Russound K2 инструкция обслуживания

SaphIR ™ K2 Keypad Instruction Manual[...]

2 SAFETY PRECAUTIONS For your safety , please read and follow these pr ecautions before installing or using this pr oduct: ➤ Read instructions. Read and understand all the applicable instructions before installing or operating the device. ➤ Retain documents. Keep this manual in a convenient place for refer ence. ➤ Heed warnings. Be awar e of [...]

3 T ABLE OF CONTENTS USER SECTION 4–9 Introduction 4 Features and Key Guide 5 Optional SRC1 Basic Remote Control 6 Optional SRC2 Advanced Learning Remote Control 7 Keypad Operation 8 INST ALLER SECTION 10–55 Getting Started 10–12 Installation Overview 10 T erms Y ou Need to Know 10 T ypical System Configuration 12 Keypad Installation 13 Keypa[...]

4 USER Intr oduction Pr oduct Overview Thank you for choosing the Russound SaphIR ™ K2 keypad. The K2 is an in-wall programmable IR keypad that works like a uni- versal remote to pr ovide complete control of your audio and video components. It contains an extensive library of IR codes to select discs, tracks, channels, volume, and other settings [...]

DISPLA Y – 12-character backlit LCD panel shows source name and other information SOURCE SELECT KEY – Selects the desired sour ce connected to the amp/receiver VOLUME UP/DOWN KEYS – Control the volume of the amp/receiver IR SENSOR – Receives IR signals from a r emote control for operating the K2 Keypad and the sour ce equipment COMMAND KEYS[...]

6 USER Optional SRC1 Basic Remote Contr ol POWER KEY – T urns the keypad on and of f. Press and hold for All On or All Off function. NUMERIC KEYS – For direct selection of channels or tracks. VOLUME UP/DOWN KEY – Raises and lowers the amp/receiver volume. COMMAND KEYS – Control the sour ce equipment. DIRECT SOURCE SELECT KEYS – Directly s[...]

7 POWER KEY – T urns the keypad on and of f while in System mode. Press and hold for All On or All Off function. SYSTEM MODE KEY – Selects System mode to control the SaphIR K2 keypad and connected sources. The r emote must be in System mode to work with the SaphIR K2 keypad. NUMERIC KEYS – For direct selection of channels or tracks. VOLUME UP[...]

8 USER Keypad Operation On/Off Press and r elease to turn on the K2 keypad. This will also activate any speakers wired thr ough the speak- er relay on the back of the K2. If power management is set up on your keypad, turning on the keypad will also turn on your amp/receiver and sour ce components. If you have more than one K2 keypad in your system,[...]

9 USER Keypad Operation F1 and F2 Keys The and preset keys ar e for saving and recall- ing a source selection and favorite disk or channel. T o save a pr eset , first select a source. Next, pr ess and hold the or key until SAVED appears on the dis- play . This saves the source selection. Within 15 seconds you can also save a favorite disk or channe[...]

10 INST ALLER Getting Started About this Section The rest of this manual pr ovides technical information for installing and programming the SaphIR K2 keypad. This section is intended mostly for installers, but users may find the information useful as well. Installation Overview Several key steps will lead you to a successful SaphIR K2 installation:[...]

11 INST ALLER Getting Started web site and uploaded into the keypad by using the Firmware Update procedur e in the System Menu. This requir es connect- ing a computer to the keypad with a Programming Cable, part number 2500-121036. Input Order – The order in which the amp/r eceiver selects its source inputs. By default, the K2 keypad selects Inpu[...]

12 INST ALLER Getting Started T ypical System Configuration The SaphIR K2 keypad requir es an IR connecting block such as the Russound 857 for power and communication with the compo- nents and other K2 keypads. The amp/receiver and other devices receive commands fr om the 857 connecting block through 845.1 or 1584.1 micro emitters or by direct conn[...]

13 INST ALLER Keypad Installation T ools Needed for Installation • Drill with a 1 ⁄ 2 -inch drill bit • Keyhole saw • Flat-head screwdriver (medium size) • Phillips screwdriver (cordless r ecommended) • Wire cutter-stripper • Stud finder • Electrician’ s fish tape Back plate (1) Back plate mounting screws (4) Keypad mounting screw[...]

