Runco VX-2ix инструкция обслуживания

O WNER ’ S O PERATING M ANUAL VX-2ix Digital Light Processing TM Projector and DHD Controller[...]

[...]

Runco VX-2ix Owner’s Operating Manual iii TWO YEAR LIMITED WARRANTY For Projectors, Video Processors and Controllers Congratulation s on your purchase of a Runc o video product and welcome to the Run co family! We believe Runco produ ces “The World’s Fine st Home Thea ter Products .” With prope r installation, setu p and care, yo u should e[...]

iv Runc o VX-2ix Owner ’s Operating Manual This warranty begins on the effective da te of delivery to the end use r. For your convenience, k eep the origin al bill of sale a s evidence of th e purchas e date. Please fill out and mail your warranty registration card. It is im perative that Runco knows how to reach you promptly if we should discove[...]

Runco VX-2ix Owner’s Operating Manual v To locate th e name and address of th e nearest Runc o Authorized Se rvice Center, o r for additiona l information ab out this Limited Warran ty, please call or w rite: RUNCO INTERNA TIONAL, INC. Attn: Customer Service Dep artment 2900 Faber St reet Union City , CA 94587 Ph: (510) 324-7777 Fax: (510) 324-93[...]

vi Ru nco VX-2ix Owner’s Operating Manual Thank you for your purcha se of this quality Runc o video projector! It has been designed to prov ide you with the quality of vide o that is exp ected in a home theat er. For the best perfo rmance, plea se read th is manual ca refully as it is you r guide th rough the menus and operat ion. This equipment [...]

Runco VX-2ix Owner’s Operating Manual vii 1 Table of Contents TWO YEAR LIMITED WARRANTY ................ ................ ................ ............. ................ .... iii Safety Preca utions .............. ............. ................ ............. ................ ............. ................ .... vi 1. Introduction ............... .[...]

Table of Contents viii Runco VX-2ix Owner’s Operating Manual Mounting the VX-2ix ............... ............. ................ ................ ............. ................ .......... 20 Floor Mount ing (Upright) ............. ............. ................ ............. ................ ............. ... 20 Ceiling Moun ting (Inverted) ......[...]

Table of Contents Runco VX-2ix Owner’s Operating Manual ix APPENDIX A. VX-2ix Color Gamut Adjustment ............. ................................ ........... A-1 Required Ha rdware and Software ....... ............. ................ ............. ................ ........... A-2 Serial Connectio ns and Equipme nt Setup ........... .............[...]

Table of Contents x Runco VX-2ix Owner’s Operating Manual Notes:[...]

Runco VX-2ix Owner’s Operating Manual xi 1 List of Figures 2-1. VX-2ix Front /Bottom/Side View ........... ................ ............. ................ ................ ............ 5 2-2. VX-2ix Rear Panel ......... ................. ............. ................ ................ ............. ................ ..... 6 2-3. VX-2ix Rem ote Con[...]

List of Figures xii Runco VX-2ix Owner’s Operating Manual Notes:[...]

Runco VX-2ix Owner’s Operating Manual 1 1.1 About This Manual This Owner’s M anual describe s how to install, set up and ope rate the Runc o VX-2ix DLP Projector. Th roughout th is manual, the Runco VX-2ix DLP Projector is refe rred to simp ly as the “VX -2ix.” Target Audience Runco has pr epared this man ual to help home theate r installer[...]

Introduc tion 2 Runco VX-2ix Owner’s Operating Manual Graphic Convention s: These sym bols appear in numerous pl aces througho ut the manual, to emp hasize points th at you must k eep in mind to avoid problem s with your equipment o r injury: 1.2 Using This Manual Use the following ta ble to locate the spec if ic information you ne ed in this man[...]

Introd uction Runco VX-2ix Owner’s Operating Manual 3 1.3 Description, Features and Benefits Runco steps into the future once ag ain with the Vid eo Xtreme™ VX-2i x Digital Light Processing (DLP™) Projector, on e of the world’s first THX ® Certified, high-definition home theater pro jectors. The VX-2ix op tical light engine utilizes three,[...]

