Samsung ED55C инструкция обслуживания

LFD DISPLA Y User Manual The color and the appearance may diff er depending on the product, and the specifications are subject to change without prior notice to improv e the per formance. ED32C ED40C ED46C ED55C[...]

T able of con tents Before U sing the Pr oduc t Cop yright 5 Safety Precautions 6 Symbols 6 Cleaning 6 Storage 7 Electricity and S afety 7 Installation 8 Operation 10 Pr eparations Checking the Conten ts 13 Removing the P ack aging (for ED32C, ED40C and ED46C models only) 13 Removing the P ack aging (for ED55C models only) 14 Checking the Component[...]

T able of con tents Screen Adjustmen t Picture Mode 81 If the input source is PC, HDMI(PC) 81 If the input source is HDMI(A V ) 81 Backlight / Contr ast / Brightness / Sharpness / Color / T int (G/R) 82 Picture S ize 83 Picture S ize 83 Position 84 Resolution Select 84 A uto Adjustment 85 PC Screen Adjustment 85 PIP 86 Advanc ed Settings 87 Dynamic[...]

T able of con tents Safety Lock 110 Button Lock 111 Standby Contr ol 111 Lamp Schedule 111 OSD Display 112 P ower On Adjustment 112 T emperature Contr ol 112 Change PIN 113 Anynet+ (HDMI-CEC) 114 Anynet+ (HDMI-CEC) 114 A uto T urn Off 115 T roubleshooting for An ynet+ 116 Magic Clone 118 Reset Sy stem 118 Reset All 119 S upport Software U pd ate 12[...]

5 Befor e U sing the P roduc t Chapter 01 C opyright The contents of this manual are subject to change without notice to impr ove quality. © 2013 Samsung Electronics Samsung Electronics owns the copyright for this manual . Use or reproduction of this manual in parts or entirety without the authorization of Samsung Elec tronics is prohibit ed. Micr[...]

6 Safety Pr ecautions Caution RISK OF ELEC TRIC SHOCK DO NOT OPEN Caution : TO REDUCE THE RISK OF ELEC TRIC SHOCK , DO NOT REMOVE COVER. (OR BA CK ) THERE ARE NO USER SER VICEABLE P ARTS INSIDE. REFER ALL SER VICING T O QUALIFIED PERSONNEL. This symbol indicates that high voltage is pr esent inside. It is dangerous to make any k ind of contact with[...]

7 Stor age High- glossy models can develop white stains on the surface if an ultrasonic wave humidifier is used nearby . ― Contact Customer Service Center if the inside of the product needs cleaning (ser vice fee will be charged). Electricit y and Safety ― The following images ar e for ref erence only . Real-life situations may differ fr om wha[...]

8 Caution Do not disconnect the power cord while the product is being used. • The product may become damaged by an electric shock. ! Only use the power cord pr ovided with your product by Samsung. Do not use the power cord with other pr oducts. • A fire or electric shock may result. ! Keep the power socket where the power cord is connected unob[...]

9 Do not install the product on an unstable or vibrating sur face (insecure shelf , sloped sur face, etc .) • The product may fall and become damaged and/or cause an injury. • Using the product in an area with excess vibration ma y damage the product or cause a fire. ! Do not install the product in a vehicle or a place exposed to dust, moisture[...]

10 Operation W arning There is a high voltage inside the pr oduct. Never disassemble, repair or modify the product yourself . • A fire or electric shock may result. • Contact Samsung Customer Service Center for repairs. ! Before mo ving the product, turn off the power switch and disconnect the power cable and all other connected cables. • Dam[...]

11 ! Do not use or keep combustible spray or an inflammable substance near the product. • An explosion or fire may r esult. Ensure the vents ar e not blocked by tablecloths or cur tains. • An increased internal temperature ma y cause a fire. 1 00 Do not inser t metallic objects (chopsticks, coins, hairpins, etc) or objects that burn easily (pap[...]

12 ! Rest your eyes for mor e than 5 minutes for every 1 hour of product use. • Eye fatigue will be relieved . Do not touch the screen when the product has been turned on for an extended period of time as it will become hot. ! Store small accessories out of the reach of childr en. ! Exercise caution when adjusting the pr oduct angle or stand heig[...]

13 P repar ations Chapter 02 Checking the Cont ents Removing the P ackaging (for ED32C, ED40C and ED46C models only) ― This image is for r eference only . 1 Open the packaging box. Be careful not to damage the product when you open the packaging with a sharp instrument. 2 Remove the styrofoam fr om the product. 3 Check the product and remove the [...]

14 Removing the P ackaging(for ED55C models only) ― The following images ar e for ref erence only . Real-life situations may differ fr om what is shown in the images. 1 Remove the black locking device at the bottom of the box. 3 2 1 2 Using the groov es in the box, lift and remove the top of the box. 3 Check the components and remove the styrof o[...]

15 - Contact the vendor where you purchased the product if any components are missing. - The appearance of the components and items sold separately may diff er from the image shown. - A stand is not provided with the product. T o install a stand, you can purchase one separately . Componen ts ― Components may differ in diff erent locations. Quick [...]

16 P ar ts Reverse Side Remote Sensor POWER Po r t Description HDMI IN Connects to a source device using an HDMI cable. SERVICE (5V 0.5A) This port is used to upgrade the software. RGB IN Connects to a source device using a D-SUB cable. A UDIO OUT Connects to the audio of a source device. RGB / HDMI A UDIO IN Receives sound from a PC via an audio c[...]

17 Anti-theft Lock ― An anti-theft lock allows you to use the product securely even in public places . ― The locking device shape and lock ing method depend on the manufacturer . Refer to the user guide provided with y our anti-theft lock ing device for details. T o lock an an ti-thef t locking device: ― Stand: Sold separately 1 F ix the cabl[...]

18 - Remote control button functions may differ for diff erent products. Remote C ontrol ― Using other display devices in the same space as the remote contr ol of this product can cause the other display devices to be inadvertently controlled. MENU OFF VOL CH SOURCE CONTENT (HOME) MagicInfo Lite BLANK .QZ 1 ABC 2 DEF 3 GHI 4 JKL 5 MNO 6 DEL-/-- M[...]

