Samsung LE40M6 инструкция обслуживания

LCD TV LE32M6 LE40M6 Owner’ s Instr uctions Before operating the unit, please read this manual thoroughly , and retain it for future reference. - AFTER SALES SER VICE - Do not hesitate to contact your retailer or service agent if a change in the performance of your product indicates that a faulty condition may be present. BN68-00956 A -00 ON-SCRE[...]

Precautions W hen Displaying a Still Ima ge A still image may cause permanent damage to the TV screen. • Digital Ready TV : When you select the regular screen (4:3) mode to watch an SD-grade digital broadcast (and the Set-T op Box output is 480p). Although digital broadcasting must be in the wide screen (16:9) HD format, broadcasters sometimes sh[...]

• Integrated Digital TV (Wide-screen): When the TV receives SD-grade (regular) broadcasting signals (receives 480p regular signals). • Digital Ready TV (wide-screen): digital TV: When the TV receives SD-grade (regular) broadcasting signals (with a Set-T op Box). • When you watch an analog (regular) broadcast on a wide-screen TV (with the 4:3 [...]

English-2 Contents C ONNECTING AND P REP ARING Y OUR TV Viewing the Control Panel ......................................................................................... 4 Viewing the Connection Panel ................................................................................... 5 - Connecting an Aerial or Cable T elevision Network .........[...]

English-3 Contents S ETTING THE S OUND Setting the T ruSurround XT (SRS TSXT) .......................................................... 36 Adjusting the V olume Automatically .................................................................... 37 Connecting Headphones ................................................................................[...]

English-4 Viewing the Contr ol P anel SOURCE Displays a menu of all of the available input sources ( TV , Ext. 1, Ext. 2, A V , S-Video, Component, PC, HDMI). Also used to confirm your choice on the on-screen menu. MENU Press to see an on-screen menu of your TV’s features. - + Press to decrease or increase the volume. Also used to select items on[...]

English-5 Viewing the Connection P anel Power Input Whenever you connect an audio or video system to your set, ensure that all elements are switched of f . When connecting an external device, match the colour of the connection terminal to the cable. [Side Panel Jacks] [Rear Panel Jacks] 01 BN68-00956A-00Eng.qxd 7/19/05 8:59 AM Page 5[...]

Viewing the Connection P anel Connecting an Aerial or Cable Television Network T o view television channels correctly , a signal must be received by the set from one of the following sources: - An outdoor aerial - A cable television network - A satellite network Connecting Component Devices (DTV/DVD) - Connect component video cables to component co[...]

English-7 Viewing the Connection P anel Connecting HDMI/DVI - Supports connections between HDMI-connection-enabled A V devices ( Set-T op Box es, DVD players, A V receivers and digital TVs). - No sound connection is needed for an HDMI to HDMI connection. What is HDMI? - HDMI, or high-definition multimedia interface, is a next-generation interface t[...]

English-8 Viewing the Remote Contr ol (All Functions Except T elete xt) Number buttons for direct channel access Automatic Power-off (Refer to page 41) When your remote does not work, change the batteries and press the “RESET” button for 2-3 seconds before use. Picture freeze (Refer to page 25) The performance of the remote control may be affec[...]

English-9 Viewing the Remote Contr ol (T elete xt Functions) Exit from the teletext display P : T eletext next page P : T eletext previous page T eletext Function : Refer to pages 52-54 for details T eletext display/mix both teletext information and the normal broadcast T eletext sub page T eletext cancel T eletext hold T eletext mode selection (LI[...]

English-10 Installing Batteries in the Remote Contr ol 1 Slide the cover out completely . 2 Install two AAA size batteries. Make sure to match the “+” and “–” ends of the batteries with the diagram inside the compartment. 3 Replace the cover . Remove the batteries and store them in a cool, dry place if you won’t be using the remote cont[...]

English-1 1 Switc hing On and Of f The mains lead is attached to the rear of your set. 1 Plug the mains lead into an appropriate socket. Result : The standby indicator lights up on the front panel. The main voltage is indicated on the rear of your set and the frequency is 50 or 60Hz. 2 Press the POWER button on the front of the panel. Result : The [...]