Introduc tion 4 Runco VX-2ix Owner’s Operating Manual Key Features and Benefits The VX-2ix offers these key feat ures and ben efits: • Native Resolution: 12 80 x 720 (16:9 Native Aspect Ratio) • Three-chip Digital Light Processing (D LP™) system • Two DVI Inputs with High-bandwidth Digital Content Protecti on (HDCP) • HDTV Compatible ?[...]

Runco VX-2ix Owner’s Operating Manual 5 2.1 VX-2ix at a Glance Figure 2-1 sho ws the key VX-2ix c omponents. Figure 2- 1. VX-2ix Front/B ottom/Side View 1. INT AKE VENT 2. LENS 3. RUNCO LOGO The logo can be rotated to match the projector orientation: invert ed (ceiling-mounted) or upright. To rotate the logo, grip it at the sides, pull it away fr[...]

Controls and Functions 6 Runco VX-2ix Owner’s Operating Manual 2.2 VX-2ix Rear Panel Figure 2-2 shows the VX-2ix rear panel. Figure 2-2. VX-2ix Rear Panel 1. DVI 1 / DVI 2 (Digital) Two, HDCP-co mpliant digital vide o inputs for c onnecting a DVD player o r HD tuner with a DVI or HDMI output. 2. COMPONENT VIDEO (R CA connectors) Standard Defini t[...]

Controls and Functi ons Runco VX-2ix Owner’s Operating Manual 7 5. 12-VOL T (750 mA) TRIGGER OU TPUTS Connection fo r up to thre e (3), 12-volt t rigger-contro lled devices. T hese can be retractable screens, screen masks or the Runco CineWi de with AutoScope system. 6. S-VIDEO 1 / S-VIDEO 2 Two, standard S-Video inputs for connecting a DVD play [...]

Controls and Functions 8 Runco VX-2ix Owner’s Operating Manual 14. RIGHT BUTTON Used to direct-selec t inputs or m ove the menu cursor right in the On Screen Display. When no menus are pres ent on-screen , the RIGHT button toggles you th rough the different sour ces, in this order : Composite - S-Vide o 1 - S-Video 2 - Component SD - HD/RGB 1 - H[...]

Controls and Functi ons Runco VX-2ix Owner’s Operating Manual 9 2.3 VX-2ix Remote Control Figure 2-3 sho ws the VX-2ix r emote control, and the par agraphs that fo llow descri be its functionalit y. Figure 2-3. VX-2ix Remote Control 12 1 2 3 6 8 9 11 10 13 5 7 4[...]

Controls and Functions 10 Runco VX-2ix Owner ’s Operating Manual 1. IR OUTPUT INDICA TOR Lights when a button is pre ssed to indic ate that an IR sign al is being tran smitted. 2. ON / OFF Press to turn the projector on or off. 3. ENTER Press to select a h ighlighted m enu item or co nfirm a chang ed setting. 4. Cursor Buttons ( , , , ) Use these[...]

Controls and Functi ons Runco VX-2ix Owner’s Operating Manual 11 9. Aspect Ratio Selection Bu ttons Use the red b uttons to selec t an aspec t ratio dire ctly or t o enter num eric charac ters, as follows: ANA (Anamorphic) (3) For viewing 16 :9 DVDs or HDTV p rograms in their native asp ect ratio. 4X3 (Standar d 4:3) (6) Scales the input signal t[...]

Controls and Functions 12 Runco VX-2ix Owner ’s Operating Manual Notes:[...]

Runco VX-2ix Owner’s Operating Manual 13 3.1 Remote Control To install batteries in the remote co ntrol, press up on the battery cove r retainer clip and lift off the cove r. Install the two AAA batteries w ith the correc t polarity a nd then replac e the cover . Notes on Batteries • Make sure tha t the battery pol arities are cor rect when ins[...]