19 TOOLS INFO MAGICINFO 3D LOCK PC A DVI B HDMI C DP D EXIT RETURN Display information on the screen. Move to the upper , lower , left or r ight menu, or adjust an option's setting. Confirm a menu selection. Exit the current menu. Manually select a connec ted input source fr om PC , HDMI . It sets safe lock function. Quickly selec t frequently[...]

20 Adjusting the OSD with the Remote C ontrol Buttons Description 1 Open the OSD menu. 2 Select from Picture , Sound , Applications , System or Support in the displayed OSD menu screen. 3 Change settings as desired. 4 F inish setting. 5 Close the onscreen display (OSD) menu . Remote Con trol Reception Range 7m ~ 10m 30˚ 30˚ Use the remote contr o[...]

21 Befor e Installing the Product (Installation Guide) 15 ˚ T o prevent injur y , this apparatus must be securely attached to the floor/wall in accordance with the installation instructions. • Ensure that an authorized installation company installs the wall mount. • Other wise, it may fall and cause personal injur y . • Make sure to install [...]

22 A B C E Figur e 1.3 Side view D D Figur e 1.2 Side view Installation on an Indented W all ― Contact Samsung Customer Service Center for further details. Plane view A Minimum 40 mm B Minimum 70 mm C Minimum 50 mm D Minimum 50 mm E Ambient temperature: Under 35 C ― When installing the product on an indented wall, allow at least the space speci[...]

23 Installing the W all M ount 1 Installing the W all Mount Kit The wall mount kit (sold separately) allows you to mount the product on the wall. F or detailed information on installing the wall mount, see the instructions provided with the wall mount. We r ecommend you contact a technician for assistance when installing the wall mount bracket. Sam[...]

24 W all Mount Kit Specications ( VESA) ― Install your wall mount on a solid wall perpendicular to the floor . Before attaching the wall mount to surfaces other than plaster board, please contact your nearest dealer f or additional information. If you install the product on a slanted wall, it may fall and result in sev ere personal injur y . ?[...]

25 Remote C ontr ol (RS232C ) Cable C onnection RS232C Cable Interface RS232C (9 pins) Pin T xD (No.2), RxD (No .3), GND (No.5) Bit rate 9600 bps Data bits 8 bit Parity None Stop bit 1 bit Flow c ontrol None Maximum length 15 m (only shielded type) • Pin assig nment 1 2 3 4 5 6 7 8 9 Pin Signal 1 Detect data carrier 2 Received data 3 T ransmitted[...]

26 • RS232C cable Connector: 9-Pin D-Sub to Stereo Cable 1 5 9 6 -P2- 1 2 3 -P1- -P1- -P1- -P2- -P2- F emale Rx Tx Gnd 2 3 5 --------> <-------- ---------- 3 2 5 Tx Rx Gnd STEREO PL UG (3.5ø)[...]

27 C onnec tion • Connection 1 RS232C IN OUT RS232C IN OUT RS232C IN OUT RS232C IN OUT[...]

28 C ontrol C odes V iewing control sta te (Get c ontrol command) Header Command ID Data length Checksum 0xAA C ommand type 0 Con trolling (Set control c ommand) Header Command ID Data length Data Checksum 0xAA C ommand type 1 V alue Command N o. Command type Command V alue range 1 Po wer control 0x11 0~1 2 Volume contr ol 0x12 0~100 3 Input source[...]

29 P ower c ontrol • F unction A product can be powered on and off using a PC. • Viewing power state ( Get Power ON / OFF Status) Header Command ID Data length Checksum 0xAA 0x11 0 • Setting power ON/Off (Set Power ON / OFF) Header Command ID Data length Data Checksum 0xAA 0x11 1 "P ower" "Po wer": Pow er code to be set on[...]

30 Input source c ontrol • F unction The input source of a product can be changed using a PC. • Viewing input source state (Get Input Source Status) Header Command ID Data length Checksum 0xAA 0x14 0 • Setting the input source (Set Input Source) Header Command ID Data length Data Checksum 0xAA 0x14 1 "I nput Source" "Input Sour[...]

31 Screen mode contr ol • F unction The screen mode of a product can be changed using a PC. Screen mode cannot be controlled when the V ideo W all function is enabled. ― This control can only be used on models that include a T V . • Viewing screen status (Get Screen Mode Status) Header Command ID Data length Checksum 0xAA 0x18 0 • Setting t[...]

32 PIP On/Off control • F unction The PIP mode of a product can be turned on or off using a PC. ― Only available on models that have the PIP function. ― The mode cannot be controlled if V ideo W all is set to On . ― This function is not available in MagicInfo . • Viewing PIP on/off state (Get the PIP ON / OFF Status) Header Command ID Dat[...]

33 V ideo W all Mode Con trol • F unction Video W all mode can be ac tivated on a product using a PC. This control is only available on a pr oduct whose Video W all is enabled. • Viewing video wall mode (Get Video Wall Mode) Header Command ID Data length Checksum 0xAA 0x5C 0 • Setting the video wall (Set V ideo W all Mode) Header Command ID D[...]

34 V ideo W all On • F unction T urn V ideo W all on or off on the product from your comput er . • Get Video W all On/O ff Status Header Command ID Data length Checksum 0xAA 0x84 0 • Set Video W all On/O ff Header Command ID Data length Data Checksum 0xAA 0x84 1 V .Wall_On • V .W all_On: V ideo W all code to be assigned to the pr oduct 1: V[...]

35 10x10 V ideo W all M odel 123456789 10 11 12 13 14 15 O 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 1 0x11 0x12 0x13 0x14 0x15 0x16 0x17 0x18 0x19 0x1A 0x1B 0x1C 0x1D 0x1E 0x1F 2 0x21 0x22 0x23 0x24 0x25 0x26 0x27 0x28 0x29 0x2A 0x2B 0x2C 0x2D 0x2E 0x2F 3 0x31 0x32 0x33 0x34 0x35 0x36 0x37 0x38 0x39 0x3A 0x3B 0x[...]

36 10x10 V ideo W all Model : ( 1 ~ 100) Set Number Data 1 0x01 2 0x02 ... ... 99 0x63 100 0x64 • Ack Header Command ID Data length A ck/Nak r-CMD V al1 V al2 Checksum 0xAA 0xFF 4 'A' 0x89 Wall_Div W all_SNo • Nak Header Command ID Data length Ack/Nak r-CMD V al1 Checksum 0xAA 0xFF 3 'N' 0x89 ERR "ERR": A code show[...]

