Runco Home Theater Projection System инструкция обслуживания

LS-12HBd High-Brightness, Active 3D Home Theater Projection System I NSTALLATION /O PERATION M ANUAL[...]

[...]

LightStyle™ LS-12HBd Instal lation/Operation Manual iii PRE L IMINAR Y RuncoCare™ S tandard Two Year Limited Warranty Congratulations o n your purchase of a Runco® product ! With proper installation, se tup and care, you should enjoy many yea rs of unpara lleled video p erformance. This Limited Warranty is provided fr ee of ch arge by Runc o I[...]

iv LightStyle™ LS-12HBd Inst allation/Ope ration Manual PRE L IMINAR Y • In the event of a product defec t, please follo w the claim pr ocedure provid ed below: A. Register your p roduct if you h ave not yet do ne so. Visit ht tp://www.run co.com/sup port/product -registration/ to register the p roduct. B. Contact your o riginal authorized de a[...]

LightStyle™ LS-12HBd Instal lation/Operation Manual v PRE L IMINAR Y 4. Damage, det erioration, or malfunction re sulting from: A. Accident, abus e, misuse, neg lect, improper ve ntilation, fire, w ater, disaster, lightning, or oth er acts of natur e, smoke exposure (cigarette or otherwise), unaut horized product mo dification (includin g use of [...]

vi LightStyle™ LS-12HBd Inst allation/Ope ration Manual PRE L IMINAR Y Runco offers e xtended and e xpanded servic e plans. For in formation on ad ditional produc t protection, p lease ask your authorized Run co dealer, e mail serviceor ders@runco. com or call (toll fr ee) (800) 23RUNCO (800-237-8626 ). RUNCO PROVIDES NO WARRANTIES, EXPRESS OR IM[...]

LightStyle™ LS-12HBd Instal lation/Operation Manual vii PRE L IMINAR Y Thank you fo r your purchase of this qualit y Runco video product! Fo r the best pe rformance, please read this m anual carefully as it is your guid e through the menus and ope ration. 1. Read th ese instruct ions. 2. Keep th ese instruction s. 3. Heed all warnings. 4. Follow [...]

viii LightStyle™ LS-12HBd In stallation/Ope ration Manual PRE L IMINAR Y Please read an d make sure you understand the following safety information before using the produc t for viewing 3D content. Provide this infor mation to the e nd users of th is product and ensure that the y understan d it. IMPORTANT HEALTH AN D SAFETY INFORMATION FOR 3D VIE[...]

LightStyle™ LS-12HBd Instal lation/Operation Manual ix PRE L IMINAR Y Manufacturer’s Name: Runco International, LL C Manufacture r’s Address: 119 5 NW Compton Dr ive, Beaverton, OR 97006-19 92 hereby declares that the Prod ucts’ Model Numbers: LS-12HBd conform with th e provisions of: Council Directive 2004/108/EC on Electromagnetic Compati[...]

x LightStyle™ LS-12HBd Inst allation/Operation M anual PRE L IMINAR Y NOTE: This equipment ha s been tested and found to comply with the limits for a Class B digita l device, pur suant to Part 15 of the FCC Rules. T hese limits ar e designed to p rovide reasonab le protection ag ainst harmful inter ference in a resid ential installation. This equ[...]

LightStyle™ LS-12HBd Instal lation/Operation Manual xi 1 Table of Content s PRE L IMINAR Y RuncoCare™ S tandard Two Year Limited Warran ty ........ ................... ................. ....... iii Important S afety In s truction s .......................... ................ ............. ................ ................ vii Compliance Informa[...]

Table of Contents xii LightStyl e™ LS-12HBd In stallation/Ope ration Manual PRE L IMINAR Y Other Cons iderations ..... ................ ............. ................ ................ ................ .......... 27 Installing the Optional Anamor phic Lens Mount ... ................................ ............. .......... 28 Package Cont ents .. [...]

Table of Contents LightStyle™ LS-12HBd Instal lation/Op erati on Manual xiii PRE L IMINAR Y Calibration .. ................ ................ ................ ................ ............. ................ ............. 73 Service ............. ............. ................ ................ ................ ................ ................. ...[...]

Table of Contents xiv LightStyle™ LS-12HBd In stallation/Operation Manual PRE L IMINAR Y Notes:[...]

LightStyle™ LS-12HBd Instal lation/Operation Manual xv 1 Li s t of Figure s PRE L IMINAR Y 2-1. LightStyle™ Seri es LS-12HBd Active 3 D Projection Syste m Block Diagram ......... ........ 5 2-2. LS-12H Bd Front/Side View ........................ ................ ............. ................ ................ ..... 6 2-3. LS-12HBd Rear/Bottom /[...]

List of Figures xvi LightStyle™ LS-12HBd In stallation/Operation Manual PRE L IMINAR Y 4-4. Typical Color Bar Patte rn for Adjusting Color Saturation and Tint ................ ................ 6 5 4-5. Typical Te st Pattern for Adjusting Sharpn ess .......... ................. ................ ................ ... 67 4-6. Overscan Modes .........[...]

Introd uction LightStyle™ LS-12HBd Instal lation/Operation Manual 1 PRE L IMINAR Y 1.1 About This Manual This Owner’s Ma nual describes how to install, set up and op erate the Runco LightStyle™ Series LS-12HBd Acti ve 3D Project ion System. Throughout t his manual, the Runco Li ghtStyle™ Seri es LS-12HBd Active 3D Proj ection System is refe[...]

Introduc tion 2 LightStyle™ LS-12HBd Inst allation/Operation M anual PRE L IMINAR Y Graphic Convention s : These symb ols appear in num erous places throughout the manual, to emp hasize points th at you must k eep in mind to a void problems wit h your equipment o r injury: 1.2 Using This Manual Use the following ta ble to locate the spec if ic in[...]

Introd uction LightStyle™ LS-12HBd Instal lation/Operation Manual 3 PRE L IMINAR Y 1.3 Description, Features and Benefits Runco’s LightStyle ™ Series LS-12HBd Active 3D Projection System delivers exception al 3D and 2D performa nce, sharing many of the technical attribu tes of the award-wi nning LightStyle™ projecto r series. Th e LS-12HBd [...]

Introduc tion 4 LightStyle™ LS-12HBd Inst allation/Operation M anual PRE L IMINAR Y Key Features and Benefits The LS-12HBd o ffers these key features and b enefits: • Native Resolution: 1920 x 108 0 (16:9 Native Aspect Ratio) • Three-chip Digita l Light Processing (D LP™) system • DisplayPort 1.1a Input (on Dimension Digita l Controller) [...]

System Overview LightStyle™ LS-12HBd Instal lation/Operation Manual 5 PRE L IMINAR Y A LightStyle™ Series L S-12HBd Active 3 D Projection System consists of the f ollowing component s: • The projector (equipped with dual digit al video inputs) with op tional anamorph ic lens and lens trans port assembly. • The DC-300 Dimens ion Digital Cont[...]

System Overview 6 LightStyle™ LS-12HBd Inst allation/Operation M anual PRE L IMINAR Y 2.1 Projector A LightStyle™ Serie s LS-12HBd Active 3D Projec tion System can display bo th traditional 2D and stereoscop ic 3D video content. An active 3D pr esentation requir es a specialized v ideo signal sour ce configurat ion and content to be displayed c[...]

