Samsung DIGIMAX I5 инструкция обслуживания

ENGLISH User ’ s Manual Thank you for buying a Samsung Camera. This manual will guide you through using the camera, including capturing images, downloading images and using the application software. Please read this manual carefully before using your new camera.[...]

《 2 》 Instructions ■ Use this camera in the following order Insert the USB cable Set up the camera driver Before connecting the camera to a PC, via the USB cable, you will need to set up the camera driver. Install the camera driver that is contained in Application software CD-ROM. (p.117) Take a picture. (p.24) Insert the supplied USB cable i[...]

《 3 》 Contents READY ● Getting to know your camera 5 ● Danger 6 ● Warning 6 ● Caution 7 ● An FCC warning 7 ● System chart 8 ● Identification of features 10 ■ Front & Top 10 ■ Back & Bottom 10 ■ Bottom/ 5-function button 11 ■ Cradle 11 ■ Self-timer lamp 12 ■ Camera Status Lamp 12 ■ Mode icon 12 ● Connecting [...]

《 4 》 Contents ■ Playing back a movie clip 63 ■ How to capture the movie clip 63 ■ On camera movie trimming 64 ■ Playing back a recorded voice 65 ● LCD monitor indicator 66 ● Using the camera buttons to adjust the camera 67 ■ Play mode button 67 ● Thumbnail/ Enlargement button 68 ● Voice memo/ Up button 69 ● Play & Pause[...]

《 5 》 Getting to know your camera Thank you for buying a Samsung Digital Camera. ● Prior to using this camera, please read the user manual thoroughly. ● When you require After Sales service, please bring the camera and the cause of the camera malfunction (such as battery, Memory card etc.) to the A/S centre. ● Please check that the camera[...]

《 6 》 Danger ■ Do not attempt to modify this camera in any way. This may result in fire, injury, electric shock or severe damage to you or your camera. Internal inspection, maintenance and repairs should be carried out by your dealer or Samsung Camera Service centre. ■ Please do not use this product in close proximity to flammable or explos[...]

《 7 》 Caution ■ Leaking, overheating, or burst battery could result in fire or injury. • Use battery with the correct specification for the camera. • Do not short circuit, heat or dispose of battery in fire. • Do not insert the battery with the reverse polarities. ■ Remove the battery when not planning to use the camera for a long per[...]

《 8 》 System chart Please check that you have the correct contents before using this product. The contents can vary depending on the sales region. To buy the optional equipment, contact your nearest Samsung dealer or Samsung service centre. Software CD (see p.115, 116) Camera strap User manual, Product warranty Pouch SD memory card/MMC (see p.1[...]

《 9 》 System chart PictBridge compatible printer(see p.89) Computer External monitor Yellow colour - Video White colour - Voice (see p.101) For Windows • PC with processor better than MMX Pentium 233MHz (XP : Pentium II 300MHz) • Windows 98/98SE/2000/ME/XP • Minimum 32MB RAM (XP : 128MB) • 140MB of available hard-disk space • USB port[...]

《 10 》 Identification of features Front & T op Back & Bottom LCD monitor M(Mode/Album) button Play mode button Zoom T button (Digital zoom) 5 function button +/-, DELETE button DC/USB/AV connection terminal Cradle connector Camera status lamp Zoom W button (Thumbnail) Strap eyelet ※ Take care not to press the lens, lens cover and came[...]

《 11 》 Identification of features ■ You can recharge your rechargeable battery, transfer a captured image to print, and download images with the cradle. (Refer to page 14, 89 and 127) FLASH/ LEFT button MENU/ OK button Macro / DOWN button Play & Pause button SELF-TIMER/ RIGHT button Voice memo/ Voice recording/ UP button Bottom / 5-functi[...]

《 12 》 Identification of features ■ Mode icon : Refer to page 40, 41 for more information about the camera mode setting. MODE MOVIE CLIP VOICE RECORDING AUTO MANUAL SF PLAY Icon NIGHT PORTRAIT CHILDREN LANDSCAPE CLOSE UP TEXT Icon MODE SUNSET DAWN BACKLIGHT FIREWORKS BEACH&SNOW - Icon - MODE SCENE ■ Self-timer lamp Icon Status Descripti[...]

《 13 》 Connecting to a Power Source Important information about battery usage ● When the camera is not used, turn off the camera power. ● Please remove the battery if the camera will not be used for long periods. Battery can lose power over time and are prone to leaking if kept inside the camera. ● Low temperatures (below 0 ˚ C) can affe[...]

《 14 》 Connecting to a Power Source If you have access to a mains supply, using an SAC-41 allows the camera to be used for long periods of time. Plug the SAC-41 into the DC connection terminal on the camera or cradle. Before turning on the camera power with an SAC-41, insert the rechargeable battery that was charged for over 10 minutes with tur[...]

《 15 》 Connecting to a Power Source ※ If you connect the SAC-41 to camera without inserting the rechargeable battery, the charging LED will brink or be off. In this case, insert the battery and connect the SAC-41 again. ■ Important information about battery (SLB-0737) charging with the SAC-41 ● If the charging LED of the SAC-41 does not t[...]

《 16 》 Connecting to a Power Source ■ Charging LED of the SAC-41 Status Using the cradle Direct to the camera Being Charged Red LED is on Red LED is on Charging is complete Green LED is on Green LED is on Charging error Red LED is off or blinking Red LED is off or blinking ● If there is a charging error, please check all the power connectio[...]

《 17 》 Connecting to a Power Source ■ Charging LED of the SBC-L5 Charging LED Red LED is on Red LED is blinking Green LED is on Status Being charged Charging error Charging is complete ■ How to charge the rechargeable battery (SLB-0737) with the SBC-L5. 3. Place the (-) and (+) terminals of the battery in the correct position. The red charg[...]

《 18 》 Connecting to a Power Source Using the battery : If the camera does not turn on after you have inserted battery, please check whether the battery are inserted with the correct polarity(+/-). 2. Insert the battery taking note of the polarity (+ / -). 3. To close the battery chamber cover, push it until it clicks. Removing the battery 1. T[...]