English-12 Becoming Familiar with the R emote Contr ol The remote control is used mainly to: Change channels and adjust the volume. Set up your set using the on-screen menu system. The following table presents the most frequently used buttons and their functions. Button Viewing Function Menu Function Used to display the - next stored channel. Used [...]

English-13 Plug and Play When the set is initially powered ON, several basic customer settings proceed automatically and subsequently. The following settings are available. 1 If the set is in standby mode, press the POWER button on the remote control. Result : The message Start Plug & Play . is displayed. It appears for a little while, and then[...]

English-14 Plug and Play If you want to reset this feature... 1 Press the MENU button. Result : The main menu is displayed. 2 Press the or button to select Setup . Press the ENTER button . Result : The options available in the Setup group are displayed. 3 The Plug & Play is selected. 4 Press the ENTER button . Result : The message Start Plug &a[...]

English-15 Storing Channels Automa ticall y Y ou can scan for the frequency ranges available to you (and availability depends on your country). Automatically allocated programme numbers may not correspond to actual or desired programme numbers. However , you can sort numbers manually and clear any channels you do not wish to watch. 1 Press the MENU[...]

Y ou can store up to 100 channels, including those received via cable networks. When storing channels manually, you can choose: Whether or not to store each of the channels found. The programme number of each stored channel which you wish to identify. 1 Press the MENU button. Result : The main menu is displayed. 2 Press the or button to select Chan[...]

8 If you know the number of the channel to be stored, Press the or button to select Channel and then press the ENTER button. Select C (Air channel) or S (Cable channel) by pressing the or button. Press the button to select channel. Select the required number by pressing the or button and then press the ENTER button. If there is an abnormal sound or[...]

Y ou can exclude the channels you chose from the channels you scanned. When you scan through the stored channels, those you have chosen to skip are not displayed. All channels that you do not specifically choose to skip are displayed during scanning. 1 Press the MENU button. Result : The main menu is displayed. 2 Press the or button to select Chann[...]

English-19 Sor ting the Stored Channels Y ou can exchange the numbers of two channels, in order to: Modify the numeric order in which the channels have been automatically stored. Give easily remembered numbers to the channels that you watch most often. 1 Press the MENU button. Result : The main menu is displayed. 2 Press the or button to select Cha[...]

English20 Assigning Channels Names Channel names will be assigned automatically when channel information is broadcast. These names can be changed, allowing you to assign new names. 1 Press the MENU button. Result : The main menu is displayed. 2 Press the or button to select Channel . Press the ENTER button . Result: The options available in the Cha[...]

Fine T uning Channel Reception If the reception is clear , you do not have to fine-tune the channel, as this is done automatically during the search and store operation. If, however , the signal is weak or distorted, you may have to fine-tune the channel manually. Select the channel that you want to fine tune. 1 Press the MENU button. Result : The [...]

English-22 Changing the Picture Standar d Y ou can select the type of picture which best corresponds to your viewing requirements. 1 Press the MENU button. Result : The main menu is displayed. 2 Press the or button to select Picture . Result : The options available in the Picture group are displayed. 3 Press the ENTER button. 4 Press the ENTER butt[...]

English-23 Adjusting the Custom Pictur e Y our set has several settings which allow you to control picture quality . 1 Press the MENU button. Result : The main menu is displayed. 2 Press the or button to select Picture . Result : The options available in the Picture group are displayed. 3 Press the ENTER button. 4 Press the ENTER button again. Resu[...]

English-24 Changing the Colour T one R esetting the Pictur e Settings to the F actor y Defaults Y ou can select the most comfortable colour tone to your eye. 1 Press the MENU button. Result : The main menu is displayed. 2 Press the or button to select Picture . Result : The options available in the Picture group are displayed. 3 Press the ENTER but[...]

English-25 Changing the Picture Size Y ou can select the picture size which best corresponds to your viewing requirements. 1 Press the MENU button. Result : The main menu is displayed. 2 Press the or button to select Picture . Result : The options available in the Picture group are displayed. 3 Press the ENTER button. 4 Press the or button to selec[...]

English-26 Using the Digital NR (Digital Noise Reduction) F eature If the signal received by your television is weak, you can activate this feature to help reduce any static and ghosting that may appear on the screen. 1 Press the MENU button. Result : The main menu is displayed. 2 Press the or button to select Picture . Result : The options availab[...]