14 INST ALLER Keypad Connections 1 4 2 3 4 3 Stand Alone IR Keypad MADE IN KOREA +12VDC 200mA IN INFRARED CONNECTOR – For connecting the K2 to a requir ed connecting block (e.g., 857) OS UPDA TE JUMPER – Selects RUN or OS UPDA TE mode RESET BUTTON – For resetting keypad when changing between RUN and OS UPDA TE modes SPEAKER OUTPUT CONNECTOR ?[...]

15 INST ALLER EZB-1SC Connections Shielded 22/4 Cable Wire Color Function Red +12V Black Ground Green IR Signal White Status Bare Drain (Gnd) T op View EZB-1SC Side View T op V iew EZB-1SC CA T -5 CABLE Wire Color Function Brown +12V Blue +12V Orange IR Signal Green Status Orange/White Drain (Gnd) Green/White Drain (Gnd) Brown/White Gr ound Blue/Wh[...]

16 INST ALLER Multiple 857 Connections T o SaphIR K2 keypads T o EZB-1SC connecting block with up to 4 SaphIR K2 keypads Multiple 857 Connections Multiple groups of up to four K2 keypads can be linked together by using successive Russound 857 IR connecting blocks as shown in the dia- gram to the left. Each IR con- necting block must have its own 12[...]

17 INST ALLER Multiple 857 Connections 857 to EZB 857 to EZB 857 857 Fr om 857 to next 857 connecting block IR C OMMO + 12VDC G N D ST A TUS SIG N AL D IR C OMMO + 12VDC G N D ST A TUS SIG N AL D 857 857 857 to EZB 857 to EZB IR R ECEIVE IR C OMMO + 12VDC G N D STATUS SIG N AL D IR C OMMO N I N + 12VDC G N D STATUS SIG N AL DESIG From 857 t o next [...]

18 INST ALLER Pr ogramming Por t 3 3 SETUP BUTTON – Accesses and clears the programming menu for manually pr ogramming the keypad and getting information PROGRAMMING PORT – Connects to a computer for keypad programming, configuration backup, and firmwar e updates IR LEARNING RECEIVER DIODE – Receives signals from a r emote control when the ke[...]

19 INST ALLER Pr ogramming Overview Pr ogramming Methods There ar e two ways to program the SaphIR K2 keypad. The easier method is to use EZpr o software on a connected Windows-based computer , but you can also program the keypad manually using the pr ogramming menu described in this section. The menu is or ganized in a file tree structur e similar[...]

20 INST ALLER Pr ogramming Overview Recommended Pr ocess It will be much easier to program the SaphIR K2 if you follow the steps in a particular order , especially if you’re pr ogramming it manually . Here’ s the or der we recommend for initial setup: 1. Component Control – First learn how the amp/r eceiver and source components work with the[...]

21 11. Amp/Receiver Key Configuration (page 24) – By default, the Source key selects sour ces and the Volume keys adjust the output volume of the amp/receiver . Y ou may wish to reconfigur e these keys to perform alter- nate functions. The Amp/Receiver Key Configuration procedur e allows you to do this. 12. Source Command Key Configuration (page [...]

22 INST ALLER Pr ogramming Menu Instructions PROGRAMMING MENU The Programming Menu has various levels and consists of submenus, pr ocedures, and featur es. A procedur e is a guided sequence of steps to set feature parameters, such as selecting sour ce names. Once you begin a procedur e, the system prompts for the info r- mation needed at each step.[...]

23 INST ALLER Pr ogramming Menu Instructions The following sections describe the menus, procedur es, and features. They ar e presented in the or der we recommend for manually programming the keypad (when not using SaphIR EZpro softwar e). The flow charts on pages 43–53 are shown in the same order . Pr ogramming Menu T op Level Press the Setup but[...]