《 19 》 Instructions on how to use the memory card ● Be sure to format the memory card (see p.97) if you are using a newly purchased memory for the first time, if it contains data that the camera cannot recognise, or if it contains images captured with a different camera. ● Turn off the camera power whenever the memory card is being inserted[...]

《 20 》 Instructions on how to use the memory card ● Don't remove the memory card when the camera status lamp is blinking as this may cause damage to data in the memory card. INFORMA TION [ SD (Secure Digital) memory card ] Write protect switch Label Card pins ■ The camera can use SD Memory Cards and MMC (Multi Media Cards). Please cons[...]

《 21 》 Inserting the memory card 3. To close, push the battery chamber cover until you hear a click. If the memory card does not slide in smoothly, do not attempt to insert it by force. Check the direction of insertion, and then insert it correctly. Do not insert the memory card the wrong way round. Doing so may damage the memory card slot. 1. [...]

《 22 》 When Using the Camera for the First T ime ■ Charge the rechargeable battery fully before using the camera for the first time. ■ When the camera is turned on for the first time, a menu will be displayed to set date, time and language in the LCD monitor. This menu will not be displayed after setting up the date, time and language. Set [...]

《 23 》 LCD monitor indicator ■ The LCD monitor displays information about the shooting functions and selections. [Image & Full Status] No. Description Icons Page 2 Battery p.18 3 Continuous shot p.53 4 Flash p.37 5 Self-timer p.39 6 Macro p.35 7 Metering p.53 8 Card inserted indicator - 9 Auto focus frame - 10 Camera shake warning p.30 11[...]

《 24 》 LCD monitor indicator Changing the recording mode ■ Selecting the [Mode] menu 1. Insert the battery (p.18). 2. Insert the memory card (p.21). As this camera has a 50MB internal memory, you do not need to insert the memory card. If the memory card is not inserted, an image will be stored in the internal memory. If the memory card is ins[...]

《 25 》 Changing the recording mode ● Changing the recording mode : If the [Still & Movie] menu was selected Steps from 1-4 are the same as those for selecting the [Mode] menu. 5. A recording mode used just before will display. 6. Press the M (Mode) button located on the back of the camera and the recording mode will change to the movie cl[...]

《 26 》 Starting the recording mode ■ How to use the Auto mode Use this for shooting basic still images. 1. Select the [Full] sub menu on the [Mode] menu (p.24). 2. Select the Auto mode by pressing the M (Mode) button (p.25). 3. Point the camera towards the subject and compose the image by using the LCD monitor. 4. Press the shutter button to [...]

《 27 》 Starting the recording mode ■ How to use the Manual mode Selecting the automatic mode will configure the camera with optimal settings. You can still manually configure all functions except the aperture value and shutter speed. 1. Select the [Full] sub menu on the [Mode] menu (p.24). 2. Select the Manual mode by pressing the M (Mode) bu[...]

《 28 》 Starting the recording mode ■ How to use the Scene modes Use the menu to easily configure optimal settings for a variety of shooting situations. 1. Select the [Full] sub menu on the [Mode] menu (p.24). 2. Select the Scene mode by pressing the M (Mode) button (p.25). 3. Point the camera towards the subject and compose the image by using[...]

《 29 》 Starting the recording mode ● A distance of 40cm between you and the camera (microphone) is the best distance to record sound. INFORMA TION ■ How to use the VOICE RECORDING mode A voice recording can be recorded for as long as the available recording time of the memory capacity allows. (Max: 1 hour) 1. In any mode with the exception [...]

《 30 》 Things to W atch Out for When T aking Pictures ■ Pressing the shutter button down half way Lightly press the shutter button to confirm focus and flash battery charge. Press the shutter button all way down to take the picture. ■ The available recording time may vary depending on shooting conditions and camera settings. ■ When the Fl[...]

《 31 》 Using the camera buttons to adjust the camera ■ The recording mode function can be set up by using the camera buttons. POWER button SHUTTER button ● If the menu is not displayed, this button works as the OPTICAL ZOOM or DIGITAL ZOOM button. ● Used for turning the camera’s power on / off. ● If there is no operation during the sp[...]

《 32 》 ZOOM W/ T button ■ This camera has a 3X optical zoom and a 5X digital zoom function. Using both will offer a total zoom ratio of 15X. ● TELE Zoom Optical zoom TELE : Pressing the ZOOM T button. This will zoom into the subject i.e. the subject will appear nearer. Digital zoom TELE : When the maximum (3X) optical zoom is selected, pres[...]

《 33 》 ZOOM W/ T button ● Images taken using the digital zoom may take a little longer for the camera to process. Allow time for this to take place. ● The digital zoom cannot be used in movie clip shots. ● If the Zoom buttons are being pressed during the Movie clip shots, the voice will not recorded. ● You may notice a decrease in image[...]

《 34 》 Vo ice recording( ) / V oice memo( ) / UP button ● A distance of 40cm between you and the camera (microphone) is the best distance to record sound. INFORMA TION ■ While the menu is showing, press the UP button to move up the submenu cursor. When the menu is not displayed on the LCD monitor, the UP button operates as the voice recordi[...]

Mode Auto ( ) Focus Type Auto macro ( ) Super macro ( ) Macro ( ) Normal 《 35 》 Macro( ) / Down button ■ While the menu is showing, press the DOWN button to move from the main menu to a submenu, or to move down the submenu cursor. When the menu is not showing, you can use the MACRO/ DOWN button to take macro pictures. The distance ranges are [...]

《 36 》 Macro( ) / Down button (Focusing) ■ Available focusing method, by recording mode ( O: Selectable , X: Not selectable, ∞ : Infinity focus range) Focus lock ■ To focus on the subject positioned outside of the centre, use the focus lock function. ● Using the Focus Lock 1. Ensure the subject in the centre of the autofocus frame. 2. P[...]

