Ryobi RJ165V инструкция обслуживания

SA VE THIS MANUAL FOR FUTURE REFERENCE Y our recipr ocating saw has been engineered and manufactured to our high standard for dependability , ease of operation, and operator safety . When properly car ed for , it will give you years of rugged, trouble-free performance. WARNING: T o r educe the risk of injury , the user must read and understand the [...]

2  Introduction ..................................................................................................................................................................... 2  W arranty .....................................................................................................................................................[...]

3 GENERAL SAFETY RULES WARNING! Read all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury . The term “power tool” in all of the war n- ings listed below refers to your mains-operated (cor ded) power tool or battery-operated (cordless) power tool. SA VE THESE INSTRUCTIONS WORK[...]

4 SPECIFIC SAFETY RULES  Hold power tool by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring or its own cord. Contact with a “live” wire will make exposed metal parts of the tool “live” and shock the operator .  Use clamps or other practical way to secure and sup- port the[...]

5 SYMBOLS Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the pr oduct better and safer . SYMBOL NAME DESIGNA TION/EXPLANA TION V V olts V oltage A Amperes Current Hz Hertz Frequency (cycles per second) W W att Power min Minutes Ti[...]

6 SYMBOLS SERVICE Servicing requir es extreme care and knowledge and should be performed only by a qualified service technician. For service we suggest you return the product to the nearest AUTHORIZED SERVICE CENTER for r epair . When servic- ing, use only identical replacement parts. WARNING: T o avoi d seri ou s pe rso nal inju ry , do no t att e[...]

7 EXTENSION CORDS When using a power tool at a considerable distance from a power source, be sure to use an extension cord that has the capacity to handle the current the pr oduct will draw . An undersized cord will cause a drop in line voltage, resulting in overheating and loss of power . Use the chart to determine the minimum wire size required i[...]

8 FEA TURES PRODUCT SPECIFICA TIONS Stroke Length ...................................................... 1-3/16 in. Strokes per Minute ........................................ 0-3,000 max. Input ............................... 120 V , AC only , 60 Hz, 6.5 Amps Net W eight .............................................................. 6.3 lbs. KNOW [...]

9 ASSEMBL Y UNP ACKING This product has been shipped completely assembled.  Carefully r emove the product and any accessories from the box. Make sure that all items listed in the packing list are included.  Inspect the product carefully to make sure no breakage or damage occurred during shipping.  Do not discard the packing material until [...]

10 3 OPERA TION SELECTING BLADES Selecting the correct type of blade is important in order to obtain the best performance from the saw . Select the blade based on the application and on the material you wish to cut. Selecting the right blade will give you a smoother , faster cut and prolong the life of the blade. Blades with fewer teeth, 10 teeth p[...]

11 OPERA TION OPERA TING THE SAW See Figure 5.  Secure the workpiece to a work bench or table with a vise or with clamps.  Make sure the saw blade is clear of any foreign material and that the power cord and extension cord are out of the blade path.  Mark the line of cut clearly .  Hold the saw firmly in front of and clearly away from y[...]

12 Fig. 7 MET AL CUTTING See Figure 7. Y ou may cut metals such as sheet steel, pipe, steel rods, aluminum, brass, and copper with the saw . Observe the following tips when metal cutting:  Be careful not to twist or bend the saw blade.  Do not force the tool and use a slow speed setting.  Use cutt ing oil whe n cutt ing soft metal s and st[...]

13 MAINTENANCE Electric tools used on fiber glass material, wallboard, spack- ling compounds, or plaster are subject to accelerated wear and possible premature failure because the fiberglass chips and grindings are highly abrasive to bearings, brushes, commutators, etc. Consequently , we do not recommend usi ng t hi s produc t for e xt en de d work[...]

RJ165V OPERA TOR’S MANUAL RECIPROCA TING SA W V ARIABLE SPEED DOUBLE INSULA TED RJ165V 987000-321 4-2-08 (REV :01) • P AR TS AND SERVICE Prior to requesting service or purchasing replacement parts, please obtain your model and serial number from the pr oduct data plate. • MODEL NUMBER • SERIAL NUMBER • HOW TO OBT AIN REPLACEMENT P AR TS: [...]