Samsung 460CXn инструкция обслуживания

SyncMaster 400CXN,460CXN LCD Display User Manual[...]

Safety Instructions Notational Note These safety instructions must be followed to ensure your safety and prevent property damage. Make sure to read the instructions carefully and use the product in the correct manner. Warning / Caution Failure to follow directions noted by this symbol could result in bodily harm or damage to the equipment. Notation[...]

Do not forcefully bend or pull the power plug and do not place any heavy material on it. • Otherwise, this may result in fire. Do not connect multiple appliances to the same power outlet. • Otherwise, this may cause fire due to overheating. Do not disconnect the power cord while using the product. • Otherwise, this may result in damage to the[...]

Do not install it in a badly ventilated location such as a bookcase or closet. • Otherwise, this may result in fire due to an increase in the internal temperature. When putting the product down, make sure to put it down softly. • Otherwise, this may result in damage to the screen display. Do not place the front of the product on the floor. • [...]

Clean the product using a soft cloth with a LCD Display cleaner only. If you must use a cleaner other than the LCD Display cleaner, dilute it with water at a ratio of 1:10. When cleaning the power plug pins or dusting the power outlet, clean it with a dry cloth. • Otherwise, it may result in fire. When cleaning the product, make sure to disconnec[...]

When you drop the product or the case is broken, turn the power off and disconnect the power cord. Contact a Service Center. • Otherwise, this may result in electric shock or fire. If thunder or lightening is occurring, do not touch the power cord or antenna cable. • Otherwise, this may result in electric shock or fire. Do not try to move the L[...]

When using headphones or earphones, do not turn the volume too high. • Having the sound too loud may damage your hearing. If you continually move closer to the product screen, your eyesight may be failing. Take a rest for at least five (5) minutes after using the LCD Display for one (1) hour. This reduces the weariness of your eyes. Do not instal[...]

Use only the specified standardized batteries, and do not use a new battery and a used battery at the same time. • Otherwise, the batteries may be damaged or cause fire, personal in- jury or damage due to a leakage of the internal liquid. The batteries (and rechargeable batteries) are not ordinary refuse and must be returned for recycling purpose[...]

Introduction Package Contents Note Please make sure the following items are included with your LCD Display. If any items are missing, contact your dealer. Contact a local dealer to buy optional items. Note This stand is not for the Floor Standing Type. Unpacking LCD Display Manuals Quick Setup Guide Warranty Card (Not available in all loca- tions) [...]

Others Remote Control Batteries (AAA X 2) (Not available in all loca- tions) Cleaning Cloth Sold separately DVI Cable Wall Mount KIT LAN Cable Semi Stand KIT Note Cleaning Cloth is only provided for highly polished black products as a product feature. Your LCD Display Front MENU button [MENU] Opens the on-screen menu and exits from the menu. Also u[...]

Adjust buttons (Left-Right buttons) / Volume buttons Moves from one menu item to another horizontally or adjusts selected menu val- ues. When OSD is not on the screen, push the button to adjust volume. ENTER button [ENTER] Activates a highlighted menu item. SOURCE button [SOURCE] Switches from PC mode to Video mode. Changing the source is only allo[...]

POWER S/W ON [ │ ] / OFF [O] Switches the LCD Display On/Off. POWER IN The power cord plugs into the LCD Display and the wall plug. RS232C OUT/IN (RS232C Serial PORT) MDC(Multiple Display Control) Program Port DVI / PC / HDMI IN [DVI/PC/HDMI AUDIO IN] (PC/DVI/HDMI Audio Connection Terminal (Input)) DVI / PC / HDMI IN [HDMI] Connect the HDMI termi[...]

AV IN [VIDEO] (VIDEO Connection Termi- nal) AV AUDIO IN [L-AUDIO-R](LCD Display Audio Connection Terminal (Input)) AUDIO OUT [L-AUDIO-R] (LCD Display Audio Connection Terminal (Output)) COMMON INTERFACE This contains information on CAM inserted in the CI slot and displays it. When not inserting CI CARD in some channels, Scramble Signal is displayed[...]

Kensington Lock The Kensington Lock is a device used to physi- cally fix the system when using it in a public place. The locking device has to be purchased separately. The appearance and locking method may differ from the illustration depending on the manufacturer. Refer to the manual provided with the Kensington Lock for proper use. The locking de[...]

POWER OFF Number Buttons DEL button + VOL - MUTE TV/DTV MENU INFO COLOR BUTTONS TTX/MIX STILL AUTO S.MODE MDC LOCK SOURCE ENTER/PRE-CH CH/P D.MENU GUIDE RETURN Up-Down Left-Right buttons EXIT SRS MagicInfo P.MODE DUAL/MTS PIP SWAP 1. POWER Turns the product On. 2. Off Turns the product Off. 3. Number Buttons Press to change the channel. Introductio[...]

4. DEL button The "-" button operates only for DTV. It is used to select MMS (multi-channel) for a DTV. 5. + VOL - Adjusts the audio volume. 6. MUTE Pauses (mutes) the audio output temporarily. This is displayed on the lower left corner of the screen. The audio resumes if MUTE or - VOL + is pressed in the Mute mode. 7. TV/DTV Selects the [...]

24. Up-Down Left-Right but- tons Moves from one menu item to another horizontally, vertically or adjusts selected menu values. 25. EXIT Exits from the menu screen. 26. SRS Not Available. 27.MagicInfo MagicInfo Quick Launch Button. 28. P.MODE When you press this button, current picture mode is displayed on the lower center of the screen. AV / HDMI /[...]