24 INST ALLER Pr ogramming Menu Instructions Amp/Receiver Basic Setup Pr ocedur e (continued) and the amp/receiver and turn it and all sour ces on. Also make sure you can contr ol the amp/receiver with its r emote control aimed at the SaphIR K2 keypad in normal operating mode. See Amp/Receiver Basic Setup Procedur e flow chart on page 43. T o begin[...]

25 INST ALLER Pr ogramming Menu Instructions T o begin the Amp/Receiver Key Configuration Procedur e, select KEY CONFIG fr om the Amp/Receiver Setup Menu and press . 1. SELECT A KEY – Pr ess or to select a key to be configured. Press to enter your selection. 2. COMMAND TYPE – Select and enter the type of command. Choose one of the following opt[...]

26 Learn IR Pr ocedur e (continued) These locations are called Learned Sour ces. Learned commands can be assigned in other procedur es by selecting Learned IR as a command type and then selecting the corresponding Learned Sour ce label. See Learn IR Procedur e flow chart on page 45. T o begin the Learn IR Procedur e, select LEARN IR fr om the top l[...]

27 INST ALLER Pr ogramming Menu Instructions 4. TEST IR? – Select and enter Ye s or No . Entering Ye s sends the learned command to the device to test the IR. If the device responds, the IR learning was a success. If the device does not r espond, either the keypad did not properly learn the com- mand or the command is inappropriate for the device[...]

28 INST ALLER Pr ogramming Menu Instructions Number of Sour ces Featur e (continued) T o enter the Number of Sources Featur e, select SOURCE SETUP fr om the top level of the Programming Menu and pr ess Play . At BASIC SETUP , press Previous once. At # OF SOURCES , press Play . Using the Plus or Minus key, scr oll through the numbers (1–8) to sele[...]

29 INST ALLER Pr ogramming Menu Instructions a. Select and enter a specific device (e.g., DVD , V ideo Acc , T uner/Amp ) to use an IR device code from the built-in library . i. DEVICE CODE – Select and enter the sour ce’ s IR device code number from the Refer ence section of this manual. ii. TEST IR? – Select and enter Ye s to send a power c[...]

30 INST ALLER Pr ogramming Menu Instructions Source Command Key Configuration Pr ocedure (Optional) This procedur e allows you to redefine command key functions for each sour ce. Each of the seven command keys can be customized for two functions: a “press” function and a “pr ess-and-hold” function. For example, since there is no Eject key o[...]

31 INST ALLER Pr ogramming Menu Instructions c. Select and enter Macro to configur e the key with a macro. (T o build macros, see Macr o Editor Procedur e on page 38.) i. MACRO ID – Select and enter the macr o ID number . d. Select and enter Unassigned to clear the key configuration. Any custom settings for that key will be erased. 6. SAVE CHANGE[...]

32 INST ALLER Pr ogramming Menu Instructions Numeric IR Pr ocedure (Optional) This procedur e allows you to program sour ce-specific numeric control functions (e.g., Channel 12, Disk 89) by enabling the Plus and Minus keys to scroll thr ough channel or disk numbers. The procedur e also allows the programming of pr efix and suffix commands. Some sou[...]

33 INST ALLER Pr ogramming Menu Instructions B . KEY FUNCTION – Select and enter the function you want the prefix command to perform (e.g., Disc , Channel , Preset ). iii. Select and enter a specific device (e.g., CD , TV ) to use an IR device code from the built-in library . A . DEVICE CODE – Select and enter the IR device code number fr om th[...]

34 INST ALLER Pr ogramming Menu Instructions Numeric IR Pr ocedur e (continued) A . DEVICE CODE – Select and enter the IR device code number fr om the Reference section of this manual. B . KEY FUNCTION – Select and enter the function you want the suffix command to per form (e.g., Enter , Play ). iv . Select and enter Macr o to configure the suf[...]

35 INST ALLER Pr ogramming Menu Instructions a. Select and enter Default to use the same command type previously selected for the sour ce in BASIC SETUP . b. Select and enter Learned IR to use a particular learned IR command not included in the default command type. (See Learn IR Procedur e on page 25.) i. LEARNED SRC – Select and enter the Learn[...]