System Overview LightStyle™ LS-12HBd Instal lation/Operation Manual 7 PRE L IMINAR Y •K E Y P A D Provides an alte rnative to using the remote co ntrol unit to pe rform primary le ns adjustments (focus, zo om and position). FOCU S , H/V , ZOOM Use these butt ons to select t he type of le ns adjustment you wish to m ake. The default function (fo[...]

System Overview 8 LightStyle™ LS-12HBd Inst allation/Operation M anual PRE L IMINAR Y Figure 2-3. L S -12HBd Re ar/Bottom/Top View • RUNCO LOGO BADGE • REAR COVER Remove to acce ss connectors . • LAMP MODULE COVER Remove this cover to acce ss the lamp compart ment. • CABLE OPENING Pass cables th rough this opening. • CEILING MOUNT HOLE [...]

System Overview LightStyle™ LS-12HBd Instal lation/Operation Manual 9 PRE L IMINAR Y 2.2 LS-12HBd Rear Panel Figure 2-4 shows the LS -12HBd rear pane l. Figure 2-4. L S -12HBd Rear Panel 1. R S 232 (Contr ol) A female, 9-pin D-su b connector that provides a serial communi cation link to the Dimension Digital Controller, via its Pri. Di s play Con[...]

System Overview 10 LightStyle™ LS-12HBd Inst allation/Ope ration Manual PRE L IMINAR Y 2.3 DC-300 Dimension Digital Controller The Dimension Dig ital Control ler provide s “left-e ye” and “ri ght-eye” vi deo sign als and the OSD menu to t he projector. It controls the other system c omponents in response to user input via the following in[...]

System Overview LightStyle™ LS-12HBd Instal lation/Operation Manual 11 PRE L IMINAR Y 6. DOWN BUTTON Use to direct-sele ct aspect rati os or move the menu cursor down in th e OSD. When no menu is present o n-screen, this button togg les through a spect ratios in the following order: 16:9 - 4:3 - Letterbo x - VirtualWide - Cinema - Virtu al Cinema[...]

System Overview 12 LightStyle™ LS-12HBd Inst allation/Ope ration Manual PRE L IMINAR Y Rear Panel Layout Figure 2-6 show s the rear connec tor pa nel on the Dimension Digital Controller. Figure 2-6. DC-300 Dimen s ion Digital Controller Rear Panel 1. MAIN POWER S WITCH Disconnects or applies power to the Dimension Digital Controlle r. 2. 3D S ync[...]

System Overview LightStyle™ LS-12HBd Instal lation/Operation Manual 13 PRE L IMINAR Y 11. Di s playPort DisplayPort 1.1a and DisplayPort-HDCP 1. 1 compliant, SD/HD input for connecting SDTV, EDTV or HDTV com ponent video sources. 12. HD1 / HD2 In (15-p in VGA) Two inputs for co nnecting stan dard-definit ion (SD = 480i/576i), enhanced-definition [...]

System Overview 14 LightStyle™ LS-12HBd Inst allation/Ope ration Manual PRE L IMINAR Y 2.4 LS-12HBd Remote Control Unit Figure 2-7 shows the LS-12 HBd remote contro l, and the paragr aphs that follow descr ibe its functionality. Figure 2-7. Dimen s ion Digital Controller Remo te Control Unit for L S -12HBd The LS-12HBd rem ote control un it suppo[...]

System Overview LightStyle™ LS-12HBd Instal lation/Operation Manual 15 PRE L IMINAR Y 1. IR OUTPUT INDICA TOR Lights when a button is pre ssed to indic ate that an IR signal is being transmitted. 2. OFF ( S tandard) / S leep Timer = 30 Minute s (Extended) Press to turn off the Dime nsion Digital Cont roller and proj ector. In extend ed mode, pres[...]

System Overview 16 LightStyle™ LS-12HBd Inst allation/Ope ration Manual PRE L IMINAR Y 5. Numeric Button s ( S tanda rd) Use these butt ons to enter numeric charac ters (0 ... 9) , such as wh en changing remote cont rol codes (re fer to Remote Control on page 83). Numeric Button s (Extended) In extended m ode, press a n umbered butt on to select [...]

System Overview LightStyle™ LS-12HBd Instal lation/Operation Manual 17 PRE L IMINAR Y 10. Cur s or Button s ( , , , ) Use these button s to select items or s ett ings, adjust settings or switch display patterns. When no menu is pre sent on-screen , the UP and DOWN but tons toggle throug h the available a spect ratio s, in this or der: UP Button =[...]

System Overview 18 LightStyle™ LS-12HBd Inst allation/Ope ration Manual PRE L IMINAR Y 14. 3D Mode S election Button s : 3D AUTO Press to set the 3D Mode to Auto . 3D S B S ( S ide-by- S ide) Press to set the 3D Mode to 3D S ide-by- S ide . 3D T AB (T op-and- Bottom) Press to set the 3D Mode to 3D T op-and-Bottom . 3D FP (Frame Packing) Press to [...]

Installation LightStyle™ LS-12HBd Instal lation/Operation Manual 19 PRE L IMINAR Y 3.1 Remote Control To install batteries in the remote co ntrol: 1. Press down the tab on the cover an d pull the cover in the dir ection of the ar row. 2. Insert the incl uded batteries. Ensure that t he polarities c orrectly m atch the and markings inside the ba t[...]

Installation 20 LightStyle™ LS-12HBd Inst allation/Ope ration Manual PRE L IMINAR Y 3.2 Quick Setup Table 3-1 gives a qui ck overview of the LS -12HBd install ation process. The sect ions following this one provid e detailed instructions. Table 3-1. In s tallation Overview S tep Procedure For Detail s , Refer to page... 1 Choose a location for th[...]

Installation LightStyle™ LS-12HBd Instal lation/Operation Manual 21 PRE L IMINAR Y 3.3 Installation Considerations Proper installation of you r projector will ensure the quality of yo ur display. Wheth er you are installing a pr ojector tempor arily or per manently, you should take th e following into account to ensure your p rojector perfo rms o[...]

Installation 22 LightStyle™ LS-12HBd Inst allation/Ope ration Manual PRE L IMINAR Y Throw Distance Throw distance is the distanc e measured from the front of the projector to the scre en. This is an impo rtant calculat ion in any pro jecto r installation as it de termines wheth er or not you have enough roo m to install your projector wit h a des[...]

Installation LightStyle™ LS-12HBd Instal lation/Operation Manual 23 PRE L IMINAR Y Table 3-3 lists th e available lens options for th e LS-12HBd and th eir associate d throw ratios. Vertical and Horizontal Position Proper placement of the projector relative to the screen will yield a rectangular , perfectly-centered image that completely fills th[...]

Installation 24 LightStyle™ LS-12HBd Inst allation/Ope ration Manual PRE L IMINAR Y Figure 3 -2. Projecto r Placemen t Vertical and Hori zontal Lens Shift You can use th e lens shift co ntrols to cen ter the image on the scre en. Lens shif t is generally exp ressed as a percent age of the screen heigh t or width, as show n in Figure 3-3 and Figur[...]