Mechanical Layout (400CXn) Mechanical Layout NETWORK MODEL SIZE Introduction[...]

LCD Display Head NETWORK MODEL SIZE Installation VESA Bracket • When installing VESA, make sure to comply with the international VESA standards. • Purchasing VESA Bracket and Installation Information : Please contact your nearest SAMSUNG Distributor to place an order. After your order is placed, installation professionals will visit you and ins[...]

Dimensions Notice For securing the bracket on a wall, use only machine screws of 6 mm diameter and 8 to 12 mm length. Wall Bracket Installation • Contact a technician for installing the wall bracket. • SAMSUNG Electronics is not responsible for any damages to the product or harm to customers when the installation is done by the customer. • Th[...]

When done, mount the wall bracket on the wall. There are two hinges(left and right). Use the correct one. A - Captive Screw B - Wall Bracket C - Hinge (Left) D - Hinge (Right) 2. Before drilling into the wall, check if the length between the two locking holes at the back of the product is correct. If the length is too short or long, loosen all or s[...]

To mount the product on the wall bracket The shape of the product may vary depending on the model. (The assemblies of the plastic hanger and the screw are the same) 1. Remove the 4 screws on the back of the product. 2. Insert the screw B into the plastic hanger. Notice • Mount the product on the wall bracket and make sure it is properly fixed to [...]

4. Remove safety pin (3) and insert the 4 product holders into the corresponding bracket holes (1). Then place the product(2) so that it is firmly fixed to the bracket. Make sure to re-insert and tighten the safety pin (3) to securely hold the product to the bracket. A - LCD Display B - Wall Bracket C - Wall Wall Bracket Angle Adjustment Adjust the[...]

Make sure to use the top center, and not the leftor the right side of the product to adjust the angle. Mechanical Layout (460CXN) Mechanical Layout NETWORK MODEL SIZE Introduction[...]

LCD Display Head NETWORK MODEL SIZE Installation VESA Bracket • When installing VESA, make sure to comply with the international VESA standards. • Purchasing VESA Bracket and Installation Information : Please contact your nearest SAMSUNG Distributor to place an order. After your order is placed, installation professionals will visit you and ins[...]

Notice For securing the bracket on a wall, use only machine screws of 6 mm diameter and 8 to 12 mm length. Wall Bracket Installation • Contact a technician for installing the wall bracket. • SAMSUNG Electronics is not responsible for any damages to the product or harm to customers when the installation is done by the customer. • This product [...]

A - Captive Screw B - Wall Bracket C - Hinge (Left) D - Hinge (Right) 2. Before drilling into the wall, check if the length between the two locking holes at the back of the product is correct. If the length is too short or long, loosen all or some of the 4screws on the wall bracket to adjust the length. A - Length between the two locking holes 3. C[...]

1. Remove the 4 screws on the back of the product. 2. Insert the screw B into the plastic hanger. Notice • Mount the product on the wall bracket and make sure it is properly fixed to the left and right plastic hangers. • Be careful when installing the product on the bracket as fingers can be caught in the holes. • Make sure the wall bracket i[...]

A - LCD Display B - Wall Bracket C - Wall Wall Bracket Angle Adjustment Adjust the bracket angle to -2° before installing it on the wall. 1. Fix the product to the wall bracket. 2. Hold the product at the top in the center and pull it forward (direction of the arrow) to adjust the angle. 3. You can adjust the bracket angle between -2° and 15°. M[...]

Connections Connecting a Computer Using a Power cord with Earth • In the event of failure, the earth lead may cause electric shock. Make sure to wire the earth lead in correctly, before connecting the AC power. When un- wiring the earth lead, make sure to disconnect the AC power in advance. Note AV input devices such as DVD players, VCR's or[...]

Connect the audio cable for your LCD Display to the audio port on the back of your computer. Note • Turn on both your computer and the LCD Display. • The DVI cable is optional. • Contact a local SAMSUNG Electronics Service Center to buy optional items. Connecting to Other devices Using a Power cord with Earth • In the event of failure, the [...]

• When using an outdoor antenna: If you are using an outdoor antenna, use a professional for installation if possible. • To connect the RF cable to the antenna input terminal: Keep the copper wire portion of the RF cable straight. 2. Turn on the LCD Display. 3. Select TV using the TV / DTV. 4. Select a desired TV channel. Note Is weak signal ca[...]

1. Connect the port of the DVD, VCR (DVD / DTV Set-Top Box) to the [R-AUDIO-L] port of the LCD Display. 2. Then, start the DVD, VCR or Camcorders with a DVD disc or tape inserted. 3. Select AV using the SOURCE . Note The LCD Display has AV connection terminals to connect AV input devices like DVDs, VCRs or Camcorders. You may enjoy AV signals as lo[...]

• You cannot connect a PC to the HDMI terminal. Connecting Using a DVI to HDMI Cable Note • Connect the DVI output terminal of a digital output device to the HDMI terminal of the LCD Display using a DVI to HDMI cable. • Connect the red and white jacks of an RCA to stereo (for PC) cable to the same colored audio output terminals of the digital[...]