《 37 》 Flash ( ) / Left button [Selecting the Auto flash] ● Flash range (Unit : m) ■ When the menu is displayed on the LCD monitor, pressing the LEFT button makes the cursor shift to the left tab. ■ When the menu is not displayed on the LCD monitor, the LEFT button operates as the FLASH ( ) button. ● Selecting the flash mode 1. Press th[...]

《 38 》 Flash ( ) / Left button Menu tab Flash mode Description ● Flash mode indicator If the subject or background is dark, the camera flash will operate automatically. Auto flash Auto & Red eye reduction Fill in flash Slow synchro Flash off If a subject or background is dark, the camera flash will work automatically and will reduce the r[...]

《 39 》 Self-timer ( ) / Right button ■ When the menu is displayed on the LCD monitor, pressing the Right button makes the cursor shift to the right tab. The right button can also be used to move to a sub menu to select a different setting. When the menu is not displayed on the LCD monitor, the RIGHT button operates as the Self-timer. This fun[...]

《 40 》 MENU / OK button ■ MENU button - When you press the MENU button, a menu related to each camera mode will be displayed on the LCD monitor. Pressing it again will return the LCD to the initial display. - A menu option can be displayed when the following are selected : MOVIE CLIP and STILL IMAGE mode. There is no menu available when the V[...]

Portrait Set : OK/M Manual Set : OK/M 《 41 》 M (Mode) button ● How to use the mode button : In case of [Full] sub menu and Auto mode ※ Press the Mode button and the mode selection menu will disappear. Pressing the Up button Pressing the Right button Pressing the Left/Right button Pressing the Left button [Auto mode] [Manual mode] [Mode sele[...]

《 42 》 SF button ■ Pressing the SF button selects the SF(Safety Flash) mode In poor indoor light conditions, Safety Flash will help you get a good image without the use of a flash. As children are sensitive of using flash, this is suitable function for taking children. ● Things to watch out for using the SF mode 1. The SF range is 2m(WIDE) [...]

《 43 》 +/- button ■ You can use the +/- button to adjust the values for the RGB, ISO, white balance, exposure compensation and Long Time shutter speed. ■ When the SF is selected, ISO value is fixed as AUTO and Exposure value is fixed as 0.0EV. ■ RGB : Allows the user to adjust the R (Red), G (Green), and B (Blue) values of the images to b[...]

《 44 》 +/- button ● Selecting an ISO Sensitivity 1. Press the +/- button, and then use the UP and DOWN buttons to select the ISO icon( ). The ISO menu bar will appear as shown. 2. Use the LEFT and RIGHT buttons to select the desired ISO sensitivity value. - AUTO : The camera's sensitivity is automatically changed by variables such as lig[...]

《 45 》 +/- button ● Using the Custom White Balance White balance settings may vary slightly depending on the shooting environment. You can select the most appropriate white balance setting for a given shooting environment by setting up the custom white balance. 1. Select the CUSTOM ( ) menu of the White Balance. 2. Place a sheet of white pape[...]

《 46 》 +/- button ■ Long Time shutter : This camera automatically adjusts the shutter speed and aperture values to the shooting environment. However, in NIGHT SCENE mode, you can set the shutter speed and aperture values to your preference. ● Adjusting the shutter speed and aperture values 1. Select the [Night] scene mode. (M button → [Sc[...]

《 47 》 Using the LCD monitor to adjust the camera settings ■ You can use the menu on the LCD monitor to set up recording functions. In any mode with the exception of VOICE RECORDING mode, pressing the MENU button displays the menu on the LCD monitor. ■ The following functions are available, depending on the mode you have selected. The items[...]

《 48 》 Using the LCD monitor to adjust the camera settings ※ Menus are subject to change without prior notice. Menu tab Main menu Sub menu Camera working mode Page Frame Rate 30fps 15fps p.52 Metering Multi Spot p.53 Shooting Single Continuous p.53 Soft Normal Vivid - Full OSD Basic OSD Save Mode - Normal Red B&W Green Sepia Blue Negative[...]

《 49 》 How to use the menu 3. Use the UP and DOWN buttons to select a sub menu. 4. Select a sub menu, and then the value you set will be saved. Press the MENU button and the menu will disappear. ■ You can select the desired working mode by the M(mode) button located on the back of the camera and [Mode] menu. Auto, manual, movie clip, scene (n[...]

《 50 》 Mode Set ■ You can select the desired recording mode. [Auto] : For shooting basic still image [Manual] : You can still manually configure all functions except the aperture value and shutter speed. [Movie] : For taking a movie clip [Night] : Use this for shooting still images at night or in other dark conditions. [Portrait] : To take a [...]

《 51 》 Size ■ You can select the image size appropriate for your application. Icon 5M 4M 3M 2M 1M VGA 640 320 160 Size 2592X1944 2272X1704 2048X1536 1600X1200 1024X768 640X480 640X480 320X240 160X128 STILL IMAGE mode Mode MOVIE CLIP mode ● The higher the resolution, the lower the number of available shots will be because high resolution ima[...]

《 52 》 Quality / Frame rate ■ You can select the compression ratio appropriate for your application of the captured images. The higher the compression ratio, the lower the picture quality. Mode Icon Sub menu S. Fine Fine Normal 30FPS 15FPS File Format jpeg jpeg jpeg avi avi STILL IMAGE mode MOVIE CLIP mode ● S. Fine is the highest quality a[...]

《 53 》 Metering ■ Select the number of pictures in continuous shooting. [Single] : Take one picture only [Continuous] : Images will be taken continuously until the shutter button is released. The shooting capacity depends on the memory. ※ High resolution and picture quality increases file saving time, which increases stand-by time. ※ If t[...]

《 54 》 Sharpness OSD(On Screen Display) information ■ You can adjust the sharpness of the picture you want to take. You cannot check the sharpness effect on the LCD monitor before you take a picture, because this function is applied only when the captured image is stored on the memory. Sub menu Icon Description The edges of the image are soft[...]