English-27 DNIe (Digital Na tural Image engine) Samsung’s new technology brings you more detailed images with contrast and white enhancement. A new image compensation algorithm gives viewers brighter and clearer images. DNIe technology will match every signal to your eyes. Y ou can see how DNIe improves the picture by setting DNIe Demo mode to On[...]

My Colour Control is to adjust the most preferred colours such as Blue, Green, Pink without interfering with other colours in order for each consumer to enjoy the screen colour of his/her choice. 1 Press the MENU button. Result : The main menu is displayed. 2 Press the or button to select Picture . Result : The options available in the Picture grou[...]

Dynamic Contrast is to automatically detect distribution of inputted visual signal and adjust to create optimum contrast. 1 Press the MENU button. Result : The main menu is displayed. 2 Press the or button to select Picture . Result : The options available in the Picture group are displayed. 3 Press the ENTER button. 4 Press the or button to select[...]

Brightness Sensor Brightness Sensor is to adjust brightness of screen either automatically or manually by detecting brightness of surrounding environment using light detecting sensor . 1 Press the MENU button. Result : The main menu is displayed. 2 Press the or button to select Picture . Result : The options available in the Picture group are displ[...]

English-31 Y ou can display a sub picture within the main picture of set programme or video input. In this way, you can watch the picture of set programme or video input from any connected equipment while watching the main picture. 1 Press the MENU button. Result : The main menu is displayed. 2 Press the or button to select Picture . Result : The o[...]

9 Press the or button to select Position and then press the ENTER button. Select the position of the sub picture by pressing the or button and then press the ENTER button. Result : Y ou can move the sub picture. When the size of the sub picture is set to or , this feature does not work. 10 Press the or button to select Programme and then press the [...]

English-33 Adjusting the V olume Y ou can adjust the volume using your remote control. Press the button to increase the volume. Result : A horizontal bar is displayed and the volume increases until you release the button. The cursor moves to the right to indicate the volume. Press the button to decrease the volume. Result : A horizontal bar is disp[...]

English-34 Switc hing the Sound Of f T empor aril y Y ou can switch the sound off temporarily. Example : You wish to answer the telephone. 1 Press the MUTE button. Result : The sound is switched off and “ Mute ” is displayed . 2 When you wish to turn the sound back on, press the MUTE button again or either of the volume buttons. Result : The so[...]

English-35 Changing the Sound Standar d Adjusting the Sound Settings Y ou can select the type of the special sound effect to be used when watching a given broadcast. 1 Press the MENU button. Result : The main menu is displayed. 2 Press the or button to select Sound . Result : The options available in the Sound group are displayed. 3 Press the ENTER[...]

Setting the T r uSur round XT (SRS TSXT) TruSurround XT is a patented SRS technology that solves the problem of playing 5.1 multichannel content over two speakers. TruSurround delivers a compelling,virtual surround sound experience through any two-speaker playback system, including internal television speakers. It is fully compatible with all multi[...]

Adjusting the V olume A utomatically Each broadcasting station has its own signal conditions, and so it is not easy for you to adjust the volume every time the channel is changed. This feature let you automatically adjust the volume of the desired channel by lowering the sound output when the modulation signal is high or by raising the sound output[...]

English-38 Connecting Headphones Y ou can connect a set of headphones to your set if you wish to watch a TV programme without disturbing the other people in the room. Plug a set of headphones into the 3.5mm mini-jack socket on the rear panel of the set. Result : The sound is heard through the headphones. For further details on how to set your headp[...]

English-39 Listening to the Sound of the Sub Pictur e During the PIP feature is activating, you can listen to the sound of the sub picture. 1 Press the MENU button. Result : The main menu is displayed. 2 Press the or button to select Sound . Result : The options available in the Sound group are displayed. 3 Press the ENTER button. 4 Press the or bu[...]

English-40 Setting and Displaying the Cur rent Time Y ou can set the TV’s clock so that the current time is displayed when you press the INFO button. Y ou must also set the time if you wish to use the automatic On/Off timers. If you disconnect the power cord, you have to set the clock again. 1 Press the MENU button. Result : The main menu is disp[...]

