Samsung 710T, 910T, 710N, 910N, 510T, 510N, 512N, 515V, 915V, 712N, 912N, 711T, 912T, 913N, 701T инструкция обслуживания

SyncMaster 710T / 910T / 710N / 910N / 510T / 510N / 512N / 515V / 915V / 712N / 912N / 711T / 912T / 913N / 701T[...]

Failure to fol low directions no ted by this symb ol could result in bodi ly harm or damage to equipment. Prohibited Important to read and un derstand at all times Do not disassemble Disconnect the pl ug from the outlet Do not touch Grounding to prev ent an electric sh ock Power When not used fo r extended periods of time, set your computer to DPMS[...]

Do not pull the plug out by the wire nor touch the plug with wet hands. z This may cause an el ectric shock or fir e. Use only a p roperly grounde d plug and r eceptacle. z An improper ground ma y cause electri c shock or equipm ent damage. Do not excessively bend the plug an d wir e nor place heavy objects upon them, which could cause damage. z Th[...]

Set down the monitor carefully. z It could be damaged or broken. Do not place the monitor face down. z The TFT-LCD surface may be damaged. Installing a wall bracke t must be done by a qualified pr ofessional. z Installation by unq ualified personnel m ay result in injur y. z Always us e the mountin g device sp ecified in the owne r's manual. L[...]

Contact a Ser vice Center or Customer Center for interior cleani ng once a year. z Keep the product's interior clean. Dust which has accumulated in the in terior over an extended per io d of time may cause malfunction or a f ire. Other Do not remove cover (or back). No user se rviceable parts inside. z This may cause an el ec tric shock or a f[...]

z This may cause a break down, electric sho ck or a fire due to damage to the cable. Do not cover the vents on the monitor cabinet. z Bad ventilation may cause a bre akdown or fire. Do not place water containers, chem ical products or small metal ob j ects on the monitor. z This may cause ma lfu nction, an elec tric shock or a fire. z If a foreign [...]

To ease eye strain, take at least a five-minute bre ak after every hour of using the monitor . Do not use the monito r where it can be e xposed to strong vibrations. z Exposure to strong v ibratio ns can be a fire hazard and shorten the life of the monitor. When moving the monitor, turn the power switch off and unplug the power cord. Make sure that[...]

Please make sure the following ite ms are inc luded with your monitor. If any items are missing, contact your dealer . Unpacking Option 1 Moniter & Si m p le st a nd Bottom Option 2 Monitor & Piv ot stand Manual U s e r's G ui d e, Mon i tor SyncMaster 510T / 710T / 910T / 711T / 912T / 701T SyncMaster 510T / 701T[...]

Quick Setup Guide Warranty Card Dirver, Natural Color software, MagicTune™ software C D Cable D-Sub Cable Power Cord DVI Cable (op tion) Front 1. Menu button [ ] Opens the OSD menu. Also us ed to exit the OSD menu or return to the previous me nu. 2. MagicBright button [] MagicBright is a new feature prov iding opti mum viewin g en vironment depen[...]

If this is the case, adjust the Brightness and Con t rast by using the OSD menu. 3. Brightness button [ ] When OSD is not on the sc reen, Push the button to adjust brightness. 2,3. Adjust buttons [ ] Adjust items in the menu. 4. Enter button [ ] / Source button Activate a highli ghted menu item. / Push the 'Source', the n Selects the Vide[...]

SyncMaster 710T / 910T / 711T / 912T / 701T(Option) (The con figurat ion at the back of the monitor m ay v ary from produc t to produ ct.) 1. Power port Connect the power cord for your monito r to the power port on th e back of the moni to r. 2. DVI po rt Connect the DVI Cab le to t he DV I Port o n the b ack of your Monit or. 3. D-su b 15-pin port[...]

Please make sure the following ite ms are inc luded with your monitor. If any items are missing, contact your dealer . Unpacking Option 1 Moniter & Si m p le st a nd Bottom Option 2 Monitor & Piv ot stand Manual User's Guide, Monitor SyncMaster 510N / 710N / 910N / 512N / 712N / 912N / 913N / 515V / 915V SyncMaster 510N / 512N / 515V[...]