《 55 》 Effect ■ By using the camera’s digital processor, it is possible to add special effects to your images. [Normal] : No effect is added to the image. [B & W] : Captured images will be stored in black and white. [Sepia] : Captured images will be stored in a sepia tone (a gradient of yellowish brown colours). [Red] : Captured images [...]

《 56 》 Special Effect ■ You can make the subject stand out from its surroundings. The subject will be sharp and in focus while making the rest out of focus. 1. Select the MANUAL mode, and press the menu button. 2. Press the LEFT/ RIGHT button and select the [Special Effect] menu tab. 3. Select the [HighLight] menu by pressing the UP/ DOWN but[...]

《 57 》 Special Effect : Preset focus frames ● Moving and changing the focus frame You can change the focus frame after selecting a Range menu. 1. Point the camera towards the subject and compose the image by using the LCD monitor. 2. Press the +/- button. 3. The colour of focus frame turns white. Press the Up/Down/Left/Right button to moves t[...]

《 58 》 Special Effect : Composite shooting ■ You can combine 2 ~ 4 different shots in a still image. ※ You can use the flash button, self-timer button, macro button, voice memo button and the Zoom W/T button during the composite shooting. ※ If you press the camera buttons (SF button, Play mode button and M button) during the composite sho[...]

《 59 》 Special Effect : Composite shooting ● Changing a part of composite shot before taking the last shot Before taking the last composite shot, you can change a part of composite shot. 1. During the composite shots, press the +/- button. 2. A previous image will be deleted and new frame will display. If there is an image taken before, press[...]

《 60 》 Special Effect : Photo Frame ■ You can add 9 types of frame-like borders to a still image you want to capture. ■ Date & Time information will not be printed on the stored image taken with [Photo Frame] menu. 1. Select the MANUAL mode, and press the menu button. 2. Press the LEFT/ RIGHT button and select the [Special Effect] menu [...]

《 61 》 Movie Clip frame stabiliser ■ This function helps stabilize images captured during movie recording. You can select this menu only in the MOVIE CLIP mode. If the memory card is not inserted, this function will not operate. ● How to use this function 1. Select the MOVIE CLIP mode by pressing the M (Mode) button and press the menu butto[...]

《 62 》 Starting play mode ■ Turn the camera on and select Play mode by pressing the play mode button ( ). The camera can now play back the images stored in the memory. ■ You can set up the PLAY mode function by using the camera buttons and LCD monitor. ■ If the memory card is inserted in the camera, all the camera functions apply only to [...]

《 63 》 Starting play mode ● Playing back a movie clip Steps from 1-2 are the same as those to play back a still image. 3. Select the recorded movie clip that you want to play back by using the LEFT/RIGHT button. If you select a movie clip, the movie clip indicator ( ) will be displayed on the LCD monitor. 4. Press the play & pause button [...]

《 64 》 Starting play mode ■ On camera movie trimming : You can extract desired frames of movie clip during the movie clip play back. ● If the running time is under 10 seconds, the movie clip can’t be trimmed. 1. Select a desired movie clip in the play mode. 2. Play back the movie clip by pressing the Play & Pause button. 3. Press the [...]

《 65 》 Starting play mode ● Playing back a recorded voice Steps from 1-2 are the same as those to play back a still image. 3. Select the recorded voice that you want to play back by using the LEFT/RIGHT button. If you select a recorded voice file, the voice indicator ( ) will be displayed on the LCD monitor. 4. Press the play & pause butt[...]

《 66 》 LCD monitor indicator ■ The LCD monitor displays shooting information about the displayed image. ⑦ ② ① ③ ④ ⑤ ⑥ Size : 2592X1944 Size Av : F3.5 Aperture value Tv : 1/60 Shutter speed ISO : 100 ISO sensitivity Flash : Off Whether or not the flash is used Date : 2005/05/01 Recording date No. Description Icon Page 1 Play mode[...]

《 67 》 Using the camera buttons to adjust the camera ■ In Play mode, you can use the buttons on the camera to conveniently set up the Play mode functions. ■ If you have turned on the camera by pressing the POWER button, you can press the PLAY MODE button once to switch to Play mode and press it (Under 1 Sec.) again to switch to Recording mo[...]

《 68 》 Thumbnail( ) / Enlargement( ) button ● Image enlargement 1. Select an image that you want to enlarge and press the enlargement button. 2. Different parts of the image can be viewed by pressing the 5 function button. 3. Pressing the thumbnail button will zoom back to the original full sized image. - You can tell whether the image displa[...]

《 69 》 Thumbnail( ) / Enlargement( ) button ● The maximum enlargement rate in proportion to the image size. ● Trimming : You can extract part of the image that you want and save it separately. 1. Select an image that you want to enlarge and press the enlargement button. 2. Different parts of the image can be viewed by pressing the 5 functio[...]

《 70 》 V oice ( ) memo / Up button 3. Press the shutter button to start recording and voice will be recorded to the still image for 10 seconds. While the voice is recording, the recording status window will be displayed as shown alongside. 4. The recording can be stopped by pressing the shutter button again. 5. The ( ) icon will be displayed on[...]

《 71 》 Delete ( ) button ■ This deletes images stored on the memory card. ● Before deleting images from the camera, you should protect or download images to your computer that you wish to keep. INFORMA TION ● Deleting Images in Thumbnail Display Mode 1. Use the UP, DOWN, LEFT, and RIGHT buttons to select the image you want to delete, and [...]

《 72 》 Left / Right / Menu / OK button ■ LEFT / RIGHT/ MENU/ OK buttons activate the following. - LEFT button : While the menu is showing, press the LEFT button to select the menu tab to the left of the cursor. - RIGHT button : While the menu is showing, press the RIGHT button to select the menu tab to the right of the cursor, or to move an s[...]

《 73 》 Album button Select Slide Add Remove ■ You can organise the captured still images into albums by using the Album button. ■ This camera has 8 albums and each album can take up to 100 images. ■ The album menu loading time depends on the memory card type. ● Inserting still images into the album 1. Select an album. 2. Select the [Add[...]