37 C onnec ting and Using a Sour ce De vice Chapter 03 Befor e Connecting Check the following bef ore you connect this product with other devices. Devices that can be connected to this product include PCs, camcorders , speakers, set top boxes and DVD/Blu-ray Disc players . Pr e - connec tion Checkpoints ― Before connecting a source device , read [...]

38 C onnec ting to a PC • Do not connect the power cable before connecting all other cables. Ensure you connect a source device first bef ore connecting the power cable. • A PC can be connected to the product in a variety of ways. Select a connection method suitable for your PC. ― Connecting par ts may differ in diff erent products. C onnec t[...]

39 C onnec tion Using an HDMI-DVI C able ― When you connect a PC to the product using an HDMI-DVI cable, set Edit Name to DVI PC to access video and audio content stored on the PC. HDMI IN RGB / HDMI A UDIO IN C onnec tion Using an HDMI Cable HDMI IN[...]

40 Changing the Resolution ― Adjust the resolution and r efresh rate in Control P anel on your PC to obtain optimum picture quality . ― The picture quality of TFT -L CDs may degrade if the optimum resolution is not selected. Changing the Resolution on Windo ws XP Go to Contr ol Panel Display Settings , and change the resolution. Changing the Re[...]

41 Changing the Resolution on Windo ws 7 Go to Contr ol Panel Display Screen Resolution , and change the resolution. Changing the Resolution on Windo ws 8 Go to Settings Control P anel Display Screen Resolution , and change the resolution.[...]

42 C onnec ting to a V ideo Devic e • Do not connect the power cable before connecting all other cables. Ensure you connect a source device first bef ore connecting the power cable. • Y ou can connect a video device to the product using a cable. ― Connecting par ts may differ in diff erent products. ― Pr ess the SOURCE button on the remote [...]

43 C onnec tion Using an HDMI Cable Using an HDMI cable or HDMI to DVI C able (up to 1080p) • F or better picture and audio quality, connect to a digital device using an HDMI cable. • An HDMI cable supports digital video and audio signals, and does not require an audio cable . - T o connec t the product to a digital device that does not support[...]

44 C onnec ting to an A udio Sy stem ― Connecting par ts may differ in diff erent products. RGB / HDMI A UDIO IN[...]

45 Changing the Input sourc e HDMI PC PC ---- Source - The displayed image may diff er depending on the model. S ou rce MENU m : T Applica tions Source List ENTER Sou rce allows you to select a variety of sources and change source device names. Y ou can display the scr een of a source device connected to the product. Select a source from source lis[...]

46 U sing MDC Chapter 04 MDC (Multiple Display Control) is an application that allows you t o easily control multiple display devices simultaneously using a PC. C onguring Settings for M ulti C ontrol MENU m : T Syste m Multi Control ENTER Assign an individual ID to y our product. C onguring settings for M ulti C ontrol • ID Setup Assign an[...]

47 MDC Pr ogr am Installation/Uninstallation Installation 1 Inser t the installation CD into the CD-ROM dr ive. 2 Click the MDC Unified installation program. 3 Select a language for installation. Next, click " OK ". 4 When the " W elcome to the InstallShield Wizar d for MDC_Unified " screen appears, click " Next ". 5 I[...]

48 Wha t is MDC? Multiple display control "MDC" is an application that allows you to easily control multiple display devices simultaneously using a PC. C onnec ting to MDC Using MDC via RS-232C (serial data communica tions standards) An RS-232C serial cable must be connected to the serial por ts on the PC and monitor . RS232C IN / OUT RS2[...]

49 C onnec tion Management Connection management includes the Connection list and Connection list modification options. Connection list - Connection list shows the details of the connections such as connection setting (IP/COM, Port No, MA C, and Connection Type), connection status, Set ID Range , and detected devices. Each connection can contain a [...]

50 U ser L ogin Launching the program displays the user log in window. The initial login ID ( Username : admin ) and passw ord ( password : admin ) ar e set to admin . ― After logging in for the first time , make sure to change the password to ensur e securit y . ― T o change the password, go to Home > User Settings . After you are logged in[...]

51 A uto S et ID Auto Set ID f eature assigns a Set ID for all the LFDs connected in daisy-chain of a selected connection. There can be a maximum of 100 LFDs in a connection. The Set ID is assigned sequentially in the daisychain running from 1 t o 99, and then finally to Set ID 0. ― ID for the last 100th LFD is set to 0.[...]

52 Cloning Using the Cloning featur e, you can copy the setting of one LFD and apply it to multiple selected LFDs. Y ou can select specific tab categories or all tab categories for cloning, using the cop y setting option window. ― T o delete the settings you have configured , click the Paste Settings button.[...]

53 C ommand Retr y This featur e is used to specify the maximum number of times the MDC command will be retried in case of there being no reply or a corrupted reply fr om an LFD. The retry count value can be set using the MDC options window. The retry count value must be between 1-10. The default value is 1.[...]

54 Getting Star ted with MDC 2 1 1 T o star t the program, click Start Programs S amsung MDC Unified . The login window appears after the MDC prog ram is launched. Enter the user ID and password . • The default user ID and password ar e admin . • Make sure to change the password after the first login. 2 Click Add to add a display device. SET ID[...]

55 Main Screen Lay out 4 3 2 1 6 5 1 Menu Bar Change the status of a display device or the properties of the program. 2 Device Cat egor y View a list of connected display devices or device groups . 3 Schedule Category View a list of schedules for display devices . 4 Set List Select the display device you want to adjust. 5 Modify the Set List Add, e[...]

56 V olume 1 2 3 ― The volume can be changed or the sound can be muted only f or displays that are turned on. V olume • Adjust the volume of a selected display . • The volume can be adjusted using the slider bar in the range of 0 to 100. Mute • Enable or disable Mute for a selected display . Mute will automatically be disabled if V olume is[...]