Quick Setup Guide Warranty Card Dirver, Natural Color software, MagicTune™ software C D Cable D-Sub Cable Power Cord Front 1. Menu button [ ] Opens the OSD menu. Also us ed to exit the OSD menu or return to the previous me nu. 2. MagicBright button [] MagicBright is a new feature prov iding opti mum viewin g en vironment depending on the conte nt[...]

If this is the case, adjust the Brightness and Con t rast by using the OSD menu. 3. Brightness button [ ] When OSD is not on the sc reen, Push the button to adjust brightness. 2,3. Adjust buttons [ ] Adjust items in the menu. 4. Enter button [ ] Activate a highli ghted menu item. 5. Auto button Use this button for auto ad justment direct access. 6.[...]

1. Connect the power cord for your monitor to the power po rt on the back of the monitor. Plug the power cord fo r the mo nitor into a nearby outlet. 2-1. Using the D-sub (Analog) conne c tor on the video card. Connect the signal cabl e to the 15-pin, D-sub connector on the back of your monitor . 2-2. Using the DVI (Digital) conn ector on the video[...]

1. Connect the power cord for your monitor to the power po rt on the back of the monitor. Plug the power cord fo r the mo nitor into a nearby outlet. 2-1. Using the D-sub (Analog) conne c tor on the video card. Connect the signal cabl e to the 15-pin, D-sub connector on the back of your monitor . 2-2. Connected to a Macintosh. Connect the monitor t[...]

M o nitor a n d Bottom Pivot Stand Attaching a base This monitor accepts a 100 mm x 100 mm VESA-compliant mounting interface pad. SyncMaster 510T / 510N / 512N /515V 701T[...]

Simple stand Pivot stand A. Monitor B. Mounting interface pad 1. Turn off your moni tor and unplug its power cord. 2. Lay the LCD monitor face-down on a flat surface with a cushion bene ath it to pro tec t the screen. 3. Re m o ve four screws and th e n re m o ve the Stand from the LCD monitor. 4. Align the Mounting Interface Pad with the holes in [...]

5. Monitor driver installation is co mpleted. This monitor dr iver is under cer tifying MS logo,and this installation don't damage your system.T he certified dr ive r will be posted on Samsung Monitor Homepage h ttp: / /www.samsu n g .com / . Windows XP | Windows 2000 | Wi ndows NT | Linux When prompted by the operating system for the monitor [...]

5. Click " Update Dr iver.. " and select " Install from a list or.. " then click " Next " button. 6. Select " Don't search ,I will.. " then click " Ne xt " and then c lick " Have disk ". 7. Click the " Browse " button then choose A:(D: Driver) and choose your monito r model [...]

This monitor dr iver is under cer tifying MS logo,and this installa tion don't damage your system.The certified driver will be posted on Samsun g Monitor Homepage h ttp: / /www.samsu n g .com/ 9. Click the " Close " button then click " OK " button continually. 10. Monitor driver installation is co mpleted. Microsoft ® Wind[...]

If you ca n see the " Digital Signature Not Found " window then click the " Yes "button. And click the " Fi nish " button the n the " Close " button. Microsoft ® Windows ® NT Operating System 1. Click Start , Settings , Control Panel , and then do uble -click Display icon. 2. In Display Registra tion Inform[...]

How to install the Natural Color sof tware Insert the CD included with the Samsung monitor into the CD-ROM Dr ive. Then, the i nitial screen of the program N a tur al Color will be exe cuted. Click N atural Color on the initial scr een to install the Natural Color s oftware. To install the pr ogram manually, inse rt the CD in cluded with the Samsun[...]

1. Use this button for open the on-scree n m enu and exits from the menu scree n o r closes screen adjus tment menu. 2. These buttons allow you to adjust items in the men u. 3. These buttons allow you to adjust items in the men u. 4. Activate a highli ghted menu item. 5. Press to self-adjust to th e incoming PC si gnal. The values o f fine,coarse a[...]

Menu Description Brightness Adjust Brightne ss. Source Menu Description Source Selects the Video signal while th e OSD is off. Picture Brightness Menu Description Play/Stop Brightness Adjust the Brigh tness. Direct Access Feature : When OSD is not on the scre en, Push the button to adjust brightness. Contras t Adjust the Con trast. Color Menu Descr[...]