36 INST ALLER Pr ogramming Menu Instructions Power Management Pr ocedur e (continued) Y ou can also verify the power state of the amp/receiver by obtaining a status voltage from a 12 VDC trigger output on the device or from a 12 VDC power supply plugged into its switched AC r eceptacle (see system diagram on page 12). This is useful when the amp/re[...]

37 INST ALLER Pr ogramming Menu Instructions A . MACRO ID – Select and enter the macr o ID number . v. Select and enter Unassigned to clear the Power On command. 3. POWER OFF CMD – Select and enter Ye s to program a Power Off command or macr o. Select and enter No to disable the Power Off command or macro and skip to SA VE CHANGES (step 4). a. [...]

38 INST ALLER Pr ogramming Menu Instructions Macr o Editor Pr ocedure (Optional) This procedur e allows you to create a sequence of commands that ar e launched with one key touch or other event. For example, you can create a macr o to lower a motorized screen and set the r eceiver in surround mode when you pr ess the Play key when a DVD player is s[...]

39 INST ALLER Pr ogramming Menu Instructions i. DEVICE CODE – Select and enter the IR device code number fr om the Reference section of this manual. ii. KEY FUNCTION – Select and enter the function you want the command to perform (e.g., Play ). Procedur e returns to COMMAND NUM (step 3). d. Select and enter Macro if you want this command to run[...]

40 SYSTEM MENU The System Menu contains items that allow you to obtain information about the keypad and perform various utilities. T o enter the System Menu, select SYSTEM from the top level of the Pr ogramming Menu and press Play . The menu offers the following procedur es: KEYP AD ID COPY CONFIG SYS INFO UPDA TE FIRMW FACTOR Y INIT DIAGNOSTICS Ke[...]

41 3. LOOKING FOR... – The sending keypad looks for the keypad(s) to copy to. When the sending keypad locates the r eceiving keypad(s), RDY TO RECEIVE appears on the receiving keypad(s). If a r eceiving keypad is not located, NOT FOUND appears on the sending keypad. 4. SENDING DA T A – Once the sending keypad has located the receiving keypad(s)[...]

42 Update Firmware Pr ocedure (Optional) This procedur e allows you to update the SaphIR K2’ s firmware fr om a computer using a Russound Programming Cable (part number 2500-121036) connected to the programming port on the side of the keypad (see diagram on page 18). Updates and instructions are made available in the Document Center at www .russo[...]

43 Press and Release Setup Button BASIC SETUP Procedure KEY CONFIG Procedure AMP/RCVR Setup SOURCE SETUP Menu AMP/RCVR SETUP Menu POWER MGT Procedure Installation Menu LEARN IR Procedure MACRO EDITOR Procedure SYSTEM Menu AMP/RCVR Setup - Basic Setup Procedure Setup button on right side of keypad under cover plate Enter menu/Up one level Next item [...]

44 INST ALLER Pr ogramming Flow Char ts Press and Release Setup Button BASIC SETUP Procedure KEY CONFIG Procedure AMP/RCVR Setup SOURCE SETUP Menu AMP/RCVR SETUP Menu POWER MGT Procedure Installation Menu LEARN IR Procedure MACR O EDITOR Procedure SYSTEM Menu AMP/RCVR Setup - Ke y Configur ation Proc edure Setup button on right side of keypad under[...]

45 Press and Release Setup Button SOURCE SETUP Menu AMP/RCVR SETUP Menu POWER MGT Procedure Learn IR Menu LEARN IR Procedure MACR O EDITOR Procedure SYSTEM Menu T ransmit IR remote into UNO-IR2 receiver diode Learn IR P rocedure Red LED on right side of UNO-IR2 blinks rapidly Setup button on right side of keypad under cover plate Enter menu/Up one [...]

46 INST ALLER Pr ogramming Flow Char ts Press and Release Setup Button BASIC SETUP Procedure KEY CONFIG Procedure SOURCE NAMES Procedure NUMERIC IR Procedure SRC SEL CMD Procedure # OF SOURCES Feature Source Setup Menu SOURCE SETUP Menu AMP/RCVR SETUP Menu POWER MGT Procedure Installation Menu LEARN IR Procedure MACRO EDITOR Procedure SYSTEM Menu S[...]