Installation 14 Runco VX-2ix Owner ’s Operating Manual 3.2 Quick Setup Table 3-1 gi ves a quick over view of the VX-2 ix installation pr ocess. The section s following this one prov ide deta iled instr uctions . Installation sh ould be performed by a qualified custom video installation specialist. Table 3-1. Installation Overview Step Procedure F[...]

Installation Runco VX-2ix Owner’s Operating Manual 15 3.3 Installation Considerations Proper installation of you r projector will ensure the qualit y of your display . Whether you are installing a pr ojector temp orarily or p ermanently, you should t ake the following into account to ensure your p rojector per forms optimally. Installati on Type [...]

Installation 16 Runco VX-2ix Owner ’s Operating Manual Throw Distance Throw distance is the dista nce measured fro m the front of the projecto r to the screen. This is an impo rtant calculat ion in any p rojecto r installation as it de termines whether or not you have enough roo m to install your pro jector with a de sired screen size an d if you[...]

Installation Runco VX-2ix Owner’s Operating Manual 17 Vertical and Horizontal Position Proper placement of the projector relative to the screen will yield a rectang ular, perfectly-centered image that completely fills the screen. Ideally, the proj ector should be positioned p erpendicular t o the screen and in such a way that the lens cente r and[...]

Installation 18 Runco VX-2ix Owner ’s Operating Manual Figure 3-3. Vertical Lens Shift (Examp le Only) Figure 3-4. Horizontal Lens Shift (Example Only) Base plate to lens center = approx. 5-6" (depending on the amount of lens shift) 50% Height Lens Shift (0.5 x H) 100% Height Lens Shift (1.0 x H) 150% Height Lens Shift (1.5 x H) Screen Cente[...]

Installation Runco VX-2ix Owner’s Operating Manual 19 Folded Optics In rear screen ap plications where space behind the project or is limited, a mirror may be used to fold th e optical path , as shown in Figure 3-5 . The position of the projecto r and mirror must be accurate ly set. If yo u are cons idering this t ype of installat ion, contact yo[...]

Installation 20 Runco VX-2ix Owner ’s Operating Manual 3.5 Mounting the VX-2ix There are se veral method s for mountin g the projec tor. Depending o n your chose n installation, one method may b e more suit able than ano ther. Floor Mounting (Upright) In typical front an d rear screen in stallations, the pro jector can be m ounted to a se cure an[...]

Installation Runco VX-2ix Owner’s Operating Manual 21 3.6 Connections to the VX-2ix Proceed as follo ws to connect the VX-2ix to yo ur video sources, external contr oller(s) – if present – and AC power. When connect ing your equipm ent: • Turn off all equipment be fore making any connection s. • Use the corr ect signal cable s for each so[...]

Installation 22 Runco VX-2ix Owner ’s Operating Manual Digital (DTV) RGB or Component Video Connections: See Figure 3-7. Figure 3-7. Digital (DTV) RGB Connections DVI 1 DVI 1 HD1 HD2 Y G G Y H V INPUTS HV HD1 HD2 INPUTS R Pr Pr R B Pb Pb B DVI 2 DVI 2 COMPONENT VIDEO Pb Pr Y COMPONENT VIDEO Y Pr Pb VIDEO VIDEO S-VIDEO 2 S-VIDEO 2 S-VIDEO 1 S-VIDE[...]

Installation Runco VX-2ix Owner’s Operating Manual 23 Analog (Computer) RGB Connec tions: See Figure 3-8 . Figure 3-8. Analog RGB Connec tions DVI 1 DVI 1 HD1 HD2 Y G G Y H V INPUTS HV HD1 HD2 INPUTS R Pr Pr R B Pb Pb B DVI 2 DVI 2 COMPONENT VIDEO Pb Pr Y COMPONENT VIDEO Y Pr Pb VIDEO VIDEO S-VIDEO 2 S-VIDEO 2 S-VIDEO 1 S-VIDEO 1 RS-232 CONTROL R[...]