Installation LightStyle™ LS-12HBd Instal lation/Operation Manual 25 PRE L IMINAR Y Figure 3-4. Horizontal Le n s S hift (EXAMPLE ONLY) Vertical Len s S hift: The LS-12HBd zoom lens es (Proteus 2 t hrough 6) pro vide up to 65% of vertical le ns shift in either dire ction (up or down ). For example, w ith a 96 x 54-inch (16:9) screen, you can shift[...]

Installation 26 LightStyle™ LS-12HBd Inst allation/Ope ration Manual PRE L IMINAR Y Folded Optics In rear-scre en applications wh ere space be hind the project or is limited, a mi rror may be used to fold the optical path, as shown in Figure 3-5. T he position of the projector a nd mirror must be ac curately set. If you are considerin g this type[...]

Installation LightStyle™ LS-12HBd Instal lation/Operation Manual 27 PRE L IMINAR Y Audio/Video Synchronization Issues Due to its extraordinarily high level of video processing pe rfo rmance, the Dim ension Digital Controller may distribute video signals with a pe rceptible level of audio latency. In order to easily solve t his issue, Runco r ecom[...]

Installation 28 LightStyle™ LS-12HBd Inst allation/Ope ration Manual PRE L IMINAR Y 3.4 Installing the Optional Anamorphic Lens Mount If you are installing a standard LS-12HBd (without an anamorphic lens), skip this step and proceed with Mounting the LS-12HBd (page 33). If you are in stalling an LS-12H Bd with an an amorphic lens, p roceed as fol[...]

Installation LightStyle™ LS-12HBd Instal lation/Operation Manual 29 PRE L IMINAR Y Attaching the Tran s po rt A ss embly Attachme nt Plate: 1. Place the proje ctor upside do wn on a bla nket or other soft surface . 2. Position the atta chment pl ate as shown h ere. 3. If you are mounting the pr ojector on a ceiling: Line up the hol es on the Ceil[...]

Installation 30 LightStyle™ LS-12HBd Inst allation/Ope ration Manual PRE L IMINAR Y In s talling the Anamorphic Len s Tran s port A ss embly : After installing the Transpo rt Assembly Attachment Plate and Ceiling Mount Plate, proceed as follows to install the Anamorphic Lens Transport Assembly. 1. Do not use the mounting screws pr ovided with the[...]

Installation LightStyle™ LS-12HBd Instal lation/Operation Manual 31 PRE L IMINAR Y 1. Position the flat side of the motorized transpor t against the bottom side of the Attachment Plat e so that the center “M” hole in the Attach ment Plate is align ed with the front reces sed transport h ole. 2. Insert the #1 0-32 pivot screw up through the tr[...]

Installation 32 LightStyle™ LS-12HBd Inst allation/Ope ration Manual PRE L IMINAR Y Attaching the S ecurity Hook s : To help stabilize and support the added weig ht of the Anamorphic Lens and Le ns Transpor t Assembly, the a ttachment p late includes two security hooks and rela ted hardwar e for attach ing the front part of the p late to the ceil[...]

Installation LightStyle™ LS-12HBd Instal lation/Operation Manual 33 PRE L IMINAR Y 3.5 Mounting the LS-12HBd There are se veral methods fo r mounting t he projector. D epending on your chosen installation, one method may be more suit able than a nother. Floor Mounting (Upright) In typical front an d rear screen installa tions, the projec tor can [...]

Installation 34 LightStyle™ LS-12HBd Inst allation/Ope ration Manual PRE L IMINAR Y Adjusting the Projection Angle If the LS-12HBd is ceiling-mounted and the scre en is significantly lowe r than the pr ojector, you can tilt the projector at a slight angle by adjusting th e ceiling mount. The projector ca n be rotated ( side-to-side) up to 360 deg[...]

Installation LightStyle™ LS-12HBd Instal lation/Operation Manual 35 PRE L IMINAR Y 3.6 Mounting the Dimension Digital Controller The Dimension Di gital Control ler unit c an be plac ed on any fl at, stable su rface such as a shelf or table, or it can be rack-mounted u sing the supplie d mounting hard ware. Place it in a location t hat provides ea[...]

Installation 36 LightStyle™ LS-12HBd Inst allation/Ope ration Manual PRE L IMINAR Y 3.7 System Interconnections Proceed as follows to connect the LS-12HBd system compo nents to each other and to AC power. When connec ting your equipm ent: • Turn off all eq uipment before making any c onnections. • Use the cor rect signal cables for each sourc[...]

Installation LightStyle™ LS-12HBd Instal lation/Operation Manual 37 PRE L IMINAR Y Figure 3-9 shows how to conn ect the Dimension Digital Cont roller to the projecto r. Figure 3-9. Connect ing the Dimen s ion Digit al Controller to the Projector RS232 RS232 PRIMARY PRIMARY SECONDARY SECONDARY 3D Sync Out 3D Sync Out Video 1 Y Video 2 Video 3 Pr P[...]

Installation 38 LightStyle™ LS-12HBd Inst allation/Ope ration Manual PRE L IMINAR Y Connecting an Audio Processor or Secondar y Display Device to the Dimension Digital Controller (Optional) The Dimension Digital Controller provides a seco nd HDMI output (labeled HD MI Out (Audio Only) ) for connectio n to an audio r eceiver/switching sys tem or s[...]

Installation LightStyle™ LS-12HBd Instal lation/Operation Manual 39 PRE L IMINAR Y Additional Connections to the Dimension Digital Controller (Optional) The Dimension Di gital Control ler provide s the followi ng interf aces to exter nal equipmen t that allow it to control or be controlled by tha t equipment: • An RS-232 interface to a PC or co[...]

Installation 40 LightStyle™ LS-12HBd Inst allation/Ope ration Manual PRE L IMINAR Y Connecting 12-volt Trigger Output s to External Equipment: If your LS-12HBd is equipped with a n anamorphic lens, c onnect the +12V T rigger Input on the lens transport to a 12-volt trigger ou tput on the Dimension Dig ital Controller; see Figure 3- 12. Similarly [...]

Installation LightStyle™ LS-12HBd Instal lation/Operation Manual 41 PRE L IMINAR Y Connecting an External IR Receiver to th e Dimen s ion Digital Controller: If infrared signals from th e remote cont rol cannot reach the Dim ension Digital Con troller due to excessive dista nce or obstr uctions such a s walls or cabinet d oors, you can connect an[...]

Installation 42 LightStyle™ LS-12HBd Inst allation/Ope ration Manual PRE L IMINAR Y Ethernet Network Connection: Use a standard, Cat egory 5 netw ork cable with an RJ-45 plug to connect a ne twork hub, rou ter or gatewa y to the Ethern et port on t he Dimension Digita l Controller; see Figure 3 -14. Figure 3-14. Ethernet Ne twork Connection to Di[...]

Installation LightStyle™ LS-12HBd Instal lation/Operation Manual 43 PRE L IMINAR Y Connecting Source Components to the Dimension Digital Controller Connect your video sources to the Dimensio n Digital Contro ller as shown an d describe d in the sections that follow. Di s playPort S ource Connection: See Figure 3-15. Figure 3-15. Di s pla yPort S [...]

