Samsung DVD-VR375 инструкция обслуживания

imagine the possibilities Thanks you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.com/global/register DVD & VCR user manual DVD-VR375 01613A-03-VR375-XAA-ENG.indb 1 01613A-03-VR375-XAA-ENG.indb 1 2008-06-11 오후 2:16:44 2008-06-11 오후 2:16:44[...]

2_ getting started getting started WARNING TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER(OR BACK). NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN This symbol indicates that dangerous voltage consisting a risk of electric shock is present within this un[...]

English _3 ● GETTING STARTED This unit can be used only where the power supply is AC 120V, 60Hz. It cannot be used elsewhere. This DVD Recorder & VCR is designed and manufactured to respond to the Region Management Information. If the Region number of a DVD disc does not correspond to the Region number of this , the DVD Recorder & VCR can[...]

4_ getting started getting started Do not defeat the safety purpose of the polarized or grounding- type plug. A polarized plug has two blades with one wider than the other. A groundingtype plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fi t into your out[...]

English _5 ● GETTING STARTED DVD-RAM, DVD±RW and DVD±R Clean with an optional DVD-RAM/PD disc cleaner. Do not use cleaners or cloths for CDs to clean DVD-RAM/DVD±RW/DVD±R discs. DVD-Video, Audio CD Wipe off dirt or contamination on the disc with a soft cloth. Cautions on handling discs Do not write on the printed side with a ball-point pen or[...]

6_ getting started getting started JPEG CD-R/-RW Only JPEG fi les with the ".jpg", ".JPG" extension can be used. The unit can handle a maximum of 1000 fi les and folders. Maximum size of progressive JPEG is 3M pixels. MOTION JPEG is not supported. DVD-RAM/±RW/±R discs that contain JPEG fi les can be played back. Using CD-R/[...]

English _7 ● GETTING STARTED DVD+RW Disc Playback and Recording With DVD+RW discs, there is no difference between DVD-Video format (Video mode) and DVD-Video Recording format (VR mode). Finalizing is generally unnecessary when using a DVD+RW disc. DVD-RAM Disc Playback and Recording For cartridge type DVD-RAM discs, remove the cartridge and use o[...]

8_ getting started getting started GETTING STARTED 2 2 Warning 3 Precaution 10 General Features 11 Before Reading the User’s Manual 12 How to use the DVD Recorder & VCR 13 Unpacking 17 Description CONNECTING & SETTING UP 19 19 Connecting a set top/cable box or satellite receiver to DVD Recorder & VCR 21 Connecting HDMI/DVI to a TV 23 [...]

English _9 ● GETTING STARTED RECORDING 57 57 Recordable discs 58 Recording Mode 59 Unrecordable Video 60 Recording immediately 61 Recording through The DV Input jack 62 Making a One Touch Recording (OTR) 62 Making a Timer Recording 64 Editing the Timer List 64 ERASING the Timer List 65 Basic VCR Recording 66 Check Remaining Time 66 Special Record[...]

10_ getting started getting started GENERAL FEATURES The DVD-VR375 allows you to record, edit and play high quality digital video on DVD-RAM/DVD±RW/DVD±R discs. High quality digital audio/video recording and playback You can record up to approximately 16-hours of video on a double side 9.4 GB DVD-RAM disc,up to 15- hours on a dual-layer 8.5GB DVD[...]

English _11 ● GETTING STARTED BEFORE READING THE USER’S MANUAL Make sure to check the following terms before reading the user’s manual. Icons that will be used in manual Icon Term Defi nition Z DVD This involves a function available with DVD or DVD-R(V)/DVD-RW(V)/+R discs that have been recorded and fi nalized. X RAM This involves a functio[...]

12_ getting started getting started HOW TO USE THE DVD RECORDER & VCR Step 1 : Select the disc type This unit can record on the following types of discs. If you want to repeatedly record on the same disc or you want to edit the disc after recording, select a rewritable DVD±RW or DVD-RAM type disc. If you want to save a recording without making[...]