57 User L ogin User Settings • Add, delete or edit log in information. Logout • Log out fr om the current user account as follows. • Click Logout . The message " Do you w ant to log admin out? " is displayed • Click Ye s . The user login window appears. • If you do not want to log in, click Close . The program is closed . ― If[...]

58 Color - Color and T int (G/R) are not available if the input sour ce is PC . - C olor , T int ( G/ R) , C olor T one and C olor T emp . are not available if both PC S ource and V ideo S ource are selected. Color • Adjust the colors for the selected display device . Tint ( G/R) • Adjust the tint for the selected display device . Color T one ?[...]

59 MPEG Noise Filt er Reduces MPEG noise to provide impr oved picture quality. • Off / Low / M edium / High / Auto Smart LED Controls the LED backlight to maximize picture clarity. Cinema Black In Movie mode, this feature dims the top and bott om areas of the video image to provide a mor e immersive viewing experience. • Off : Turns off the Cin[...]

60 Adv anced fea tures 3D Con trol 3D M ode Select the 3D input format. 3D L/ R C hange Swap the left and right pictures. 3D 2D Displays the image for the left eye only . 3D A uto V iew If you set 3D Auto V iew to Message Notice , a pop up message window appears when the product receives a 3D signal . 3D O ptimiza tion The overall adjustment of 3D [...]

61 Advanc ed Settings D ynamic C ontrast Adjust the screen contrast. G amma C ontrol Adjust the primary color intensit y . RGB O nly M ode Displays the Red , Green and Blue color for making fine adjustments to the hue and saturation. F lesh T one Emphasize pink “Flesh T one. ” M otion L ighting Reduces power consumption by reducing scr een brig[...]

62 Sound Adjustment - The Bass or T reble item will be disabled if the item is not supported by the selected set. Y ou can change the sound settings. Choose display devices from the list of sets, and select the Sound tab. B ass • Adjust the bass for the selected display . T reble • Adjust the treble f or the selected display. B alance (L/ R) ?[...]

63 F ormat • Select the format to display the split screen. Full Natural H • Select the number of horizontal display devices. • A maximum of 15 displays can be arranged in a row . ― A maximum of 6 can be assigned to V if 15 is assigned t o H . V • Select the number of ver tical display devices. • A maximum of 15 displays can be arranged[...]

64 General User A uto Color • Automatically adjust the screen colors . ― Available only in PC mode. Auto P ower • Set the product to automatically power on. Standby C ontrol • Set the standby mode to activate if an input source is not detected. F an & T empera ture Configure the settings r equired to detect the fan speed and internal te[...]

65 Security Safety Lock • Lock the on-scr een menus. ― T o unlock the menus, set Safety Lock to Off . Button Lock • Lock the buttons on the displa y device. ― T o unlock the buttons, set Button Lock to Off . OSD Display Source OSD • Select whether to display a message when the So urce is changed. Not Optimum Mode OSD • Select whether to[...]

66 Time C lock S et Change the current time on the selected display device according to the time set on a PC. If the time is not set on the display device, null values will be displayed. Timer O n T imer • Repeat : Specify the period for which you want to r epeat the selected Timer . Once , EveryDay , Mon~F ri , Mon~Sat , Sat~Sun , Manual • Hol[...]

67 Holiday Management Holiday Management allows you t o prevent devices that are set to be power ed on by the Timer from turning on at a specified date. ― The Holiday Management function can be enabled or disabled in the Timer settings menu . • Add : Y ou can specify holidays. Click the Add button in the Holiday Management window . • Delete :[...]

68 S creen S aver ― Period (Hour) and T ime (Sec) can be configured when Repeat is selected. ― Start Time and End Time can be configur ed when I nter val is selected. This function prevents screen burn-in when the screen of the selected display device is left idle for an extended period of time. Timer : Y ou can set the timer for Screen Sav er [...]

69 S afety S creen The Saf ety Screen func tion can be used to prevent scr een burn-in when a stationar y image displays on the screen of a display device for an extended period of time. L amp C ontrol Lamp Con trol is used to adjust the backlight to reduce power consumption. Automatically adjust the backlight of the selected display device at a sp[...]

70 Tick er Input tex t while a video or image is displayed and display the t ex t on the screen. Ticker Enable or disable Ticker . • Off / On Message Enter a message to display on the scr een. Timer Set the Start Time and End Time to display a message ( Message ). Position Select an orientation to display a message ( Message ) from Horizontal and[...]

71 T ool Settings Security • Panel C ontrol : T urn on or off the screen of a display device. • Remote Contr ol : Enable or disable the remote control. Reset • Reset Picture : Reset the screen settings. • Reset Sound : Reset the sound settings. • Reset System : Reset the syst em settings. • Reset All : Reset the screen, sound and system[...]

72 Edit C olumn O ptions Configure the settings f or the items that will be displayed on the list of displays. • Language : Select a language to use in the MDC program. After selecting a language, restart the MDC program to use the selected language. • Command Retry Count : Specify the number of retry attempts when a command fails. • Error St[...]

73 M onitor W indow A window appears showing details f or data transfer between the computer and display devices. • Filt er I nformation V iew the program information.[...]

74 Other F unc tions Resizing a Window Place the mouse pointer on a corner of the program windo w. An arro w will appear . Move the arrow to customiz e the size of the program window .[...]

75 Group Management Creating Gr oups Create gr oups and manage the list of sets on a group basis. ― Duplicate group names cannot be used . 1 Right-click and selec t Group Edit in the display device list section on the left side of the program window . - The Add on the same lev el button is enabled only if at least one group is created . 2 In the [...]

76 • Add on the sub lev el : Create a sub- group under the selected gr oup. 3 Enter the group name . Deleting Groups 1 Select a group name, and click Edit . 2 In the Edit Group window displayed, click Delet e . 3 Click Ye s . The group will be deleted .[...]

77 Renaming Groups Rename 1 Select a group name, and click Edit . 2 In the Edit Group window displayed, click Rename . 3 If a cursor appears in the old group name, enter a new gr oup name. Schedule Management Creating Schedules Create and r egister a schedule on a group basis. 1 Click All Schedule List in the schedule section on the left side of th[...]

78 2 Click the Add button. The Add Schedule window will appear . 3 Click Add below the Device Group item, and select the group you want to add a schedule t o. 4 Select Date&Time / Action and click OK . The schedule will be added and a list of schedules will appear in the set list window . - Device Group : Select a group . - Date&T ime Insta[...]