Select:T Set:OK Select Slide Add Remove Select:T Set:OK Select Slide Add Remove Set:OK 《 74 》 Album button Select All Pics 3. Select the still images you wish to add by pressing the Up/Down/Left/Right buttons and press the Zoom T button. marks are displayed on the selected images. ※ To cancel the selection, press the Zoom T button again. 4. P[...]

《 75 》 Album button ● If an image is deleted from the memory, the image doesn’t display on an album. ● An image can’t be added twice into the same album. ● An image can be added into the different albums. INFORMA TION ● Playing back the albums ◎ Playing back all of the albums 1. Select [All] menu and press the OK button. All of th[...]

《 76 》 Setting up the play back function using the LCD monitor Menu tab Main menu Sub menu Secondary menu Page Start - Interval 1, 3, 5, 10sec Slide Repeat Off / On p.79 Cancel Effect 1 ~ 4, Random Select All Pics Select - All Pics - 2272X1704 - 2048X1536 - 1600X1200 - 1024X768 - 640X480 - User Image - B&W Red Effect Sepia Green p.84 Negati[...]

《 77 》 Setting up the play back function using the LCD monitor Menu tab Main menu Sub menu Secondary menu Page One Pic - All Pics - No - Yes - Auto Postcard Card 4X6 L 2L Letter A4 A3 p.91 Auto Full 1 2 4 8 9 16 Auto Set Custom Set Images Layout Size Menu tab Main menu Sub menu Secondary menu Page Standard Select/ All Pics/ Cancel DPOF Index No[...]

《 78 》 Setting up the play back function using the LCD monitor Menu tab Main menu Sub menu Secondary menu Page Auto Plain Photo Fastphoto Auto Draft Normal Fine Auto Date Off On Auto File Name Off On Standard - Index - No - Yes - No - Yes - Print Custom Set p.92 p.92 p.93 p.91 DPOF Print Reset ※ Menus are subject to change without prior notic[...]

《 79 》 Starting the slide show ● The loading time depends on the image size and quality. ● While the slide show is playing, only the first frame of a MOVIE file is displayed. ● While the slide show is playing, the voice recording file will not display. INFORMA TION ● Start the slide show : The slide show can start only in the [Start] me[...]

《 80 》 Starting the slide show ● Configure slide show effects: Unique screen effects can be used for the slide show. 1. Select the [Effect] sub menu by pressing the UP/ DOWN button and press the RIGHT button. 2. Use the Up/Down Button to select the type of effect. [Cancel] : Normal display. [Effect 1] : Image is displayed slowly. [Effect 2] :[...]

《 81 》 Protecting images ■ This is used to protect specific shots from being accidentally erased (Lock). It also unprotects images that have been previously protected (Unlock). ● Protecting Images 1. Press the play mode button and press the menu button. 2. Press the LEFT/ RIGHT button and select the [Protect] menu tab. 3. Select a desired s[...]

《 82 》 Deleting images ■ Of all the files stored in the memory card, the unprotected files in the DCIM subfolder will be deleted. Remember that this will permanently delete unprotected images. Important shots should be stored on a computer before deletion takes place. The startup image is stored in the camera's internal memory (i.e., not[...]

《 83 》 Resize 1. Press the play mode button and press the menu button. 2. Press the LEFT/ RIGHT button and select the [Resize] menu tab. 3. Select a desired sub menu by pressing the UP/ DOWN button and press the OK button. ■ Change the resolution (size) of pictures taken. Select [User image] to save an image to be the start-up image. The resi[...]

■ By using the camera’s digital processor, it is possible to add special effects to your images. 1. Press the play mode button and press the menu button. 2. Press the LEFT/ RIGHT button and select the [ Effect] menu tab. 3. Select a desired sub menu by pressing the UP/ DOWN button. [B & W] : Captured images will be stored in black and white[...]

《 85 》 Rotating an image ■ DPOF(Digital Print Order Format) allows you to embed printing information on your memory card’s MISC folder. Select the pictures to be printed and how many prints to make. ■ The DPOF indicator will display on the LCD monitor when an image that has DPOF information plays back. Images can then be printed on DPOF p[...]

《 86 》 DPOF : Standard ■ This function allows you to embed print quantity information on a stored image. 1. Press the play mode button and press the menu button. 2. Press the LEFT/ RIGHT button and select the [DPOF] menu tab. 3. Select the [Standard] menu by pressing the UP/ DOWN button and press the RIGHT button. 4. Select a desired sub menu[...]

《 87 》 DPOF : Print size ● Setting the Print Size 1. Press the play mode button and press the menu button. 2. Press the LEFT/ RIGHT button and select the [DPOF] menu tab. 3. Select the [Size] menu by pressing the UP/ DOWN button and press the RIGHT button. 4. Select a desired sub menu by pressing the UP/ DOWN button and press the OK button. [[...]

《 88 》 Copy T o Card ■ This enables you to copy image files to the memory card. ● Copying to the Memory Card 1. Press the play mode button and press the menu button. 2. Select the [Copy to Card] menu tab by pressing the LEFT/ RIGHT button. 3. Select a desired sub menu by pressing the UP/ DOWN button and press the OK button. - [No] : Cancels[...]

《 89 》 PictBridge [Using the USB cable with Cradle] [Using the USB cable with Camera] ■ Connecting the Camera to a Printer ● Using the USB cable with Cradle : Connect the camera and the cradle. Connect the cradle to a printer’s USB port with the supplied USB cable. ● Using the USB cable with Camera : Connect the camera to a printer’s [...]

《 90 》 PictBridge : Picture Selection ■ Easy printing When you connect the camera to printer in the Play back mode, you can print a picture easily. - Pressing the shutter button : Currently displayed image will be printed with the printer’s default setting. - Pressing the Left / Right button : Selects a previous / next image. [When [One Pic[...]