English _13 ● GETTING STARTED Creating a playlist (DVD-RAM/-RW/-R in VR mode) With this recorder, you can create/edit a new playlist on the same disc without changing the original recording. Step 6 : Finalizing & Playing on other DVD components To play your DVD on other DVD players, fi nalizing may be necessary. First, fi nish all editing a[...]

14_ getting started getting started Connecting the Power Cord After all connections are complete, plug the power cord into a wall outlet. Preparing the Remote Control If the remote control does not operate properly: Check the polarity +/- of the batteries. Check if the batteries are drained. Check if the remote sensor is blocked by obstacles. Check[...]

English _15 ● GETTING STARTED You can control part of another manufacturer’s TV functions with this remote control. Buttons that can be controlled on your TV : TV POWER, INPUT SEL., TV VOL +/-, TRK/CBC CH/TV CH ( , / . ), TV MUTE, 0~9, TV 100+/SET Button. To determine whether your television is compatible, follow the instructions below. Switch [...]

16_ getting started getting started Tour of the Remote Control ❋ This is a special remote control for the visually impaired, and has Braille points on the POWER( ), STOP( ) and PLAY( ) buttons. Playback-related Buttons Forward/Rewind, Search, Skip, Stop, Play, Pause. TV VOL (Volume) Button TV volume adjustment ENTER/DIRECTION Buttons (UP/DOWN or [...]

English _17 ● GETTING STARTED DESCRIPTION Front Panel DVD OPEN/CLOSE BUTTON VCR DECK VCR EJECT BUTTON CH ( . / , ), SEARCH/SKIP BUTTON PLAY/PAUSE BUTTON STOP BUTTON RECORD BUTTON DUBBING BUTTON DVD/VCR SELECT BUTTON FRONT PANEL DISPLAY DVD DECK DV INPUT JACK AUDIO L, R INPUT JACKS (AV 2 IN) VIDEO INPUT JACK (AV 2 IN) POWER BUTTON 10 11 12 13 14 1[...]

18_ getting started getting started Front Panel Display Playback-related indicator In Disc Indicator DVD VIEW Indicator VCR VIEW Indicator Disc Media Indicator TIMER Indicator HDMI Indicator REC Indicator STATUS Indicator Rear Panel HDMI OUT VIDEO INPUT JACK (AV 1 IN) VIDEO OUT JACK (AV OUT) AUDIO OUT JACKS (COMPONENT OUT) COMPONENT VIDEO OUT JACKS[...]

English _19 ● CONNECTING & SETTING UP connecting & setting up CONNECTING A SET TOP/CABLE BOX OR SATELLITE RECEIVER TO DVD RECORDER & VCR TV + Set top/Cable box or satellite receiver + DVD Recorder & VCR With the connection below, you can watch and record your desired channel on the Set top/Cable box or satellite receiver. The DVD-[...]

20_ connecting & setting up connecting & setting up C. Move the Set top/Cable Box's remote across the front of the Set top/Cable Box while pressing the remote's power button On and Off (Figure 2). (Press and release the power button each time you move the remote; holding down the button will not work.) D. When the Set top/Cable bo[...]

English _21 ● CONNECTING & SETTING UP CONNECTING HDMI/DVI TO A TV Connecting to a TV with an HDMI Jack HDMI ( High Defi nition Multimedia Interface) HDMI enables you to make a digital video and audio connection with a single cable. Using HDMI, the DVD player transmits a digital video and audio signal and displays a vivid picture on a TV havi[...]

22_ connecting & setting up connecting & setting up Connecting to a TV with a DVI Jack Using an HDMI-DVI cable (not included), connect the HDMI OUT terminal on the rear of the DVD Recorder & VCR to the DVI IN terminal of your TV. An HDMI to DVI connection requires a separate audio connection, using the audio cables, connect the AUDIO (r[...]