79 T roubleshooting Guide - This program may malfunction sometimes due to a communication problem between the PC and display or electromagnetic waves emitted fr om nearby electronic devices. Issue Solution The display y ou want to contr ol does not appear on the system inf ormation char t. 1 Check the connection of the RS232C cable (check that the [...]

80 How display pr oper ties are shown when multiple displa ys are used 1 When no display is selected: The default value is displayed. 2 When one display is selected: Settings for the selected display are displa yed. 3 When two displays are selected (e.g . in sequence of ID 1 and ID 3): The settings for ID 1 are display ed before the settings f or I[...]

81 Screen A djustment Configure the Picture settings ( Backlight , Color T one , etc.). - The layout of the Picture menu options may vary depending on the product. Chapter 05 P ic ture M ode MENU m : T Picture Picture Mode ENTER 100 100 45 50 50 50 50 · · · · · · Picture Backlight Contrast Brightness Sharpness Color Tint ( G/R) 100 100 45 50 [...]

82 B acklight / C ontr ast / B righ tness / S harpness / C olor / T i nt ( G /R ) MENU m : T Picture ENTER 100 100 45 50 50 50 50 · · · · · · Picture Backlight Contrast Brightness Sharpness Color Tint ( G/R) 100 100 45 50 50 50 Picture Mode Information G 50 R - The displayed image may diff er depending on the model. Y our product has several [...]

83 P ic ture S ize MENU m : T Picture Picture Size ENTER · Picture Siz e P osition Resolution Selec t Picture Size O 16:9 - The displayed image may diff er depending on the model. P ic ture S ize If you have a cable box or satellite r eceiver , it may have its own set of scr een sizes as well. How ever , we highly recommend you use your product[...]

84 P osition · Picture Siz e P osition Resolution Selec t Picture Size O 16:9 - The displayed image may diff er depending on the model. Adjusts the picture position. P osition is only available if Picture Size is set to Zoom1 , Z oom2 , Wide F it , Screen Fit . ― T o use the Position function after selecting Zoom1 , Zoom2 , Wide F it , Screen[...]

85 A uto A djustment MENU m : T Picture Auto Adjustmen t ENTER Picture Auto A djustment - Available in PC mode only . - The displayed image may diff er depending on the model. Adjust frequency values/positions and fine tune the settings automatically . PC S creen A djustment PC Screen Adjustmen t F ine P osition Image Reset Coarse 0 50 - The displa[...]

86 PIP MENU m : T Sys tem PIP ENTER Picture PIP - The displayed image may diff er depending on the model. - F or PIP sound, ref er to the S ound S elect instructions. - If you turn the product off while watching in the PIP mode, the PIP function is reset to off . When you turn your product on, you must turn PIP on again to watch in the PIP mode. - [...]

87 A dvanc ed S ettings MENU m : T Picture Advanced Settings ENTER Advanc ed Settings Black T one Flesh T one RGB Only Mode Color Space Dynamic Contrast O 0 O Native Medium - The displayed image may diff er depending on the model. Input Source Picture Mode Advanc ed Settings PC , HDMI (when a PC is connected) Information White Balance / Gamma[...]

88 Advanc ed Settings Gamma Motion Lighting White Balance 0 O - The displayed image may diff er depending on the model. W hit e B alance Adjust the color temperature f or a more natural picture. • R-Offset / G- Offset / B-O ffset : Adjust each color’ s (red, gr een, blue) dark ness. • R-Gain / G- Gain / B- Gain : Adjust each color ’ s (r[...]

89 Picture Options MENU m : T Picture Picture Options ENTER Picture Options Color T emp . Digital Clean View MPEG Noise F ilter HDMI Black Lev el F ilm Mode Dynamic Back light Color T one 10000K O O Normal O O Standard - The displayed image may diff er depending on the model. Select an option using the and arrow keys, and the press . Us[...]

90 Picture Options Color T emp . Digital Clean View MPEG Noise F ilter HDMI Black Lev el F ilm Mode Dynamic Back light Color T one 10000K O O Normal O O Standard - The displayed image may diff er depending on the model. C olor T one If the input source is PC , HDMI (PC connection). • Off / Cool / Standard / W arm If the input source i[...]

91 Picture Options F ilm Mode Dynamic Back light HDMI Black Lev el O O Normal - The displayed image may diff er depending on the model. HDMI B lack L eve l Selects the black level on the screen to adjust the screen depth. • Normal / Low ― Available only in HDMI mode (A V Timing : 480p, 576p, 720p , 1080i, 1080p). F ilm M ode This mode is [...]

92 P ic ture O Picture Reset Picture Picture O - The displayed image may diff er depending on the model. The product screen is turned off but the audio will continue. Press any key on your remote to turn the screen back on. R eset P ic ture Picture Reset Picture Picture O - The displayed image may diff er depending on the model. Resets you[...]

93 Sound Adjustmen t Configure the sound ( Sound ) settings for the pr oduct. Chapter 06 S ound M ode MENU m : T Sound Sound M ode ENTER Sound Sound Eect Speaker Settings Reset Sound Sound Mode Standard - The displayed image may diff er depending on the model. Y ou can select a sound mode to suit your personal pref erences. • Standard : Select[...]

94 S ound E ec t MENU m : T Sound Sound Effec t ENTER Sound Sound Eect Speaker Settings Reset Sound Sound Mode Standard - The displayed image may diff er depending on the model. Configure your pr eferred sound effect f or output sound. ― If Speaker Selec t is set to External , Sound Effect is disabled. ― Available only when Sound Mode is [...]

95 S peak er S ettings MENU m : T Sound Speaker Settings ENTER Sound Sound Eect Speaker Settings Reset Sound Sound Mode Standard - The displayed image may diff er depending on the model. • Speaker Select ( External / Internal / Receiver ) If you are listening to the sound track of a broadcast or mo vie through an external receiver , you may he[...]

96 A pplications Chapter 07 S ou rce L ist Sou rce allows you to select a variety of sources and change source device names. Y ou can display the scr een of a source device connected to the product. Select a source from Sour ce List to display the screen of the selected source. ― The input source can also be changed by using the SOURCE button on [...]