OSD Menu Description Play/Stop Language Follow these steps to c hange the language used in the me nu. You can choose one of seven language s. (English, German, Spanish, French, Ital ian, Swedish, Ru ssian) Note :The language chosen affects only the language of the OSD. It has no effe ct on any software running o n the computer. H-Position You can c[...]

1. Use this button for open the on-scree n m enu and exits from the menu scree n o r closes screen adjus tment menu. 2. These buttons allow you to adjust items in the men u. 3. These buttons allow you to adjust items in the men u. 4. Activate a highli ghted menu item. 5. Press to self-adjust to th e incoming PC si gnal. The values o f fine,coarse a[...]

Menu Description Brightness Adjust Brightne ss. Picture Menu Description Play/Stop Brightness Adjust the Brigh tness. Direct Access Feature : When OSD is not on the scre en, Push the button to adjust brightness. Contras t Adjust the Con trast. Color Brightness Menu Description Play/Stop Color T one The tone of the color can be changed and one of fo[...]

OSD Menu Description Play/Stop Language Follow these steps to c hange the language used in the me nu. You can choose one of seven language s. (English, German, Spanish, French, Ital ian, Swedish, Ru ssian) Note :The language chosen affects only the language of the OSD. It has no effe ct on any software running o n the computer. H-Position You can c[...]

Overview | Inst all | OSD Mode | Color Calibration | Uninstall | Troubleshooting Overview What is MagicTune™? Monitor performance can vary due to the graphics card, host computer lighti ng conditions and other environmental factors. In order to get the best image on a monitor requires you to adjust it for your unique setting. Unfortunately, the m[...]

Overview | Install | OSD Mode | Color Calibration | Uninstall | Troubleshooting Install 1. Insert the install ation CD into the CD-ROM drive. 2. Click th e MagicT une™ inst allati on file. 3. Select installation Language, Click "Next". 4. When the InstallShiel d Wizard window appears, click "Next." 5. Select "I agree to t[...]

6. Choose a folder to install the MagicTune program. 7. Click "Install." 8. The "Installation Status" window appears.[...]

9. Click "Finish." 10. When th e insta llation is compl ete, the MagicTu ne 2.5 executable icon appears on your desktop. Double-click the icon to start the program. 11. The following window appears if the installation is successful. Magictune e xecution icon may n ot appear depe nding on specification of computer system or monitor. If tha[...]

12. The following error message indicates that the system is using a video card that is not supported by MagicTune. Installation Problems The installation of MagicTune™ 2.5 can be affected by such factors as the video card, motherboard and the network environment. See "Troubleshooting" if you have troubl e during installation. System Re[...]

Overview | Insta ll | OSD Mode | Color Calibration | Uninstall | Troubleshooting OSD Mode The OSD mode makes the adjustment of settings on all monitors easy. When selected , each tab on top of the control window displays the general descriptions of the sub-menu items for adjustment . When selected, each tab displays a list of menus. For quick adju [...]

Allows the user to adjust the scr een settings to the d esired values. Color Tab Definition Adjusts the "warmth" of the m onitor background or image color. Brightness Contrast Re solution MagicBright n m l k j i n m l k j n m l k j n m l k j Brightness Makes the entire sc re en brighter or darker. The detailed data of the image s in the d[...]

Image Tab Definition Adjusts the Fine , Coarse and Position values. Color Tone Color Contr ol Calibration n m l k j i n m l k j n m l k j Color Tone The tone of the color can be changed. z Warm - Normal - Cool z Custom Color Control Adjusts of th e monitor image colo r. You can change the monitor color t o your desired color. z R- G - B Calibration[...]

Option Tab De finition You can configure MagicTune using the fol lowing options. Image Set up P osition n m l k j i n m l k j Image Setup z Fine : Removes noise such as horizontal stripes. If the noise persists even after Fi ne tuni ng, repeat it after adjusting the frequency (clock speed). z Coarse : Removes noise such as vertical stripes. Coarse [...]

Support Tab Definition Shows the Asset ID and t he versio n number o f the pr ogram, and allows you to use the Help feature. Preferences z Enable task tray m enu . - To access the MagicTune menus, click the icon on the [task tray menu]. The menus are not displayed if the [E nable System Tray] is deselected in [Options] ' [Basic Settings]. z Se[...]

