Renesas M30850T2-EPB инструкция обслуживания

REJ10J1005-0200 ( T ) M30850T2-EPB User's Manual Emulation Probe for M32C/80, 84, 85, 86 and 8A Groups Rev.2.00 Apr. 01, 2007[...]

1. Renesas Technology Corp. puts the m aximum effort into making semicondu ctor products better and more reliable, b ut there is always the possibility that trouble may occur with them . Trouble with semico nductors may lead to personal inju ry, fire or property damage. Remember to give due consi deration to safety when making your circuit designs,[...]

M30850T2-EPB User’s Manual Preface REJ10J1005-0200 Rev.2.00 April 1, 2007 Preface The M30850T2-EPB is an emulation probe for M32 C/80, 84, 85, 86 and 8A Group MCUs. The M30850T2- EPB is used by connecting to the PC7501 emulator main unit. This user's m anual mainly describes s pecifications of the M 308 50T2-EPB emulati on probe and ho w to [...]

M30850T2-EPB User’s Manual Important REJ10J1005-0200 Rev.2.00 April 1, 2007 Important Before usin g this prod uct, be sure to read thi s user’s m anual carefully. Keep this use r’s manual, an d refer to thi s when yo u have questi ons about thi s product. Emulator: The emulator in this document refers to the following pro ducts that are manuf[...]

M30850T2-EPB User’s Manual Important REJ10J1005-0200 Rev.2.00 April 1, 2007 Usage restrictions: This emulat or has been devel oped as a m eans of supp orting system development by users. T herefore, do not use it as a de vice used for eq uipment-em bedded applicat ions. Also, do not us e it for devel oping the syst ems or equipm ent used fo r the[...]

M30850T2-EPB User’s Manual Precautions for Safety REJ10J1005-0200 Rev.2.00 April 1, 2007 Precautions for Safety Definitions of Signal Words In both t he user’s manual a nd on the product i tself, several icons a re used t o insure pro per handl ing of t his product and also to prevent inj ur ies to you or other persons, or damage to your proper[...]

M30850T2-EPB User’s Manual Precautions for Safety REJ10J1005-0200 Rev.2.00 April 1, 2007 WARNING Warnings for AC Power Su pply: z If the attached AC power cable does not fi t the receptacl e, do not alter the AC power cable and do not plug it forcibly. Failure to comply may cause electric shock and/or fire. z Use an AC power cable which complies [...]

M30850T2-EPB User’s Manual Precautions for Safety REJ10J1005-0200 Rev.2.00 April 1, 2007 CAUTION Cautions to Be Taken for Turning On the Power: z Turn ON the power of the e mulator and user system as simultaneously as possible. Turn OFF the power of the emulator and user system as sim ultaneously as possible. z Do not leave either the emulat or o[...]

M30850T2-EPB User’s Manual Contents REJ10J1005-0200 Rev.2.00 April 1, 2007 Contents Page Preface ........................................................................................................................ ..................................................3 Import ant ...................................................................[...]

M30850T2-EPB User’s Manual Contents REJ10J1005-0200 Rev.2.00 April 1, 2007 Page 4. Hardware S pecifications ..................................................................................................... ....................................75 4.1 Target MCU Specifications .....................................................................[...]

M30850T2-EPB User’s Manual User Registration REJ10J1005-0200 Rev.2.00 April 1, 2007 User Registration Customer Registration Sheet is included with this manual, fill it in and FAX it to your local distributor or email the same contents to the following address. If you regist er it by email, y ou can use a text form at for user registrat ion create[...]

M30850T2-EPB User’s Manual Terminology REJ10J1005-0200 Rev.2.00 April 1, 2007 Terminology Some specific words used in this user's m anual are define d as follows: Emulator sys tem This means an emulator system built around the PC7501 emulator. The PC7501 emulator system is configured with an emulator m ain unit, em ulation pro be, host machi[...]

M30850T2-EPB User’s Manual 1. Outline REJ10J1005-0200 Rev.2.00 April 1, 2007 1. Outline This chapter describes the package c omponen ts, the system configuration and the prepar ation for using th is pro duct for the firs t time. 1.1 Package Components The M30850T2- EPB package consists of the follow ing items. When unpacking it, check to see if y[...]

M30850T2-EPB User’s Manual 1. Outline REJ10J1005-0200 Rev.2.00 April 1, 2007 1.3 System Configuration 1.3.1 System Configuration Figure 1.1 s hows a confi guration of the M308 50T2-EPB s ystem. Figure 1.1 Syst em configuration (1) Emulation probe M308 50T2-EPB (t his product) This emulat ion probe contai ns an evaluation MCU. (2) Converter board [...]