97 S yst em Chapter 08 M enu L anguage MENU m : T Sys tem Menu Language ENTER O System Multi Control Time Eco Solution Screen Burn Pr otection Ticker Menu Language English - The displayed image may diff er depending on the model. Set the menu language. ― A change to the language setting will only be applied to the onscreen menu displa y. It wi[...]

98 M ulti C ontrol MENU m : T Sys tem Multi Control ENTER System Multi Control Time Eco Solution Screen Burn Pr otection Ticker Menu Language English O - The displayed image may diff er depending on the model. C onguring settings for M ulti C ontrol • ID Setup Assign an ID to a set. (Range: 0~99) Pr ess or to select a number , and press . ?[...]

99 T ime MENU m : T Sys tem Time ENTER O Time Sleep Timer Clock Set - The displayed image may diff er depending on the model. Y ou can configure Clock Set or Sleep T imer . Y ou can also set the product to automatically turn on or off at a specified time using the Timer function. C lock S et Set the clock to use the various various timer feature[...]

100 O Time O Timer Holiday Management On Timer - The displayed image may diff er depending on the model. On T imer Set On Timer so that your pr oduct tur ns on automatically at a time and on a day of your choosing . The power is turned on with the specified volume or input source . On Timer : Set the on timer by making a selection from one of[...]

101 O Time O Timer Holiday Management On Timer - The displayed image may diff er depending on the model. O T imer Set the off timer ( Off Timer ) by making a selec tion from one of the seven options . ( Off Timer 1 ~ O ff Timer 7 ) ― Y ou must set the clock befor e you can use Off Timer . • Setup : Select O ff , Once , Ever yd ay , Mon[...]

102 E co S olution MENU m : T Sys tem Eco Solution ENTER O O Eco Solution Eco Sensor Auto P ow er O  Energy Saving O - The displayed image may diff er depending on the model. E nergy S aving Reduce the power consumption by adjusting the screen brightness. • Off / Low / M edium / High E co S ensor T o enhance your power savings, the pi[...]

103 S cr een B urn P r otec tion MENU m : T Sys tem Screen Burn Protection ENTER Screen Burn Pr otection Timer Immediate Display Side Gray Pix el Shift O O O O - The displayed image may diff er depending on the model. T o reduce the possibility of screen burn, this unit is equipped with Pixel Shift screen burn prevention t echnology. Pi[...]

104 Screen Burn Pr otection Timer Immediate Display Side Gray Pix el Shift O O O O - The displayed image may diff er depending on the model. T imer Y ou can set the timer for Scr een Burn Protection . The Pix el Shift feature stops automatically after a specified period of time. • Off • Repeat : Display the image retention-pr eventi[...]

105 Screen Burn Pr otection Timer Immediate Display Side Gray Pix el Shift O O O O - The displayed image may diff er depending on the model. I mmediate D isplay Select the screen saver you want to display immediat ely. • Off / Pixel / Rolling Bar / F ading Screen S ide G ray When the screen is set to 4:3 aspect ratio, adjust the brigh[...]

106 T icker MENU m : T Sys tem Ticker ENTER System Screen Burn Pr otection Ticker Video W all Source Aut oSwitch Settings - The displayed image may diff er depending on the model. Input text while a video or image is displayed and display the text on the screen. • Off / On ― Message , Time , P osition , Motion , and Font Options ar e enabled on[...]

107 V ideo W all MENU m : T Sys tem Video W all ENTER · · · · Video W all F ull 1 1 F ormat Horizontal V er tical Screen P osition Video W all On - The displayed image may diff er depending on the model. - Some models may not support the M agicInfo function. - The V ideo W all option is only enabled when PIP is set to O . - If more than four[...]

108 · · · · Video W all F ull 1 1 F ormat Horizontal V er tical Screen P osition Video W all On - The displayed image may diff er depending on the model. V er tical This function automatically divides the screen according to the specified number of v er tical displays. Enter the number of vertically arranged displays. The vertical screen will a[...]

109 S ou rce A u to S witch S ettings MENU m : T Sys tem Source AutoSwit ch Settings ENTER · · · Source A utoSwitch Settings O All PC Primary Source Recovery Primary Source Secondar y Source Source Aut oSwitch On - The displayed image may diff er depending on the model. T urning on the display with Source AutoS witch On , and the previous vid[...]

110 G ener al MENU m : T Sys tem General ENTER O O O O O O General Game Mode Auto P ow er Safety Lock Button Lock Standby Con trol Lamp Schedule Max. Po wer Saving On - The displayed image may diff er depending on the model. M ax. P o wer S aving T urns off the product to reduce power consumption after the PC has been left idle fo[...]

111 O O O O O O General Game Mode Auto P ow er Safety Lock Button Lock Standby Con trol Lamp Schedule Max. Po wer Saving On - The displayed image may diff er depending on the model. B utton L ock This menu can be used to lock the buttons on the product. Only the remote contr ol can control the product if Button Lock is set to On .[...]

112 General P ower On Adjustment T emperature C ontrol 0 sec 77 OSD Display - The displayed image may diff er depending on the model. OSD D ispla y Displays or hides a menu item on the screen. ― Source OSD / No Signal OSD / MDC OSD P ower On A djustment Y ou can set the warm-up time for the scr een to turn on after the power button is pressed. (R[...]

113 C hange PIN MENU m : T Sys tem Change PIN ENTER System Change PIN - The displayed image may diff er depending on the model. The Change PIN screen will appear . Choose any 4 digits f or your PIN and enter it in Enter New PIN . Reenter the same 4 digits in C onfirm New PIN . When the Confirm screen disappears, pr ess the Close button. The product[...]

114 A nynet + (HDMI - CEC ) MENU m : T Sys tem Anynet+ (HDMI-CEC) ENTER Anynet+ (HDMI-CEC) Auto T urn O Anynet+ (HDMI-CEC) Ye s On - The displayed image may diff er depending on the model. - The A nynet + (HDMI - CEC ) functions do not operate with other manufacturers’ pr oducts. - F or instructions explaining how to connect Anynet+ external d[...]