English _23 ● CONNECTING & SETTING UP CONNECTING THE VIDEO OUTPUT Besides HDMI, there are several other ways to connect your DVD Recorder & VCR. Select one of the video connections on the following pages. Connecting to Component Video Input Jacks (Y, P B , P R ) Connect Component video cables (not supplied) between the COMPONENT OUT (Y, P[...]

24_ connecting & setting up connecting & setting up Connecting to a Video Input Jack Connect a video(yellow) cable between the VIDEO(yellow) OUT jack on the DVD Recorder & VCR and VIDEO(yellow) IN jack on the TV. You will enjoy regular quality images. This connection outputs the 480i resolution to your TV. Connect the audio cables(white[...]

English _25 ● CONNECTING & SETTING UP Connecting to a Stereo Amplifi er with Analog Input Jacks If your stereo amplifi er only has AUDIO INPUT jacks(L and R), use the AUDIO OUT (AV OUT) jacks. Connecting to an AV Amplifi er with a Digital Input Jack If your AV amplifi er has a Dolby Digital or DTS decoder and a digital input jack, use thi[...]

26_ connecting & setting up connecting & setting up CONNECTING EXTERNAL DEVICES This allows you to connect your DVD Recorder & VCR to other external devices and view or record their outputs. Connecting a VCR, Set top/Cable box, satellite receiver or DVD player to the AV 1 IN Jack Connecting a VCR or external device to AV 1 IN jacks of t[...]

English _27 ● CONNECTING & SETTING UP Connecting a Camcorder You can record from connected equipment, such as a camcorder by using the AV2 IN or DV IN jacks on front of the DVD Recorder & VCR. Check your camcorder's owner's manual to see how to use the camcorder in this mode. M  Red Yellow White 01613A-03-VR375-XAA-ENG.indb 2[...]

28_ system setup system setup system setup ON-SCREEN MENU NAVIGATION The on-screen menus allow you to enable or disable various functions on your DVD Recorder & VCR. Press the MENU button to open the on-screen menu and then use the following buttons to navigate through the on screen menus. ▲▼ Buttons Press these buttons on the remote contro[...]

English _29 ● SYSTEM SETUP Press the ◄ ► buttons to select OK , then press the ENTER button. Select whether or not you use the Set Top Box Pass-through, then press the ENTER button. Please refer to page 39. The setup display for clock setting appears. Press the ▲▼◄ ► buttons to select the Current Date and Time, then press the ENTER bu[...]

30_ system setup system setup CLOCK SET This menu is used to set the current time. You need to set the time to use timer recording. With the unit in Stop mode/No Disc mode, press the MENU button. Press the ▲▼ buttons to select Setup , then press ENTER . Press the ▲▼ buttons to select Clock Set , then press ENTER . Press the ▲▼◄ ► bu[...]

English _31 ● SYSTEM SETUP Resolution (HDMI) This setting is used when the unit is connected by HDMI or DVI to Display devices (TV, Monitor, etc). 480p : 720 x 480p 720p : 1280 x 720p 1080i : 1920 x 1080i 1080p : 1920 x 1080p AUTO : It will be set to the possible maximum resolution supported by the TV. Connect the DVD-VR375 to your TV via HDMI or[...]

32_ system setup system setup PROGRESSIVE SCAN This function is available when video output is component. This setting enables you to select a desired progressive mode. To view ‘Progressive scan mode’, fi rst connect the component cable. (See page 23) Be sure the Component cables are connected properly. On Off When the HDMI cable (not supplied[...]

English _33 ● SYSTEM SETUP Dolby Digital (DVDs only) Selects the type of Dolby Digital signal. D-PCM : Select this when the recorder is connected to an audio component that does not have a built-in Dolby Digital decoder. Dolby Digital : Select this when the recorder is connected to an audio component with a built-in Dolby Digital decoder. DTS (DV[...]