Note Connect the LAN cable. Connecting a USB device Using a Power cord with Earth • In the event of failure, the earth lead may cause electric shock. Make sure to wire the earth lead in correctly, before connecting the AC power. When un- wiring the earth lead, make sure to disconnect the AC power in advance. Note AV input devices such as DVD play[...]

Using the Software Monitor Driver Note When prompted by the operating system for the monitor driver, insert the CD-ROM included with this monitor. Driver installation is slightly different from one operating system to another. Follow the directions appropriate for the operating system you have. Prepare a blank disk and download the driver program f[...]

Note This monitor driver is under certifying MS logo, and this installation doesn't damage your system. The certified driver will be posted on Samsung Monitor homepage. http://www.samsung.com/ Installing the Monitor Driver (Manual) Microsoft ® Windows Vista™‚ Operating System 1. Insert your Manual CD into your CD-ROM drive. 2. Click (Star[...]

Note This monitor driver is under certifying MS logo, and this installation doesn't damage your system. The certified driver will be posted on Samsung Monitor homepage. 6. Click "Update Driver..." in the "Driver" tab. 7. Check the "Browse my computer for driver software" checkbox and click "Let me pick from a[...]

9. Select the model that matches your monitor from the list of monitor models on the screen, and click "Next". 10. Click "Close" → "Close" → "OK" → "OK" on the following screens displayed in sequence. Microsoft ® Windows ® XP Operating System Using the Software[...]

1. Insert CD into the CD-ROM drive. 2. Click "Start" → "Control Panel" then click the "Appearance and Themes" icon. 3. Click "Display" icon and choose the "Settings" tab then click "Advanced...". 4. Click the "Properties" button on the "Monitor" tab and select "D[...]

7. Click the "Browse" button then choose A:(D:Driver) and choose your monitor model in the model list and click the "Next" button. 8. If you can see following message window, then click the "Continue Anyway" button. Then click "OK" button. Note This monitor driver is under certifying MS logo, and this instal[...]

10. Monitor driver installation is completed. Microsoft ® Windows ® 2000 Operating System When you can see "Digital Signature Not Found" on your monitor, follow these steps. 1. Choose "OK" button on the "Insert disk" window. 2. Click the "Browse" button on the "File Needed" window. 3. Choose A:(D:[...]

4. Select the "Monitor" tab. 5. Click the "Change" button in the "Monitor Type" area. 6. Choose "Specify the location of the driver". 7. Choose "Display a list of all the driver in a specific location..." then click "Next" button. 8. Click the "Have Disk" button. 9. Specify A:(D[...]

Installation MagicInfo Pro Installation 1. Insert CD into the CD-ROM drive. 2. Click the MagicInfo Pro installation file. 3. When the Install Shield Wizard window appears, click "Next." 4. Select "I agree to the terms of the license agreement" to accept the terms of use. 5. You are required to log in to the MagicInfo Pro Server [...]

6. Choose a folder to install the MagicInfo Pro program. 7. Click "Install." Using the Software[...]

8. The "Setup Status" window appears. 9. It is recommended restarting the system for the normal operation of the MagicInfo Pro Server program. Click "Finish." Using the Software[...]

10. When the installation is complete, the MagicInfo Pro executable icon appears on your desktop. 11. Double-click the icon to start the program. System Requirements CPU RAM Ethernet OS Application Minimum P1.8 256M 100M/1G Windows XP Windows 2000 (Serv- ice Pack 4) WMP 9 or later Recommen- ded P3.0Ghz 512M Using the Software[...]

Adjusting the LCD Display Input Available Modes • PC / DVI • AV • HDMI • MagicInfo • TV Source List MENU → ENTER → [ Input ] → ENTER → [ Source List ] → , → ENTER Use to select PC , DVI or other external input sources connected to the LCD Display. Use to select the screen of your choice. 1. PC 2. DVI 3. AV 4. HDMI 5. MagicInfo[...]

→ , → ENTER Name the input device connected to the input jacks to make your input source selection easier. 1. PC 2. DVI 3. AV 4. HDMI Picture [ PC / DVI / MagicInfo Mode] Available Modes • PC / DVI • AV • HDMI • MagicInfo • TV MagicBright MENU → → ENTER → [ Picture ] → ENTER → [ MagicBright ] → , → ENTER MagicBright is a[...]

1. Entertain High brightness For watching motion pictures such as a DVD or VCD. 2. Internet Medium brightness For working with a mixture of images such as texts and graphics. 3. Text Normal brightness For documents or works involving heavy text. 4. Custom Although the values are carefully chosen by our engineers, the pre-configured values may not b[...]

→ , → ENTER Adjusts the Sharpness. Color Tone MENU → → ENTER → [ Picture ] → → →ENTER → [ Color Tone ] → , → ENTER The color tones can be changed. (Not available in Dynamic Contrast mode of On .) 1. Off 2. Cool 3. Normal 4. Warm 5. Custom Note If you set the Color Tone to Cool , Normal , Warm , or Custom , the Color Temp funct[...]

→ , → ENTER Green MENU → → ENTER → [ Picture ] → → → → ENTER → [ Color Control ] → → ENTER → [ Green ] → , → ENTER Blue MENU → → ENTER → [ Picture ] → → → → ENTER → [ Color Control ] → → → ENTER → [ Blue ] → , → ENTER Color Temp MENU → → ENTER → [ Picture ] → → → → ENTER → [ [...]