M30850T2-EPB User’s Manual 1. Outline REJ10J1005-0200 Rev.2.00 April 1, 2007 1.3.2 Names and Functio n s of the PC7501 Upper Panel LEDs Figure 1.2 s hows the nam es of the LEDs on the upper pa nel of the em ulator. Figure 1.2 Names of the LE Ds on the up per panel of t he PC7501 (1) System Status LEDs The system status LEDs indicate the emul at o[...]

M30850T2-EPB User’s Manual 1. Outline REJ10J1005-0200 Rev.2.00 April 1, 2007 (2) Target Status LEDs The target status LE Ds indicat e the target MCU' s operating stat us and target boa rd's power s upply. Tabl e 1.4 lists the defi niti on of each target status LED. Table 1.4 Defi nitions o f the target statu s LEDs Name Status Meaning O[...]

M30850T2-EPB User’s Manual 1. Outline REJ10J1005-0200 Rev.2.00 April 1, 2007 1.4 Specifications Tables 1.5 and 1.6 list t he specificati ons of the M30 850T2-EPB. Table 1.5 M30 850T2-EPB speci fications (1/ 2) Applicable M CUs M32C/80, 84, 85 , 86 and 8 A Gr o ups Evaluation MCU M30855FHG P ROM size: 512 KB + 4 KB, RAM size: 24 KB Usable m ode Si[...]

M30850T2-EPB User’s Manual 1. Outline REJ10J1005-0200 Rev.2.00 April 1, 2007 Table 1.6 M30 850T2-EPB speci fications (2/ 2) Host machine interface - LPT parallel (ECP, EPP, By te/compatibility and Nibble/com patibility modes) - USB ( USB 1.1, full-sp eed*) - LAN (10BASE-T) Emul ato r po wer su ppl y Supplied from incl uded AC adapte r (power supp[...]

M30850T2-EPB User’s Manual 2. Setup REJ10J1005-0200 Rev.2.00 April 1, 2007 2. Setup This chapter describes the preparation f or using this product, t he procedure f or startin g up the em ulator and ho w to change settings. 2.1 Flowchart of Star ting Up the Emulator The procedure fo r starting up the emulator is shown in Figure 2.1. For details, [...]

M30850T2-EPB User’s Manual 2. Setup REJ10J1005-0200 Rev.2.00 April 1, 2007 2.2 Installing the Emulator Debugger If the OS used in your host machin e is Windows XP or 2 000, th is installation must be executed by a user with administrator rights. Be aware that users without administrato r rights cannot complete the installation . Install the em ul[...]

M30850T2-EPB User’s Manual 2. Setup REJ10J1005-0200 Rev.2.00 April 1, 2007 2.3 Connecting the Host Machine When connectin g the em ulator PC7501 to a host machine, you can choo se your desired interface from LPT parallel interface, USB interface and LAN int erface. Use the interface selection s witch on the emulator PC7501' s rear panel to s[...]

M30850T2-EPB User’s Manual 2. Setup REJ10J1005-0200 Rev.2.00 April 1, 2007 2.4 Connecting the PC7501 Figure 2.3 shows how to connect th e PC7501 and the emulation probe. Figure 2.3 C onnecting the PC 7501 and em ulation probe CAUTION Cautions for Connecting the PC7 501: z When connecti ng the emulat ion probe, be sure t o hold the both sides of t[...]

M30850T2-EPB User’s Manual 2. Setup REJ10J1005-0200 Rev.2.00 April 1, 2007 2.5 Connecting the Power Supply for the Emulator The power is supplied from AC adapter to the emulator PC7501. Here following ex plains how t o connect the AC adapter. (1) Turn OFF the power to the PC7501 . (2) Connect the DC cable of AC adapter to the PC7501. (3) Connect [...]

M30850T2-EPB User’s Manual 2. Setup REJ10J1005-0200 Rev.2.00 April 1, 2007 2.6 Turning ON the Power 2.6.1 Checking the Connections of the Emulator Syste m Before turning the power ON, check the connection of the interface cable with host machine, PC7501, emulation probe, and user system. 2.6.2 Turning ON/OFF the Powe r z Turn ON the power of t he[...]

M30850T2-EPB User’s Manual 2. Setup REJ10J1005-0200 Rev.2.00 April 1, 2007 2.6.4 LED Display When the Emulator Starts Up No rmally Figure 2.4 shows upper pan el LED lighting status when the emulator started up properly. Check it wh en starting up the emulator sy stem. - I f t his LED does not li g ht, check the power supply vol tage of t he user [...]

M30850T2-EPB User’s Manual 2. Setup REJ10J1005-0200 Rev.2.00 April 1, 2007 2.7 Downloading Firmware 2.7.1 When It is Necessary to Downl oad Firmware It is necessary to do wnload the firmware when: (1) you use th is pro du ct for the first time (2) the firmware has bee n upgraded (3) the emulator debugg er has been upgraded (4) you use this produc[...]