Installation 44 LightStyle™ LS-12HBd Inst allation/Ope ration Manual PRE L IMINAR Y HDMI S ource Connection s : See Figure 3-16. Figure 3-16. HDMI S ource Conn ection s Use the HDMI inpu ts whenever possib le. This ensure s the highest video quality because the sign al is carried in the digital domain throughout the entire sign al path, from so u[...]

Installation LightStyle™ LS-12HBd Instal lation/Operation Manual 45 PRE L IMINAR Y Compone nt Video S ource Connection s : Connect your componen t video sources to the HD1, HD2 a nd/or Compo nent/SCART inputs as shown in Figur e 3-17. Figure 3-17. Compone nt Video S ource Connection s USB T o Accessory Box Video 1 Y Video 2 Video 3 Pr Pb HDMI 1 H[...]

Installation 46 LightStyle™ LS-12HBd Inst allation/Ope ration Manual PRE L IMINAR Y RGBHV S ource Connection s : Connect personal computer s and/or othe r RGB sources to the HD1 and/or HD2 inputs as shown in Figur e 3-18. Figure 3-18. RGBHV S ource Conne ction s Video 1 Y Video 2 Video 3 Pr Pb Component / SCART TRIGGERS 12 3 HD1 3D SYNC HD2 Displ[...]

Installation LightStyle™ LS-12HBd Instal lation/Operation Manual 47 PRE L IMINAR Y S CART RGB S S ource Connection s : Connect the gre en, blue a nd red outp uts from your SCART source to the Compo nent/SCART input on the Dimension Digita l Controller. Connect the sync output from your SCART source to the Vi d eo 1 input on the Dimension Digital [...]

Installation 48 LightStyle™ LS-12HBd Inst allation/Ope ration Manual PRE L IMINAR Y Compo s ite S ource Connection s : Se e Figure 3-20 . Figure 3-20. Co mpo s ite Video S ource Connec tion s USB Video 1 Y Video 2 Video 3 Pr Pb HDMI 1 HDMI 2 Component / SCART TRIGGERS 12 3 HD1 3D SYNC HD2 DisplayPor Y Pr P b US B H DMI 1 HDMI 2 T R I GG ER S 12 3[...]

Installation LightStyle™ LS-12HBd Instal lation/Operation Manual 49 PRE L IMINAR Y Connecting the Active 3D Emitter to the Dimension Digital Controller Connect the 3D S YNC Out port o n the emitter to the 3D S ync Out connector on the Dimension Digital Controller, as shown in Fig ure 3-21. Moun t the emitter in a location th at provides a clear l[...]

Installation 50 LightStyle™ LS-12HBd Inst allation/Ope ration Manual PRE L IMINAR Y 3.8 Turning on the Power 1. Power up your sour ce compo nents. 2. Turn on the m ain power swit ch at the rear of the Dimension Digital Contro ller. 3. Press the ON button on the re mote contro l (or the ON/ S TA N D B Y ( ) button on the Dimension Digita l Control[...]

Installation LightStyle™ LS-12HBd Instal lation/Operation Manual 51 PRE L IMINAR Y 3.9 Primary Lens Adjustments: Focus, Zoom and Position Lens zoom, fo cus and po sition are mo torized adjust ments that ar e adjustable using the remote contro l (Figure 2-7). This allows yo u to adjust the focus and image size while at th e screen for more accur a[...]

Installation 52 LightStyle™ LS-12HBd Inst allation/Ope ration Manual PRE L IMINAR Y 3.11 Adjusting the Image Geometry Projector and /or screen p lacement — a mong othe r things — c an cause geom etric distortion in the projected image. To correct this, the Dimens ion Digital Cont roller provides precise, nine-po int control ov er the project [...]

Installation LightStyle™ LS-12HBd Instal lation/Operation Manual 53 PRE L IMINAR Y “Keystoning” u sually occurs wh en the projec tor is tilted relative to th e screen. “Pincushion” distortion can sometimes occu r if the throw distance is very short and/or the projector is equipped wi th an anamorp hic lens. To correct keystoning or pincus[...]

Installation 54 LightStyle™ LS-12HBd Inst allation/Ope ration Manual PRE L IMINAR Y 3.12 Installing and Adjusting the Anamorphic Lens If you are in stalling an LS-12H Bd with an an amorphic lens, p roceed as follow s to install and adjust the lens. Attach the an amorphic le ns to the br acket using the plastic knobs s upplied with the lens. See F[...]

Installation LightStyle™ LS-12HBd Instal lation/Operation Manual 55 PRE L IMINAR Y 6. Select th e Cinema aspect ra tio to move the an amorphic lens int o position, if it isn’t already. To do this, press CINEMA on the Dimensio n Digital Controller re mote contro l (Figure 2-7), or press or repeatedly with no menus visible on-scr een. Adju s ting[...]

Installation 56 LightStyle™ LS-12HBd Inst allation/Ope ration Manual PRE L IMINAR Y Note s :[...]

Operation LightStyle™ LS-12HBd Instal lation/Operation Manual 57 PRE L IMINAR Y 4.1 Using the On-Screen Menus To display t he Main Menu , press the MENU button on the remote co ntrol or Dimension Digital Controlle r front panel (F igure 2-5). To select a m enu item, use the and buttons on the remote con trol or Dimension Digital Controlle r front[...]

Operation 58 LightStyle™ LS-12HBd Inst allation/Ope ration Manual PRE L IMINAR Y Figure 4-1. L S -12HBd O S D Menu S tructur e (cont inued) S ervice Test Vide o Color Bars 1 Color Bars 2 Focus Grey Bars Full White Primary / Second ary / Dual Alignment 3D Input Names Rename/Resto re Remote Contr ol Remote Code 00000 ... 08209 ... 65535 or 8899 9 ([...]

Operation LightStyle™ LS-12HBd Instal lation/Operation Manual 59 PRE L IMINAR Y Main Menu The Main Menu is the startin g point for accessing all Dimension Digital Controller functi ons. (You must enter a passcode to access the Calibr ation and Se rvice menus.) Input Source From the M ain Menu, selec t Input Sou rce to choose a video signal so urc[...]

Operation 60 LightStyle™ LS-12HBd Inst allation/Ope ration Manual PRE L IMINAR Y Aspect Ratio To change the asp ect ratio (size and shape) of the proj ected image, select Aspect Ratio from the Main Menu and press ENTER . Select the appropr iate aspect ra tio for your screen size and the t ype of program mate rial being viewed; refer t o Table 4-1[...]

Operation LightStyle™ LS-12HBd Instal lation/Operation Manual 61 PRE L IMINAR Y Letterbox LET BOX Letterbox mode scales (zooms in on) a 4:3 image linearly (by the same amount on al l sides) to fill a 16:9 display. Letterbox is best suited for viewing LaserDisc movies or non-anamorphi c DVDs on a 16:9 screen. VirtualWide V-WIDE VirtualWide scales [...]

Operation 62 LightStyle™ LS-12HBd Inst allation/Ope ration Manual PRE L IMINAR Y Screen The Screen Menu allows you to recall multiple sets of stored values for ce rtain controls (Output Shift, Image Alignment and Screen Masking) th at are saved for each a spect ratio. Such settings are al so saved “per screen.” To recall the Outp ut Shift and[...]