Removes noise such as vertical stripes. Coarse adjustment may move the screen image area. You may relocate it to the center using the horizontal control menu. Fine MENU → → ENTER → [ Picture ] → → → → → ENTER → [ Image Lock ] → → ENTER → [ Fine ] → , → ENTER Removes noise such as horizontal stripes. If the noise persists[...]

(Available in PC mode only) Signal Balance MENU → → ENTER → [ Picture ] → → → → → → → ENTER → [ Signal Balance ] → ENTER → [ Signal Balance ] → , → ENTER Selects either On or Off with the signal control. Signal Control MENU → → ENTER → [ Picture ] → → → → → → → ENTER → [ Signal Balance ] → → E[...]

→ , → ENTER 5. G-Offset MENU → → ENTER → [ Picture ] → → → → → → → ENTER → [ Signal Bal- ance ] → → ENTER → [ Signal Control ] → → → → → ENTER → [ G-Offset ] → ENTER → , → ENTER 6. B-Offset MENU → → ENTER → [ Picture ] → → → → → → → ENTER → [ Signal Bal- ance ] → → ENTER ?[...]

Dynamic Contrast automatically detects the distribution of the visual signal and adjusts to create an optimum contrast. 1. Off 2. On Picture [ AV / HDMI / TV Mode] Available Modes • PC / DVI • AV • HDMI • MagicInfo • TV Mode MENU → → ENTER → [ Picture ] → ENTER → [ Mode ] → , → ENTER The LCD Display has four automatic pictur[...]

(Not available in Dynamic Contrast mode of On .) Contrast MENU → → ENTER → [ Picture ] → → ENTER → [ Custom ] → ENTER→ [ Contrast ] → , → ENTER Adjusts the Contrast. Brightness MENU → → ENTER → [ Picture ] → → ENTER → [ Custom ] → → ENTER→ [ Brightness ] → , → ENTER Adjusts the Brightness. Sharpness MENU ?[...]

Color Tone MENU → → ENTER → [ Picture ] → → → ENTER → [ Color Tone ] → , → ENTER The color tones can be changed. The individual Color components are also user adjustable. (Not available in Dynamic Contrast mode of On .) 1. Off 2. Cool2 3. Cool1 4. Normal 5. Warm1 6. Warm2 Note If you set the Color Tone to Cool2 , Cool1 , Normal , [...]

→ , → ENTER The Size can be switched. 1. 16:9 2. Zoom 1 3. Zoom 2 4. 4:3 5. Just Scan (Not available in Dynamic Contrast mode of On .) Note The Zoom1 , Zoom2 are not available HDMI . The Just Scan are available in HDMI . Digital NR (Digital Noise Reduction) MENU → → ENTER → [ Picture ] → → → → → → ENTER → [ Digital NR ] → [...]

→ , → ENTER Turns Film Mode Off / On . The Film Mode feature offers you a theater-quality viewing experience. (Not available in HDMI Mode) 1. Off 2. On Dynamic Contrast MENU → → ENTER → [ Picture ] → → → → → → → → ENTER → [ Dynamic Contrast ] → , → ENTER Dynamic Contrast automatically detects the distribution of the [...]

1. Off 2. On Sound Available Modes • PC / DVI • AV • HDMI • MagicInfo • TV Mode MENU → → → ENTER → [ Sound ] → ENTER → [ Mode ] → , → ENTER The LCD Display has a built-in high fidelity stereo amplifier. 1. Standard Selects Standard for the standard factory settings. 2. Music Selects Music when watching music videos or conc[...]

Note • You can hear the sound even when sound value is set to 0. • If you adjust sound using Custom function, Mode will turn to Custom mode. Bass MENU → → → ENTER → [ Sound ] → → ENTER → [ Custom ]→ENTER→ [ Bass ] → , → ENTER Emphasizes low frequency audio. Treble MENU → → → ENTER → [ Sound ] → → ENTER → [ Cu[...]

SRS TS XT MENU → → → ENTER → [ Sound ] → → → → ENTER → [ SRS TS XT ] → , → ENTER SRS TS XT is a patented SRS technology that solves the problem of playing 5.1 multichannel content over two speakers. TruSurround delivers a compelling, virtual surround sound experience through any two-speaker playback system, including internal [...]

Note The language chosen affects only the language of the OSD. It has no effect on any software running on the computer. Time Selects from one of 4 time settings, Clock Set , Sleep Timer , On Timer , and Off Timer . MENU → → → → ENTER → [ Setup ] → → ENTER → [ Time ] Clock Set MENU → → → → ENTER → [ Setup ] → → ENTER ?[...]

6. 150 7. 180 On Timer MENU → → → → ENTER → [ Setup ] → → ENTER → [ Time ] → → → ENTER → [ On Timer ] → , / , → ENTER Turns the LCD Display on automatically at a preset time. Controls the mode and the volume level at the time the LCD Display turns on automatically. Off Timer MENU → → → → ENTER → [ Setup ] → ?[...]

1. High 2. Medium 3. Low 4. Opaque Safety Lock PIN MENU → → → → ENTER → [ Setup ] → → → → ENTER → [ Safety Lock PIN ] → [0∼ 9] → [0∼ 9] → [0∼ 9] The password can be changed. Energy Saving MENU → → → → ENTER → [ Setup ] → → → → → ENTER → [ Energy Saving ] → , → ENTER This feature adjusts the [...]