Installation 24 Runco VX-2ix Owner ’s Operating Manual Composite/S-Video/Component Video Connections: See Figure 3-9. Figure 3-9. Composite, S-Video and Comp onent Video Connections DVI 1 DVI 1 HD1 HD2 Y G G Y H V INPUTS HV HD1 HD2 INPUTS R Pr Pr R B Pb Pb B DVI 2 DVI 2 COMPONENT VIDEO Pb Pr Y COMPONENT VIDEO Y Pr Pb VIDEO VIDEO S-VIDEO 2 S-VIDEO[...]

Installation Runco VX-2ix Owner’s Operating Manual 25 RS-232 Controller Connection Use a standard , 9-pin RS-232 ca ble to connect a PC or home theate r control/aut omation system (if present) to th e RS-232 C ONTROL port on the VX-2ix; see Figure 3 -10 . For more in formation ab out using this c onnection, re fer to Serial Communications on page[...]

Installation 26 Runco VX-2ix Owner ’s Operating Manual If your home th eater contain s a retractab le screen, screen mask o r other 12-Vo lt trigger-act ivated equip ment, conne ct it to a 1 2-Volt trigger o utput as sho wn in Figure 3-12 . Figure 3 -12. Conn ecting a 12-Volt T rigger O utput to O ther Eq uipmen t Connecting to AC Power Plug the [...]

Runco VX-2ix Owner’s Operating Manual 27 4.1 Turning on the Power 1. Turn on yo ur source components. 2. Turn o n the main po wer switch on the proje ctor. 3. If this is an Auto Scope-equipped projector, tu rn on the main power switch at the rear of the AutoScope lens mo tor. The lens moto r power switch is located next to the AC input. 4. Press [...]

Operation 28 Runco VX-2ix Owner ’s Operating Manual 4.3 Lens Adjustments To access the mot orized lens contro ls, select Display Device fr om the Service Menu , then select Lens fro m the Display Device menu . The Lens m enu gives yo u a great de al of control over the picture size , position and fo cus: Focus To focus the p rojected imag e, use [...]

Operation Runco VX-2ix Owner’s Operating Manual 29 Figure 4-1. VX-2ix OSD Menu Structure Calibration ISF Night - Display Color Gain Offset Gamma Lamp Power Color Temp ISF Night - Input Image Brightness Contrast Color Tint Sharp ness ISF Night - Input Color Gain Offset Chroma Delay Phase Noise Filter ISF Day - Display Color Gain Offset Gamma Lamp [...]

Operation 30 Runco VX-2ix Owner ’s Operating Manual Main Menu The Main Menu is the starting point for accessing all project or functions. (The Calibratio n and Service men us are hidden and not ac cessible until you e nter a passcode.) Input Source From the Main Menu, select Inp ut Source to choose a vid eo signal source. The active sou rce is in[...]

Operation Runco VX-2ix Owner’s Operating Manual 31 Table 4-1. Aspect Ratio Settings Aspect Ratio Remote Control Key Description Anamorphic ANA Select Anamorphic to view 16:9 DVDs and HDTV programs in their nati ve aspect ra tio. 4:3 images are stretched horizontally to fi t a 16:9 screen. Standard 4:3 4X3 Standard 4:3 scales the input signal to f[...]

Operation 32 Runco VX-2ix Owner ’s Operating Manual Cinema CINEMA Select Cinema to v iew 2.35 source material in its native aspect ratio. With a 16:9 screen and a non-CineWide projector (no anamorphic lens), the upper and lower portions of the screen are masked, but the geometry of the active image area is unchanged. With a 2.35:1 screen and a Ci[...]