Operation LightStyle™ LS-12HBd Instal lation/Operation Manual 63 PRE L IMINAR Y Picture Use the controls in the Pict ure Menu to calibrat e each Dimension Digit al Controller input to achieve optimu m picture quality. The Dimension Di gital Control ler has b een designed t o incorpor ate setup and calibra tion standards establi shed by the Imagin[...]

Operation 64 LightStyle™ LS-12HBd Inst allation/Ope ration Manual PRE L IMINAR Y Brightne ss : On your external te st pattern sour ce, select a PLUG E pattern. (PLUGE is an acronym for “Pictur e Line-Up Generat ion Equipment.”) Figur e 4-2 shows a typical PLUGE pattern. Figure 4-2 . Typical PLUG E Pattern for Adju s ting Brightne ss PLUGE pat[...]

Operation LightStyle™ LS-12HBd Instal lation/Operation Manual 65 PRE L IMINAR Y Contra s t: On your exte rnal test patte rn source, selec t a stepped, gray-bar pattern like the one shown in F igure 4-3. Figure 4-3. Typical Gray Bar Pattern for Adju s ting Contra s t Select Contrast and press ENTER . Adjust the cont rast to a po int just below whi[...]

Operation 66 LightStyle™ LS-12HBd Inst allation/Ope ration Manual PRE L IMINAR Y 5. Press ENTER agai n to select Co nfigure. 6. Select Diagnostics and pr ess ENTER . 7. Select Blue from the Diagnostics menu, then press ENTER t o display only the blue color channel. 8. Press EXIT (or MENU ) repeatedly to return to the Main Menu. 9. Select Picture [...]

Operation LightStyle™ LS-12HBd Instal lation/Operation Manual 67 PRE L IMINAR Y S harpne ss : “Sharpness” is the a mount of high-fre quency detail in the image . To adjust sharpness, select Sharpness from t he Picture menu and press ENTER . On your extern al test pattern source, select a pattern like the one shown in Figure 4-5. Adju st as ne[...]

Operation 68 LightStyle™ LS-12HBd Inst allation/Ope ration Manual PRE L IMINAR Y Input Position Use the contro ls in the Input Po sition Menu to fine-tun e the aspect ra tio and image position for the current source. Left/Right: Select Left/Right from the Input Positio n menu to shift t he projected im age horizontally. Press to shift th e image [...]

Operation LightStyle™ LS-12HBd Instal lation/Operation Manual 69 PRE L IMINAR Y Figure 4-6. Over s can Mode s Pha s e (RGB, Component or S CART s ource s ): This control adju sts the phase of the pixel sampling cloc k relative to the in coming signal. Adj ust the phase when an RGB, Component or SCART image still shows shimme r or “noise” afte[...]

Operation 70 LightStyle™ LS-12HBd Inst allation/Ope ration Manual PRE L IMINAR Y Memory Presets For each input , the Dimension Digital Contro ll er lets you save imag e quality settings as presets that you can recall at a later time. You can create up to f our presets per input an d display mode (resolution and frame rate). The Dimension Digit al[...]

Operation LightStyle™ LS-12HBd Instal lation/Operation Manual 71 PRE L IMINAR Y To reset the Cu stom 1 or Cu stom 2 memo ry preset to its fa ctory-default sta te, select it, press or to highlight Re set and press ENTER . 3D Processing Select 3D Proce ssing from the M ain Menu to set t he following options related t o formatting and delivery of HD[...]

Operation 72 LightStyle™ LS-12HBd Inst allation/Ope ration Manual PRE L IMINAR Y Sleep Timer Select Sleep Time r from the Main M enu to turn off the LS-12HBd afte r a specified int erval. Press or to select Off, 30 Minutes, 60 Minutes, 90 Minutes, 2 Hours or 4 Hours. Then, press ENTER. Information S ignal / S y s tem: Select Infor mation from th [...]

Operation LightStyle™ LS-12HBd Instal lation/Operation Manual 73 PRE L IMINAR Y Calibration Use the Calibrat ion menu to per form advanced picture quality ad justments. Th i s menu s hould be u s ed by I S F-certified technician s only . To recall the ISF N ight or ISF Day se ttings, select “ISF N ight” or “ISF Day” fr om the Memory Prese[...]

Operation 74 LightStyle™ LS-12HBd Inst allation/Ope ration Manual PRE L IMINAR Y • Color Temp: Select Color Temp from the Display Colo r - Common Settings menu to adjust the co lor temper ature. Colo r temperat ure establishes t he “color of g ray” by adjusting th e 75% white po int to various color points . What are “color point s ?” A[...]

Operation LightStyle™ LS-12HBd Instal lation/Operation Manual 75 PRE L IMINAR Y Table 4-2 lists the x- and y-coordina tes for each color temperatur e preset in “Simple” mode. • Color Gamut: Select Color Gamut from the Display Color - Common Set tings menu to select a color gam ut (range) that may be diffe rent from the defaul t color gamut.[...]

Operation 76 LightStyle™ LS-12HBd Inst allation/Ope ration Manual PRE L IMINAR Y Table 4-3 lists th e Color Gamut se ttings and asso ciated x- and y-coord inates for eac h primary and secondary co lor compon ent. •P C E : To use th e Personal Color Equalizer to defin e a custom colo r gamut, ch oose the “PCE” Color Gam ut setting (refer to [...]

Operation LightStyle™ LS-12HBd Instal lation/Operation Manual 77 PRE L IMINAR Y The Auto Color Enable and Te s t Patter n Enable c heckboxes let you choose what to display on-scree n while making t hese adjustment s. These contr ols work together as follows: • YCM (Yellow, Cyan, Magenta): To precisely adjust the secondary color poin ts associat[...]

Operation 78 LightStyle™ LS-12HBd Inst allation/Ope ration Manual PRE L IMINAR Y Input Image: The Input Imag e controls ar e functionally similar t o those in the Picture menu (refer to page 63), bu t are accessible only by entering the Calibration me nu passcode. Input Color: The Inp ut Color cont rols are similar t o those in the Display Color [...]

Operation LightStyle™ LS-12HBd Instal lation/Operation Manual 79 PRE L IMINAR Y Copy/Pa s te - Memory Pre s et: You can copy and paste settings from on e memory preset to an other. This gives you a convenient star ting point for c reating a new preset based on an existing one , to make the c alibration pro cess less time-consu ming. For example, [...]

Operation 80 LightStyle™ LS-12HBd Inst allation/Ope ration Manual PRE L IMINAR Y •A s pect Ratio - Pa s te S etting s : To apply the Output Shift, Image Alignment a nd Screen Masking se ttings on the clipboard to a different aspec t ratio and/or screen, do either of the followin g: • Switch to an other asp ect ratio (for exa mple, from 16 :9 [...]

Operation LightStyle™ LS-12HBd Instal lation/Operation Manual 81 PRE L IMINAR Y • S pla s h Enable: When you have fin ished customizing the splash scre en, select Splas h Enable from th e Splash Configu re menu. Th en, select On a nd press ENTER . O S D Po s ition: To adjust the position of the OSD, select OSD Positio n from the Calibratio n me[...]