115 Anynet+ (HDMI-CEC) Auto T urn O Anynet+ (HDMI-CEC) Ye s On - The displayed image may diff er depending on the model. A uto T urn O Setting an Anynet+ Device to turn Off automatically when the product is turned off. • No / Ye s ― If Auto T urn Off is set to Ye s , running external devices will turn off at the same time as the product p[...]

116 T roubleshooting f or An ynet+ Pr oblem Possible Solution Anynet+ does not w ork. • Check if the device is an Anynet+ device. The Anynet+ syst em suppor ts Anynet+ devices only . • Y ou can connect only one receiver (home theater). • Check if the Anynet+ device power cor d is properly connected. • Check the Anynet+ device ’ s Video/Au[...]

117 Pr oblem Possible Solution The connected device is not displayed . • Check whether or not the device suppor ts Anynet+ functions. • Check whether or not the HDMI cable is properly connected. • Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ System menu. • Search Anynet+ devices again. • Anynet+ requir es an HDMI connectio[...]

118 R eset S yst em MENU m : T Sys tem Reset System ENTER System Reset System - The displayed image may diff er depending on the model. This option returns the current settings under system to the default factory settings. M agic C lone MENU m : T Sys tem Magic Clone ENTER Magic Clone Clone F rom USB Clone to USB - The displayed image may diff er d[...]

119 R eset A ll MENU m : T Sys tem Reset All ENTER System Reset All - The displayed image may diff er depending on the model. This option returns all the current settings for a displa y to the default factor y settings.[...]

120 S uppor t Chapter 09 S oft war e U pd ate MENU m : T Suppor t Software Update ENTER The Software Update menu lets you upgrade your pr oduct soft ware to the latest version. ― Be careful not to turn off the power until the upgrade is complet e. The product will turn off and on automatically after completing the software upgrade. ― When you u[...]

121 C ontac t S amsung MENU m : T Suppor t Con tac t Samsung ENTER View this information when your pr oduct does not work properly or when you want to upgrade the software. Y ou can find information r egarding our call centers and how to download pr oducts and sof tware. ― Contact Samsung and find the product Model Code and Software V ersion .[...]

122 T r oubleshooting Guide Chapter 10 Requirements Bef ore C ontacting S amsung C ustomer Ser vice C enter Before calling Samsung Cust omer Ser vice Center , test your product as f ollows. If the problem persists, contact Samsung Customer Service Center . T esting the Product Check if your product is operating normally by using the product test fu[...]

123 Check the follo wings. Installation issue (PC mode) The screen keeps swit ching on and o. Check the cable connection between the product and PC, and ensure the connection is secure. Blank spaces are f ound on all four sides of the screen when an HDMI or HDMI-DVI cable is connected to the product and PC. The blank spaces found on the scr een [...]

124 Screen issue The screen appears unstable and shaky . Check that the resolution and frequency of the PC and graphics card ar e set within a range compatible with the product. Then, change the screen settings if requir ed by referring to the Additional Information on the product menu and the Standard Signal Mode T able. There ar e shadows or ghos[...]

125 Remote contr ol issue The remote c ontrol does not work. Make sure that the batteries are correctly in place (+/-). Check if the batteries are flat. Check for power failur e. Make sure that the power cord is connected. Check for any special lighting or neon sig ns switched on in the vicinity. Source devic e issue A beeping sound is heard when m[...]

126 Q & A Question Answer How can I change the frequency? Set the frequency on your graphics card. • Windows XP: Go to C ontrol P anel Appearanc e and Themes D isplay Settings Advanc ed Monitor and adjust the frequency in Monitor Settings . • Windows ME/2000: Go to C ontrol Panel Display Settings Advanc ed Monitor and adjust the frequency i[...]

127 Question Answer How do I set pow ersaving mode? • Windows XP: Set pow er-saving mode in Contr ol Panel Appearance and Themes Display Screen Saver Settings or BIOS SETUP on the PC. • Windows ME/2000: Set power -saving mode in Control P anel Display Screen Saver Settings or BIOS SE TUP on the PC. • Windows Vista: Set power -saving mode in C[...]

128 Specications Chapter 11 1 Size 2 Display area H V 3 Dimensions ( W x H x D) W D H General Model Name ED32C ED40C ED46C ED55C Panel Siz e 32 Class (31.5" / 80 cm) 40 Class (40" / 101 cm) 46 Class (45.9" / 116 cm) 55 Class (54.6" / 138 cm) Display area 697.6845 mm (H) x 392.256 mm ( V ) 27.5 inches (H) x 15.4 inches ( V ) 8[...]

129 Model Name ED32C ED40C ED46C ED55C Maximum Pixel C lock 148.5 MHz (Analog, Digital) Po wer Supply This product uses 100 to 240V . Refer to the label at the back of the pr oduct as the standard voltage can var y in different countries . Signal connectors Input PC D-Sub, HDMI, Audio In, RS232C In, USB(Ser vice Only) Output Audio Out, RS232C Out E[...]

130 P o werSav er The power-sa ving function of this product reduces power consumption by switching off the screen and changing the color of the po wer LED if the product is not used for a specified period of time. The power is not turned off in power-saving mode. T o switch the screen back on, press an y key on the k eyboard or move the mouse . Po[...]

131 - Horizontal Fr equency The time required t o scan a single line from the left to the right side of the screen is called a horizontal cycle. The reciprocal number of a horizontal cycle is called horizontal frequency. Horizontal frequency is measured in kHz. - Vertical Fr equency The product displays a single image multiple times per second (lik[...]

132 Resolution Horizontal F requency (kHz) V ertical Frequency (Hz) Pix el Clock (MHz) Sync P olarity (H/V ) VESA, 1024 x 768 56.476 70.069 75.000 -/- VESA, 1024 x 768 60.023 75.029 78.750 +/+ VESA, 1152 x 864 67.500 75.000 108.000 +/+ VESA, 1280 x 720 45.000 60.000 74.250 +/+ VESA, 1280 x 800 49.702 59.810 83.500 -/+ VESA, 1280 x 1024 63.981 60.02[...]

133 Appendix Chapter 12 C ontac t SAMSUNG WORLD WIDE ― If you have any questions or comments relating t o Samsung products, please contact the SAMSUNG customer care center . NORTH AMERICA U.S.A 1-800-SAMSUNG(726-7864) http://www.samsung .com CANADA 1-800-SAMSUNG(726-7864) http://www.samsung .com/ca (English) http://www.samsung .com/ca_fr (Fr ench[...]