Operation Runco VX-2ix Owner’s Operating Manual 33 Picture Use the controls in the Picture Menu to calibra te your VX-2ix for optimum picture quality. The VX-2ix has be en designed to in corporate set up and calibratio n standards establish ed by the Imaging Sc ience Founda tion (ISF). The ISF has develope d carefully craf ted, industry-rec ogniz[...]

Operation 34 Runco VX-2ix Owner ’s Operating Manual PLUGE patterns v ary but gene rally consist of some comb ination of b lack, white an d gray areas against a bla ck background . The example above include s two vertical bars and four shaded boxes. Select Brightness fro m the Picture men u and press ENTER . Adjust the brightne ss so that: • The[...]

Operation Runco VX-2ix Owner’s Operating Manual 35 Color Saturation: On your exter nal test patt ern source, se lect a color bar pattern like the one shown in Figure 4-4 . Figure 4-4. Typical Color Bar Pattern for Adjusting Color Saturation and Tint Select Color and press ENTER . While looking at the color bar pattern through a blue filter, adjus[...]

Operation 36 Runco VX-2ix Owner ’s Operating Manual Sharpness: “Sh arpness” is the am ount of hig h-frequency de tail in th e image . To adjust sharpness, select Shar pness from the Pictur e menu and press ENTER . On your external test pattern source, sele ct a patte rn like the one shown in Figure 4-5 . Adjust as needed, looking for white ed[...]

Operation Runco VX-2ix Owner’s Operating Manual 37 Overscan: Image Overscan pushes the out side edge of the ac tive picture ar ea of the video signal out beyond the edge of the display area. Some television programs ar e produced b ased on th e assumption tha t older tele vision sets may not d isplay the ou ter edge s of the broa dcast picture ar[...]

Operation 38 Runco VX-2ix Owner ’s Operating Manual Calibration Use the Calibrat ion menu t o perform adv anced pict ure qualit y adjustments. This menu should be used by ISF-certifie d technicians only . To recall the ISF N ight or ISF Day se ttings, se lect “ISF Night” or “ISF Day” from the ISF Presets menu ( page 37 ). ISF Night - Disp[...]

Operation Runco VX-2ix Owner’s Operating Manual 39 ISF Night - Input Color: The Input Color controls are simila r to those in the Display Color menu (see above), but adjust the color balance of the inco ming signal. These set tings are also saved indepe ndently for ea ch input. • Gain/Offs et: Refer to ISF Night - Display Color , above. •C h [...]

Operation 40 Runco VX-2ix Owner ’s Operating Manual Service Use the Service m enu to acce ss advanced pr ojector configuratio n settings. This menu should be used by ISF-certified technicians only . Test Video: Select Test Video fro m the Service Menu to ac cess the internal te st patterns on the VX-2ix. Fo ur patterns ar e available, c onsisting[...]

Operation Runco VX-2ix Owner’s Operating Manual 41 Remote Control: The Remote Control menu sh ows you the p rimary and second ary infrared (IR) codes to which the VX-2ix will re spond. By default, bo th are set to 17. You can change these co des if either: • Another device in the thea ter (a DVD player , for example) is responding to commands f[...]

Operation 42 Runco VX-2ix Owner ’s Operating Manual HD Format: If the characteristic s of the incom ing signal on the HD1 or H D2 inputs are known, select HD Fo rmat from the Service menu an d set them as desc ribed below. Doin g so can reduce the time it takes the VX-2ix to switch from HD to 480i signals or vice vers a. This is generally no t ne[...]

Operation Runco VX-2ix Owner’s Operating Manual 43 System Reset: To reset ALL project or and controlle r settings (including image settings) back to their factory de faults, choose System Reset fro m the Serv ice menu . A confirmation message appears, r eminding you to save you r settings before you pe rform the reset, so that yo u can restore th[...]

Operation 44 Runco VX-2ix Owner ’s Operating Manual Notes:[...]