《 91 》 PictBridge : Print Setting Menu Size Setting the size of the printing paper Auto, Postcard, Card, 4X6, L, 2L, Letter, A4, A3 Setting the number of pictures to be printed on a sheet of paper Type Setting the quality of the printing paper Auto, Plain, Photo, Fastphoto Setting the quality of the picture to be printed Date Setting whether to[...]

1/1 Cancel:OK 《 92 》 PictBridge : Printing ■ Printing Pictures 1. Use the LEFT and RIGHT buttons to select the [Print] menu tab. 2. Use the UP and DOWN buttons to select the desired submenu value, and then press the OK button. [Standard] : Print the pictures stored in the memory card in set numbers. One picture is printed on one piece of pape[...]

《 93 》 PictBridge : RESET 1. Use the LEFT and RIGHT buttons to select the [ Reset] menu tab. 2. Use the UP and DOWN buttons to select the desired submenu value, and then press the OK button. If [No] is selected : Settings will not be reset. If [Yes] is selected : All print and image settings will be reset. ※ Default print setting varies depen[...]

《 94 》 Setup menu Menu tab Main menu Sub menu Secondary menu Page Series - Reset - Power Save 1, 3, 5, 10 min - p.96 ENGLISH 한국어 FRANÇAIS DEUTSCH ESPAÑOL ITALIANO 日本語 Language P”CCK»… PORTUGUÊS DUTCH p.97 DANSK SVENSKA SUOMI BAHASA POLSKI Magyar No - Yes - 05/01/01 13:00 Off yy/mm/dd - dd/mm/yy - mm/dd/yy - Off - Imprint Dat[...]

《 95 》 Setup menu ※ Menus are subject to change without prior notice. Menu tab Main menu Sub menu Secondary menu Page Off - On - Dark - LCD Normal - p.100 Bright - NTSC - PAL - Quick View Off, 0.5, 1, 3 sec - p.103 No - Yes - Video Out AF Lamp Reset p.100 p.101 p.103 ■ This function allows the user to select the file naming format. ● Assi[...]

《 96 》 File name ● The first stored folder name is 100SSCAM, and the first file name is SSL10001. ● File names are assigned sequentially from SSL10001 → SSL10002 → ~ → SSL10099. ● The folder number is assigned sequentially from 100 to 999 as follows: 100SSCAM → 101SSCAM → ~ → 999SSCAM. ● The files used with the memory card c[...]

《 97 》 Language ● Setting Language 1. In any mode with the exception of Voice Recording mode, press the MENU button. 2. Press the LEFT/ RIGHT button and select the [Setup] menu tab. 3. Select the [Language] menu by pressing the UP/ DOWN button and press the RIGHT button. 4. Select a desired sub menu by pressing the UP/ DOWN button and press t[...]

《 98 》 Setting up the Date / T ime / Date type ■ You can change the date and time that will be displayed on the captured images and set up the date type. ● Setting Date/Time & Selecting Date Format 1. In any mode with the exception of Voice Recording mode, press the MENU button. 2. Press the LEFT/ RIGHT button and select the [ Setup] me[...]

《 99 》 Sound Connecting an External Device (USB) ■ If you set the operation sound to ON, various sounds will be activated for camera startup, when button are pressed, and if there is a card error, so that you can be aware of the camera operation status. ● Setting Operation Sounds 1. In any mode with the exception of Voice Recording mode, pr[...]

《 100 》 Auto Focus lamp LCD brightness ● Adjusting LCD Brightness 1. In any mode with the exception of Voice Recording mode, press the MENU button. 2. Press the LEFT/ RIGHT button and select the [ Setup] menu tab. 3. Select the [LCD] menu by pressing the UP/ DOWN button and press the RIGHT button. 4. Select a desired sub menu by pressing the [...]

《 101 》 Selecting V ideo out type ■ The Movie output signal from the camera can be NTSC or PAL. Your choice of output will be governed by the type of device (monitor or TV, etc.) to which the camera is connected. PAL mode can support only BDGHI. ● Setting the Video Out Type 1. In any mode with the exception of Voice Recording mode, press th[...]

《 102 》 Selecting V ideo out type ● NTSC : U.S.A, Canada, Japan, South Korea, Taiwan, Mexico. ● PAL : Australia, Austria, Belgium, China, Denmark, Finland, Germany, U.K., Holland, Italy, Kuwait, Malaysia, New Zealand, Singapore, Spain, Sweden, Switzerland, Thailand, Norway. ● When using a TV as an external monitor, you will need to select[...]

《 103 》 Quick view ■ If you enable Quick View before capturing an image, you can view the image you just captured on the LCD monitor for the duration set in the [Quick View] setup. Quick view is possible only with still images. ● Setting Quick View 1. In any mode with the exception of Voice Recording mode, press the MENU button. 2. Press th[...]

《 104 》 Setting up the Mycam menu ■ You can set up a start up image, start up sound and shutter sound. Every camera working mode (with the exception of Voice recording mode) has the MyCAM menu. The items indicated by are default settings. Menu tab Main menu Sub menu Page Off LOGO User Image 1 User Image 2 Off Sound 1 Sound 2 Sound 3 Off Sound[...]

《 105 》 Start up sound Shutter sound ● Setting the Startup Sound 1. In any mode with the exception of Voice Recording mode, press the MENU button. 2. Press the LEFT/ RIGHT button and select the [Mycam] menu tab. 3. Select the [S.Sound] menu by pressing the UP/ DOWN button and press the RIGHT button. 4. Select a desired sub menu by pressing th[...]

《 106 》 Important notes Be sure to observe the following precautions! ■ This unit contains precision electronic components. Do not use or store this unit in the following locations. - Areas exposed to severe changes in temperature and humidity. - Areas exposed to dust and dirt. - Areas exposed to direct sunlight or the inside of a vehicle in [...]

《 107 》 Important notes ■ Caution on Using the Lens - If the lens is subjected to direct sunlight, it could result in discoloration and deterioration of the image sensor. - Pay attention not to get fingerprints or foreign substances on the surface of the lens. ■ If the digital camera is not used for a long period, an electric discharge can [...]