M30850T2-EPB User’s Manual 2. Setup REJ10J1005-0200 Rev.2.00 April 1, 2007 2.8 Self-check 2.8.1 Self-check Procedure To run the emulator self-check, do so as explained here below. While the self-ch eck is in progress, LEDs will chang e as shown in Figure 2. 6. (1) If the user system is connected, disconnect it. (2) Set the switches as the factory[...]

M30850T2-EPB User’s Manual 2. Setup REJ10J1005-0200 Rev.2.00 April 1, 2007 2.8.2 If an Error is Detected in the Self-check If the self-c heck does not result no rmally (ERR OR 1 to ERROR 4 in Figure 2.6), check t he followin g. (1) Recheck the con nection of the emulation probe and PC7501. (2) Redownload the proper firm ware. IMPORTANT Note on th[...]

M30850T2-EPB User’s Manual 2. Setup REJ10J1005-0200 Rev.2.00 April 1, 2007 2.9 Connecting the User System There are eight ways available to c onnect the emulat ion pr obe to use r system s as shown in Figu re 2.7. 144-pi n 0.5mm pi tch 0.65m m pitch 0.5m m pitch M30800 T-P TC M3T -100LC C-D MS M3 T-FLX 100 -T M3T -FLX100 -R ● : No1 . pin *1: Th[...]

M30850T2-EPB User’s Manual 2. Setup REJ10J1005-0200 Rev.2.00 April 1, 2007 2.9.1 Connecting to a 100-pin LCC Socket When connecting the em ulation probe to a 100-pin LCC socket (Yamaichi Electronics Co., Ltd.: IC61-1004-051 etc.) on the user system, following the procedure below. (1) Attach th e CN2 side of the M30850T2-EPB to the CN2 side of the[...]

M30850T2-EPB User’s Manual 2. Setup REJ10J1005-0200 Rev.2.00 April 1, 2007 2.9.2 Connecting to a 100-pin 0.65mm pitch Foot Pattern (P art 1) Figure 2.9 s hows how to c onnect the emulat ion probe to a 100-pin 0.65m m pitch foot pattern on t he user system with the M3T- F160-100NR B (not inclu ded), and here following i s its proc edure. For detai[...]

M30850T2-EPB User’s Manual 2. Setup REJ10J1005-0200 Rev.2.00 April 1, 2007 2.9.3 Connecting to a 100-pin 0.65mm pitch Foot Pattern (P art 2) Figure 2.1 0 shows how to co nnect the em ulation pro be to a 1 00-pin 0.65 mm pitch f oot pattern on the us er system wi th the M3T-DIRECT 100S (not included), a nd here f ollowing is i ts procedure. For de[...]

M30850T2-EPB User’s Manual 2. Setup REJ10J1005-0200 Rev.2.00 April 1, 2007 2.9.4 Connecting to a 100-pin 0.65mm pitch Foot Pattern (P art 3) Figure 2.1 1 shows how to co nnect the em ulation pro be to a 1 00-pin 0.65 mm pitch f oot pattern on the us er system wi th the M3T-DUMM Y100S (not i ncluded) , and her e following is its proce dure. For de[...]

M30850T2-EPB User’s Manual 2. Setup REJ10J1005-0200 Rev.2.00 April 1, 2007 2.9.5 Connecting to a 100-pin 0.5mm pitch Foot Pattern Figure 2.12 shows how t o connect the em ulation pr obe to a 100-pi n 0.5mm pitch foot pa ttern on the user system with the M3T- F160-100NS D (not inclu ded), and here fol lowing is its p rocedur e. For details on the [...]

M30850T2-EPB User’s Manual 2. Setup REJ10J1005-0200 Rev.2.00 April 1, 2007 2.9.6 Connecting to a 144-pin 0.5mm pitch Foot Pattern Figure 2.13 shows how t o connect the em ulation pr obe to a 144-pi n 0.5mm pitch foot pa ttern on the user system with the M3T- FLX-144NSD (not included), and h ere following is its procedur e. For details on the M3T-[...]

M30850T2-EPB User’s Manual 2. Setup REJ10J1005-0200 Rev.2.00 April 1, 2007 2.10 Setting Switches 2. 1 0. 1 Setting Swit ches of E mulation P robe Set the switches of the emulation probe according to th e conditio n. Figure 2.14 shows the pos ition s of the switches of the M30850T2-EPBM. Figure 2.14 P ositions of the switches M30850T2- EPBM REV.B [...]

M30850T2-EPB User’s Manual 2. Setup REJ10J1005-0200 Rev.2.00 April 1, 2007 (1) Setting JP1 , SW1 to S W4 on the M 30850T2-EPB M Table 2.2 shows th e setting s of JP1, SW1 to SW4 on the M30850T2-EPBM. Table 2.2 Switch settings of the M30850T2-EPBM (JP1, SW1 to SW4) Switch Switch name Set ting Description VCC1=2 VCC1>2 (Factory-setting) 3.0 V ?[...]