Overview | Insta ll | OSD Mode | Color Calibration | Unins tall | Troubleshooting Color Calibration 1. Color Calibration Color Calibration guides you to get opti mal color condition for your monit or. Proceed follow ing 5st eps for gettin g optim al mon itor co lor cond ition . 1. Control "Brightness control bar" for matching t he bright [...]

Press "Preview" button on the Color Calibration. The above picture will be shown. 1. Press "View Calibrated " button to see th e calibration effect which you adjusted. 2. Press "View Uncalibrated" button to see the original imag e.[...]

Overview | Inst all | OSD Mode | Color Calibration | Uninstall | Troubleshooting Uninstall The MagicTune program can be removed only by us ing the "Add or Remove Programs" option of the Windows Control Panel. Perform the following steps remove MagicTune. 1. Go to [Tusk Tray] ' [Start] ' [Setti ngs ] and se lect [C ontro l Pane l[...]

Overview | Installation | OSD Mode | Color Calibration | Uninsta ll | Troub leshooti ng Troubleshooting z MagicTune may not work in case monitor is replac ed or driver of graphic card is updated while MagicTune is operating. If so , please restart the system. Check when MagicTune does not function pro perly. * MagicTune feature is found only on PC [...]

SyncMaster 510T / 710T / 910T / 711T / 912T / 701T Before calling for servic e, check the info rmation in this section to see if you can remedy any problems yourself. If you do need assistance , please call th e phone number on th e Information section or contact your de al er . Symptom Check List Solutions No images on the screen. I cannot turn on[...]

displayed. If th e display exceeds 85Hz, the display will work properl y but the "Not Optimum Mode","Recommand ed Mode 1280 x 1024 60Hz" message appears for one minute a nd the n disappears. Please change to the recommended mode duri ng this one -minute period. (The message is displ aye d again if the system is rebooted.) There [...]

changing the v ideo card. Has the video card been set properly? Set the video card by referri ng to the video card manual. There is a message that reads "Unrecognized monitor, Plug & Play (VESA DDC) monitor found". Have you install ed the monitor driver? Install the monitor driver accordi n g to the Driver Installation Instructions . [...]

functioni ng proper ly . Self-Test F eature Check 1. Turn off both your computer an d the monitor. 2. Unplug the video cable f rom the back of the computer. 3. Turn on the monitor. If the monitor is functioning prop erly, you will see a box in the illustration below . This box appears during normal opera tion if the video cable becomes di sconnecte[...]

SyncMaster 510N / 710N / 910N / 512N / 712N / 912N / 913N / 515V / 915V Before calling for servic e, check the information in this section to see if you can remedy any problems yourself. If you do need assistance , please call th e phone number on th e Information section or contact your de al er . Symptom Check List Solutions No images on the scre[...]

(The message is displ aye d again if the system is rebooted.) There is no image on the scree n. Is the pow er indicator on the monitor blinkin g at 1 seco nd intervals? The monitor is in PowerSaver mod e. press a key on th e keyboard to activate the monitor and restore the image on the screen. The screen shows strange colors or just black and whit [...]

5. If you have problems in installin g the adapter (video) driver, boot the comput er in Safe Mode, remove the Disp lay Adapter at the " Control Panel → System → De vice Admini strator " and then reboot the computer to reinstall the adapter (video) driver . If problems repeatedly occu r, contact an authorized service center . Q & [...]

Warning Me ssages If there is something wr ong with the input signal , a message appe ars on the screen or the screen goes blank althou gh the power indicator LED is still on . The message may indicate that the monitor is out of scan rang e or tha t you need to check the signal cable. Environmen t The location an d th e position of th e mo nitor ma[...]

General General Model Name SyncMaster 710T / 711T / 701T LCD Panel Size 17" Diagonal Display area 337.92 (H) x 270.336 (V) Pixel Pitch 0.264mm (H) x 0.264mm (V) Type a-si TF T activ e matrix Synchronization Horizonta l 30 ~ 81 kHz Vertical 56 ~ 75 Hz Display Color 16,194,277 Colors Resolutio n Optimu m resoluti on 1280 x 1024@60 Hz Maximum r e[...]