Runco VX-2ix Owner’s Operating Manual 45 5.1 Lamp Replacement The lamp should be replac ed when it reaches the e nd of its life (t ypically 2000 h ours), or sooner if a no ticeable degr adation in b rightness occ urs. Contact your Runco d ealer to obtain a repl acement lamp. 1. Turn off the proj ector and unplu g the power cord. Allow the project[...]

Maintenance and Troublesho oting 46 Runco VX-2ix Owner ’s Operating Manual 3. Loosen the captive Phillips screw from the bottom of the fr ont lens decora tive bezel. 4. Slide the beze l upward to remove it . 5. Remove the foam shield ar ound the front of the lens. 6. Using the red-handled, 3-mm hex driver provided with the projecto r, loosen t he[...]

Maintenance and Troubleshooting Runco VX-2ix Owner’s Operating Manual 47 Note that the len s mount flange has a female socke t connector for the lens motor on the right side of the flang e. Note that the lens assembly motor has a male socket connector . 8. Hold the replac ement lens assembly with the motor f acing upward . Carefully insert the ba[...]

Maintenance and Troublesho oting 48 Runco VX-2ix Owner ’s Operating Manual 11. Replace the fo am lens shield. 12. Reattach the front lens beze l by sliding the top down o nto the tw o retaining dowels. 13. Tighten the Phillips sc rew on the bottom of the bezel to s ecure it.[...]

Maintenance and Troubleshooting Runco VX-2ix Owner’s Operating Manual 49 5.3 Troubleshooting Tips Table 5-1 provide s some general guideli nes for troublesho oting problems you may encounter w ith the VX-2ix. If you encounter an issue not desc ribed here, p lease contact Runco Techni cal Support. Table 5-1. Troubleshooting Chart Symptom Possib le[...]

Maintenance and Troublesho oting 50 Runco VX-2ix Owner ’s Operating Manual Notes:[...]

Runco VX-2ix Owner’s Operating Manual 51 6.1 RS-232 Connection and Port Configuration To interface the VX-2ix with a home theater automation/con trol system or a PC running terminal emulation software, connect it to your control system or PC as shown in Figure 3-10 . Configure the RS-23 2 controlle r or PC serial p ort as follows: n o parity , 8 [...]

Serial Communications 52 Runco VX-2ix Owner ’s Operating Manual Input Selection Commands COMPONENT NA YES Selects the Component input COMPOSITE NA YES Selects the Composite video input DVI1 NA YES Selects the DVI 1 input DVI2 NA YES Selects the DVI 2 input HD1 NA YES Selects the RGB HD 1 input HD2 NA YES Selects the RGB HD 2 input INPUT? NA NA Re[...]

Serial Communications Runco VX-2ix Owner’s Operating Manual 53 Picture Adjust Commands BRIGHTNESS -100/100 YES Sets a value for brightness BRIGHTNESS? NA NA Returns brightness setting value CHROMADELAY -12/12 YES Sets a value for input color chroma delay CHROMADELAY? NA NA Re turns input color chrom a delay setting COLOR -100/100 YES Sets a value[...]

Serial Communications 54 Runco VX-2ix Owner ’s Operating Manual Input Position Comm ands IHEIGHT -100/100 YES Sets the value for input height IHEIGHT? NA NA Returns input height value IHPOS -100/100 YES Sets a value for hori zontal input position IHPOS? NA NA Returns input h orizontal position value IVPOS -100/100 YES Sets a value for vert ical i[...]

Serial Communications Runco VX-2ix Owner’s Operating Manual 55 Miscellaneous Commands BKGND -100/100 YES Sets the background color for letterbox or 4:3 aspect ratio (-100 = black; 100 = white) BKGND? NA NA Returns background setting value DATE? NA NA Returns product manu facture date HDINPUTRES NA YES Sets YPbPr input resolution and refresh rate [...]

Serial Communications 56 Runco VX-2ix Owner ’s Operating Manual Notes:[...]