→ , → ENTER When a DVD or set-top box is connected to your TV via HDMI, it may cause a degradation in the screen quality, such as an increase in the black level, a low contrast, or discoloration, etc., depending on the external device connected. In this case, adjust the screen quality of your TV by configuring the HDMI black level . 1. Normal 2[...]

Format MENU → → → → ENTER → [ Setup ] → → → → → → → ENTER → [ Video Wall ]→ → ENTER → [ Format ] → , → ENTER The Format can be selected to see a divided screen. 1. Full Provides a full screen without any margins. 2. Natural Displays a natural image with the original aspect ratio intact. Horizontal MENU → → ?[...]

→ , → ENTER Sets how many parts the screen should be divided vertically. Five adjustment levels: 1, 2, 3, 4, and 5. Screen Divider MENU → → → → ENTER → [ Setup ] → → → → → → → ENTER → [ Video Wall ]→ → → → → ENTER → [ Screen Divider ] The screen can be divided into several images. A number of screens can be[...]

1. Off 2. On Horizontal Dot MENU → → → → ENTER → [ Setup ] → → → → → → → → ENTER → [ Safety Screen ] → ENTER → [ Pixel Shift ] → → ENTER → [ Horizontal Dot ] → , → ENTER Sets how many pixels the screen moves horizontally. Five adjustment levels: 0, 1, 2, 3, and 4. Vertical Line MENU → → → → ENTER ?[...]

Timer Timer MENU → → → → ENTER → [ Setup ] → → → → → → → → ENTER → [ Safety Screen ] → → ENTER → [ Timer ] → ENTER → [ Timer ] → , → ENTER You can set the timer for Screen Burn Protection. If you start the operation to erase any residual image, the operation will be performed for the set period of time and [...]

Use this function to set the execution period for each mode set in the timer. Time MENU → → → → ENTER → [ Setup ] → → → → → → → → ENTER → [ Safety Screen ] → → ENTER → [ Timer ] → → → → ENTER → [ Time ] → , → ENTER Within the set period of time specify a time for execution. • Mode - Scroll : 1~5 sec[...]

Eraser MENU → → → → ENTER → [ Setup ] → → → → → → → → ENTER → [ Safety Screen ] → → → → →ENTER → [ Eraser ] This function prevents after-images on the screen by moving a rectangular pattern. Resolution Select MENU → → → → ENTER → [ Setup ] → → → → → → → → → ENTER → [ Resolution S[...]

→ , → ENTER Adjusts the Power On time for the screen. Caution: Set the Power On time to be loger to avoid overvoltage. Side Gray MENU → → → → ENTER → [ Setup ] → → → → → → → → → → → ENTER → [ Side Gray ] → , → ENTER Select the brightness of the grey for the screen background. 1. Off 2. Light 3. Dark Reset R[...]

Note Available in PC mode only Note The Reset function is not available when Video Wall is On . Color Reset MENU → → → → ENTER → [ Setup ] → → → → → → → → → → → → ENTER → [ Reset ]→ → ENTER → [ Color Reset ] → , → ENTER Lamp Control MENU → → → → ENTER → [ Setup ] → → → → → → → ?[...]

→ , → [0~9] • ID Setup Assigns distinctive IDs to the SET. • ID Input Use to select the transmitter functions of the individual SET. Only a SET where the ID corresponds to the transmitter setting becomes activated. MagicInfo Available Modes • PC / DVI • AV • HDMI • MagicInfo • TV Note • The operating system for this set only sup[...]

• To setup MagicInfo on a Windows screen, a keyboard and mouse are required. • To setup MagicInfo on a Windows screen, refer to the MagicInfo Server Help. It is highly recommended not to turn off the AC power during an operation. • For pivoted LCD Displays, ticker transparency is not supported. • For pivoted LCD Displays, a screen resolutio[...]

Slide Show Displays the properties of the original file as they are. Interval Controls the time intervals between image files for a slide show. (5 Sec , 10 Sec , 20 Sec , 30 Sec , 60 Sec ) Adjusting the LCD Display[...]

Rotation Displays an image file by turning it clockwise by 90 degrees. Zoom Displays a reduced picture. Adjusting the LCD Display[...]

Close Closes the image control Menu. Music The MP3 file format is supported. Movie The MPEG1, WMV file format are supported. Adjusting the LCD Display[...]

Play Plays a movie file. Full Size Plays a movie file in full screen. Adjusting the LCD Display[...]

OFFICE / HTML PPT(Power Point), DOC(MS Word), XLS(MS Excel), PDF, HTML, HTM files are displayed. Note • Install the proper viewer(freeware) program to see the MS Office(Word, Excel, Power Point) or PDF doucuments. Internet Connects to the Internet Setup Sets various functions in MagicInfo mode. A password must be entered to access Setup mode. Adj[...]

Schedule View Displays a schedule. TCP/IP Changes the TCP/IP settings. Adjusting the LCD Display[...]

Connection Modifies the network settings. Password The password can be changed. • The password should be between 6 and 12 characters in numeric format. (You should enter a password between 6 and 12 characters in numeric format) • If you enter the wrong password three times, the setup configuration is reset and a warning message appears from the[...]

• If you forget the password, enter Info, 8, 2 and 4 on the remote control to initialize the password. This will reset the previous settings of Setup mode. File Local : You can delete or copy files on both local and removable disks. Play Option You can set the repeat play and screen settings. Repeat : Determines the repeat option for playing movi[...]