《 108 》 W arning indicator ■ There are several warnings that may appear on the LCD display Card Error! ㆍ Memory card error → Turn off the camera power and turn it on again → Insert the memory card again → Insert the memory card and format the memory card (p.97) Memory Error! ㆍ Internal memory error → Turn off the camera power and [...]

《 109 》 W arning indicator Low Light! ㆍ When taking pictures in dark places → Take pictures in Flash Photography mode. Out Of Number ㆍ When selecting too many printing pages in the PictBridge menu. → Select printing page within the limitation. ■ Please check the following Before contacting a service centre The camera doesn’t switch [...]

《 110 》 Before contacting a service centre Camera does not take images when pressing the Shutter button ㆍ There is insufficient memory capacity → Delete unnecessary image files ㆍ The memory card has not been formatted → Format the memory card (p.97) ㆍ The memory card is exhausted → Insert a new memory card ㆍ The memory card is loc[...]

《 111 》 Before contacting a service centre The camera buttons do not operate ㆍ Camera malfunction → Remove /re-insert battery and switch the camera on A card error has occurred while the memory card is in the camera. ㆍ Incorrect memory card format → Re-format the memory card The images don't play back ㆍ Incorrect file name (Viola[...]

《 112 》 Specifications Type 1/2.5" CCD Effective Pixel Approx. 5.0 Mega-pixel Total Pixel Approx. 5.1 Mega-pixel Focal Length SHD Lens f = 6.6 ~ 19.8mm (35mm film equivalent : 39 ~ 117mm) F No. F 3.5 ~ F 4.5 Still Image mode : 1.0X ~ 5.0X Play mode : 1.0X ~ 10.1X (depends on image size) LCD Monitor 2.5" color TFT LCD (230,000 pixels) [...]

《 113 》 Specifications Internal memory : Approx. 50MB flash memory External memory : SD card /MMC (Up to 1GB Guaranteed) Still Image : JPEG (DCF), EXIF 2.2, DPOF 1.1, PictBridge 1.0 Movie Clip : AVI (MPEG-4) Audio : WAV 5M : 2592x1944 4M : 2272x1704 3M : 2048x1536 2M : 1600x1200 1M : 1024x768 VGA : 640x480 5M : Super Fine 11, Fine 21, Normal 32[...]

《 114 》 Software Notes Please ensure that you read the instruction manual carefully before use. ㆍ The attached software is a camera driver and image editing software tool for Windows. ㆍ Under no circumstances should all or part of either the software or the user manual be reproduced. ㆍ Copyrights for software are licensed only for use wit[...]

《 115 》 About the software After inserting the CD-ROM provided with this camera into the CD-ROM drive, the following window should automatically run. Before connecting the camera to the PC, you should first install the camera driver. ■ Camera driver : This enables images to transfer between the camera and PC. This camera uses the USB Storage [...]

《 116 》 About the software ■ Digimax Reader : Text recognition program. You can save an image file that was captured in the TEXT mode as a text file with this program. This software is only compatible with Windows. ■ PhotoImpression : Image editing program. You can edit or store still images that you download from the camera. This software [...]

《 117 》 Setting up the application software To use this camera with a PC, install the application software first. After this has been done, the stored images in the camera can be moved to the PC and can be edited by an image editing program. You can visit the Samsung web-site through the internet. http://www.samsungcamera.com : English http://w[...]

《 118 》 Setting up the application software 6. The Software License Agreement window will be displayed. If you agree to this, select [I accept the agreement] and click [Next >] button. The window will then move to the next step. If you disagree, select [I do not accept the agreement] and click [Cancel] button. The installation program will b[...]

《 119 》 Setting up the application software 7. The XviD information window will display. Click the [Next >] button. 8. The destination selection window will open. Click [Next >] button. To copy to the files to another folder, click [Browse...] and choose a folder you want. [Click !] [Click !] 10. The [Select Additional Tasks] window will [...]

《 120 》 Setting up the application software 11. The XviD codec is ready to install. Click the [Install] button. [Click !] 12. Installation is complete. Click the [Finish] button. [Click !] ● If you select [Exit] at step 13, the application program installation will be cancelled. INFORMA TION 13. A window where you can choose the program you w[...]

《 121 》 Setting up the application software ● If you select [Cancel] at step 14, a window for installing Digimax Reader will be displayed. INFORMA TION 15. The Software License Agreement window will be displayed. If you agree to this, click [Yes], the window will then move to the next step. If you disagree, click [No] and the installation pro[...]

《 122 》 Setting up the application software 19. A window will be displayed as shown alongside. Click the [INSTALL] button. - Check the [MANUAL] button. Instructions for using Digimax reader will be displayed. - Click the [EXIT] button and Digimax reader installation will be cancelled and a window for installing PhotoImpression will be displayed[...]

《 123 》 Setting up the application software 26. The Software License Agreement window will be displayed. If you agree to this, click [Yes], the window will then move to the next step. If you disagree, click [No] and the installation program will be canceled. 25. A Welcome window will be displayed. Click the [Next >] button. [Click !] [Click [...]

《 124 》 Setting up the application software 27. A destination selection window will open. Click [Next >]. To copy to the files to another folder, click [Browse...] and choose a folder you want. 28. The [Select Components] window will appear. Click [Next >] button. 29. A window will open, asking you to choose a folder to which program icon[...]

《 125 》 Setting up the application software 31. To apply changes, you must restart the computer. Select [Yes, I want to restart my computer now], and then click [Finish]. [Click !] 33. Turn the camera power on. [Found New Hardware Wizard] will open and the computer will recognise the camera. * If you have ever installed an image viewer program [...]

《 126 》 Setting up the application software ● If you have installed the camera driver, [Found New Hardware Wizard] may not open. ● On a Windows 98 or 98 SE system, the Found New Hardware Wizard dialog box opens and a window asking you to select a driver file may appear. In this case, specify "USB Driver" in the CD supplied. (for W[...]