Less than 34W Dimensions (WxDxH)/ Weight (Simple Stand) Dimensions (WxDxH)/ Weight (Pivot Stand) 370.0 x 60.3 x 316.0 mm (Without Stand) 370.0 x 200,0 x 40 4 . 0 mm (with B a sic Stand) / 5.8 kg VESA Mounting Interface 100mm x 100mm (for use with Specia lty(Arm) Mounti ng hardware.) Environmental cons iderations Operating Temperature: 50°F ~ 104°[...]

Preset Timing Modes If the signal transferred fro m the computer is th e sam e as the follo w ing Preset Timing Modes , the screen will be adjusted automatically. However, if the signa l differs, the screen may go blank while the power LED is on. Refer to the video card manual and adjust the scre en as follows. Table 1. Preset Timing Mode s Display[...]

General General Model Name SyncMaster 910T / 912T LCD Panel Size 19" Diagonal Display area 376.32 (H) x 301.056 (V) Pixel Pitch 0.294mm (H) x 0.294mm (V) Type a-si TF T activ e matrix Synchronization Horizonta l 30 ~ 81 kHz Vertical 56 ~ 75 Hz Display Color 16,777,219 Colors Resolutio n Optimu m resoluti on 1280 x 1024@60 Hz Maximum r esoluti [...]

Less than 38W Dimensions (WxDxH)/ Weight (Simple Stand) Dimensions (WxDxH)/ Weight (Pivot Stand) 416.6 x 60.2 x 349.4 mm (Without Stand) 416.6 x 200 . 0 x 4 20 . 6 m m (with B a sic St a n d) / 7. 2 kg VESA Mounting Interface 100mm x 100mm (for use with Specia lty(Arm) Mounti ng hardware.) Environmental cons iderations Operating Temperature: 50°F [...]

Preset Timing Modes If the signal transferred fro m the computer is th e sam e as the follo w ing Preset Timing Modes , the screen will be adjusted automatically. However, if the signa l differs, the screen may go blank while the power LED is on. Refer to the video card manual and adjust the scre en as follows. Table 1. Preset Timing Mode s Display[...]

General General Model Name SyncMaster 710N / 712N LCD Panel Size 17" Diagonal Display area 337.92 (H) x 270.336 (V) Pixel Pitch 0.264mm (H) x 0.264mm (V) Type a-si TF T activ e matrix Synchronization Horizonta l 30 ~ 81 kHz Vertical 56 ~ 75 Hz Display Color 16,194,277 Colors Resolutio n Optimu m resoluti on 1280 x 1024@60 Hz Maximum r esoluti [...]

Dimensions (WxDxH)/ Weight (Simple Stand) 370.0 x 60.3 x 316.0 mm (Without Stand) 370.0 x 1 9 5. 4 x 38 6 . 5 mm (with B a sic Stand) / 4. 4 kg Dimensions (WxDxH)/ Weight (Pivot Stand) 370.0 x 60.3 x 316.0 mm (Without Stand) 370.0 x 200.0 x 40 4 . 0 mm (with B a sic Stand) / 5 . 8 kg VESA Mounting Interface 100mm x 100mm (for use with Specia lty(Ar[...]

If the signal transferred fro m the computer is th e sam e as the follo w ing Preset Timing Modes , the screen will be adjusted automatically. However, if the signa l differs, the screen may go blank while the power LED is on. Refer to the video card manual and adjust the scre en as follows. Table 1. Preset Timing Mode s Display Mode Horizontal Fre[...]

General General Model Name SyncMaster 910N / 912N / 913N / 915V LCD Panel Size 19" Diagonal Display area 376.32 (H) x 301.056 (V) Pixel Pitch 0.294mm (H) x 0.294mm (V) Type a-si TF T activ e matrix Synchronization Horizonta l 30 ~ 81 kHz Vertical 56 ~ 75 Hz Display Color Resolutio n Optimu m resoluti on 1280 x 1024@60 Hz Maximum r esoluti on 1[...]

Dimensions (WxDxH)/ Weight (Simple Stand) 416.6 x 60.2 x 349.4 mm (Without Stand) 416.6 x 21 5. 2 x 424.6 m m (with B a sic St a n d) / 5. 6 kg Dimensions (WxDxH)/ Weight (Pivot Stand) 416.6 x 60.2 x 349.4 mm (Without Stand) 416.6 x 200.0 x 42 0 . 6 m m (with B a sic St a n d) / 7. 2 kg VESA Mounting Interface 100mm x 100mm (for use with Specia lty[...]