• File Repeat - Select Repeat File to play a movie or tune in the list repeatedly. • List Repeat - Select Repeat List to play movies or tunes in the list in sequence repeatedly. Rotation - Sets the picture orientation. • Landscape - Sets the screen resolution to 1366x768 pixels. • Portrait - Sets the screen resolution to 768x1366 pixels. EW[...]

: Sets the picture to 16:9 wide mode. 3. Wide Zoom : Magnify the size of the picture more than 4:3. 4. Zoom : Magnifies the size of the picture on the screen. 5. 4:3 : Sets the picture to 4:3 normal mode. 6. Just Scan : Use the function to see the full image without any cutoff when HDMI (720p/1080i/1080p), DTV (1080i) signals are input. Note Auto W[...]

→ , → ENTER Select the country in which the product is being used before you use the Auto Store feature. If you do not see your country in the list, select Others. Auto Store D.MENU → →[ Channel ] → ENTER → → ENTER →[ Auto Store ] You can scan the frequency ranges available on your television in your area and store all the channels [...]

Colour System D.MENU → → [ Channel ] → ENTER → → → ENTER → [ Manual Store ] → →ENTER → [ Colour System ] → , → ENTER Adjusts repeatedly until the colour is of the best quality. ( Auto <-> PAL <-> SECAM <-> NTSC4.43 ) Sound System D.MENU → →[ Channel ] → ENTER → → → ENTER →[ Manual Store ] → [...]

- S (Cable channel mode): You can select a channel by entering the assigned number for each cable channel in this mode. Search D.MENU → →[ Channel ] → ENTER → → → ENTER →[ Manual Store ] → → → → → ENTER→ [ Search ] → , → ENTER The tuner scans the frequency range until the first channel or the channel that you selected [...]

You can add or delete a channel so only channels you want are displayed. is active when Child Lock is selected to On. Child Lock D.MENU → →[ Channel ] → ENTER → → → → ENTER →[ Channel Manager ] → →ENTER → [ Child Lock ] → , → ENTER Protects children from viewing inappropriate programs by blocking certain broadcast or video[...]

Fine Tune D.MENU → →[ Channel ] → ENTER → → → → → → → ENTER →[ Fine Tune ] → , / , → ENTER Due to weak signals or an incorrect antenna configuration, some of the channels may not be tuned correctly. LNA D.MENU → →[ Channel ] → ENTER → → → → → → → → ENTER →[ LNA ] → , → ENTER Turns the low noise [...]

The language chosen affects only the language of the OSD. Digital Menu Guide Now & Next Guide D.MENU → → → →[ Digital Menu ] → ENTER→[ Guide ] → ENTER→ENTER →[ Now & Next Guide ] For the six channels indicated in the left-hand column, displays the Current programme and the Next programme information. Full Guide D.MENU → [...]

Scheduled List D.MENU → → → →[ Digital Menu ] → ENTER →[ Guide ] → ENTER → → → ENTER → [ Scheduled List ] If you make a scheduled viewing list of programs you may like to see, the channel will be automatically switched to the scheduled Programme at the scheduled time even if you are watching another program. You can also set h[...]

5. Delete Delete the selected schedule. Default Guide D.MENU → → → →[ Digital Menu ] → ENTER→ [ Guide ] → ENTER → → → →ENTER → [ Default Guide ] → , → ENTER You can preset the default guide style. 1. Now/Next 2. Full Guide Digital Channel Country D.MENU → → → → [ Digital Menu ] → ENTER → → [ Digital Channel[...]

Note • Even though you have changed the country setting in this menu, the country setting for Analog TV is not changed . • When it has finished, the number of scanned services will be displayed. • The existing favourite channel list will not be deleted when the channel list is updated. • To stop the scan before it has finished, press the EN[...]

Note • A " " icon is shown next to the selected channel and the channel will be added to the favourite channel list. • To undo, press the ENTER button again. • Select All : Select all channels currently displayed. • Select None : Deselect all selected channels. • Preview : Displays (a) currently selected channel(s). The Favorite[...]

Preview • D.MENU → → → →[ Digital Menu ] → ENTER → →[ Digital Channel ]→ENTER → → → →[ Edit Favourite Channels ] → ENTER Press the yellow button The selected channel is displayed on the screen. Delete • D.MENU → → → →[ Digital Menu ] → ENTER → →[ Digital Channel ]→ENTER → → → →[ Edit Favourite C[...]

• The channel number, name and an icon are displayed in the top left corner while changing the channel. • The channel number and name are displayed if the channel is one of the all channels, and a icon if the channel is one of the favourite channels. Setup Menu Transparency D.MENU → → → →[ Digital Menu ] → ENTER→ → →[ Setup ]→[...]

→ , → ENTER This feature allows you to prevent unauthorized users, such as children, from watching unsuitable programmes by a 4-digit PIN (Personal Identification Number) code that is defined by the user. The on-screen menu will instruct you to assign a PIN code (you can change it later, if necessary). Note • The default PIN code for a new TV[...]

2. Hard of hearing Note • If the programme you are watching does not support the " Hard of hearing " function, " Normal " automatically activates even though " Hard of hearing " mode is selected. Audio Format D.MENU → → → →[ Digital Menu ] → ENTER→ → →[ Setup ]→ENTER → → → → → → [ Audio [...]

