip & keypad layout promotes ease of use Compatible with most brands of components . *See compatibility on back[...]

Thank you for purchasing this RCA universal remote contr ol. This product is designed to operate a wide variety of video and audio components. Please retain this guide for futur e refer ence. This universal remote contr ol is already pr ogrammed for most RCA, GE, and PROSCAN branded TVs, VCRs, DBS systems (manufactured before 2003), and DVD players[...]

Key Description ANTENNA In TV Mode, lets you switch the source of the video signal from satellite signals to an of f-air antenna or cable signal when using the OUT TO TV jack. In VCR Mode, it functions as a TV/VCR input key . ARR O WS Use the navigation arr ows to move the on-screen highlight up, down, left, or right. Using the arrows to highlight [...]

5 LED indicator light This light turns red at each valid key pr ess. When programming the r emote control, it flashes or turns on or of f to indicate programming status. MENU Displays the Main menu. If you are alr eady in the menu system, press OK or MENU to select a highlighted choice. When you are using the remote contr ol to operate an RCA, GE, [...]

Programming For TV— Direct Entr y Method 1. Manually turn on the TV . 2. Locate the enclosed TV Code List. Find your brand of TV . 3. Pr ess and hold the TV key . 4. Enter a code from the code list. 5. Release the TV key , and then press ON•OFF to see if the TV responds to the remote contr ol commands. If it doesn’t, try pressing the TV key a[...]

7 Programming The AUX1 And AUX2 Keys Y ou can assign any one of the following components to the AUX1 or AUX2 keys: A second TV , VCR, DVD, satellite system, cable box, or an audio component. Note: The AUX1 key is pre-programmed with codes to control Dish Network digital satellite receivers. The SA T key is pre-programmed with codes to control RCA D[...]

8 Using Automatic Code Search The following instructions can be used to program the r emote to control the TV , VCR or DVD. If you want to exit the automatic code search without programming any of your components, pr ess the CLEAR key until the LED (red light) turns of f. 1. T urn on the component you want to control (TV , VCR or DVD). 2. Press and[...]

9 Changing The RF Remote Control Code (Continued) 1. Select Options in the Main menu. 2. Select System Options. 3. Select RF Remote. 4. If you normally use the SA T key on your remote to control your RCA satellite receiver , choose a number between 000 and 255. Follow the on-screen instructions to enter this number as your RF r emote control code. [...]

10 T roubleshooting Problem: The remot e can’t be programmed to operate your component. • Y ou may be too far away from the component or at a wrong angle. This remote uses IR (infrar ed) technology to communicate with components. The remote sends the code and the component’s IR sensor reads the code. Therefor e, there must be an unobstructed [...]

11 Questions Please visit www .rca.com Problem: The V CR won’t record. • As a safety feature, you must press the RECORD key twice to begin recor ding. • Make sure the tape is properly loaded in the VCR. • Make sure the tape is not write-protected. If the safety tab is removed, the tape is write- protected and you cannot r ecord onto that ta[...]

* Y our RCA universal remote control is compatible with most brands of infrared remote-controlled components manufactured after 1990. Some well-known brands are shown below . The complete list of brands is found on the Code List inside this package. The remote already operates most RCA, GE and PROSCAN products without any programming! • Updated c[...]