47 Press and Release Setup Button BASIC SETUP Procedure KEY CONFIG Procedure SOURCE NAMES Procedure NUMERIC IR Procedure SRC SEL CMD Procedure # OF SOURCES Feature Source Setup Menu SOURCE SETUP Menu AMP/RCVR SETUP Menu POWER MGT Procedure Menu LEARN IR Procedure MACRO EDITOR Procedure SYSTEM Menu Installation Source Setup - K ey C onfiguration Pr [...]

48 INST ALLER Pr ogramming Flow Char ts Press and Release Setup Button BASIC SETUP Procedure KEY CONFIG Procedure SOURCE NAMES Procedure NUMERIC IR Procedure SRC SEL CMD Procedure # OF SOURCES Feature SOURCE SETUP Menu AMP/RCVR SETUP Menu POWER MGT Procedure LEARN IR Procedure MACRO EDITOR Procedure SYSTEM Menu Source Setup Menu Menu Installation S[...]

49 MACRO MACRO ID Press and Release Setup Button BASIC SETUP Procedure KEY CONFIG Procedure SOURCE NAMES Procedure NUMERIC IR Procedure SRC SEL CMD Procedure # OF SOURCES Feature SOURCE SETUP Menu AMP/RCVR SETUP Menu POWER MGT Procedure LEARN IR Procedure MACRO EDITOR Procedure SYSTEM Menu Source Setup Menu Menu Installation Source Setup - Numeric [...]

50 INST ALLER Pr ogramming Flow Char ts Press and Release Setup Button BASIC SETUP Procedure KEY CONFIG Procedure SOURCE NAMES Procedure NUMERIC IR Procedure SOURCE SETUP Menu AMP/RCVR SETUP Menu POWER MGT Procedure LEARN IR Procedure MACRO EDITOR Procedure SYSTEM Menu Source Setup Menu Menu Installation Source Setup - Sourc e Selec t C ommand and [...]

51 Press and Release Setup Button SOURCE SETUP Menu AMP/RCVR SETUP Menu POWER MGT Procedure Pow e r MGT Menu LEARN IR Procedure MACRO EDITOR Procedure SYSTEM Menu USE ST A TUS ON P ower Management P rocedure Setup button on right side of keypad under cover plate Enter menu/Up one level Next item Pr evious item Select parameter Enter INST ALLER Pr o[...]

52 INST ALLER Pr ogramming Flow Char ts Press and Release Setup Button SOURCE SETUP Menu AMP/RCVR SETUP Menu POWER MGT Procedure Macro Editor Menu LEARN IR Procedure MACR O EDITOR Procedure SYSTEM Menu Macro Editor P rocedure Setup button on right side of keypad under cover plate Enter menu/Up one level Next item Pr evious item Select parameter Ent[...]

53 Press and Release Setup Button SOURCE SETUP Menu AMP/RCVR SETUP Menu POWER MGT Procedure Installation Menu LEARN IR Procedure MACRO EDITOR Procedure SYSTEM Menu KEYP AD ID COPY CONFIG Procedure SYSTEM INFO Procedure System Menu UPDA TE FIRMWARE Procedure F ACT ORY INIT Procedure DIAGNOSTICS Procedure Procedure COPY TO ... LOOKING FOR... ARE Y OU[...]

54 REFERENCE Source Information Form Source Name Manufacturer Model # IR Command Ty p e IR Device C ode (4-digit or Learned Source #) Numeric IR Highest # Auto Pl ay ( Y or N) Select the name for the Source from the Source Names List P age 4 8 . Enter the source component brand . Enter the model # of the source component here . Y or N Y or N The IR[...]