English-41 Setting the Sleep Timer Y ou can select a time period of between 30 and 180 minutes after which the television automatically switches to standby mode. 1 Press the MENU button. Result : The main menu is displayed. 2 Press the or button to select Setup . Press the ENTER button. Result : The options available in the Setup group are displaye[...]

Y ou can set the On/Off timers so that the set will: Switch on automatically and tune to the channel of your choice at the time you select. Switch off automatically at the time you select. The first step is to set the television’s clock (refer to “Setting and Displaying the Current Time” on page 40 ). 1 Press the MENU button. Result : The mai[...]

English-43 Activa ting the Child Lock This feature allows you to prevent unauthorized users, such as children, from watching unsuitable programmes by muting out video and audio. Child Lock cannot be released using the buttons on the lower-right panel. Only the remote control can release the Child Lock setting, so keep the remote control away from c[...]

If no signal is being received or the signal is very weak, a blue screen automatically replaces the noisy picture background. If you wish to continue viewing the poor picture, you must set the "Blue Screen" mode to "Off". 1 Press the MENU button. Result : The main menu is displayed. 2 Press the or button to select Setup . Press [...]

English-45 Selecting a De vice from Exter nal Sour ces Y our set enables you to choose which audio/video signals are output to the external connector . 1 Press the MENU button. Press the ENTER button to select Input. Result: The options available in the Input group are displayed. 2 Press the ENTER button. Result : The options available in the Sourc[...]

English-46 Once you have connected up your various audio and video systems, you can view the different sources by selecting the appropriate input. 1 Check that all the necessary connections have been made. 2 Press the SOURCE button. Result : The edited device and audio status are displayed on top- left of the set. 3 Press the SOURCE button until th[...]

English-47 Setting up Y our PC Softwar e ( Based on W indows XP ) The Windows display-settings for a typical computer are shown below . But the actual screens on your PC will probably be different, depending upon your particular version of Windows and your particular video card. But even if your actual screen look different, the same, basic set-up [...]

Auto adjustment allows the PC screen of set to self-adjust to the incoming PC video signal. The values of fine, coarse and position are adjusted automatically . Press the PC button under the remote’s cover to select the PC mode. 1 Press the MENU button. Result : The main menu is displayed. 2 Press the or button to select Setup . Press the ENTER b[...]

English-49 Coar se and Fine T uning of the Ima ge The purpose of picture quality adjustment is to remove or reduce picture noise. If the noise is not removed by Fine-tuning alone, then adjust the frequency as best as possible (coarse) and Fine-tune again. After the noise has been reduced, re-adjust the picture so that it is aligned on the center of[...]

English-50 Changing the Image P osition Press the PC button under the remote’s cover to select the PC mode. 1 Press the MENU button. Result : The main menu is displayed. 2 Press the or button to select Setup . Press the ENTER button. Result : The options available in the Setup group are displayed. 3 Press the or button to select PC . Press the EN[...]

English-51 Initializing the Image Settings Y ou can replace all image settings with the factory default values. Press the PC button under the remote’s cover to select the PC mode. 1 Press the MENU button. Result : The main menu is displayed. 2 Press the or button to select Setup . Press the ENTER button. Result : The options available in the Setu[...]

English-52 T eletext Decoder Most set channels carry “ teletext ”, pages of written information that provide information such as: T elevision programme times. News bulletins and Weather forecasts. Sports results. Subtitles for the hard of hearing. The teletext pages are organized according to six categories: Part Contents A Selected page number[...]

Press the number buttons on the remote control to enter the page number directly: 1 Enter the three-digit page number listed in the contents by pressing the corresponding numeric buttons. Result : The current page counter is incremented and the page is then displayed. 2 If the selected page is linked with several secondary pages, the secondary page[...]

English-54 Using F aste xt to Select a T elete xt Page The various topics included in the teletext pages are colour-coded, and can be selected by pressing the coloured buttons on the remote control. 1 Display the teletext contents page by pressing the TTX/MIX ( / ) button. 2 Press the coloured button corresponding to the topic that you wish to sele[...]

English-55 Setting Up Y our R emote Control After it has been set up properly, your remote control can operate in five different modes: TV , VCR, Cable, DVD, Set-Top Box. Pressing the corresponding button on the remote control allows you to switch between these modes, and control whichever piece of equipment you choose. Note The remote control migh[...]