1. Audio Description - Off , On 2. Volume Note • " Volume " is active when " Audio Description " is set to " On ". Digital Text D.MENU → → → →[ Digital Menu ] → ENTER→ → →[ Setup ]→ENTER → → → → → → → → [ Digital Text ] → ENTER → , → ENTER If the programme is broadcast with dig[...]

Note • The following options are available The Iberian Peninsula and Balears Islands - Canarian Islands Common Interface D.MENU → → → →[ Digital Menu ] → ENTER→ → →[ Setup ]→ENTER → → → → → → → → → → [ Common Interface ] 1. Application Info 2. CI Menu System D.MENU → → → →[ Digital Menu ] → ENTER→[...]

D.MENU → → → →[ Digital Menu ] → ENTER→ → →[ Setup ]→ENTER → → → → → → → → → → → [ System ] → ENTER → → →ENTER • Software Information • Manual Upgrade • Standby Mode upgrade 4. Reset D.MENU → → → →[ Digital Menu ] → ENTER→ → →[ Setup ]→ENTER → → → → → → → → → [...]

You can change the default value for subtitle, audio teletext languages. Displays the language infor- mation for the incoming stream. Note • English is the default in cases where the selected language is unavailable in the broadcast. Subtitle Language D.MENU → → → →[ Digital Menu ] → ENTER → → → →[ Language ]→ ENTER → → EN[...]

This menu consists of 6 sub-menus: Primary Subtitle Language , Secondary Subtitle Language , Primary Audio Language , Secondary Audio Language , Primary Teletext Language . 1. Primary Audio Language 2. Secondary Audio Language 3. Primary Subtitle Language 4. Secondary Subtitle Language 5. Primary Teletext Language Note • If you change the languag[...]

Troubleshooting Self-Test Feature Check Note Check the following items yourself before calling for assistance. Contact a Service Center for problems that you cannot solve by yourself. Self-Test Feature Check 1. Turn off both your computer and the LCD Display. 2. Unplug the video cable from the back of the computer. 3. Turn on the LCD Display. The f[...]

• Do not use benzene, thinner or other flammable substan- ces, or a wet cloth. • We recommend that a SAMSUNG cleansing agent is used to prevent damage to the screen. 2) Maintaining the Flat Panel Display Screen. Clean with a soft cloth (cotton flannel) smoothly. • Never use acetone, benzene or thinner. (They may cause flaws or deformation of [...]

PC Mode Q: The LCD Display screen flickers. A: Check if the signal cable between the computer and the LCD Display is securely connected. (Refer to Connecting a Computer) TV Mode Q: TV screen is blurred or shows noise signals. A: Check if the TV antenna connector is securely connected to the external antenna.(Refer to Connecting TV) Q: TV signal is [...]

A: Check if the resolution and frequency set for the computer video card falls in the range supported by the LCD Display. If not, reset them referring to the current Information under the LCD Display menu and Preset Timing Modes. Q: Ghost images are shown in the picture. A: Check if the resolution and frequency set for the computer video card falls[...]

A: If the volume is still too low after turning the control to its maximum, check the volume control on the computer sound card or software program. Q: The sound is too high or too low. A: Adjusts the Treble and Bass to the appropriate levels. Problems related to the Remote Control Note Problems related to the remote control and their solutions are[...]

Set the resolution in the Control Panel → Appearance and Themes → Display → Settings. A: Windows ME/2000: Set the resolution in the Control Panel → Display → Settings. * Contact the video card manufacturer for details. Q: How can I set the Power Saving function? A: Windows XP: Set the resolution in the Control Panel → Appearance and The[...]

A: An SDTV has an aspect ratio of 4:3 which is the same as that of an analog TV. HDTV has an aspect ratio of 16:9 which is similar to a cinema screen. This provides a much better screen quality than SDTV. It's like having a theater in your home. A: Digital TV broadcasting in our country is ultimately orientated towards HDTV. Q: Can I watch HD [...]

Specifications General General Model Name SyncMaster 400CXN LCD Panel Size 40 " Diagonal (101 cm) Display area 885.17 mm (H) X 497.7 mm (V) Pixel Pitch 0.648 mm (H) X 0.648 mm (V) Synchronization Horizontal 30 ~ 81 kHz Vertical 56 ~ 85 Hz Display Color 16.7 M Resolution Optimum resolution 1360 x 768 @ 60 Hz / 1366 x 768 @ 60 Hz depends on grap[...]

VESA Mounting Interface 600 x 400 mm Environmental considerations Operating Temperature : 50°F ~ 104°F (10°C ~ 40°C) Humidity : 10 % ~ 80 %, non-condensing Storage Temperature : -4°F ~ 113°F (-20°C ~ 45°C) Humidity : 5 % ~ 95 %, non-condensing Plug and Play Capability This LCD Display can be installed on any Plug & Play compatible syste[...]

Item Specification Remarks Office (Word, Excel, Power Point) or PDF documents. Internet Browser MS Internet Explorer Not Support Flash, Java Applet, Security Site Language English OS Windows XP Embedded MagicInfo Pro - Server Requirement CPU RAM Ethernet OS Application Minimum P1.8 GHz 256 M 100 M / 1 G Windows XP WMP 9 or lat- er Recommended P3.0 [...]