55 Source Name Manufacturer Model # IR Command Ty p e IR Device C ode (4-digit or Learned Source #) Numeric IR Highest # Auto Pl ay Amp/Rcvr Source Input # AMP/RCVR Source Inf ormation F orm 7 8 N/A N/A N/A Y or N Y or N Y or N Y or N Y or N Y or N Y or N Y or N Y or N Y or N Y or N Y or N Y or N Y or N Y or N Y or N N/A N/A K2 REFERENCE Source Inf[...]

56 REFERENCE Source Names Aux 1 Dance Music Mini Disk T uner 1 CustomName4 Aux 2 Digtl Cable Mood Music T uner 2 CustomName5 Aux DSS Receiver MorningMusic T uner 3 CustomName6 Blues DSS 1 MP3 T uner CustomName7 Cable 1 DSS 2 Oldies TV CustomName8 Cable 2 DSS 3 Pop VCR CustomName9 Cable 3 DVD Changer Rear Door VCR 1 CustomName10 Cable DVD Changr 1 R[...]

57 Device Codes for TVs: AOC 0030, 0019 Admiral 0093, 0463 Advent 0761 Aiko 0092 Aiwa 0701 Akai 0030 Alaron 0179 America Action 0180 Ampro 0751 Anam 0180 Apex Digital 0748, 0765, 0767 Audiovox 0451, 0180, 0092, 0623 Baysonic 0180 Belcor 0019 Bell & Howell 0154, 0016 Bradford 0180 Brockwood 0019 Broksonic 0236, 0463 CXC 0180 Candle 0030, 0056 Ca[...]

58 Sansui 0463 Sanyo 0154 Scimitsu 0019 Scotch 0178 Scott 0236, 0180, 0178, 0179, 0019 Sears 0047, 0747, 0054, 0154, 0156, 0178, 0179, 0056, 0171 Semivox 0180 Semp 0156 Sharp 0093, 0688, 0689 Shogun 0019 Signature 0016 Sony 0000, 1100 Soundesign 0180, 0178, 0179 Squareview 0171 Starlite 0180 Supreme 0000 Sylvania 0054, 0030, 0171 Symphonic 0171, 01[...]

59 Device Codes for VCRs: Admiral 0048, 0209 Adventura 0000 Aiko 0278 Aiwa 0037, 0000 Akai 0041 America Action 0278 American High 0035 Asha 0240 Audiovox 0037 Beaumark 0240 Bell & Howell 0104 Broksonic 0184, 0121, 0209, 0002, 0479 CCE 0072, 0278 Calix 0037 Canon 0035 Carver 0081 Cineral 0278 Citizen 0037, 0278, 1278 Colt 0072 Craig 0037, 0047, [...]

60 T eac 0000, 0041 T echnics 0035, 0162 T eknika 0035, 0037, 0000 Thomas 0000 Tivo 0618, 0636 T oshiba 0045, 0043, 0845 T otevision 0037, 0240 Unitech 0240 Vector 0045 Vector Resear ch 0038 Video Concepts 0045 Videomagic 0037 Videosonic 0240 Villain 0000 War ds 0035, 0060, 0760, 0048, 0047, 0081, 0000, 0042, 0240, 0072, 0149 White Westinghouse 020[...]

61 Quasar 0039 RCA 1023, 1254, 0531, 1390, 1609 Samsung 1295 Sansui 1089 Sherwood 1653 Sony 1058, 1158, 1258, 0158 Stereophonics 1023 Sunfire 1313 T echnics 1308, 1309, 1518, 0039 Thorens 1189 Ventur er 1390 Victor 0074 War ds 0014, 0158 Y amaha 0176, 1176 Device Codes for Amp and Misc. Audio: Aiwa 0010, 0159 GE 0078 Harman/Kardon 0892 Jerrold 0520[...]

62 REFERENCE Key Functions CABLE TV KEY FUNCTION P ower On/Off On, P ower On/Off Off, P ower On/Off Ch a nnel Up Ch a nnel Down Vo l u me Up Vo l u me Down M u te Digit 1 Digit 2 Digit 3 Digit 4 Digit 5 Digit 6 Digit 7 Digit 8 Digit 9 Digit 0 Ch a nnel Enter +100 L as t Ch a nnel TV/Video Extern a l Antenn a Le a rned Only Le a rned Only Le a rned [...]