English-56 Setting Up Y our R emote Control Setting Up the Remote to Operate Your Cable Box 1 T urn off your cable box. 2 Press the MODE button and make sure that the CA TV appears on the LCD screen. 3 Press the SET button on your TV’s remote control. 4 Using the number buttons on your remote control, enter three digits of the cable box code list[...]

English-57 Setting Up Y our R emote Control Setting Up the Remote to Operate Your DVD 1 T urn off your DVD. 2 Press the MODE button and make sure that the DVD appears on the LCD screen. 3 Press the SET button on your TV’s remote control. 4 Using the number buttons on your remote control, enter three digits of the DVD code listed on page 58 of thi[...]

English-58 Setting Up Y our R emote Control Remote Control Codes Brand Aiwa Curtis Mathes Funai GE Hitachi JC Penny Kenwood Magnavox Marantz NEC Panasonic Philco Philips Pioneer RCA Samsung Sanyo Sears Sharp Sony Sylvania T oshiba Code 025 002 017 007 008 021 025 056 064 066 025 017 002 021 005 056 019 025 041 042 002 007 018 019 021 026 037 041 05[...]

English-59 T r oubleshooting: Before Contacting Ser vice Personnel Before contacting Samsung after-sales service, perform the following simple checks. If you cannot solve the problem using the instructions below , note the model and serial number of your set and contact your local dealer . No sound or picture Normal picture but no sound No picture [...]

English-60 Installing the Wall Mount Kit This installation is to be used when attaching the wall mount to a concrete wall. When attaching to other building materials, please contact your nearest dealer . Components (Sold separately) W all-Bracket Set-Bracket Screw: 8EA Wood Screw: 7EA Anchor: 7EA Screw: 3EA Installation Guide How to assemble the W [...]

English-61 Installing the Wall Mount Kit 2 T urn the power off and unplug the power cord from the outlet. Place the TV faced down on a soft cloth or cushion on a table. Remove the four screws from the back of the TV . Separate the stand from the TV . Cover the bottom hole with a cap Loosen two screws on the rear side of the TV set (only model LE40M[...]

English-62 Installing the Stand 1. Place the TV faced down on a soft cloth or cushion on a table. 2. Attach the stand to the TV set as shown in the picture. 3. Use the four screws to tightly fix the stand. < 2 > < 3 > 02 BN68-00956A-00Eng.qxd 7/19/05 9:05 AM Page 62[...]

English-63 Using the Anti-T heft K ensington Loc k 1. Insert the locking device into the Kensington slot on the LCD TV (Figure 1), and turn it in the locking direction (Figure 2). 2. Connect the Kensington lock cable. 3. Fix the Kensington lock to a desk or a heavy stationary object. The Kensington lock is a device used to physically fix the system[...]

English-64 T echnical and En vir onmental Specifica tions Model Name LE32M6 LE40M6 Panel Size 32" Diagonal (16:9) 40" Diagonal (16:9) Display Size 697.68 (H) x 392.26 (V) mm 885.17(H) x 497.66(V) mm (27.47 (H) x 15.44 (V) inches) (34.85(H) x 19.59(V) inches) T ype a-si TFT active matrix a-si TFT active matrix Pixel Pitch 0.51 1 (H) x 0.51[...]

English-65 T echnical and En vir onmental Specifica tions Display Mode (PC) Model LE32M6 LE40M6 Weight With stand 19.2 kg (42.33 lbs) 27.5 kg (60.63 lbs) Environmental Considerations Operating T emperature 0°C to 40°C (50°F to 104°F) 10°C to 40°C (50°F to 104°F) Operating Humidity 10% to 80%, non-condensing 10% to 80%, non-condensing Storag[...]

English-66 Pin Configur ations SCART Connector Pin Signal 1 Audio output R 2 Audio input R 3 Audio output L 4 Audio chassis return 5 V ideo chassis return (RGB blue) 6 Audio input L 7 RGB blue input 8 Switching voltage 9 V ideo chassis return (RGB green) 10 A V-Link (Ext 1) 1 1 RGB green input Pin Signal 12 - 13 Video chassis return (RGB red) 14 - [...]

Memo 02 BN68-00956A-00Eng.qxd 7/19/05 9:05 AM Page 67[...]