《 127 》 Starting PC mode ■ Connecting the camera to a PC 1. In any mode with the exception of Voice Recording mode, press the MENU button. 2. Press the LEFT/ RIGHT button and select the [Setup] menu tab. 3. Select the [USB] menu by pressing the UP/ DOWN button and press the RIGHT button. 4. Use the UP and DOWN buttons to select [Computer], an[...]

《 128 》 Starting PC mode 3. Select an image and press the right mouse button. 4. A pop-up menu will open. Click [Cut] or [Copy] menu. - [Cut] : cuts a selected file. - [Copy] : copies files. ■ Downloading stored images You can download the still images stored on the camera to your PC's hard disk and print them or use a photo editing soft[...]

《 129 》 Starting PC mode 7. An image file is transferred from the camera to your PC. 6. Press the right mouse button and a pop-up menu will open. Click [Paste]. - By using [Digimax Viewer], you can see the stored images in the memory directly on the PC monitor and you can copy or move the image files.[...]

《 130 》 Removing the USB Driver for Windows 98SE ■ To remove the USB driver, refer to the process shown below. 1. Trace [Start → Settings] and click [Control Panel]. [Click !] 4. Uninstallation is complete. Click the [Finish] button and the window will disappear. 2. Double-click [Add/Remove programs]. 3. The [Add/Remove Programs Properties][...]

《 131 》 Removable Disk ■ To use this camera as a Removable Disk, install (p.117) the USB Driver. 1. Before turning the camera power on, connect the camera to the PC with the USB cable. 2. Click [Removable Disk] under [My computer] or [Windows Explorer]. 3. Image files stored in the Removable Disk (DCIM → 100SSCAM) can be transferred to the [...]

《 132 》 Removing the removable disk [Click !] [Double-click!] [Click !] [Click !] 2. Double-click the [Unplug or Eject Hardware] icon on the task bar. ■ Windows 2000/ME/XP (The illustrations may be different from the real display in accordance with the Windows O/S.) 1. Check whether the camera and PC are transferring a file. If the camera sta[...]

《 133 》 Removing the removable disk 1. A USB Driver for MAC is not included with the software CD as MAC OS supports the camera driver. 2. Check the MAC OS. You can check the MAC OS version during MAC OS start-up. This camera is compatible with MAC OS 9.2 ~ 10.3. 3. Connect the camera to the Macintosh and turn the camera power on. 4. A new icon [...]

《 134 》 Digimax V iewer 2.1 ● Before deleting images from the camera, you should download images to your computer that you wish to keep. ● Refer to the [Help] menu in Digimax viewer 2.1 for further information. INFORMA TION ■ This software is only compatible with Windows. 1. To open Digimax Viewer, click the [Start → Programs → Samsun[...]

《 135 》 Digimax Reader ■ Digimax Reader is a Text recognition program. You can save an image file that is captured in the Text mode, as a text file with this program. This software is only compatible with Windows. ■ To start the program, click [Start → Programs → Digimax Reader Eng]. The following screen will appear. ■ How to use the [...]

《 136 》 Digimax Reader 4. Select the image you want to save as a text file. * Only an image that was taken with SAMSUNG camera can be opened. 5. Click the Area Analysis( ) icon to scan the image. 6. Part of the image you selected will be displayed as shown. 7. Click the Character Recognition( ) icon. The part selected in the previous step will [...]

《 137 》 Digimax Reader ㆍ With PhotoImpression, you can edit or store still images that you downloaded from the camera. This software is only available in Windows version. ㆍ To start the program, click [Start → Programs → ArcSoft PhotoImpression 4 → PhotoImpression 4]. The following screen will appear. [ Command Button ] [ Tool Bar ] [[...]

《 138 》 Using PhotoImpression ㆍ You can use PhotoImpression to perform the following tasks. ■ Command Button Button Description Imports a picture from an album, a source folder, or the camera/scanner, or captures screen shots of what is being viewed on the current monitor. Selects Cut, Resize, Edit Image, Insert Text, Enhance Picture, Inser[...]

《 139 》 FA Q ■ Please check the following if the USB connection malfunctions. [Case 1] The camera power is off. → Turn the camera power on. [Case 2] USB Driver is not installed correctly. → Install the USB Driver correctly. Refer to page 117. [Case 3] The USB cable is not connected or you are using a cable with an incorrect specification.[...]

《 140 》 FA Q There must be USB Host Controller and USB root hub under [Universal Serial Bus controllers]. In addition, double-click on the USB Universal Host Controller and the USB Root Hub to check if the Device Status states "This device is working properly". If the Device Status says the device is "not working properly", [...]

《 141 》 FA Q ■ When the movie clip doesn’t play back on the PC ※ When the movie clip recorded by the camera doesn’t play back on the PC, the causes are mostly due to the codec installed on the PC. ● When codec for play back the movie clip isn’t installed → Install the codec as listed below. [Installing codec for Windows] 1) Insert[...]

《 142 》 FA Q ● If a PC (Windows 98) stops responding while the camera and PC are connected repeatedly → If a PC (Windows 98) is turned on for a long time and connect the camera repeatedly, the PC may not recognise the camera. In this case, re-start the PC. ● If a PC connected with the camera stops responding while Windows is starting. →[...]

《 143 》 MEMO[...]

《 144 》 MEMO[...]

《 145 》 MEMO[...]

《 146 》 MEMO[...]

《 147 》 MEMO[...]

6806-2652 SAMSUNG TECHWIN CO., LTD. OPTICS & DIGITAL IMAGING DIVISION 145-3, SANGDAEWON 1-DONG, JUNGWONGU, SUNGNAM-CITY, KYUNGKI-DO, KOREA 462-121 TEL : (82) 31-740-8086,8088, 8090, 8092, 8099 FAX : (82) 31-740-8398, 8111 www.samsungcamera.com SAMSUNG OPTO-ELECTRONICS AMERICA, INC. HEADQUARTERS 40 SEAVIEW DRIVE, SECAUCUS, NJ07094, U.S.A. TEL : [...]