63 BACK MENU UP MENU DOWN MENU LEFT MENU RIGHT S ELECT DI S K UP DI S K DOWN F A VORITE CHANNEL DI S PLA Y DI S PLA Y FORMA T S AP S URROUND ON/OFF S LOW OPEN/CLO S E RANDOM PIP ON PIP OFF PIP FREEZE PIP S WA P PIP MO VE PIP INPUT PIP CHANNEL UP PIP CHANNEL DOWN PIP MUL TI INPUT 1 INPUT 2 INPUT 3 INPUT 4 INPUT 5 INPUT 6 INPUT 7 INPUT 8 INPUT 9 INPU[...]

64 POWER ON OFF CHANNEL UP CHANNEL DOWN V OLUME UP V OLUME DOWN MUTE 1 2 3 4 5 6 7 8 9 0 ENTER +10/100 PREVIOU S CHANNEL INPUT EXTERNAL S OURCE PLA Y S TO P PA U S E S EARCH REVER S E S EARCH FORW ARD RECORD TRACK FWD TRACK REVER S E LIVE/INTRO MENU S ETUP MENU GUIDE EXIT P ower On/Off On, P ower On/Off Off, P ower On/Off Ch a nnel Up Ch a nnel Dow[...]

65 Cle a r Men u Up Men u Down Men u Left Men u Right Men u S elect Th u mb s Up Th u mb s Down Repl a y Zone s , Index M a rk Di s pl a y, O S D , Info Record S peed S AP , CC Le a rned Only S low Open/Clo s e, Eject Le a rned Only Le a rned Only Le a rned Only Le a rned Only Le a rned Only Le a rned Only Le a rned Only Le a rned Only Le a rned On[...]

66 AMP/MISC. A UDIO P ower On/Off On, P ower On/Off Off, P ower On/Off Pre s et Up Pre s et Down Vo l u me Up Vo l u me Down M u te Digit 1 Digit 2 Digit 3 Digit 4 Digit 5 Digit 6 Digit 7 Digit 8 Digit 9 Digit 0 5.1, Prologic B a nd, FM/AM Repe a t Byp ass , Inp u t S elect Extern a l A V S o u rce Pl a y S top P aus e Rewind F as t Forw a rd Recor[...]

67 BACK MENU UP MENU DOWN MENU LEFT MENU RIGHT S ELECT DI S K UP DI S K DOWN F A VORITE CHANNEL DI S PLA Y DI S PLA Y FORMA T S AP S URROUND ON/OFF S LOW OPEN/CLO S E RANDOM PIP ON PIP OFF PIP FREEZE PIP S WA P PIP MO VE PIP INPUT PIP CHANNEL UP PIP CHANNEL DOWN PIP MUL TI INPUT 1 INPUT 2 INPUT 3 INPUT 4 INPUT 5 INPUT 6 INPUT 7 INPUT 8 INPUT 9 INPU[...]

68 REFERENCE T echnical Specifications and Cer tifications T echnical Specifications Display: 12-character LCD Backlight: Selectable amber or green A-V device control: 8 sour ces plus receiver or amplifier IR control: Pr eprogrammed library of device codes Built-in IR sensor with pass-through Macro capability: Up to 132 10-step macr os Speaker rela[...]

69 REFERENCE W arranty W arranty The Russound SaphIR K2 is fully guaranteed against all defects in materials and workmanship for two (2) years from the date of pur chase. During this period, Russound will replace any defective parts and correct any defect in workmanship without char ge for either par ts or labo r. For this warranty to apply , the u[...]

70 NOTES[...]

71 NOTES[...]

SaphIR ™ K2 Keypad Programmable Infrared Control Instruction Manual Russound 5 Forbes Road, Newmarket NH 03857 USA V oice: 603.659.5170 • Fax: 603.659.5388 www .russound.com T echnical Suppor t: tech@russound.com 28-1151 Revision 2 01/18/06 Copyright © 2006 Russound[...]