If the signal transferred fro m the computer is th e sam e as the follo w ing Preset Timing Modes , the screen will be adjusted automatically. However, if the signa l differs, the screen may go blank while the power LED is on. Refer to the video card manual and adjust the scre en as follows. Table 1. Preset Timing Mode s Display Mode Horizontal Fre[...]

General General Model Name SyncMaster 510T LCD Panel Size 15" Diagonal Display area 304.1 (H) x 228.1 (V) Pixel Pitch 0.297 (H) x 0.297 (V) Type a-si TF T activ e matrix Synchronization Horizonta l 30 ~ 61 kHz Vertical 56 ~ 75 Hz Display Color 16,194,277 Colors Resolutio n Optimu m resoluti on 1024 x 768@60 Hz Maximum r esoluti on 1024 x 768@7[...]

Less than 25W Dimensions (WxDxH)/ Weight 338.0 X 56.3 X 272.0 mm (Without Stand) 338.0 X 1 9 5. 4 X 3 42 . 5 m m (wi t h Basic Stand) / 3. 0 kg VESA Mounting Interface 75mm x 75mm (for use with Specialty(Arm) Mounting hardwar e.) Environmental cons iderations Operating Temperature: 50°F ~ 104°F(10°C ~ 40°C) Humidity: 10% ~ 80%, non-condensing S[...]

Table 1. Preset Timing Mode s Display Mode Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (H/V) IBM, 640 x 350 31. 469 70.086 25.175 +/- IBM, 640 x 480 31.469 59.940 25.175 -/- IBM, 720 x 400 31. 469 70.087 28.322 -/+ MAC, 640 x 480 35.000 66.667 30.240 -/- MAC, 832 x 624 49.726 74.551 57.284 -/- VESA, 640 x 480 [...]

General General Model Name SyncMaster 510N / 512N LCD Panel Size 15" Diagonal Display area 304.1 (H) x 228.1 (V) Pixel Pitch 0.297 (H) x 0.297 (V) Type a-si TF T activ e matrix Synchronization Horizonta l 30 ~ 61 kHz Vertical 56 ~ 75 Hz Display Color 16,194,277 Colors Resolutio n Optimu m resoluti on 1024 x 768@60 Hz Maximum r esoluti on 1024 [...]

Dimensions (WxDxH)/ Weight 338.0 X 56.3 X 272.0 mm (Without Stand) 338.0 X 1 9 5. 4 X 3 42 . 5 m m (wi t h Basic Stand) / 3. 0 kg VESA Mounting Interface 75mm x 75mm (for use with Specialty(Arm) Mounting hardwar e.) Environmental cons iderations Operating Temperature: 50°F ~ 104°F(10°C ~ 40°C) Humidity: 10% ~ 80%, non-condensing Storage Tempera[...]

Table 1. Preset Timing Mode s Display Mode Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (H/V) IBM, 640 x 350 31. 469 70.086 25.175 +/- IBM, 640 x 480 31.469 59.940 25.175 -/- IBM, 720 x 400 31. 469 70.087 28.322 -/+ MAC, 640 x 480 35.000 66.667 30.240 -/- MAC, 832 x 624 49.726 74.551 57.284 -/- VESA, 640 x 480 [...]

Service AUSTRALIA : Samsung Electron ics Australia Pt y Ltd. Customer Respons e Centre 7 Parkview Drive, Ho mebush Bay NSW 2127 Tel : 1300 362 603 http://www.samsung.com.au/ BRAZIL : Samsung El etronica da Amazonia Ltda. R. Prof. Manoelito de Ornellas, 303, Terro B Chacara Sto. Antonio, CEP : 04719-040 Sao Paulo, SP SAC : 0800 124 421 http://www.sa[...]

Ciencies, 55-65 (Poligono Pedrosa) 08908 Hospitalet de Llobregat (Barcelona) Tel. : (93) 261 67 00 Fax. : (93) 261 67 50 http://samsung.es/ FRANCE : SAMSUNG ELECTR ONICS FRANC E Service Paris Nord 2 66 rue des Vanesses BP 50116 Villepinte 95950 Roissy CDG Cedex Tel : 08 25 08 65 65 Fax : 01 48 63 06 38 http://www.samsungservices.co m/ GERMANY : TEL[...]