34_ system setup system setup Scan Audio (DVDs only) On : Outputs audio signals during FF1 fast-forward of a DVD disc with Dolby Digital soundtracks. Off : Turns off the function. No sound is output during FF1 fast-forward. Sound will be interrupted during Scan Audio. If the audio format is LPCM, this function is not supported. Surround Turns on th[...]

English _35 ● SYSTEM SETUP SETTING UP THE FEATURES This function allows you to setup the Features setting. With the unit in Stop mode, press the MENU button. Press the ▲▼ buttons to select Setup , then press the ENTER button. Press the ▲▼ buttons to select Features , then press the ENTER button. Press the ▲▼ buttons to select the desi[...]

36_ system setup system setup EZ Record This function allows you fi nalize a disc automatically. KLCV (V-mode) Press the ▲▼ buttons to select EZ Record , then press the ENTER button. Press the ▲▼ buttons to select On , then press the ENTER button. Press the EXIT button to exit the menu. You can operate EZ Record by using EZ REC MODE button[...]

English _37 ● SYSTEM SETUP You can operate the DVD Recorder & VCR by using TV remote control. (TV buttons that can be used to control the DVD Recorder & VCR : , , , , , , and , buttons, ~ button) When you press Anynet+ button on the TV remote control, the OSD to the right will appear. - Recording : DVDR : Use this option to start or stop [...]

38_ system setup system setup SETTING UP THE PARENTAL The Parental function works in conjunction with DVDs that have been assigned a rating, which helps you control the types of DVDs that your family watches. There are up to 8 rating levels on a disc. With the unit in Stop mode, press the MENU button. Press the ▲▼ buttons to select Setup , then[...]

English _39 ● SYSTEM SETUP Changing the Password Press the ▲▼ buttons to select Change Password , then press the ENTER button. The "Enter your password" message will be displayed. Enter a new 4-digit password using the number buttons on the remote control. The “Confi rm the password” message will be displayed. Enter your new pa[...]

40_ system setup system setup VCR FUNCTION SETTING This function allows you to set up the VCR. With the unit in Stop mode/No Disc mode, press the MENU button. Press the ▲▼ buttons to select Setup , then press the ENTER button. Press the ▲▼ buttons to select Features , then press the ENTER button. Press the ▲▼ buttons to select VCR Funct[...]

English _41 ● SYSTEM SETUP SET TOP/CABLE BOX CONTROL If you have your Set top/Cable box or satellite receiver connected as shown on page 19, it can be controlled after setting up this menu. With the unit in Stop mode/No Disc mode, press the MENU button. Press the ▲▼ buttons to select Setup , then press the ENTER button. Press the ▲▼ butto[...]

42_ system setup system setup SET TOP/CABLE BOX/SATELLITE RECEIVER BRAND CODE TABLE Set top/Cable box brand Set top/Cable box brand Code number 3M 0033 ABC 0003, 0011, 0017, 0008, 0014, Accuphase 0007, 0001, 0013, 0206, 0047, 0237, 0033 0003, 0013, 0047, 0001, 0011, Acorn 0017, 0014, 0206, 0007 1102, 0237 Action 0237 Active 0237, 1102 Aim 0015 Alle[...]

English _43 ● SYSTEM SETUP Set top/Cable box brand Code number Myrio 1117 NET 0274 Next Level 0764, 1316, 1315, 1314 Nexus 0770 Northcoast 0671, 0314 Nova Vision 0277, 0008 Novabeam 0277 Novaplex 0618, 0277, 0017, 0008 NSC 0156, 0070, 0203, 0063, 0400, 0012, 0618, 0022, 0637, 0010, 0044 Oak 0019, 0007, 0303, 0248, 0017 Omega 0015 Omniview 0371 Op[...]