Operation 82 LightStyle™ LS-12HBd Inst allation/Ope ration Manual PRE L IMINAR Y Press MENU to exit test pattern mode. Grey Bar s Use this pattern when making brightness, contrast or white balance (gai n/offs et) adjustments. Full White Use this pattern when measuring or adjusting brightness, contrast or white balance (gain/offset). Primary Align[...]

Operation LightStyle™ LS-12HBd Instal lation/Operation Manual 83 PRE L IMINAR Y Input Name s : You can give each input a descriptive name . For example, y ou may want to change th e default input name to the type of source compo nent connec ted to it: “VCR,” “DVD,” “Laptop” et cet era. Input na mes can be u p to 12 chara cters long. T[...]

Operation 84 LightStyle™ LS-12HBd Inst allation/Ope ration Manual PRE L IMINAR Y When you change th e Remote Code on the Dimensio n Digital Contr oller, you must re-program th e Dimension Digita l Controller r emote control to se nd that same code. T o enable “extended” key code mode, you must re-pro gram the Dimension Digital Controller rem [...]

Operation LightStyle™ LS-12HBd Instal lation/Operation Manual 85 PRE L IMINAR Y To change a but ton assignment, select the co rresponding entr y in the SRC 1-7 Keys o r SRC 8-14 Keys sub-m enu. Then, cho ose the source input you wish t o assign to that button. Di s play Device - Config ure: The options in the Display Device - Config ure menu allo[...]

Operation 86 LightStyle™ LS-12HBd Inst allation/Ope ration Manual PRE L IMINAR Y •D i s play 3D S etting s : The Display 3D Settings me nu is not applicab le to the LS-12HBd. • Internal 3D S etting s : Select Intern al 3D Settings from th e Display Device - Config ure menu to adju st the followin g timing settings f or the Dime nsion Digital [...]

Operation LightStyle™ LS-12HBd Instal lation/Operation Manual 87 PRE L IMINAR Y • Default Gateway: Select Defau lt Gateway from the IP Config uration men u to manually config ure the defau lt IP gateway. Th e procedure is similar to that for setting the IP address. • Communication T e s t: Select Commun ication Test fr om the IP Con figuratio[...]

Operation 88 LightStyle™ LS-12HBd Inst allation/Ope ration Manual PRE L IMINAR Y • E-Mail Notification: Select E-Mail Notification from th e Network menu to specify when and to whom the Dime nsion Digital Co ntroller sends err or and service notification messages via e-mail. The notification m essages are in th e following form at: To: [E-Mail [...]

Operation LightStyle™ LS-12HBd Instal lation/Operation Manual 89 PRE L IMINAR Y • Periodic S ervice Notification: You can have the Dimens ion Digital Con troller send periodic rem inders via e-mail to perform reg ular maintenance tasks. To do this: 1. Select Periodic Service Notification from the E-Mail Notification m enu. 2. Highlight Enable a[...]

Operation 90 LightStyle™ LS-12HBd Inst allation/Ope ration Manual PRE L IMINAR Y • Remote Network Control: Select Remote Network Control from the N etwork menu to enable or d isable control of t he Dimension Digital Co ntroller via an IP connection (typically usin g a web brows er). Set it to On to allow all incom ing remote n etwork connectivi[...]

Operation LightStyle™ LS-12HBd Instal lation/Operation Manual 91 PRE L IMINAR Y Mi s cellaneou s : Select Miscellaneou s from the Service menu to set the following options: • Langu age: Select Language from the Miscellane ous menu an d press the u p- or down-arrows to select the OSD La nguage (English, F rançais, Deutsch, It aliano, Español, [...]

Operation 92 LightStyle™ LS-12HBd Inst allation/Ope ration Manual PRE L IMINAR Y HDMI: Select H DMI from th e Service me nu to set the following options affect ing communication between HDMI sources, the Dime nsion Digital Controller and the LS-12HBd. • HDMI EDID Exten s ion: Exten ded display identifica tion data (EDID) is a data struct ure pr[...]

Operation LightStyle™ LS-12HBd Instal lation/Operation Manual 93 PRE L IMINAR Y • Logo LED: Select Logo LED fr om the Front Pa nel Brightne ss menu to adjust the brightness of the larg e, illuminated logo on the le ft side of the display. The rang e is from 0 (off) to 31. • S tandby LED: Select Standby LED fro m the Front Panel Brigh tness me[...]

Operation 94 LightStyle™ LS-12HBd Inst allation/Ope ration Manual PRE L IMINAR Y 4.2 Using the 3D Glasses The 3D LCD Shutte r Glasses functio n with the Runco Ac tive 3D Emitter and the p rojector to provide unsurpassed 3D st ereosco pic viewing. This s ection describe s the feature s, connection, setup and op eration of the 3D LCD Shutter Glasse[...]

Operation LightStyle™ LS-12HBd Instal lation/Operation Manual 95 PRE L IMINAR Y Charging the Batte ry The glasses must be fully ch arged before first use and whenever the Battery Status LED flashes red once every couple of seconds. The glasses will charge a completely dead battery in ap proximately five ho urs. You ma y use the glasses while the [...]

Operation 96 LightStyle™ LS-12HBd Inst allation/Ope ration Manual PRE L IMINAR Y Turning On the Glasses 1. Ensure that the projec tor is powered on and display ing 3D cont ent. 2. Press and hold the Po wer Button for abou t two seconds, th en release the butt on. The LED will then blink in a pattern that in dicates the battery char ge state. In g[...]

Maintenance and Troubleshooting LightStyle™ LS-12HBd Instal lation/Operation Manual 97 PRE L IMINAR Y 5.1 Lamp Replacement The lamp should be replac ed when it rea ches the end of its life (typ ically 2,000 hou rs), or sooner if a no ticeable degr adation in br ightness occur s. Keep track of the number o f hours the lamp has been in use and be a[...]

Maintenance and Troublesh ooting 98 LightStyle™ LS-12HBd Inst allation/Ope ration Manual PRE L IMINAR Y 5.2 Troubleshooting Tips Table 5-1 provide s some general guideline s for troubleshooting pr oblems you may encounter w ith the LS-1 2HBd. If the su ggested solutions fail to resolve th e problem or if you encounter an issue not desc ribed here[...]

Maintenance and Troubleshooting LightStyle™ LS-12HBd Instal lation/Operation Manual 99 PRE L IMINAR Y The display is jittery or unstable. • Poor-quality or improperly connected source. • The horizontal or vertical scan frequency of the input signal may be out of range for the projector. • Ensure that the source is properly connected and of [...]

Maintenance and Troublesh ooting 100 LightStyle™ LS-12HBd Inst allation/Operation M anual PRE L IMINAR Y The projector does not turn on or respond to user com- mands. The vacuum fluores- cent display on the Dimension Digital Contro ller front panel displays the following mes- sage: Primary Display Error Communication Failure • The serial connec[...]

LightStyle™ LS-12HBd Instal lation/Operation Manual 101 PRE L IMINAR Y In addition to using the Dimension Digital Controller fron t-panel keypad or rem ote control unit, there ar e three metho ds of contro lling the LS-12H Bd and Dime nsion Digital Controller exte rnally: • Using a serial (R S-232) link to sen d ASC II commands and receive resp[...]