Panama Tel. : (507) 210-1122, 210-1133 Tel : 800-3278(FAST) http://www.samsung-latin.com/ PERU : Servicio In tegral Samsung A v.Ar g entina 1790 Lima1. Peru Tel: 51-1-336-8686 Fax: 51-1-336-8551 http://www.samsungperu.com/ PORTUGAL : SAMSUNG ELECTR ONICA PORTUG UESA S.A. Rua Mário Dioniso, N o 2 - 1º Drt. 2795-140 LINDA-A-VELHA Tel. 214 148 114/1[...]

Fax. : (01952) 292 033 http://samsung service.co.uk/ U.S.A. : Samsung Electron ics America Service Divis ion 400 Valley Road, Suite 201 Mount Arlington, NJ 07856 1-800-SAMSUNG (1-800-726-7864) http://samsungus a.com/moni tor/ Terms Dot Pitch The image on a moni tor is composed of re d, green and blue dots. Th e closer the dots, th e h igher the res[...]

1ppm (one millionth) above is used for this p r o d uct. But the pix e ls of RE D , GRE E N, BLUE and WHI T E color seem to be bright sometimes or some of black pixels could be seen. This is not from bad quality and you can use it wi thout uneasin ess. { For example, the nu m b er of TFT LCD sub pixels th a t is contained in this product are 2,359,[...]

FCC Information | IC Complia nce Noti ce | MPR II C ompliance European Not ice (Europ e only) | PCT Not ice | VCCI | TCO'95-Ec ological require ments for pe rsonal computers (TCO'95 appli ed model only) TCO'99-Ec ological require ments for pe rsonal computers (TCO'99 appli ed model only) TCO'03-Ec ological require ments for[...]

MPR II Compliance This monitor complies with SWEDAC(MPR II) recommendation s for reduced electric and magnetic fields. PCT Notice VCCI This is a Class B product based on th e standard of the Voluntary Control Counci l for Interference by Informati on Technology Equipment (VCCI). If this is used near a rad io or television receiver in a domestic env[...]

There are also other charac teristics of a monitor, such as energy consumpti on levels, that a re important from both the working and na tural environment viewpoints. Sin ce all types of conventional electricity gene ration have a ne gati ve effect on the environment (acidic and climate-infl uencing emissions, radioactive wa ste, etc.) it is vital [...]

electronics comp onents concerned with th e display unit. CFCs (freons) CFCs (freons) are sometimes used fo r washing printed circuit boards an d in the manufacturing of expanded foam for packagin g. CFCs break down ozone and thereb y damage the ozone layer in the stratosphere, ca using increase d reception on Eart h of ultravi olet light with cons[...]

via the Internet, using the address: http://www.tco-info.com/ Environmen tal requirem ents Flame retardants Flame retar dants are present i n printed circuit boards, cables , wires, casings an d housings. Their purpose is to prevent, or at least to de lay th e spread of fi re . Up to 30% of the plastic in a computer casing can consist of flame reta[...]

Energy z Energy-saving mode after a certain time ?ben eficial both for the user and the en vironment z Electrical safety Emissions z Electromagnetic fields z Noise emissions Ecology z The product must be prepared for recycling an d the manufacturer must have a certifie d environmental management system such as EMAS or ISO 14 000 z Restrictions on o[...]

This equipment ha s been tested and found to comply with the limits for medical d evices to the IEC 601-1-2:1994. Th ese limits are d esigned to pro vide reasonabl e protection against harmful interference in a typical medical insta llation. This equipment genera tes, uses and can radiate radio frequency ene rgy and, if not installed an d use d in [...]

PRODUCT INFORMATION (I mage Retention Free) LCD Monitors and TVs may have image retentio n when switching from one imag e to another especially after displaying a statio nary image for a long time. This guide is to demonstrate corre ct usage of LC D products in order to protect them from Image retention. What is Ima g e retention ? During normal op[...]

The best way to prote ct your monitor from Image retentio n is to set your PC or S y stem to o p erate a Screen Saver p ro g ram when y ou are not usin g it. Image retention may not o ccur when a LCD panel is opera ted under normal conditio ns. Normal conditions are defined as continuously changi ng video patterns. Whe n the LCD panel is operated f[...]