M30850T2-EPB User’s Manual 2. Setup REJ10J1005-0200 Rev.2.00 April 1, 2007 (2) Setting SW 5 on the M30850T2-EPBM Table 2.3 lists the examples of setting the switch SW5. It is necessary to change the setting if using the analog input port selection function of the A/D converter. Setting the SW5 enables to set each analog input pin for se lec ting [...]

M30850T2-EPB User’s Manual 2. Setup REJ10J1005-0200 Rev.2.00 April 1, 2007 IMPORTANT Notes on Swit ch JP 1: z If using this product when the voltage of VCC1 is higher than that of VCC2, set the JP1 of the M30850T2- EPBM to VCC1>2. z When the JP1 of the M30850T2 -EPBM is set to VCC1>2, the vo ltage of VCC2 on the user system should be 3.3 V [...]

M30850T2-EPB User’s Manual 2. Setup REJ10J1005-0200 Rev.2.00 April 1, 2007 2.10.2 Selecting Clock Supply You can choos e a clock sup plied to the eval uation MCU b y the Emulat or tab in the I nit dialog b ox of the em ulator debu gger. Table 2.4 lis ts the factory-set tings of eac h clock supply . Table 2.4 Cl ock supply to the M CU and def ault[...]

M30850T2-EPB User’s Manual 2. Setup REJ10J1005-0200 Rev.2.00 April 1, 2007 2) Replacing an Oscillator Circuit Board Remove the four screws of bo th sides of t his product a nd lift of f the upper cover (see Fig ure 2.15). Figure 2.1 5 Removing t he upper cover Page 41 of 98[...]

M30850T2-EPB User’s Manual 2. Setup REJ10J1005-0200 Rev.2.00 April 1, 2007 Unscrew the screw of the oscillato r circu it board of the PC7501 and replace it (see Figure 2.16). The oscillator circuit board of the PC7501 is in th e lower right corner of the board. Unscrew the screw securing the oscillator circuit board. Lift off the oscillator circu[...]

M30850T2-EPB User’s Manual 2. Setup REJ10J1005-0200 Rev.2.00 April 1, 2007 3) Using the Oscillator Circuit Bare Board To use this product at a frequency you like, build a desi red oscillator circuit on the in cluded OSC-2 oscillator circuit bare board. Figure 2.17 shows an extern al view of th e OSC-2 oscillator circuit bare board and the connect[...]

M30850T2-EPB User’s Manual 2. Setup REJ10J1005-0200 Rev.2.00 April 1, 2007 (2) Using the Oscillator Circuit on the User System To operate this product with an oscillator circuit of the us er system, input the oscillato r output at 50% duty (within the operatin g range of the eval uation MC U) into pi n X IN as shown i n Figure 2.21 . Pin X OUT sh[...]

M30850T2-EPB User’s Manual 2. Setup REJ10J1005-0200 Rev.2.00 April 1, 2007 2.10.3 A/D Conversion Bypass Capacitors There is a foot pattern on t he M30850T2 -EPBM board for mountin g bypass capacit ors for the A/ D conversio n circuit. Mo unt applicable bypass capacitors as occasion demands. Figure 2.21 shows where they are installed. Figure 2.2 1[...]

M30850T2-EPB User’s Manual 3. Usage (H ow to Use the Emulator Debugger) REJ10J1005-0200 Rev.2.00 April 1, 2007 3. Usage (Emulator Debugger) This chapter descri bes how to start up the emulator de bugger and how to use the major wind ows, taking the M3T-PD308F as an example. The following c an apply to the M32C PC 7501 emul ator debugger. 3.1 Star[...]

M30850T2-EPB User’s Manual 3. Usage (H ow to Use the Emulator Debugger) REJ10J1005-0200 Rev.2.00 April 1, 2007 3. Specifyi ng the comm unication interface (LAN com munication) Specifying the communication interface Help Cancel (LAN communication) For selecting the LAN co mm unication, click the radio button “LAN” of the MCU tab. Specify the I[...]

M30850T2-EPB User’s Manual 3. Usage (H ow to Use the Emulator Debugger) REJ10J1005-0200 Rev.2.00 April 1, 2007 5. Using o r not using t he address m atch break fu nction Cancel Help Using or not using the addre ss match break function Specify whether or not to use the address match break function. - To use the address match break function (defaul[...]

M30850T2-EPB User’s Manual 3. Usage (H ow to Use the Emulator Debugger) REJ10J1005-0200 Rev.2.00 April 1, 2007 7. Using o r not using the CPU rewri te mode Using or not using CP U re write mode Specify whether or not to debug in CPU rewrite mode. To debug the user system that uses CPU r ewrite mode, select the check box. This option can be select[...]