44_ system setup system setup Satellite receiver brand Satellite receiver brand Code number AlphaStar 0772 Atlantic Telephone 1333 Bell ExpressVu 0775 Century 0856 Chaparral 0216 Crossdigital 1109 DirecTV 1887, 0749, 0566, 0392, 1749, 0099, 1109, 1076, 1442, 1856, 0247, 1142, 1639, 0724, 0639, Dish Network System 0775, 1005, 1170 Dishpro 0775, 1005[...]

English _45 ● SYSTEM SETUP CH Digit Lock Select the sub item(Off or Lock to two digits) using the ▲▼ buttons, then press the ENTER button. Off : Select this when your Set top/Cable box or satellite receiver only accepts three or more digit channel numbers. Normally select this. Lock to 2 digits : Select this when your Set top/Cable box or sat[...]

46_ playback playback playback This section introduces basic functions of playback by disc type. Read the following information before playing a disc. REGION CODE (DVD-VIDEO ONLY) Both the DVD Recorder & VCR and the discs are coded by region. These regional codes must match in order for the disc to play. If the codes do not match, the disc will[...]

English _47 ● PLAYBACK DISC TYPES THAT CAN BE PLAYED Disc Types Disc Logo Recorded content Disc Shape or minute DVD-VIDEO VIDEO AUDIO Single sided(5”) Double sided(5”) Single sided(3.5”) Double sided(3.5”) AUDIO-CD AUDIO Single sided(5”) Single sided(3.5”) JPEG JPEG Image Single sided(5”) Single sided(3.5”) MP3 MP3 Audio Single si[...]

48_ playback playback Discs That Cannot be Played DVD-Video with a region number other than “1” or “ALL” 3.9 GB DVD-R Disc for Authoring. A DVD-RW(V)/-R(V)/+R disc which has been recorded and not fi nalized in a different manufacturer's recorder. PAL discs DVD-ROM/PD/MV-Disc/Divx Video Disc, etc. Video CD/CVD/SVCD/CD-ROM/CDV/CD-G/CD-I[...]

English _49 ● PLAYBACK USING THE DISC MENU AND TITLE MENU Some discs contain a dedicated menu system that allows you to select special functions for title, chapters, audio track, subtitles, fi lm previews, information on characters, etc. For DVD-VIDEO Discs Z Disc Menu : Press the DISC MENU button to enter the disc menu of the disc. • Move to [...]

50_ playback playback Skipping Chapters or Tracks ZXCVBKL During playback, press the l ◄◄ or ►► l button on the remote control. If you press the l ◄◄ button If you press the l ◄◄ button, it moves to the beginning of the chapter or track. Pressing the button once again within 3 seconds returns to the beginning of the previous chapter[...]

English _51 ● PLAYBACK USING THE ANYKEY BUTTON The ANYKEY functions allows you to easily search for a desired scene by accessing title, chapter, track and time. You can also change the subtitle and audio settings and set some features including Repeat, and Angle. Moving to a desired scene directly ZXCVKL If you want to move to a certain title, ch[...]

52_ playback playback REMAIN You can check the remaining time of the current title. Press the ANYKEY button during playback. SELECTING THE SUBTITLE LANGUAGE Z This enables you to select the available subtitle languages on a disc. Subtitle languages may not work depending on the disc type. This is only available during playback. You can also operate[...]

English _53 ● PLAYBACK PLAYING BACK AN AUDIO CD (CD-DA)/MP3 Buttons on the Remote Control Used for Audio CD(CD-DA)/MP3 Playback # button : Returns to the beginning of the current track when pressed during playback. If pressed again, your DVD Recorder & VCR moves to and plays the previous track. If you press this button within three seconds af[...]

54_ playback playback Playing an MP3 Disc Insert an MP3 disc into the disc tray. The menu is displayed Press the ▲▼ buttons to select Music , then press the ENTER button. Press the ▲▼ buttons to select the track you want to hear, and then press the ENTER button. MP3 Screen Elements Current track (song) : Displays the number of the track cur[...]

