Renesas R8C/15 инструкция обслуживания

REJ10J0746-01 10 RENESAS SINGLE-CHIP MICROCOMPUTER M16C FAMILY / R8C/Tiny SERIES Rev .1.10 Renesas Solutions Corp. Revision date : Mar 01, 2005 www .renesas.com R8C/15, R8C/17 StarterKit Tutorial[...]

1. These materials are intended as a reference to assist our customers in the selection of the Renesas Technology Corporation product best suited to the customer's application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Renesas Technology Corporation or a third party. 2. Renesas Tec[...]

3 T able of Content s 1. accessory softwares to inst all 2. Until a sample program is operated with an emulator software P4 2.1 Flash programmer (Flash developm ent toolkit) Inst allation P4 2.2 Emulator Sof tware, C Compile r and High-performance Embedded Workshop Inst allations P10 2.3 USB driver installation P14 2.4 Operate Sample Program P18[...]

4 1. accessory softwares to install 1) Note the following point s before installing. a) The M3T -NC8C has already been installe d. b) The M3T -NC30WA has already been installed. c) The emulat or software h as already been installed. Install the sof tware attached to this product after uninst alling the above soft ware. 2) The di re ctory and file n[...]

5 Click “OK”. Click “Next” Select language to be used and click "Ne xt"[...]

6 Only when you agree w ith License Agreement , click "Y es". Click “Next”. Click “Next”.[...]

7 Remove a check. Clic k “Next” Click “Next”. Refer to a new folder name, or select from the existing folder li st and Cli ck “Next”.[...]

8 Refer to a new folder name, or select from the existing folder li st and Cli ck “Next”. Click “Next”. Click “Install”.[...]

9 Click “finish”.[...]

10 2.2 Emulator Sof tware, C Compiler and High-performance Embedded W orkshop Inst allations 1) Installation Double-click an inst aller of CD-ROM ¥ dlp_tool ¥. 2) Installation procedu res are described below . Select the language to be used and cli c k “Next”. Click “Next”[...]

11 Only when you agree w ith License Agreement , click "Y es". Select all and click “Next” Refer to a new folder name, or select from the existing folder list and cli c k “Next”.[...]

12 Refer to a new folder name, or select from the existing folder list and cli c k “Next”. Click “Y es” Check the setting before starting the inst allati on and if the setting is correct, click “Next”.[...]

13 Check the setting before st arting the installation and if the setting is correct, click “Next”. Then, a copy will be started. Click “Finish”.[...]

14 2.3 USB driver inst allation Connect the E8 emulator using the US B cable to the USB port of host ma chine. <Windows XP> Installation proce dures a re described below . If the E8 emulator is connected, it is recogni zed a s a new hardware. Click “Next” after sel ecting “Ins tall the sof tware automatically”. Click “Continue”. M[...]

15 Renesas USB drivers are not authenticated by Mi crosoft, but we provide them based on the sufficient examination. Insert CD-ROM and specif y ¥dlp_tool¥ DRIVERS¥USB¥XP¥. Click “OK”. Click “Finish”. The installation is complet ed above.[...]

16 <Windows 98/ME> Installation proce dures a re described below . If E8 emulator is connected, it is recognized as a ne w hard ware. Click “Next” and sta rt inst alling a driver . Put a check into “search for the be st driver for your device” and click “Next”. Insert CD-ROM and Put a check into “S pecify a location”. S pecify[...]

17 Click “Next”. Click “Finish”. The installation is complet ed above.[...]

18 2.4 Operate Sample Program 1) Copy ¥Jap anese¥M3A01 15_17¥PROGRAM¥ in CD-ROM to the given folder . 2) Change a file attribute Since the copied file attribute is set to “read-only”, cha nge it to the attribute which can be re ad or written . <Windows XP/2000> Select “Property” of the copied folder and set to the attribute which [...]

19 Click “OK”. The installation is complet ed above.[...]

20 <Windows 98/ME> Select all files in the copied folder by a mouse. Select “File” and “Property”. Remove a check of “Read-only” and click “Apply”.[...]

21 Click “Close”. Perform this setting to files in all folders of “3min_timer” and “ad _on kai”. The installation is complet ed above.[...]

22 3) Connect a t arget b oard Use a user cable to the E8 emulator and connect a t arget bo ard. Perform the below setting for the ju mper setting of a t arget board. JP No. Connecting S tatus JP1 “AN8” side JP2 “BZ” side JP3 Open JP1 : “ AN8 ” JP2 : “ BZ ”[...]

23 4) Compile a sample program The example of the musical scal e pro gram (ad_onkai.hws) is sho w n belo w . (1) S tart High-performance Embedded Workshop Select “program” of st art menu - “Renesas” - “High-perform ance Embedded Workshop” - “High-performance Embedded W orkshop” and click. (2) Select “refer to another proje ct work[...]

24 (4) Select “R5F21 174” for Device and put a check i nto “Download emulator firmware” for Mo de. Click “OK”. (5) When 5V power supply is perfo rmed from E8, put a check into “Powe r supply is carried out ”. Select 5.0V and click “OK”. (6) Select location to download a firmware and click “OK”. (8) If clicking “Build” of[...]

25 (3) Execute Click “Debug” - “Ex ecute ”. (4) If clicking “Debug” - “S top a prog ram”, a program will stop. When executing t he program again, click “Debug” - “Execute ”. <Musical Scale Program> When a program execution st art s, LED1(red) lights up. When pressing SW4 on the t arget board, the buzzer st arts soundin[...]

REVISION HISTORY Description Rev . Date Page Summary 0.10 2004.08.18 - First edition issued 1.00 2005.02.01 - It changed from FDTlight to flash programmer (Flash Developm ent Toolkit). The installation method changed, too. 1.10 2005.03.01 P4 Add accessory softwares to install[...]

R8C/15, R8C/17 StarterKit Tu t o r ia l Publication Date Rev.1.10 Mar 01, 2005 Published by: Renesas Solutions Corp. 4-1-6, Miyahara, Yodogawa-ku, Osaka City, 532-0003, Japa n ©2005 Rene sas Te chno logy Cor p. an d Rene sas Solu tion s Corp., Al l Righ ts Reser ved. Print ed in Jap an.[...]

Renesas Solutions Cor p. 4-1-6, Miyahara, Y odoga wa -ku, Osaka City , 532-0003, Japan R8C/15, R8C/17 S tarterKit Tu t o r i a l[...]