M30850T2-EPB User’s Manual 3. Usage (H ow to Use the Emulator Debugger) REJ10J1005-0200 Rev.2.00 April 1, 2007 (2) Debuggi ng In fo rm ation tab 1. Specifying the com piler used and the object form at (3) Reset tab 1. Resetting the target after downlo ading Cancel Help Specifying the compiler used and the object format Specify the compiler you ar[...]

M30850T2-EPB User’s Manual 3. Usage (H ow to Use the Emulator Debugger) REJ10J1005-0200 Rev.2.00 April 1, 2007 (4) Emulat or tab 1. Specifying the target clock Cancel Help Specifying the target clock Specify the clock sources supplied to the MCU (main clock and sub clock). Select the appropriate clock sources according to the clock used by your t[...]

M30850T2-EPB User’s Manual 3. Usage (H ow to Use the Emulator Debugger) REJ10J1005-0200 Rev.2.00 April 1, 2007 (5) Resume tab 1. Automatically execu ting a script command 2. Restoring the last window state Cancel Help Automatically executing a script command To automatically execute a script c ommand when starting up the debugger, click the “Re[...]

M30850T2-EPB User’s Manual 3. Usage (H ow to Use the Emulator Debugger) REJ10J1005-0200 Rev.2.00 April 1, 2007 3.2 Starting Up the Emulator Debugger (EMEM Dialog Box) (1) Status tab 1. Specifying the processor mode IMPORTANT Notes on Selecting a Processor Mode: z When setting single-ch ip mode or memory expansion mode, the level of pin CNVSS of t[...]

M30850T2-EPB User’s Manual 3. Usage (H ow to Use the Emulator Debugger) REJ10J1005-0200 Rev.2.00 April 1, 2007 2. Referring to the MCU Status IMPORTANT Notes on Selecting a Processor Mode: z The MCU status is shown i n “MCU Status” of the EMEM dialog box. Check that it is matching the specified processor m ode. z Check that the RDY# and HOLD#[...]

M30850T2-EPB User’s Manual 3. Usage (H ow to Use the Emulator Debugger) REJ10J1005-0200 Rev.2.00 April 1, 2007 (2) Emulat ion Mem ory tab 1. Setting the Bank Ad dress of the Debug Moni t o r Setting the Bank Address of the Debug Cancel Help IMPORTANT Notes on Setting a Debug Monitor Bank Addre ss: z It is not pos sible to view or s et the content[...]

M30850T2-EPB User’s Manual 3. Usage (H ow to Use the Emulator Debugger) REJ10J1005-0200 Rev.2.00 April 1, 2007 2. Emulat ion Memory All ocation as Ex pansion Area Emulation Memory Allocation a s Expansion Cancel Help Area When selecting the memory expansion m ode and microprocessor mode, it is possible to allocate the emulation memory at the expa[...]

M30850T2-EPB User’s Manual 3. Usage (H ow to Use the Emulator Debugger) REJ10J1005-0200 Rev.2.00 April 1, 2007 (3) Flash Clear tab 1. Setting to clear the MCU’s internal flash ROM Cance l Help Setting to clear the MCU’s internal flash ROM Specify whether or not you want the MCU’s inter nal flash ROM to be cleared when downloading the user p[...]

M30850T2-EPB User’s Manual 3. Usage (H ow to Use the Emulator Debugger) REJ10J1005-0200 Rev.2.00 April 1, 2007 3.3 Program Window (1) Downloading the program 1. Initial screen o f the program window 2. Downlo ading the pro gram Menu Menu item Function D ownloa d L oad Modul e... M emory Im age... S ymbol... R om Data... Downlo ads th e user p rog[...]

M30850T2-EPB User’s Manual 3. Usage (H ow to Use the Emulator Debugger) REJ10J1005-0200 Rev.2.00 April 1, 2007 (2) Program execution 1. Resetting the user program 2. Executin g the user pro gram 3. Stoppi ng the user program 4. Program window screen aft er the user pr ogram has stop ped RESET Resets the program. GO Executes the program from the c[...]

M30850T2-EPB User’s Manual 3. Usage (H ow to Use the Emulator Debugger) REJ10J1005-0200 Rev.2.00 April 1, 2007 (3) Setting breakpoints 1. Screen after break poi nt setup Breakpoint setup scre en There are three types of breakpoints as descr ibed below. - Address match breakpoint (A) This breakpoint can be set only when you chose to use the addres[...]

M30850T2-EPB User’s Manual 3. Usage (H ow to Use the Emulator Debugger) REJ10J1005-0200 Rev.2.00 April 1, 2007 (4) Executing up to the cursor po s ition (Come command) 1. Specifying the Com e command Setup procedure for executing COME 2. After the Come com mand has fini shed command (1) Click the line in the progr am display area at which you wan[...]