External Control 102 LightStyle™ LS-12HBd Inst allation/Operation M anual PRE L IMINAR Y • y is the operand, which can have one of the followi ng values: ? = “Get” operan d + = “Increment ” operand = = “Set” operan d - = “Decrement” oper and • z is the value to set for this parameter. It can have one of two formats: • Intege[...]

External Control LightStyle™ LS-12HBd Instal lation/Operation Manual 103 PRE L IMINAR Y Command and Response Examples Here are som e examples of serial comman ds and their responses: Serial Command List Table 6-1 lists all supported commands. Command Command Data Re s pon s e Power query when unit is powered on (PWR?) [CR] (0;PWR=1) [CR] Set powe[...]

External Control 104 LightStyle™ LS-12HBd Inst allation/Operation M anual PRE L IMINAR Y Aspect Ratio Copy ARC W No N/A N/A No Action will be performed on any setting value Aspect Ratio Paste ARP W No N/A N/A N o PCE Red x ARX R/W Y es -100 100 No PCE Red y ARY R/W Yes -100 100 No Aspect Ratio ASP R/W No 0 6 No 0 = 4:3 1 = 16:9 2 = Letterbox 3 = [...]

External Control LightStyle™ LS-12HBd Instal lation/Operation Manual 105 PRE L IMINAR Y Image Alignment Center x CNX R/W Yes -100 100 No Image Alignment Center y CNY R/W Yes -100 100 N o Contrast CON R/W Yes -50 50 No Calibration -> Input Image menu Contrast Offset COO R/W Yes -50 50 No Picture menu Color Temp Simple CTS R/W No 0 4 No 1 = 5500[...]

External Control 106 LightStyle™ LS-12HBd Inst allation/Operation M anual PRE L IMINAR Y Error Code ERR R No 0 No 0 = None 1 = Display Lamp Overtemp 2 = Display Ballast Overtemp 3 = Display Fan Ini t Failure 4 = Display Fan 1 Failure 5 = Display Fan 2 Failure 6 = Display Fan 3 Failure 7 = Display Fan 4 Failure 8 = Display Fan 5 Failure 9 = Displa[...]

External Control LightStyle™ LS-12HBd Instal lation/Operation Manual 107 PRE L IMINAR Y HDMI Audio Format HAF R/W No 0 3 No 0 = Combined 1 = HDMI Out (Pri. Display) 2 = HDMI Out (Sec. Display) 3 = HDMI Out (Audio Only) HDMI EDID Extension 1 HDMI EDID Extension 2 HDMI EDID Extension 3 HDMI EDID Extension 4 HDMI EDID Extension 5 HDMI EDID Extension[...]

External Control 108 LightStyle™ LS-12HBd Inst allation/Operation M anual PRE L IMINAR Y Information Firmware Version IFV R No N/A N/A Yes Input Green Gain IGG R/W Yes -32 32 No Input Green Offset IGO R/W Yes -32 32 No Information Horizontal Frequency IHF R No N/A N/A Yes Information Input Resolution IIR R No N/A N/A Yes Information Input FPGA Ve[...]

External Control LightStyle™ LS-12HBd Instal lation/Operation Manual 109 PRE L IMINAR Y Information Sync Type IST R No 0 3 No 0 = None 1 = Separate 2 = Composite 3 = Sync-on-g reen Information Vertical Frequency IVF R No N/A N/A Y es Remote Key KEY W No 0 85 No 1 = On 2 = Off 3 = Menu 4 = Enter 5 = Up 6 = Down 7 = Left 8 = Right 9 = 16:9 10 = 4:3[...]

External Control 110 LightStyle™ LS-12HBd Inst allation/Operation M anual PRE L IMINAR Y Remote Key Repeat (cont.) KRT W No 0 85 No 64 = Keypad Menu (used internally) 65 = Power Toggle (used internally) 66 = Enter Key Up (used in ternally) 67 = SRC 1 68 = SRC 2 69 = SRC 3 70 = SRC 4 71 = SRC 5 72 = SRC 6 73 = SRC 7 74 = SRC 8 75 = SRC 9 76 = SRC [...]

External Control LightStyle™ LS-12HBd Instal lation/Operation Manual 111 PRE L IMINAR Y Display Serial Number LSN R No N/A N/A Yes Model Name MDL R No N/A N/A Yes Memory Preset MMP R/W No 0 3 No 0 = ISF Night 1 = ISF Day 2 = Custom 1 3 = Custom 2 Memory Preset Copy MPC W No N/A N/A No Action will be performed on any setting value Memory Preset Pa[...]

External Control 112 LightStyle™ LS-12HBd Inst allation/Operation M anual PRE L IMINAR Y Programmable Source Key [1 ... 14] P01 P02 P03 P04 P05 P06 P07 P08 P09 P10 P11 P12 P13 P14 R/W No 0 15 No 0 = Composite 1 1 = Composite 2 2 = Composite 3 3 = Component 4 = HD 1 5 = HD 2 6 = SCART 7 = HDMI 1 8 = HDMI 2 9 = HDMI 3 10 = HDMI 4 11 = HDMI 5 12 = H[...]

External Control LightStyle™ LS-12HBd Instal lation/Operation Manual 113 PRE L IMINAR Y Input Name 1 Restore R01 W No N/A N/A No Action will be performed on any setting value Input Name 2 Restore R02 W No N/A N/A No Input Name 3 Restore R03 W No N/A N/A No Input Name 4 Restore R04 W No N/A N/A No Input Name 5 Restore R05 W No N/A N/A No Input Nam[...]

External Control 114 LightStyle™ LS-12HBd Inst allation/Operation M anual PRE L IMINAR Y Screen Masking Left SML R/W Yes 0 200 No Screen Masking Test Pattern Mode Enable SMM R/W No 0 1 No 0 = Off; 1 = On Screen Masking Right SMR R/W Yes 0 200 No Screen Masking Top SMT R/W Yes 0 200 No Splash Enable SPE R/W No 0 1 No 0 = Off; 1 = On Splash Timer S[...]

External Control LightStyle™ LS-12HBd Instal lation/Operation Manual 115 PRE L IMINAR Y Trigger 1 16:9 T11 R/W No 0 1 No 0 = Off; 1 = On Trigger 1 4: 3 T12 R/W No 0 1 No Trigger 1 Letterbox T13 R/W No 0 1 No Trigger 1 VirtualWide T14 R/W No 0 1 No Trigger 1 Cinema T1 5 R/W No 0 1 No Trigger 1 Virtual Cinema T16 R/W No 0 1 No Trigger 1 Native T17 [...]

External Control 116 LightStyle™ LS-12HBd Inst allation/Operation M anual PRE L IMINAR Y Test Pattern Enable TPE R/W No 0 1 No 0 = Off; 1 = On Primary Test Pattern TPP R/W No 0 1 N o 0 = Off; 1 = On Secondary Test Pattern TP S R/W No 0 1 No 0 = Off; 1 = On Tracking TRK R/W Yes -100 100 No Image Alignment Top Right x TRX R/W Yes -100 1 00 No Image[...]

External Control LightStyle™ LS-12HBd Instal lation/Operation Manual 117 PRE L IMINAR Y 6.2 Using Discrete IR Codes The Dimension Dig ital Controller accep ts commands in the for m of IR signals that confor m to the NEC protocol. Each Dime nsion Digital Controller remote cont rol button has an NEC control code a ssociated with it. You can use the[...]