English _55 ● PLAYBACK Press the ANYKEY button to display the menu bar. Press the ANYKEY button again to clear the menu bar. If select the Photo, JPEG fi les will only be displayed. If there are no JPEG fi les, empty folder will only be displayed. Music/Photo Simultaneous Playback Insert a Mixed disc(Music+JPEG) into the disc tray. Press the ?[...]

56_ playback playback Slow motion In Pause mode, press ( ) button for slow motion. Press the ( ) button repeatedly to play slow motion at 1/10, 1/7, 1/5 normal speed. Press the PLAY button twice to resume normal viewing. S-VHS Playback The DVD Recorder & VCR allows you to playback high quality S-VHS tapes. Insert an S-VHS tape into the VCR deck[...]

English _57 ● RECORDING recording This section explains various DVD recording methods. This unit can record on various types of discs. Before recording, read the following instructions and select the disc type according to your preference. RECORDABLE DISCS This recorder can record on the following discs. DVD-RAM DVD-RW DVD-R DVD+RW DVD+R DVD±RWs[...]

58_ recording recording Finalize - This closes the DVD-RW/±R so no additional recording can be done. - The DVD-RAM/+RW disc cannot be fi nalized. Unfi nalize - This allows additional recording on a DVD-RW disc originally recorded on the DVD-VR375. - A DVD-RW disc that has been recorded by DAO(Disc At Once) on a PC cannot be unfi nalized. - A DV[...]

English _59 ● RECORDING UNRECORDABLE VIDEO Pictures with copy protection cannot be recorded on this DVD Recorder & VCR. When the DVD Recorder & VCR receives a copy guard signal while recording, recording stops and the following message (to the left) appears on the screen. Concerning Copy Control Signals TV broadcasts that contain copy con[...]

60_ recording recording RECORDING IMMEDIATELY KLXCV Before you start Make sure the antenna cable is connected. Press the OPEN/CLOSE button and place a recordable disc on the disc tray. Check the remaining time on the disc. DVD-RAM/DVD±RW/+R discs should be formatted or initialized in advance before beginning recording. Most new discs are sold unfo[...]

English _61 ● RECORDING You can not change the recording mode and the program while recording. Recording will stop automatically if there is no free space left on the disc. Up to 99 titles can be recorded onto a DVD-RAM/-RW/-R disc, up to 49 titles onto a DVD+RW/+R disc. If the power interrupted due to power failure or other reasons, the title be[...]

62_ recording recording MAKING A ONE TOUCH RECORDING (OTR) One-Touch Recording (OTR) allows you to add recording time in preset increments up to 8 hours by pressing the REC button repeatedly. XCVKL If you want to record through a connected external component, press the INPUT SEL. button to select an appropriate external input (AV1, AV2 or DV). Pres[...]

English _63 ● RECORDING Media : Select the media to record (DVD or VCR). Date : Date that the timer recording starts - Sets the date using ▲ button. - To record the same program every day or the same day every week, press ▼ button. see below : 1month later Sat Mon Sun Mon-Fri Mon-Sat Sun-Sat Today Start/End Time : Start and end time of the ti[...]

64_ recording recording The timer recording time may differ from the set time depending on disc status and overall timer recording status (for example, recording times overlapping, or when the previous recording ends within 3 minutes before the start time of the next recording.) EDITING THE TIMER LIST Follow these directions to edit the timer recor[...]

English _65 ● RECORDING BASIC VCR RECORDING Before starting Check the remaining time on the tape. You can record a TV show in progress by inserting a blank tape and pressing the ● (REC) button. You can even add time in preset increments up to 4 hours by pressing the ● (REC) button repeatedly. Be sure your videotape has a Record Safety Tab. If[...]

66_ recording recording CHECK REMAINING TIME Press the INFO button on the remote control. The following information will be displayed. (Current deck status, recording speed, remaining time, input channel, current time.) SPECIAL RECORDING FEATURES While a recording is in progress, you can watch a DVD or VCR. (for example, you can watch VCR playback [...]