M30850T2-EPB User’s Manual 3. Usage (H ow to Use the Emulator Debugger) REJ10J1005-0200 Rev.2.00 April 1, 2007 3.4 Hardware Breakpoint Setting Window (1) Breakpo int setup dialog box 1. Opening the hard ware breakpoint set u p di al og b ox 2. Hardware Break Point Setting Window in initial state 3. Opening the break ev ent setting dialog box H/W [...]

M30850T2-EPB User’s Manual 3. Usage (H ow to Use the Emulator Debugger) REJ10J1005-0200 Rev.2.00 April 1, 2007 4. Opening the break ev ent setting dialog box Specifying the event type (2) When FETCH is selected 1. Window for sett ing a ddress es Click to select the event type you want to set. - FETCH Detects an instruction prefetch. - DATA ACCESS[...]

M30850T2-EPB User’s Manual 3. Usage (H ow to Use the Emulator Debugger) REJ10J1005-0200 Rev.2.00 April 1, 2007 (3) When DATA ACCESS is selected 1. Window for setting the address 2. Window for set t i ng dat a Setting the address You can set eight conditions, e.g., a specified address, a specified address range, etc. Setting data You can set eight[...]

M30850T2-EPB User’s Manual 3. Usage (H ow to Use the Emulator Debugger) REJ10J1005-0200 Rev.2.00 April 1, 2007 3. Example Da ta Settings Event setting for even-address word access Setting a break event MOV.W R0,512h(R0=0203h) A1 Address 1 : 000512 Data 1 : 0203 High-order and lo w-order data effective MASK : FFFF Access : WRITE Event setting for [...]

M30850T2-EPB User’s Manual 3. Usage (H ow to Use the Emulator Debugger) REJ10J1005-0200 Rev.2.00 April 1, 2007 (4) Setting the combinatorial event con dition 1. Window for setting the co mbinatorial event condition Setting the combinatorial event condition There are following four conditions that you can choose for the combinatorial events. - AND[...]

M30850T2-EPB User’s Manual 3. Usage (H ow to Use the Emulator Debugger) REJ10J1005-0200 Rev.2.00 April 1, 2007 3.5 Trace Window (1) Trace window 1. Trace window Menu Menu item Function Opti onalW ind ows Trace Window Opens the trac e window. Trace window The trace window is used to show the results of real-time trace measurements. It has the foll[...]

M30850T2-EPB User’s Manual 3. Usage (H ow to Use the Emulator Debugger) REJ10J1005-0200 Rev.2.00 April 1, 2007 Explanation of the trace window (b us display) 2. Trace window (bus display) Bus display The following explains the displayed contents, from left to right. - Address Shows the status of the address bus. - Data Shows the status of the dat[...]

M30850T2-EPB User’s Manual 3. Usage (H ow to Use the Emulator Debugger) REJ10J1005-0200 Rev.2.00 April 1, 2007 (2) Suspending and resuming trace m easurement 1. Suspending trace measurement Stop Click this toolbar button to suspend the trace measurement in progress. 2. Resuming trace m easurement Re-Start Click this toolbar button to resume the t[...]

M30850T2-EPB User’s Manual 3. Usage (H ow to Use the Emulator Debugger) REJ10J1005-0200 Rev.2.00 April 1, 2007 (3) Trace point se tup dialog box 1. Opening the trace poi nt setup dialog box 2. Trace Point Setting Window in initial state Trace Point Clicking this toolbar button opens the trace point setting window. Trace Point Setting Window in in[...]

M30850T2-EPB User’s Manual 3. Usage (H ow to Use the Emulator Debugger) REJ10J1005-0200 Rev.2.00 April 1, 2007 3. Specifying a trace ra nge Specifying a trace range 4. Setting the trace write condition You can specify a trace range for the trace event. - Break 256K cycles of instruction execution before the user program stopped is recor ded. - Be[...]

M30850T2-EPB User’s Manual 3. Usage (H ow to Use the Emulator Debugger) REJ10J1005-0200 Rev.2.00 April 1, 2007 3.6 RAM Monitor Window (1) RAM m onitor window 1. RAM m onitor wi ndow Menu Menu item Function BasicWindows RAM Mo nitor Win dow Opening the RAM m onitor w indow RAM monitor window This window shows changes of memory contents while the u[...]

M30850T2-EPB User’s Manual 3. Usage (H ow to Use the Emulator Debugger) REJ10J1005-0200 Rev.2.00 April 1, 2007 (2) RAM m onitor area setting window 1. Opening RAM monitor ar ea setting window 2. RAM monitor area setting window in initial state Base RAM Monitor Area Setting Window in initial state By default, the monitor area is set to 000400h thr[...]

M30850T2-EPB User’s Manual 3. Usage (H ow to Use the Emulator Debugger) REJ10J1005-0200 Rev.2.00 April 1, 2007 3. RAM m onitor area setti ng dialog bo x Specifying the start address 4. RAM m onitor area setti ng dialog bo x when RAM m onitor area is changed from 400h to 1 block 5. RAM m onitor area setti ng dialog bo x You can set the start addre[...]