134 LA TIN AMERICA COL OMBIA 01-8000112112 Bogotá: 6001272 http://www.samsung .com/co COST A RICA 0-800-507-7267 http://www.samsung .com/latin (Spanish) http://www.samsung .com/latin_en (English) DOMINICA 1-800-751-2676 http://www.samsung .com/latin (Spanish) http://www.samsung .com/latin_en (English) ECU ADOR 1-800-10-7267 http://www.samsung .com[...]

135 LA TIN AMERICA PUERTO RIC O 1-800-682-3180 http://www.samsung .com TRINIDAD & TOBAGO 1-800-SAMSUNG(726-7864) http://www.samsung .com URUGU A Y 40543733 http://www.samsung .com VENEZUELA 0-800-100-5303 http://www.samsung .com EUROPE A USTRIA 0810 - SAMSUNG (7267864, € 0.07/min) http://www.samsung .com BEL GIUM 02-201-24-18 http://www.samsu[...]

136 EUROPE FINLAND 030-6227 515 http://www.samsung .com FRANCE 01 48 63 00 00 http://ww w .samsung.com/fr GERMANY 0180 5 SAMSUNG bzw. 0180 5 7267864* (*0,14 €/Min. aus dem dt. Festnetz, aus dem Mobilfunk max. 0,42 €/Min.) http://www.samsung .com GREECE 80111-SAMSUNG (80111 726 7864) only from land line (+30) 210 6897691 from mobile and land lin[...]

137 EUROPE ROMANIA 08008 SAMSUNG (08008 726 7864) TOLL FREE No . http://www.samsung .com SERBIA +381 11 321 6899 (old number still active 0700 7267864) http://www.samsung .com SL OV AKIA 0800 - SAMSUNG(0800-726 786) http://www.samsung .com SP AIN 902 - 1 - SAMSUNG (902 172 678) http://www.samsung .com SWEDEN 0771 726 7864 (SAMSUNG) http://www.samsu[...]

138 CIS RUSSIA 8-800-555-55-55 http://www.samsung .com T ADJIKIST AN 8-10-800-500-55-500 http://www.samsung .com UKRAINE 0-800-502-000 http://www.samsung .com/ua (Uk rainian) http://www.samsung .com/ua_ru (Russian) UZBEKIST AN 8-10-800-500-55-500 http://www.samsung .com ASIA P A CIFIC A USTRALIA 1300 362 603 http://www.samsung .com CHINA 400-810-58[...]

139 ASIA P A CIFIC PHILIPPINES 1-800-10-SAMSUNG(726-7864) for PLD T 1-800-3-SAMSUNG(726-7864) for Dig itel 1-800-8-SAMSUNG(726-7864) for Globe 02-5805777 http://www.samsung .com/ph SINGAPORE 1800-SAMSUNG(726-7864) http://www.samsung .com T AIW AN 0800-329-999 0266-026-066 http://www.samsung .com THAILAND 1800-29-3232 02-689-3232 http://www.samsung [...]

140 MENA OMAN 800-SAMSUNG(726-7864) http://www.samsung .com/ae (English) http://www.samsung .com/ae_ar (Arabic) Q ATA R 800-2255 (800-CALL) http://www.samsung .com/ae (English) http://www.samsung .com/ae_ar (Arabic) SA UDI ARABIA 9200-21230 http://www.samsung .com/sa (Arabic) SYRIA 18252273 http://www.samsung .com/Levant (English) TURKEY 444 77 11 [...]

141 AFRICA SOUTH AFRICA 0860-SAMSUNG (726-7864 ) http://www.samsung .com T ANZANIA 0685 88 99 00 http://www.samsung .com UGANDA 0800 300 300 http://www.samsung .com ZAMBIA 211350370 http://www.samsung .com[...]

142 Responsibility for the P ay Ser vice ( Cost to C ustomers) ― When the ser vice is requested , in spite of in warranty, we may char ge you for a visit from a service technician in the following cases . Not a product defect Cleaning of the product, Adjustment, Explanation, Re-installation and etc. • If a ser vice technician gives instructions[...]

143 C orrect D isposal C orrect D isposal of This Pr oduc t ( W aste Electrical & Electronic Equipment) (Applicable in countries with separate collection systems) This marking on the product, accessor ies or literature indicates that the pr oduct and its electronic accessories (e.g. char ger , headset, USB cable) should not be disposed of with [...]

144 Optimum Picture Quality and Afterimage Burn-in Pr even tion Optimum Picture Quality • T o enjoy the optimum picture quality, go to Contr ol Panel on your PC and adjust the r esolution and refresh rate as f ollows. The picture quality of TFT -L CDs may degrade if the optimum resolution is not selected. - Resolution: 32": HD (1366x768), 40[...]

145 Pr even tion of Afterimage Burn-in What is afterimage burn-in? Afterimage burn-in should not occur when the LCD panel is operating normally . Normal operation refers t o a continuously changing video pattern. If the L CD panel displays a fixed pattern for an extended period of time (more than 12 hours), a slight voltage differ ence may occur be[...]

146 • Avoid combinations of a t ex t color and background color of contrasting brightness. ― Avoid using g rey as it may contribute to afterimage burn-in. ― Avoid using colors of contrasting brightness (black and white; g rey). FLIGHT TIME OZ348 20:30 : : FLIGHT TIME OZ348 20:30 : : • Regular T ex t color Change - Use bright colors of simil[...]

147 License Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of D olby Laboratories. Premium Sound 5.1 ® Manufactured under a license from U .S. Patent No ’ s: 5,956,674, 5,974,380, 5,978,762, 6,487,535, 6,226,616, 7,212,872, 7,003,467, 7,272,567, 7,668,723, 7,392,195, 7,930,184, 7,333,929 and 7,54[...]

148 T erminology 480i / 480p / 720p / 1080i / 1080p ____ Each of the scanning rates above ref ers to the number of effective scanning lines that decides the screen resolution. The scanning rate may be indicated in i (interlaced) or p (progr essive), depending on the scanning method. - Scanning Scanning refers to a pr ocess of sending pixels that fo[...]