Samsung 210T инструкция обслуживания

SyncMaster 210T SyncMaster 240T TFT -LCD Monitor Owner’ s Instructions 240T(E)COVER.fm Page 1 Monday, October 23, 2000 7:17 PM[...]

Information in this document is subject to change without notice. © 2001 Samsung Electronics Co., Ltd. All rights reserved. Reproduction in any manner whatsoever without the written permission of Samsung Electronics Co., Ltd. is strictly forbidden. Samsung Electronics Co., Ltd. shall not be liable for errors contained herein or for incidental or c[...]

English 1 Fran•ais Deutsch Espa–ol P ortu- English Italiano Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Unpacking your Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .[...]

English 2 Safety Instructions 1 Before connecting the AC power cord to the DC adapter outlet, make sure the voltage designation of the DC adapter corresponds to the local electrical supply . 2 Never insert anything metallic into the cabinet openings of the Liquid Crystal Display (LCD) monitor; doing so may create the danger of electric shock. 3 T o[...]

English 3 English Français Deutsch Español Portuguese Italiano Please make sure the following items are included with your monitor. If any items are missing, contact your dealer. MENU EXIT AUTO PIP SOURCE V2 V1 Manual Warranty Card (not available in all locations) Installation CD S-VHS Cable Power Cord Monitor 15-pin D-Sub Signal Cable RCA Cable [...]

English 4 Setting up Y our LCD Monitor Setting up an Ergonomic W orkstation Consider the advice given below before you install your monitor. Monitor location Choose a position that exposes your monitor to the least reflection from lights or windows, usually at a right angle to any window. W orkstation height Place your LCD monitor so that the top o[...]

English 5 English Français Deutsch Español Portuguese Italiano Connecting Y our LCD Monitor Figure 3. Cable connections 1. Connect the power cord to the DC adaptor and connect the adaptor plug to the DC14V power connector 1 on the back of the monitor. 2. Connect the Analog video signal cable from PC to 2 . 3. Connect RCA cable from external video[...]

English 6 If you are experiencing the above, then please follow the steps given below to solve the problem. 1. T ouch the “MENU” button to bring up OSD window . 2. Select “Hz” menu. 3. Press “MENU” button seven times while keeping “Hz” menu highlighted. 4. The monitor’ s displayed mode will be changed from UXGA mode to WUXGA mode,[...]

English 7 English Français Deutsch Español Portuguese Italiano 1 Turn off both your computer and the monitor. 2 Unplug the video cable from the back of the computer. 3 Turn on the monitor. If the monitor is functioning properly, you will see a white box with a large blue oval Samsung logo and an error messsage “CHECK SIGNAL CABLE.” in black c[...]

English 8 User Controls Your LCD monitor allows you to easily adjust the characteristics of the image being displayed. All of these adjustments are made using the control buttons on the front of the monitor. While you use these buttons to adjust the controls, an OSD shows you their numeric values as they change. * 21" : SyncMaster 210T Figure [...]

English 9 English Français Deutsch Español Portuguese Italiano Automatic Save Whenever you open the OSD and allow an adjustment window to remain active for about 3 seconds without pressing other buttons, the monitor automatically saves any adjustment you have made. These changes are saved into a user area in the monitor. The monitor can save adju[...]

English 10 Direct Access Features OSD Lock/Unlock This function allows you to secure the current settings so that they cannot be inadvertently changed, while still allowing you to adjust the Brightness and Contrast. You can unlock the OSD controls at any time by using the same procedure. With the OSD screen off, push and hold the Menu button for at[...]

English 11 English Français Deutsch Español Portuguese Italiano On Screen Display(OSD) Figure 7. On Screen Display(OSD) Accessing the menu system 1 With the OSD off, push the Menu button to display the main OSD menu. 2 Use the " – , + " buttons to move from one function to another . As you move from one icon to another , the function [...]

English 12 OSD functions and adjustment T able 1. Screen controls Icon Menus and Sub-menus Function Descriptions – + Brightness Changes the overall light intensity of the images being displayed. Contrast Changes the ratio of light intensity between the brightest white and the darkest black. If "CONTRAST" ratio is set too high, color sat[...]

English 13 English Français Deutsch Español Portuguese Italiano n Fine n Coarse Although "Auto Adjustment" automatically finds the optimum values of FINE and COARSE parameters as well as image position, it may be necessary for you to adjust those parameters manually . It is recommended for you to use "Auto Adjustment" first.[...]

English 14 Image Size Aspect ratio is the proportion of a vertical versus a horizontal resolution, and it varies depending on the input video resolution. For example, 640x480, 800x600, and 1024x768 have the aspect ratio of 4:3, and 1280x1200 has the aspect ratio of 5:4. T o view original image without geometrical distortion, aspect ratio must be pr[...]

English 15 English Français Deutsch Español Portuguese Italiano Image Effect n Performs digital image quality compensation. n When an input video resolution is lower than 1920x1200 and if IMAGE SIZE is set to "Expand 1" or "Expand 2," then depending on the input video resolution, the expanded image becomes hazy or blurred. In [...]

English 16 PIP(Picture-in- Picture) n Shows a small sub-window superimposed on Video or PC. (Refer to page 9.) n When Video is a full screen video source, then PC will be appeared in a small window . Likewise, when PC is a full screen video source, then Video will be appeared in a small window . n The monitor remembers the previous state of Video a[...]