M30850T2-EPB User’s M anual 4. Hardware Specifications REJ10J1005-0200 Rev.2.00 April 1, 2007 4. Hardware Specifications This chapter describes speci fications of thi s product. 4.1 Target MCU Specifications Table 4.1 lists the specification s of targ et MCU s which can be debugg ed with this product. Table 4.1 Spec ifications of target MCUs f or[...]

M30850T2-EPB User’s M anual 4. Hardware Specifications REJ10J1005-0200 Rev.2.00 April 1, 2007 4.2 Differences between the Actual MCU and Emulator Differences be tween the actual MCU and em ulator are show n below. When debuggin g the MCU usin g this product , be careful about the following pr ecautions. IMPORTANT Notes on Power Supply to the User[...]

M30850T2-EPB User’s M anual 4. Hardware Specifications REJ10J1005-0200 Rev.2.00 April 1, 2007 IMPORTANT Note on Differences between the Actual MCU and Emulator: z Operations of the emulat or system di ffer from those of actual MC Us as listed bel ow. (1) Reset condition (2) Initial values of internal resource data of an MCU at power-on (3) Interr[...]

M30850T2-EPB User’s M anual 4. Hardware Specifications REJ10J1005-0200 Rev.2.00 April 1, 2007 IMPORTANT Notes on Reset Vector Area: z For a reset vector area, memory of the emulator is always selected regardless of the setting of the EMEM dialog box. Therefore when setting a micro processor mode, to us e a ROM of the user system etc. as an area i[...]

M30850T2-EPB User’s M anual 4. Hardware Specifications REJ10J1005-0200 Rev.2.00 April 1, 2007 4.3 Connection Diagrams Figures 4.1 and 4.2 show the connectio n diagrams of the M30850T2-EPB. These conn ection diagrams mainly show the interface section. The signals not s hown in Figures 4.1 and 4.2 c onnect the evaluation MCU and the user system dir[...]

M30850T2-EPB User’s M anual 4. Hardware Specifications REJ10J1005-0200 Rev.2.00 April 1, 2007 P0 P0 P0 P0 AP15 AP15 AP15 AP15 * * * * P0 P0 P0 P0 AP15 AP15 AP15 AP15 * * * * P2 P2 P2 P2 * 2 3 9 10 1 4 8 11 13 5 6 12 P15 2 P15 3 P15 9 P15 10 1 4 8 11 13 5 6 12 2 3 9 10 1 4 8 11 13 5 6 12 P2 P2 P2 P2 P15 P15 P15 P15 0 1 2 3 0 1 2 3 0 1 2 3 4 5 6 7 [...]

M30850T2-EPB User’s M anual 4. Hardware Specifications REJ10J1005-0200 Rev.2.00 April 1, 2007 4.4 External Dimensions 4.4.1 External Dimensions of the Emulation Probe Figure 4.3 shows extern al d imensions of the M30850T2-EPB connected with the M30800T-PTC and LCC sock et. PCA7501EPBA 　 REV.A MADE IN JAPAN 85.0 60.0 30.0 16.3 15.0 5.5 10.8 55.0[...]

M30850T2-EPB User’s Manual 4. Hardware Specifications REJ10J1005-0200 Rev. 2.00 April 1, 2007 4.4.2 External Dimensions of the M30800T-PT C Figure 4.4 s hows exter nal dimensions of the conve rter board M30800T-PTC f or a 100-pi n LCC. Unit : mm Figure 4.4 Ext ernal di m ensions of the M3 08 00 T-P TC 4.4.3 External Dimensions of the M3T-F 160 -1[...]

M30850T2-EPB User’s Manual 4. Hardware Specifications REJ10J1005-0200 Rev. 2.00 April 1, 2007 4.4.4 External Dimensions of the M3T-F 160 -100NSD Figure 4.6 s hows exter nal dimensions of the conve rter board M3T-F160 -100NSD for a 100-pin L QFP (PLQP 0100KB-A). Unit : mm Figure 4.6 Ext ernal di m ensions of the M3T - F160-100 NS D 4.4.5 External [...]

M30850T2-EPB User’s Manual 4. Hardware Specifications REJ10J1005-0200 Rev. 2.00 April 1, 2007 4.5 Notes on Using This Product Notes on using this product are listed below. Be sure to read these notes before using this product. IMPORTANT Notes on Downloading Firmware: z Before using this product for the first time, it is necessary to download t he[...]

M30850T2-EPB User’s Manual 4. Hardware Specifications REJ10J1005-0200 Rev. 2.00 April 1, 2007 IMPORTANT Notes on Using the CPU Clo ck at Less than 16 MHz: z To use the CPU clock at les s than 16 MHz, execut e the command shown below in the Script Window after starting the em ulator debugge r M3T-PD308 F. [Comm and] _settime out ,300 Once this com[...]