Display Mode Horizontal Frequency (kHz) Vertical Fre- quency (Hz) Pixel Clock (MHz) Sync Polarity (H/V) VESA, 640 x 480 37.500 75.000 31.500 -/- VESA, 800 x 600 35.156 56.250 36.000 +/+ VESA, 800 x 600 37.879 60.317 40.000 +/+ VESA, 800 x 600 48.077 72.188 50.000 +/+ VESA, 800 x 600 46.875 75.000 49.500 +/+ VESA, 848 x 480 31.020 60.000 33.750 +/+ [...]

Display Color 16.7 M Resolution Optimum resolution 1920 x 1080 @ 60 Hz Maximum resolution 1920 x 1080 @ 60 Hz Input Signal, Terminated RGB Analog, DVI(Digital Visual Interface) Compliant Digital RGB 0.7 Vp-p ±5 % Separate H/V sync, Composite, SOG TTL level (V high ≥ 2.0 V, V low ≤ 0.8 V) Maximum Pixel Clock 165MHz (Analog,Digital) Power Supply[...]

Dot Acceptable TFT-LCD panels manufactured by using advanced semiconductor technology with preci- sion of 1ppm (one millionth) above are used for this product. But the pixels of RED, GREEN, BLUE and WHITE color appear to be bright sometimes or some black pixels may be seen. This is not from bad quality and you can use it without any problems. For e[...]

PowerSaver This LCD Display has a built-in power management system called PowerSaver. This system saves energy by switching your LCD Display to low-power mode when it has not been used for a certain amount of time. The LCD Display automatically returns to normal operation when you press a key on the keyboard. For energy conservation, turn your LCD [...]

Display Mode Horizontal Frequency (kHz) Vertical Fre- quency (Hz) Pixel Clock (MHz) Sync Polarity (H/V) VESA, 1360 x 768 47.712 60.015 85.500 +/+ VESA, 1600 x 1200 75.000 60.000 162.000 +/+ VESA, 1920 x 1080 66.587 59.934 138.500 +/- Horizontal Frequency The time to scan one line connecting the right edge to the left edge of the screen horizontally[...]

Information For Better Display Adjust the computer resolution and screen injection rate (refresh rate) on the computer as described below to enjoy the best picture quality. You can have an uneven picture quality on screen if the best picture quality is not provided for TFT-LCD. • Resolution: 1360(1920) x 768(1080) • Vertical frequency (refresh [...]

Power Off, Screen Saver, or Power Save Mode • Turn the power off for 4 hours after 20 hours in use • Turn the power off for 2 hours after 12 hours in use • Set the LCD Display to power off with the PC Display Properties Power Scheme. • Use a Screen saver if possible - Screen saver in one color or a moving image is recom- mended. Change the [...]

• Avoid using a combination of characters and background color with large difference in luminance. Avoid using Grey colors, which can cause Image retention easily. Avoid: Colors with big difference in luminance (Black & White, Grey) Change the characters color periodically • Use Bright colors with little difference in luminance. - Cycle : C[...]

Note ( Please check CD's User Guide at "OSD Function", some model's will not available ) Apply the Screen Pixel function on Product • Apply the Screen Pixel function - Symptom: Dot with Black Color move up and down. - Select method • Instruction Guide : OSD Menu -> Set Up -> Safety Screen -> Pixel • Time Interval [...]

- Select method • Instruction Guide : OSD Menu -> Set Up -> Safety Screen -> Eraser • Time Interval : 1 ~ 10 hours ( Recommend : 1 ) • Time Period : 10 ~ 50 second ( Recommend : 50 ) Note ( Please check CD's User Guide at "OSD Function", some model's will not available ) Information[...]

Appendix Contact SAMSUNG WORLDWIDE Note If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. North America U.S.A 1-800-SAMSUNG(726-7864) http://www.samsung.com CANADA 1-800-SAMSUNG(726-7864) http://www.samsung.com/ca MEXICO 01-800-SAMSUNG(726-7864) http://www.samsung.com Latin America [...]

Europe GERMANY 01805 - SAMSUNG (726-7864) (€ 0,14/Min) http://www.samsung.com HUNGARY 06-80-SAMSUNG (726-7864) http://www.samsung.com ITALIA 800-SAMSUNG (726-7864) http://www.samsung.com LUXEMBURG 0035 (0)2 261 03 710 http://www.samsung.com/be NETHERLANDS 0900 SAMSUNG (726-7864 € 0,10/Min) http://www.samsung.com/nl NORWAY 815-56 480 http://www.[...]

Asia Pacific TAIWAN 0800-329-999 http://www.samsung.com/tw VIETNAM 1 800 588 889 http://www.samsung.com Middle East & Africa SOUTH AFRICA 0860-SAMSUNG(726-7864) http://www.samsung.com TURKEY 444 77 11 http://www.samsung.com U.A.E 800-SAMSUNG(726-7864) 8000-4726 http://www.samsung.com Terms Dot Pitch The image on a monitor is composed of red, gr[...]

ble network. In order to view cable TV, one must purchase a cable receiver and hook it up to the cable network. CATV "CATV" refers to the broadcasting service offered at hotels, schools and other buildings through their own broadcasting sys- tem, apart from VHF or UHF broadcasting by terrestrial broad- casters. The CATV programs may inclu[...]

In HD, 1080-line, 2x density beaming (1080i) is used. HD provides a five times clearer screen quality than the existing analog method and has a wide 16:9 aspect ratio. • SD (Standard Definition) In SD, 480-line, double beaming (480i) is used. SD provides a screen quality somewhere between HD and the existing an- alog method. It exhibits a two tim[...]

Appendix[...]