English _67 ● RECORDING Dubbing from DVD to VCR XCVKL  With the unit in Stop mode, press the MENU button. Press the ▲▼ buttons to select Dubbing , then press the ENTER button. Press the ▲▼ buttons to select Simple Dubbing , then press the ENTER button. Press the ▲▼ buttons to select DVD ➞ VCR , then press the ENTER button. The Me[...]

68_ recording recording DV/D8 DUBBING Before DV Dubbing, connect the DV output jack of camcorder to the DV input jack of DVD Recorder & VCR using a DV cable. With the unit in Stop mode, press the MENU button in stop mode. Press the ▲▼ buttons to select Dubbing , then press the ENTER button. Press the ▲▼ buttons to select DV/D8 Dubbing ,[...]

English _69 ● EDITING editing This section introduces basic functions of DVD editing and explains both edit functions for recording on a disc and edit functions for the entire disc. PLAYING THE TITLE LIST Follow these instructions to play back a scene from the Title List. XCVKL Press the TITLE LIST button. The Title List screen is displayed. Pres[...]

70_ editing editing BASIC EDITING (TITLE LIST) Changing the Name of a Title (Title Name) Follow these instructions to rename a title list name, i.e., to edit the title of a recorded program. XCVKL Press the TITLE LIST button. The Title List screen is displayed. Press the ▲▼ buttons to select a title you want to rename from the Title List, then [...]

English _71 ● EDITING Erasing a Title (Title Erase) Follow these instructions to delete a title from the Title List. XCVKL Press the TITLE LIST button. The Title List screen is displayed. Press the ▲▼ buttons to select a title you want to erase in the Title List, then press the ENTER button. Press the ▲▼ buttons to select Title Erase , th[...]

72_ editing editing You can also erase chapters from a Playlist title. If you erase an original title used in a Playlist, that Playlist is also erased. Erasing a section of a Title (A-B Erase) Follow these instructions to erase a section of a Title List entry. XCVK (VR mode) Press the TITLE LIST button. The Title List screen is displayed. Press the[...]

English _73 ● EDITING The length of the section to be deleted must be at least 5 seconds long. End point cannot be marked earlier than start point. The section cannot be deleted when it includes a still picture. Dividing a title into two (Divide Title) Follow these instructions to divide a title into two. XCVK (VR mode) Press the TITLE LIST butto[...]

74_ editing editing The image and time at the start point are displayed on the Start window. Select the starting point of the section from which you want to create a new scene using the playback related buttons. Playback related buttons : ( ,,, ,, ) Press the ENTER button at the end point. The image and end point time are displayed in the End windo[...]

English _75 ● EDITING Changing the Name of a Playlist Follow these instructions to rename a playlist title, i.e. to edit the title of a playlist title. XCV (VR mode) Press the TITLE LIST button with the disc stopped, then press the PLAY LIST button. The Edit Playlist screen is displayed. Press the ▲▼ buttons to select the title you want to re[...]

76_ editing editing DISC SETTING Menu items may vary, depending on the existence of a recorded title. Editing the Disc Name Follow these instructions to give a name to a disc. XCVKL With the unit in Stop mode, press the MENU button. Press the ▲▼ buttons to select Disc Setting , then press the ENTER button. Press the ▲▼ buttons to select Dis[...]

English _77 ● EDITING Formatting a Disc Use these instructions to format a disc. Disable disc protection before formatting. XCK With the unit in Stop mode, press the MENU button. Press the ▲▼ buttons to select Disc Setting , then press the ENTER button. Press the ▲▼ buttons to select Disc Format , then press the ENTER button. DVD+RW You w[...]