Runco VX-2ix Owner’s Operating Manual 57 7.1 VX-2ix Specifications Table 7-1 lists the VX-2ix specifications. 7. Specifications Table 7-1. VX-2ix Specifications Projector Type: Digital Light Processing (DLP), 3-chip, 16:9 DMD Native Resolution: 1280 x 720 (16:9) Aspect Ratios: 4:3, Letterbox, 16:9 Anamorph ic, VirtualWide, Cinema , VirtualWide 2.[...]

Specifications 58 Runco VX-2ix Owner ’s Operating Manual Brightness and Contrast: Cinema Stan dards Measurement System (CSMS) Specifications - Brightness: 52.1 foot-Lamberts (fL) - Contrast Ratio: 271:1 These measurements are taken from the projector in a controlled, home theater environment. Al l measurements are made to ANSI/NAPM IT7.228-1997 s[...]

Specifications Runco VX-2ix Owner’s Operating Manual 59 Limited Warranty: Projector: Two (2) years parts and la bor from the date of delivery to the end user. Lamp: 1000 hours or six (6) mo nths, whichever comes first. Specifications are subject to change without notice. Table 7-1. VX-2ix Specifications (continued)[...]

Specifications 60 Runco VX-2ix Owner ’s Operating Manual 7.2 VX-2ix Dimensions Figure 7-1 shows the VX-2ix dime nsions. Figure 7-1. VX-2ix Dimensions 0 8.389 15.857 21.190 .500 25.737 .134 1.500 1.330 .750 9.245 1.500 12.123 R 10.680 0 1.620 23.990 all dimensions are in inches 14.671 9.934 0 1.685 19.505 1.305 4.335 Ø 1.140[...]

Runco VX-2ix Owner’s Operating Manual A-1 For most applica tions, the Dis play Color co ntrols in the Calibra tion menu are adequate for producing accu rate and realisti c colors from a variet y of sources. In rare cases, though, you may need m ore precise c ontrol over the VX-2ix display color gamut (range ). For example, you may require a uniqu[...]

VX-2ix Color Gamut Adjustment A-2 Runco VX-2ix Owner’s Operating Manual A.1 Required Hardware and Software To perform th ese adjustments, you ne ed the following: • Laptop or deskt op PC with a DB-9 serial port. • A straight -through (n ot null-mode m) serial cable (D B-9 female to DB-9 male). • A DB-9 female-to-3.5mm phono plug adapter. ?[...]

VX-2ix Color Gamut Adjustment Runco VX-2ix Owner’s Operating Manual A-3 Figure A-3. VX-2ix Secondary RS-232 Port 4. Connect th e color senso r to any availab le COM or USB p ort. 5. Launch HyperTermina l. Open a con nection using t hese para meters: 192 00 baud, 8 data bits, no parity,1 sto p bit and no flow control. 6. Press <Enter> . The [...]

VX-2ix Color Gamut Adjustment A-4 Runco VX-2ix Owner’s Operating Manual A.4 Adjusting the Gamut 1. In HyperTerminal , type gamut white an d press <Enter>. The VX-2ix displays a white field on t he screen and the curren t x and y coo rdinates for w hite on the command line. 2. Using the co lor analyzer , measure the x and y coo rdinates for [...]

VX-2ix Color Gamut Adjustment Runco VX-2ix Owner’s Operating Manual A-5 9. Type gamut green and press <Enter>. The VX-2ix displays a green field on the screen and t he current x and y coord inates for gre en on the co mmand line. 10. Repeat Step 2. 11. In HyperTe rminal, us e the gamut set green com mand to ch ange the x and y coordinates t[...]

VX-2ix Color Gamut Adjustment A-6 Runco VX-2ix Owner’s Operating Manual Notes:[...]

[...]

Runco International • 2900 Faber Street • Union City , CA 94587 • Ph (510) 324-7777 / (800) 23RUNCO / Fax (510) 324-9300 www .runco.com RUMA-011155 rev 09-27-06 v2.2 SERIAL NUMBER[...]