English 17 English Français Deutsch Español Portuguese Italiano PBP (Picture by picture) n Shows PC and V ideo side by side. n The monitor screen splits by half and one side is fi lled with PC and the other side is filed with V ideo. Again, the monitor remembers the previous state of PC and V ideo. Thus if the previous state of PC is D-Sub and [...]

English 18 Information n Shows the information of the current video signal. n The information includes the following n Video Signal T ype: Analog/Digital n Sync. T ypes and frequencies with polarities n Resolution n Example n The example shown above says the following. n Video Signal T ype: Analog PC video H_Sync: “+ / + ” 74.8 kHz V_Sync: “ [...]

English 19 English Français Deutsch Español Portuguese Italiano By Remote-Control Adjusting Y our LCD Monitor Input Source Change. Menu Key Exit Key Change PIP Size Zoom In Zoom Out (Zoom Exit: Exit) PBP Enable (PBP disable: Exit) PIP On, PIP Picture Swap PIP Off Power On/Off Display Current State (Right Up Corner Message) Auto Adjustment Left Ke[...]

English 20 PowerSaver This monitor has a built-in power management system called PowerSaver. This system saves energy by switching your monitor into a low-power mode when it has not been used for a certain period of time. The available modes are “On”, “Standby”, “Sleep”, and “Deep Sleep”. Power Saver operates with a VESA DPMS compli[...]

English 21 English Français Deutsch Español Portuguese Italiano T roubleshooting If you have a problem setting up or using your LCD monitor, you may be able to solve it yourself. Before contacting customer service, try the suggested actions that are appropriate to your problem. T able 3. T roubleshooting – Image What you see... Suggested Action[...]

English 22 Screen is blank and power indicator light is steady amber or blinks every 0.5 or 1 seconds ■ The monitor is using its power management system. ■ Move the computer’ s mouse or press a key on the keyboard Power Saver , page 20. Image is not stable and may appear to vibrate ■ Check that the display resolution and frequency from your[...]

English 23 English Français Deutsch Español Portuguese Italiano Specifications T able 4. T echnical and environmental specifications 210T 240T Panel Size Display Size T ype Pixel pitch Viewing Angle 21.3” Diagonal 432 (H) x 324 (V) mm a-si TFT Active matrix 0.27 (H) x 0.27 (V) mm 80˚/80˚/80˚/80˚ 24.06” Diagonal 518.4 (H) x 324 (V) mm a-[...]

English 24 Pin Assignments T able 5. 15 pin D-sub connector Pin Separate H/V Composite H/V Sync-on-green 1 Red Red Red 2 Green Green Green + H/V Sync 3 Blue Blue Blue 4 GND GND GND 5 GND (DDC Return) GND (DDC Return) GND (DDC Return) 6 GND-Red GND-Red GND-Red 7 GND-Green GND-Green GND-Green 8 GND-Blue GND-Blue GND-Blue 9 No Connection No Connection[...]

English 25 English Français Deutsch Español Portuguese Italiano Display Modes If the signal from the system equals to the standard signal mode, the screen is adjusted auto- matically . If the signal from the system doesn't equal to the standard signal mode, adjust the mode with referring to the Videocard user guide because the screen might n[...]

English 26 Changing the Base Removing the base 1 T urn off your monitor and unplug its power cord. 2 Lay the LCD monitor face-down on a flat surface with a cushion beneath it to protect the screen. 3 Remove the four screws and then remove the Stand from the LCD monitor . Appendix 26-27p-E Pages 26 - ??? Saturday, November 11, 2000 5:07 PM[...]

English 27 Attaching a base NOTE: This monitor accepts a 100mm x 100mm VESA-compliant mounting interface pad . 1 Align the Mounting Interface Pad with the holes in the Rear Cover Mounting Pad and secure it with the four screws that came with the arm-type base, wall mount hanger or other base. Maintenance of Y our LCD WARNING: T o avoid risk of elec[...]

English 28 Numerics 15-pin D-sub connector 24 A Auto 8 Automatic Save 9 B Brightness 12 C Cable connections 5 Coarse 13 Color Control 13 Contrast 12 D DC adapter 3 Display Modes 25 DVI-D signal cable 3 E Exit 10 F Fine 13 Function icons 11 H H-pan 15 H-position 13 I Image effect 15 Image lock 12 Image size 14 Information 18 Installation CD 3 K Kens[...]

Français Deutsch Español Portuguese English Italiano Regulator y Infor mation FCC Information User Instructions The Federal Communications Commission Radio Frequency Interference Statement includes the following warning: Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of t[...]

U.S.A.: Samsung Electronics America (SEA) One Samsung Place Ledgewood, NJ 07852 T el.: 1-800-SAMSUNG (1-800-726-7864) CANADA: Samsung Electronics Canada Inc. 7037 Financial Drive Mississauga, Ontario L5N 6R3 T el.: 1-800-SAMSUNG (1-800-726-7864) Fax.: (905) 542-1199 GERMANY : Samsung Electronics GmbH Samsung-Haus, Am Kronberger Hang 6 65824 Schwalb[...]