M30850T2-EPB User’s Manual 4. Hardware Specifications REJ10J1005-0200 Rev. 2.00 April 1, 2007 IMPORTANT Notes on EMEM Dialog Box: Observe the followi ng when s etting up EM EM dialog box of the em ulator debugge r. (1) D ebug Monitor Bank Addr ess z When "F0" is specified, 64 KB of area starting from F0000 0h are allocated for use by th[...]

M30850T2-EPB User’s Manual 4. Hardware Specifications REJ10J1005-0200 Rev. 2.00 April 1, 2007 IMPORTANT Notes on Debugging in CP U Re write Mode: z To debug a program in CPU r ewrite mode, select the ch eck box "Debug the program using the CPU Rewrit e Mode" in the M CU tab of th e Init dialog box. When yo u do not de bug a pro gram in [...]

M30850T2-EPB User’s Manual 4. Hardware Specifications REJ10J1005-0200 Rev. 2.00 April 1, 2007 IMPORTANT Note on Protect Resistor: z A protect is not canceled when protect register bit 2 (PRC2), which enables writing in the port P9 d irection register and t he function sele ct register A3, is changed with the bel ow procedure. (1) Step execution o[...]

M30850T2-EPB User’s Manual 4. Hardware Specifications REJ10J1005-0200 Rev. 2.00 April 1, 2007 IMPORTANT Notes on A/D Conversion: z When setting the register below to us e the analog input port selection function , you need to set the direction register of po rt P15 for a pin that pe rforms A/D conversion to "input". And you need to set [...]

M30850T2-EPB User’s Manual 5. Troubles hooting REJ10J1005-0200 Rev. 2.00 April 1, 2007 5. Troubleshooting This chapte r describes h ow to troubl eshoot whe n this prod uct does not work properly . 5.1 Flowchart to Remedy the Troubles Figure 5.1 shows the flowchart to remedy the troubles from when power to the emulator is activated until the emula[...]

M30850T2-EPB User’s Manual 5. Troubles hooting REJ10J1005-0200 Rev. 2.00 April 1, 2007 5.2 When the Emulator Debugger Does Not Start Up Properly (1) When the LEDs of the PC7501 Do Not Display Normally Table 5.1 Err ors LEDs show and their check points Connection to Error Checkpoint the user system LEDs do not light up. - Check that the power cabl[...]

M30850T2-EPB User’s Manual 5. Troubles hooting REJ10J1005-0200 Rev. 2.00 April 1, 2007 (2) EMEM Dialog Box Does Not Appear at Debu gger Startup Table 5.2 Chec kpoints of e rrors at debu gger startup Error Checkpoint Communi cation error occur red. Check all emulator debugger settings, interface cab le settings and switches on the rear of the PC75[...]

M30850T2-EPB User’s Manual 5. Troubles hooting REJ10J1005-0200 Rev. 2.00 April 1, 2007 (3) Errors Occu r at Deb ugger Startup Table 5.3 Chec kpoints of e rrors at debu gger startup Error Checkpoint Target MC U is uncontrollable. (1) C heck that the NQP ACK etc. m ounted on the use r system is soldere d properly. (2) Check that the connect or is i[...]

M30850T2-EPB User’s Manual 5. Troubles hooting REJ10J1005-0200 Rev. 2.00 April 1, 2007 5.3 How to Request for Support After checking the items in "5 Troubleshoo ti ng", fill in the tex t file which is downloaded fro m the following URL, then send the information to your local distributor. http://tool-support.renesas.com/eng /toolnews/re[...]

M30850T2-EPB User’s Manual 6. Maintenance and Guar antee REJ10J1005-0200 Rev. 2.00 April 1, 2007 6. Maintenance and Guarantee This chapter describes how to maintenance, repa ir provisions and how to request for repair. 6.1 User Registration When you purchase our product, be sure r egister as a user. For user registration, refer to “Use r regist[...]

M30850T2-EPB User’s Manual 6. Maintenance and Guar antee REJ10J1005-0200 Rev. 2.00 April 1, 2007 (3) Expiration of the repair period When a period of one year elapses aft er the model was dropped from productio n, repairing p roducts of t he model may become im possible. (4) Transportation fees at sending your product for repai r Please send your[...]

Emulation Probe for M32C/80, 84, 85, 86 and 8A Groups M30850T2-EPB Use r's M anual Publication Date: Apr. 01, 2007 Rev.2.00 Published by: Sales Strategic Planning Di v. Renesas Technology Corp . Edited by: Microcomputer Tool Development Department Renesas Solutions Co rp. © 2007. Renesas Technology Corp. and Renesas Solutions Corp., All right[...]

M30850T2-EPB User's Manual[...]