78_ editing editing Finalizing a Disc After you record titles onto a DVD-RW/DVD±R disc with your DVD Recorder & VCR, it needs to be fi nalized before it can be played back on external devices. CVL With the unit in Stop mode, press the MENU button. Press the ▲▼ buttons to select Disc Setting , then press the ENTER button. Press the ▲▼ [...]

English _79 ● EDITING Disc Information XCVLK With the unit in Stop mode, press the MENU button. Press the ▲▼ buttons to select Disc Setting , then press the ENTER button. Press the ▲▼ buttons to select Disc Information , then press the ENTER button. The Disc Information is displayed. Erase All Titles XKCV (VR mode) With the unit in Stop m[...]

80_ reference reference TROUBLESHOOTING (DVD-VIDEO/DVD-RAM/DVD±RW/DVD±R) If your product malfunctions, go through the check points below before contacting Samsung customer service. PROBLEM EXPLANATION/SOLUTION No power. • Check whether the power cord is securely plugged into the power outlet. • Did you press the power button of your DVD Recor[...]

English _81 ● REFERENCE TROUBLESHOOTING (DVD) PROBLEM EXPLANATION/SOLUTION icon appears on the screen. You cannot use the operation or function due to one of the following reasons: (1) Your DVD disc does not support the feature (for example, angles) (2) You've requested a title, chapter, or scan time that is out of the correct range. Play mo[...]

82_ reference reference TROUBLESHOOTING (VCR) Before contacting Samsung customer service, perform the following simple checks. PROBLEM EXPLANATION/SOLUTION No power • Check that the power plug is connected to a wall outlet. • Have you pressed the POWER button? You cannot insert a video cassette • A video cassette can only be inserted with the[...]

English _83 ● REFERENCE PROBLEMS AND SOLUTIONS (DISPLAY ERROR MESSAGE) Before contacting a Samsung authorized service center, perform the following simple checks. PROBLEM EXPLANATION/SOLUTION You cannot record a copy protected movie. • You can’t record the video since it is protected by copyright. You cannot record. This disc is protected. ?[...]

84_ reference reference PROBLEMS AND SOLUTIONS (DISPLAY ERROR MESSAGE) PROBLEM EXPLANATION/SOLUTION Error is detected on the disc. • You can’t use the disc because it contains errors from previous recordings. Use the disc after formatting. System error is found. Please try it again after turning off the power. • When operating, errors happen.[...]

English _85 ● APPENDIX appendix SPECIFICATIONS General Power requirements 120V AC, 60Hz Power consumption 25 Watts Weight 9.7 lb Dimensions 16.9In(W) x 13.0In(D) x 3.1In(H) Operating temp. +41°F to +95°F Other conditions Keep level when operating. Operate in less than 75% humidity Input Video 1.0 V p-p at 75 Ω load, sync negative Max. Audio In[...]

SAMSUNG DVD RECORDER & VCR LIMITED WARRANTY TO ORIGINAL PURCHASER This SAMSUNG brand product, as supplied and distributed by Samsung Electronics America, Inc. (SAMSUNG) and delivered new, in the original carton to the original consumer purchaser, is warranted by SAMSUNG against manufacturing defects in materials and workmanship for a limited wa[...]

Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. Region Country Contact Center  Web Site North America CANADA 1-800-SAMSUNG(726-7864) www.samsung.com/ca MEXICO 01-800-SAMSUNG(726-7864) www.samsung.com/mx U.S.A 1-800-SAMSUNG(726-7864) www.samsung.com/us[...]

HEADQUARTERS 105 Challenger Road, Ridgefield Park, N.J.07660-0511 TEL: 1-800-SAMSUNG SERVICE DIVISION 400 Valley Road, Suite 201 Mount Arlington, NJ 07856 1-800-SAMSUNG (726-7864) www.samsung.com Code No. AK68-01613A-01 01613A-03-VR375-XAA-ENG.indb 88 01613A-03-VR375-XAA-ENG.indb 88 2008-06-11 오후 2:19:36 2008-06-11 오후 2:19:36[...]