External Control 118 LightStyle™ LS-12HBd Inst allation/Operation M anual PRE L IMINAR Y IR Command List (Standard Mode) Table 6-2 lists the NEC control co des for the Dimension Digi tal Controller. ➤ Table 6-2. NEC Control Code s for the Dimen s ion Digital Controller ( S tandard Mode) Remote Control Button Name Addre ss Data NEC Data From Rem[...]

External Control LightStyle™ LS-12HBd Instal lation/Operation Manual 119 PRE L IMINAR Y Right 8209 29 0x20111DE2 Right-Arrow ( ) Down 8209 30 0x20111EE1 Down-Arrow ( ) Left 820 9 31 0x20111FE0 Left-Arrow ( ) ENTER 8209 32 0x201120DF ENTER SRC 1 820 9 33 0x201121DE Video Source 1 SRC 2 820 9 34 0x201122DD Video Source 2 SRC 3 820 9 35 0x201123DC V[...]

External Control 120 LightStyle™ LS-12HBd Inst allation/Operation M anual PRE L IMINAR Y COMP 8209 72 0x201148B7 Component v ideo input HD 1 82 09 73 0x201149B6 HD1 video input HD 2 82 09 74 0x20114AB5 HD2 video input HDMI 1 8209 75 0x2 0114BB4 HDMI1 video input HDMI 2 8209 76 0x2 0114CB3 HDMI2 video input HDMI 3 8209 77 0x2 0114DB2 HDMI3 video i[...]

External Control LightStyle™ LS-12HBd Instal lation/Operation Manual 121 PRE L IMINAR Y IR Command List (Extended Mode) Table 6-3 lists th e Extended-mode N EC control cod es for the Dimens ion Digital Controller. To use the rem ote control unit in extended m ode, set the address code to 88999 (refer to Remote Control on page 83 ). Table 6-3. NEC[...]

External Control 122 LightStyle™ LS-12HBd Inst allation/Operation M anual PRE L IMINAR Y 6.3 Using HDMI CEC Messages The Dimension Digital Contro ller accepts and can resp ond to CEC command messag es from a disc player, satellite receiver or DVR/set-top box via an HDMI connection. Using CEC, the Dimension Digital Controlle r can pe rform the fo [...]

External Control LightStyle™ LS-12HBd Instal lation/Operation Manual 123 PRE L IMINAR Y Set Menu Language 0x32 – √ Give Physical Address 0x83 – √ Set Stream Path 0x86 – √ Get CEC Version 0x9F – √ Abort Message 0xFF – √ User Control Pressed 0x44 – √ User Control Released 0x45 – √ Give OSD Name 0x46 – √ Menu Request [...]

External Control 124 LightStyle™ LS-12HBd Inst allation/Operation M anual PRE L IMINAR Y Note s :[...]

Specifications LightStyle™ LS-12HBd Instal lation/Operation Manual 125 PRE L IMINAR Y 7.1 LS-12HBd Projector Specifications Table 7-1 lists the LS-12HBd p rojector specifi cations. 7. S pecification s Table 7-1. L S -12HBd Projector S pecification s Projector Type: Digital Light P rocessing™ (DLP ), 3-chi p, 16:9 Supe rOnyx™ DMD™ Native Re [...]

Specifications 126 LightStyle™ LS-12HBd Inst allation/Operation M anual P RELI M INARY Len s S y s tem: Motorized focus, zoom and position controls Refre s h Rate: 24 Hz, 50 Hz or 60 Hz (2D content) 100 Hz or 120 Hz (3D content) 3D Technology: Frame sequentia l, active shutt er Power Requirement s : 10 0 to 240 VAC (auto-sensing), 50 /60 Hz, 400 [...]

Specifications LightStyle™ LS-12HBd Instal lation/Operation Manual 127 PRE L IMINAR Y 7.2 Dimension Digital Controller Specifications Table 7-2 lists the Dimension Digit al Controller spec ifications. Table 7-2. Dimen s ion Digital Controller S pecification s A s pect Ratio s : 4:3, Letterbox, 16:9, VirtualW ide, Cine ma, Virtual Cinema, Native V[...]

Specifications 128 LightStyle™ LS-12HBd Inst allation/Operation M anual P RELI M INARY Weight: 17.6 lbs. (8.00 kg ) Regulatory Appro val s : cTUVus, FCC cla ss B, CE, RoHS, China RoH S, WEEE, C-Tick, CCC, local conformances as required Limited Warranty: Two (2) years parts an d labor from the date of shipment from Runco. S pecification s are s ub[...]

Specifications LightStyle™ LS-12HBd Instal lation/Operation Manual 129 PRE L IMINAR Y 7.3 Supported Timings Table 7-3 lists the signal types supported by e ach inpu t on the Dime nsion Digital Controller. Table 7-3. S upported S ignal Timin g s by Input Format Re s olution Refre s h Rate (Hz) Horizontal Frequency (kHz) Pixel Frequency (MHz) S upp[...]

Specifications 130 LightStyle™ LS-12HBd Inst allation/Operation M anual P RELI M INARY S upported 3D Mod e s (continued) 1080p TAB (Top-and- Bottom) 1920x1080 23.98 26.978 74.175 – √ –––– 24.00 27.000 74.250 – √ –––– 29.97 33.716 74.175 – √ –––– 30.00 33.750 74.250 – √ –––– 50.00 56.250 148.500 – [...]

Specifications LightStyle™ LS-12HBd Instal lation/Operation Manual 131 PRE L IMINAR Y S upported 2D Mod e s (continued) 1152x864 1152x864 75.00 67.500 108.000 √√√√ – – 1280x720 1280x720 47.95 37.833 64.769 √√√√ – – 1280x768 1280x768 60.00 47.396 68.250 √√√√ – – 60.00 47.776 79.500 √√√√ – – 75.00 60.[...]

Specifications 132 LightStyle™ LS-12HBd Inst allation/Operation M anual P RELI M INARY S upported 2D Mod e s (continued) SCART RGBS – 50.00 – – –––– √ – 480/60i 720x487 59.94 15.73 4 13.500 √√√√ – – 480/60p 720x483 59.94 31.469 27.00 0 √√√√ – – 576/50i 720x576 50.00 15.62 5 14.750 √√√√ – – 576[...]

Specifications LightStyle™ LS-12HBd Instal lation/Operation Manual 133 PRE L IMINAR Y 7.4 LS-12HBd Dimensions Figure 7-1 shows the LS-12HBd dime nsions, in [millimeters] and inches. Figure 7-1. L S -12HBd Dimen s ion s 25.30 642.6 5.20 132.0 8.34 21 1.9 .50 (ADJUST ABLE) 12.8 REMOV ABLE REAR COVER 20.47 519.9 10.23 259.9 3.93 99.9 3.93 99.9 7.08 [...]

Specifications 134 LightStyle™ LS-12HBd Inst allation/Operation M anual P RELI M INARY Note s :[...]

[...]

Runco International • (800) 23RUNCO • Fax (503) 748-8161 • www.runco.com 020-1251-00 Rev. A September 20 13[...]